mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-09 13:36:40 +07:00
67a37308ae
The new-style dme1737 driver implements the optional detect() callback to cover the use cases of the legacy driver. I don't actually expect any new-style device for that driver, but as the old i2c API is going away soon, we have to switch to the new one. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Juerg Haefliger <juergh@gmail.com>
2547 lines
73 KiB
C
2547 lines
73 KiB
C
/*
|
|
* dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x and
|
|
* SCH5027 Super-I/O chips integrated hardware monitoring features.
|
|
* Copyright (c) 2007, 2008 Juerg Haefliger <juergh@gmail.com>
|
|
*
|
|
* This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access
|
|
* the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus
|
|
* if a SCH311x chip is found. Both types of chips have very similar hardware
|
|
* monitoring capabilities but differ in the way they can be accessed.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <asm/io.h>
|
|
|
|
/* ISA device, if found */
|
|
static struct platform_device *pdev;
|
|
|
|
/* Module load parameters */
|
|
static int force_start;
|
|
module_param(force_start, bool, 0);
|
|
MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs");
|
|
|
|
static unsigned short force_id;
|
|
module_param(force_id, ushort, 0);
|
|
MODULE_PARM_DESC(force_id, "Override the detected device ID");
|
|
|
|
static int probe_all_addr;
|
|
module_param(probe_all_addr, bool, 0);
|
|
MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
|
|
"addresses");
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
|
|
|
|
/* Insmod parameters */
|
|
I2C_CLIENT_INSMOD_2(dme1737, sch5027);
|
|
|
|
/* ISA chip types */
|
|
enum isa_chips { sch311x = sch5027 + 1 };
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Registers
|
|
*
|
|
* The sensors are defined as follows:
|
|
*
|
|
* Voltages Temperatures
|
|
* -------- ------------
|
|
* in0 +5VTR (+5V stdby) temp1 Remote diode 1
|
|
* in1 Vccp (proc core) temp2 Internal temp
|
|
* in2 VCC (internal +3.3V) temp3 Remote diode 2
|
|
* in3 +5V
|
|
* in4 +12V
|
|
* in5 VTR (+3.3V stby)
|
|
* in6 Vbat
|
|
*
|
|
* --------------------------------------------------------------------- */
|
|
|
|
/* Voltages (in) numbered 0-6 (ix) */
|
|
#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) \
|
|
: 0x94 + (ix))
|
|
#define DME1737_REG_IN_MIN(ix) ((ix) < 5 ? 0x44 + (ix) * 2 \
|
|
: 0x91 + (ix) * 2)
|
|
#define DME1737_REG_IN_MAX(ix) ((ix) < 5 ? 0x45 + (ix) * 2 \
|
|
: 0x92 + (ix) * 2)
|
|
|
|
/* Temperatures (temp) numbered 0-2 (ix) */
|
|
#define DME1737_REG_TEMP(ix) (0x25 + (ix))
|
|
#define DME1737_REG_TEMP_MIN(ix) (0x4e + (ix) * 2)
|
|
#define DME1737_REG_TEMP_MAX(ix) (0x4f + (ix) * 2)
|
|
#define DME1737_REG_TEMP_OFFSET(ix) ((ix) == 0 ? 0x1f \
|
|
: 0x1c + (ix))
|
|
|
|
/* Voltage and temperature LSBs
|
|
* The LSBs (4 bits each) are stored in 5 registers with the following layouts:
|
|
* IN_TEMP_LSB(0) = [in5, in6]
|
|
* IN_TEMP_LSB(1) = [temp3, temp1]
|
|
* IN_TEMP_LSB(2) = [in4, temp2]
|
|
* IN_TEMP_LSB(3) = [in3, in0]
|
|
* IN_TEMP_LSB(4) = [in2, in1] */
|
|
#define DME1737_REG_IN_TEMP_LSB(ix) (0x84 + (ix))
|
|
static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0};
|
|
static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4};
|
|
static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
|
|
static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
|
|
|
|
/* Fans numbered 0-5 (ix) */
|
|
#define DME1737_REG_FAN(ix) ((ix) < 4 ? 0x28 + (ix) * 2 \
|
|
: 0xa1 + (ix) * 2)
|
|
#define DME1737_REG_FAN_MIN(ix) ((ix) < 4 ? 0x54 + (ix) * 2 \
|
|
: 0xa5 + (ix) * 2)
|
|
#define DME1737_REG_FAN_OPT(ix) ((ix) < 4 ? 0x90 + (ix) \
|
|
: 0xb2 + (ix))
|
|
#define DME1737_REG_FAN_MAX(ix) (0xb4 + (ix)) /* only for fan[4-5] */
|
|
|
|
/* PWMs numbered 0-2, 4-5 (ix) */
|
|
#define DME1737_REG_PWM(ix) ((ix) < 3 ? 0x30 + (ix) \
|
|
: 0xa1 + (ix))
|
|
#define DME1737_REG_PWM_CONFIG(ix) (0x5c + (ix)) /* only for pwm[0-2] */
|
|
#define DME1737_REG_PWM_MIN(ix) (0x64 + (ix)) /* only for pwm[0-2] */
|
|
#define DME1737_REG_PWM_FREQ(ix) ((ix) < 3 ? 0x5f + (ix) \
|
|
: 0xa3 + (ix))
|
|
/* The layout of the ramp rate registers is different from the other pwm
|
|
* registers. The bits for the 3 PWMs are stored in 2 registers:
|
|
* PWM_RR(0) = [OFF3, OFF2, OFF1, RES, RR1E, RR1-2, RR1-1, RR1-0]
|
|
* PWM_RR(1) = [RR2E, RR2-2, RR2-1, RR2-0, RR3E, RR3-2, RR3-1, RR3-0] */
|
|
#define DME1737_REG_PWM_RR(ix) (0x62 + (ix)) /* only for pwm[0-2] */
|
|
|
|
/* Thermal zones 0-2 */
|
|
#define DME1737_REG_ZONE_LOW(ix) (0x67 + (ix))
|
|
#define DME1737_REG_ZONE_ABS(ix) (0x6a + (ix))
|
|
/* The layout of the hysteresis registers is different from the other zone
|
|
* registers. The bits for the 3 zones are stored in 2 registers:
|
|
* ZONE_HYST(0) = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
|
|
* ZONE_HYST(1) = [H3-3, H3-2, H3-1, H3-0, RES, RES, RES, RES] */
|
|
#define DME1737_REG_ZONE_HYST(ix) (0x6d + (ix))
|
|
|
|
/* Alarm registers and bit mapping
|
|
* The 3 8-bit alarm registers will be concatenated to a single 32-bit
|
|
* alarm value [0, ALARM3, ALARM2, ALARM1]. */
|
|
#define DME1737_REG_ALARM1 0x41
|
|
#define DME1737_REG_ALARM2 0x42
|
|
#define DME1737_REG_ALARM3 0x83
|
|
static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17};
|
|
static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
|
|
static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
|
|
|
|
/* Miscellaneous registers */
|
|
#define DME1737_REG_DEVICE 0x3d
|
|
#define DME1737_REG_COMPANY 0x3e
|
|
#define DME1737_REG_VERSTEP 0x3f
|
|
#define DME1737_REG_CONFIG 0x40
|
|
#define DME1737_REG_CONFIG2 0x7f
|
|
#define DME1737_REG_VID 0x43
|
|
#define DME1737_REG_TACH_PWM 0x81
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Misc defines
|
|
* --------------------------------------------------------------------- */
|
|
|
|
/* Chip identification */
|
|
#define DME1737_COMPANY_SMSC 0x5c
|
|
#define DME1737_VERSTEP 0x88
|
|
#define DME1737_VERSTEP_MASK 0xf8
|
|
#define SCH311X_DEVICE 0x8c
|
|
#define SCH5027_VERSTEP 0x69
|
|
|
|
/* Length of ISA address segment */
|
|
#define DME1737_EXTENT 2
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Data structures and manipulation thereof
|
|
* --------------------------------------------------------------------- */
|
|
|
|
struct dme1737_data {
|
|
struct i2c_client *client; /* for I2C devices only */
|
|
struct device *hwmon_dev;
|
|
const char *name;
|
|
unsigned int addr; /* for ISA devices only */
|
|
|
|
struct mutex update_lock;
|
|
int valid; /* !=0 if following fields are valid */
|
|
unsigned long last_update; /* in jiffies */
|
|
unsigned long last_vbat; /* in jiffies */
|
|
enum chips type;
|
|
const int *in_nominal; /* pointer to IN_NOMINAL array */
|
|
|
|
u8 vid;
|
|
u8 pwm_rr_en;
|
|
u8 has_pwm;
|
|
u8 has_fan;
|
|
|
|
/* Register values */
|
|
u16 in[7];
|
|
u8 in_min[7];
|
|
u8 in_max[7];
|
|
s16 temp[3];
|
|
s8 temp_min[3];
|
|
s8 temp_max[3];
|
|
s8 temp_offset[3];
|
|
u8 config;
|
|
u8 config2;
|
|
u8 vrm;
|
|
u16 fan[6];
|
|
u16 fan_min[6];
|
|
u8 fan_max[2];
|
|
u8 fan_opt[6];
|
|
u8 pwm[6];
|
|
u8 pwm_min[3];
|
|
u8 pwm_config[3];
|
|
u8 pwm_acz[3];
|
|
u8 pwm_freq[6];
|
|
u8 pwm_rr[2];
|
|
u8 zone_low[3];
|
|
u8 zone_abs[3];
|
|
u8 zone_hyst[2];
|
|
u32 alarms;
|
|
};
|
|
|
|
/* Nominal voltage values */
|
|
static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300,
|
|
3300};
|
|
static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
|
|
3300};
|
|
static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
|
|
3300};
|
|
#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \
|
|
(type) == sch5027 ? IN_NOMINAL_SCH5027 : \
|
|
IN_NOMINAL_DME1737)
|
|
|
|
/* Voltage input
|
|
* Voltage inputs have 16 bits resolution, limit values have 8 bits
|
|
* resolution. */
|
|
static inline int IN_FROM_REG(int reg, int nominal, int res)
|
|
{
|
|
return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2));
|
|
}
|
|
|
|
static inline int IN_TO_REG(int val, int nominal)
|
|
{
|
|
return SENSORS_LIMIT((val * 192 + nominal / 2) / nominal, 0, 255);
|
|
}
|
|
|
|
/* Temperature input
|
|
* The register values represent temperatures in 2's complement notation from
|
|
* -127 degrees C to +127 degrees C. Temp inputs have 16 bits resolution, limit
|
|
* values have 8 bits resolution. */
|
|
static inline int TEMP_FROM_REG(int reg, int res)
|
|
{
|
|
return (reg * 1000) >> (res - 8);
|
|
}
|
|
|
|
static inline int TEMP_TO_REG(int val)
|
|
{
|
|
return SENSORS_LIMIT((val < 0 ? val - 500 : val + 500) / 1000,
|
|
-128, 127);
|
|
}
|
|
|
|
/* Temperature range */
|
|
static const int TEMP_RANGE[] = {2000, 2500, 3333, 4000, 5000, 6666, 8000,
|
|
10000, 13333, 16000, 20000, 26666, 32000,
|
|
40000, 53333, 80000};
|
|
|
|
static inline int TEMP_RANGE_FROM_REG(int reg)
|
|
{
|
|
return TEMP_RANGE[(reg >> 4) & 0x0f];
|
|
}
|
|
|
|
static int TEMP_RANGE_TO_REG(int val, int reg)
|
|
{
|
|
int i;
|
|
|
|
for (i = 15; i > 0; i--) {
|
|
if (val > (TEMP_RANGE[i] + TEMP_RANGE[i - 1] + 1) / 2) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (reg & 0x0f) | (i << 4);
|
|
}
|
|
|
|
/* Temperature hysteresis
|
|
* Register layout:
|
|
* reg[0] = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
|
|
* reg[1] = [H3-3, H3-2, H3-1, H3-0, xxxx, xxxx, xxxx, xxxx] */
|
|
static inline int TEMP_HYST_FROM_REG(int reg, int ix)
|
|
{
|
|
return (((ix == 1) ? reg : reg >> 4) & 0x0f) * 1000;
|
|
}
|
|
|
|
static inline int TEMP_HYST_TO_REG(int val, int ix, int reg)
|
|
{
|
|
int hyst = SENSORS_LIMIT((val + 500) / 1000, 0, 15);
|
|
|
|
return (ix == 1) ? (reg & 0xf0) | hyst : (reg & 0x0f) | (hyst << 4);
|
|
}
|
|
|
|
/* Fan input RPM */
|
|
static inline int FAN_FROM_REG(int reg, int tpc)
|
|
{
|
|
if (tpc) {
|
|
return tpc * reg;
|
|
} else {
|
|
return (reg == 0 || reg == 0xffff) ? 0 : 90000 * 60 / reg;
|
|
}
|
|
}
|
|
|
|
static inline int FAN_TO_REG(int val, int tpc)
|
|
{
|
|
if (tpc) {
|
|
return SENSORS_LIMIT(val / tpc, 0, 0xffff);
|
|
} else {
|
|
return (val <= 0) ? 0xffff :
|
|
SENSORS_LIMIT(90000 * 60 / val, 0, 0xfffe);
|
|
}
|
|
}
|
|
|
|
/* Fan TPC (tach pulse count)
|
|
* Converts a register value to a TPC multiplier or returns 0 if the tachometer
|
|
* is configured in legacy (non-tpc) mode */
|
|
static inline int FAN_TPC_FROM_REG(int reg)
|
|
{
|
|
return (reg & 0x20) ? 0 : 60 >> (reg & 0x03);
|
|
}
|
|
|
|
/* Fan type
|
|
* The type of a fan is expressed in number of pulses-per-revolution that it
|
|
* emits */
|
|
static inline int FAN_TYPE_FROM_REG(int reg)
|
|
{
|
|
int edge = (reg >> 1) & 0x03;
|
|
|
|
return (edge > 0) ? 1 << (edge - 1) : 0;
|
|
}
|
|
|
|
static inline int FAN_TYPE_TO_REG(int val, int reg)
|
|
{
|
|
int edge = (val == 4) ? 3 : val;
|
|
|
|
return (reg & 0xf9) | (edge << 1);
|
|
}
|
|
|
|
/* Fan max RPM */
|
|
static const int FAN_MAX[] = {0x54, 0x38, 0x2a, 0x21, 0x1c, 0x18, 0x15, 0x12,
|
|
0x11, 0x0f, 0x0e};
|
|
|
|
static int FAN_MAX_FROM_REG(int reg)
|
|
{
|
|
int i;
|
|
|
|
for (i = 10; i > 0; i--) {
|
|
if (reg == FAN_MAX[i]) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 1000 + i * 500;
|
|
}
|
|
|
|
static int FAN_MAX_TO_REG(int val)
|
|
{
|
|
int i;
|
|
|
|
for (i = 10; i > 0; i--) {
|
|
if (val > (1000 + (i - 1) * 500)) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return FAN_MAX[i];
|
|
}
|
|
|
|
/* PWM enable
|
|
* Register to enable mapping:
|
|
* 000: 2 fan on zone 1 auto
|
|
* 001: 2 fan on zone 2 auto
|
|
* 010: 2 fan on zone 3 auto
|
|
* 011: 0 fan full on
|
|
* 100: -1 fan disabled
|
|
* 101: 2 fan on hottest of zones 2,3 auto
|
|
* 110: 2 fan on hottest of zones 1,2,3 auto
|
|
* 111: 1 fan in manual mode */
|
|
static inline int PWM_EN_FROM_REG(int reg)
|
|
{
|
|
static const int en[] = {2, 2, 2, 0, -1, 2, 2, 1};
|
|
|
|
return en[(reg >> 5) & 0x07];
|
|
}
|
|
|
|
static inline int PWM_EN_TO_REG(int val, int reg)
|
|
{
|
|
int en = (val == 1) ? 7 : 3;
|
|
|
|
return (reg & 0x1f) | ((en & 0x07) << 5);
|
|
}
|
|
|
|
/* PWM auto channels zone
|
|
* Register to auto channels zone mapping (ACZ is a bitfield with bit x
|
|
* corresponding to zone x+1):
|
|
* 000: 001 fan on zone 1 auto
|
|
* 001: 010 fan on zone 2 auto
|
|
* 010: 100 fan on zone 3 auto
|
|
* 011: 000 fan full on
|
|
* 100: 000 fan disabled
|
|
* 101: 110 fan on hottest of zones 2,3 auto
|
|
* 110: 111 fan on hottest of zones 1,2,3 auto
|
|
* 111: 000 fan in manual mode */
|
|
static inline int PWM_ACZ_FROM_REG(int reg)
|
|
{
|
|
static const int acz[] = {1, 2, 4, 0, 0, 6, 7, 0};
|
|
|
|
return acz[(reg >> 5) & 0x07];
|
|
}
|
|
|
|
static inline int PWM_ACZ_TO_REG(int val, int reg)
|
|
{
|
|
int acz = (val == 4) ? 2 : val - 1;
|
|
|
|
return (reg & 0x1f) | ((acz & 0x07) << 5);
|
|
}
|
|
|
|
/* PWM frequency */
|
|
static const int PWM_FREQ[] = {11, 15, 22, 29, 35, 44, 59, 88,
|
|
15000, 20000, 30000, 25000, 0, 0, 0, 0};
|
|
|
|
static inline int PWM_FREQ_FROM_REG(int reg)
|
|
{
|
|
return PWM_FREQ[reg & 0x0f];
|
|
}
|
|
|
|
static int PWM_FREQ_TO_REG(int val, int reg)
|
|
{
|
|
int i;
|
|
|
|
/* the first two cases are special - stupid chip design! */
|
|
if (val > 27500) {
|
|
i = 10;
|
|
} else if (val > 22500) {
|
|
i = 11;
|
|
} else {
|
|
for (i = 9; i > 0; i--) {
|
|
if (val > (PWM_FREQ[i] + PWM_FREQ[i - 1] + 1) / 2) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (reg & 0xf0) | i;
|
|
}
|
|
|
|
/* PWM ramp rate
|
|
* Register layout:
|
|
* reg[0] = [OFF3, OFF2, OFF1, RES, RR1-E, RR1-2, RR1-1, RR1-0]
|
|
* reg[1] = [RR2-E, RR2-2, RR2-1, RR2-0, RR3-E, RR3-2, RR3-1, RR3-0] */
|
|
static const u8 PWM_RR[] = {206, 104, 69, 41, 26, 18, 10, 5};
|
|
|
|
static inline int PWM_RR_FROM_REG(int reg, int ix)
|
|
{
|
|
int rr = (ix == 1) ? reg >> 4 : reg;
|
|
|
|
return (rr & 0x08) ? PWM_RR[rr & 0x07] : 0;
|
|
}
|
|
|
|
static int PWM_RR_TO_REG(int val, int ix, int reg)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 7; i++) {
|
|
if (val > (PWM_RR[i] + PWM_RR[i + 1] + 1) / 2) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (ix == 1) ? (reg & 0x8f) | (i << 4) : (reg & 0xf8) | i;
|
|
}
|
|
|
|
/* PWM ramp rate enable */
|
|
static inline int PWM_RR_EN_FROM_REG(int reg, int ix)
|
|
{
|
|
return PWM_RR_FROM_REG(reg, ix) ? 1 : 0;
|
|
}
|
|
|
|
static inline int PWM_RR_EN_TO_REG(int val, int ix, int reg)
|
|
{
|
|
int en = (ix == 1) ? 0x80 : 0x08;
|
|
|
|
return val ? reg | en : reg & ~en;
|
|
}
|
|
|
|
/* PWM min/off
|
|
* The PWM min/off bits are part of the PMW ramp rate register 0 (see above for
|
|
* the register layout). */
|
|
static inline int PWM_OFF_FROM_REG(int reg, int ix)
|
|
{
|
|
return (reg >> (ix + 5)) & 0x01;
|
|
}
|
|
|
|
static inline int PWM_OFF_TO_REG(int val, int ix, int reg)
|
|
{
|
|
return (reg & ~(1 << (ix + 5))) | ((val & 0x01) << (ix + 5));
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Device I/O access
|
|
*
|
|
* ISA access is performed through an index/data register pair and needs to
|
|
* be protected by a mutex during runtime (not required for initialization).
|
|
* We use data->update_lock for this and need to ensure that we acquire it
|
|
* before calling dme1737_read or dme1737_write.
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static u8 dme1737_read(const struct dme1737_data *data, u8 reg)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
s32 val;
|
|
|
|
if (client) { /* I2C device */
|
|
val = i2c_smbus_read_byte_data(client, reg);
|
|
|
|
if (val < 0) {
|
|
dev_warn(&client->dev, "Read from register "
|
|
"0x%02x failed! Please report to the driver "
|
|
"maintainer.\n", reg);
|
|
}
|
|
} else { /* ISA device */
|
|
outb(reg, data->addr);
|
|
val = inb(data->addr + 1);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static s32 dme1737_write(const struct dme1737_data *data, u8 reg, u8 val)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
s32 res = 0;
|
|
|
|
if (client) { /* I2C device */
|
|
res = i2c_smbus_write_byte_data(client, reg, val);
|
|
|
|
if (res < 0) {
|
|
dev_warn(&client->dev, "Write to register "
|
|
"0x%02x failed! Please report to the driver "
|
|
"maintainer.\n", reg);
|
|
}
|
|
} else { /* ISA device */
|
|
outb(reg, data->addr);
|
|
outb(val, data->addr + 1);
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static struct dme1737_data *dme1737_update_device(struct device *dev)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
int ix;
|
|
u8 lsb[5];
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* Enable a Vbat monitoring cycle every 10 mins */
|
|
if (time_after(jiffies, data->last_vbat + 600 * HZ) || !data->valid) {
|
|
dme1737_write(data, DME1737_REG_CONFIG, dme1737_read(data,
|
|
DME1737_REG_CONFIG) | 0x10);
|
|
data->last_vbat = jiffies;
|
|
}
|
|
|
|
/* Sample register contents every 1 sec */
|
|
if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
|
|
if (data->type != sch5027) {
|
|
data->vid = dme1737_read(data, DME1737_REG_VID) &
|
|
0x3f;
|
|
}
|
|
|
|
/* In (voltage) registers */
|
|
for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
|
|
/* Voltage inputs are stored as 16 bit values even
|
|
* though they have only 12 bits resolution. This is
|
|
* to make it consistent with the temp inputs. */
|
|
data->in[ix] = dme1737_read(data,
|
|
DME1737_REG_IN(ix)) << 8;
|
|
data->in_min[ix] = dme1737_read(data,
|
|
DME1737_REG_IN_MIN(ix));
|
|
data->in_max[ix] = dme1737_read(data,
|
|
DME1737_REG_IN_MAX(ix));
|
|
}
|
|
|
|
/* Temp registers */
|
|
for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
|
|
/* Temp inputs are stored as 16 bit values even
|
|
* though they have only 12 bits resolution. This is
|
|
* to take advantage of implicit conversions between
|
|
* register values (2's complement) and temp values
|
|
* (signed decimal). */
|
|
data->temp[ix] = dme1737_read(data,
|
|
DME1737_REG_TEMP(ix)) << 8;
|
|
data->temp_min[ix] = dme1737_read(data,
|
|
DME1737_REG_TEMP_MIN(ix));
|
|
data->temp_max[ix] = dme1737_read(data,
|
|
DME1737_REG_TEMP_MAX(ix));
|
|
if (data->type != sch5027) {
|
|
data->temp_offset[ix] = dme1737_read(data,
|
|
DME1737_REG_TEMP_OFFSET(ix));
|
|
}
|
|
}
|
|
|
|
/* In and temp LSB registers
|
|
* The LSBs are latched when the MSBs are read, so the order in
|
|
* which the registers are read (MSB first, then LSB) is
|
|
* important! */
|
|
for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
|
|
lsb[ix] = dme1737_read(data,
|
|
DME1737_REG_IN_TEMP_LSB(ix));
|
|
}
|
|
for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
|
|
data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
|
|
DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
|
|
}
|
|
for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
|
|
data->temp[ix] |= (lsb[DME1737_REG_TEMP_LSB[ix]] <<
|
|
DME1737_REG_TEMP_LSB_SHL[ix]) & 0xf0;
|
|
}
|
|
|
|
/* Fan registers */
|
|
for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) {
|
|
/* Skip reading registers if optional fans are not
|
|
* present */
|
|
if (!(data->has_fan & (1 << ix))) {
|
|
continue;
|
|
}
|
|
data->fan[ix] = dme1737_read(data,
|
|
DME1737_REG_FAN(ix));
|
|
data->fan[ix] |= dme1737_read(data,
|
|
DME1737_REG_FAN(ix) + 1) << 8;
|
|
data->fan_min[ix] = dme1737_read(data,
|
|
DME1737_REG_FAN_MIN(ix));
|
|
data->fan_min[ix] |= dme1737_read(data,
|
|
DME1737_REG_FAN_MIN(ix) + 1) << 8;
|
|
data->fan_opt[ix] = dme1737_read(data,
|
|
DME1737_REG_FAN_OPT(ix));
|
|
/* fan_max exists only for fan[5-6] */
|
|
if (ix > 3) {
|
|
data->fan_max[ix - 4] = dme1737_read(data,
|
|
DME1737_REG_FAN_MAX(ix));
|
|
}
|
|
}
|
|
|
|
/* PWM registers */
|
|
for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) {
|
|
/* Skip reading registers if optional PWMs are not
|
|
* present */
|
|
if (!(data->has_pwm & (1 << ix))) {
|
|
continue;
|
|
}
|
|
data->pwm[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM(ix));
|
|
data->pwm_freq[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_FREQ(ix));
|
|
/* pwm_config and pwm_min exist only for pwm[1-3] */
|
|
if (ix < 3) {
|
|
data->pwm_config[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_CONFIG(ix));
|
|
data->pwm_min[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_MIN(ix));
|
|
}
|
|
}
|
|
for (ix = 0; ix < ARRAY_SIZE(data->pwm_rr); ix++) {
|
|
data->pwm_rr[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_RR(ix));
|
|
}
|
|
|
|
/* Thermal zone registers */
|
|
for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) {
|
|
data->zone_low[ix] = dme1737_read(data,
|
|
DME1737_REG_ZONE_LOW(ix));
|
|
data->zone_abs[ix] = dme1737_read(data,
|
|
DME1737_REG_ZONE_ABS(ix));
|
|
}
|
|
if (data->type != sch5027) {
|
|
for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
|
|
data->zone_hyst[ix] = dme1737_read(data,
|
|
DME1737_REG_ZONE_HYST(ix));
|
|
}
|
|
}
|
|
|
|
/* Alarm registers */
|
|
data->alarms = dme1737_read(data,
|
|
DME1737_REG_ALARM1);
|
|
/* Bit 7 tells us if the other alarm registers are non-zero and
|
|
* therefore also need to be read */
|
|
if (data->alarms & 0x80) {
|
|
data->alarms |= dme1737_read(data,
|
|
DME1737_REG_ALARM2) << 8;
|
|
data->alarms |= dme1737_read(data,
|
|
DME1737_REG_ALARM3) << 16;
|
|
}
|
|
|
|
/* The ISA chips require explicit clearing of alarm bits.
|
|
* Don't worry, an alarm will come back if the condition
|
|
* that causes it still exists */
|
|
if (!data->client) {
|
|
if (data->alarms & 0xff0000) {
|
|
dme1737_write(data, DME1737_REG_ALARM3,
|
|
0xff);
|
|
}
|
|
if (data->alarms & 0xff00) {
|
|
dme1737_write(data, DME1737_REG_ALARM2,
|
|
0xff);
|
|
}
|
|
if (data->alarms & 0xff) {
|
|
dme1737_write(data, DME1737_REG_ALARM1,
|
|
0xff);
|
|
}
|
|
}
|
|
|
|
data->last_update = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Voltage sysfs attributes
|
|
* ix = [0-5]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SYS_IN_INPUT 0
|
|
#define SYS_IN_MIN 1
|
|
#define SYS_IN_MAX 2
|
|
#define SYS_IN_ALARM 3
|
|
|
|
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct dme1737_data *data = dme1737_update_device(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SYS_IN_INPUT:
|
|
res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16);
|
|
break;
|
|
case SYS_IN_MIN:
|
|
res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8);
|
|
break;
|
|
case SYS_IN_MAX:
|
|
res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8);
|
|
break;
|
|
case SYS_IN_ALARM:
|
|
res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static ssize_t set_in(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (fn) {
|
|
case SYS_IN_MIN:
|
|
data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]);
|
|
dme1737_write(data, DME1737_REG_IN_MIN(ix),
|
|
data->in_min[ix]);
|
|
break;
|
|
case SYS_IN_MAX:
|
|
data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]);
|
|
dme1737_write(data, DME1737_REG_IN_MAX(ix),
|
|
data->in_max[ix]);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Temperature sysfs attributes
|
|
* ix = [0-2]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SYS_TEMP_INPUT 0
|
|
#define SYS_TEMP_MIN 1
|
|
#define SYS_TEMP_MAX 2
|
|
#define SYS_TEMP_OFFSET 3
|
|
#define SYS_TEMP_ALARM 4
|
|
#define SYS_TEMP_FAULT 5
|
|
|
|
static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct dme1737_data *data = dme1737_update_device(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SYS_TEMP_INPUT:
|
|
res = TEMP_FROM_REG(data->temp[ix], 16);
|
|
break;
|
|
case SYS_TEMP_MIN:
|
|
res = TEMP_FROM_REG(data->temp_min[ix], 8);
|
|
break;
|
|
case SYS_TEMP_MAX:
|
|
res = TEMP_FROM_REG(data->temp_max[ix], 8);
|
|
break;
|
|
case SYS_TEMP_OFFSET:
|
|
res = TEMP_FROM_REG(data->temp_offset[ix], 8);
|
|
break;
|
|
case SYS_TEMP_ALARM:
|
|
res = (data->alarms >> DME1737_BIT_ALARM_TEMP[ix]) & 0x01;
|
|
break;
|
|
case SYS_TEMP_FAULT:
|
|
res = (((u16)data->temp[ix] & 0xff00) == 0x8000);
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (fn) {
|
|
case SYS_TEMP_MIN:
|
|
data->temp_min[ix] = TEMP_TO_REG(val);
|
|
dme1737_write(data, DME1737_REG_TEMP_MIN(ix),
|
|
data->temp_min[ix]);
|
|
break;
|
|
case SYS_TEMP_MAX:
|
|
data->temp_max[ix] = TEMP_TO_REG(val);
|
|
dme1737_write(data, DME1737_REG_TEMP_MAX(ix),
|
|
data->temp_max[ix]);
|
|
break;
|
|
case SYS_TEMP_OFFSET:
|
|
data->temp_offset[ix] = TEMP_TO_REG(val);
|
|
dme1737_write(data, DME1737_REG_TEMP_OFFSET(ix),
|
|
data->temp_offset[ix]);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Zone sysfs attributes
|
|
* ix = [0-2]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SYS_ZONE_AUTO_CHANNELS_TEMP 0
|
|
#define SYS_ZONE_AUTO_POINT1_TEMP_HYST 1
|
|
#define SYS_ZONE_AUTO_POINT1_TEMP 2
|
|
#define SYS_ZONE_AUTO_POINT2_TEMP 3
|
|
#define SYS_ZONE_AUTO_POINT3_TEMP 4
|
|
|
|
static ssize_t show_zone(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct dme1737_data *data = dme1737_update_device(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SYS_ZONE_AUTO_CHANNELS_TEMP:
|
|
/* check config2 for non-standard temp-to-zone mapping */
|
|
if ((ix == 1) && (data->config2 & 0x02)) {
|
|
res = 4;
|
|
} else {
|
|
res = 1 << ix;
|
|
}
|
|
break;
|
|
case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
|
|
res = TEMP_FROM_REG(data->zone_low[ix], 8) -
|
|
TEMP_HYST_FROM_REG(data->zone_hyst[ix == 2], ix);
|
|
break;
|
|
case SYS_ZONE_AUTO_POINT1_TEMP:
|
|
res = TEMP_FROM_REG(data->zone_low[ix], 8);
|
|
break;
|
|
case SYS_ZONE_AUTO_POINT2_TEMP:
|
|
/* pwm_freq holds the temp range bits in the upper nibble */
|
|
res = TEMP_FROM_REG(data->zone_low[ix], 8) +
|
|
TEMP_RANGE_FROM_REG(data->pwm_freq[ix]);
|
|
break;
|
|
case SYS_ZONE_AUTO_POINT3_TEMP:
|
|
res = TEMP_FROM_REG(data->zone_abs[ix], 8);
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static ssize_t set_zone(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (fn) {
|
|
case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
|
|
/* Refresh the cache */
|
|
data->zone_low[ix] = dme1737_read(data,
|
|
DME1737_REG_ZONE_LOW(ix));
|
|
/* Modify the temp hyst value */
|
|
data->zone_hyst[ix == 2] = TEMP_HYST_TO_REG(
|
|
TEMP_FROM_REG(data->zone_low[ix], 8) -
|
|
val, ix, dme1737_read(data,
|
|
DME1737_REG_ZONE_HYST(ix == 2)));
|
|
dme1737_write(data, DME1737_REG_ZONE_HYST(ix == 2),
|
|
data->zone_hyst[ix == 2]);
|
|
break;
|
|
case SYS_ZONE_AUTO_POINT1_TEMP:
|
|
data->zone_low[ix] = TEMP_TO_REG(val);
|
|
dme1737_write(data, DME1737_REG_ZONE_LOW(ix),
|
|
data->zone_low[ix]);
|
|
break;
|
|
case SYS_ZONE_AUTO_POINT2_TEMP:
|
|
/* Refresh the cache */
|
|
data->zone_low[ix] = dme1737_read(data,
|
|
DME1737_REG_ZONE_LOW(ix));
|
|
/* Modify the temp range value (which is stored in the upper
|
|
* nibble of the pwm_freq register) */
|
|
data->pwm_freq[ix] = TEMP_RANGE_TO_REG(val -
|
|
TEMP_FROM_REG(data->zone_low[ix], 8),
|
|
dme1737_read(data,
|
|
DME1737_REG_PWM_FREQ(ix)));
|
|
dme1737_write(data, DME1737_REG_PWM_FREQ(ix),
|
|
data->pwm_freq[ix]);
|
|
break;
|
|
case SYS_ZONE_AUTO_POINT3_TEMP:
|
|
data->zone_abs[ix] = TEMP_TO_REG(val);
|
|
dme1737_write(data, DME1737_REG_ZONE_ABS(ix),
|
|
data->zone_abs[ix]);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Fan sysfs attributes
|
|
* ix = [0-5]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SYS_FAN_INPUT 0
|
|
#define SYS_FAN_MIN 1
|
|
#define SYS_FAN_MAX 2
|
|
#define SYS_FAN_ALARM 3
|
|
#define SYS_FAN_TYPE 4
|
|
|
|
static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct dme1737_data *data = dme1737_update_device(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SYS_FAN_INPUT:
|
|
res = FAN_FROM_REG(data->fan[ix],
|
|
ix < 4 ? 0 :
|
|
FAN_TPC_FROM_REG(data->fan_opt[ix]));
|
|
break;
|
|
case SYS_FAN_MIN:
|
|
res = FAN_FROM_REG(data->fan_min[ix],
|
|
ix < 4 ? 0 :
|
|
FAN_TPC_FROM_REG(data->fan_opt[ix]));
|
|
break;
|
|
case SYS_FAN_MAX:
|
|
/* only valid for fan[5-6] */
|
|
res = FAN_MAX_FROM_REG(data->fan_max[ix - 4]);
|
|
break;
|
|
case SYS_FAN_ALARM:
|
|
res = (data->alarms >> DME1737_BIT_ALARM_FAN[ix]) & 0x01;
|
|
break;
|
|
case SYS_FAN_TYPE:
|
|
/* only valid for fan[1-4] */
|
|
res = FAN_TYPE_FROM_REG(data->fan_opt[ix]);
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (fn) {
|
|
case SYS_FAN_MIN:
|
|
if (ix < 4) {
|
|
data->fan_min[ix] = FAN_TO_REG(val, 0);
|
|
} else {
|
|
/* Refresh the cache */
|
|
data->fan_opt[ix] = dme1737_read(data,
|
|
DME1737_REG_FAN_OPT(ix));
|
|
/* Modify the fan min value */
|
|
data->fan_min[ix] = FAN_TO_REG(val,
|
|
FAN_TPC_FROM_REG(data->fan_opt[ix]));
|
|
}
|
|
dme1737_write(data, DME1737_REG_FAN_MIN(ix),
|
|
data->fan_min[ix] & 0xff);
|
|
dme1737_write(data, DME1737_REG_FAN_MIN(ix) + 1,
|
|
data->fan_min[ix] >> 8);
|
|
break;
|
|
case SYS_FAN_MAX:
|
|
/* Only valid for fan[5-6] */
|
|
data->fan_max[ix - 4] = FAN_MAX_TO_REG(val);
|
|
dme1737_write(data, DME1737_REG_FAN_MAX(ix),
|
|
data->fan_max[ix - 4]);
|
|
break;
|
|
case SYS_FAN_TYPE:
|
|
/* Only valid for fan[1-4] */
|
|
if (!(val == 1 || val == 2 || val == 4)) {
|
|
count = -EINVAL;
|
|
dev_warn(dev, "Fan type value %ld not "
|
|
"supported. Choose one of 1, 2, or 4.\n",
|
|
val);
|
|
goto exit;
|
|
}
|
|
data->fan_opt[ix] = FAN_TYPE_TO_REG(val, dme1737_read(data,
|
|
DME1737_REG_FAN_OPT(ix)));
|
|
dme1737_write(data, DME1737_REG_FAN_OPT(ix),
|
|
data->fan_opt[ix]);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
exit:
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* PWM sysfs attributes
|
|
* ix = [0-4]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SYS_PWM 0
|
|
#define SYS_PWM_FREQ 1
|
|
#define SYS_PWM_ENABLE 2
|
|
#define SYS_PWM_RAMP_RATE 3
|
|
#define SYS_PWM_AUTO_CHANNELS_ZONE 4
|
|
#define SYS_PWM_AUTO_PWM_MIN 5
|
|
#define SYS_PWM_AUTO_POINT1_PWM 6
|
|
#define SYS_PWM_AUTO_POINT2_PWM 7
|
|
|
|
static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct dme1737_data *data = dme1737_update_device(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SYS_PWM:
|
|
if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 0) {
|
|
res = 255;
|
|
} else {
|
|
res = data->pwm[ix];
|
|
}
|
|
break;
|
|
case SYS_PWM_FREQ:
|
|
res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]);
|
|
break;
|
|
case SYS_PWM_ENABLE:
|
|
if (ix > 3) {
|
|
res = 1; /* pwm[5-6] hard-wired to manual mode */
|
|
} else {
|
|
res = PWM_EN_FROM_REG(data->pwm_config[ix]);
|
|
}
|
|
break;
|
|
case SYS_PWM_RAMP_RATE:
|
|
/* Only valid for pwm[1-3] */
|
|
res = PWM_RR_FROM_REG(data->pwm_rr[ix > 0], ix);
|
|
break;
|
|
case SYS_PWM_AUTO_CHANNELS_ZONE:
|
|
/* Only valid for pwm[1-3] */
|
|
if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
|
|
res = PWM_ACZ_FROM_REG(data->pwm_config[ix]);
|
|
} else {
|
|
res = data->pwm_acz[ix];
|
|
}
|
|
break;
|
|
case SYS_PWM_AUTO_PWM_MIN:
|
|
/* Only valid for pwm[1-3] */
|
|
if (PWM_OFF_FROM_REG(data->pwm_rr[0], ix)) {
|
|
res = data->pwm_min[ix];
|
|
} else {
|
|
res = 0;
|
|
}
|
|
break;
|
|
case SYS_PWM_AUTO_POINT1_PWM:
|
|
/* Only valid for pwm[1-3] */
|
|
res = data->pwm_min[ix];
|
|
break;
|
|
case SYS_PWM_AUTO_POINT2_PWM:
|
|
/* Only valid for pwm[1-3] */
|
|
res = 255; /* hard-wired */
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static struct attribute *dme1737_pwm_chmod_attr[];
|
|
static void dme1737_chmod_file(struct device*, struct attribute*, mode_t);
|
|
|
|
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2
|
|
*sensor_attr_2 = to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (fn) {
|
|
case SYS_PWM:
|
|
data->pwm[ix] = SENSORS_LIMIT(val, 0, 255);
|
|
dme1737_write(data, DME1737_REG_PWM(ix), data->pwm[ix]);
|
|
break;
|
|
case SYS_PWM_FREQ:
|
|
data->pwm_freq[ix] = PWM_FREQ_TO_REG(val, dme1737_read(data,
|
|
DME1737_REG_PWM_FREQ(ix)));
|
|
dme1737_write(data, DME1737_REG_PWM_FREQ(ix),
|
|
data->pwm_freq[ix]);
|
|
break;
|
|
case SYS_PWM_ENABLE:
|
|
/* Only valid for pwm[1-3] */
|
|
if (val < 0 || val > 2) {
|
|
count = -EINVAL;
|
|
dev_warn(dev, "PWM enable %ld not "
|
|
"supported. Choose one of 0, 1, or 2.\n",
|
|
val);
|
|
goto exit;
|
|
}
|
|
/* Refresh the cache */
|
|
data->pwm_config[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_CONFIG(ix));
|
|
if (val == PWM_EN_FROM_REG(data->pwm_config[ix])) {
|
|
/* Bail out if no change */
|
|
goto exit;
|
|
}
|
|
/* Do some housekeeping if we are currently in auto mode */
|
|
if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
|
|
/* Save the current zone channel assignment */
|
|
data->pwm_acz[ix] = PWM_ACZ_FROM_REG(
|
|
data->pwm_config[ix]);
|
|
/* Save the current ramp rate state and disable it */
|
|
data->pwm_rr[ix > 0] = dme1737_read(data,
|
|
DME1737_REG_PWM_RR(ix > 0));
|
|
data->pwm_rr_en &= ~(1 << ix);
|
|
if (PWM_RR_EN_FROM_REG(data->pwm_rr[ix > 0], ix)) {
|
|
data->pwm_rr_en |= (1 << ix);
|
|
data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(0, ix,
|
|
data->pwm_rr[ix > 0]);
|
|
dme1737_write(data,
|
|
DME1737_REG_PWM_RR(ix > 0),
|
|
data->pwm_rr[ix > 0]);
|
|
}
|
|
}
|
|
/* Set the new PWM mode */
|
|
switch (val) {
|
|
case 0:
|
|
/* Change permissions of pwm[ix] to read-only */
|
|
dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
|
|
S_IRUGO);
|
|
/* Turn fan fully on */
|
|
data->pwm_config[ix] = PWM_EN_TO_REG(0,
|
|
data->pwm_config[ix]);
|
|
dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
|
|
data->pwm_config[ix]);
|
|
break;
|
|
case 1:
|
|
/* Turn on manual mode */
|
|
data->pwm_config[ix] = PWM_EN_TO_REG(1,
|
|
data->pwm_config[ix]);
|
|
dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
|
|
data->pwm_config[ix]);
|
|
/* Change permissions of pwm[ix] to read-writeable */
|
|
dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
|
|
S_IRUGO | S_IWUSR);
|
|
break;
|
|
case 2:
|
|
/* Change permissions of pwm[ix] to read-only */
|
|
dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
|
|
S_IRUGO);
|
|
/* Turn on auto mode using the saved zone channel
|
|
* assignment */
|
|
data->pwm_config[ix] = PWM_ACZ_TO_REG(
|
|
data->pwm_acz[ix],
|
|
data->pwm_config[ix]);
|
|
dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
|
|
data->pwm_config[ix]);
|
|
/* Enable PWM ramp rate if previously enabled */
|
|
if (data->pwm_rr_en & (1 << ix)) {
|
|
data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(1, ix,
|
|
dme1737_read(data,
|
|
DME1737_REG_PWM_RR(ix > 0)));
|
|
dme1737_write(data,
|
|
DME1737_REG_PWM_RR(ix > 0),
|
|
data->pwm_rr[ix > 0]);
|
|
}
|
|
break;
|
|
}
|
|
break;
|
|
case SYS_PWM_RAMP_RATE:
|
|
/* Only valid for pwm[1-3] */
|
|
/* Refresh the cache */
|
|
data->pwm_config[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_CONFIG(ix));
|
|
data->pwm_rr[ix > 0] = dme1737_read(data,
|
|
DME1737_REG_PWM_RR(ix > 0));
|
|
/* Set the ramp rate value */
|
|
if (val > 0) {
|
|
data->pwm_rr[ix > 0] = PWM_RR_TO_REG(val, ix,
|
|
data->pwm_rr[ix > 0]);
|
|
}
|
|
/* Enable/disable the feature only if the associated PWM
|
|
* output is in automatic mode. */
|
|
if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
|
|
data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(val > 0, ix,
|
|
data->pwm_rr[ix > 0]);
|
|
}
|
|
dme1737_write(data, DME1737_REG_PWM_RR(ix > 0),
|
|
data->pwm_rr[ix > 0]);
|
|
break;
|
|
case SYS_PWM_AUTO_CHANNELS_ZONE:
|
|
/* Only valid for pwm[1-3] */
|
|
if (!(val == 1 || val == 2 || val == 4 ||
|
|
val == 6 || val == 7)) {
|
|
count = -EINVAL;
|
|
dev_warn(dev, "PWM auto channels zone %ld "
|
|
"not supported. Choose one of 1, 2, 4, 6, "
|
|
"or 7.\n", val);
|
|
goto exit;
|
|
}
|
|
/* Refresh the cache */
|
|
data->pwm_config[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_CONFIG(ix));
|
|
if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
|
|
/* PWM is already in auto mode so update the temp
|
|
* channel assignment */
|
|
data->pwm_config[ix] = PWM_ACZ_TO_REG(val,
|
|
data->pwm_config[ix]);
|
|
dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
|
|
data->pwm_config[ix]);
|
|
} else {
|
|
/* PWM is not in auto mode so we save the temp
|
|
* channel assignment for later use */
|
|
data->pwm_acz[ix] = val;
|
|
}
|
|
break;
|
|
case SYS_PWM_AUTO_PWM_MIN:
|
|
/* Only valid for pwm[1-3] */
|
|
/* Refresh the cache */
|
|
data->pwm_min[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_MIN(ix));
|
|
/* There are only 2 values supported for the auto_pwm_min
|
|
* value: 0 or auto_point1_pwm. So if the temperature drops
|
|
* below the auto_point1_temp_hyst value, the fan either turns
|
|
* off or runs at auto_point1_pwm duty-cycle. */
|
|
if (val > ((data->pwm_min[ix] + 1) / 2)) {
|
|
data->pwm_rr[0] = PWM_OFF_TO_REG(1, ix,
|
|
dme1737_read(data,
|
|
DME1737_REG_PWM_RR(0)));
|
|
} else {
|
|
data->pwm_rr[0] = PWM_OFF_TO_REG(0, ix,
|
|
dme1737_read(data,
|
|
DME1737_REG_PWM_RR(0)));
|
|
}
|
|
dme1737_write(data, DME1737_REG_PWM_RR(0),
|
|
data->pwm_rr[0]);
|
|
break;
|
|
case SYS_PWM_AUTO_POINT1_PWM:
|
|
/* Only valid for pwm[1-3] */
|
|
data->pwm_min[ix] = SENSORS_LIMIT(val, 0, 255);
|
|
dme1737_write(data, DME1737_REG_PWM_MIN(ix),
|
|
data->pwm_min[ix]);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown function %d.\n", fn);
|
|
}
|
|
exit:
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Miscellaneous sysfs attributes
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct dme1737_data *data = i2c_get_clientdata(client);
|
|
|
|
return sprintf(buf, "%d\n", data->vrm);
|
|
}
|
|
|
|
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
data->vrm = val;
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_vid(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct dme1737_data *data = dme1737_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
|
|
}
|
|
|
|
static ssize_t show_name(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%s\n", data->name);
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Sysfs device attribute defines and structs
|
|
* --------------------------------------------------------------------- */
|
|
|
|
/* Voltages 0-6 */
|
|
|
|
#define SENSOR_DEVICE_ATTR_IN(ix) \
|
|
static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
|
|
show_in, NULL, SYS_IN_INPUT, ix); \
|
|
static SENSOR_DEVICE_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \
|
|
show_in, set_in, SYS_IN_MIN, ix); \
|
|
static SENSOR_DEVICE_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \
|
|
show_in, set_in, SYS_IN_MAX, ix); \
|
|
static SENSOR_DEVICE_ATTR_2(in##ix##_alarm, S_IRUGO, \
|
|
show_in, NULL, SYS_IN_ALARM, ix)
|
|
|
|
SENSOR_DEVICE_ATTR_IN(0);
|
|
SENSOR_DEVICE_ATTR_IN(1);
|
|
SENSOR_DEVICE_ATTR_IN(2);
|
|
SENSOR_DEVICE_ATTR_IN(3);
|
|
SENSOR_DEVICE_ATTR_IN(4);
|
|
SENSOR_DEVICE_ATTR_IN(5);
|
|
SENSOR_DEVICE_ATTR_IN(6);
|
|
|
|
/* Temperatures 1-3 */
|
|
|
|
#define SENSOR_DEVICE_ATTR_TEMP(ix) \
|
|
static SENSOR_DEVICE_ATTR_2(temp##ix##_input, S_IRUGO, \
|
|
show_temp, NULL, SYS_TEMP_INPUT, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(temp##ix##_min, S_IRUGO | S_IWUSR, \
|
|
show_temp, set_temp, SYS_TEMP_MIN, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \
|
|
show_temp, set_temp, SYS_TEMP_MAX, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(temp##ix##_offset, S_IRUGO, \
|
|
show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(temp##ix##_alarm, S_IRUGO, \
|
|
show_temp, NULL, SYS_TEMP_ALARM, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(temp##ix##_fault, S_IRUGO, \
|
|
show_temp, NULL, SYS_TEMP_FAULT, ix-1)
|
|
|
|
SENSOR_DEVICE_ATTR_TEMP(1);
|
|
SENSOR_DEVICE_ATTR_TEMP(2);
|
|
SENSOR_DEVICE_ATTR_TEMP(3);
|
|
|
|
/* Zones 1-3 */
|
|
|
|
#define SENSOR_DEVICE_ATTR_ZONE(ix) \
|
|
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_channels_temp, S_IRUGO, \
|
|
show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp_hyst, S_IRUGO, \
|
|
show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp, S_IRUGO, \
|
|
show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point2_temp, S_IRUGO, \
|
|
show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point3_temp, S_IRUGO, \
|
|
show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1)
|
|
|
|
SENSOR_DEVICE_ATTR_ZONE(1);
|
|
SENSOR_DEVICE_ATTR_ZONE(2);
|
|
SENSOR_DEVICE_ATTR_ZONE(3);
|
|
|
|
/* Fans 1-4 */
|
|
|
|
#define SENSOR_DEVICE_ATTR_FAN_1TO4(ix) \
|
|
static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
|
|
show_fan, NULL, SYS_FAN_INPUT, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
|
|
show_fan, set_fan, SYS_FAN_MIN, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
|
|
show_fan, NULL, SYS_FAN_ALARM, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(fan##ix##_type, S_IRUGO | S_IWUSR, \
|
|
show_fan, set_fan, SYS_FAN_TYPE, ix-1)
|
|
|
|
SENSOR_DEVICE_ATTR_FAN_1TO4(1);
|
|
SENSOR_DEVICE_ATTR_FAN_1TO4(2);
|
|
SENSOR_DEVICE_ATTR_FAN_1TO4(3);
|
|
SENSOR_DEVICE_ATTR_FAN_1TO4(4);
|
|
|
|
/* Fans 5-6 */
|
|
|
|
#define SENSOR_DEVICE_ATTR_FAN_5TO6(ix) \
|
|
static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
|
|
show_fan, NULL, SYS_FAN_INPUT, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
|
|
show_fan, set_fan, SYS_FAN_MIN, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
|
|
show_fan, NULL, SYS_FAN_ALARM, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(fan##ix##_max, S_IRUGO | S_IWUSR, \
|
|
show_fan, set_fan, SYS_FAN_MAX, ix-1)
|
|
|
|
SENSOR_DEVICE_ATTR_FAN_5TO6(5);
|
|
SENSOR_DEVICE_ATTR_FAN_5TO6(6);
|
|
|
|
/* PWMs 1-3 */
|
|
|
|
#define SENSOR_DEVICE_ATTR_PWM_1TO3(ix) \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_ramp_rate, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_channels_zone, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_pwm_min, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point1_pwm, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point2_pwm, S_IRUGO, \
|
|
show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1)
|
|
|
|
SENSOR_DEVICE_ATTR_PWM_1TO3(1);
|
|
SENSOR_DEVICE_ATTR_PWM_1TO3(2);
|
|
SENSOR_DEVICE_ATTR_PWM_1TO3(3);
|
|
|
|
/* PWMs 5-6 */
|
|
|
|
#define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
|
|
show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
|
|
static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
|
|
show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
|
|
|
|
SENSOR_DEVICE_ATTR_PWM_5TO6(5);
|
|
SENSOR_DEVICE_ATTR_PWM_5TO6(6);
|
|
|
|
/* Misc */
|
|
|
|
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
|
|
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
|
|
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); /* for ISA devices */
|
|
|
|
/* This struct holds all the attributes that are always present and need to be
|
|
* created unconditionally. The attributes that need modification of their
|
|
* permissions are created read-only and write permissions are added or removed
|
|
* on the fly when required */
|
|
static struct attribute *dme1737_attr[] ={
|
|
/* Voltages */
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in0_min.dev_attr.attr,
|
|
&sensor_dev_attr_in0_max.dev_attr.attr,
|
|
&sensor_dev_attr_in0_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max.dev_attr.attr,
|
|
&sensor_dev_attr_in1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_min.dev_attr.attr,
|
|
&sensor_dev_attr_in2_max.dev_attr.attr,
|
|
&sensor_dev_attr_in2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_min.dev_attr.attr,
|
|
&sensor_dev_attr_in3_max.dev_attr.attr,
|
|
&sensor_dev_attr_in3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in4_min.dev_attr.attr,
|
|
&sensor_dev_attr_in4_max.dev_attr.attr,
|
|
&sensor_dev_attr_in4_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in5_input.dev_attr.attr,
|
|
&sensor_dev_attr_in5_min.dev_attr.attr,
|
|
&sensor_dev_attr_in5_max.dev_attr.attr,
|
|
&sensor_dev_attr_in5_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in6_input.dev_attr.attr,
|
|
&sensor_dev_attr_in6_min.dev_attr.attr,
|
|
&sensor_dev_attr_in6_max.dev_attr.attr,
|
|
&sensor_dev_attr_in6_alarm.dev_attr.attr,
|
|
/* Temperatures */
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_fault.dev_attr.attr,
|
|
/* Zones */
|
|
&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dme1737_group = {
|
|
.attrs = dme1737_attr,
|
|
};
|
|
|
|
/* The following struct holds misc attributes, which are not available in all
|
|
* chips. Their creation depends on the chip type which is determined during
|
|
* module load. */
|
|
static struct attribute *dme1737_misc_attr[] = {
|
|
/* Temperatures */
|
|
&sensor_dev_attr_temp1_offset.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_offset.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_offset.dev_attr.attr,
|
|
/* Zones */
|
|
&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
|
|
/* Misc */
|
|
&dev_attr_vrm.attr,
|
|
&dev_attr_cpu0_vid.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dme1737_misc_group = {
|
|
.attrs = dme1737_misc_attr,
|
|
};
|
|
|
|
/* The following structs hold the PWM attributes, some of which are optional.
|
|
* Their creation depends on the chip configuration which is determined during
|
|
* module load. */
|
|
static struct attribute *dme1737_pwm1_attr[] = {
|
|
&sensor_dev_attr_pwm1.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_pwm2_attr[] = {
|
|
&sensor_dev_attr_pwm2.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_pwm3_attr[] = {
|
|
&sensor_dev_attr_pwm3.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_pwm5_attr[] = {
|
|
&sensor_dev_attr_pwm5.dev_attr.attr,
|
|
&sensor_dev_attr_pwm5_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm5_enable.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_pwm6_attr[] = {
|
|
&sensor_dev_attr_pwm6.dev_attr.attr,
|
|
&sensor_dev_attr_pwm6_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm6_enable.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dme1737_pwm_group[] = {
|
|
{ .attrs = dme1737_pwm1_attr },
|
|
{ .attrs = dme1737_pwm2_attr },
|
|
{ .attrs = dme1737_pwm3_attr },
|
|
{ .attrs = NULL },
|
|
{ .attrs = dme1737_pwm5_attr },
|
|
{ .attrs = dme1737_pwm6_attr },
|
|
};
|
|
|
|
/* The following struct holds misc PWM attributes, which are not available in
|
|
* all chips. Their creation depends on the chip type which is determined
|
|
* during module load. */
|
|
static struct attribute *dme1737_pwm_misc_attr[] = {
|
|
&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
|
|
};
|
|
|
|
/* The following structs hold the fan attributes, some of which are optional.
|
|
* Their creation depends on the chip configuration which is determined during
|
|
* module load. */
|
|
static struct attribute *dme1737_fan1_attr[] = {
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_type.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_fan2_attr[] = {
|
|
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_type.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_fan3_attr[] = {
|
|
&sensor_dev_attr_fan3_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_type.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_fan4_attr[] = {
|
|
&sensor_dev_attr_fan4_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan4_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan4_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan4_type.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_fan5_attr[] = {
|
|
&sensor_dev_attr_fan5_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan5_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan5_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan5_max.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_fan6_attr[] = {
|
|
&sensor_dev_attr_fan6_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan6_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan6_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan6_max.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dme1737_fan_group[] = {
|
|
{ .attrs = dme1737_fan1_attr },
|
|
{ .attrs = dme1737_fan2_attr },
|
|
{ .attrs = dme1737_fan3_attr },
|
|
{ .attrs = dme1737_fan4_attr },
|
|
{ .attrs = dme1737_fan5_attr },
|
|
{ .attrs = dme1737_fan6_attr },
|
|
};
|
|
|
|
/* The permissions of the following zone attributes are changed to read-
|
|
* writeable if the chip is *not* locked. Otherwise they stay read-only. */
|
|
static struct attribute *dme1737_zone_chmod_attr[] = {
|
|
&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dme1737_zone_chmod_group = {
|
|
.attrs = dme1737_zone_chmod_attr,
|
|
};
|
|
|
|
/* The permissions of the following PWM attributes are changed to read-
|
|
* writeable if the chip is *not* locked and the respective PWM is available.
|
|
* Otherwise they stay read-only. */
|
|
static struct attribute *dme1737_pwm1_chmod_attr[] = {
|
|
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_pwm2_chmod_attr[] = {
|
|
&sensor_dev_attr_pwm2_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_pwm3_chmod_attr[] = {
|
|
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_pwm5_chmod_attr[] = {
|
|
&sensor_dev_attr_pwm5.dev_attr.attr,
|
|
&sensor_dev_attr_pwm5_freq.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static struct attribute *dme1737_pwm6_chmod_attr[] = {
|
|
&sensor_dev_attr_pwm6.dev_attr.attr,
|
|
&sensor_dev_attr_pwm6_freq.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dme1737_pwm_chmod_group[] = {
|
|
{ .attrs = dme1737_pwm1_chmod_attr },
|
|
{ .attrs = dme1737_pwm2_chmod_attr },
|
|
{ .attrs = dme1737_pwm3_chmod_attr },
|
|
{ .attrs = NULL },
|
|
{ .attrs = dme1737_pwm5_chmod_attr },
|
|
{ .attrs = dme1737_pwm6_chmod_attr },
|
|
};
|
|
|
|
/* Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the
|
|
* chip is not locked. Otherwise they are read-only. */
|
|
static struct attribute *dme1737_pwm_chmod_attr[] = {
|
|
&sensor_dev_attr_pwm1.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3.dev_attr.attr,
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Super-IO functions
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static inline void dme1737_sio_enter(int sio_cip)
|
|
{
|
|
outb(0x55, sio_cip);
|
|
}
|
|
|
|
static inline void dme1737_sio_exit(int sio_cip)
|
|
{
|
|
outb(0xaa, sio_cip);
|
|
}
|
|
|
|
static inline int dme1737_sio_inb(int sio_cip, int reg)
|
|
{
|
|
outb(reg, sio_cip);
|
|
return inb(sio_cip + 1);
|
|
}
|
|
|
|
static inline void dme1737_sio_outb(int sio_cip, int reg, int val)
|
|
{
|
|
outb(reg, sio_cip);
|
|
outb(val, sio_cip + 1);
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Device initialization
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static int dme1737_i2c_get_features(int, struct dme1737_data*);
|
|
|
|
static void dme1737_chmod_file(struct device *dev,
|
|
struct attribute *attr, mode_t mode)
|
|
{
|
|
if (sysfs_chmod_file(&dev->kobj, attr, mode)) {
|
|
dev_warn(dev, "Failed to change permissions of %s.\n",
|
|
attr->name);
|
|
}
|
|
}
|
|
|
|
static void dme1737_chmod_group(struct device *dev,
|
|
const struct attribute_group *group,
|
|
mode_t mode)
|
|
{
|
|
struct attribute **attr;
|
|
|
|
for (attr = group->attrs; *attr; attr++) {
|
|
dme1737_chmod_file(dev, *attr, mode);
|
|
}
|
|
}
|
|
|
|
static void dme1737_remove_files(struct device *dev)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
int ix;
|
|
|
|
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
|
|
if (data->has_fan & (1 << ix)) {
|
|
sysfs_remove_group(&dev->kobj,
|
|
&dme1737_fan_group[ix]);
|
|
}
|
|
}
|
|
|
|
for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
|
|
if (data->has_pwm & (1 << ix)) {
|
|
sysfs_remove_group(&dev->kobj,
|
|
&dme1737_pwm_group[ix]);
|
|
if (data->type != sch5027 && ix < 3) {
|
|
sysfs_remove_file(&dev->kobj,
|
|
dme1737_pwm_misc_attr[ix]);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (data->type != sch5027) {
|
|
sysfs_remove_group(&dev->kobj, &dme1737_misc_group);
|
|
}
|
|
|
|
sysfs_remove_group(&dev->kobj, &dme1737_group);
|
|
|
|
if (!data->client) {
|
|
sysfs_remove_file(&dev->kobj, &dev_attr_name.attr);
|
|
}
|
|
}
|
|
|
|
static int dme1737_create_files(struct device *dev)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
int err, ix;
|
|
|
|
/* Create a name attribute for ISA devices */
|
|
if (!data->client &&
|
|
(err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr))) {
|
|
goto exit;
|
|
}
|
|
|
|
/* Create standard sysfs attributes */
|
|
if ((err = sysfs_create_group(&dev->kobj, &dme1737_group))) {
|
|
goto exit_remove;
|
|
}
|
|
|
|
/* Create misc sysfs attributes */
|
|
if ((data->type != sch5027) &&
|
|
(err = sysfs_create_group(&dev->kobj,
|
|
&dme1737_misc_group))) {
|
|
goto exit_remove;
|
|
}
|
|
|
|
/* Create fan sysfs attributes */
|
|
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
|
|
if (data->has_fan & (1 << ix)) {
|
|
if ((err = sysfs_create_group(&dev->kobj,
|
|
&dme1737_fan_group[ix]))) {
|
|
goto exit_remove;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Create PWM sysfs attributes */
|
|
for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
|
|
if (data->has_pwm & (1 << ix)) {
|
|
if ((err = sysfs_create_group(&dev->kobj,
|
|
&dme1737_pwm_group[ix]))) {
|
|
goto exit_remove;
|
|
}
|
|
if (data->type != sch5027 && ix < 3 &&
|
|
(err = sysfs_create_file(&dev->kobj,
|
|
dme1737_pwm_misc_attr[ix]))) {
|
|
goto exit_remove;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Inform if the device is locked. Otherwise change the permissions of
|
|
* selected attributes from read-only to read-writeable. */
|
|
if (data->config & 0x02) {
|
|
dev_info(dev, "Device is locked. Some attributes "
|
|
"will be read-only.\n");
|
|
} else {
|
|
/* Change permissions of zone sysfs attributes */
|
|
dme1737_chmod_group(dev, &dme1737_zone_chmod_group,
|
|
S_IRUGO | S_IWUSR);
|
|
|
|
/* Change permissions of misc sysfs attributes */
|
|
if (data->type != sch5027) {
|
|
dme1737_chmod_group(dev, &dme1737_misc_group,
|
|
S_IRUGO | S_IWUSR);
|
|
}
|
|
|
|
/* Change permissions of PWM sysfs attributes */
|
|
for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) {
|
|
if (data->has_pwm & (1 << ix)) {
|
|
dme1737_chmod_group(dev,
|
|
&dme1737_pwm_chmod_group[ix],
|
|
S_IRUGO | S_IWUSR);
|
|
if (data->type != sch5027 && ix < 3) {
|
|
dme1737_chmod_file(dev,
|
|
dme1737_pwm_misc_attr[ix],
|
|
S_IRUGO | S_IWUSR);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Change permissions of pwm[1-3] if in manual mode */
|
|
for (ix = 0; ix < 3; ix++) {
|
|
if ((data->has_pwm & (1 << ix)) &&
|
|
(PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
|
|
dme1737_chmod_file(dev,
|
|
dme1737_pwm_chmod_attr[ix],
|
|
S_IRUGO | S_IWUSR);
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove:
|
|
dme1737_remove_files(dev);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int dme1737_init_device(struct device *dev)
|
|
{
|
|
struct dme1737_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int ix;
|
|
u8 reg;
|
|
|
|
/* Point to the right nominal voltages array */
|
|
data->in_nominal = IN_NOMINAL(data->type);
|
|
|
|
data->config = dme1737_read(data, DME1737_REG_CONFIG);
|
|
/* Inform if part is not monitoring/started */
|
|
if (!(data->config & 0x01)) {
|
|
if (!force_start) {
|
|
dev_err(dev, "Device is not monitoring. "
|
|
"Use the force_start load parameter to "
|
|
"override.\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* Force monitoring */
|
|
data->config |= 0x01;
|
|
dme1737_write(data, DME1737_REG_CONFIG, data->config);
|
|
}
|
|
/* Inform if part is not ready */
|
|
if (!(data->config & 0x04)) {
|
|
dev_err(dev, "Device is not ready.\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* Determine which optional fan and pwm features are enabled/present */
|
|
if (client) { /* I2C chip */
|
|
data->config2 = dme1737_read(data, DME1737_REG_CONFIG2);
|
|
/* Check if optional fan3 input is enabled */
|
|
if (data->config2 & 0x04) {
|
|
data->has_fan |= (1 << 2);
|
|
}
|
|
|
|
/* Fan4 and pwm3 are only available if the client's I2C address
|
|
* is the default 0x2e. Otherwise the I/Os associated with
|
|
* these functions are used for addr enable/select. */
|
|
if (client->addr == 0x2e) {
|
|
data->has_fan |= (1 << 3);
|
|
data->has_pwm |= (1 << 2);
|
|
}
|
|
|
|
/* Determine which of the optional fan[5-6] and pwm[5-6]
|
|
* features are enabled. For this, we need to query the runtime
|
|
* registers through the Super-IO LPC interface. Try both
|
|
* config ports 0x2e and 0x4e. */
|
|
if (dme1737_i2c_get_features(0x2e, data) &&
|
|
dme1737_i2c_get_features(0x4e, data)) {
|
|
dev_warn(dev, "Failed to query Super-IO for optional "
|
|
"features.\n");
|
|
}
|
|
} else { /* ISA chip */
|
|
/* Fan3 and pwm3 are always available. Fan[4-5] and pwm[5-6]
|
|
* don't exist in the ISA chip. */
|
|
data->has_fan |= (1 << 2);
|
|
data->has_pwm |= (1 << 2);
|
|
}
|
|
|
|
/* Fan1, fan2, pwm1, and pwm2 are always present */
|
|
data->has_fan |= 0x03;
|
|
data->has_pwm |= 0x03;
|
|
|
|
dev_info(dev, "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, "
|
|
"fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
|
|
(data->has_pwm & (1 << 2)) ? "yes" : "no",
|
|
(data->has_pwm & (1 << 4)) ? "yes" : "no",
|
|
(data->has_pwm & (1 << 5)) ? "yes" : "no",
|
|
(data->has_fan & (1 << 2)) ? "yes" : "no",
|
|
(data->has_fan & (1 << 3)) ? "yes" : "no",
|
|
(data->has_fan & (1 << 4)) ? "yes" : "no",
|
|
(data->has_fan & (1 << 5)) ? "yes" : "no");
|
|
|
|
reg = dme1737_read(data, DME1737_REG_TACH_PWM);
|
|
/* Inform if fan-to-pwm mapping differs from the default */
|
|
if (client && reg != 0xa4) { /* I2C chip */
|
|
dev_warn(dev, "Non-standard fan to pwm mapping: "
|
|
"fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, "
|
|
"fan4->pwm%d. Please report to the driver "
|
|
"maintainer.\n",
|
|
(reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
|
|
((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1);
|
|
} else if (!client && reg != 0x24) { /* ISA chip */
|
|
dev_warn(dev, "Non-standard fan to pwm mapping: "
|
|
"fan1->pwm%d, fan2->pwm%d, fan3->pwm%d. "
|
|
"Please report to the driver maintainer.\n",
|
|
(reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
|
|
((reg >> 4) & 0x03) + 1);
|
|
}
|
|
|
|
/* Switch pwm[1-3] to manual mode if they are currently disabled and
|
|
* set the duty-cycles to 0% (which is identical to the PWMs being
|
|
* disabled). */
|
|
if (!(data->config & 0x02)) {
|
|
for (ix = 0; ix < 3; ix++) {
|
|
data->pwm_config[ix] = dme1737_read(data,
|
|
DME1737_REG_PWM_CONFIG(ix));
|
|
if ((data->has_pwm & (1 << ix)) &&
|
|
(PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) {
|
|
dev_info(dev, "Switching pwm%d to "
|
|
"manual mode.\n", ix + 1);
|
|
data->pwm_config[ix] = PWM_EN_TO_REG(1,
|
|
data->pwm_config[ix]);
|
|
dme1737_write(data, DME1737_REG_PWM(ix), 0);
|
|
dme1737_write(data,
|
|
DME1737_REG_PWM_CONFIG(ix),
|
|
data->pwm_config[ix]);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Initialize the default PWM auto channels zone (acz) assignments */
|
|
data->pwm_acz[0] = 1; /* pwm1 -> zone1 */
|
|
data->pwm_acz[1] = 2; /* pwm2 -> zone2 */
|
|
data->pwm_acz[2] = 4; /* pwm3 -> zone3 */
|
|
|
|
/* Set VRM */
|
|
if (data->type != sch5027) {
|
|
data->vrm = vid_which_vrm();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* I2C device detection and registration
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static struct i2c_driver dme1737_i2c_driver;
|
|
|
|
static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
|
|
{
|
|
int err = 0, reg;
|
|
u16 addr;
|
|
|
|
dme1737_sio_enter(sio_cip);
|
|
|
|
/* Check device ID
|
|
* The DME1737 can return either 0x78 or 0x77 as its device ID.
|
|
* The SCH5027 returns 0x89 as its device ID. */
|
|
reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
|
|
if (!(reg == 0x77 || reg == 0x78 || reg == 0x89)) {
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
/* Select logical device A (runtime registers) */
|
|
dme1737_sio_outb(sio_cip, 0x07, 0x0a);
|
|
|
|
/* Get the base address of the runtime registers */
|
|
if (!(addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
|
|
dme1737_sio_inb(sio_cip, 0x61))) {
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
/* Read the runtime registers to determine which optional features
|
|
* are enabled and available. Bits [3:2] of registers 0x43-0x46 are set
|
|
* to '10' if the respective feature is enabled. */
|
|
if ((inb(addr + 0x43) & 0x0c) == 0x08) { /* fan6 */
|
|
data->has_fan |= (1 << 5);
|
|
}
|
|
if ((inb(addr + 0x44) & 0x0c) == 0x08) { /* pwm6 */
|
|
data->has_pwm |= (1 << 5);
|
|
}
|
|
if ((inb(addr + 0x45) & 0x0c) == 0x08) { /* fan5 */
|
|
data->has_fan |= (1 << 4);
|
|
}
|
|
if ((inb(addr + 0x46) & 0x0c) == 0x08) { /* pwm5 */
|
|
data->has_pwm |= (1 << 4);
|
|
}
|
|
|
|
exit:
|
|
dme1737_sio_exit(sio_cip);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int dme1737_i2c_detect(struct i2c_client *client, int kind,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
struct device *dev = &adapter->dev;
|
|
u8 company, verstep = 0;
|
|
const char *name;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* A negative kind means that the driver was loaded with no force
|
|
* parameter (default), so we must identify the chip. */
|
|
if (kind < 0) {
|
|
company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
|
|
verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
|
|
|
|
if (company == DME1737_COMPANY_SMSC &&
|
|
(verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
|
|
kind = dme1737;
|
|
} else if (company == DME1737_COMPANY_SMSC &&
|
|
verstep == SCH5027_VERSTEP) {
|
|
kind = sch5027;
|
|
} else {
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (kind == sch5027) {
|
|
name = "sch5027";
|
|
} else {
|
|
kind = dme1737;
|
|
name = "dme1737";
|
|
}
|
|
|
|
dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n",
|
|
kind == sch5027 ? "SCH5027" : "DME1737", client->addr,
|
|
verstep);
|
|
strlcpy(info->type, name, I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dme1737_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct dme1737_data *data;
|
|
struct device *dev = &client->dev;
|
|
int err;
|
|
|
|
data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL);
|
|
if (!data) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
i2c_set_clientdata(client, data);
|
|
data->type = id->driver_data;
|
|
data->client = client;
|
|
data->name = client->name;
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Initialize the DME1737 chip */
|
|
if ((err = dme1737_init_device(dev))) {
|
|
dev_err(dev, "Failed to initialize device.\n");
|
|
goto exit_kfree;
|
|
}
|
|
|
|
/* Create sysfs files */
|
|
if ((err = dme1737_create_files(dev))) {
|
|
dev_err(dev, "Failed to create sysfs files.\n");
|
|
goto exit_kfree;
|
|
}
|
|
|
|
/* Register device */
|
|
data->hwmon_dev = hwmon_device_register(dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
dev_err(dev, "Failed to register device.\n");
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove:
|
|
dme1737_remove_files(dev);
|
|
exit_kfree:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int dme1737_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct dme1737_data *data = i2c_get_clientdata(client);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
dme1737_remove_files(&client->dev);
|
|
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id dme1737_id[] = {
|
|
{ "dme1737", dme1737 },
|
|
{ "sch5027", sch5027 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, dme1737_id);
|
|
|
|
static struct i2c_driver dme1737_i2c_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "dme1737",
|
|
},
|
|
.probe = dme1737_i2c_probe,
|
|
.remove = dme1737_i2c_remove,
|
|
.id_table = dme1737_id,
|
|
.detect = dme1737_i2c_detect,
|
|
.address_data = &addr_data,
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* ISA device detection and registration
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr)
|
|
{
|
|
int err = 0, reg;
|
|
unsigned short base_addr;
|
|
|
|
dme1737_sio_enter(sio_cip);
|
|
|
|
/* Check device ID
|
|
* We currently know about SCH3112 (0x7c), SCH3114 (0x7d), and
|
|
* SCH3116 (0x7f). */
|
|
reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
|
|
if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) {
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
/* Select logical device A (runtime registers) */
|
|
dme1737_sio_outb(sio_cip, 0x07, 0x0a);
|
|
|
|
/* Get the base address of the runtime registers */
|
|
if (!(base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
|
|
dme1737_sio_inb(sio_cip, 0x61))) {
|
|
printk(KERN_ERR "dme1737: Base address not set.\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
/* Access to the hwmon registers is through an index/data register
|
|
* pair located at offset 0x70/0x71. */
|
|
*addr = base_addr + 0x70;
|
|
|
|
exit:
|
|
dme1737_sio_exit(sio_cip);
|
|
return err;
|
|
}
|
|
|
|
static int __init dme1737_isa_device_add(unsigned short addr)
|
|
{
|
|
struct resource res = {
|
|
.start = addr,
|
|
.end = addr + DME1737_EXTENT - 1,
|
|
.name = "dme1737",
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
int err;
|
|
|
|
if (!(pdev = platform_device_alloc("dme1737", addr))) {
|
|
printk(KERN_ERR "dme1737: Failed to allocate device.\n");
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
if ((err = platform_device_add_resources(pdev, &res, 1))) {
|
|
printk(KERN_ERR "dme1737: Failed to add device resource "
|
|
"(err = %d).\n", err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
if ((err = platform_device_add(pdev))) {
|
|
printk(KERN_ERR "dme1737: Failed to add device (err = %d).\n",
|
|
err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_device_put:
|
|
platform_device_put(pdev);
|
|
pdev = NULL;
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int __devinit dme1737_isa_probe(struct platform_device *pdev)
|
|
{
|
|
u8 company, device;
|
|
struct resource *res;
|
|
struct dme1737_data *data;
|
|
struct device *dev = &pdev->dev;
|
|
int err;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!request_region(res->start, DME1737_EXTENT, "dme1737")) {
|
|
dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
|
|
(unsigned short)res->start,
|
|
(unsigned short)res->start + DME1737_EXTENT - 1);
|
|
err = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
if (!(data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
goto exit_release_region;
|
|
}
|
|
|
|
data->addr = res->start;
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
/* Skip chip detection if module is loaded with force_id parameter */
|
|
if (!force_id) {
|
|
company = dme1737_read(data, DME1737_REG_COMPANY);
|
|
device = dme1737_read(data, DME1737_REG_DEVICE);
|
|
|
|
if (!((company == DME1737_COMPANY_SMSC) &&
|
|
(device == SCH311X_DEVICE))) {
|
|
err = -ENODEV;
|
|
goto exit_kfree;
|
|
}
|
|
}
|
|
data->type = sch311x;
|
|
|
|
/* Fill in the remaining client fields and initialize the mutex */
|
|
data->name = "sch311x";
|
|
mutex_init(&data->update_lock);
|
|
|
|
dev_info(dev, "Found a SCH311x chip at 0x%04x\n", data->addr);
|
|
|
|
/* Initialize the chip */
|
|
if ((err = dme1737_init_device(dev))) {
|
|
dev_err(dev, "Failed to initialize device.\n");
|
|
goto exit_kfree;
|
|
}
|
|
|
|
/* Create sysfs files */
|
|
if ((err = dme1737_create_files(dev))) {
|
|
dev_err(dev, "Failed to create sysfs files.\n");
|
|
goto exit_kfree;
|
|
}
|
|
|
|
/* Register device */
|
|
data->hwmon_dev = hwmon_device_register(dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
dev_err(dev, "Failed to register device.\n");
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove_files;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove_files:
|
|
dme1737_remove_files(dev);
|
|
exit_kfree:
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(data);
|
|
exit_release_region:
|
|
release_region(res->start, DME1737_EXTENT);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int __devexit dme1737_isa_remove(struct platform_device *pdev)
|
|
{
|
|
struct dme1737_data *data = platform_get_drvdata(pdev);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
dme1737_remove_files(&pdev->dev);
|
|
release_region(data->addr, DME1737_EXTENT);
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver dme1737_isa_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "dme1737",
|
|
},
|
|
.probe = dme1737_isa_probe,
|
|
.remove = __devexit_p(dme1737_isa_remove),
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Module initialization and cleanup
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static int __init dme1737_init(void)
|
|
{
|
|
int err;
|
|
unsigned short addr;
|
|
|
|
if ((err = i2c_add_driver(&dme1737_i2c_driver))) {
|
|
goto exit;
|
|
}
|
|
|
|
if (dme1737_isa_detect(0x2e, &addr) &&
|
|
dme1737_isa_detect(0x4e, &addr) &&
|
|
(!probe_all_addr ||
|
|
(dme1737_isa_detect(0x162e, &addr) &&
|
|
dme1737_isa_detect(0x164e, &addr)))) {
|
|
/* Return 0 if we didn't find an ISA device */
|
|
return 0;
|
|
}
|
|
|
|
if ((err = platform_driver_register(&dme1737_isa_driver))) {
|
|
goto exit_del_i2c_driver;
|
|
}
|
|
|
|
/* Sets global pdev as a side effect */
|
|
if ((err = dme1737_isa_device_add(addr))) {
|
|
goto exit_del_isa_driver;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_del_isa_driver:
|
|
platform_driver_unregister(&dme1737_isa_driver);
|
|
exit_del_i2c_driver:
|
|
i2c_del_driver(&dme1737_i2c_driver);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static void __exit dme1737_exit(void)
|
|
{
|
|
if (pdev) {
|
|
platform_device_unregister(pdev);
|
|
platform_driver_unregister(&dme1737_isa_driver);
|
|
}
|
|
|
|
i2c_del_driver(&dme1737_i2c_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>");
|
|
MODULE_DESCRIPTION("DME1737 sensors");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(dme1737_init);
|
|
module_exit(dme1737_exit);
|