mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 23:26:45 +07:00
170680abd1
The driver depends on the chip.of_node being present to compile, which is the case on some target platforms but not others. Instead, rely on chip.dev->of_node to be used, as struct device always has an of_node in place. Cc: Alexander Stein <alexander.stein@systec-electronic.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1080 lines
25 KiB
C
1080 lines
25 KiB
C
/*
|
|
* MCP23S08 SPI/I2C GPIO gpio expander driver
|
|
*
|
|
* The inputs and outputs of the mcp23s08, mcp23s17, mcp23008 and mcp23017 are
|
|
* supported.
|
|
* For the I2C versions of the chips (mcp23008 and mcp23017) generation of
|
|
* interrupts is also supported.
|
|
* The hardware of the SPI versions of the chips (mcp23s08 and mcp23s17) is
|
|
* also capable of generating interrupts, but the linux driver does not
|
|
* support that yet.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/mcp23s08.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_device.h>
|
|
|
|
/**
|
|
* MCP types supported by driver
|
|
*/
|
|
#define MCP_TYPE_S08 0
|
|
#define MCP_TYPE_S17 1
|
|
#define MCP_TYPE_008 2
|
|
#define MCP_TYPE_017 3
|
|
|
|
/* Registers are all 8 bits wide.
|
|
*
|
|
* The mcp23s17 has twice as many bits, and can be configured to work
|
|
* with either 16 bit registers or with two adjacent 8 bit banks.
|
|
*/
|
|
#define MCP_IODIR 0x00 /* init/reset: all ones */
|
|
#define MCP_IPOL 0x01
|
|
#define MCP_GPINTEN 0x02
|
|
#define MCP_DEFVAL 0x03
|
|
#define MCP_INTCON 0x04
|
|
#define MCP_IOCON 0x05
|
|
# define IOCON_MIRROR (1 << 6)
|
|
# define IOCON_SEQOP (1 << 5)
|
|
# define IOCON_HAEN (1 << 3)
|
|
# define IOCON_ODR (1 << 2)
|
|
# define IOCON_INTPOL (1 << 1)
|
|
#define MCP_GPPU 0x06
|
|
#define MCP_INTF 0x07
|
|
#define MCP_INTCAP 0x08
|
|
#define MCP_GPIO 0x09
|
|
#define MCP_OLAT 0x0a
|
|
|
|
struct mcp23s08;
|
|
|
|
struct mcp23s08_ops {
|
|
int (*read)(struct mcp23s08 *mcp, unsigned reg);
|
|
int (*write)(struct mcp23s08 *mcp, unsigned reg, unsigned val);
|
|
int (*read_regs)(struct mcp23s08 *mcp, unsigned reg,
|
|
u16 *vals, unsigned n);
|
|
};
|
|
|
|
struct mcp23s08 {
|
|
u8 addr;
|
|
bool irq_active_high;
|
|
|
|
u16 cache[11];
|
|
u16 irq_rise;
|
|
u16 irq_fall;
|
|
int irq;
|
|
bool irq_controller;
|
|
/* lock protects the cached values */
|
|
struct mutex lock;
|
|
struct mutex irq_lock;
|
|
struct irq_domain *irq_domain;
|
|
|
|
struct gpio_chip chip;
|
|
|
|
const struct mcp23s08_ops *ops;
|
|
void *data; /* ops specific data */
|
|
};
|
|
|
|
/* A given spi_device can represent up to eight mcp23sxx chips
|
|
* sharing the same chipselect but using different addresses
|
|
* (e.g. chips #0 and #3 might be populated, but not #1 or $2).
|
|
* Driver data holds all the per-chip data.
|
|
*/
|
|
struct mcp23s08_driver_data {
|
|
unsigned ngpio;
|
|
struct mcp23s08 *mcp[8];
|
|
struct mcp23s08 chip[];
|
|
};
|
|
|
|
/* This lock class tells lockdep that GPIO irqs are in a different
|
|
* category than their parents, so it won't report false recursion.
|
|
*/
|
|
static struct lock_class_key gpio_lock_class;
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg)
|
|
{
|
|
return i2c_smbus_read_byte_data(mcp->data, reg);
|
|
}
|
|
|
|
static int mcp23008_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
|
{
|
|
return i2c_smbus_write_byte_data(mcp->data, reg, val);
|
|
}
|
|
|
|
static int
|
|
mcp23008_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
|
{
|
|
while (n--) {
|
|
int ret = mcp23008_read(mcp, reg++);
|
|
if (ret < 0)
|
|
return ret;
|
|
*vals++ = ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcp23017_read(struct mcp23s08 *mcp, unsigned reg)
|
|
{
|
|
return i2c_smbus_read_word_data(mcp->data, reg << 1);
|
|
}
|
|
|
|
static int mcp23017_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
|
{
|
|
return i2c_smbus_write_word_data(mcp->data, reg << 1, val);
|
|
}
|
|
|
|
static int
|
|
mcp23017_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
|
{
|
|
while (n--) {
|
|
int ret = mcp23017_read(mcp, reg++);
|
|
if (ret < 0)
|
|
return ret;
|
|
*vals++ = ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mcp23s08_ops mcp23008_ops = {
|
|
.read = mcp23008_read,
|
|
.write = mcp23008_write,
|
|
.read_regs = mcp23008_read_regs,
|
|
};
|
|
|
|
static const struct mcp23s08_ops mcp23017_ops = {
|
|
.read = mcp23017_read,
|
|
.write = mcp23017_write,
|
|
.read_regs = mcp23017_read_regs,
|
|
};
|
|
|
|
#endif /* CONFIG_I2C */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_SPI_MASTER
|
|
|
|
static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
|
|
{
|
|
u8 tx[2], rx[1];
|
|
int status;
|
|
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = reg;
|
|
status = spi_write_then_read(mcp->data, tx, sizeof(tx), rx, sizeof(rx));
|
|
return (status < 0) ? status : rx[0];
|
|
}
|
|
|
|
static int mcp23s08_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
|
{
|
|
u8 tx[3];
|
|
|
|
tx[0] = mcp->addr;
|
|
tx[1] = reg;
|
|
tx[2] = val;
|
|
return spi_write_then_read(mcp->data, tx, sizeof(tx), NULL, 0);
|
|
}
|
|
|
|
static int
|
|
mcp23s08_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
|
{
|
|
u8 tx[2], *tmp;
|
|
int status;
|
|
|
|
if ((n + reg) > sizeof(mcp->cache))
|
|
return -EINVAL;
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = reg;
|
|
|
|
tmp = (u8 *)vals;
|
|
status = spi_write_then_read(mcp->data, tx, sizeof(tx), tmp, n);
|
|
if (status >= 0) {
|
|
while (n--)
|
|
vals[n] = tmp[n]; /* expand to 16bit */
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int mcp23s17_read(struct mcp23s08 *mcp, unsigned reg)
|
|
{
|
|
u8 tx[2], rx[2];
|
|
int status;
|
|
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = reg << 1;
|
|
status = spi_write_then_read(mcp->data, tx, sizeof(tx), rx, sizeof(rx));
|
|
return (status < 0) ? status : (rx[0] | (rx[1] << 8));
|
|
}
|
|
|
|
static int mcp23s17_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
|
{
|
|
u8 tx[4];
|
|
|
|
tx[0] = mcp->addr;
|
|
tx[1] = reg << 1;
|
|
tx[2] = val;
|
|
tx[3] = val >> 8;
|
|
return spi_write_then_read(mcp->data, tx, sizeof(tx), NULL, 0);
|
|
}
|
|
|
|
static int
|
|
mcp23s17_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
|
{
|
|
u8 tx[2];
|
|
int status;
|
|
|
|
if ((n + reg) > sizeof(mcp->cache))
|
|
return -EINVAL;
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = reg << 1;
|
|
|
|
status = spi_write_then_read(mcp->data, tx, sizeof(tx),
|
|
(u8 *)vals, n * 2);
|
|
if (status >= 0) {
|
|
while (n--)
|
|
vals[n] = __le16_to_cpu((__le16)vals[n]);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static const struct mcp23s08_ops mcp23s08_ops = {
|
|
.read = mcp23s08_read,
|
|
.write = mcp23s08_write,
|
|
.read_regs = mcp23s08_read_regs,
|
|
};
|
|
|
|
static const struct mcp23s08_ops mcp23s17_ops = {
|
|
.read = mcp23s17_read,
|
|
.write = mcp23s17_write,
|
|
.read_regs = mcp23s17_read_regs,
|
|
};
|
|
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
int status;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
mcp->cache[MCP_IODIR] |= (1 << offset);
|
|
status = mcp->ops->write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]);
|
|
mutex_unlock(&mcp->lock);
|
|
return status;
|
|
}
|
|
|
|
static int mcp23s08_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
int status;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
|
|
/* REVISIT reading this clears any IRQ ... */
|
|
status = mcp->ops->read(mcp, MCP_GPIO);
|
|
if (status < 0)
|
|
status = 0;
|
|
else {
|
|
mcp->cache[MCP_GPIO] = status;
|
|
status = !!(status & (1 << offset));
|
|
}
|
|
mutex_unlock(&mcp->lock);
|
|
return status;
|
|
}
|
|
|
|
static int __mcp23s08_set(struct mcp23s08 *mcp, unsigned mask, int value)
|
|
{
|
|
unsigned olat = mcp->cache[MCP_OLAT];
|
|
|
|
if (value)
|
|
olat |= mask;
|
|
else
|
|
olat &= ~mask;
|
|
mcp->cache[MCP_OLAT] = olat;
|
|
return mcp->ops->write(mcp, MCP_OLAT, olat);
|
|
}
|
|
|
|
static void mcp23s08_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
unsigned mask = 1 << offset;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
__mcp23s08_set(mcp, mask, value);
|
|
mutex_unlock(&mcp->lock);
|
|
}
|
|
|
|
static int
|
|
mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
unsigned mask = 1 << offset;
|
|
int status;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
status = __mcp23s08_set(mcp, mask, value);
|
|
if (status == 0) {
|
|
mcp->cache[MCP_IODIR] &= ~mask;
|
|
status = mcp->ops->write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]);
|
|
}
|
|
mutex_unlock(&mcp->lock);
|
|
return status;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
static irqreturn_t mcp23s08_irq(int irq, void *data)
|
|
{
|
|
struct mcp23s08 *mcp = data;
|
|
int intcap, intf, i;
|
|
unsigned int child_irq;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
intf = mcp->ops->read(mcp, MCP_INTF);
|
|
if (intf < 0) {
|
|
mutex_unlock(&mcp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
mcp->cache[MCP_INTF] = intf;
|
|
|
|
intcap = mcp->ops->read(mcp, MCP_INTCAP);
|
|
if (intcap < 0) {
|
|
mutex_unlock(&mcp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
mcp->cache[MCP_INTCAP] = intcap;
|
|
mutex_unlock(&mcp->lock);
|
|
|
|
|
|
for (i = 0; i < mcp->chip.ngpio; i++) {
|
|
if ((BIT(i) & mcp->cache[MCP_INTF]) &&
|
|
((BIT(i) & intcap & mcp->irq_rise) ||
|
|
(mcp->irq_fall & ~intcap & BIT(i)))) {
|
|
child_irq = irq_find_mapping(mcp->irq_domain, i);
|
|
handle_nested_irq(child_irq);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mcp23s08_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
|
|
|
return irq_find_mapping(mcp->irq_domain, offset);
|
|
}
|
|
|
|
static void mcp23s08_irq_mask(struct irq_data *data)
|
|
{
|
|
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
|
unsigned int pos = data->hwirq;
|
|
|
|
mcp->cache[MCP_GPINTEN] &= ~BIT(pos);
|
|
}
|
|
|
|
static void mcp23s08_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
|
unsigned int pos = data->hwirq;
|
|
|
|
mcp->cache[MCP_GPINTEN] |= BIT(pos);
|
|
}
|
|
|
|
static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
|
unsigned int pos = data->hwirq;
|
|
int status = 0;
|
|
|
|
if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
|
|
mcp->cache[MCP_INTCON] &= ~BIT(pos);
|
|
mcp->irq_rise |= BIT(pos);
|
|
mcp->irq_fall |= BIT(pos);
|
|
} else if (type & IRQ_TYPE_EDGE_RISING) {
|
|
mcp->cache[MCP_INTCON] &= ~BIT(pos);
|
|
mcp->irq_rise |= BIT(pos);
|
|
mcp->irq_fall &= ~BIT(pos);
|
|
} else if (type & IRQ_TYPE_EDGE_FALLING) {
|
|
mcp->cache[MCP_INTCON] &= ~BIT(pos);
|
|
mcp->irq_rise &= ~BIT(pos);
|
|
mcp->irq_fall |= BIT(pos);
|
|
} else
|
|
return -EINVAL;
|
|
|
|
return status;
|
|
}
|
|
|
|
static void mcp23s08_irq_bus_lock(struct irq_data *data)
|
|
{
|
|
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
|
|
|
mutex_lock(&mcp->irq_lock);
|
|
}
|
|
|
|
static void mcp23s08_irq_bus_unlock(struct irq_data *data)
|
|
{
|
|
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
|
|
|
mutex_lock(&mcp->lock);
|
|
mcp->ops->write(mcp, MCP_GPINTEN, mcp->cache[MCP_GPINTEN]);
|
|
mcp->ops->write(mcp, MCP_DEFVAL, mcp->cache[MCP_DEFVAL]);
|
|
mcp->ops->write(mcp, MCP_INTCON, mcp->cache[MCP_INTCON]);
|
|
mutex_unlock(&mcp->lock);
|
|
mutex_unlock(&mcp->irq_lock);
|
|
}
|
|
|
|
static int mcp23s08_irq_reqres(struct irq_data *data)
|
|
{
|
|
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
|
|
|
if (gpiochip_lock_as_irq(&mcp->chip, data->hwirq)) {
|
|
dev_err(mcp->chip.dev,
|
|
"unable to lock HW IRQ %lu for IRQ usage\n",
|
|
data->hwirq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mcp23s08_irq_relres(struct irq_data *data)
|
|
{
|
|
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
|
|
|
gpiochip_unlock_as_irq(&mcp->chip, data->hwirq);
|
|
}
|
|
|
|
static struct irq_chip mcp23s08_irq_chip = {
|
|
.name = "gpio-mcp23xxx",
|
|
.irq_mask = mcp23s08_irq_mask,
|
|
.irq_unmask = mcp23s08_irq_unmask,
|
|
.irq_set_type = mcp23s08_irq_set_type,
|
|
.irq_bus_lock = mcp23s08_irq_bus_lock,
|
|
.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock,
|
|
.irq_request_resources = mcp23s08_irq_reqres,
|
|
.irq_release_resources = mcp23s08_irq_relres,
|
|
};
|
|
|
|
static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
|
|
{
|
|
struct gpio_chip *chip = &mcp->chip;
|
|
int err, irq, j;
|
|
unsigned long irqflags = IRQF_ONESHOT | IRQF_SHARED;
|
|
|
|
mutex_init(&mcp->irq_lock);
|
|
|
|
mcp->irq_domain = irq_domain_add_linear(chip->dev->of_node, chip->ngpio,
|
|
&irq_domain_simple_ops, mcp);
|
|
if (!mcp->irq_domain)
|
|
return -ENODEV;
|
|
|
|
if (mcp->irq_active_high)
|
|
irqflags |= IRQF_TRIGGER_HIGH;
|
|
else
|
|
irqflags |= IRQF_TRIGGER_LOW;
|
|
|
|
err = devm_request_threaded_irq(chip->dev, mcp->irq, NULL, mcp23s08_irq,
|
|
irqflags, dev_name(chip->dev), mcp);
|
|
if (err != 0) {
|
|
dev_err(chip->dev, "unable to request IRQ#%d: %d\n",
|
|
mcp->irq, err);
|
|
return err;
|
|
}
|
|
|
|
chip->to_irq = mcp23s08_gpio_to_irq;
|
|
|
|
for (j = 0; j < mcp->chip.ngpio; j++) {
|
|
irq = irq_create_mapping(mcp->irq_domain, j);
|
|
irq_set_lockdep_class(irq, &gpio_lock_class);
|
|
irq_set_chip_data(irq, mcp);
|
|
irq_set_chip(irq, &mcp23s08_irq_chip);
|
|
irq_set_nested_thread(irq, true);
|
|
#ifdef CONFIG_ARM
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
#else
|
|
irq_set_noprobe(irq);
|
|
#endif
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mcp23s08_irq_teardown(struct mcp23s08 *mcp)
|
|
{
|
|
unsigned int irq, i;
|
|
|
|
for (i = 0; i < mcp->chip.ngpio; i++) {
|
|
irq = irq_find_mapping(mcp->irq_domain, i);
|
|
if (irq > 0)
|
|
irq_dispose_mapping(irq);
|
|
}
|
|
|
|
irq_domain_remove(mcp->irq_domain);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
/*
|
|
* This shows more info than the generic gpio dump code:
|
|
* pullups, deglitching, open drain drive.
|
|
*/
|
|
static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
struct mcp23s08 *mcp;
|
|
char bank;
|
|
int t;
|
|
unsigned mask;
|
|
|
|
mcp = container_of(chip, struct mcp23s08, chip);
|
|
|
|
/* NOTE: we only handle one bank for now ... */
|
|
bank = '0' + ((mcp->addr >> 1) & 0x7);
|
|
|
|
mutex_lock(&mcp->lock);
|
|
t = mcp->ops->read_regs(mcp, 0, mcp->cache, ARRAY_SIZE(mcp->cache));
|
|
if (t < 0) {
|
|
seq_printf(s, " I/O ERROR %d\n", t);
|
|
goto done;
|
|
}
|
|
|
|
for (t = 0, mask = 1; t < chip->ngpio; t++, mask <<= 1) {
|
|
const char *label;
|
|
|
|
label = gpiochip_is_requested(chip, t);
|
|
if (!label)
|
|
continue;
|
|
|
|
seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s",
|
|
chip->base + t, bank, t, label,
|
|
(mcp->cache[MCP_IODIR] & mask) ? "in " : "out",
|
|
(mcp->cache[MCP_GPIO] & mask) ? "hi" : "lo",
|
|
(mcp->cache[MCP_GPPU] & mask) ? "up" : " ");
|
|
/* NOTE: ignoring the irq-related registers */
|
|
seq_puts(s, "\n");
|
|
}
|
|
done:
|
|
mutex_unlock(&mcp->lock);
|
|
}
|
|
|
|
#else
|
|
#define mcp23s08_dbg_show NULL
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
|
|
void *data, unsigned addr, unsigned type,
|
|
struct mcp23s08_platform_data *pdata, int cs)
|
|
{
|
|
int status;
|
|
bool mirror = false;
|
|
|
|
mutex_init(&mcp->lock);
|
|
|
|
mcp->data = data;
|
|
mcp->addr = addr;
|
|
mcp->irq_active_high = false;
|
|
|
|
mcp->chip.direction_input = mcp23s08_direction_input;
|
|
mcp->chip.get = mcp23s08_get;
|
|
mcp->chip.direction_output = mcp23s08_direction_output;
|
|
mcp->chip.set = mcp23s08_set;
|
|
mcp->chip.dbg_show = mcp23s08_dbg_show;
|
|
#ifdef CONFIG_OF
|
|
mcp->chip.of_gpio_n_cells = 2;
|
|
mcp->chip.of_node = dev->of_node;
|
|
#endif
|
|
|
|
switch (type) {
|
|
#ifdef CONFIG_SPI_MASTER
|
|
case MCP_TYPE_S08:
|
|
mcp->ops = &mcp23s08_ops;
|
|
mcp->chip.ngpio = 8;
|
|
mcp->chip.label = "mcp23s08";
|
|
break;
|
|
|
|
case MCP_TYPE_S17:
|
|
mcp->ops = &mcp23s17_ops;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23s17";
|
|
break;
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
case MCP_TYPE_008:
|
|
mcp->ops = &mcp23008_ops;
|
|
mcp->chip.ngpio = 8;
|
|
mcp->chip.label = "mcp23008";
|
|
break;
|
|
|
|
case MCP_TYPE_017:
|
|
mcp->ops = &mcp23017_ops;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23017";
|
|
break;
|
|
#endif /* CONFIG_I2C */
|
|
|
|
default:
|
|
dev_err(dev, "invalid device type (%d)\n", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mcp->chip.base = pdata->base;
|
|
mcp->chip.can_sleep = true;
|
|
mcp->chip.dev = dev;
|
|
mcp->chip.owner = THIS_MODULE;
|
|
|
|
/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
|
|
* and MCP_IOCON.HAEN = 1, so we work with all chips.
|
|
*/
|
|
|
|
status = mcp->ops->read(mcp, MCP_IOCON);
|
|
if (status < 0)
|
|
goto fail;
|
|
|
|
mcp->irq_controller = pdata->irq_controller;
|
|
if (mcp->irq && mcp->irq_controller) {
|
|
mcp->irq_active_high =
|
|
of_property_read_bool(mcp->chip.dev->of_node,
|
|
"microchip,irq-active-high");
|
|
|
|
if (type == MCP_TYPE_017)
|
|
mirror = pdata->mirror;
|
|
}
|
|
|
|
if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror ||
|
|
mcp->irq_active_high) {
|
|
/* mcp23s17 has IOCON twice, make sure they are in sync */
|
|
status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
|
|
status |= IOCON_HAEN | (IOCON_HAEN << 8);
|
|
if (mcp->irq_active_high)
|
|
status |= IOCON_INTPOL | (IOCON_INTPOL << 8);
|
|
else
|
|
status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8));
|
|
|
|
if (mirror)
|
|
status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
|
|
|
|
status = mcp->ops->write(mcp, MCP_IOCON, status);
|
|
if (status < 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* configure ~100K pullups */
|
|
status = mcp->ops->write(mcp, MCP_GPPU, pdata->chip[cs].pullups);
|
|
if (status < 0)
|
|
goto fail;
|
|
|
|
status = mcp->ops->read_regs(mcp, 0, mcp->cache, ARRAY_SIZE(mcp->cache));
|
|
if (status < 0)
|
|
goto fail;
|
|
|
|
/* disable inverter on input */
|
|
if (mcp->cache[MCP_IPOL] != 0) {
|
|
mcp->cache[MCP_IPOL] = 0;
|
|
status = mcp->ops->write(mcp, MCP_IPOL, 0);
|
|
if (status < 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* disable irqs */
|
|
if (mcp->cache[MCP_GPINTEN] != 0) {
|
|
mcp->cache[MCP_GPINTEN] = 0;
|
|
status = mcp->ops->write(mcp, MCP_GPINTEN, 0);
|
|
if (status < 0)
|
|
goto fail;
|
|
}
|
|
|
|
status = gpiochip_add(&mcp->chip);
|
|
if (status < 0)
|
|
goto fail;
|
|
|
|
if (mcp->irq && mcp->irq_controller) {
|
|
status = mcp23s08_irq_setup(mcp);
|
|
if (status) {
|
|
mcp23s08_irq_teardown(mcp);
|
|
goto fail;
|
|
}
|
|
}
|
|
fail:
|
|
if (status < 0)
|
|
dev_dbg(dev, "can't setup chip %d, --> %d\n",
|
|
addr, status);
|
|
return status;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_OF
|
|
#ifdef CONFIG_SPI_MASTER
|
|
static const struct of_device_id mcp23s08_spi_of_match[] = {
|
|
{
|
|
.compatible = "microchip,mcp23s08",
|
|
.data = (void *) MCP_TYPE_S08,
|
|
},
|
|
{
|
|
.compatible = "microchip,mcp23s17",
|
|
.data = (void *) MCP_TYPE_S17,
|
|
},
|
|
/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
|
|
{
|
|
.compatible = "mcp,mcp23s08",
|
|
.data = (void *) MCP_TYPE_S08,
|
|
},
|
|
{
|
|
.compatible = "mcp,mcp23s17",
|
|
.data = (void *) MCP_TYPE_S17,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match);
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
static const struct of_device_id mcp23s08_i2c_of_match[] = {
|
|
{
|
|
.compatible = "microchip,mcp23008",
|
|
.data = (void *) MCP_TYPE_008,
|
|
},
|
|
{
|
|
.compatible = "microchip,mcp23017",
|
|
.data = (void *) MCP_TYPE_017,
|
|
},
|
|
/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
|
|
{
|
|
.compatible = "mcp,mcp23008",
|
|
.data = (void *) MCP_TYPE_008,
|
|
},
|
|
{
|
|
.compatible = "mcp,mcp23017",
|
|
.data = (void *) MCP_TYPE_017,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match);
|
|
#endif
|
|
#endif /* CONFIG_OF */
|
|
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int mcp230xx_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mcp23s08_platform_data *pdata, local_pdata;
|
|
struct mcp23s08 *mcp;
|
|
int status;
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_device(of_match_ptr(mcp23s08_i2c_of_match),
|
|
&client->dev);
|
|
if (match) {
|
|
pdata = &local_pdata;
|
|
pdata->base = -1;
|
|
pdata->chip[0].pullups = 0;
|
|
pdata->irq_controller = of_property_read_bool(
|
|
client->dev.of_node,
|
|
"interrupt-controller");
|
|
pdata->mirror = of_property_read_bool(client->dev.of_node,
|
|
"microchip,irq-mirror");
|
|
client->irq = irq_of_parse_and_map(client->dev.of_node, 0);
|
|
} else {
|
|
pdata = dev_get_platdata(&client->dev);
|
|
if (!pdata || !gpio_is_valid(pdata->base)) {
|
|
dev_dbg(&client->dev, "invalid platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
mcp = kzalloc(sizeof(*mcp), GFP_KERNEL);
|
|
if (!mcp)
|
|
return -ENOMEM;
|
|
|
|
mcp->irq = client->irq;
|
|
status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
|
|
id->driver_data, pdata, 0);
|
|
if (status)
|
|
goto fail;
|
|
|
|
i2c_set_clientdata(client, mcp);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
kfree(mcp);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int mcp230xx_remove(struct i2c_client *client)
|
|
{
|
|
struct mcp23s08 *mcp = i2c_get_clientdata(client);
|
|
|
|
if (client->irq && mcp->irq_controller)
|
|
mcp23s08_irq_teardown(mcp);
|
|
|
|
gpiochip_remove(&mcp->chip);
|
|
kfree(mcp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id mcp230xx_id[] = {
|
|
{ "mcp23008", MCP_TYPE_008 },
|
|
{ "mcp23017", MCP_TYPE_017 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
|
|
|
|
static struct i2c_driver mcp230xx_driver = {
|
|
.driver = {
|
|
.name = "mcp230xx",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(mcp23s08_i2c_of_match),
|
|
},
|
|
.probe = mcp230xx_probe,
|
|
.remove = mcp230xx_remove,
|
|
.id_table = mcp230xx_id,
|
|
};
|
|
|
|
static int __init mcp23s08_i2c_init(void)
|
|
{
|
|
return i2c_add_driver(&mcp230xx_driver);
|
|
}
|
|
|
|
static void mcp23s08_i2c_exit(void)
|
|
{
|
|
i2c_del_driver(&mcp230xx_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __init mcp23s08_i2c_init(void) { return 0; }
|
|
static void mcp23s08_i2c_exit(void) { }
|
|
|
|
#endif /* CONFIG_I2C */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_SPI_MASTER
|
|
|
|
static int mcp23s08_probe(struct spi_device *spi)
|
|
{
|
|
struct mcp23s08_platform_data *pdata, local_pdata;
|
|
unsigned addr;
|
|
int chips = 0;
|
|
struct mcp23s08_driver_data *data;
|
|
int status, type;
|
|
unsigned ngpio = 0;
|
|
const struct of_device_id *match;
|
|
u32 spi_present_mask = 0;
|
|
|
|
match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev);
|
|
if (match) {
|
|
type = (int)(uintptr_t)match->data;
|
|
status = of_property_read_u32(spi->dev.of_node,
|
|
"microchip,spi-present-mask", &spi_present_mask);
|
|
if (status) {
|
|
status = of_property_read_u32(spi->dev.of_node,
|
|
"mcp,spi-present-mask", &spi_present_mask);
|
|
if (status) {
|
|
dev_err(&spi->dev,
|
|
"DT has no spi-present-mask\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
if ((spi_present_mask <= 0) || (spi_present_mask >= 256)) {
|
|
dev_err(&spi->dev, "invalid spi-present-mask\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pdata = &local_pdata;
|
|
pdata->base = -1;
|
|
for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
|
|
pdata->chip[addr].pullups = 0;
|
|
if (spi_present_mask & (1 << addr))
|
|
chips++;
|
|
}
|
|
pdata->irq_controller = of_property_read_bool(
|
|
spi->dev.of_node,
|
|
"interrupt-controller");
|
|
pdata->mirror = of_property_read_bool(spi->dev.of_node,
|
|
"microchip,irq-mirror");
|
|
} else {
|
|
type = spi_get_device_id(spi)->driver_data;
|
|
pdata = dev_get_platdata(&spi->dev);
|
|
if (!pdata || !gpio_is_valid(pdata->base)) {
|
|
dev_dbg(&spi->dev,
|
|
"invalid or missing platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
|
|
if (!pdata->chip[addr].is_present)
|
|
continue;
|
|
chips++;
|
|
if ((type == MCP_TYPE_S08) && (addr > 3)) {
|
|
dev_err(&spi->dev,
|
|
"mcp23s08 only supports address 0..3\n");
|
|
return -EINVAL;
|
|
}
|
|
spi_present_mask |= 1 << addr;
|
|
}
|
|
}
|
|
|
|
if (!chips)
|
|
return -ENODEV;
|
|
|
|
data = kzalloc(sizeof(*data) + chips * sizeof(struct mcp23s08),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
spi_set_drvdata(spi, data);
|
|
|
|
spi->irq = irq_of_parse_and_map(spi->dev.of_node, 0);
|
|
|
|
for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
|
|
if (!(spi_present_mask & (1 << addr)))
|
|
continue;
|
|
chips--;
|
|
data->mcp[addr] = &data->chip[chips];
|
|
data->mcp[addr]->irq = spi->irq;
|
|
status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
|
|
0x40 | (addr << 1), type, pdata,
|
|
addr);
|
|
if (status < 0)
|
|
goto fail;
|
|
|
|
if (pdata->base != -1)
|
|
pdata->base += (type == MCP_TYPE_S17) ? 16 : 8;
|
|
ngpio += (type == MCP_TYPE_S17) ? 16 : 8;
|
|
}
|
|
data->ngpio = ngpio;
|
|
|
|
/* NOTE: these chips have a relatively sane IRQ framework, with
|
|
* per-signal masking and level/edge triggering. It's not yet
|
|
* handled here...
|
|
*/
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) {
|
|
|
|
if (!data->mcp[addr])
|
|
continue;
|
|
gpiochip_remove(&data->mcp[addr]->chip);
|
|
}
|
|
kfree(data);
|
|
return status;
|
|
}
|
|
|
|
static int mcp23s08_remove(struct spi_device *spi)
|
|
{
|
|
struct mcp23s08_driver_data *data = spi_get_drvdata(spi);
|
|
unsigned addr;
|
|
|
|
for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) {
|
|
|
|
if (!data->mcp[addr])
|
|
continue;
|
|
|
|
if (spi->irq && data->mcp[addr]->irq_controller)
|
|
mcp23s08_irq_teardown(data->mcp[addr]);
|
|
gpiochip_remove(&data->mcp[addr]->chip);
|
|
}
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id mcp23s08_ids[] = {
|
|
{ "mcp23s08", MCP_TYPE_S08 },
|
|
{ "mcp23s17", MCP_TYPE_S17 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, mcp23s08_ids);
|
|
|
|
static struct spi_driver mcp23s08_driver = {
|
|
.probe = mcp23s08_probe,
|
|
.remove = mcp23s08_remove,
|
|
.id_table = mcp23s08_ids,
|
|
.driver = {
|
|
.name = "mcp23s08",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(mcp23s08_spi_of_match),
|
|
},
|
|
};
|
|
|
|
static int __init mcp23s08_spi_init(void)
|
|
{
|
|
return spi_register_driver(&mcp23s08_driver);
|
|
}
|
|
|
|
static void mcp23s08_spi_exit(void)
|
|
{
|
|
spi_unregister_driver(&mcp23s08_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __init mcp23s08_spi_init(void) { return 0; }
|
|
static void mcp23s08_spi_exit(void) { }
|
|
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int __init mcp23s08_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = mcp23s08_spi_init();
|
|
if (ret)
|
|
goto spi_fail;
|
|
|
|
ret = mcp23s08_i2c_init();
|
|
if (ret)
|
|
goto i2c_fail;
|
|
|
|
return 0;
|
|
|
|
i2c_fail:
|
|
mcp23s08_spi_exit();
|
|
spi_fail:
|
|
return ret;
|
|
}
|
|
/* register after spi/i2c postcore initcall and before
|
|
* subsys initcalls that may rely on these GPIOs
|
|
*/
|
|
subsys_initcall(mcp23s08_init);
|
|
|
|
static void __exit mcp23s08_exit(void)
|
|
{
|
|
mcp23s08_spi_exit();
|
|
mcp23s08_i2c_exit();
|
|
}
|
|
module_exit(mcp23s08_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|