mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 02:49:05 +07:00
027063b160
RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commite9af4ea2b9
("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commite9af4ea2b9
, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes:e9af4ea2b9
("drm/i915: Avoid waitboosting on the active request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk (cherry picked from commit60548c554b
) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
9780 lines
277 KiB
C
9780 lines
277 KiB
C
/*
|
|
* Copyright © 2012 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Eugeni Dodonov <eugeni.dodonov@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/cpufreq.h>
|
|
#include <drm/drm_plane_helper.h>
|
|
#include "i915_drv.h"
|
|
#include "intel_drv.h"
|
|
#include "../../../platform/x86/intel_ips.h"
|
|
#include <linux/module.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
|
|
/**
|
|
* DOC: RC6
|
|
*
|
|
* RC6 is a special power stage which allows the GPU to enter an very
|
|
* low-voltage mode when idle, using down to 0V while at this stage. This
|
|
* stage is entered automatically when the GPU is idle when RC6 support is
|
|
* enabled, and as soon as new workload arises GPU wakes up automatically as well.
|
|
*
|
|
* There are different RC6 modes available in Intel GPU, which differentiate
|
|
* among each other with the latency required to enter and leave RC6 and
|
|
* voltage consumed by the GPU in different states.
|
|
*
|
|
* The combination of the following flags define which states GPU is allowed
|
|
* to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and
|
|
* RC6pp is deepest RC6. Their support by hardware varies according to the
|
|
* GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one
|
|
* which brings the most power savings; deeper states save more power, but
|
|
* require higher latency to switch to and wake up.
|
|
*/
|
|
|
|
static void gen9_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (HAS_LLC(dev_priv)) {
|
|
/*
|
|
* WaCompressedResourceDisplayNewHashMode:skl,kbl
|
|
* Display WA #0390: skl,kbl
|
|
*
|
|
* Must match Sampler, Pixel Back End, and Media. See
|
|
* WaCompressedResourceSamplerPbeMediaNewHashMode.
|
|
*/
|
|
I915_WRITE(CHICKEN_PAR1_1,
|
|
I915_READ(CHICKEN_PAR1_1) |
|
|
SKL_DE_COMPRESSED_HASH_MODE);
|
|
}
|
|
|
|
/* See Bspec note for PSR2_CTL bit 31, Wa#828:skl,bxt,kbl,cfl */
|
|
I915_WRITE(CHICKEN_PAR1_1,
|
|
I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP);
|
|
|
|
/* WaEnableChickenDCPR:skl,bxt,kbl,glk,cfl */
|
|
I915_WRITE(GEN8_CHICKEN_DCPR_1,
|
|
I915_READ(GEN8_CHICKEN_DCPR_1) | MASK_WAKEMEM);
|
|
|
|
/* WaFbcTurnOffFbcWatermark:skl,bxt,kbl,cfl */
|
|
/* WaFbcWakeMemOn:skl,bxt,kbl,glk,cfl */
|
|
I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
|
|
DISP_FBC_WM_DIS |
|
|
DISP_FBC_MEMORY_WAKE);
|
|
|
|
/* WaFbcHighMemBwCorruptionAvoidance:skl,bxt,kbl,cfl */
|
|
I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) |
|
|
ILK_DPFC_DISABLE_DUMMY0);
|
|
|
|
if (IS_SKYLAKE(dev_priv)) {
|
|
/* WaDisableDopClockGating */
|
|
I915_WRITE(GEN7_MISCCPCTL, I915_READ(GEN7_MISCCPCTL)
|
|
& ~GEN7_DOP_CLOCK_GATE_ENABLE);
|
|
}
|
|
}
|
|
|
|
static void bxt_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
gen9_init_clock_gating(dev_priv);
|
|
|
|
/* WaDisableSDEUnitClockGating:bxt */
|
|
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
|
|
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/*
|
|
* FIXME:
|
|
* GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ applies on 3x6 GT SKUs only.
|
|
*/
|
|
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
|
|
GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ);
|
|
|
|
/*
|
|
* Wa: Backlight PWM may stop in the asserted state, causing backlight
|
|
* to stay fully on.
|
|
*/
|
|
I915_WRITE(GEN9_CLKGATE_DIS_0, I915_READ(GEN9_CLKGATE_DIS_0) |
|
|
PWM1_GATING_DIS | PWM2_GATING_DIS);
|
|
}
|
|
|
|
static void glk_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
gen9_init_clock_gating(dev_priv);
|
|
|
|
/*
|
|
* WaDisablePWMClockGating:glk
|
|
* Backlight PWM may stop in the asserted state, causing backlight
|
|
* to stay fully on.
|
|
*/
|
|
I915_WRITE(GEN9_CLKGATE_DIS_0, I915_READ(GEN9_CLKGATE_DIS_0) |
|
|
PWM1_GATING_DIS | PWM2_GATING_DIS);
|
|
|
|
/* WaDDIIOTimeout:glk */
|
|
if (IS_GLK_REVID(dev_priv, 0, GLK_REVID_A1)) {
|
|
u32 val = I915_READ(CHICKEN_MISC_2);
|
|
val &= ~(GLK_CL0_PWR_DOWN |
|
|
GLK_CL1_PWR_DOWN |
|
|
GLK_CL2_PWR_DOWN);
|
|
I915_WRITE(CHICKEN_MISC_2, val);
|
|
}
|
|
|
|
}
|
|
|
|
static void i915_pineview_get_mem_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = I915_READ(CLKCFG);
|
|
|
|
switch (tmp & CLKCFG_FSB_MASK) {
|
|
case CLKCFG_FSB_533:
|
|
dev_priv->fsb_freq = 533; /* 133*4 */
|
|
break;
|
|
case CLKCFG_FSB_800:
|
|
dev_priv->fsb_freq = 800; /* 200*4 */
|
|
break;
|
|
case CLKCFG_FSB_667:
|
|
dev_priv->fsb_freq = 667; /* 167*4 */
|
|
break;
|
|
case CLKCFG_FSB_400:
|
|
dev_priv->fsb_freq = 400; /* 100*4 */
|
|
break;
|
|
}
|
|
|
|
switch (tmp & CLKCFG_MEM_MASK) {
|
|
case CLKCFG_MEM_533:
|
|
dev_priv->mem_freq = 533;
|
|
break;
|
|
case CLKCFG_MEM_667:
|
|
dev_priv->mem_freq = 667;
|
|
break;
|
|
case CLKCFG_MEM_800:
|
|
dev_priv->mem_freq = 800;
|
|
break;
|
|
}
|
|
|
|
/* detect pineview DDR3 setting */
|
|
tmp = I915_READ(CSHRDDR3CTL);
|
|
dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
|
|
}
|
|
|
|
static void i915_ironlake_get_mem_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u16 ddrpll, csipll;
|
|
|
|
ddrpll = I915_READ16(DDRMPLL1);
|
|
csipll = I915_READ16(CSIPLL0);
|
|
|
|
switch (ddrpll & 0xff) {
|
|
case 0xc:
|
|
dev_priv->mem_freq = 800;
|
|
break;
|
|
case 0x10:
|
|
dev_priv->mem_freq = 1066;
|
|
break;
|
|
case 0x14:
|
|
dev_priv->mem_freq = 1333;
|
|
break;
|
|
case 0x18:
|
|
dev_priv->mem_freq = 1600;
|
|
break;
|
|
default:
|
|
DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
|
|
ddrpll & 0xff);
|
|
dev_priv->mem_freq = 0;
|
|
break;
|
|
}
|
|
|
|
dev_priv->ips.r_t = dev_priv->mem_freq;
|
|
|
|
switch (csipll & 0x3ff) {
|
|
case 0x00c:
|
|
dev_priv->fsb_freq = 3200;
|
|
break;
|
|
case 0x00e:
|
|
dev_priv->fsb_freq = 3733;
|
|
break;
|
|
case 0x010:
|
|
dev_priv->fsb_freq = 4266;
|
|
break;
|
|
case 0x012:
|
|
dev_priv->fsb_freq = 4800;
|
|
break;
|
|
case 0x014:
|
|
dev_priv->fsb_freq = 5333;
|
|
break;
|
|
case 0x016:
|
|
dev_priv->fsb_freq = 5866;
|
|
break;
|
|
case 0x018:
|
|
dev_priv->fsb_freq = 6400;
|
|
break;
|
|
default:
|
|
DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
|
|
csipll & 0x3ff);
|
|
dev_priv->fsb_freq = 0;
|
|
break;
|
|
}
|
|
|
|
if (dev_priv->fsb_freq == 3200) {
|
|
dev_priv->ips.c_m = 0;
|
|
} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
|
|
dev_priv->ips.c_m = 1;
|
|
} else {
|
|
dev_priv->ips.c_m = 2;
|
|
}
|
|
}
|
|
|
|
static const struct cxsr_latency cxsr_latency_table[] = {
|
|
{1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
|
|
{1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
|
|
{1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
|
|
{1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */
|
|
{1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */
|
|
|
|
{1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
|
|
{1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
|
|
{1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
|
|
{1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */
|
|
{1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */
|
|
|
|
{1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
|
|
{1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
|
|
{1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
|
|
{1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */
|
|
{1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
|
|
{0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
|
|
{0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
|
|
{0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */
|
|
{0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
|
|
{0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
|
|
{0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
|
|
{0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */
|
|
{0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
|
|
{0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
|
|
{0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
|
|
{0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */
|
|
{0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
|
|
};
|
|
|
|
static const struct cxsr_latency *intel_get_cxsr_latency(bool is_desktop,
|
|
bool is_ddr3,
|
|
int fsb,
|
|
int mem)
|
|
{
|
|
const struct cxsr_latency *latency;
|
|
int i;
|
|
|
|
if (fsb == 0 || mem == 0)
|
|
return NULL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
|
|
latency = &cxsr_latency_table[i];
|
|
if (is_desktop == latency->is_desktop &&
|
|
is_ddr3 == latency->is_ddr3 &&
|
|
fsb == latency->fsb_freq && mem == latency->mem_freq)
|
|
return latency;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
|
|
if (enable)
|
|
val &= ~FORCE_DDR_HIGH_FREQ;
|
|
else
|
|
val |= FORCE_DDR_HIGH_FREQ;
|
|
val &= ~FORCE_DDR_LOW_FREQ;
|
|
val |= FORCE_DDR_FREQ_REQ_ACK;
|
|
vlv_punit_write(dev_priv, PUNIT_REG_DDR_SETUP2, val);
|
|
|
|
if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2) &
|
|
FORCE_DDR_FREQ_REQ_ACK) == 0, 3))
|
|
DRM_ERROR("timed out waiting for Punit DDR DVFS request\n");
|
|
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
}
|
|
|
|
static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
|
|
if (enable)
|
|
val |= DSP_MAXFIFO_PM5_ENABLE;
|
|
else
|
|
val &= ~DSP_MAXFIFO_PM5_ENABLE;
|
|
vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
|
|
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
}
|
|
|
|
#define FW_WM(value, plane) \
|
|
(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK)
|
|
|
|
static bool _intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
|
|
{
|
|
bool was_enabled;
|
|
u32 val;
|
|
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
was_enabled = I915_READ(FW_BLC_SELF_VLV) & FW_CSPWRDWNEN;
|
|
I915_WRITE(FW_BLC_SELF_VLV, enable ? FW_CSPWRDWNEN : 0);
|
|
POSTING_READ(FW_BLC_SELF_VLV);
|
|
} else if (IS_G4X(dev_priv) || IS_I965GM(dev_priv)) {
|
|
was_enabled = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
|
|
I915_WRITE(FW_BLC_SELF, enable ? FW_BLC_SELF_EN : 0);
|
|
POSTING_READ(FW_BLC_SELF);
|
|
} else if (IS_PINEVIEW(dev_priv)) {
|
|
val = I915_READ(DSPFW3);
|
|
was_enabled = val & PINEVIEW_SELF_REFRESH_EN;
|
|
if (enable)
|
|
val |= PINEVIEW_SELF_REFRESH_EN;
|
|
else
|
|
val &= ~PINEVIEW_SELF_REFRESH_EN;
|
|
I915_WRITE(DSPFW3, val);
|
|
POSTING_READ(DSPFW3);
|
|
} else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv)) {
|
|
was_enabled = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
|
|
val = enable ? _MASKED_BIT_ENABLE(FW_BLC_SELF_EN) :
|
|
_MASKED_BIT_DISABLE(FW_BLC_SELF_EN);
|
|
I915_WRITE(FW_BLC_SELF, val);
|
|
POSTING_READ(FW_BLC_SELF);
|
|
} else if (IS_I915GM(dev_priv)) {
|
|
/*
|
|
* FIXME can't find a bit like this for 915G, and
|
|
* and yet it does have the related watermark in
|
|
* FW_BLC_SELF. What's going on?
|
|
*/
|
|
was_enabled = I915_READ(INSTPM) & INSTPM_SELF_EN;
|
|
val = enable ? _MASKED_BIT_ENABLE(INSTPM_SELF_EN) :
|
|
_MASKED_BIT_DISABLE(INSTPM_SELF_EN);
|
|
I915_WRITE(INSTPM, val);
|
|
POSTING_READ(INSTPM);
|
|
} else {
|
|
return false;
|
|
}
|
|
|
|
trace_intel_memory_cxsr(dev_priv, was_enabled, enable);
|
|
|
|
DRM_DEBUG_KMS("memory self-refresh is %s (was %s)\n",
|
|
enableddisabled(enable),
|
|
enableddisabled(was_enabled));
|
|
|
|
return was_enabled;
|
|
}
|
|
|
|
/**
|
|
* intel_set_memory_cxsr - Configure CxSR state
|
|
* @dev_priv: i915 device
|
|
* @enable: Allow vs. disallow CxSR
|
|
*
|
|
* Allow or disallow the system to enter a special CxSR
|
|
* (C-state self refresh) state. What typically happens in CxSR mode
|
|
* is that several display FIFOs may get combined into a single larger
|
|
* FIFO for a particular plane (so called max FIFO mode) to allow the
|
|
* system to defer memory fetches longer, and the memory will enter
|
|
* self refresh.
|
|
*
|
|
* Note that enabling CxSR does not guarantee that the system enter
|
|
* this special mode, nor does it guarantee that the system stays
|
|
* in that mode once entered. So this just allows/disallows the system
|
|
* to autonomously utilize the CxSR mode. Other factors such as core
|
|
* C-states will affect when/if the system actually enters/exits the
|
|
* CxSR mode.
|
|
*
|
|
* Note that on VLV/CHV this actually only controls the max FIFO mode,
|
|
* and the system is free to enter/exit memory self refresh at any time
|
|
* even when the use of CxSR has been disallowed.
|
|
*
|
|
* While the system is actually in the CxSR/max FIFO mode, some plane
|
|
* control registers will not get latched on vblank. Thus in order to
|
|
* guarantee the system will respond to changes in the plane registers
|
|
* we must always disallow CxSR prior to making changes to those registers.
|
|
* Unfortunately the system will re-evaluate the CxSR conditions at
|
|
* frame start which happens after vblank start (which is when the plane
|
|
* registers would get latched), so we can't proceed with the plane update
|
|
* during the same frame where we disallowed CxSR.
|
|
*
|
|
* Certain platforms also have a deeper HPLL SR mode. Fortunately the
|
|
* HPLL SR mode depends on CxSR itself, so we don't have to hand hold
|
|
* the hardware w.r.t. HPLL SR when writing to plane registers.
|
|
* Disallowing just CxSR is sufficient.
|
|
*/
|
|
bool intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
|
|
{
|
|
bool ret;
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
ret = _intel_set_memory_cxsr(dev_priv, enable);
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
|
dev_priv->wm.vlv.cxsr = enable;
|
|
else if (IS_G4X(dev_priv))
|
|
dev_priv->wm.g4x.cxsr = enable;
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Latency for FIFO fetches is dependent on several factors:
|
|
* - memory configuration (speed, channels)
|
|
* - chipset
|
|
* - current MCH state
|
|
* It can be fairly high in some situations, so here we assume a fairly
|
|
* pessimal value. It's a tradeoff between extra memory fetches (if we
|
|
* set this value too high, the FIFO will fetch frequently to stay full)
|
|
* and power consumption (set it too low to save power and we might see
|
|
* FIFO underruns and display "flicker").
|
|
*
|
|
* A value of 5us seems to be a good balance; safe for very low end
|
|
* platforms but not overly aggressive on lower latency configs.
|
|
*/
|
|
static const int pessimal_latency_ns = 5000;
|
|
|
|
#define VLV_FIFO_START(dsparb, dsparb2, lo_shift, hi_shift) \
|
|
((((dsparb) >> (lo_shift)) & 0xff) | ((((dsparb2) >> (hi_shift)) & 0x1) << 8))
|
|
|
|
static void vlv_get_fifo_size(struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
struct vlv_fifo_state *fifo_state = &crtc_state->wm.vlv.fifo_state;
|
|
enum pipe pipe = crtc->pipe;
|
|
int sprite0_start, sprite1_start;
|
|
|
|
switch (pipe) {
|
|
uint32_t dsparb, dsparb2, dsparb3;
|
|
case PIPE_A:
|
|
dsparb = I915_READ(DSPARB);
|
|
dsparb2 = I915_READ(DSPARB2);
|
|
sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 0, 0);
|
|
sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 8, 4);
|
|
break;
|
|
case PIPE_B:
|
|
dsparb = I915_READ(DSPARB);
|
|
dsparb2 = I915_READ(DSPARB2);
|
|
sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 16, 8);
|
|
sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 24, 12);
|
|
break;
|
|
case PIPE_C:
|
|
dsparb2 = I915_READ(DSPARB2);
|
|
dsparb3 = I915_READ(DSPARB3);
|
|
sprite0_start = VLV_FIFO_START(dsparb3, dsparb2, 0, 16);
|
|
sprite1_start = VLV_FIFO_START(dsparb3, dsparb2, 8, 20);
|
|
break;
|
|
default:
|
|
MISSING_CASE(pipe);
|
|
return;
|
|
}
|
|
|
|
fifo_state->plane[PLANE_PRIMARY] = sprite0_start;
|
|
fifo_state->plane[PLANE_SPRITE0] = sprite1_start - sprite0_start;
|
|
fifo_state->plane[PLANE_SPRITE1] = 511 - sprite1_start;
|
|
fifo_state->plane[PLANE_CURSOR] = 63;
|
|
}
|
|
|
|
static int i9xx_get_fifo_size(struct drm_i915_private *dev_priv,
|
|
enum i9xx_plane_id i9xx_plane)
|
|
{
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x7f;
|
|
if (i9xx_plane == PLANE_B)
|
|
size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %c: %d\n",
|
|
dsparb, plane_name(i9xx_plane), size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int i830_get_fifo_size(struct drm_i915_private *dev_priv,
|
|
enum i9xx_plane_id i9xx_plane)
|
|
{
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x1ff;
|
|
if (i9xx_plane == PLANE_B)
|
|
size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
|
|
size >>= 1; /* Convert to cachelines */
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %c: %d\n",
|
|
dsparb, plane_name(i9xx_plane), size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int i845_get_fifo_size(struct drm_i915_private *dev_priv,
|
|
enum i9xx_plane_id i9xx_plane)
|
|
{
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x7f;
|
|
size >>= 2; /* Convert to cachelines */
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %c: %d\n",
|
|
dsparb, plane_name(i9xx_plane), size);
|
|
|
|
return size;
|
|
}
|
|
|
|
/* Pineview has different values for various configs */
|
|
static const struct intel_watermark_params pineview_display_wm = {
|
|
.fifo_size = PINEVIEW_DISPLAY_FIFO,
|
|
.max_wm = PINEVIEW_MAX_WM,
|
|
.default_wm = PINEVIEW_DFT_WM,
|
|
.guard_size = PINEVIEW_GUARD_WM,
|
|
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params pineview_display_hplloff_wm = {
|
|
.fifo_size = PINEVIEW_DISPLAY_FIFO,
|
|
.max_wm = PINEVIEW_MAX_WM,
|
|
.default_wm = PINEVIEW_DFT_HPLLOFF_WM,
|
|
.guard_size = PINEVIEW_GUARD_WM,
|
|
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params pineview_cursor_wm = {
|
|
.fifo_size = PINEVIEW_CURSOR_FIFO,
|
|
.max_wm = PINEVIEW_CURSOR_MAX_WM,
|
|
.default_wm = PINEVIEW_CURSOR_DFT_WM,
|
|
.guard_size = PINEVIEW_CURSOR_GUARD_WM,
|
|
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
|
|
.fifo_size = PINEVIEW_CURSOR_FIFO,
|
|
.max_wm = PINEVIEW_CURSOR_MAX_WM,
|
|
.default_wm = PINEVIEW_CURSOR_DFT_WM,
|
|
.guard_size = PINEVIEW_CURSOR_GUARD_WM,
|
|
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i965_cursor_wm_info = {
|
|
.fifo_size = I965_CURSOR_FIFO,
|
|
.max_wm = I965_CURSOR_MAX_WM,
|
|
.default_wm = I965_CURSOR_DFT_WM,
|
|
.guard_size = 2,
|
|
.cacheline_size = I915_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i945_wm_info = {
|
|
.fifo_size = I945_FIFO_SIZE,
|
|
.max_wm = I915_MAX_WM,
|
|
.default_wm = 1,
|
|
.guard_size = 2,
|
|
.cacheline_size = I915_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i915_wm_info = {
|
|
.fifo_size = I915_FIFO_SIZE,
|
|
.max_wm = I915_MAX_WM,
|
|
.default_wm = 1,
|
|
.guard_size = 2,
|
|
.cacheline_size = I915_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i830_a_wm_info = {
|
|
.fifo_size = I855GM_FIFO_SIZE,
|
|
.max_wm = I915_MAX_WM,
|
|
.default_wm = 1,
|
|
.guard_size = 2,
|
|
.cacheline_size = I830_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i830_bc_wm_info = {
|
|
.fifo_size = I855GM_FIFO_SIZE,
|
|
.max_wm = I915_MAX_WM/2,
|
|
.default_wm = 1,
|
|
.guard_size = 2,
|
|
.cacheline_size = I830_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i845_wm_info = {
|
|
.fifo_size = I830_FIFO_SIZE,
|
|
.max_wm = I915_MAX_WM,
|
|
.default_wm = 1,
|
|
.guard_size = 2,
|
|
.cacheline_size = I830_FIFO_LINE_SIZE,
|
|
};
|
|
|
|
/**
|
|
* intel_wm_method1 - Method 1 / "small buffer" watermark formula
|
|
* @pixel_rate: Pipe pixel rate in kHz
|
|
* @cpp: Plane bytes per pixel
|
|
* @latency: Memory wakeup latency in 0.1us units
|
|
*
|
|
* Compute the watermark using the method 1 or "small buffer"
|
|
* formula. The caller may additonally add extra cachelines
|
|
* to account for TLB misses and clock crossings.
|
|
*
|
|
* This method is concerned with the short term drain rate
|
|
* of the FIFO, ie. it does not account for blanking periods
|
|
* which would effectively reduce the average drain rate across
|
|
* a longer period. The name "small" refers to the fact the
|
|
* FIFO is relatively small compared to the amount of data
|
|
* fetched.
|
|
*
|
|
* The FIFO level vs. time graph might look something like:
|
|
*
|
|
* |\ |\
|
|
* | \ | \
|
|
* __---__---__ (- plane active, _ blanking)
|
|
* -> time
|
|
*
|
|
* or perhaps like this:
|
|
*
|
|
* |\|\ |\|\
|
|
* __----__----__ (- plane active, _ blanking)
|
|
* -> time
|
|
*
|
|
* Returns:
|
|
* The watermark in bytes
|
|
*/
|
|
static unsigned int intel_wm_method1(unsigned int pixel_rate,
|
|
unsigned int cpp,
|
|
unsigned int latency)
|
|
{
|
|
uint64_t ret;
|
|
|
|
ret = (uint64_t) pixel_rate * cpp * latency;
|
|
ret = DIV_ROUND_UP_ULL(ret, 10000);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* intel_wm_method2 - Method 2 / "large buffer" watermark formula
|
|
* @pixel_rate: Pipe pixel rate in kHz
|
|
* @htotal: Pipe horizontal total
|
|
* @width: Plane width in pixels
|
|
* @cpp: Plane bytes per pixel
|
|
* @latency: Memory wakeup latency in 0.1us units
|
|
*
|
|
* Compute the watermark using the method 2 or "large buffer"
|
|
* formula. The caller may additonally add extra cachelines
|
|
* to account for TLB misses and clock crossings.
|
|
*
|
|
* This method is concerned with the long term drain rate
|
|
* of the FIFO, ie. it does account for blanking periods
|
|
* which effectively reduce the average drain rate across
|
|
* a longer period. The name "large" refers to the fact the
|
|
* FIFO is relatively large compared to the amount of data
|
|
* fetched.
|
|
*
|
|
* The FIFO level vs. time graph might look something like:
|
|
*
|
|
* |\___ |\___
|
|
* | \___ | \___
|
|
* | \ | \
|
|
* __ --__--__--__--__--__--__ (- plane active, _ blanking)
|
|
* -> time
|
|
*
|
|
* Returns:
|
|
* The watermark in bytes
|
|
*/
|
|
static unsigned int intel_wm_method2(unsigned int pixel_rate,
|
|
unsigned int htotal,
|
|
unsigned int width,
|
|
unsigned int cpp,
|
|
unsigned int latency)
|
|
{
|
|
unsigned int ret;
|
|
|
|
/*
|
|
* FIXME remove once all users are computing
|
|
* watermarks in the correct place.
|
|
*/
|
|
if (WARN_ON_ONCE(htotal == 0))
|
|
htotal = 1;
|
|
|
|
ret = (latency * pixel_rate) / (htotal * 10000);
|
|
ret = (ret + 1) * width * cpp;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* intel_calculate_wm - calculate watermark level
|
|
* @pixel_rate: pixel clock
|
|
* @wm: chip FIFO params
|
|
* @fifo_size: size of the FIFO buffer
|
|
* @cpp: bytes per pixel
|
|
* @latency_ns: memory latency for the platform
|
|
*
|
|
* Calculate the watermark level (the level at which the display plane will
|
|
* start fetching from memory again). Each chip has a different display
|
|
* FIFO size and allocation, so the caller needs to figure that out and pass
|
|
* in the correct intel_watermark_params structure.
|
|
*
|
|
* As the pixel clock runs, the FIFO will be drained at a rate that depends
|
|
* on the pixel size. When it reaches the watermark level, it'll start
|
|
* fetching FIFO line sized based chunks from memory until the FIFO fills
|
|
* past the watermark point. If the FIFO drains completely, a FIFO underrun
|
|
* will occur, and a display engine hang could result.
|
|
*/
|
|
static unsigned int intel_calculate_wm(int pixel_rate,
|
|
const struct intel_watermark_params *wm,
|
|
int fifo_size, int cpp,
|
|
unsigned int latency_ns)
|
|
{
|
|
int entries, wm_size;
|
|
|
|
/*
|
|
* Note: we need to make sure we don't overflow for various clock &
|
|
* latency values.
|
|
* clocks go from a few thousand to several hundred thousand.
|
|
* latency is usually a few thousand
|
|
*/
|
|
entries = intel_wm_method1(pixel_rate, cpp,
|
|
latency_ns / 100);
|
|
entries = DIV_ROUND_UP(entries, wm->cacheline_size) +
|
|
wm->guard_size;
|
|
DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries);
|
|
|
|
wm_size = fifo_size - entries;
|
|
DRM_DEBUG_KMS("FIFO watermark level: %d\n", wm_size);
|
|
|
|
/* Don't promote wm_size to unsigned... */
|
|
if (wm_size > wm->max_wm)
|
|
wm_size = wm->max_wm;
|
|
if (wm_size <= 0)
|
|
wm_size = wm->default_wm;
|
|
|
|
/*
|
|
* Bspec seems to indicate that the value shouldn't be lower than
|
|
* 'burst size + 1'. Certainly 830 is quite unhappy with low values.
|
|
* Lets go for 8 which is the burst size since certain platforms
|
|
* already use a hardcoded 8 (which is what the spec says should be
|
|
* done).
|
|
*/
|
|
if (wm_size <= 8)
|
|
wm_size = 8;
|
|
|
|
return wm_size;
|
|
}
|
|
|
|
static bool is_disabling(int old, int new, int threshold)
|
|
{
|
|
return old >= threshold && new < threshold;
|
|
}
|
|
|
|
static bool is_enabling(int old, int new, int threshold)
|
|
{
|
|
return old < threshold && new >= threshold;
|
|
}
|
|
|
|
static int intel_wm_num_levels(struct drm_i915_private *dev_priv)
|
|
{
|
|
return dev_priv->wm.max_level + 1;
|
|
}
|
|
|
|
static bool intel_wm_plane_visible(const struct intel_crtc_state *crtc_state,
|
|
const struct intel_plane_state *plane_state)
|
|
{
|
|
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
|
|
|
|
/* FIXME check the 'enable' instead */
|
|
if (!crtc_state->base.active)
|
|
return false;
|
|
|
|
/*
|
|
* Treat cursor with fb as always visible since cursor updates
|
|
* can happen faster than the vrefresh rate, and the current
|
|
* watermark code doesn't handle that correctly. Cursor updates
|
|
* which set/clear the fb or change the cursor size are going
|
|
* to get throttled by intel_legacy_cursor_update() to work
|
|
* around this problem with the watermark code.
|
|
*/
|
|
if (plane->id == PLANE_CURSOR)
|
|
return plane_state->base.fb != NULL;
|
|
else
|
|
return plane_state->base.visible;
|
|
}
|
|
|
|
static struct intel_crtc *single_enabled_crtc(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_crtc *crtc, *enabled = NULL;
|
|
|
|
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
|
if (intel_crtc_active(crtc)) {
|
|
if (enabled)
|
|
return NULL;
|
|
enabled = crtc;
|
|
}
|
|
}
|
|
|
|
return enabled;
|
|
}
|
|
|
|
static void pineview_update_wm(struct intel_crtc *unused_crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
|
|
struct intel_crtc *crtc;
|
|
const struct cxsr_latency *latency;
|
|
u32 reg;
|
|
unsigned int wm;
|
|
|
|
latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev_priv),
|
|
dev_priv->is_ddr3,
|
|
dev_priv->fsb_freq,
|
|
dev_priv->mem_freq);
|
|
if (!latency) {
|
|
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
|
|
intel_set_memory_cxsr(dev_priv, false);
|
|
return;
|
|
}
|
|
|
|
crtc = single_enabled_crtc(dev_priv);
|
|
if (crtc) {
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&crtc->config->base.adjusted_mode;
|
|
const struct drm_framebuffer *fb =
|
|
crtc->base.primary->state->fb;
|
|
int cpp = fb->format->cpp[0];
|
|
int clock = adjusted_mode->crtc_clock;
|
|
|
|
/* Display SR */
|
|
wm = intel_calculate_wm(clock, &pineview_display_wm,
|
|
pineview_display_wm.fifo_size,
|
|
cpp, latency->display_sr);
|
|
reg = I915_READ(DSPFW1);
|
|
reg &= ~DSPFW_SR_MASK;
|
|
reg |= FW_WM(wm, SR);
|
|
I915_WRITE(DSPFW1, reg);
|
|
DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
|
|
|
|
/* cursor SR */
|
|
wm = intel_calculate_wm(clock, &pineview_cursor_wm,
|
|
pineview_display_wm.fifo_size,
|
|
4, latency->cursor_sr);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_CURSOR_SR_MASK;
|
|
reg |= FW_WM(wm, CURSOR_SR);
|
|
I915_WRITE(DSPFW3, reg);
|
|
|
|
/* Display HPLL off SR */
|
|
wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
|
|
pineview_display_hplloff_wm.fifo_size,
|
|
cpp, latency->display_hpll_disable);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_HPLL_SR_MASK;
|
|
reg |= FW_WM(wm, HPLL_SR);
|
|
I915_WRITE(DSPFW3, reg);
|
|
|
|
/* cursor HPLL off SR */
|
|
wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
|
|
pineview_display_hplloff_wm.fifo_size,
|
|
4, latency->cursor_hpll_disable);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_HPLL_CURSOR_MASK;
|
|
reg |= FW_WM(wm, HPLL_CURSOR);
|
|
I915_WRITE(DSPFW3, reg);
|
|
DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
|
|
|
|
intel_set_memory_cxsr(dev_priv, true);
|
|
} else {
|
|
intel_set_memory_cxsr(dev_priv, false);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Documentation says:
|
|
* "If the line size is small, the TLB fetches can get in the way of the
|
|
* data fetches, causing some lag in the pixel data return which is not
|
|
* accounted for in the above formulas. The following adjustment only
|
|
* needs to be applied if eight whole lines fit in the buffer at once.
|
|
* The WM is adjusted upwards by the difference between the FIFO size
|
|
* and the size of 8 whole lines. This adjustment is always performed
|
|
* in the actual pixel depth regardless of whether FBC is enabled or not."
|
|
*/
|
|
static unsigned int g4x_tlb_miss_wa(int fifo_size, int width, int cpp)
|
|
{
|
|
int tlb_miss = fifo_size * 64 - width * cpp * 8;
|
|
|
|
return max(0, tlb_miss);
|
|
}
|
|
|
|
static void g4x_write_wm_values(struct drm_i915_private *dev_priv,
|
|
const struct g4x_wm_values *wm)
|
|
{
|
|
enum pipe pipe;
|
|
|
|
for_each_pipe(dev_priv, pipe)
|
|
trace_g4x_wm(intel_get_crtc_for_pipe(dev_priv, pipe), wm);
|
|
|
|
I915_WRITE(DSPFW1,
|
|
FW_WM(wm->sr.plane, SR) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_CURSOR], CURSORB) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_PRIMARY], PLANEB) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_PRIMARY], PLANEA));
|
|
I915_WRITE(DSPFW2,
|
|
(wm->fbc_en ? DSPFW_FBC_SR_EN : 0) |
|
|
FW_WM(wm->sr.fbc, FBC_SR) |
|
|
FW_WM(wm->hpll.fbc, FBC_HPLL_SR) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE0], SPRITEB) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_CURSOR], CURSORA) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE0], SPRITEA));
|
|
I915_WRITE(DSPFW3,
|
|
(wm->hpll_en ? DSPFW_HPLL_SR_EN : 0) |
|
|
FW_WM(wm->sr.cursor, CURSOR_SR) |
|
|
FW_WM(wm->hpll.cursor, HPLL_CURSOR) |
|
|
FW_WM(wm->hpll.plane, HPLL_SR));
|
|
|
|
POSTING_READ(DSPFW1);
|
|
}
|
|
|
|
#define FW_WM_VLV(value, plane) \
|
|
(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK_VLV)
|
|
|
|
static void vlv_write_wm_values(struct drm_i915_private *dev_priv,
|
|
const struct vlv_wm_values *wm)
|
|
{
|
|
enum pipe pipe;
|
|
|
|
for_each_pipe(dev_priv, pipe) {
|
|
trace_vlv_wm(intel_get_crtc_for_pipe(dev_priv, pipe), wm);
|
|
|
|
I915_WRITE(VLV_DDL(pipe),
|
|
(wm->ddl[pipe].plane[PLANE_CURSOR] << DDL_CURSOR_SHIFT) |
|
|
(wm->ddl[pipe].plane[PLANE_SPRITE1] << DDL_SPRITE_SHIFT(1)) |
|
|
(wm->ddl[pipe].plane[PLANE_SPRITE0] << DDL_SPRITE_SHIFT(0)) |
|
|
(wm->ddl[pipe].plane[PLANE_PRIMARY] << DDL_PLANE_SHIFT));
|
|
}
|
|
|
|
/*
|
|
* Zero the (unused) WM1 watermarks, and also clear all the
|
|
* high order bits so that there are no out of bounds values
|
|
* present in the registers during the reprogramming.
|
|
*/
|
|
I915_WRITE(DSPHOWM, 0);
|
|
I915_WRITE(DSPHOWM1, 0);
|
|
I915_WRITE(DSPFW4, 0);
|
|
I915_WRITE(DSPFW5, 0);
|
|
I915_WRITE(DSPFW6, 0);
|
|
|
|
I915_WRITE(DSPFW1,
|
|
FW_WM(wm->sr.plane, SR) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_CURSOR], CURSORB) |
|
|
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_PRIMARY], PLANEB) |
|
|
FW_WM_VLV(wm->pipe[PIPE_A].plane[PLANE_PRIMARY], PLANEA));
|
|
I915_WRITE(DSPFW2,
|
|
FW_WM_VLV(wm->pipe[PIPE_A].plane[PLANE_SPRITE1], SPRITEB) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_CURSOR], CURSORA) |
|
|
FW_WM_VLV(wm->pipe[PIPE_A].plane[PLANE_SPRITE0], SPRITEA));
|
|
I915_WRITE(DSPFW3,
|
|
FW_WM(wm->sr.cursor, CURSOR_SR));
|
|
|
|
if (IS_CHERRYVIEW(dev_priv)) {
|
|
I915_WRITE(DSPFW7_CHV,
|
|
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_SPRITE1], SPRITED) |
|
|
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_SPRITE0], SPRITEC));
|
|
I915_WRITE(DSPFW8_CHV,
|
|
FW_WM_VLV(wm->pipe[PIPE_C].plane[PLANE_SPRITE1], SPRITEF) |
|
|
FW_WM_VLV(wm->pipe[PIPE_C].plane[PLANE_SPRITE0], SPRITEE));
|
|
I915_WRITE(DSPFW9_CHV,
|
|
FW_WM_VLV(wm->pipe[PIPE_C].plane[PLANE_PRIMARY], PLANEC) |
|
|
FW_WM(wm->pipe[PIPE_C].plane[PLANE_CURSOR], CURSORC));
|
|
I915_WRITE(DSPHOWM,
|
|
FW_WM(wm->sr.plane >> 9, SR_HI) |
|
|
FW_WM(wm->pipe[PIPE_C].plane[PLANE_SPRITE1] >> 8, SPRITEF_HI) |
|
|
FW_WM(wm->pipe[PIPE_C].plane[PLANE_SPRITE0] >> 8, SPRITEE_HI) |
|
|
FW_WM(wm->pipe[PIPE_C].plane[PLANE_PRIMARY] >> 8, PLANEC_HI) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE1] >> 8, SPRITED_HI) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE0] >> 8, SPRITEC_HI) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_PRIMARY] >> 8, PLANEB_HI) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE1] >> 8, SPRITEB_HI) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE0] >> 8, SPRITEA_HI) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_PRIMARY] >> 8, PLANEA_HI));
|
|
} else {
|
|
I915_WRITE(DSPFW7,
|
|
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_SPRITE1], SPRITED) |
|
|
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_SPRITE0], SPRITEC));
|
|
I915_WRITE(DSPHOWM,
|
|
FW_WM(wm->sr.plane >> 9, SR_HI) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE1] >> 8, SPRITED_HI) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE0] >> 8, SPRITEC_HI) |
|
|
FW_WM(wm->pipe[PIPE_B].plane[PLANE_PRIMARY] >> 8, PLANEB_HI) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE1] >> 8, SPRITEB_HI) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE0] >> 8, SPRITEA_HI) |
|
|
FW_WM(wm->pipe[PIPE_A].plane[PLANE_PRIMARY] >> 8, PLANEA_HI));
|
|
}
|
|
|
|
POSTING_READ(DSPFW1);
|
|
}
|
|
|
|
#undef FW_WM_VLV
|
|
|
|
static void g4x_setup_wm_latency(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* all latencies in usec */
|
|
dev_priv->wm.pri_latency[G4X_WM_LEVEL_NORMAL] = 5;
|
|
dev_priv->wm.pri_latency[G4X_WM_LEVEL_SR] = 12;
|
|
dev_priv->wm.pri_latency[G4X_WM_LEVEL_HPLL] = 35;
|
|
|
|
dev_priv->wm.max_level = G4X_WM_LEVEL_HPLL;
|
|
}
|
|
|
|
static int g4x_plane_fifo_size(enum plane_id plane_id, int level)
|
|
{
|
|
/*
|
|
* DSPCNTR[13] supposedly controls whether the
|
|
* primary plane can use the FIFO space otherwise
|
|
* reserved for the sprite plane. It's not 100% clear
|
|
* what the actual FIFO size is, but it looks like we
|
|
* can happily set both primary and sprite watermarks
|
|
* up to 127 cachelines. So that would seem to mean
|
|
* that either DSPCNTR[13] doesn't do anything, or that
|
|
* the total FIFO is >= 256 cachelines in size. Either
|
|
* way, we don't seem to have to worry about this
|
|
* repartitioning as the maximum watermark value the
|
|
* register can hold for each plane is lower than the
|
|
* minimum FIFO size.
|
|
*/
|
|
switch (plane_id) {
|
|
case PLANE_CURSOR:
|
|
return 63;
|
|
case PLANE_PRIMARY:
|
|
return level == G4X_WM_LEVEL_NORMAL ? 127 : 511;
|
|
case PLANE_SPRITE0:
|
|
return level == G4X_WM_LEVEL_NORMAL ? 127 : 0;
|
|
default:
|
|
MISSING_CASE(plane_id);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int g4x_fbc_fifo_size(int level)
|
|
{
|
|
switch (level) {
|
|
case G4X_WM_LEVEL_SR:
|
|
return 7;
|
|
case G4X_WM_LEVEL_HPLL:
|
|
return 15;
|
|
default:
|
|
MISSING_CASE(level);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static uint16_t g4x_compute_wm(const struct intel_crtc_state *crtc_state,
|
|
const struct intel_plane_state *plane_state,
|
|
int level)
|
|
{
|
|
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
|
|
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&crtc_state->base.adjusted_mode;
|
|
unsigned int latency = dev_priv->wm.pri_latency[level] * 10;
|
|
unsigned int clock, htotal, cpp, width, wm;
|
|
|
|
if (latency == 0)
|
|
return USHRT_MAX;
|
|
|
|
if (!intel_wm_plane_visible(crtc_state, plane_state))
|
|
return 0;
|
|
|
|
/*
|
|
* Not 100% sure which way ELK should go here as the
|
|
* spec only says CL/CTG should assume 32bpp and BW
|
|
* doesn't need to. But as these things followed the
|
|
* mobile vs. desktop lines on gen3 as well, let's
|
|
* assume ELK doesn't need this.
|
|
*
|
|
* The spec also fails to list such a restriction for
|
|
* the HPLL watermark, which seems a little strange.
|
|
* Let's use 32bpp for the HPLL watermark as well.
|
|
*/
|
|
if (IS_GM45(dev_priv) && plane->id == PLANE_PRIMARY &&
|
|
level != G4X_WM_LEVEL_NORMAL)
|
|
cpp = 4;
|
|
else
|
|
cpp = plane_state->base.fb->format->cpp[0];
|
|
|
|
clock = adjusted_mode->crtc_clock;
|
|
htotal = adjusted_mode->crtc_htotal;
|
|
|
|
if (plane->id == PLANE_CURSOR)
|
|
width = plane_state->base.crtc_w;
|
|
else
|
|
width = drm_rect_width(&plane_state->base.dst);
|
|
|
|
if (plane->id == PLANE_CURSOR) {
|
|
wm = intel_wm_method2(clock, htotal, width, cpp, latency);
|
|
} else if (plane->id == PLANE_PRIMARY &&
|
|
level == G4X_WM_LEVEL_NORMAL) {
|
|
wm = intel_wm_method1(clock, cpp, latency);
|
|
} else {
|
|
unsigned int small, large;
|
|
|
|
small = intel_wm_method1(clock, cpp, latency);
|
|
large = intel_wm_method2(clock, htotal, width, cpp, latency);
|
|
|
|
wm = min(small, large);
|
|
}
|
|
|
|
wm += g4x_tlb_miss_wa(g4x_plane_fifo_size(plane->id, level),
|
|
width, cpp);
|
|
|
|
wm = DIV_ROUND_UP(wm, 64) + 2;
|
|
|
|
return min_t(unsigned int, wm, USHRT_MAX);
|
|
}
|
|
|
|
static bool g4x_raw_plane_wm_set(struct intel_crtc_state *crtc_state,
|
|
int level, enum plane_id plane_id, u16 value)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
bool dirty = false;
|
|
|
|
for (; level < intel_wm_num_levels(dev_priv); level++) {
|
|
struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
|
|
|
|
dirty |= raw->plane[plane_id] != value;
|
|
raw->plane[plane_id] = value;
|
|
}
|
|
|
|
return dirty;
|
|
}
|
|
|
|
static bool g4x_raw_fbc_wm_set(struct intel_crtc_state *crtc_state,
|
|
int level, u16 value)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
bool dirty = false;
|
|
|
|
/* NORMAL level doesn't have an FBC watermark */
|
|
level = max(level, G4X_WM_LEVEL_SR);
|
|
|
|
for (; level < intel_wm_num_levels(dev_priv); level++) {
|
|
struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
|
|
|
|
dirty |= raw->fbc != value;
|
|
raw->fbc = value;
|
|
}
|
|
|
|
return dirty;
|
|
}
|
|
|
|
static uint32_t ilk_compute_fbc_wm(const struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *pstate,
|
|
uint32_t pri_val);
|
|
|
|
static bool g4x_raw_plane_wm_compute(struct intel_crtc_state *crtc_state,
|
|
const struct intel_plane_state *plane_state)
|
|
{
|
|
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
|
|
int num_levels = intel_wm_num_levels(to_i915(plane->base.dev));
|
|
enum plane_id plane_id = plane->id;
|
|
bool dirty = false;
|
|
int level;
|
|
|
|
if (!intel_wm_plane_visible(crtc_state, plane_state)) {
|
|
dirty |= g4x_raw_plane_wm_set(crtc_state, 0, plane_id, 0);
|
|
if (plane_id == PLANE_PRIMARY)
|
|
dirty |= g4x_raw_fbc_wm_set(crtc_state, 0, 0);
|
|
goto out;
|
|
}
|
|
|
|
for (level = 0; level < num_levels; level++) {
|
|
struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
|
|
int wm, max_wm;
|
|
|
|
wm = g4x_compute_wm(crtc_state, plane_state, level);
|
|
max_wm = g4x_plane_fifo_size(plane_id, level);
|
|
|
|
if (wm > max_wm)
|
|
break;
|
|
|
|
dirty |= raw->plane[plane_id] != wm;
|
|
raw->plane[plane_id] = wm;
|
|
|
|
if (plane_id != PLANE_PRIMARY ||
|
|
level == G4X_WM_LEVEL_NORMAL)
|
|
continue;
|
|
|
|
wm = ilk_compute_fbc_wm(crtc_state, plane_state,
|
|
raw->plane[plane_id]);
|
|
max_wm = g4x_fbc_fifo_size(level);
|
|
|
|
/*
|
|
* FBC wm is not mandatory as we
|
|
* can always just disable its use.
|
|
*/
|
|
if (wm > max_wm)
|
|
wm = USHRT_MAX;
|
|
|
|
dirty |= raw->fbc != wm;
|
|
raw->fbc = wm;
|
|
}
|
|
|
|
/* mark watermarks as invalid */
|
|
dirty |= g4x_raw_plane_wm_set(crtc_state, level, plane_id, USHRT_MAX);
|
|
|
|
if (plane_id == PLANE_PRIMARY)
|
|
dirty |= g4x_raw_fbc_wm_set(crtc_state, level, USHRT_MAX);
|
|
|
|
out:
|
|
if (dirty) {
|
|
DRM_DEBUG_KMS("%s watermarks: normal=%d, SR=%d, HPLL=%d\n",
|
|
plane->base.name,
|
|
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_NORMAL].plane[plane_id],
|
|
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_SR].plane[plane_id],
|
|
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_HPLL].plane[plane_id]);
|
|
|
|
if (plane_id == PLANE_PRIMARY)
|
|
DRM_DEBUG_KMS("FBC watermarks: SR=%d, HPLL=%d\n",
|
|
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_SR].fbc,
|
|
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_HPLL].fbc);
|
|
}
|
|
|
|
return dirty;
|
|
}
|
|
|
|
static bool g4x_raw_plane_wm_is_valid(const struct intel_crtc_state *crtc_state,
|
|
enum plane_id plane_id, int level)
|
|
{
|
|
const struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
|
|
|
|
return raw->plane[plane_id] <= g4x_plane_fifo_size(plane_id, level);
|
|
}
|
|
|
|
static bool g4x_raw_crtc_wm_is_valid(const struct intel_crtc_state *crtc_state,
|
|
int level)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
|
|
if (level > dev_priv->wm.max_level)
|
|
return false;
|
|
|
|
return g4x_raw_plane_wm_is_valid(crtc_state, PLANE_PRIMARY, level) &&
|
|
g4x_raw_plane_wm_is_valid(crtc_state, PLANE_SPRITE0, level) &&
|
|
g4x_raw_plane_wm_is_valid(crtc_state, PLANE_CURSOR, level);
|
|
}
|
|
|
|
/* mark all levels starting from 'level' as invalid */
|
|
static void g4x_invalidate_wms(struct intel_crtc *crtc,
|
|
struct g4x_wm_state *wm_state, int level)
|
|
{
|
|
if (level <= G4X_WM_LEVEL_NORMAL) {
|
|
enum plane_id plane_id;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id)
|
|
wm_state->wm.plane[plane_id] = USHRT_MAX;
|
|
}
|
|
|
|
if (level <= G4X_WM_LEVEL_SR) {
|
|
wm_state->cxsr = false;
|
|
wm_state->sr.cursor = USHRT_MAX;
|
|
wm_state->sr.plane = USHRT_MAX;
|
|
wm_state->sr.fbc = USHRT_MAX;
|
|
}
|
|
|
|
if (level <= G4X_WM_LEVEL_HPLL) {
|
|
wm_state->hpll_en = false;
|
|
wm_state->hpll.cursor = USHRT_MAX;
|
|
wm_state->hpll.plane = USHRT_MAX;
|
|
wm_state->hpll.fbc = USHRT_MAX;
|
|
}
|
|
}
|
|
|
|
static int g4x_compute_pipe_wm(struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct intel_atomic_state *state =
|
|
to_intel_atomic_state(crtc_state->base.state);
|
|
struct g4x_wm_state *wm_state = &crtc_state->wm.g4x.optimal;
|
|
int num_active_planes = hweight32(crtc_state->active_planes &
|
|
~BIT(PLANE_CURSOR));
|
|
const struct g4x_pipe_wm *raw;
|
|
const struct intel_plane_state *old_plane_state;
|
|
const struct intel_plane_state *new_plane_state;
|
|
struct intel_plane *plane;
|
|
enum plane_id plane_id;
|
|
int i, level;
|
|
unsigned int dirty = 0;
|
|
|
|
for_each_oldnew_intel_plane_in_state(state, plane,
|
|
old_plane_state,
|
|
new_plane_state, i) {
|
|
if (new_plane_state->base.crtc != &crtc->base &&
|
|
old_plane_state->base.crtc != &crtc->base)
|
|
continue;
|
|
|
|
if (g4x_raw_plane_wm_compute(crtc_state, new_plane_state))
|
|
dirty |= BIT(plane->id);
|
|
}
|
|
|
|
if (!dirty)
|
|
return 0;
|
|
|
|
level = G4X_WM_LEVEL_NORMAL;
|
|
if (!g4x_raw_crtc_wm_is_valid(crtc_state, level))
|
|
goto out;
|
|
|
|
raw = &crtc_state->wm.g4x.raw[level];
|
|
for_each_plane_id_on_crtc(crtc, plane_id)
|
|
wm_state->wm.plane[plane_id] = raw->plane[plane_id];
|
|
|
|
level = G4X_WM_LEVEL_SR;
|
|
|
|
if (!g4x_raw_crtc_wm_is_valid(crtc_state, level))
|
|
goto out;
|
|
|
|
raw = &crtc_state->wm.g4x.raw[level];
|
|
wm_state->sr.plane = raw->plane[PLANE_PRIMARY];
|
|
wm_state->sr.cursor = raw->plane[PLANE_CURSOR];
|
|
wm_state->sr.fbc = raw->fbc;
|
|
|
|
wm_state->cxsr = num_active_planes == BIT(PLANE_PRIMARY);
|
|
|
|
level = G4X_WM_LEVEL_HPLL;
|
|
|
|
if (!g4x_raw_crtc_wm_is_valid(crtc_state, level))
|
|
goto out;
|
|
|
|
raw = &crtc_state->wm.g4x.raw[level];
|
|
wm_state->hpll.plane = raw->plane[PLANE_PRIMARY];
|
|
wm_state->hpll.cursor = raw->plane[PLANE_CURSOR];
|
|
wm_state->hpll.fbc = raw->fbc;
|
|
|
|
wm_state->hpll_en = wm_state->cxsr;
|
|
|
|
level++;
|
|
|
|
out:
|
|
if (level == G4X_WM_LEVEL_NORMAL)
|
|
return -EINVAL;
|
|
|
|
/* invalidate the higher levels */
|
|
g4x_invalidate_wms(crtc, wm_state, level);
|
|
|
|
/*
|
|
* Determine if the FBC watermark(s) can be used. IF
|
|
* this isn't the case we prefer to disable the FBC
|
|
( watermark(s) rather than disable the SR/HPLL
|
|
* level(s) entirely.
|
|
*/
|
|
wm_state->fbc_en = level > G4X_WM_LEVEL_NORMAL;
|
|
|
|
if (level >= G4X_WM_LEVEL_SR &&
|
|
wm_state->sr.fbc > g4x_fbc_fifo_size(G4X_WM_LEVEL_SR))
|
|
wm_state->fbc_en = false;
|
|
else if (level >= G4X_WM_LEVEL_HPLL &&
|
|
wm_state->hpll.fbc > g4x_fbc_fifo_size(G4X_WM_LEVEL_HPLL))
|
|
wm_state->fbc_en = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int g4x_compute_intermediate_wm(struct drm_device *dev,
|
|
struct intel_crtc *crtc,
|
|
struct intel_crtc_state *new_crtc_state)
|
|
{
|
|
struct g4x_wm_state *intermediate = &new_crtc_state->wm.g4x.intermediate;
|
|
const struct g4x_wm_state *optimal = &new_crtc_state->wm.g4x.optimal;
|
|
struct intel_atomic_state *intel_state =
|
|
to_intel_atomic_state(new_crtc_state->base.state);
|
|
const struct intel_crtc_state *old_crtc_state =
|
|
intel_atomic_get_old_crtc_state(intel_state, crtc);
|
|
const struct g4x_wm_state *active = &old_crtc_state->wm.g4x.optimal;
|
|
enum plane_id plane_id;
|
|
|
|
if (!new_crtc_state->base.active || drm_atomic_crtc_needs_modeset(&new_crtc_state->base)) {
|
|
*intermediate = *optimal;
|
|
|
|
intermediate->cxsr = false;
|
|
intermediate->hpll_en = false;
|
|
goto out;
|
|
}
|
|
|
|
intermediate->cxsr = optimal->cxsr && active->cxsr &&
|
|
!new_crtc_state->disable_cxsr;
|
|
intermediate->hpll_en = optimal->hpll_en && active->hpll_en &&
|
|
!new_crtc_state->disable_cxsr;
|
|
intermediate->fbc_en = optimal->fbc_en && active->fbc_en;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id) {
|
|
intermediate->wm.plane[plane_id] =
|
|
max(optimal->wm.plane[plane_id],
|
|
active->wm.plane[plane_id]);
|
|
|
|
WARN_ON(intermediate->wm.plane[plane_id] >
|
|
g4x_plane_fifo_size(plane_id, G4X_WM_LEVEL_NORMAL));
|
|
}
|
|
|
|
intermediate->sr.plane = max(optimal->sr.plane,
|
|
active->sr.plane);
|
|
intermediate->sr.cursor = max(optimal->sr.cursor,
|
|
active->sr.cursor);
|
|
intermediate->sr.fbc = max(optimal->sr.fbc,
|
|
active->sr.fbc);
|
|
|
|
intermediate->hpll.plane = max(optimal->hpll.plane,
|
|
active->hpll.plane);
|
|
intermediate->hpll.cursor = max(optimal->hpll.cursor,
|
|
active->hpll.cursor);
|
|
intermediate->hpll.fbc = max(optimal->hpll.fbc,
|
|
active->hpll.fbc);
|
|
|
|
WARN_ON((intermediate->sr.plane >
|
|
g4x_plane_fifo_size(PLANE_PRIMARY, G4X_WM_LEVEL_SR) ||
|
|
intermediate->sr.cursor >
|
|
g4x_plane_fifo_size(PLANE_CURSOR, G4X_WM_LEVEL_SR)) &&
|
|
intermediate->cxsr);
|
|
WARN_ON((intermediate->sr.plane >
|
|
g4x_plane_fifo_size(PLANE_PRIMARY, G4X_WM_LEVEL_HPLL) ||
|
|
intermediate->sr.cursor >
|
|
g4x_plane_fifo_size(PLANE_CURSOR, G4X_WM_LEVEL_HPLL)) &&
|
|
intermediate->hpll_en);
|
|
|
|
WARN_ON(intermediate->sr.fbc > g4x_fbc_fifo_size(1) &&
|
|
intermediate->fbc_en && intermediate->cxsr);
|
|
WARN_ON(intermediate->hpll.fbc > g4x_fbc_fifo_size(2) &&
|
|
intermediate->fbc_en && intermediate->hpll_en);
|
|
|
|
out:
|
|
/*
|
|
* If our intermediate WM are identical to the final WM, then we can
|
|
* omit the post-vblank programming; only update if it's different.
|
|
*/
|
|
if (memcmp(intermediate, optimal, sizeof(*intermediate)) != 0)
|
|
new_crtc_state->wm.need_postvbl_update = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void g4x_merge_wm(struct drm_i915_private *dev_priv,
|
|
struct g4x_wm_values *wm)
|
|
{
|
|
struct intel_crtc *crtc;
|
|
int num_active_crtcs = 0;
|
|
|
|
wm->cxsr = true;
|
|
wm->hpll_en = true;
|
|
wm->fbc_en = true;
|
|
|
|
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
|
const struct g4x_wm_state *wm_state = &crtc->wm.active.g4x;
|
|
|
|
if (!crtc->active)
|
|
continue;
|
|
|
|
if (!wm_state->cxsr)
|
|
wm->cxsr = false;
|
|
if (!wm_state->hpll_en)
|
|
wm->hpll_en = false;
|
|
if (!wm_state->fbc_en)
|
|
wm->fbc_en = false;
|
|
|
|
num_active_crtcs++;
|
|
}
|
|
|
|
if (num_active_crtcs != 1) {
|
|
wm->cxsr = false;
|
|
wm->hpll_en = false;
|
|
wm->fbc_en = false;
|
|
}
|
|
|
|
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
|
const struct g4x_wm_state *wm_state = &crtc->wm.active.g4x;
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
wm->pipe[pipe] = wm_state->wm;
|
|
if (crtc->active && wm->cxsr)
|
|
wm->sr = wm_state->sr;
|
|
if (crtc->active && wm->hpll_en)
|
|
wm->hpll = wm_state->hpll;
|
|
}
|
|
}
|
|
|
|
static void g4x_program_watermarks(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct g4x_wm_values *old_wm = &dev_priv->wm.g4x;
|
|
struct g4x_wm_values new_wm = {};
|
|
|
|
g4x_merge_wm(dev_priv, &new_wm);
|
|
|
|
if (memcmp(old_wm, &new_wm, sizeof(new_wm)) == 0)
|
|
return;
|
|
|
|
if (is_disabling(old_wm->cxsr, new_wm.cxsr, true))
|
|
_intel_set_memory_cxsr(dev_priv, false);
|
|
|
|
g4x_write_wm_values(dev_priv, &new_wm);
|
|
|
|
if (is_enabling(old_wm->cxsr, new_wm.cxsr, true))
|
|
_intel_set_memory_cxsr(dev_priv, true);
|
|
|
|
*old_wm = new_wm;
|
|
}
|
|
|
|
static void g4x_initial_watermarks(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
crtc->wm.active.g4x = crtc_state->wm.g4x.intermediate;
|
|
g4x_program_watermarks(dev_priv);
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
static void g4x_optimize_watermarks(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
|
|
if (!crtc_state->wm.need_postvbl_update)
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
intel_crtc->wm.active.g4x = crtc_state->wm.g4x.optimal;
|
|
g4x_program_watermarks(dev_priv);
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
/* latency must be in 0.1us units. */
|
|
static unsigned int vlv_wm_method2(unsigned int pixel_rate,
|
|
unsigned int htotal,
|
|
unsigned int width,
|
|
unsigned int cpp,
|
|
unsigned int latency)
|
|
{
|
|
unsigned int ret;
|
|
|
|
ret = intel_wm_method2(pixel_rate, htotal,
|
|
width, cpp, latency);
|
|
ret = DIV_ROUND_UP(ret, 64);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void vlv_setup_wm_latency(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* all latencies in usec */
|
|
dev_priv->wm.pri_latency[VLV_WM_LEVEL_PM2] = 3;
|
|
|
|
dev_priv->wm.max_level = VLV_WM_LEVEL_PM2;
|
|
|
|
if (IS_CHERRYVIEW(dev_priv)) {
|
|
dev_priv->wm.pri_latency[VLV_WM_LEVEL_PM5] = 12;
|
|
dev_priv->wm.pri_latency[VLV_WM_LEVEL_DDR_DVFS] = 33;
|
|
|
|
dev_priv->wm.max_level = VLV_WM_LEVEL_DDR_DVFS;
|
|
}
|
|
}
|
|
|
|
static uint16_t vlv_compute_wm_level(const struct intel_crtc_state *crtc_state,
|
|
const struct intel_plane_state *plane_state,
|
|
int level)
|
|
{
|
|
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
|
|
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&crtc_state->base.adjusted_mode;
|
|
unsigned int clock, htotal, cpp, width, wm;
|
|
|
|
if (dev_priv->wm.pri_latency[level] == 0)
|
|
return USHRT_MAX;
|
|
|
|
if (!intel_wm_plane_visible(crtc_state, plane_state))
|
|
return 0;
|
|
|
|
cpp = plane_state->base.fb->format->cpp[0];
|
|
clock = adjusted_mode->crtc_clock;
|
|
htotal = adjusted_mode->crtc_htotal;
|
|
width = crtc_state->pipe_src_w;
|
|
|
|
if (plane->id == PLANE_CURSOR) {
|
|
/*
|
|
* FIXME the formula gives values that are
|
|
* too big for the cursor FIFO, and hence we
|
|
* would never be able to use cursors. For
|
|
* now just hardcode the watermark.
|
|
*/
|
|
wm = 63;
|
|
} else {
|
|
wm = vlv_wm_method2(clock, htotal, width, cpp,
|
|
dev_priv->wm.pri_latency[level] * 10);
|
|
}
|
|
|
|
return min_t(unsigned int, wm, USHRT_MAX);
|
|
}
|
|
|
|
static bool vlv_need_sprite0_fifo_workaround(unsigned int active_planes)
|
|
{
|
|
return (active_planes & (BIT(PLANE_SPRITE0) |
|
|
BIT(PLANE_SPRITE1))) == BIT(PLANE_SPRITE1);
|
|
}
|
|
|
|
static int vlv_compute_fifo(struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
const struct g4x_pipe_wm *raw =
|
|
&crtc_state->wm.vlv.raw[VLV_WM_LEVEL_PM2];
|
|
struct vlv_fifo_state *fifo_state = &crtc_state->wm.vlv.fifo_state;
|
|
unsigned int active_planes = crtc_state->active_planes & ~BIT(PLANE_CURSOR);
|
|
int num_active_planes = hweight32(active_planes);
|
|
const int fifo_size = 511;
|
|
int fifo_extra, fifo_left = fifo_size;
|
|
int sprite0_fifo_extra = 0;
|
|
unsigned int total_rate;
|
|
enum plane_id plane_id;
|
|
|
|
/*
|
|
* When enabling sprite0 after sprite1 has already been enabled
|
|
* we tend to get an underrun unless sprite0 already has some
|
|
* FIFO space allcoated. Hence we always allocate at least one
|
|
* cacheline for sprite0 whenever sprite1 is enabled.
|
|
*
|
|
* All other plane enable sequences appear immune to this problem.
|
|
*/
|
|
if (vlv_need_sprite0_fifo_workaround(active_planes))
|
|
sprite0_fifo_extra = 1;
|
|
|
|
total_rate = raw->plane[PLANE_PRIMARY] +
|
|
raw->plane[PLANE_SPRITE0] +
|
|
raw->plane[PLANE_SPRITE1] +
|
|
sprite0_fifo_extra;
|
|
|
|
if (total_rate > fifo_size)
|
|
return -EINVAL;
|
|
|
|
if (total_rate == 0)
|
|
total_rate = 1;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id) {
|
|
unsigned int rate;
|
|
|
|
if ((active_planes & BIT(plane_id)) == 0) {
|
|
fifo_state->plane[plane_id] = 0;
|
|
continue;
|
|
}
|
|
|
|
rate = raw->plane[plane_id];
|
|
fifo_state->plane[plane_id] = fifo_size * rate / total_rate;
|
|
fifo_left -= fifo_state->plane[plane_id];
|
|
}
|
|
|
|
fifo_state->plane[PLANE_SPRITE0] += sprite0_fifo_extra;
|
|
fifo_left -= sprite0_fifo_extra;
|
|
|
|
fifo_state->plane[PLANE_CURSOR] = 63;
|
|
|
|
fifo_extra = DIV_ROUND_UP(fifo_left, num_active_planes ?: 1);
|
|
|
|
/* spread the remainder evenly */
|
|
for_each_plane_id_on_crtc(crtc, plane_id) {
|
|
int plane_extra;
|
|
|
|
if (fifo_left == 0)
|
|
break;
|
|
|
|
if ((active_planes & BIT(plane_id)) == 0)
|
|
continue;
|
|
|
|
plane_extra = min(fifo_extra, fifo_left);
|
|
fifo_state->plane[plane_id] += plane_extra;
|
|
fifo_left -= plane_extra;
|
|
}
|
|
|
|
WARN_ON(active_planes != 0 && fifo_left != 0);
|
|
|
|
/* give it all to the first plane if none are active */
|
|
if (active_planes == 0) {
|
|
WARN_ON(fifo_left != fifo_size);
|
|
fifo_state->plane[PLANE_PRIMARY] = fifo_left;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* mark all levels starting from 'level' as invalid */
|
|
static void vlv_invalidate_wms(struct intel_crtc *crtc,
|
|
struct vlv_wm_state *wm_state, int level)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
|
|
for (; level < intel_wm_num_levels(dev_priv); level++) {
|
|
enum plane_id plane_id;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id)
|
|
wm_state->wm[level].plane[plane_id] = USHRT_MAX;
|
|
|
|
wm_state->sr[level].cursor = USHRT_MAX;
|
|
wm_state->sr[level].plane = USHRT_MAX;
|
|
}
|
|
}
|
|
|
|
static u16 vlv_invert_wm_value(u16 wm, u16 fifo_size)
|
|
{
|
|
if (wm > fifo_size)
|
|
return USHRT_MAX;
|
|
else
|
|
return fifo_size - wm;
|
|
}
|
|
|
|
/*
|
|
* Starting from 'level' set all higher
|
|
* levels to 'value' in the "raw" watermarks.
|
|
*/
|
|
static bool vlv_raw_plane_wm_set(struct intel_crtc_state *crtc_state,
|
|
int level, enum plane_id plane_id, u16 value)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
int num_levels = intel_wm_num_levels(dev_priv);
|
|
bool dirty = false;
|
|
|
|
for (; level < num_levels; level++) {
|
|
struct g4x_pipe_wm *raw = &crtc_state->wm.vlv.raw[level];
|
|
|
|
dirty |= raw->plane[plane_id] != value;
|
|
raw->plane[plane_id] = value;
|
|
}
|
|
|
|
return dirty;
|
|
}
|
|
|
|
static bool vlv_raw_plane_wm_compute(struct intel_crtc_state *crtc_state,
|
|
const struct intel_plane_state *plane_state)
|
|
{
|
|
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
|
|
enum plane_id plane_id = plane->id;
|
|
int num_levels = intel_wm_num_levels(to_i915(plane->base.dev));
|
|
int level;
|
|
bool dirty = false;
|
|
|
|
if (!intel_wm_plane_visible(crtc_state, plane_state)) {
|
|
dirty |= vlv_raw_plane_wm_set(crtc_state, 0, plane_id, 0);
|
|
goto out;
|
|
}
|
|
|
|
for (level = 0; level < num_levels; level++) {
|
|
struct g4x_pipe_wm *raw = &crtc_state->wm.vlv.raw[level];
|
|
int wm = vlv_compute_wm_level(crtc_state, plane_state, level);
|
|
int max_wm = plane_id == PLANE_CURSOR ? 63 : 511;
|
|
|
|
if (wm > max_wm)
|
|
break;
|
|
|
|
dirty |= raw->plane[plane_id] != wm;
|
|
raw->plane[plane_id] = wm;
|
|
}
|
|
|
|
/* mark all higher levels as invalid */
|
|
dirty |= vlv_raw_plane_wm_set(crtc_state, level, plane_id, USHRT_MAX);
|
|
|
|
out:
|
|
if (dirty)
|
|
DRM_DEBUG_KMS("%s watermarks: PM2=%d, PM5=%d, DDR DVFS=%d\n",
|
|
plane->base.name,
|
|
crtc_state->wm.vlv.raw[VLV_WM_LEVEL_PM2].plane[plane_id],
|
|
crtc_state->wm.vlv.raw[VLV_WM_LEVEL_PM5].plane[plane_id],
|
|
crtc_state->wm.vlv.raw[VLV_WM_LEVEL_DDR_DVFS].plane[plane_id]);
|
|
|
|
return dirty;
|
|
}
|
|
|
|
static bool vlv_raw_plane_wm_is_valid(const struct intel_crtc_state *crtc_state,
|
|
enum plane_id plane_id, int level)
|
|
{
|
|
const struct g4x_pipe_wm *raw =
|
|
&crtc_state->wm.vlv.raw[level];
|
|
const struct vlv_fifo_state *fifo_state =
|
|
&crtc_state->wm.vlv.fifo_state;
|
|
|
|
return raw->plane[plane_id] <= fifo_state->plane[plane_id];
|
|
}
|
|
|
|
static bool vlv_raw_crtc_wm_is_valid(const struct intel_crtc_state *crtc_state, int level)
|
|
{
|
|
return vlv_raw_plane_wm_is_valid(crtc_state, PLANE_PRIMARY, level) &&
|
|
vlv_raw_plane_wm_is_valid(crtc_state, PLANE_SPRITE0, level) &&
|
|
vlv_raw_plane_wm_is_valid(crtc_state, PLANE_SPRITE1, level) &&
|
|
vlv_raw_plane_wm_is_valid(crtc_state, PLANE_CURSOR, level);
|
|
}
|
|
|
|
static int vlv_compute_pipe_wm(struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
struct intel_atomic_state *state =
|
|
to_intel_atomic_state(crtc_state->base.state);
|
|
struct vlv_wm_state *wm_state = &crtc_state->wm.vlv.optimal;
|
|
const struct vlv_fifo_state *fifo_state =
|
|
&crtc_state->wm.vlv.fifo_state;
|
|
int num_active_planes = hweight32(crtc_state->active_planes &
|
|
~BIT(PLANE_CURSOR));
|
|
bool needs_modeset = drm_atomic_crtc_needs_modeset(&crtc_state->base);
|
|
const struct intel_plane_state *old_plane_state;
|
|
const struct intel_plane_state *new_plane_state;
|
|
struct intel_plane *plane;
|
|
enum plane_id plane_id;
|
|
int level, ret, i;
|
|
unsigned int dirty = 0;
|
|
|
|
for_each_oldnew_intel_plane_in_state(state, plane,
|
|
old_plane_state,
|
|
new_plane_state, i) {
|
|
if (new_plane_state->base.crtc != &crtc->base &&
|
|
old_plane_state->base.crtc != &crtc->base)
|
|
continue;
|
|
|
|
if (vlv_raw_plane_wm_compute(crtc_state, new_plane_state))
|
|
dirty |= BIT(plane->id);
|
|
}
|
|
|
|
/*
|
|
* DSPARB registers may have been reset due to the
|
|
* power well being turned off. Make sure we restore
|
|
* them to a consistent state even if no primary/sprite
|
|
* planes are initially active.
|
|
*/
|
|
if (needs_modeset)
|
|
crtc_state->fifo_changed = true;
|
|
|
|
if (!dirty)
|
|
return 0;
|
|
|
|
/* cursor changes don't warrant a FIFO recompute */
|
|
if (dirty & ~BIT(PLANE_CURSOR)) {
|
|
const struct intel_crtc_state *old_crtc_state =
|
|
intel_atomic_get_old_crtc_state(state, crtc);
|
|
const struct vlv_fifo_state *old_fifo_state =
|
|
&old_crtc_state->wm.vlv.fifo_state;
|
|
|
|
ret = vlv_compute_fifo(crtc_state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (needs_modeset ||
|
|
memcmp(old_fifo_state, fifo_state,
|
|
sizeof(*fifo_state)) != 0)
|
|
crtc_state->fifo_changed = true;
|
|
}
|
|
|
|
/* initially allow all levels */
|
|
wm_state->num_levels = intel_wm_num_levels(dev_priv);
|
|
/*
|
|
* Note that enabling cxsr with no primary/sprite planes
|
|
* enabled can wedge the pipe. Hence we only allow cxsr
|
|
* with exactly one enabled primary/sprite plane.
|
|
*/
|
|
wm_state->cxsr = crtc->pipe != PIPE_C && num_active_planes == 1;
|
|
|
|
for (level = 0; level < wm_state->num_levels; level++) {
|
|
const struct g4x_pipe_wm *raw = &crtc_state->wm.vlv.raw[level];
|
|
const int sr_fifo_size = INTEL_INFO(dev_priv)->num_pipes * 512 - 1;
|
|
|
|
if (!vlv_raw_crtc_wm_is_valid(crtc_state, level))
|
|
break;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id) {
|
|
wm_state->wm[level].plane[plane_id] =
|
|
vlv_invert_wm_value(raw->plane[plane_id],
|
|
fifo_state->plane[plane_id]);
|
|
}
|
|
|
|
wm_state->sr[level].plane =
|
|
vlv_invert_wm_value(max3(raw->plane[PLANE_PRIMARY],
|
|
raw->plane[PLANE_SPRITE0],
|
|
raw->plane[PLANE_SPRITE1]),
|
|
sr_fifo_size);
|
|
|
|
wm_state->sr[level].cursor =
|
|
vlv_invert_wm_value(raw->plane[PLANE_CURSOR],
|
|
63);
|
|
}
|
|
|
|
if (level == 0)
|
|
return -EINVAL;
|
|
|
|
/* limit to only levels we can actually handle */
|
|
wm_state->num_levels = level;
|
|
|
|
/* invalidate the higher levels */
|
|
vlv_invalidate_wms(crtc, wm_state, level);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define VLV_FIFO(plane, value) \
|
|
(((value) << DSPARB_ ## plane ## _SHIFT_VLV) & DSPARB_ ## plane ## _MASK_VLV)
|
|
|
|
static void vlv_atomic_update_fifo(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
const struct vlv_fifo_state *fifo_state =
|
|
&crtc_state->wm.vlv.fifo_state;
|
|
int sprite0_start, sprite1_start, fifo_size;
|
|
|
|
if (!crtc_state->fifo_changed)
|
|
return;
|
|
|
|
sprite0_start = fifo_state->plane[PLANE_PRIMARY];
|
|
sprite1_start = fifo_state->plane[PLANE_SPRITE0] + sprite0_start;
|
|
fifo_size = fifo_state->plane[PLANE_SPRITE1] + sprite1_start;
|
|
|
|
WARN_ON(fifo_state->plane[PLANE_CURSOR] != 63);
|
|
WARN_ON(fifo_size != 511);
|
|
|
|
trace_vlv_fifo_size(crtc, sprite0_start, sprite1_start, fifo_size);
|
|
|
|
/*
|
|
* uncore.lock serves a double purpose here. It allows us to
|
|
* use the less expensive I915_{READ,WRITE}_FW() functions, and
|
|
* it protects the DSPARB registers from getting clobbered by
|
|
* parallel updates from multiple pipes.
|
|
*
|
|
* intel_pipe_update_start() has already disabled interrupts
|
|
* for us, so a plain spin_lock() is sufficient here.
|
|
*/
|
|
spin_lock(&dev_priv->uncore.lock);
|
|
|
|
switch (crtc->pipe) {
|
|
uint32_t dsparb, dsparb2, dsparb3;
|
|
case PIPE_A:
|
|
dsparb = I915_READ_FW(DSPARB);
|
|
dsparb2 = I915_READ_FW(DSPARB2);
|
|
|
|
dsparb &= ~(VLV_FIFO(SPRITEA, 0xff) |
|
|
VLV_FIFO(SPRITEB, 0xff));
|
|
dsparb |= (VLV_FIFO(SPRITEA, sprite0_start) |
|
|
VLV_FIFO(SPRITEB, sprite1_start));
|
|
|
|
dsparb2 &= ~(VLV_FIFO(SPRITEA_HI, 0x1) |
|
|
VLV_FIFO(SPRITEB_HI, 0x1));
|
|
dsparb2 |= (VLV_FIFO(SPRITEA_HI, sprite0_start >> 8) |
|
|
VLV_FIFO(SPRITEB_HI, sprite1_start >> 8));
|
|
|
|
I915_WRITE_FW(DSPARB, dsparb);
|
|
I915_WRITE_FW(DSPARB2, dsparb2);
|
|
break;
|
|
case PIPE_B:
|
|
dsparb = I915_READ_FW(DSPARB);
|
|
dsparb2 = I915_READ_FW(DSPARB2);
|
|
|
|
dsparb &= ~(VLV_FIFO(SPRITEC, 0xff) |
|
|
VLV_FIFO(SPRITED, 0xff));
|
|
dsparb |= (VLV_FIFO(SPRITEC, sprite0_start) |
|
|
VLV_FIFO(SPRITED, sprite1_start));
|
|
|
|
dsparb2 &= ~(VLV_FIFO(SPRITEC_HI, 0xff) |
|
|
VLV_FIFO(SPRITED_HI, 0xff));
|
|
dsparb2 |= (VLV_FIFO(SPRITEC_HI, sprite0_start >> 8) |
|
|
VLV_FIFO(SPRITED_HI, sprite1_start >> 8));
|
|
|
|
I915_WRITE_FW(DSPARB, dsparb);
|
|
I915_WRITE_FW(DSPARB2, dsparb2);
|
|
break;
|
|
case PIPE_C:
|
|
dsparb3 = I915_READ_FW(DSPARB3);
|
|
dsparb2 = I915_READ_FW(DSPARB2);
|
|
|
|
dsparb3 &= ~(VLV_FIFO(SPRITEE, 0xff) |
|
|
VLV_FIFO(SPRITEF, 0xff));
|
|
dsparb3 |= (VLV_FIFO(SPRITEE, sprite0_start) |
|
|
VLV_FIFO(SPRITEF, sprite1_start));
|
|
|
|
dsparb2 &= ~(VLV_FIFO(SPRITEE_HI, 0xff) |
|
|
VLV_FIFO(SPRITEF_HI, 0xff));
|
|
dsparb2 |= (VLV_FIFO(SPRITEE_HI, sprite0_start >> 8) |
|
|
VLV_FIFO(SPRITEF_HI, sprite1_start >> 8));
|
|
|
|
I915_WRITE_FW(DSPARB3, dsparb3);
|
|
I915_WRITE_FW(DSPARB2, dsparb2);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
POSTING_READ_FW(DSPARB);
|
|
|
|
spin_unlock(&dev_priv->uncore.lock);
|
|
}
|
|
|
|
#undef VLV_FIFO
|
|
|
|
static int vlv_compute_intermediate_wm(struct drm_device *dev,
|
|
struct intel_crtc *crtc,
|
|
struct intel_crtc_state *new_crtc_state)
|
|
{
|
|
struct vlv_wm_state *intermediate = &new_crtc_state->wm.vlv.intermediate;
|
|
const struct vlv_wm_state *optimal = &new_crtc_state->wm.vlv.optimal;
|
|
struct intel_atomic_state *intel_state =
|
|
to_intel_atomic_state(new_crtc_state->base.state);
|
|
const struct intel_crtc_state *old_crtc_state =
|
|
intel_atomic_get_old_crtc_state(intel_state, crtc);
|
|
const struct vlv_wm_state *active = &old_crtc_state->wm.vlv.optimal;
|
|
int level;
|
|
|
|
if (!new_crtc_state->base.active || drm_atomic_crtc_needs_modeset(&new_crtc_state->base)) {
|
|
*intermediate = *optimal;
|
|
|
|
intermediate->cxsr = false;
|
|
goto out;
|
|
}
|
|
|
|
intermediate->num_levels = min(optimal->num_levels, active->num_levels);
|
|
intermediate->cxsr = optimal->cxsr && active->cxsr &&
|
|
!new_crtc_state->disable_cxsr;
|
|
|
|
for (level = 0; level < intermediate->num_levels; level++) {
|
|
enum plane_id plane_id;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id) {
|
|
intermediate->wm[level].plane[plane_id] =
|
|
min(optimal->wm[level].plane[plane_id],
|
|
active->wm[level].plane[plane_id]);
|
|
}
|
|
|
|
intermediate->sr[level].plane = min(optimal->sr[level].plane,
|
|
active->sr[level].plane);
|
|
intermediate->sr[level].cursor = min(optimal->sr[level].cursor,
|
|
active->sr[level].cursor);
|
|
}
|
|
|
|
vlv_invalidate_wms(crtc, intermediate, level);
|
|
|
|
out:
|
|
/*
|
|
* If our intermediate WM are identical to the final WM, then we can
|
|
* omit the post-vblank programming; only update if it's different.
|
|
*/
|
|
if (memcmp(intermediate, optimal, sizeof(*intermediate)) != 0)
|
|
new_crtc_state->wm.need_postvbl_update = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vlv_merge_wm(struct drm_i915_private *dev_priv,
|
|
struct vlv_wm_values *wm)
|
|
{
|
|
struct intel_crtc *crtc;
|
|
int num_active_crtcs = 0;
|
|
|
|
wm->level = dev_priv->wm.max_level;
|
|
wm->cxsr = true;
|
|
|
|
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
|
const struct vlv_wm_state *wm_state = &crtc->wm.active.vlv;
|
|
|
|
if (!crtc->active)
|
|
continue;
|
|
|
|
if (!wm_state->cxsr)
|
|
wm->cxsr = false;
|
|
|
|
num_active_crtcs++;
|
|
wm->level = min_t(int, wm->level, wm_state->num_levels - 1);
|
|
}
|
|
|
|
if (num_active_crtcs != 1)
|
|
wm->cxsr = false;
|
|
|
|
if (num_active_crtcs > 1)
|
|
wm->level = VLV_WM_LEVEL_PM2;
|
|
|
|
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
|
const struct vlv_wm_state *wm_state = &crtc->wm.active.vlv;
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
wm->pipe[pipe] = wm_state->wm[wm->level];
|
|
if (crtc->active && wm->cxsr)
|
|
wm->sr = wm_state->sr[wm->level];
|
|
|
|
wm->ddl[pipe].plane[PLANE_PRIMARY] = DDL_PRECISION_HIGH | 2;
|
|
wm->ddl[pipe].plane[PLANE_SPRITE0] = DDL_PRECISION_HIGH | 2;
|
|
wm->ddl[pipe].plane[PLANE_SPRITE1] = DDL_PRECISION_HIGH | 2;
|
|
wm->ddl[pipe].plane[PLANE_CURSOR] = DDL_PRECISION_HIGH | 2;
|
|
}
|
|
}
|
|
|
|
static void vlv_program_watermarks(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct vlv_wm_values *old_wm = &dev_priv->wm.vlv;
|
|
struct vlv_wm_values new_wm = {};
|
|
|
|
vlv_merge_wm(dev_priv, &new_wm);
|
|
|
|
if (memcmp(old_wm, &new_wm, sizeof(new_wm)) == 0)
|
|
return;
|
|
|
|
if (is_disabling(old_wm->level, new_wm.level, VLV_WM_LEVEL_DDR_DVFS))
|
|
chv_set_memory_dvfs(dev_priv, false);
|
|
|
|
if (is_disabling(old_wm->level, new_wm.level, VLV_WM_LEVEL_PM5))
|
|
chv_set_memory_pm5(dev_priv, false);
|
|
|
|
if (is_disabling(old_wm->cxsr, new_wm.cxsr, true))
|
|
_intel_set_memory_cxsr(dev_priv, false);
|
|
|
|
vlv_write_wm_values(dev_priv, &new_wm);
|
|
|
|
if (is_enabling(old_wm->cxsr, new_wm.cxsr, true))
|
|
_intel_set_memory_cxsr(dev_priv, true);
|
|
|
|
if (is_enabling(old_wm->level, new_wm.level, VLV_WM_LEVEL_PM5))
|
|
chv_set_memory_pm5(dev_priv, true);
|
|
|
|
if (is_enabling(old_wm->level, new_wm.level, VLV_WM_LEVEL_DDR_DVFS))
|
|
chv_set_memory_dvfs(dev_priv, true);
|
|
|
|
*old_wm = new_wm;
|
|
}
|
|
|
|
static void vlv_initial_watermarks(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
crtc->wm.active.vlv = crtc_state->wm.vlv.intermediate;
|
|
vlv_program_watermarks(dev_priv);
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
static void vlv_optimize_watermarks(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
|
|
if (!crtc_state->wm.need_postvbl_update)
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
intel_crtc->wm.active.vlv = crtc_state->wm.vlv.optimal;
|
|
vlv_program_watermarks(dev_priv);
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
static void i965_update_wm(struct intel_crtc *unused_crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
|
|
struct intel_crtc *crtc;
|
|
int srwm = 1;
|
|
int cursor_sr = 16;
|
|
bool cxsr_enabled;
|
|
|
|
/* Calc sr entries for one plane configs */
|
|
crtc = single_enabled_crtc(dev_priv);
|
|
if (crtc) {
|
|
/* self-refresh has much higher latency */
|
|
static const int sr_latency_ns = 12000;
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&crtc->config->base.adjusted_mode;
|
|
const struct drm_framebuffer *fb =
|
|
crtc->base.primary->state->fb;
|
|
int clock = adjusted_mode->crtc_clock;
|
|
int htotal = adjusted_mode->crtc_htotal;
|
|
int hdisplay = crtc->config->pipe_src_w;
|
|
int cpp = fb->format->cpp[0];
|
|
int entries;
|
|
|
|
entries = intel_wm_method2(clock, htotal,
|
|
hdisplay, cpp, sr_latency_ns / 100);
|
|
entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE);
|
|
srwm = I965_FIFO_SIZE - entries;
|
|
if (srwm < 0)
|
|
srwm = 1;
|
|
srwm &= 0x1ff;
|
|
DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
|
|
entries, srwm);
|
|
|
|
entries = intel_wm_method2(clock, htotal,
|
|
crtc->base.cursor->state->crtc_w, 4,
|
|
sr_latency_ns / 100);
|
|
entries = DIV_ROUND_UP(entries,
|
|
i965_cursor_wm_info.cacheline_size) +
|
|
i965_cursor_wm_info.guard_size;
|
|
|
|
cursor_sr = i965_cursor_wm_info.fifo_size - entries;
|
|
if (cursor_sr > i965_cursor_wm_info.max_wm)
|
|
cursor_sr = i965_cursor_wm_info.max_wm;
|
|
|
|
DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
|
|
"cursor %d\n", srwm, cursor_sr);
|
|
|
|
cxsr_enabled = true;
|
|
} else {
|
|
cxsr_enabled = false;
|
|
/* Turn off self refresh if both pipes are enabled */
|
|
intel_set_memory_cxsr(dev_priv, false);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
|
|
srwm);
|
|
|
|
/* 965 has limitations... */
|
|
I915_WRITE(DSPFW1, FW_WM(srwm, SR) |
|
|
FW_WM(8, CURSORB) |
|
|
FW_WM(8, PLANEB) |
|
|
FW_WM(8, PLANEA));
|
|
I915_WRITE(DSPFW2, FW_WM(8, CURSORA) |
|
|
FW_WM(8, PLANEC_OLD));
|
|
/* update cursor SR watermark */
|
|
I915_WRITE(DSPFW3, FW_WM(cursor_sr, CURSOR_SR));
|
|
|
|
if (cxsr_enabled)
|
|
intel_set_memory_cxsr(dev_priv, true);
|
|
}
|
|
|
|
#undef FW_WM
|
|
|
|
static void i9xx_update_wm(struct intel_crtc *unused_crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
|
|
const struct intel_watermark_params *wm_info;
|
|
uint32_t fwater_lo;
|
|
uint32_t fwater_hi;
|
|
int cwm, srwm = 1;
|
|
int fifo_size;
|
|
int planea_wm, planeb_wm;
|
|
struct intel_crtc *crtc, *enabled = NULL;
|
|
|
|
if (IS_I945GM(dev_priv))
|
|
wm_info = &i945_wm_info;
|
|
else if (!IS_GEN2(dev_priv))
|
|
wm_info = &i915_wm_info;
|
|
else
|
|
wm_info = &i830_a_wm_info;
|
|
|
|
fifo_size = dev_priv->display.get_fifo_size(dev_priv, PLANE_A);
|
|
crtc = intel_get_crtc_for_plane(dev_priv, PLANE_A);
|
|
if (intel_crtc_active(crtc)) {
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&crtc->config->base.adjusted_mode;
|
|
const struct drm_framebuffer *fb =
|
|
crtc->base.primary->state->fb;
|
|
int cpp;
|
|
|
|
if (IS_GEN2(dev_priv))
|
|
cpp = 4;
|
|
else
|
|
cpp = fb->format->cpp[0];
|
|
|
|
planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
|
|
wm_info, fifo_size, cpp,
|
|
pessimal_latency_ns);
|
|
enabled = crtc;
|
|
} else {
|
|
planea_wm = fifo_size - wm_info->guard_size;
|
|
if (planea_wm > (long)wm_info->max_wm)
|
|
planea_wm = wm_info->max_wm;
|
|
}
|
|
|
|
if (IS_GEN2(dev_priv))
|
|
wm_info = &i830_bc_wm_info;
|
|
|
|
fifo_size = dev_priv->display.get_fifo_size(dev_priv, PLANE_B);
|
|
crtc = intel_get_crtc_for_plane(dev_priv, PLANE_B);
|
|
if (intel_crtc_active(crtc)) {
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&crtc->config->base.adjusted_mode;
|
|
const struct drm_framebuffer *fb =
|
|
crtc->base.primary->state->fb;
|
|
int cpp;
|
|
|
|
if (IS_GEN2(dev_priv))
|
|
cpp = 4;
|
|
else
|
|
cpp = fb->format->cpp[0];
|
|
|
|
planeb_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
|
|
wm_info, fifo_size, cpp,
|
|
pessimal_latency_ns);
|
|
if (enabled == NULL)
|
|
enabled = crtc;
|
|
else
|
|
enabled = NULL;
|
|
} else {
|
|
planeb_wm = fifo_size - wm_info->guard_size;
|
|
if (planeb_wm > (long)wm_info->max_wm)
|
|
planeb_wm = wm_info->max_wm;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
|
|
|
|
if (IS_I915GM(dev_priv) && enabled) {
|
|
struct drm_i915_gem_object *obj;
|
|
|
|
obj = intel_fb_obj(enabled->base.primary->state->fb);
|
|
|
|
/* self-refresh seems busted with untiled */
|
|
if (!i915_gem_object_is_tiled(obj))
|
|
enabled = NULL;
|
|
}
|
|
|
|
/*
|
|
* Overlay gets an aggressive default since video jitter is bad.
|
|
*/
|
|
cwm = 2;
|
|
|
|
/* Play safe and disable self-refresh before adjusting watermarks. */
|
|
intel_set_memory_cxsr(dev_priv, false);
|
|
|
|
/* Calc sr entries for one plane configs */
|
|
if (HAS_FW_BLC(dev_priv) && enabled) {
|
|
/* self-refresh has much higher latency */
|
|
static const int sr_latency_ns = 6000;
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&enabled->config->base.adjusted_mode;
|
|
const struct drm_framebuffer *fb =
|
|
enabled->base.primary->state->fb;
|
|
int clock = adjusted_mode->crtc_clock;
|
|
int htotal = adjusted_mode->crtc_htotal;
|
|
int hdisplay = enabled->config->pipe_src_w;
|
|
int cpp;
|
|
int entries;
|
|
|
|
if (IS_I915GM(dev_priv) || IS_I945GM(dev_priv))
|
|
cpp = 4;
|
|
else
|
|
cpp = fb->format->cpp[0];
|
|
|
|
entries = intel_wm_method2(clock, htotal, hdisplay, cpp,
|
|
sr_latency_ns / 100);
|
|
entries = DIV_ROUND_UP(entries, wm_info->cacheline_size);
|
|
DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
|
|
srwm = wm_info->fifo_size - entries;
|
|
if (srwm < 0)
|
|
srwm = 1;
|
|
|
|
if (IS_I945G(dev_priv) || IS_I945GM(dev_priv))
|
|
I915_WRITE(FW_BLC_SELF,
|
|
FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
|
|
else
|
|
I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
|
|
planea_wm, planeb_wm, cwm, srwm);
|
|
|
|
fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
|
|
fwater_hi = (cwm & 0x1f);
|
|
|
|
/* Set request length to 8 cachelines per fetch */
|
|
fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
|
|
fwater_hi = fwater_hi | (1 << 8);
|
|
|
|
I915_WRITE(FW_BLC, fwater_lo);
|
|
I915_WRITE(FW_BLC2, fwater_hi);
|
|
|
|
if (enabled)
|
|
intel_set_memory_cxsr(dev_priv, true);
|
|
}
|
|
|
|
static void i845_update_wm(struct intel_crtc *unused_crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
|
|
struct intel_crtc *crtc;
|
|
const struct drm_display_mode *adjusted_mode;
|
|
uint32_t fwater_lo;
|
|
int planea_wm;
|
|
|
|
crtc = single_enabled_crtc(dev_priv);
|
|
if (crtc == NULL)
|
|
return;
|
|
|
|
adjusted_mode = &crtc->config->base.adjusted_mode;
|
|
planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
|
|
&i845_wm_info,
|
|
dev_priv->display.get_fifo_size(dev_priv, PLANE_A),
|
|
4, pessimal_latency_ns);
|
|
fwater_lo = I915_READ(FW_BLC) & ~0xfff;
|
|
fwater_lo |= (3<<8) | planea_wm;
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
|
|
|
|
I915_WRITE(FW_BLC, fwater_lo);
|
|
}
|
|
|
|
/* latency must be in 0.1us units. */
|
|
static unsigned int ilk_wm_method1(unsigned int pixel_rate,
|
|
unsigned int cpp,
|
|
unsigned int latency)
|
|
{
|
|
unsigned int ret;
|
|
|
|
ret = intel_wm_method1(pixel_rate, cpp, latency);
|
|
ret = DIV_ROUND_UP(ret, 64) + 2;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* latency must be in 0.1us units. */
|
|
static unsigned int ilk_wm_method2(unsigned int pixel_rate,
|
|
unsigned int htotal,
|
|
unsigned int width,
|
|
unsigned int cpp,
|
|
unsigned int latency)
|
|
{
|
|
unsigned int ret;
|
|
|
|
ret = intel_wm_method2(pixel_rate, htotal,
|
|
width, cpp, latency);
|
|
ret = DIV_ROUND_UP(ret, 64) + 2;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static uint32_t ilk_wm_fbc(uint32_t pri_val, uint32_t horiz_pixels,
|
|
uint8_t cpp)
|
|
{
|
|
/*
|
|
* Neither of these should be possible since this function shouldn't be
|
|
* called if the CRTC is off or the plane is invisible. But let's be
|
|
* extra paranoid to avoid a potential divide-by-zero if we screw up
|
|
* elsewhere in the driver.
|
|
*/
|
|
if (WARN_ON(!cpp))
|
|
return 0;
|
|
if (WARN_ON(!horiz_pixels))
|
|
return 0;
|
|
|
|
return DIV_ROUND_UP(pri_val * 64, horiz_pixels * cpp) + 2;
|
|
}
|
|
|
|
struct ilk_wm_maximums {
|
|
uint16_t pri;
|
|
uint16_t spr;
|
|
uint16_t cur;
|
|
uint16_t fbc;
|
|
};
|
|
|
|
/*
|
|
* For both WM_PIPE and WM_LP.
|
|
* mem_value must be in 0.1us units.
|
|
*/
|
|
static uint32_t ilk_compute_pri_wm(const struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *pstate,
|
|
uint32_t mem_value,
|
|
bool is_lp)
|
|
{
|
|
uint32_t method1, method2;
|
|
int cpp;
|
|
|
|
if (!intel_wm_plane_visible(cstate, pstate))
|
|
return 0;
|
|
|
|
cpp = pstate->base.fb->format->cpp[0];
|
|
|
|
method1 = ilk_wm_method1(cstate->pixel_rate, cpp, mem_value);
|
|
|
|
if (!is_lp)
|
|
return method1;
|
|
|
|
method2 = ilk_wm_method2(cstate->pixel_rate,
|
|
cstate->base.adjusted_mode.crtc_htotal,
|
|
drm_rect_width(&pstate->base.dst),
|
|
cpp, mem_value);
|
|
|
|
return min(method1, method2);
|
|
}
|
|
|
|
/*
|
|
* For both WM_PIPE and WM_LP.
|
|
* mem_value must be in 0.1us units.
|
|
*/
|
|
static uint32_t ilk_compute_spr_wm(const struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *pstate,
|
|
uint32_t mem_value)
|
|
{
|
|
uint32_t method1, method2;
|
|
int cpp;
|
|
|
|
if (!intel_wm_plane_visible(cstate, pstate))
|
|
return 0;
|
|
|
|
cpp = pstate->base.fb->format->cpp[0];
|
|
|
|
method1 = ilk_wm_method1(cstate->pixel_rate, cpp, mem_value);
|
|
method2 = ilk_wm_method2(cstate->pixel_rate,
|
|
cstate->base.adjusted_mode.crtc_htotal,
|
|
drm_rect_width(&pstate->base.dst),
|
|
cpp, mem_value);
|
|
return min(method1, method2);
|
|
}
|
|
|
|
/*
|
|
* For both WM_PIPE and WM_LP.
|
|
* mem_value must be in 0.1us units.
|
|
*/
|
|
static uint32_t ilk_compute_cur_wm(const struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *pstate,
|
|
uint32_t mem_value)
|
|
{
|
|
int cpp;
|
|
|
|
if (!intel_wm_plane_visible(cstate, pstate))
|
|
return 0;
|
|
|
|
cpp = pstate->base.fb->format->cpp[0];
|
|
|
|
return ilk_wm_method2(cstate->pixel_rate,
|
|
cstate->base.adjusted_mode.crtc_htotal,
|
|
pstate->base.crtc_w, cpp, mem_value);
|
|
}
|
|
|
|
/* Only for WM_LP. */
|
|
static uint32_t ilk_compute_fbc_wm(const struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *pstate,
|
|
uint32_t pri_val)
|
|
{
|
|
int cpp;
|
|
|
|
if (!intel_wm_plane_visible(cstate, pstate))
|
|
return 0;
|
|
|
|
cpp = pstate->base.fb->format->cpp[0];
|
|
|
|
return ilk_wm_fbc(pri_val, drm_rect_width(&pstate->base.dst), cpp);
|
|
}
|
|
|
|
static unsigned int
|
|
ilk_display_fifo_size(const struct drm_i915_private *dev_priv)
|
|
{
|
|
if (INTEL_GEN(dev_priv) >= 8)
|
|
return 3072;
|
|
else if (INTEL_GEN(dev_priv) >= 7)
|
|
return 768;
|
|
else
|
|
return 512;
|
|
}
|
|
|
|
static unsigned int
|
|
ilk_plane_wm_reg_max(const struct drm_i915_private *dev_priv,
|
|
int level, bool is_sprite)
|
|
{
|
|
if (INTEL_GEN(dev_priv) >= 8)
|
|
/* BDW primary/sprite plane watermarks */
|
|
return level == 0 ? 255 : 2047;
|
|
else if (INTEL_GEN(dev_priv) >= 7)
|
|
/* IVB/HSW primary/sprite plane watermarks */
|
|
return level == 0 ? 127 : 1023;
|
|
else if (!is_sprite)
|
|
/* ILK/SNB primary plane watermarks */
|
|
return level == 0 ? 127 : 511;
|
|
else
|
|
/* ILK/SNB sprite plane watermarks */
|
|
return level == 0 ? 63 : 255;
|
|
}
|
|
|
|
static unsigned int
|
|
ilk_cursor_wm_reg_max(const struct drm_i915_private *dev_priv, int level)
|
|
{
|
|
if (INTEL_GEN(dev_priv) >= 7)
|
|
return level == 0 ? 63 : 255;
|
|
else
|
|
return level == 0 ? 31 : 63;
|
|
}
|
|
|
|
static unsigned int ilk_fbc_wm_reg_max(const struct drm_i915_private *dev_priv)
|
|
{
|
|
if (INTEL_GEN(dev_priv) >= 8)
|
|
return 31;
|
|
else
|
|
return 15;
|
|
}
|
|
|
|
/* Calculate the maximum primary/sprite plane watermark */
|
|
static unsigned int ilk_plane_wm_max(const struct drm_device *dev,
|
|
int level,
|
|
const struct intel_wm_config *config,
|
|
enum intel_ddb_partitioning ddb_partitioning,
|
|
bool is_sprite)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
unsigned int fifo_size = ilk_display_fifo_size(dev_priv);
|
|
|
|
/* if sprites aren't enabled, sprites get nothing */
|
|
if (is_sprite && !config->sprites_enabled)
|
|
return 0;
|
|
|
|
/* HSW allows LP1+ watermarks even with multiple pipes */
|
|
if (level == 0 || config->num_pipes_active > 1) {
|
|
fifo_size /= INTEL_INFO(dev_priv)->num_pipes;
|
|
|
|
/*
|
|
* For some reason the non self refresh
|
|
* FIFO size is only half of the self
|
|
* refresh FIFO size on ILK/SNB.
|
|
*/
|
|
if (INTEL_GEN(dev_priv) <= 6)
|
|
fifo_size /= 2;
|
|
}
|
|
|
|
if (config->sprites_enabled) {
|
|
/* level 0 is always calculated with 1:1 split */
|
|
if (level > 0 && ddb_partitioning == INTEL_DDB_PART_5_6) {
|
|
if (is_sprite)
|
|
fifo_size *= 5;
|
|
fifo_size /= 6;
|
|
} else {
|
|
fifo_size /= 2;
|
|
}
|
|
}
|
|
|
|
/* clamp to max that the registers can hold */
|
|
return min(fifo_size, ilk_plane_wm_reg_max(dev_priv, level, is_sprite));
|
|
}
|
|
|
|
/* Calculate the maximum cursor plane watermark */
|
|
static unsigned int ilk_cursor_wm_max(const struct drm_device *dev,
|
|
int level,
|
|
const struct intel_wm_config *config)
|
|
{
|
|
/* HSW LP1+ watermarks w/ multiple pipes */
|
|
if (level > 0 && config->num_pipes_active > 1)
|
|
return 64;
|
|
|
|
/* otherwise just report max that registers can hold */
|
|
return ilk_cursor_wm_reg_max(to_i915(dev), level);
|
|
}
|
|
|
|
static void ilk_compute_wm_maximums(const struct drm_device *dev,
|
|
int level,
|
|
const struct intel_wm_config *config,
|
|
enum intel_ddb_partitioning ddb_partitioning,
|
|
struct ilk_wm_maximums *max)
|
|
{
|
|
max->pri = ilk_plane_wm_max(dev, level, config, ddb_partitioning, false);
|
|
max->spr = ilk_plane_wm_max(dev, level, config, ddb_partitioning, true);
|
|
max->cur = ilk_cursor_wm_max(dev, level, config);
|
|
max->fbc = ilk_fbc_wm_reg_max(to_i915(dev));
|
|
}
|
|
|
|
static void ilk_compute_wm_reg_maximums(const struct drm_i915_private *dev_priv,
|
|
int level,
|
|
struct ilk_wm_maximums *max)
|
|
{
|
|
max->pri = ilk_plane_wm_reg_max(dev_priv, level, false);
|
|
max->spr = ilk_plane_wm_reg_max(dev_priv, level, true);
|
|
max->cur = ilk_cursor_wm_reg_max(dev_priv, level);
|
|
max->fbc = ilk_fbc_wm_reg_max(dev_priv);
|
|
}
|
|
|
|
static bool ilk_validate_wm_level(int level,
|
|
const struct ilk_wm_maximums *max,
|
|
struct intel_wm_level *result)
|
|
{
|
|
bool ret;
|
|
|
|
/* already determined to be invalid? */
|
|
if (!result->enable)
|
|
return false;
|
|
|
|
result->enable = result->pri_val <= max->pri &&
|
|
result->spr_val <= max->spr &&
|
|
result->cur_val <= max->cur;
|
|
|
|
ret = result->enable;
|
|
|
|
/*
|
|
* HACK until we can pre-compute everything,
|
|
* and thus fail gracefully if LP0 watermarks
|
|
* are exceeded...
|
|
*/
|
|
if (level == 0 && !result->enable) {
|
|
if (result->pri_val > max->pri)
|
|
DRM_DEBUG_KMS("Primary WM%d too large %u (max %u)\n",
|
|
level, result->pri_val, max->pri);
|
|
if (result->spr_val > max->spr)
|
|
DRM_DEBUG_KMS("Sprite WM%d too large %u (max %u)\n",
|
|
level, result->spr_val, max->spr);
|
|
if (result->cur_val > max->cur)
|
|
DRM_DEBUG_KMS("Cursor WM%d too large %u (max %u)\n",
|
|
level, result->cur_val, max->cur);
|
|
|
|
result->pri_val = min_t(uint32_t, result->pri_val, max->pri);
|
|
result->spr_val = min_t(uint32_t, result->spr_val, max->spr);
|
|
result->cur_val = min_t(uint32_t, result->cur_val, max->cur);
|
|
result->enable = true;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ilk_compute_wm_level(const struct drm_i915_private *dev_priv,
|
|
const struct intel_crtc *intel_crtc,
|
|
int level,
|
|
struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *pristate,
|
|
const struct intel_plane_state *sprstate,
|
|
const struct intel_plane_state *curstate,
|
|
struct intel_wm_level *result)
|
|
{
|
|
uint16_t pri_latency = dev_priv->wm.pri_latency[level];
|
|
uint16_t spr_latency = dev_priv->wm.spr_latency[level];
|
|
uint16_t cur_latency = dev_priv->wm.cur_latency[level];
|
|
|
|
/* WM1+ latency values stored in 0.5us units */
|
|
if (level > 0) {
|
|
pri_latency *= 5;
|
|
spr_latency *= 5;
|
|
cur_latency *= 5;
|
|
}
|
|
|
|
if (pristate) {
|
|
result->pri_val = ilk_compute_pri_wm(cstate, pristate,
|
|
pri_latency, level);
|
|
result->fbc_val = ilk_compute_fbc_wm(cstate, pristate, result->pri_val);
|
|
}
|
|
|
|
if (sprstate)
|
|
result->spr_val = ilk_compute_spr_wm(cstate, sprstate, spr_latency);
|
|
|
|
if (curstate)
|
|
result->cur_val = ilk_compute_cur_wm(cstate, curstate, cur_latency);
|
|
|
|
result->enable = true;
|
|
}
|
|
|
|
static uint32_t
|
|
hsw_compute_linetime_wm(const struct intel_crtc_state *cstate)
|
|
{
|
|
const struct intel_atomic_state *intel_state =
|
|
to_intel_atomic_state(cstate->base.state);
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&cstate->base.adjusted_mode;
|
|
u32 linetime, ips_linetime;
|
|
|
|
if (!cstate->base.active)
|
|
return 0;
|
|
if (WARN_ON(adjusted_mode->crtc_clock == 0))
|
|
return 0;
|
|
if (WARN_ON(intel_state->cdclk.logical.cdclk == 0))
|
|
return 0;
|
|
|
|
/* The WM are computed with base on how long it takes to fill a single
|
|
* row at the given clock rate, multiplied by 8.
|
|
* */
|
|
linetime = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
|
|
adjusted_mode->crtc_clock);
|
|
ips_linetime = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
|
|
intel_state->cdclk.logical.cdclk);
|
|
|
|
return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
|
|
PIPE_WM_LINETIME_TIME(linetime);
|
|
}
|
|
|
|
static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
|
|
uint16_t wm[8])
|
|
{
|
|
if (INTEL_GEN(dev_priv) >= 9) {
|
|
uint32_t val;
|
|
int ret, i;
|
|
int level, max_level = ilk_wm_max_level(dev_priv);
|
|
|
|
/* read the first set of memory latencies[0:3] */
|
|
val = 0; /* data0 to be programmed to 0 for first set */
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
ret = sandybridge_pcode_read(dev_priv,
|
|
GEN9_PCODE_READ_MEM_LATENCY,
|
|
&val);
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
|
|
if (ret) {
|
|
DRM_ERROR("SKL Mailbox read error = %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
wm[0] = val & GEN9_MEM_LATENCY_LEVEL_MASK;
|
|
wm[1] = (val >> GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT) &
|
|
GEN9_MEM_LATENCY_LEVEL_MASK;
|
|
wm[2] = (val >> GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT) &
|
|
GEN9_MEM_LATENCY_LEVEL_MASK;
|
|
wm[3] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) &
|
|
GEN9_MEM_LATENCY_LEVEL_MASK;
|
|
|
|
/* read the second set of memory latencies[4:7] */
|
|
val = 1; /* data0 to be programmed to 1 for second set */
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
ret = sandybridge_pcode_read(dev_priv,
|
|
GEN9_PCODE_READ_MEM_LATENCY,
|
|
&val);
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
if (ret) {
|
|
DRM_ERROR("SKL Mailbox read error = %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
wm[4] = val & GEN9_MEM_LATENCY_LEVEL_MASK;
|
|
wm[5] = (val >> GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT) &
|
|
GEN9_MEM_LATENCY_LEVEL_MASK;
|
|
wm[6] = (val >> GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT) &
|
|
GEN9_MEM_LATENCY_LEVEL_MASK;
|
|
wm[7] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) &
|
|
GEN9_MEM_LATENCY_LEVEL_MASK;
|
|
|
|
/*
|
|
* If a level n (n > 1) has a 0us latency, all levels m (m >= n)
|
|
* need to be disabled. We make sure to sanitize the values out
|
|
* of the punit to satisfy this requirement.
|
|
*/
|
|
for (level = 1; level <= max_level; level++) {
|
|
if (wm[level] == 0) {
|
|
for (i = level + 1; i <= max_level; i++)
|
|
wm[i] = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* WaWmMemoryReadLatency:skl+,glk
|
|
*
|
|
* punit doesn't take into account the read latency so we need
|
|
* to add 2us to the various latency levels we retrieve from the
|
|
* punit when level 0 response data us 0us.
|
|
*/
|
|
if (wm[0] == 0) {
|
|
wm[0] += 2;
|
|
for (level = 1; level <= max_level; level++) {
|
|
if (wm[level] == 0)
|
|
break;
|
|
wm[level] += 2;
|
|
}
|
|
}
|
|
|
|
} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
|
|
uint64_t sskpd = I915_READ64(MCH_SSKPD);
|
|
|
|
wm[0] = (sskpd >> 56) & 0xFF;
|
|
if (wm[0] == 0)
|
|
wm[0] = sskpd & 0xF;
|
|
wm[1] = (sskpd >> 4) & 0xFF;
|
|
wm[2] = (sskpd >> 12) & 0xFF;
|
|
wm[3] = (sskpd >> 20) & 0x1FF;
|
|
wm[4] = (sskpd >> 32) & 0x1FF;
|
|
} else if (INTEL_GEN(dev_priv) >= 6) {
|
|
uint32_t sskpd = I915_READ(MCH_SSKPD);
|
|
|
|
wm[0] = (sskpd >> SSKPD_WM0_SHIFT) & SSKPD_WM_MASK;
|
|
wm[1] = (sskpd >> SSKPD_WM1_SHIFT) & SSKPD_WM_MASK;
|
|
wm[2] = (sskpd >> SSKPD_WM2_SHIFT) & SSKPD_WM_MASK;
|
|
wm[3] = (sskpd >> SSKPD_WM3_SHIFT) & SSKPD_WM_MASK;
|
|
} else if (INTEL_GEN(dev_priv) >= 5) {
|
|
uint32_t mltr = I915_READ(MLTR_ILK);
|
|
|
|
/* ILK primary LP0 latency is 700 ns */
|
|
wm[0] = 7;
|
|
wm[1] = (mltr >> MLTR_WM1_SHIFT) & ILK_SRLT_MASK;
|
|
wm[2] = (mltr >> MLTR_WM2_SHIFT) & ILK_SRLT_MASK;
|
|
} else {
|
|
MISSING_CASE(INTEL_DEVID(dev_priv));
|
|
}
|
|
}
|
|
|
|
static void intel_fixup_spr_wm_latency(struct drm_i915_private *dev_priv,
|
|
uint16_t wm[5])
|
|
{
|
|
/* ILK sprite LP0 latency is 1300 ns */
|
|
if (IS_GEN5(dev_priv))
|
|
wm[0] = 13;
|
|
}
|
|
|
|
static void intel_fixup_cur_wm_latency(struct drm_i915_private *dev_priv,
|
|
uint16_t wm[5])
|
|
{
|
|
/* ILK cursor LP0 latency is 1300 ns */
|
|
if (IS_GEN5(dev_priv))
|
|
wm[0] = 13;
|
|
}
|
|
|
|
int ilk_wm_max_level(const struct drm_i915_private *dev_priv)
|
|
{
|
|
/* how many WM levels are we expecting */
|
|
if (INTEL_GEN(dev_priv) >= 9)
|
|
return 7;
|
|
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
return 4;
|
|
else if (INTEL_GEN(dev_priv) >= 6)
|
|
return 3;
|
|
else
|
|
return 2;
|
|
}
|
|
|
|
static void intel_print_wm_latency(struct drm_i915_private *dev_priv,
|
|
const char *name,
|
|
const uint16_t wm[8])
|
|
{
|
|
int level, max_level = ilk_wm_max_level(dev_priv);
|
|
|
|
for (level = 0; level <= max_level; level++) {
|
|
unsigned int latency = wm[level];
|
|
|
|
if (latency == 0) {
|
|
DRM_ERROR("%s WM%d latency not provided\n",
|
|
name, level);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* - latencies are in us on gen9.
|
|
* - before then, WM1+ latency values are in 0.5us units
|
|
*/
|
|
if (INTEL_GEN(dev_priv) >= 9)
|
|
latency *= 10;
|
|
else if (level > 0)
|
|
latency *= 5;
|
|
|
|
DRM_DEBUG_KMS("%s WM%d latency %u (%u.%u usec)\n",
|
|
name, level, wm[level],
|
|
latency / 10, latency % 10);
|
|
}
|
|
}
|
|
|
|
static bool ilk_increase_wm_latency(struct drm_i915_private *dev_priv,
|
|
uint16_t wm[5], uint16_t min)
|
|
{
|
|
int level, max_level = ilk_wm_max_level(dev_priv);
|
|
|
|
if (wm[0] >= min)
|
|
return false;
|
|
|
|
wm[0] = max(wm[0], min);
|
|
for (level = 1; level <= max_level; level++)
|
|
wm[level] = max_t(uint16_t, wm[level], DIV_ROUND_UP(min, 5));
|
|
|
|
return true;
|
|
}
|
|
|
|
static void snb_wm_latency_quirk(struct drm_i915_private *dev_priv)
|
|
{
|
|
bool changed;
|
|
|
|
/*
|
|
* The BIOS provided WM memory latency values are often
|
|
* inadequate for high resolution displays. Adjust them.
|
|
*/
|
|
changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
|
|
ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12) |
|
|
ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12);
|
|
|
|
if (!changed)
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("WM latency values increased to avoid potential underruns\n");
|
|
intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency);
|
|
intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
|
|
intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
|
|
}
|
|
|
|
static void ilk_setup_wm_latency(struct drm_i915_private *dev_priv)
|
|
{
|
|
intel_read_wm_latency(dev_priv, dev_priv->wm.pri_latency);
|
|
|
|
memcpy(dev_priv->wm.spr_latency, dev_priv->wm.pri_latency,
|
|
sizeof(dev_priv->wm.pri_latency));
|
|
memcpy(dev_priv->wm.cur_latency, dev_priv->wm.pri_latency,
|
|
sizeof(dev_priv->wm.pri_latency));
|
|
|
|
intel_fixup_spr_wm_latency(dev_priv, dev_priv->wm.spr_latency);
|
|
intel_fixup_cur_wm_latency(dev_priv, dev_priv->wm.cur_latency);
|
|
|
|
intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency);
|
|
intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
|
|
intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
|
|
|
|
if (IS_GEN6(dev_priv))
|
|
snb_wm_latency_quirk(dev_priv);
|
|
}
|
|
|
|
static void skl_setup_wm_latency(struct drm_i915_private *dev_priv)
|
|
{
|
|
intel_read_wm_latency(dev_priv, dev_priv->wm.skl_latency);
|
|
intel_print_wm_latency(dev_priv, "Gen9 Plane", dev_priv->wm.skl_latency);
|
|
}
|
|
|
|
static bool ilk_validate_pipe_wm(struct drm_device *dev,
|
|
struct intel_pipe_wm *pipe_wm)
|
|
{
|
|
/* LP0 watermark maximums depend on this pipe alone */
|
|
const struct intel_wm_config config = {
|
|
.num_pipes_active = 1,
|
|
.sprites_enabled = pipe_wm->sprites_enabled,
|
|
.sprites_scaled = pipe_wm->sprites_scaled,
|
|
};
|
|
struct ilk_wm_maximums max;
|
|
|
|
/* LP0 watermarks always use 1/2 DDB partitioning */
|
|
ilk_compute_wm_maximums(dev, 0, &config, INTEL_DDB_PART_1_2, &max);
|
|
|
|
/* At least LP0 must be valid */
|
|
if (!ilk_validate_wm_level(0, &max, &pipe_wm->wm[0])) {
|
|
DRM_DEBUG_KMS("LP0 watermark invalid\n");
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Compute new watermarks for the pipe */
|
|
static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate)
|
|
{
|
|
struct drm_atomic_state *state = cstate->base.state;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
|
|
struct intel_pipe_wm *pipe_wm;
|
|
struct drm_device *dev = state->dev;
|
|
const struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct drm_plane *plane;
|
|
const struct drm_plane_state *plane_state;
|
|
const struct intel_plane_state *pristate = NULL;
|
|
const struct intel_plane_state *sprstate = NULL;
|
|
const struct intel_plane_state *curstate = NULL;
|
|
int level, max_level = ilk_wm_max_level(dev_priv), usable_level;
|
|
struct ilk_wm_maximums max;
|
|
|
|
pipe_wm = &cstate->wm.ilk.optimal;
|
|
|
|
drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, &cstate->base) {
|
|
const struct intel_plane_state *ps = to_intel_plane_state(plane_state);
|
|
|
|
if (plane->type == DRM_PLANE_TYPE_PRIMARY)
|
|
pristate = ps;
|
|
else if (plane->type == DRM_PLANE_TYPE_OVERLAY)
|
|
sprstate = ps;
|
|
else if (plane->type == DRM_PLANE_TYPE_CURSOR)
|
|
curstate = ps;
|
|
}
|
|
|
|
pipe_wm->pipe_enabled = cstate->base.active;
|
|
if (sprstate) {
|
|
pipe_wm->sprites_enabled = sprstate->base.visible;
|
|
pipe_wm->sprites_scaled = sprstate->base.visible &&
|
|
(drm_rect_width(&sprstate->base.dst) != drm_rect_width(&sprstate->base.src) >> 16 ||
|
|
drm_rect_height(&sprstate->base.dst) != drm_rect_height(&sprstate->base.src) >> 16);
|
|
}
|
|
|
|
usable_level = max_level;
|
|
|
|
/* ILK/SNB: LP2+ watermarks only w/o sprites */
|
|
if (INTEL_GEN(dev_priv) <= 6 && pipe_wm->sprites_enabled)
|
|
usable_level = 1;
|
|
|
|
/* ILK/SNB/IVB: LP1+ watermarks only w/o scaling */
|
|
if (pipe_wm->sprites_scaled)
|
|
usable_level = 0;
|
|
|
|
memset(&pipe_wm->wm, 0, sizeof(pipe_wm->wm));
|
|
ilk_compute_wm_level(dev_priv, intel_crtc, 0, cstate,
|
|
pristate, sprstate, curstate, &pipe_wm->wm[0]);
|
|
|
|
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
pipe_wm->linetime = hsw_compute_linetime_wm(cstate);
|
|
|
|
if (!ilk_validate_pipe_wm(dev, pipe_wm))
|
|
return -EINVAL;
|
|
|
|
ilk_compute_wm_reg_maximums(dev_priv, 1, &max);
|
|
|
|
for (level = 1; level <= usable_level; level++) {
|
|
struct intel_wm_level *wm = &pipe_wm->wm[level];
|
|
|
|
ilk_compute_wm_level(dev_priv, intel_crtc, level, cstate,
|
|
pristate, sprstate, curstate, wm);
|
|
|
|
/*
|
|
* Disable any watermark level that exceeds the
|
|
* register maximums since such watermarks are
|
|
* always invalid.
|
|
*/
|
|
if (!ilk_validate_wm_level(level, &max, wm)) {
|
|
memset(wm, 0, sizeof(*wm));
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Build a set of 'intermediate' watermark values that satisfy both the old
|
|
* state and the new state. These can be programmed to the hardware
|
|
* immediately.
|
|
*/
|
|
static int ilk_compute_intermediate_wm(struct drm_device *dev,
|
|
struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *newstate)
|
|
{
|
|
struct intel_pipe_wm *a = &newstate->wm.ilk.intermediate;
|
|
struct intel_atomic_state *intel_state =
|
|
to_intel_atomic_state(newstate->base.state);
|
|
const struct intel_crtc_state *oldstate =
|
|
intel_atomic_get_old_crtc_state(intel_state, intel_crtc);
|
|
const struct intel_pipe_wm *b = &oldstate->wm.ilk.optimal;
|
|
int level, max_level = ilk_wm_max_level(to_i915(dev));
|
|
|
|
/*
|
|
* Start with the final, target watermarks, then combine with the
|
|
* currently active watermarks to get values that are safe both before
|
|
* and after the vblank.
|
|
*/
|
|
*a = newstate->wm.ilk.optimal;
|
|
if (!newstate->base.active || drm_atomic_crtc_needs_modeset(&newstate->base))
|
|
return 0;
|
|
|
|
a->pipe_enabled |= b->pipe_enabled;
|
|
a->sprites_enabled |= b->sprites_enabled;
|
|
a->sprites_scaled |= b->sprites_scaled;
|
|
|
|
for (level = 0; level <= max_level; level++) {
|
|
struct intel_wm_level *a_wm = &a->wm[level];
|
|
const struct intel_wm_level *b_wm = &b->wm[level];
|
|
|
|
a_wm->enable &= b_wm->enable;
|
|
a_wm->pri_val = max(a_wm->pri_val, b_wm->pri_val);
|
|
a_wm->spr_val = max(a_wm->spr_val, b_wm->spr_val);
|
|
a_wm->cur_val = max(a_wm->cur_val, b_wm->cur_val);
|
|
a_wm->fbc_val = max(a_wm->fbc_val, b_wm->fbc_val);
|
|
}
|
|
|
|
/*
|
|
* We need to make sure that these merged watermark values are
|
|
* actually a valid configuration themselves. If they're not,
|
|
* there's no safe way to transition from the old state to
|
|
* the new state, so we need to fail the atomic transaction.
|
|
*/
|
|
if (!ilk_validate_pipe_wm(dev, a))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* If our intermediate WM are identical to the final WM, then we can
|
|
* omit the post-vblank programming; only update if it's different.
|
|
*/
|
|
if (memcmp(a, &newstate->wm.ilk.optimal, sizeof(*a)) != 0)
|
|
newstate->wm.need_postvbl_update = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Merge the watermarks from all active pipes for a specific level.
|
|
*/
|
|
static void ilk_merge_wm_level(struct drm_device *dev,
|
|
int level,
|
|
struct intel_wm_level *ret_wm)
|
|
{
|
|
const struct intel_crtc *intel_crtc;
|
|
|
|
ret_wm->enable = true;
|
|
|
|
for_each_intel_crtc(dev, intel_crtc) {
|
|
const struct intel_pipe_wm *active = &intel_crtc->wm.active.ilk;
|
|
const struct intel_wm_level *wm = &active->wm[level];
|
|
|
|
if (!active->pipe_enabled)
|
|
continue;
|
|
|
|
/*
|
|
* The watermark values may have been used in the past,
|
|
* so we must maintain them in the registers for some
|
|
* time even if the level is now disabled.
|
|
*/
|
|
if (!wm->enable)
|
|
ret_wm->enable = false;
|
|
|
|
ret_wm->pri_val = max(ret_wm->pri_val, wm->pri_val);
|
|
ret_wm->spr_val = max(ret_wm->spr_val, wm->spr_val);
|
|
ret_wm->cur_val = max(ret_wm->cur_val, wm->cur_val);
|
|
ret_wm->fbc_val = max(ret_wm->fbc_val, wm->fbc_val);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Merge all low power watermarks for all active pipes.
|
|
*/
|
|
static void ilk_wm_merge(struct drm_device *dev,
|
|
const struct intel_wm_config *config,
|
|
const struct ilk_wm_maximums *max,
|
|
struct intel_pipe_wm *merged)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
int level, max_level = ilk_wm_max_level(dev_priv);
|
|
int last_enabled_level = max_level;
|
|
|
|
/* ILK/SNB/IVB: LP1+ watermarks only w/ single pipe */
|
|
if ((INTEL_GEN(dev_priv) <= 6 || IS_IVYBRIDGE(dev_priv)) &&
|
|
config->num_pipes_active > 1)
|
|
last_enabled_level = 0;
|
|
|
|
/* ILK: FBC WM must be disabled always */
|
|
merged->fbc_wm_enabled = INTEL_GEN(dev_priv) >= 6;
|
|
|
|
/* merge each WM1+ level */
|
|
for (level = 1; level <= max_level; level++) {
|
|
struct intel_wm_level *wm = &merged->wm[level];
|
|
|
|
ilk_merge_wm_level(dev, level, wm);
|
|
|
|
if (level > last_enabled_level)
|
|
wm->enable = false;
|
|
else if (!ilk_validate_wm_level(level, max, wm))
|
|
/* make sure all following levels get disabled */
|
|
last_enabled_level = level - 1;
|
|
|
|
/*
|
|
* The spec says it is preferred to disable
|
|
* FBC WMs instead of disabling a WM level.
|
|
*/
|
|
if (wm->fbc_val > max->fbc) {
|
|
if (wm->enable)
|
|
merged->fbc_wm_enabled = false;
|
|
wm->fbc_val = 0;
|
|
}
|
|
}
|
|
|
|
/* ILK: LP2+ must be disabled when FBC WM is disabled but FBC enabled */
|
|
/*
|
|
* FIXME this is racy. FBC might get enabled later.
|
|
* What we should check here is whether FBC can be
|
|
* enabled sometime later.
|
|
*/
|
|
if (IS_GEN5(dev_priv) && !merged->fbc_wm_enabled &&
|
|
intel_fbc_is_active(dev_priv)) {
|
|
for (level = 2; level <= max_level; level++) {
|
|
struct intel_wm_level *wm = &merged->wm[level];
|
|
|
|
wm->enable = false;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int ilk_wm_lp_to_level(int wm_lp, const struct intel_pipe_wm *pipe_wm)
|
|
{
|
|
/* LP1,LP2,LP3 levels are either 1,2,3 or 1,3,4 */
|
|
return wm_lp + (wm_lp >= 2 && pipe_wm->wm[4].enable);
|
|
}
|
|
|
|
/* The value we need to program into the WM_LPx latency field */
|
|
static unsigned int ilk_wm_lp_latency(struct drm_device *dev, int level)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
|
|
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
return 2 * level;
|
|
else
|
|
return dev_priv->wm.pri_latency[level];
|
|
}
|
|
|
|
static void ilk_compute_wm_results(struct drm_device *dev,
|
|
const struct intel_pipe_wm *merged,
|
|
enum intel_ddb_partitioning partitioning,
|
|
struct ilk_wm_values *results)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *intel_crtc;
|
|
int level, wm_lp;
|
|
|
|
results->enable_fbc_wm = merged->fbc_wm_enabled;
|
|
results->partitioning = partitioning;
|
|
|
|
/* LP1+ register values */
|
|
for (wm_lp = 1; wm_lp <= 3; wm_lp++) {
|
|
const struct intel_wm_level *r;
|
|
|
|
level = ilk_wm_lp_to_level(wm_lp, merged);
|
|
|
|
r = &merged->wm[level];
|
|
|
|
/*
|
|
* Maintain the watermark values even if the level is
|
|
* disabled. Doing otherwise could cause underruns.
|
|
*/
|
|
results->wm_lp[wm_lp - 1] =
|
|
(ilk_wm_lp_latency(dev, level) << WM1_LP_LATENCY_SHIFT) |
|
|
(r->pri_val << WM1_LP_SR_SHIFT) |
|
|
r->cur_val;
|
|
|
|
if (r->enable)
|
|
results->wm_lp[wm_lp - 1] |= WM1_LP_SR_EN;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 8)
|
|
results->wm_lp[wm_lp - 1] |=
|
|
r->fbc_val << WM1_LP_FBC_SHIFT_BDW;
|
|
else
|
|
results->wm_lp[wm_lp - 1] |=
|
|
r->fbc_val << WM1_LP_FBC_SHIFT;
|
|
|
|
/*
|
|
* Always set WM1S_LP_EN when spr_val != 0, even if the
|
|
* level is disabled. Doing otherwise could cause underruns.
|
|
*/
|
|
if (INTEL_GEN(dev_priv) <= 6 && r->spr_val) {
|
|
WARN_ON(wm_lp != 1);
|
|
results->wm_lp_spr[wm_lp - 1] = WM1S_LP_EN | r->spr_val;
|
|
} else
|
|
results->wm_lp_spr[wm_lp - 1] = r->spr_val;
|
|
}
|
|
|
|
/* LP0 register values */
|
|
for_each_intel_crtc(dev, intel_crtc) {
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
const struct intel_wm_level *r =
|
|
&intel_crtc->wm.active.ilk.wm[0];
|
|
|
|
if (WARN_ON(!r->enable))
|
|
continue;
|
|
|
|
results->wm_linetime[pipe] = intel_crtc->wm.active.ilk.linetime;
|
|
|
|
results->wm_pipe[pipe] =
|
|
(r->pri_val << WM0_PIPE_PLANE_SHIFT) |
|
|
(r->spr_val << WM0_PIPE_SPRITE_SHIFT) |
|
|
r->cur_val;
|
|
}
|
|
}
|
|
|
|
/* Find the result with the highest level enabled. Check for enable_fbc_wm in
|
|
* case both are at the same level. Prefer r1 in case they're the same. */
|
|
static struct intel_pipe_wm *ilk_find_best_result(struct drm_device *dev,
|
|
struct intel_pipe_wm *r1,
|
|
struct intel_pipe_wm *r2)
|
|
{
|
|
int level, max_level = ilk_wm_max_level(to_i915(dev));
|
|
int level1 = 0, level2 = 0;
|
|
|
|
for (level = 1; level <= max_level; level++) {
|
|
if (r1->wm[level].enable)
|
|
level1 = level;
|
|
if (r2->wm[level].enable)
|
|
level2 = level;
|
|
}
|
|
|
|
if (level1 == level2) {
|
|
if (r2->fbc_wm_enabled && !r1->fbc_wm_enabled)
|
|
return r2;
|
|
else
|
|
return r1;
|
|
} else if (level1 > level2) {
|
|
return r1;
|
|
} else {
|
|
return r2;
|
|
}
|
|
}
|
|
|
|
/* dirty bits used to track which watermarks need changes */
|
|
#define WM_DIRTY_PIPE(pipe) (1 << (pipe))
|
|
#define WM_DIRTY_LINETIME(pipe) (1 << (8 + (pipe)))
|
|
#define WM_DIRTY_LP(wm_lp) (1 << (15 + (wm_lp)))
|
|
#define WM_DIRTY_LP_ALL (WM_DIRTY_LP(1) | WM_DIRTY_LP(2) | WM_DIRTY_LP(3))
|
|
#define WM_DIRTY_FBC (1 << 24)
|
|
#define WM_DIRTY_DDB (1 << 25)
|
|
|
|
static unsigned int ilk_compute_wm_dirty(struct drm_i915_private *dev_priv,
|
|
const struct ilk_wm_values *old,
|
|
const struct ilk_wm_values *new)
|
|
{
|
|
unsigned int dirty = 0;
|
|
enum pipe pipe;
|
|
int wm_lp;
|
|
|
|
for_each_pipe(dev_priv, pipe) {
|
|
if (old->wm_linetime[pipe] != new->wm_linetime[pipe]) {
|
|
dirty |= WM_DIRTY_LINETIME(pipe);
|
|
/* Must disable LP1+ watermarks too */
|
|
dirty |= WM_DIRTY_LP_ALL;
|
|
}
|
|
|
|
if (old->wm_pipe[pipe] != new->wm_pipe[pipe]) {
|
|
dirty |= WM_DIRTY_PIPE(pipe);
|
|
/* Must disable LP1+ watermarks too */
|
|
dirty |= WM_DIRTY_LP_ALL;
|
|
}
|
|
}
|
|
|
|
if (old->enable_fbc_wm != new->enable_fbc_wm) {
|
|
dirty |= WM_DIRTY_FBC;
|
|
/* Must disable LP1+ watermarks too */
|
|
dirty |= WM_DIRTY_LP_ALL;
|
|
}
|
|
|
|
if (old->partitioning != new->partitioning) {
|
|
dirty |= WM_DIRTY_DDB;
|
|
/* Must disable LP1+ watermarks too */
|
|
dirty |= WM_DIRTY_LP_ALL;
|
|
}
|
|
|
|
/* LP1+ watermarks already deemed dirty, no need to continue */
|
|
if (dirty & WM_DIRTY_LP_ALL)
|
|
return dirty;
|
|
|
|
/* Find the lowest numbered LP1+ watermark in need of an update... */
|
|
for (wm_lp = 1; wm_lp <= 3; wm_lp++) {
|
|
if (old->wm_lp[wm_lp - 1] != new->wm_lp[wm_lp - 1] ||
|
|
old->wm_lp_spr[wm_lp - 1] != new->wm_lp_spr[wm_lp - 1])
|
|
break;
|
|
}
|
|
|
|
/* ...and mark it and all higher numbered LP1+ watermarks as dirty */
|
|
for (; wm_lp <= 3; wm_lp++)
|
|
dirty |= WM_DIRTY_LP(wm_lp);
|
|
|
|
return dirty;
|
|
}
|
|
|
|
static bool _ilk_disable_lp_wm(struct drm_i915_private *dev_priv,
|
|
unsigned int dirty)
|
|
{
|
|
struct ilk_wm_values *previous = &dev_priv->wm.hw;
|
|
bool changed = false;
|
|
|
|
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] & WM1_LP_SR_EN) {
|
|
previous->wm_lp[2] &= ~WM1_LP_SR_EN;
|
|
I915_WRITE(WM3_LP_ILK, previous->wm_lp[2]);
|
|
changed = true;
|
|
}
|
|
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] & WM1_LP_SR_EN) {
|
|
previous->wm_lp[1] &= ~WM1_LP_SR_EN;
|
|
I915_WRITE(WM2_LP_ILK, previous->wm_lp[1]);
|
|
changed = true;
|
|
}
|
|
if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] & WM1_LP_SR_EN) {
|
|
previous->wm_lp[0] &= ~WM1_LP_SR_EN;
|
|
I915_WRITE(WM1_LP_ILK, previous->wm_lp[0]);
|
|
changed = true;
|
|
}
|
|
|
|
/*
|
|
* Don't touch WM1S_LP_EN here.
|
|
* Doing so could cause underruns.
|
|
*/
|
|
|
|
return changed;
|
|
}
|
|
|
|
/*
|
|
* The spec says we shouldn't write when we don't need, because every write
|
|
* causes WMs to be re-evaluated, expending some power.
|
|
*/
|
|
static void ilk_write_wm_values(struct drm_i915_private *dev_priv,
|
|
struct ilk_wm_values *results)
|
|
{
|
|
struct ilk_wm_values *previous = &dev_priv->wm.hw;
|
|
unsigned int dirty;
|
|
uint32_t val;
|
|
|
|
dirty = ilk_compute_wm_dirty(dev_priv, previous, results);
|
|
if (!dirty)
|
|
return;
|
|
|
|
_ilk_disable_lp_wm(dev_priv, dirty);
|
|
|
|
if (dirty & WM_DIRTY_PIPE(PIPE_A))
|
|
I915_WRITE(WM0_PIPEA_ILK, results->wm_pipe[0]);
|
|
if (dirty & WM_DIRTY_PIPE(PIPE_B))
|
|
I915_WRITE(WM0_PIPEB_ILK, results->wm_pipe[1]);
|
|
if (dirty & WM_DIRTY_PIPE(PIPE_C))
|
|
I915_WRITE(WM0_PIPEC_IVB, results->wm_pipe[2]);
|
|
|
|
if (dirty & WM_DIRTY_LINETIME(PIPE_A))
|
|
I915_WRITE(PIPE_WM_LINETIME(PIPE_A), results->wm_linetime[0]);
|
|
if (dirty & WM_DIRTY_LINETIME(PIPE_B))
|
|
I915_WRITE(PIPE_WM_LINETIME(PIPE_B), results->wm_linetime[1]);
|
|
if (dirty & WM_DIRTY_LINETIME(PIPE_C))
|
|
I915_WRITE(PIPE_WM_LINETIME(PIPE_C), results->wm_linetime[2]);
|
|
|
|
if (dirty & WM_DIRTY_DDB) {
|
|
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
|
|
val = I915_READ(WM_MISC);
|
|
if (results->partitioning == INTEL_DDB_PART_1_2)
|
|
val &= ~WM_MISC_DATA_PARTITION_5_6;
|
|
else
|
|
val |= WM_MISC_DATA_PARTITION_5_6;
|
|
I915_WRITE(WM_MISC, val);
|
|
} else {
|
|
val = I915_READ(DISP_ARB_CTL2);
|
|
if (results->partitioning == INTEL_DDB_PART_1_2)
|
|
val &= ~DISP_DATA_PARTITION_5_6;
|
|
else
|
|
val |= DISP_DATA_PARTITION_5_6;
|
|
I915_WRITE(DISP_ARB_CTL2, val);
|
|
}
|
|
}
|
|
|
|
if (dirty & WM_DIRTY_FBC) {
|
|
val = I915_READ(DISP_ARB_CTL);
|
|
if (results->enable_fbc_wm)
|
|
val &= ~DISP_FBC_WM_DIS;
|
|
else
|
|
val |= DISP_FBC_WM_DIS;
|
|
I915_WRITE(DISP_ARB_CTL, val);
|
|
}
|
|
|
|
if (dirty & WM_DIRTY_LP(1) &&
|
|
previous->wm_lp_spr[0] != results->wm_lp_spr[0])
|
|
I915_WRITE(WM1S_LP_ILK, results->wm_lp_spr[0]);
|
|
|
|
if (INTEL_GEN(dev_priv) >= 7) {
|
|
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp_spr[1] != results->wm_lp_spr[1])
|
|
I915_WRITE(WM2S_LP_IVB, results->wm_lp_spr[1]);
|
|
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp_spr[2] != results->wm_lp_spr[2])
|
|
I915_WRITE(WM3S_LP_IVB, results->wm_lp_spr[2]);
|
|
}
|
|
|
|
if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] != results->wm_lp[0])
|
|
I915_WRITE(WM1_LP_ILK, results->wm_lp[0]);
|
|
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] != results->wm_lp[1])
|
|
I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
|
|
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2])
|
|
I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
|
|
|
|
dev_priv->wm.hw = *results;
|
|
}
|
|
|
|
bool ilk_disable_lp_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
|
|
return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL);
|
|
}
|
|
|
|
static u8 intel_enabled_dbuf_slices_num(struct drm_i915_private *dev_priv)
|
|
{
|
|
u8 enabled_slices;
|
|
|
|
/* Slice 1 will always be enabled */
|
|
enabled_slices = 1;
|
|
|
|
/* Gen prior to GEN11 have only one DBuf slice */
|
|
if (INTEL_GEN(dev_priv) < 11)
|
|
return enabled_slices;
|
|
|
|
if (I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE)
|
|
enabled_slices++;
|
|
|
|
return enabled_slices;
|
|
}
|
|
|
|
/*
|
|
* FIXME: We still don't have the proper code detect if we need to apply the WA,
|
|
* so assume we'll always need it in order to avoid underruns.
|
|
*/
|
|
static bool skl_needs_memory_bw_wa(struct intel_atomic_state *state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
|
|
|
|
if (IS_GEN9_BC(dev_priv) || IS_BROXTON(dev_priv))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool
|
|
intel_has_sagv(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv) ||
|
|
IS_CANNONLAKE(dev_priv))
|
|
return true;
|
|
|
|
if (IS_SKYLAKE(dev_priv) &&
|
|
dev_priv->sagv_status != I915_SAGV_NOT_CONTROLLED)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* SAGV dynamically adjusts the system agent voltage and clock frequencies
|
|
* depending on power and performance requirements. The display engine access
|
|
* to system memory is blocked during the adjustment time. Because of the
|
|
* blocking time, having this enabled can cause full system hangs and/or pipe
|
|
* underruns if we don't meet all of the following requirements:
|
|
*
|
|
* - <= 1 pipe enabled
|
|
* - All planes can enable watermarks for latencies >= SAGV engine block time
|
|
* - We're not using an interlaced display configuration
|
|
*/
|
|
int
|
|
intel_enable_sagv(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret;
|
|
|
|
if (!intel_has_sagv(dev_priv))
|
|
return 0;
|
|
|
|
if (dev_priv->sagv_status == I915_SAGV_ENABLED)
|
|
return 0;
|
|
|
|
DRM_DEBUG_KMS("Enabling the SAGV\n");
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
|
|
ret = sandybridge_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL,
|
|
GEN9_SAGV_ENABLE);
|
|
|
|
/* We don't need to wait for the SAGV when enabling */
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
|
|
/*
|
|
* Some skl systems, pre-release machines in particular,
|
|
* don't actually have an SAGV.
|
|
*/
|
|
if (IS_SKYLAKE(dev_priv) && ret == -ENXIO) {
|
|
DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n");
|
|
dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
|
|
return 0;
|
|
} else if (ret < 0) {
|
|
DRM_ERROR("Failed to enable the SAGV\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_priv->sagv_status = I915_SAGV_ENABLED;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
intel_disable_sagv(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret;
|
|
|
|
if (!intel_has_sagv(dev_priv))
|
|
return 0;
|
|
|
|
if (dev_priv->sagv_status == I915_SAGV_DISABLED)
|
|
return 0;
|
|
|
|
DRM_DEBUG_KMS("Disabling the SAGV\n");
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
|
|
/* bspec says to keep retrying for at least 1 ms */
|
|
ret = skl_pcode_request(dev_priv, GEN9_PCODE_SAGV_CONTROL,
|
|
GEN9_SAGV_DISABLE,
|
|
GEN9_SAGV_IS_DISABLED, GEN9_SAGV_IS_DISABLED,
|
|
1);
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
|
|
/*
|
|
* Some skl systems, pre-release machines in particular,
|
|
* don't actually have an SAGV.
|
|
*/
|
|
if (IS_SKYLAKE(dev_priv) && ret == -ENXIO) {
|
|
DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n");
|
|
dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
|
|
return 0;
|
|
} else if (ret < 0) {
|
|
DRM_ERROR("Failed to disable the SAGV (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_priv->sagv_status = I915_SAGV_DISABLED;
|
|
return 0;
|
|
}
|
|
|
|
bool intel_can_enable_sagv(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
|
|
struct intel_crtc *crtc;
|
|
struct intel_plane *plane;
|
|
struct intel_crtc_state *cstate;
|
|
enum pipe pipe;
|
|
int level, latency;
|
|
int sagv_block_time_us;
|
|
|
|
if (!intel_has_sagv(dev_priv))
|
|
return false;
|
|
|
|
if (IS_GEN9(dev_priv))
|
|
sagv_block_time_us = 30;
|
|
else if (IS_GEN10(dev_priv))
|
|
sagv_block_time_us = 20;
|
|
else
|
|
sagv_block_time_us = 10;
|
|
|
|
/*
|
|
* SKL+ workaround: bspec recommends we disable the SAGV when we have
|
|
* more then one pipe enabled
|
|
*
|
|
* If there are no active CRTCs, no additional checks need be performed
|
|
*/
|
|
if (hweight32(intel_state->active_crtcs) == 0)
|
|
return true;
|
|
else if (hweight32(intel_state->active_crtcs) > 1)
|
|
return false;
|
|
|
|
/* Since we're now guaranteed to only have one active CRTC... */
|
|
pipe = ffs(intel_state->active_crtcs) - 1;
|
|
crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
|
|
cstate = to_intel_crtc_state(crtc->base.state);
|
|
|
|
if (crtc->base.state->adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
|
|
return false;
|
|
|
|
for_each_intel_plane_on_crtc(dev, crtc, plane) {
|
|
struct skl_plane_wm *wm =
|
|
&cstate->wm.skl.optimal.planes[plane->id];
|
|
|
|
/* Skip this plane if it's not enabled */
|
|
if (!wm->wm[0].plane_en)
|
|
continue;
|
|
|
|
/* Find the highest enabled wm level for this plane */
|
|
for (level = ilk_wm_max_level(dev_priv);
|
|
!wm->wm[level].plane_en; --level)
|
|
{ }
|
|
|
|
latency = dev_priv->wm.skl_latency[level];
|
|
|
|
if (skl_needs_memory_bw_wa(intel_state) &&
|
|
plane->base.state->fb->modifier ==
|
|
I915_FORMAT_MOD_X_TILED)
|
|
latency += 15;
|
|
|
|
/*
|
|
* If any of the planes on this pipe don't enable wm levels that
|
|
* incur memory latencies higher than sagv_block_time_us we
|
|
* can't enable the SAGV.
|
|
*/
|
|
if (latency < sagv_block_time_us)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static unsigned int intel_get_ddb_size(struct drm_i915_private *dev_priv,
|
|
const struct intel_crtc_state *cstate,
|
|
const unsigned int total_data_rate,
|
|
const int num_active,
|
|
struct skl_ddb_allocation *ddb)
|
|
{
|
|
const struct drm_display_mode *adjusted_mode;
|
|
u64 total_data_bw;
|
|
u16 ddb_size = INTEL_INFO(dev_priv)->ddb_size;
|
|
|
|
WARN_ON(ddb_size == 0);
|
|
|
|
if (INTEL_GEN(dev_priv) < 11)
|
|
return ddb_size - 4; /* 4 blocks for bypass path allocation */
|
|
|
|
adjusted_mode = &cstate->base.adjusted_mode;
|
|
total_data_bw = (u64)total_data_rate * drm_mode_vrefresh(adjusted_mode);
|
|
|
|
/*
|
|
* 12GB/s is maximum BW supported by single DBuf slice.
|
|
*/
|
|
if (total_data_bw >= GBps(12) || num_active > 1) {
|
|
ddb->enabled_slices = 2;
|
|
} else {
|
|
ddb->enabled_slices = 1;
|
|
ddb_size /= 2;
|
|
}
|
|
|
|
return ddb_size;
|
|
}
|
|
|
|
static void
|
|
skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
|
|
const struct intel_crtc_state *cstate,
|
|
const unsigned int total_data_rate,
|
|
struct skl_ddb_allocation *ddb,
|
|
struct skl_ddb_entry *alloc, /* out */
|
|
int *num_active /* out */)
|
|
{
|
|
struct drm_atomic_state *state = cstate->base.state;
|
|
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct drm_crtc *for_crtc = cstate->base.crtc;
|
|
unsigned int pipe_size, ddb_size;
|
|
int nth_active_pipe;
|
|
|
|
if (WARN_ON(!state) || !cstate->base.active) {
|
|
alloc->start = 0;
|
|
alloc->end = 0;
|
|
*num_active = hweight32(dev_priv->active_crtcs);
|
|
return;
|
|
}
|
|
|
|
if (intel_state->active_pipe_changes)
|
|
*num_active = hweight32(intel_state->active_crtcs);
|
|
else
|
|
*num_active = hweight32(dev_priv->active_crtcs);
|
|
|
|
ddb_size = intel_get_ddb_size(dev_priv, cstate, total_data_rate,
|
|
*num_active, ddb);
|
|
|
|
/*
|
|
* If the state doesn't change the active CRTC's, then there's
|
|
* no need to recalculate; the existing pipe allocation limits
|
|
* should remain unchanged. Note that we're safe from racing
|
|
* commits since any racing commit that changes the active CRTC
|
|
* list would need to grab _all_ crtc locks, including the one
|
|
* we currently hold.
|
|
*/
|
|
if (!intel_state->active_pipe_changes) {
|
|
/*
|
|
* alloc may be cleared by clear_intel_crtc_state,
|
|
* copy from old state to be sure
|
|
*/
|
|
*alloc = to_intel_crtc_state(for_crtc->state)->wm.skl.ddb;
|
|
return;
|
|
}
|
|
|
|
nth_active_pipe = hweight32(intel_state->active_crtcs &
|
|
(drm_crtc_mask(for_crtc) - 1));
|
|
pipe_size = ddb_size / hweight32(intel_state->active_crtcs);
|
|
alloc->start = nth_active_pipe * ddb_size / *num_active;
|
|
alloc->end = alloc->start + pipe_size;
|
|
}
|
|
|
|
static unsigned int skl_cursor_allocation(int num_active)
|
|
{
|
|
if (num_active == 1)
|
|
return 32;
|
|
|
|
return 8;
|
|
}
|
|
|
|
static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
|
|
struct skl_ddb_entry *entry, u32 reg)
|
|
{
|
|
u16 mask;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11)
|
|
mask = ICL_DDB_ENTRY_MASK;
|
|
else
|
|
mask = SKL_DDB_ENTRY_MASK;
|
|
entry->start = reg & mask;
|
|
entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
|
|
|
|
if (entry->end)
|
|
entry->end += 1;
|
|
}
|
|
|
|
static void
|
|
skl_ddb_get_hw_plane_state(struct drm_i915_private *dev_priv,
|
|
const enum pipe pipe,
|
|
const enum plane_id plane_id,
|
|
struct skl_ddb_allocation *ddb /* out */)
|
|
{
|
|
u32 val, val2 = 0;
|
|
int fourcc, pixel_format;
|
|
|
|
/* Cursor doesn't support NV12/planar, so no extra calculation needed */
|
|
if (plane_id == PLANE_CURSOR) {
|
|
val = I915_READ(CUR_BUF_CFG(pipe));
|
|
skl_ddb_entry_init_from_hw(dev_priv,
|
|
&ddb->plane[pipe][plane_id], val);
|
|
return;
|
|
}
|
|
|
|
val = I915_READ(PLANE_CTL(pipe, plane_id));
|
|
|
|
/* No DDB allocated for disabled planes */
|
|
if (!(val & PLANE_CTL_ENABLE))
|
|
return;
|
|
|
|
pixel_format = val & PLANE_CTL_FORMAT_MASK;
|
|
fourcc = skl_format_to_fourcc(pixel_format,
|
|
val & PLANE_CTL_ORDER_RGBX,
|
|
val & PLANE_CTL_ALPHA_MASK);
|
|
|
|
val = I915_READ(PLANE_BUF_CFG(pipe, plane_id));
|
|
val2 = I915_READ(PLANE_NV12_BUF_CFG(pipe, plane_id));
|
|
|
|
if (fourcc == DRM_FORMAT_NV12) {
|
|
skl_ddb_entry_init_from_hw(dev_priv,
|
|
&ddb->plane[pipe][plane_id], val2);
|
|
skl_ddb_entry_init_from_hw(dev_priv,
|
|
&ddb->uv_plane[pipe][plane_id], val);
|
|
} else {
|
|
skl_ddb_entry_init_from_hw(dev_priv,
|
|
&ddb->plane[pipe][plane_id], val);
|
|
}
|
|
}
|
|
|
|
void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
|
|
struct skl_ddb_allocation *ddb /* out */)
|
|
{
|
|
struct intel_crtc *crtc;
|
|
|
|
memset(ddb, 0, sizeof(*ddb));
|
|
|
|
ddb->enabled_slices = intel_enabled_dbuf_slices_num(dev_priv);
|
|
|
|
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
|
enum intel_display_power_domain power_domain;
|
|
enum plane_id plane_id;
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
power_domain = POWER_DOMAIN_PIPE(pipe);
|
|
if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
|
|
continue;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id)
|
|
skl_ddb_get_hw_plane_state(dev_priv, pipe,
|
|
plane_id, ddb);
|
|
|
|
intel_display_power_put(dev_priv, power_domain);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Determines the downscale amount of a plane for the purposes of watermark calculations.
|
|
* The bspec defines downscale amount as:
|
|
*
|
|
* """
|
|
* Horizontal down scale amount = maximum[1, Horizontal source size /
|
|
* Horizontal destination size]
|
|
* Vertical down scale amount = maximum[1, Vertical source size /
|
|
* Vertical destination size]
|
|
* Total down scale amount = Horizontal down scale amount *
|
|
* Vertical down scale amount
|
|
* """
|
|
*
|
|
* Return value is provided in 16.16 fixed point form to retain fractional part.
|
|
* Caller should take care of dividing & rounding off the value.
|
|
*/
|
|
static uint_fixed_16_16_t
|
|
skl_plane_downscale_amount(const struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *pstate)
|
|
{
|
|
struct intel_plane *plane = to_intel_plane(pstate->base.plane);
|
|
uint32_t src_w, src_h, dst_w, dst_h;
|
|
uint_fixed_16_16_t fp_w_ratio, fp_h_ratio;
|
|
uint_fixed_16_16_t downscale_h, downscale_w;
|
|
|
|
if (WARN_ON(!intel_wm_plane_visible(cstate, pstate)))
|
|
return u32_to_fixed16(0);
|
|
|
|
/* n.b., src is 16.16 fixed point, dst is whole integer */
|
|
if (plane->id == PLANE_CURSOR) {
|
|
/*
|
|
* Cursors only support 0/180 degree rotation,
|
|
* hence no need to account for rotation here.
|
|
*/
|
|
src_w = pstate->base.src_w >> 16;
|
|
src_h = pstate->base.src_h >> 16;
|
|
dst_w = pstate->base.crtc_w;
|
|
dst_h = pstate->base.crtc_h;
|
|
} else {
|
|
/*
|
|
* Src coordinates are already rotated by 270 degrees for
|
|
* the 90/270 degree plane rotation cases (to match the
|
|
* GTT mapping), hence no need to account for rotation here.
|
|
*/
|
|
src_w = drm_rect_width(&pstate->base.src) >> 16;
|
|
src_h = drm_rect_height(&pstate->base.src) >> 16;
|
|
dst_w = drm_rect_width(&pstate->base.dst);
|
|
dst_h = drm_rect_height(&pstate->base.dst);
|
|
}
|
|
|
|
fp_w_ratio = div_fixed16(src_w, dst_w);
|
|
fp_h_ratio = div_fixed16(src_h, dst_h);
|
|
downscale_w = max_fixed16(fp_w_ratio, u32_to_fixed16(1));
|
|
downscale_h = max_fixed16(fp_h_ratio, u32_to_fixed16(1));
|
|
|
|
return mul_fixed16(downscale_w, downscale_h);
|
|
}
|
|
|
|
static uint_fixed_16_16_t
|
|
skl_pipe_downscale_amount(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
uint_fixed_16_16_t pipe_downscale = u32_to_fixed16(1);
|
|
|
|
if (!crtc_state->base.enable)
|
|
return pipe_downscale;
|
|
|
|
if (crtc_state->pch_pfit.enabled) {
|
|
uint32_t src_w, src_h, dst_w, dst_h;
|
|
uint32_t pfit_size = crtc_state->pch_pfit.size;
|
|
uint_fixed_16_16_t fp_w_ratio, fp_h_ratio;
|
|
uint_fixed_16_16_t downscale_h, downscale_w;
|
|
|
|
src_w = crtc_state->pipe_src_w;
|
|
src_h = crtc_state->pipe_src_h;
|
|
dst_w = pfit_size >> 16;
|
|
dst_h = pfit_size & 0xffff;
|
|
|
|
if (!dst_w || !dst_h)
|
|
return pipe_downscale;
|
|
|
|
fp_w_ratio = div_fixed16(src_w, dst_w);
|
|
fp_h_ratio = div_fixed16(src_h, dst_h);
|
|
downscale_w = max_fixed16(fp_w_ratio, u32_to_fixed16(1));
|
|
downscale_h = max_fixed16(fp_h_ratio, u32_to_fixed16(1));
|
|
|
|
pipe_downscale = mul_fixed16(downscale_w, downscale_h);
|
|
}
|
|
|
|
return pipe_downscale;
|
|
}
|
|
|
|
int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *cstate)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
|
|
struct drm_crtc_state *crtc_state = &cstate->base;
|
|
struct drm_atomic_state *state = crtc_state->state;
|
|
struct drm_plane *plane;
|
|
const struct drm_plane_state *pstate;
|
|
struct intel_plane_state *intel_pstate;
|
|
int crtc_clock, dotclk;
|
|
uint32_t pipe_max_pixel_rate;
|
|
uint_fixed_16_16_t pipe_downscale;
|
|
uint_fixed_16_16_t max_downscale = u32_to_fixed16(1);
|
|
|
|
if (!cstate->base.enable)
|
|
return 0;
|
|
|
|
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
|
|
uint_fixed_16_16_t plane_downscale;
|
|
uint_fixed_16_16_t fp_9_div_8 = div_fixed16(9, 8);
|
|
int bpp;
|
|
|
|
if (!intel_wm_plane_visible(cstate,
|
|
to_intel_plane_state(pstate)))
|
|
continue;
|
|
|
|
if (WARN_ON(!pstate->fb))
|
|
return -EINVAL;
|
|
|
|
intel_pstate = to_intel_plane_state(pstate);
|
|
plane_downscale = skl_plane_downscale_amount(cstate,
|
|
intel_pstate);
|
|
bpp = pstate->fb->format->cpp[0] * 8;
|
|
if (bpp == 64)
|
|
plane_downscale = mul_fixed16(plane_downscale,
|
|
fp_9_div_8);
|
|
|
|
max_downscale = max_fixed16(plane_downscale, max_downscale);
|
|
}
|
|
pipe_downscale = skl_pipe_downscale_amount(cstate);
|
|
|
|
pipe_downscale = mul_fixed16(pipe_downscale, max_downscale);
|
|
|
|
crtc_clock = crtc_state->adjusted_mode.crtc_clock;
|
|
dotclk = to_intel_atomic_state(state)->cdclk.logical.cdclk;
|
|
|
|
if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
|
|
dotclk *= 2;
|
|
|
|
pipe_max_pixel_rate = div_round_up_u32_fixed16(dotclk, pipe_downscale);
|
|
|
|
if (pipe_max_pixel_rate < crtc_clock) {
|
|
DRM_DEBUG_KMS("Max supported pixel clock with scaling exceeded\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int
|
|
skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
|
|
const struct drm_plane_state *pstate,
|
|
const int plane)
|
|
{
|
|
struct intel_plane *intel_plane = to_intel_plane(pstate->plane);
|
|
struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
|
|
uint32_t data_rate;
|
|
uint32_t width = 0, height = 0;
|
|
struct drm_framebuffer *fb;
|
|
u32 format;
|
|
uint_fixed_16_16_t down_scale_amount;
|
|
|
|
if (!intel_pstate->base.visible)
|
|
return 0;
|
|
|
|
fb = pstate->fb;
|
|
format = fb->format->format;
|
|
|
|
if (intel_plane->id == PLANE_CURSOR)
|
|
return 0;
|
|
if (plane == 1 && format != DRM_FORMAT_NV12)
|
|
return 0;
|
|
|
|
/*
|
|
* Src coordinates are already rotated by 270 degrees for
|
|
* the 90/270 degree plane rotation cases (to match the
|
|
* GTT mapping), hence no need to account for rotation here.
|
|
*/
|
|
width = drm_rect_width(&intel_pstate->base.src) >> 16;
|
|
height = drm_rect_height(&intel_pstate->base.src) >> 16;
|
|
|
|
/* UV plane does 1/2 pixel sub-sampling */
|
|
if (plane == 1 && format == DRM_FORMAT_NV12) {
|
|
width /= 2;
|
|
height /= 2;
|
|
}
|
|
|
|
data_rate = width * height * fb->format->cpp[plane];
|
|
|
|
down_scale_amount = skl_plane_downscale_amount(cstate, intel_pstate);
|
|
|
|
return mul_round_up_u32_fixed16(data_rate, down_scale_amount);
|
|
}
|
|
|
|
/*
|
|
* We don't overflow 32 bits. Worst case is 3 planes enabled, each fetching
|
|
* a 8192x4096@32bpp framebuffer:
|
|
* 3 * 4096 * 8192 * 4 < 2^32
|
|
*/
|
|
static unsigned int
|
|
skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate,
|
|
unsigned int *plane_data_rate,
|
|
unsigned int *uv_plane_data_rate)
|
|
{
|
|
struct drm_crtc_state *cstate = &intel_cstate->base;
|
|
struct drm_atomic_state *state = cstate->state;
|
|
struct drm_plane *plane;
|
|
const struct drm_plane_state *pstate;
|
|
unsigned int total_data_rate = 0;
|
|
|
|
if (WARN_ON(!state))
|
|
return 0;
|
|
|
|
/* Calculate and cache data rate for each plane */
|
|
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, cstate) {
|
|
enum plane_id plane_id = to_intel_plane(plane)->id;
|
|
unsigned int rate;
|
|
|
|
/* packed/y */
|
|
rate = skl_plane_relative_data_rate(intel_cstate,
|
|
pstate, 0);
|
|
plane_data_rate[plane_id] = rate;
|
|
|
|
total_data_rate += rate;
|
|
|
|
/* uv-plane */
|
|
rate = skl_plane_relative_data_rate(intel_cstate,
|
|
pstate, 1);
|
|
uv_plane_data_rate[plane_id] = rate;
|
|
|
|
total_data_rate += rate;
|
|
}
|
|
|
|
return total_data_rate;
|
|
}
|
|
|
|
static uint16_t
|
|
skl_ddb_min_alloc(const struct drm_plane_state *pstate, const int plane)
|
|
{
|
|
struct drm_framebuffer *fb = pstate->fb;
|
|
struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
|
|
uint32_t src_w, src_h;
|
|
uint32_t min_scanlines = 8;
|
|
uint8_t plane_bpp;
|
|
|
|
if (WARN_ON(!fb))
|
|
return 0;
|
|
|
|
/* For packed formats, and uv-plane, return 0 */
|
|
if (plane == 1 && fb->format->format != DRM_FORMAT_NV12)
|
|
return 0;
|
|
|
|
/* For Non Y-tile return 8-blocks */
|
|
if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
|
|
fb->modifier != I915_FORMAT_MOD_Yf_TILED &&
|
|
fb->modifier != I915_FORMAT_MOD_Y_TILED_CCS &&
|
|
fb->modifier != I915_FORMAT_MOD_Yf_TILED_CCS)
|
|
return 8;
|
|
|
|
/*
|
|
* Src coordinates are already rotated by 270 degrees for
|
|
* the 90/270 degree plane rotation cases (to match the
|
|
* GTT mapping), hence no need to account for rotation here.
|
|
*/
|
|
src_w = drm_rect_width(&intel_pstate->base.src) >> 16;
|
|
src_h = drm_rect_height(&intel_pstate->base.src) >> 16;
|
|
|
|
/* Halve UV plane width and height for NV12 */
|
|
if (plane == 1) {
|
|
src_w /= 2;
|
|
src_h /= 2;
|
|
}
|
|
|
|
plane_bpp = fb->format->cpp[plane];
|
|
|
|
if (drm_rotation_90_or_270(pstate->rotation)) {
|
|
switch (plane_bpp) {
|
|
case 1:
|
|
min_scanlines = 32;
|
|
break;
|
|
case 2:
|
|
min_scanlines = 16;
|
|
break;
|
|
case 4:
|
|
min_scanlines = 8;
|
|
break;
|
|
case 8:
|
|
min_scanlines = 4;
|
|
break;
|
|
default:
|
|
WARN(1, "Unsupported pixel depth %u for rotation",
|
|
plane_bpp);
|
|
min_scanlines = 32;
|
|
}
|
|
}
|
|
|
|
return DIV_ROUND_UP((4 * src_w * plane_bpp), 512) * min_scanlines/4 + 3;
|
|
}
|
|
|
|
static void
|
|
skl_ddb_calc_min(const struct intel_crtc_state *cstate, int num_active,
|
|
uint16_t *minimum, uint16_t *uv_minimum)
|
|
{
|
|
const struct drm_plane_state *pstate;
|
|
struct drm_plane *plane;
|
|
|
|
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, &cstate->base) {
|
|
enum plane_id plane_id = to_intel_plane(plane)->id;
|
|
|
|
if (plane_id == PLANE_CURSOR)
|
|
continue;
|
|
|
|
if (!pstate->visible)
|
|
continue;
|
|
|
|
minimum[plane_id] = skl_ddb_min_alloc(pstate, 0);
|
|
uv_minimum[plane_id] = skl_ddb_min_alloc(pstate, 1);
|
|
}
|
|
|
|
minimum[PLANE_CURSOR] = skl_cursor_allocation(num_active);
|
|
}
|
|
|
|
static int
|
|
skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
|
|
struct skl_ddb_allocation *ddb /* out */)
|
|
{
|
|
struct drm_atomic_state *state = cstate->base.state;
|
|
struct drm_crtc *crtc = cstate->base.crtc;
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
struct skl_ddb_entry *alloc = &cstate->wm.skl.ddb;
|
|
uint16_t alloc_size, start;
|
|
uint16_t minimum[I915_MAX_PLANES] = {};
|
|
uint16_t uv_minimum[I915_MAX_PLANES] = {};
|
|
unsigned int total_data_rate;
|
|
enum plane_id plane_id;
|
|
int num_active;
|
|
unsigned int plane_data_rate[I915_MAX_PLANES] = {};
|
|
unsigned int uv_plane_data_rate[I915_MAX_PLANES] = {};
|
|
uint16_t total_min_blocks = 0;
|
|
|
|
/* Clear the partitioning for disabled planes. */
|
|
memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe]));
|
|
memset(ddb->uv_plane[pipe], 0, sizeof(ddb->uv_plane[pipe]));
|
|
|
|
if (WARN_ON(!state))
|
|
return 0;
|
|
|
|
if (!cstate->base.active) {
|
|
alloc->start = alloc->end = 0;
|
|
return 0;
|
|
}
|
|
|
|
total_data_rate = skl_get_total_relative_data_rate(cstate,
|
|
plane_data_rate,
|
|
uv_plane_data_rate);
|
|
skl_ddb_get_pipe_allocation_limits(dev, cstate, total_data_rate, ddb,
|
|
alloc, &num_active);
|
|
alloc_size = skl_ddb_entry_size(alloc);
|
|
if (alloc_size == 0)
|
|
return 0;
|
|
|
|
skl_ddb_calc_min(cstate, num_active, minimum, uv_minimum);
|
|
|
|
/*
|
|
* 1. Allocate the mininum required blocks for each active plane
|
|
* and allocate the cursor, it doesn't require extra allocation
|
|
* proportional to the data rate.
|
|
*/
|
|
|
|
for_each_plane_id_on_crtc(intel_crtc, plane_id) {
|
|
total_min_blocks += minimum[plane_id];
|
|
total_min_blocks += uv_minimum[plane_id];
|
|
}
|
|
|
|
if (total_min_blocks > alloc_size) {
|
|
DRM_DEBUG_KMS("Requested display configuration exceeds system DDB limitations");
|
|
DRM_DEBUG_KMS("minimum required %d/%d\n", total_min_blocks,
|
|
alloc_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
alloc_size -= total_min_blocks;
|
|
ddb->plane[pipe][PLANE_CURSOR].start = alloc->end - minimum[PLANE_CURSOR];
|
|
ddb->plane[pipe][PLANE_CURSOR].end = alloc->end;
|
|
|
|
/*
|
|
* 2. Distribute the remaining space in proportion to the amount of
|
|
* data each plane needs to fetch from memory.
|
|
*
|
|
* FIXME: we may not allocate every single block here.
|
|
*/
|
|
if (total_data_rate == 0)
|
|
return 0;
|
|
|
|
start = alloc->start;
|
|
for_each_plane_id_on_crtc(intel_crtc, plane_id) {
|
|
unsigned int data_rate, uv_data_rate;
|
|
uint16_t plane_blocks, uv_plane_blocks;
|
|
|
|
if (plane_id == PLANE_CURSOR)
|
|
continue;
|
|
|
|
data_rate = plane_data_rate[plane_id];
|
|
|
|
/*
|
|
* allocation for (packed formats) or (uv-plane part of planar format):
|
|
* promote the expression to 64 bits to avoid overflowing, the
|
|
* result is < available as data_rate / total_data_rate < 1
|
|
*/
|
|
plane_blocks = minimum[plane_id];
|
|
plane_blocks += div_u64((uint64_t)alloc_size * data_rate,
|
|
total_data_rate);
|
|
|
|
/* Leave disabled planes at (0,0) */
|
|
if (data_rate) {
|
|
ddb->plane[pipe][plane_id].start = start;
|
|
ddb->plane[pipe][plane_id].end = start + plane_blocks;
|
|
}
|
|
|
|
start += plane_blocks;
|
|
|
|
/* Allocate DDB for UV plane for planar format/NV12 */
|
|
uv_data_rate = uv_plane_data_rate[plane_id];
|
|
|
|
uv_plane_blocks = uv_minimum[plane_id];
|
|
uv_plane_blocks += div_u64((uint64_t)alloc_size * uv_data_rate,
|
|
total_data_rate);
|
|
|
|
if (uv_data_rate) {
|
|
ddb->uv_plane[pipe][plane_id].start = start;
|
|
ddb->uv_plane[pipe][plane_id].end =
|
|
start + uv_plane_blocks;
|
|
}
|
|
|
|
start += uv_plane_blocks;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The max latency should be 257 (max the punit can code is 255 and we add 2us
|
|
* for the read latency) and cpp should always be <= 8, so that
|
|
* should allow pixel_rate up to ~2 GHz which seems sufficient since max
|
|
* 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
|
|
*/
|
|
static uint_fixed_16_16_t
|
|
skl_wm_method1(const struct drm_i915_private *dev_priv, uint32_t pixel_rate,
|
|
uint8_t cpp, uint32_t latency, uint32_t dbuf_block_size)
|
|
{
|
|
uint32_t wm_intermediate_val;
|
|
uint_fixed_16_16_t ret;
|
|
|
|
if (latency == 0)
|
|
return FP_16_16_MAX;
|
|
|
|
wm_intermediate_val = latency * pixel_rate * cpp;
|
|
ret = div_fixed16(wm_intermediate_val, 1000 * dbuf_block_size);
|
|
|
|
if (INTEL_GEN(dev_priv) >= 10)
|
|
ret = add_fixed16_u32(ret, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static uint_fixed_16_16_t skl_wm_method2(uint32_t pixel_rate,
|
|
uint32_t pipe_htotal,
|
|
uint32_t latency,
|
|
uint_fixed_16_16_t plane_blocks_per_line)
|
|
{
|
|
uint32_t wm_intermediate_val;
|
|
uint_fixed_16_16_t ret;
|
|
|
|
if (latency == 0)
|
|
return FP_16_16_MAX;
|
|
|
|
wm_intermediate_val = latency * pixel_rate;
|
|
wm_intermediate_val = DIV_ROUND_UP(wm_intermediate_val,
|
|
pipe_htotal * 1000);
|
|
ret = mul_u32_fixed16(wm_intermediate_val, plane_blocks_per_line);
|
|
return ret;
|
|
}
|
|
|
|
static uint_fixed_16_16_t
|
|
intel_get_linetime_us(struct intel_crtc_state *cstate)
|
|
{
|
|
uint32_t pixel_rate;
|
|
uint32_t crtc_htotal;
|
|
uint_fixed_16_16_t linetime_us;
|
|
|
|
if (!cstate->base.active)
|
|
return u32_to_fixed16(0);
|
|
|
|
pixel_rate = cstate->pixel_rate;
|
|
|
|
if (WARN_ON(pixel_rate == 0))
|
|
return u32_to_fixed16(0);
|
|
|
|
crtc_htotal = cstate->base.adjusted_mode.crtc_htotal;
|
|
linetime_us = div_fixed16(crtc_htotal * 1000, pixel_rate);
|
|
|
|
return linetime_us;
|
|
}
|
|
|
|
static uint32_t
|
|
skl_adjusted_plane_pixel_rate(const struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *pstate)
|
|
{
|
|
uint64_t adjusted_pixel_rate;
|
|
uint_fixed_16_16_t downscale_amount;
|
|
|
|
/* Shouldn't reach here on disabled planes... */
|
|
if (WARN_ON(!intel_wm_plane_visible(cstate, pstate)))
|
|
return 0;
|
|
|
|
/*
|
|
* Adjusted plane pixel rate is just the pipe's adjusted pixel rate
|
|
* with additional adjustments for plane-specific scaling.
|
|
*/
|
|
adjusted_pixel_rate = cstate->pixel_rate;
|
|
downscale_amount = skl_plane_downscale_amount(cstate, pstate);
|
|
|
|
return mul_round_up_u32_fixed16(adjusted_pixel_rate,
|
|
downscale_amount);
|
|
}
|
|
|
|
static int
|
|
skl_compute_plane_wm_params(const struct drm_i915_private *dev_priv,
|
|
struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *intel_pstate,
|
|
struct skl_wm_params *wp, int plane_id)
|
|
{
|
|
struct intel_plane *plane = to_intel_plane(intel_pstate->base.plane);
|
|
const struct drm_plane_state *pstate = &intel_pstate->base;
|
|
const struct drm_framebuffer *fb = pstate->fb;
|
|
uint32_t interm_pbpl;
|
|
struct intel_atomic_state *state =
|
|
to_intel_atomic_state(cstate->base.state);
|
|
bool apply_memory_bw_wa = skl_needs_memory_bw_wa(state);
|
|
|
|
if (!intel_wm_plane_visible(cstate, intel_pstate))
|
|
return 0;
|
|
|
|
/* only NV12 format has two planes */
|
|
if (plane_id == 1 && fb->format->format != DRM_FORMAT_NV12) {
|
|
DRM_DEBUG_KMS("Non NV12 format have single plane\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
wp->y_tiled = fb->modifier == I915_FORMAT_MOD_Y_TILED ||
|
|
fb->modifier == I915_FORMAT_MOD_Yf_TILED ||
|
|
fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
|
|
fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
|
|
wp->x_tiled = fb->modifier == I915_FORMAT_MOD_X_TILED;
|
|
wp->rc_surface = fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
|
|
fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
|
|
wp->is_planar = fb->format->format == DRM_FORMAT_NV12;
|
|
|
|
if (plane->id == PLANE_CURSOR) {
|
|
wp->width = intel_pstate->base.crtc_w;
|
|
} else {
|
|
/*
|
|
* Src coordinates are already rotated by 270 degrees for
|
|
* the 90/270 degree plane rotation cases (to match the
|
|
* GTT mapping), hence no need to account for rotation here.
|
|
*/
|
|
wp->width = drm_rect_width(&intel_pstate->base.src) >> 16;
|
|
}
|
|
|
|
if (plane_id == 1 && wp->is_planar)
|
|
wp->width /= 2;
|
|
|
|
wp->cpp = fb->format->cpp[plane_id];
|
|
wp->plane_pixel_rate = skl_adjusted_plane_pixel_rate(cstate,
|
|
intel_pstate);
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11 &&
|
|
fb->modifier == I915_FORMAT_MOD_Yf_TILED && wp->cpp == 8)
|
|
wp->dbuf_block_size = 256;
|
|
else
|
|
wp->dbuf_block_size = 512;
|
|
|
|
if (drm_rotation_90_or_270(pstate->rotation)) {
|
|
|
|
switch (wp->cpp) {
|
|
case 1:
|
|
wp->y_min_scanlines = 16;
|
|
break;
|
|
case 2:
|
|
wp->y_min_scanlines = 8;
|
|
break;
|
|
case 4:
|
|
wp->y_min_scanlines = 4;
|
|
break;
|
|
default:
|
|
MISSING_CASE(wp->cpp);
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
wp->y_min_scanlines = 4;
|
|
}
|
|
|
|
if (apply_memory_bw_wa)
|
|
wp->y_min_scanlines *= 2;
|
|
|
|
wp->plane_bytes_per_line = wp->width * wp->cpp;
|
|
if (wp->y_tiled) {
|
|
interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line *
|
|
wp->y_min_scanlines,
|
|
wp->dbuf_block_size);
|
|
|
|
if (INTEL_GEN(dev_priv) >= 10)
|
|
interm_pbpl++;
|
|
|
|
wp->plane_blocks_per_line = div_fixed16(interm_pbpl,
|
|
wp->y_min_scanlines);
|
|
} else if (wp->x_tiled && IS_GEN9(dev_priv)) {
|
|
interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line,
|
|
wp->dbuf_block_size);
|
|
wp->plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
|
|
} else {
|
|
interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line,
|
|
wp->dbuf_block_size) + 1;
|
|
wp->plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
|
|
}
|
|
|
|
wp->y_tile_minimum = mul_u32_fixed16(wp->y_min_scanlines,
|
|
wp->plane_blocks_per_line);
|
|
wp->linetime_us = fixed16_to_u32_round_up(
|
|
intel_get_linetime_us(cstate));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
|
|
struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *intel_pstate,
|
|
uint16_t ddb_allocation,
|
|
int level,
|
|
const struct skl_wm_params *wp,
|
|
const struct skl_wm_level *result_prev,
|
|
struct skl_wm_level *result /* out */)
|
|
{
|
|
const struct drm_plane_state *pstate = &intel_pstate->base;
|
|
uint32_t latency = dev_priv->wm.skl_latency[level];
|
|
uint_fixed_16_16_t method1, method2;
|
|
uint_fixed_16_16_t selected_result;
|
|
uint32_t res_blocks, res_lines;
|
|
struct intel_atomic_state *state =
|
|
to_intel_atomic_state(cstate->base.state);
|
|
bool apply_memory_bw_wa = skl_needs_memory_bw_wa(state);
|
|
uint32_t min_disp_buf_needed;
|
|
|
|
if (latency == 0 ||
|
|
!intel_wm_plane_visible(cstate, intel_pstate)) {
|
|
result->plane_en = false;
|
|
return 0;
|
|
}
|
|
|
|
/* Display WA #1141: kbl,cfl */
|
|
if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv) ||
|
|
IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0)) &&
|
|
dev_priv->ipc_enabled)
|
|
latency += 4;
|
|
|
|
if (apply_memory_bw_wa && wp->x_tiled)
|
|
latency += 15;
|
|
|
|
method1 = skl_wm_method1(dev_priv, wp->plane_pixel_rate,
|
|
wp->cpp, latency, wp->dbuf_block_size);
|
|
method2 = skl_wm_method2(wp->plane_pixel_rate,
|
|
cstate->base.adjusted_mode.crtc_htotal,
|
|
latency,
|
|
wp->plane_blocks_per_line);
|
|
|
|
if (wp->y_tiled) {
|
|
selected_result = max_fixed16(method2, wp->y_tile_minimum);
|
|
} else {
|
|
if ((wp->cpp * cstate->base.adjusted_mode.crtc_htotal /
|
|
wp->dbuf_block_size < 1) &&
|
|
(wp->plane_bytes_per_line / wp->dbuf_block_size < 1))
|
|
selected_result = method2;
|
|
else if (ddb_allocation >=
|
|
fixed16_to_u32_round_up(wp->plane_blocks_per_line))
|
|
selected_result = min_fixed16(method1, method2);
|
|
else if (latency >= wp->linetime_us)
|
|
selected_result = min_fixed16(method1, method2);
|
|
else
|
|
selected_result = method1;
|
|
}
|
|
|
|
res_blocks = fixed16_to_u32_round_up(selected_result) + 1;
|
|
res_lines = div_round_up_fixed16(selected_result,
|
|
wp->plane_blocks_per_line);
|
|
|
|
/* Display WA #1125: skl,bxt,kbl,glk */
|
|
if (level == 0 && wp->rc_surface)
|
|
res_blocks += fixed16_to_u32_round_up(wp->y_tile_minimum);
|
|
|
|
/* Display WA #1126: skl,bxt,kbl,glk */
|
|
if (level >= 1 && level <= 7) {
|
|
if (wp->y_tiled) {
|
|
res_blocks += fixed16_to_u32_round_up(
|
|
wp->y_tile_minimum);
|
|
res_lines += wp->y_min_scanlines;
|
|
} else {
|
|
res_blocks++;
|
|
}
|
|
|
|
/*
|
|
* Make sure result blocks for higher latency levels are atleast
|
|
* as high as level below the current level.
|
|
* Assumption in DDB algorithm optimization for special cases.
|
|
* Also covers Display WA #1125 for RC.
|
|
*/
|
|
if (result_prev->plane_res_b > res_blocks)
|
|
res_blocks = result_prev->plane_res_b;
|
|
}
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11) {
|
|
if (wp->y_tiled) {
|
|
uint32_t extra_lines;
|
|
uint_fixed_16_16_t fp_min_disp_buf_needed;
|
|
|
|
if (res_lines % wp->y_min_scanlines == 0)
|
|
extra_lines = wp->y_min_scanlines;
|
|
else
|
|
extra_lines = wp->y_min_scanlines * 2 -
|
|
res_lines % wp->y_min_scanlines;
|
|
|
|
fp_min_disp_buf_needed = mul_u32_fixed16(res_lines +
|
|
extra_lines,
|
|
wp->plane_blocks_per_line);
|
|
min_disp_buf_needed = fixed16_to_u32_round_up(
|
|
fp_min_disp_buf_needed);
|
|
} else {
|
|
min_disp_buf_needed = DIV_ROUND_UP(res_blocks * 11, 10);
|
|
}
|
|
} else {
|
|
min_disp_buf_needed = res_blocks;
|
|
}
|
|
|
|
if ((level > 0 && res_lines > 31) ||
|
|
res_blocks >= ddb_allocation ||
|
|
min_disp_buf_needed >= ddb_allocation) {
|
|
result->plane_en = false;
|
|
|
|
/*
|
|
* If there are no valid level 0 watermarks, then we can't
|
|
* support this display configuration.
|
|
*/
|
|
if (level) {
|
|
return 0;
|
|
} else {
|
|
struct drm_plane *plane = pstate->plane;
|
|
|
|
DRM_DEBUG_KMS("Requested display configuration exceeds system watermark limitations\n");
|
|
DRM_DEBUG_KMS("[PLANE:%d:%s] blocks required = %u/%u, lines required = %u/31\n",
|
|
plane->base.id, plane->name,
|
|
res_blocks, ddb_allocation, res_lines);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Display WA #826 (SKL:ALL, BXT:ALL) & #1059 (CNL:A)
|
|
* disable wm level 1-7 on NV12 planes
|
|
*/
|
|
if (wp->is_planar && level >= 1 &&
|
|
(IS_SKYLAKE(dev_priv) || IS_BROXTON(dev_priv) ||
|
|
IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_A0))) {
|
|
result->plane_en = false;
|
|
return 0;
|
|
}
|
|
|
|
/* The number of lines are ignored for the level 0 watermark. */
|
|
result->plane_res_b = res_blocks;
|
|
result->plane_res_l = res_lines;
|
|
result->plane_en = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
skl_compute_wm_levels(const struct drm_i915_private *dev_priv,
|
|
struct skl_ddb_allocation *ddb,
|
|
struct intel_crtc_state *cstate,
|
|
const struct intel_plane_state *intel_pstate,
|
|
const struct skl_wm_params *wm_params,
|
|
struct skl_plane_wm *wm,
|
|
int plane_id)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
|
|
struct drm_plane *plane = intel_pstate->base.plane;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
uint16_t ddb_blocks;
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
int level, max_level = ilk_wm_max_level(dev_priv);
|
|
enum plane_id intel_plane_id = intel_plane->id;
|
|
int ret;
|
|
|
|
if (WARN_ON(!intel_pstate->base.fb))
|
|
return -EINVAL;
|
|
|
|
ddb_blocks = plane_id ?
|
|
skl_ddb_entry_size(&ddb->uv_plane[pipe][intel_plane_id]) :
|
|
skl_ddb_entry_size(&ddb->plane[pipe][intel_plane_id]);
|
|
|
|
for (level = 0; level <= max_level; level++) {
|
|
struct skl_wm_level *result = plane_id ? &wm->uv_wm[level] :
|
|
&wm->wm[level];
|
|
struct skl_wm_level *result_prev;
|
|
|
|
if (level)
|
|
result_prev = plane_id ? &wm->uv_wm[level - 1] :
|
|
&wm->wm[level - 1];
|
|
else
|
|
result_prev = plane_id ? &wm->uv_wm[0] : &wm->wm[0];
|
|
|
|
ret = skl_compute_plane_wm(dev_priv,
|
|
cstate,
|
|
intel_pstate,
|
|
ddb_blocks,
|
|
level,
|
|
wm_params,
|
|
result_prev,
|
|
result);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (intel_pstate->base.fb->format->format == DRM_FORMAT_NV12)
|
|
wm->is_planar = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t
|
|
skl_compute_linetime_wm(struct intel_crtc_state *cstate)
|
|
{
|
|
struct drm_atomic_state *state = cstate->base.state;
|
|
struct drm_i915_private *dev_priv = to_i915(state->dev);
|
|
uint_fixed_16_16_t linetime_us;
|
|
uint32_t linetime_wm;
|
|
|
|
linetime_us = intel_get_linetime_us(cstate);
|
|
|
|
if (is_fixed16_zero(linetime_us))
|
|
return 0;
|
|
|
|
linetime_wm = fixed16_to_u32_round_up(mul_u32_fixed16(8, linetime_us));
|
|
|
|
/* Display WA #1135: bxt:ALL GLK:ALL */
|
|
if ((IS_BROXTON(dev_priv) || IS_GEMINILAKE(dev_priv)) &&
|
|
dev_priv->ipc_enabled)
|
|
linetime_wm /= 2;
|
|
|
|
return linetime_wm;
|
|
}
|
|
|
|
static void skl_compute_transition_wm(struct intel_crtc_state *cstate,
|
|
struct skl_wm_params *wp,
|
|
struct skl_wm_level *wm_l0,
|
|
uint16_t ddb_allocation,
|
|
struct skl_wm_level *trans_wm /* out */)
|
|
{
|
|
struct drm_device *dev = cstate->base.crtc->dev;
|
|
const struct drm_i915_private *dev_priv = to_i915(dev);
|
|
uint16_t trans_min, trans_y_tile_min;
|
|
const uint16_t trans_amount = 10; /* This is configurable amount */
|
|
uint16_t trans_offset_b, res_blocks;
|
|
|
|
if (!cstate->base.active)
|
|
goto exit;
|
|
|
|
/* Transition WM are not recommended by HW team for GEN9 */
|
|
if (INTEL_GEN(dev_priv) <= 9)
|
|
goto exit;
|
|
|
|
/* Transition WM don't make any sense if ipc is disabled */
|
|
if (!dev_priv->ipc_enabled)
|
|
goto exit;
|
|
|
|
trans_min = 0;
|
|
if (INTEL_GEN(dev_priv) >= 10)
|
|
trans_min = 4;
|
|
|
|
trans_offset_b = trans_min + trans_amount;
|
|
|
|
if (wp->y_tiled) {
|
|
trans_y_tile_min = (uint16_t) mul_round_up_u32_fixed16(2,
|
|
wp->y_tile_minimum);
|
|
res_blocks = max(wm_l0->plane_res_b, trans_y_tile_min) +
|
|
trans_offset_b;
|
|
} else {
|
|
res_blocks = wm_l0->plane_res_b + trans_offset_b;
|
|
|
|
/* WA BUG:1938466 add one block for non y-tile planes */
|
|
if (IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_A0))
|
|
res_blocks += 1;
|
|
|
|
}
|
|
|
|
res_blocks += 1;
|
|
|
|
if (res_blocks < ddb_allocation) {
|
|
trans_wm->plane_res_b = res_blocks;
|
|
trans_wm->plane_en = true;
|
|
return;
|
|
}
|
|
|
|
exit:
|
|
trans_wm->plane_en = false;
|
|
}
|
|
|
|
static int skl_build_pipe_wm(struct intel_crtc_state *cstate,
|
|
struct skl_ddb_allocation *ddb,
|
|
struct skl_pipe_wm *pipe_wm)
|
|
{
|
|
struct drm_device *dev = cstate->base.crtc->dev;
|
|
struct drm_crtc_state *crtc_state = &cstate->base;
|
|
const struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct drm_plane *plane;
|
|
const struct drm_plane_state *pstate;
|
|
struct skl_plane_wm *wm;
|
|
int ret;
|
|
|
|
/*
|
|
* We'll only calculate watermarks for planes that are actually
|
|
* enabled, so make sure all other planes are set as disabled.
|
|
*/
|
|
memset(pipe_wm->planes, 0, sizeof(pipe_wm->planes));
|
|
|
|
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
|
|
const struct intel_plane_state *intel_pstate =
|
|
to_intel_plane_state(pstate);
|
|
enum plane_id plane_id = to_intel_plane(plane)->id;
|
|
struct skl_wm_params wm_params;
|
|
enum pipe pipe = to_intel_crtc(cstate->base.crtc)->pipe;
|
|
uint16_t ddb_blocks;
|
|
|
|
wm = &pipe_wm->planes[plane_id];
|
|
ddb_blocks = skl_ddb_entry_size(&ddb->plane[pipe][plane_id]);
|
|
|
|
ret = skl_compute_plane_wm_params(dev_priv, cstate,
|
|
intel_pstate, &wm_params, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = skl_compute_wm_levels(dev_priv, ddb, cstate,
|
|
intel_pstate, &wm_params, wm, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
skl_compute_transition_wm(cstate, &wm_params, &wm->wm[0],
|
|
ddb_blocks, &wm->trans_wm);
|
|
|
|
/* uv plane watermarks must also be validated for NV12/Planar */
|
|
if (wm_params.is_planar) {
|
|
memset(&wm_params, 0, sizeof(struct skl_wm_params));
|
|
wm->is_planar = true;
|
|
|
|
ret = skl_compute_plane_wm_params(dev_priv, cstate,
|
|
intel_pstate,
|
|
&wm_params, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = skl_compute_wm_levels(dev_priv, ddb, cstate,
|
|
intel_pstate, &wm_params,
|
|
wm, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
pipe_wm->linetime = skl_compute_linetime_wm(cstate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void skl_ddb_entry_write(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg,
|
|
const struct skl_ddb_entry *entry)
|
|
{
|
|
if (entry->end)
|
|
I915_WRITE(reg, (entry->end - 1) << 16 | entry->start);
|
|
else
|
|
I915_WRITE(reg, 0);
|
|
}
|
|
|
|
static void skl_write_wm_level(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg,
|
|
const struct skl_wm_level *level)
|
|
{
|
|
uint32_t val = 0;
|
|
|
|
if (level->plane_en) {
|
|
val |= PLANE_WM_EN;
|
|
val |= level->plane_res_b;
|
|
val |= level->plane_res_l << PLANE_WM_LINES_SHIFT;
|
|
}
|
|
|
|
I915_WRITE(reg, val);
|
|
}
|
|
|
|
static void skl_write_plane_wm(struct intel_crtc *intel_crtc,
|
|
const struct skl_plane_wm *wm,
|
|
const struct skl_ddb_allocation *ddb,
|
|
enum plane_id plane_id)
|
|
{
|
|
struct drm_crtc *crtc = &intel_crtc->base;
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
int level, max_level = ilk_wm_max_level(dev_priv);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
|
|
for (level = 0; level <= max_level; level++) {
|
|
skl_write_wm_level(dev_priv, PLANE_WM(pipe, plane_id, level),
|
|
&wm->wm[level]);
|
|
}
|
|
skl_write_wm_level(dev_priv, PLANE_WM_TRANS(pipe, plane_id),
|
|
&wm->trans_wm);
|
|
|
|
skl_ddb_entry_write(dev_priv, PLANE_BUF_CFG(pipe, plane_id),
|
|
&ddb->plane[pipe][plane_id]);
|
|
if (INTEL_GEN(dev_priv) >= 11)
|
|
return skl_ddb_entry_write(dev_priv,
|
|
PLANE_BUF_CFG(pipe, plane_id),
|
|
&ddb->plane[pipe][plane_id]);
|
|
if (wm->is_planar) {
|
|
skl_ddb_entry_write(dev_priv, PLANE_BUF_CFG(pipe, plane_id),
|
|
&ddb->uv_plane[pipe][plane_id]);
|
|
skl_ddb_entry_write(dev_priv,
|
|
PLANE_NV12_BUF_CFG(pipe, plane_id),
|
|
&ddb->plane[pipe][plane_id]);
|
|
} else {
|
|
skl_ddb_entry_write(dev_priv, PLANE_BUF_CFG(pipe, plane_id),
|
|
&ddb->plane[pipe][plane_id]);
|
|
I915_WRITE(PLANE_NV12_BUF_CFG(pipe, plane_id), 0x0);
|
|
}
|
|
}
|
|
|
|
static void skl_write_cursor_wm(struct intel_crtc *intel_crtc,
|
|
const struct skl_plane_wm *wm,
|
|
const struct skl_ddb_allocation *ddb)
|
|
{
|
|
struct drm_crtc *crtc = &intel_crtc->base;
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
int level, max_level = ilk_wm_max_level(dev_priv);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
|
|
for (level = 0; level <= max_level; level++) {
|
|
skl_write_wm_level(dev_priv, CUR_WM(pipe, level),
|
|
&wm->wm[level]);
|
|
}
|
|
skl_write_wm_level(dev_priv, CUR_WM_TRANS(pipe), &wm->trans_wm);
|
|
|
|
skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe),
|
|
&ddb->plane[pipe][PLANE_CURSOR]);
|
|
}
|
|
|
|
bool skl_wm_level_equals(const struct skl_wm_level *l1,
|
|
const struct skl_wm_level *l2)
|
|
{
|
|
if (l1->plane_en != l2->plane_en)
|
|
return false;
|
|
|
|
/* If both planes aren't enabled, the rest shouldn't matter */
|
|
if (!l1->plane_en)
|
|
return true;
|
|
|
|
return (l1->plane_res_l == l2->plane_res_l &&
|
|
l1->plane_res_b == l2->plane_res_b);
|
|
}
|
|
|
|
static inline bool skl_ddb_entries_overlap(const struct skl_ddb_entry *a,
|
|
const struct skl_ddb_entry *b)
|
|
{
|
|
return a->start < b->end && b->start < a->end;
|
|
}
|
|
|
|
bool skl_ddb_allocation_overlaps(struct drm_i915_private *dev_priv,
|
|
const struct skl_ddb_entry **entries,
|
|
const struct skl_ddb_entry *ddb,
|
|
int ignore)
|
|
{
|
|
enum pipe pipe;
|
|
|
|
for_each_pipe(dev_priv, pipe) {
|
|
if (pipe != ignore && entries[pipe] &&
|
|
skl_ddb_entries_overlap(ddb, entries[pipe]))
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int skl_update_pipe_wm(struct drm_crtc_state *cstate,
|
|
const struct skl_pipe_wm *old_pipe_wm,
|
|
struct skl_pipe_wm *pipe_wm, /* out */
|
|
struct skl_ddb_allocation *ddb, /* out */
|
|
bool *changed /* out */)
|
|
{
|
|
struct intel_crtc_state *intel_cstate = to_intel_crtc_state(cstate);
|
|
int ret;
|
|
|
|
ret = skl_build_pipe_wm(intel_cstate, ddb, pipe_wm);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!memcmp(old_pipe_wm, pipe_wm, sizeof(*pipe_wm)))
|
|
*changed = false;
|
|
else
|
|
*changed = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t
|
|
pipes_modified(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
struct drm_crtc_state *cstate;
|
|
uint32_t i, ret = 0;
|
|
|
|
for_each_new_crtc_in_state(state, crtc, cstate, i)
|
|
ret |= drm_crtc_mask(crtc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
skl_ddb_add_affected_planes(struct intel_crtc_state *cstate)
|
|
{
|
|
struct drm_atomic_state *state = cstate->base.state;
|
|
struct drm_device *dev = state->dev;
|
|
struct drm_crtc *crtc = cstate->base.crtc;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
|
|
struct skl_ddb_allocation *new_ddb = &intel_state->wm_results.ddb;
|
|
struct skl_ddb_allocation *cur_ddb = &dev_priv->wm.skl_hw.ddb;
|
|
struct drm_plane_state *plane_state;
|
|
struct drm_plane *plane;
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
|
|
drm_for_each_plane_mask(plane, dev, cstate->base.plane_mask) {
|
|
enum plane_id plane_id = to_intel_plane(plane)->id;
|
|
|
|
if (skl_ddb_entry_equal(&cur_ddb->plane[pipe][plane_id],
|
|
&new_ddb->plane[pipe][plane_id]) &&
|
|
skl_ddb_entry_equal(&cur_ddb->uv_plane[pipe][plane_id],
|
|
&new_ddb->uv_plane[pipe][plane_id]))
|
|
continue;
|
|
|
|
plane_state = drm_atomic_get_plane_state(state, plane);
|
|
if (IS_ERR(plane_state))
|
|
return PTR_ERR(plane_state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
skl_compute_ddb(struct drm_atomic_state *state)
|
|
{
|
|
const struct drm_i915_private *dev_priv = to_i915(state->dev);
|
|
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
|
|
struct skl_ddb_allocation *ddb = &intel_state->wm_results.ddb;
|
|
struct intel_crtc *crtc;
|
|
struct intel_crtc_state *cstate;
|
|
int ret, i;
|
|
|
|
memcpy(ddb, &dev_priv->wm.skl_hw.ddb, sizeof(*ddb));
|
|
|
|
for_each_new_intel_crtc_in_state(intel_state, crtc, cstate, i) {
|
|
ret = skl_allocate_pipe_ddb(cstate, ddb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = skl_ddb_add_affected_planes(cstate);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
skl_copy_ddb_for_pipe(struct skl_ddb_values *dst,
|
|
struct skl_ddb_values *src,
|
|
enum pipe pipe)
|
|
{
|
|
memcpy(dst->ddb.uv_plane[pipe], src->ddb.uv_plane[pipe],
|
|
sizeof(dst->ddb.uv_plane[pipe]));
|
|
memcpy(dst->ddb.plane[pipe], src->ddb.plane[pipe],
|
|
sizeof(dst->ddb.plane[pipe]));
|
|
}
|
|
|
|
static void
|
|
skl_print_wm_changes(const struct drm_atomic_state *state)
|
|
{
|
|
const struct drm_device *dev = state->dev;
|
|
const struct drm_i915_private *dev_priv = to_i915(dev);
|
|
const struct intel_atomic_state *intel_state =
|
|
to_intel_atomic_state(state);
|
|
const struct drm_crtc *crtc;
|
|
const struct drm_crtc_state *cstate;
|
|
const struct intel_plane *intel_plane;
|
|
const struct skl_ddb_allocation *old_ddb = &dev_priv->wm.skl_hw.ddb;
|
|
const struct skl_ddb_allocation *new_ddb = &intel_state->wm_results.ddb;
|
|
int i;
|
|
|
|
for_each_new_crtc_in_state(state, crtc, cstate, i) {
|
|
const struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
|
|
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
|
|
enum plane_id plane_id = intel_plane->id;
|
|
const struct skl_ddb_entry *old, *new;
|
|
|
|
old = &old_ddb->plane[pipe][plane_id];
|
|
new = &new_ddb->plane[pipe][plane_id];
|
|
|
|
if (skl_ddb_entry_equal(old, new))
|
|
continue;
|
|
|
|
DRM_DEBUG_ATOMIC("[PLANE:%d:%s] ddb (%d - %d) -> (%d - %d)\n",
|
|
intel_plane->base.base.id,
|
|
intel_plane->base.name,
|
|
old->start, old->end,
|
|
new->start, new->end);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
skl_ddb_add_affected_pipes(struct drm_atomic_state *state, bool *changed)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
const struct drm_i915_private *dev_priv = to_i915(dev);
|
|
const struct drm_crtc *crtc;
|
|
const struct drm_crtc_state *cstate;
|
|
struct intel_crtc *intel_crtc;
|
|
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
|
|
uint32_t realloc_pipes = pipes_modified(state);
|
|
int ret, i;
|
|
|
|
/*
|
|
* When we distrust bios wm we always need to recompute to set the
|
|
* expected DDB allocations for each CRTC.
|
|
*/
|
|
if (dev_priv->wm.distrust_bios_wm)
|
|
(*changed) = true;
|
|
|
|
/*
|
|
* If this transaction isn't actually touching any CRTC's, don't
|
|
* bother with watermark calculation. Note that if we pass this
|
|
* test, we're guaranteed to hold at least one CRTC state mutex,
|
|
* which means we can safely use values like dev_priv->active_crtcs
|
|
* since any racing commits that want to update them would need to
|
|
* hold _all_ CRTC state mutexes.
|
|
*/
|
|
for_each_new_crtc_in_state(state, crtc, cstate, i)
|
|
(*changed) = true;
|
|
|
|
if (!*changed)
|
|
return 0;
|
|
|
|
/*
|
|
* If this is our first atomic update following hardware readout,
|
|
* we can't trust the DDB that the BIOS programmed for us. Let's
|
|
* pretend that all pipes switched active status so that we'll
|
|
* ensure a full DDB recompute.
|
|
*/
|
|
if (dev_priv->wm.distrust_bios_wm) {
|
|
ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
|
|
state->acquire_ctx);
|
|
if (ret)
|
|
return ret;
|
|
|
|
intel_state->active_pipe_changes = ~0;
|
|
|
|
/*
|
|
* We usually only initialize intel_state->active_crtcs if we
|
|
* we're doing a modeset; make sure this field is always
|
|
* initialized during the sanitization process that happens
|
|
* on the first commit too.
|
|
*/
|
|
if (!intel_state->modeset)
|
|
intel_state->active_crtcs = dev_priv->active_crtcs;
|
|
}
|
|
|
|
/*
|
|
* If the modeset changes which CRTC's are active, we need to
|
|
* recompute the DDB allocation for *all* active pipes, even
|
|
* those that weren't otherwise being modified in any way by this
|
|
* atomic commit. Due to the shrinking of the per-pipe allocations
|
|
* when new active CRTC's are added, it's possible for a pipe that
|
|
* we were already using and aren't changing at all here to suddenly
|
|
* become invalid if its DDB needs exceeds its new allocation.
|
|
*
|
|
* Note that if we wind up doing a full DDB recompute, we can't let
|
|
* any other display updates race with this transaction, so we need
|
|
* to grab the lock on *all* CRTC's.
|
|
*/
|
|
if (intel_state->active_pipe_changes) {
|
|
realloc_pipes = ~0;
|
|
intel_state->wm_results.dirty_pipes = ~0;
|
|
}
|
|
|
|
/*
|
|
* We're not recomputing for the pipes not included in the commit, so
|
|
* make sure we start with the current state.
|
|
*/
|
|
for_each_intel_crtc_mask(dev, intel_crtc, realloc_pipes) {
|
|
struct intel_crtc_state *cstate;
|
|
|
|
cstate = intel_atomic_get_crtc_state(state, intel_crtc);
|
|
if (IS_ERR(cstate))
|
|
return PTR_ERR(cstate);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
skl_compute_wm(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
struct drm_crtc_state *cstate;
|
|
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
|
|
struct skl_ddb_values *results = &intel_state->wm_results;
|
|
struct skl_pipe_wm *pipe_wm;
|
|
bool changed = false;
|
|
int ret, i;
|
|
|
|
/* Clear all dirty flags */
|
|
results->dirty_pipes = 0;
|
|
|
|
ret = skl_ddb_add_affected_pipes(state, &changed);
|
|
if (ret || !changed)
|
|
return ret;
|
|
|
|
ret = skl_compute_ddb(state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Calculate WM's for all pipes that are part of this transaction.
|
|
* Note that the DDB allocation above may have added more CRTC's that
|
|
* weren't otherwise being modified (and set bits in dirty_pipes) if
|
|
* pipe allocations had to change.
|
|
*
|
|
* FIXME: Now that we're doing this in the atomic check phase, we
|
|
* should allow skl_update_pipe_wm() to return failure in cases where
|
|
* no suitable watermark values can be found.
|
|
*/
|
|
for_each_new_crtc_in_state(state, crtc, cstate, i) {
|
|
struct intel_crtc_state *intel_cstate =
|
|
to_intel_crtc_state(cstate);
|
|
const struct skl_pipe_wm *old_pipe_wm =
|
|
&to_intel_crtc_state(crtc->state)->wm.skl.optimal;
|
|
|
|
pipe_wm = &intel_cstate->wm.skl.optimal;
|
|
ret = skl_update_pipe_wm(cstate, old_pipe_wm, pipe_wm,
|
|
&results->ddb, &changed);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (changed)
|
|
results->dirty_pipes |= drm_crtc_mask(crtc);
|
|
|
|
if ((results->dirty_pipes & drm_crtc_mask(crtc)) == 0)
|
|
/* This pipe's WM's did not change */
|
|
continue;
|
|
|
|
intel_cstate->update_wm_pre = true;
|
|
}
|
|
|
|
skl_print_wm_changes(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void skl_atomic_update_crtc_wm(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *cstate)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(cstate->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
|
|
struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal;
|
|
const struct skl_ddb_allocation *ddb = &state->wm_results.ddb;
|
|
enum pipe pipe = crtc->pipe;
|
|
enum plane_id plane_id;
|
|
|
|
if (!(state->wm_results.dirty_pipes & drm_crtc_mask(&crtc->base)))
|
|
return;
|
|
|
|
I915_WRITE(PIPE_WM_LINETIME(pipe), pipe_wm->linetime);
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id) {
|
|
if (plane_id != PLANE_CURSOR)
|
|
skl_write_plane_wm(crtc, &pipe_wm->planes[plane_id],
|
|
ddb, plane_id);
|
|
else
|
|
skl_write_cursor_wm(crtc, &pipe_wm->planes[plane_id],
|
|
ddb);
|
|
}
|
|
}
|
|
|
|
static void skl_initial_wm(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *cstate)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct skl_ddb_values *results = &state->wm_results;
|
|
struct skl_ddb_values *hw_vals = &dev_priv->wm.skl_hw;
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
|
|
if ((results->dirty_pipes & drm_crtc_mask(&intel_crtc->base)) == 0)
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
|
|
if (cstate->base.active_changed)
|
|
skl_atomic_update_crtc_wm(state, cstate);
|
|
|
|
skl_copy_ddb_for_pipe(hw_vals, results, pipe);
|
|
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
static void ilk_compute_wm_config(struct drm_device *dev,
|
|
struct intel_wm_config *config)
|
|
{
|
|
struct intel_crtc *crtc;
|
|
|
|
/* Compute the currently _active_ config */
|
|
for_each_intel_crtc(dev, crtc) {
|
|
const struct intel_pipe_wm *wm = &crtc->wm.active.ilk;
|
|
|
|
if (!wm->pipe_enabled)
|
|
continue;
|
|
|
|
config->sprites_enabled |= wm->sprites_enabled;
|
|
config->sprites_scaled |= wm->sprites_scaled;
|
|
config->num_pipes_active++;
|
|
}
|
|
}
|
|
|
|
static void ilk_program_watermarks(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct intel_pipe_wm lp_wm_1_2 = {}, lp_wm_5_6 = {}, *best_lp_wm;
|
|
struct ilk_wm_maximums max;
|
|
struct intel_wm_config config = {};
|
|
struct ilk_wm_values results = {};
|
|
enum intel_ddb_partitioning partitioning;
|
|
|
|
ilk_compute_wm_config(dev, &config);
|
|
|
|
ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_1_2, &max);
|
|
ilk_wm_merge(dev, &config, &max, &lp_wm_1_2);
|
|
|
|
/* 5/6 split only in single pipe config on IVB+ */
|
|
if (INTEL_GEN(dev_priv) >= 7 &&
|
|
config.num_pipes_active == 1 && config.sprites_enabled) {
|
|
ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_5_6, &max);
|
|
ilk_wm_merge(dev, &config, &max, &lp_wm_5_6);
|
|
|
|
best_lp_wm = ilk_find_best_result(dev, &lp_wm_1_2, &lp_wm_5_6);
|
|
} else {
|
|
best_lp_wm = &lp_wm_1_2;
|
|
}
|
|
|
|
partitioning = (best_lp_wm == &lp_wm_1_2) ?
|
|
INTEL_DDB_PART_1_2 : INTEL_DDB_PART_5_6;
|
|
|
|
ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results);
|
|
|
|
ilk_write_wm_values(dev_priv, &results);
|
|
}
|
|
|
|
static void ilk_initial_watermarks(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *cstate)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
intel_crtc->wm.active.ilk = cstate->wm.ilk.intermediate;
|
|
ilk_program_watermarks(dev_priv);
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
static void ilk_optimize_watermarks(struct intel_atomic_state *state,
|
|
struct intel_crtc_state *cstate)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
if (cstate->wm.need_postvbl_update) {
|
|
intel_crtc->wm.active.ilk = cstate->wm.ilk.optimal;
|
|
ilk_program_watermarks(dev_priv);
|
|
}
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
static inline void skl_wm_level_from_reg_val(uint32_t val,
|
|
struct skl_wm_level *level)
|
|
{
|
|
level->plane_en = val & PLANE_WM_EN;
|
|
level->plane_res_b = val & PLANE_WM_BLOCKS_MASK;
|
|
level->plane_res_l = (val >> PLANE_WM_LINES_SHIFT) &
|
|
PLANE_WM_LINES_MASK;
|
|
}
|
|
|
|
void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc,
|
|
struct skl_pipe_wm *out)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
int level, max_level;
|
|
enum plane_id plane_id;
|
|
uint32_t val;
|
|
|
|
max_level = ilk_wm_max_level(dev_priv);
|
|
|
|
for_each_plane_id_on_crtc(intel_crtc, plane_id) {
|
|
struct skl_plane_wm *wm = &out->planes[plane_id];
|
|
|
|
for (level = 0; level <= max_level; level++) {
|
|
if (plane_id != PLANE_CURSOR)
|
|
val = I915_READ(PLANE_WM(pipe, plane_id, level));
|
|
else
|
|
val = I915_READ(CUR_WM(pipe, level));
|
|
|
|
skl_wm_level_from_reg_val(val, &wm->wm[level]);
|
|
}
|
|
|
|
if (plane_id != PLANE_CURSOR)
|
|
val = I915_READ(PLANE_WM_TRANS(pipe, plane_id));
|
|
else
|
|
val = I915_READ(CUR_WM_TRANS(pipe));
|
|
|
|
skl_wm_level_from_reg_val(val, &wm->trans_wm);
|
|
}
|
|
|
|
if (!intel_crtc->active)
|
|
return;
|
|
|
|
out->linetime = I915_READ(PIPE_WM_LINETIME(pipe));
|
|
}
|
|
|
|
void skl_wm_get_hw_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct skl_ddb_values *hw = &dev_priv->wm.skl_hw;
|
|
struct skl_ddb_allocation *ddb = &dev_priv->wm.skl_hw.ddb;
|
|
struct drm_crtc *crtc;
|
|
struct intel_crtc *intel_crtc;
|
|
struct intel_crtc_state *cstate;
|
|
|
|
skl_ddb_get_hw_state(dev_priv, ddb);
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
cstate = to_intel_crtc_state(crtc->state);
|
|
|
|
skl_pipe_wm_get_hw_state(crtc, &cstate->wm.skl.optimal);
|
|
|
|
if (intel_crtc->active)
|
|
hw->dirty_pipes |= drm_crtc_mask(crtc);
|
|
}
|
|
|
|
if (dev_priv->active_crtcs) {
|
|
/* Fully recompute DDB on first atomic commit */
|
|
dev_priv->wm.distrust_bios_wm = true;
|
|
} else {
|
|
/*
|
|
* Easy/common case; just sanitize DDB now if everything off
|
|
* Keep dbuf slice info intact
|
|
*/
|
|
memset(ddb->plane, 0, sizeof(ddb->plane));
|
|
memset(ddb->uv_plane, 0, sizeof(ddb->uv_plane));
|
|
}
|
|
}
|
|
|
|
static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct ilk_wm_values *hw = &dev_priv->wm.hw;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
|
|
struct intel_pipe_wm *active = &cstate->wm.ilk.optimal;
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
static const i915_reg_t wm0_pipe_reg[] = {
|
|
[PIPE_A] = WM0_PIPEA_ILK,
|
|
[PIPE_B] = WM0_PIPEB_ILK,
|
|
[PIPE_C] = WM0_PIPEC_IVB,
|
|
};
|
|
|
|
hw->wm_pipe[pipe] = I915_READ(wm0_pipe_reg[pipe]);
|
|
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
|
|
|
|
memset(active, 0, sizeof(*active));
|
|
|
|
active->pipe_enabled = intel_crtc->active;
|
|
|
|
if (active->pipe_enabled) {
|
|
u32 tmp = hw->wm_pipe[pipe];
|
|
|
|
/*
|
|
* For active pipes LP0 watermark is marked as
|
|
* enabled, and LP1+ watermaks as disabled since
|
|
* we can't really reverse compute them in case
|
|
* multiple pipes are active.
|
|
*/
|
|
active->wm[0].enable = true;
|
|
active->wm[0].pri_val = (tmp & WM0_PIPE_PLANE_MASK) >> WM0_PIPE_PLANE_SHIFT;
|
|
active->wm[0].spr_val = (tmp & WM0_PIPE_SPRITE_MASK) >> WM0_PIPE_SPRITE_SHIFT;
|
|
active->wm[0].cur_val = tmp & WM0_PIPE_CURSOR_MASK;
|
|
active->linetime = hw->wm_linetime[pipe];
|
|
} else {
|
|
int level, max_level = ilk_wm_max_level(dev_priv);
|
|
|
|
/*
|
|
* For inactive pipes, all watermark levels
|
|
* should be marked as enabled but zeroed,
|
|
* which is what we'd compute them to.
|
|
*/
|
|
for (level = 0; level <= max_level; level++)
|
|
active->wm[level].enable = true;
|
|
}
|
|
|
|
intel_crtc->wm.active.ilk = *active;
|
|
}
|
|
|
|
#define _FW_WM(value, plane) \
|
|
(((value) & DSPFW_ ## plane ## _MASK) >> DSPFW_ ## plane ## _SHIFT)
|
|
#define _FW_WM_VLV(value, plane) \
|
|
(((value) & DSPFW_ ## plane ## _MASK_VLV) >> DSPFW_ ## plane ## _SHIFT)
|
|
|
|
static void g4x_read_wm_values(struct drm_i915_private *dev_priv,
|
|
struct g4x_wm_values *wm)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(DSPFW1);
|
|
wm->sr.plane = _FW_WM(tmp, SR);
|
|
wm->pipe[PIPE_B].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORB);
|
|
wm->pipe[PIPE_B].plane[PLANE_PRIMARY] = _FW_WM(tmp, PLANEB);
|
|
wm->pipe[PIPE_A].plane[PLANE_PRIMARY] = _FW_WM(tmp, PLANEA);
|
|
|
|
tmp = I915_READ(DSPFW2);
|
|
wm->fbc_en = tmp & DSPFW_FBC_SR_EN;
|
|
wm->sr.fbc = _FW_WM(tmp, FBC_SR);
|
|
wm->hpll.fbc = _FW_WM(tmp, FBC_HPLL_SR);
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] = _FW_WM(tmp, SPRITEB);
|
|
wm->pipe[PIPE_A].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORA);
|
|
wm->pipe[PIPE_A].plane[PLANE_SPRITE0] = _FW_WM(tmp, SPRITEA);
|
|
|
|
tmp = I915_READ(DSPFW3);
|
|
wm->hpll_en = tmp & DSPFW_HPLL_SR_EN;
|
|
wm->sr.cursor = _FW_WM(tmp, CURSOR_SR);
|
|
wm->hpll.cursor = _FW_WM(tmp, HPLL_CURSOR);
|
|
wm->hpll.plane = _FW_WM(tmp, HPLL_SR);
|
|
}
|
|
|
|
static void vlv_read_wm_values(struct drm_i915_private *dev_priv,
|
|
struct vlv_wm_values *wm)
|
|
{
|
|
enum pipe pipe;
|
|
uint32_t tmp;
|
|
|
|
for_each_pipe(dev_priv, pipe) {
|
|
tmp = I915_READ(VLV_DDL(pipe));
|
|
|
|
wm->ddl[pipe].plane[PLANE_PRIMARY] =
|
|
(tmp >> DDL_PLANE_SHIFT) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
|
|
wm->ddl[pipe].plane[PLANE_CURSOR] =
|
|
(tmp >> DDL_CURSOR_SHIFT) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
|
|
wm->ddl[pipe].plane[PLANE_SPRITE0] =
|
|
(tmp >> DDL_SPRITE_SHIFT(0)) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
|
|
wm->ddl[pipe].plane[PLANE_SPRITE1] =
|
|
(tmp >> DDL_SPRITE_SHIFT(1)) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
|
|
}
|
|
|
|
tmp = I915_READ(DSPFW1);
|
|
wm->sr.plane = _FW_WM(tmp, SR);
|
|
wm->pipe[PIPE_B].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORB);
|
|
wm->pipe[PIPE_B].plane[PLANE_PRIMARY] = _FW_WM_VLV(tmp, PLANEB);
|
|
wm->pipe[PIPE_A].plane[PLANE_PRIMARY] = _FW_WM_VLV(tmp, PLANEA);
|
|
|
|
tmp = I915_READ(DSPFW2);
|
|
wm->pipe[PIPE_A].plane[PLANE_SPRITE1] = _FW_WM_VLV(tmp, SPRITEB);
|
|
wm->pipe[PIPE_A].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORA);
|
|
wm->pipe[PIPE_A].plane[PLANE_SPRITE0] = _FW_WM_VLV(tmp, SPRITEA);
|
|
|
|
tmp = I915_READ(DSPFW3);
|
|
wm->sr.cursor = _FW_WM(tmp, CURSOR_SR);
|
|
|
|
if (IS_CHERRYVIEW(dev_priv)) {
|
|
tmp = I915_READ(DSPFW7_CHV);
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE1] = _FW_WM_VLV(tmp, SPRITED);
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] = _FW_WM_VLV(tmp, SPRITEC);
|
|
|
|
tmp = I915_READ(DSPFW8_CHV);
|
|
wm->pipe[PIPE_C].plane[PLANE_SPRITE1] = _FW_WM_VLV(tmp, SPRITEF);
|
|
wm->pipe[PIPE_C].plane[PLANE_SPRITE0] = _FW_WM_VLV(tmp, SPRITEE);
|
|
|
|
tmp = I915_READ(DSPFW9_CHV);
|
|
wm->pipe[PIPE_C].plane[PLANE_PRIMARY] = _FW_WM_VLV(tmp, PLANEC);
|
|
wm->pipe[PIPE_C].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORC);
|
|
|
|
tmp = I915_READ(DSPHOWM);
|
|
wm->sr.plane |= _FW_WM(tmp, SR_HI) << 9;
|
|
wm->pipe[PIPE_C].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITEF_HI) << 8;
|
|
wm->pipe[PIPE_C].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEE_HI) << 8;
|
|
wm->pipe[PIPE_C].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEC_HI) << 8;
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITED_HI) << 8;
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEC_HI) << 8;
|
|
wm->pipe[PIPE_B].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEB_HI) << 8;
|
|
wm->pipe[PIPE_A].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITEB_HI) << 8;
|
|
wm->pipe[PIPE_A].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEA_HI) << 8;
|
|
wm->pipe[PIPE_A].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEA_HI) << 8;
|
|
} else {
|
|
tmp = I915_READ(DSPFW7);
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE1] = _FW_WM_VLV(tmp, SPRITED);
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] = _FW_WM_VLV(tmp, SPRITEC);
|
|
|
|
tmp = I915_READ(DSPHOWM);
|
|
wm->sr.plane |= _FW_WM(tmp, SR_HI) << 9;
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITED_HI) << 8;
|
|
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEC_HI) << 8;
|
|
wm->pipe[PIPE_B].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEB_HI) << 8;
|
|
wm->pipe[PIPE_A].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITEB_HI) << 8;
|
|
wm->pipe[PIPE_A].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEA_HI) << 8;
|
|
wm->pipe[PIPE_A].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEA_HI) << 8;
|
|
}
|
|
}
|
|
|
|
#undef _FW_WM
|
|
#undef _FW_WM_VLV
|
|
|
|
void g4x_wm_get_hw_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct g4x_wm_values *wm = &dev_priv->wm.g4x;
|
|
struct intel_crtc *crtc;
|
|
|
|
g4x_read_wm_values(dev_priv, wm);
|
|
|
|
wm->cxsr = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
|
|
|
|
for_each_intel_crtc(dev, crtc) {
|
|
struct intel_crtc_state *crtc_state =
|
|
to_intel_crtc_state(crtc->base.state);
|
|
struct g4x_wm_state *active = &crtc->wm.active.g4x;
|
|
struct g4x_pipe_wm *raw;
|
|
enum pipe pipe = crtc->pipe;
|
|
enum plane_id plane_id;
|
|
int level, max_level;
|
|
|
|
active->cxsr = wm->cxsr;
|
|
active->hpll_en = wm->hpll_en;
|
|
active->fbc_en = wm->fbc_en;
|
|
|
|
active->sr = wm->sr;
|
|
active->hpll = wm->hpll;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id) {
|
|
active->wm.plane[plane_id] =
|
|
wm->pipe[pipe].plane[plane_id];
|
|
}
|
|
|
|
if (wm->cxsr && wm->hpll_en)
|
|
max_level = G4X_WM_LEVEL_HPLL;
|
|
else if (wm->cxsr)
|
|
max_level = G4X_WM_LEVEL_SR;
|
|
else
|
|
max_level = G4X_WM_LEVEL_NORMAL;
|
|
|
|
level = G4X_WM_LEVEL_NORMAL;
|
|
raw = &crtc_state->wm.g4x.raw[level];
|
|
for_each_plane_id_on_crtc(crtc, plane_id)
|
|
raw->plane[plane_id] = active->wm.plane[plane_id];
|
|
|
|
if (++level > max_level)
|
|
goto out;
|
|
|
|
raw = &crtc_state->wm.g4x.raw[level];
|
|
raw->plane[PLANE_PRIMARY] = active->sr.plane;
|
|
raw->plane[PLANE_CURSOR] = active->sr.cursor;
|
|
raw->plane[PLANE_SPRITE0] = 0;
|
|
raw->fbc = active->sr.fbc;
|
|
|
|
if (++level > max_level)
|
|
goto out;
|
|
|
|
raw = &crtc_state->wm.g4x.raw[level];
|
|
raw->plane[PLANE_PRIMARY] = active->hpll.plane;
|
|
raw->plane[PLANE_CURSOR] = active->hpll.cursor;
|
|
raw->plane[PLANE_SPRITE0] = 0;
|
|
raw->fbc = active->hpll.fbc;
|
|
|
|
out:
|
|
for_each_plane_id_on_crtc(crtc, plane_id)
|
|
g4x_raw_plane_wm_set(crtc_state, level,
|
|
plane_id, USHRT_MAX);
|
|
g4x_raw_fbc_wm_set(crtc_state, level, USHRT_MAX);
|
|
|
|
crtc_state->wm.g4x.optimal = *active;
|
|
crtc_state->wm.g4x.intermediate = *active;
|
|
|
|
DRM_DEBUG_KMS("Initial watermarks: pipe %c, plane=%d, cursor=%d, sprite=%d\n",
|
|
pipe_name(pipe),
|
|
wm->pipe[pipe].plane[PLANE_PRIMARY],
|
|
wm->pipe[pipe].plane[PLANE_CURSOR],
|
|
wm->pipe[pipe].plane[PLANE_SPRITE0]);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Initial SR watermarks: plane=%d, cursor=%d fbc=%d\n",
|
|
wm->sr.plane, wm->sr.cursor, wm->sr.fbc);
|
|
DRM_DEBUG_KMS("Initial HPLL watermarks: plane=%d, SR cursor=%d fbc=%d\n",
|
|
wm->hpll.plane, wm->hpll.cursor, wm->hpll.fbc);
|
|
DRM_DEBUG_KMS("Initial SR=%s HPLL=%s FBC=%s\n",
|
|
yesno(wm->cxsr), yesno(wm->hpll_en), yesno(wm->fbc_en));
|
|
}
|
|
|
|
void g4x_wm_sanitize(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_plane *plane;
|
|
struct intel_crtc *crtc;
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
|
|
for_each_intel_plane(&dev_priv->drm, plane) {
|
|
struct intel_crtc *crtc =
|
|
intel_get_crtc_for_pipe(dev_priv, plane->pipe);
|
|
struct intel_crtc_state *crtc_state =
|
|
to_intel_crtc_state(crtc->base.state);
|
|
struct intel_plane_state *plane_state =
|
|
to_intel_plane_state(plane->base.state);
|
|
struct g4x_wm_state *wm_state = &crtc_state->wm.g4x.optimal;
|
|
enum plane_id plane_id = plane->id;
|
|
int level;
|
|
|
|
if (plane_state->base.visible)
|
|
continue;
|
|
|
|
for (level = 0; level < 3; level++) {
|
|
struct g4x_pipe_wm *raw =
|
|
&crtc_state->wm.g4x.raw[level];
|
|
|
|
raw->plane[plane_id] = 0;
|
|
wm_state->wm.plane[plane_id] = 0;
|
|
}
|
|
|
|
if (plane_id == PLANE_PRIMARY) {
|
|
for (level = 0; level < 3; level++) {
|
|
struct g4x_pipe_wm *raw =
|
|
&crtc_state->wm.g4x.raw[level];
|
|
raw->fbc = 0;
|
|
}
|
|
|
|
wm_state->sr.fbc = 0;
|
|
wm_state->hpll.fbc = 0;
|
|
wm_state->fbc_en = false;
|
|
}
|
|
}
|
|
|
|
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
|
struct intel_crtc_state *crtc_state =
|
|
to_intel_crtc_state(crtc->base.state);
|
|
|
|
crtc_state->wm.g4x.intermediate =
|
|
crtc_state->wm.g4x.optimal;
|
|
crtc->wm.active.g4x = crtc_state->wm.g4x.optimal;
|
|
}
|
|
|
|
g4x_program_watermarks(dev_priv);
|
|
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
void vlv_wm_get_hw_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct vlv_wm_values *wm = &dev_priv->wm.vlv;
|
|
struct intel_crtc *crtc;
|
|
u32 val;
|
|
|
|
vlv_read_wm_values(dev_priv, wm);
|
|
|
|
wm->cxsr = I915_READ(FW_BLC_SELF_VLV) & FW_CSPWRDWNEN;
|
|
wm->level = VLV_WM_LEVEL_PM2;
|
|
|
|
if (IS_CHERRYVIEW(dev_priv)) {
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
|
|
if (val & DSP_MAXFIFO_PM5_ENABLE)
|
|
wm->level = VLV_WM_LEVEL_PM5;
|
|
|
|
/*
|
|
* If DDR DVFS is disabled in the BIOS, Punit
|
|
* will never ack the request. So if that happens
|
|
* assume we don't have to enable/disable DDR DVFS
|
|
* dynamically. To test that just set the REQ_ACK
|
|
* bit to poke the Punit, but don't change the
|
|
* HIGH/LOW bits so that we don't actually change
|
|
* the current state.
|
|
*/
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
|
|
val |= FORCE_DDR_FREQ_REQ_ACK;
|
|
vlv_punit_write(dev_priv, PUNIT_REG_DDR_SETUP2, val);
|
|
|
|
if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2) &
|
|
FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) {
|
|
DRM_DEBUG_KMS("Punit not acking DDR DVFS request, "
|
|
"assuming DDR DVFS is disabled\n");
|
|
dev_priv->wm.max_level = VLV_WM_LEVEL_PM5;
|
|
} else {
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
|
|
if ((val & FORCE_DDR_HIGH_FREQ) == 0)
|
|
wm->level = VLV_WM_LEVEL_DDR_DVFS;
|
|
}
|
|
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
}
|
|
|
|
for_each_intel_crtc(dev, crtc) {
|
|
struct intel_crtc_state *crtc_state =
|
|
to_intel_crtc_state(crtc->base.state);
|
|
struct vlv_wm_state *active = &crtc->wm.active.vlv;
|
|
const struct vlv_fifo_state *fifo_state =
|
|
&crtc_state->wm.vlv.fifo_state;
|
|
enum pipe pipe = crtc->pipe;
|
|
enum plane_id plane_id;
|
|
int level;
|
|
|
|
vlv_get_fifo_size(crtc_state);
|
|
|
|
active->num_levels = wm->level + 1;
|
|
active->cxsr = wm->cxsr;
|
|
|
|
for (level = 0; level < active->num_levels; level++) {
|
|
struct g4x_pipe_wm *raw =
|
|
&crtc_state->wm.vlv.raw[level];
|
|
|
|
active->sr[level].plane = wm->sr.plane;
|
|
active->sr[level].cursor = wm->sr.cursor;
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id) {
|
|
active->wm[level].plane[plane_id] =
|
|
wm->pipe[pipe].plane[plane_id];
|
|
|
|
raw->plane[plane_id] =
|
|
vlv_invert_wm_value(active->wm[level].plane[plane_id],
|
|
fifo_state->plane[plane_id]);
|
|
}
|
|
}
|
|
|
|
for_each_plane_id_on_crtc(crtc, plane_id)
|
|
vlv_raw_plane_wm_set(crtc_state, level,
|
|
plane_id, USHRT_MAX);
|
|
vlv_invalidate_wms(crtc, active, level);
|
|
|
|
crtc_state->wm.vlv.optimal = *active;
|
|
crtc_state->wm.vlv.intermediate = *active;
|
|
|
|
DRM_DEBUG_KMS("Initial watermarks: pipe %c, plane=%d, cursor=%d, sprite0=%d, sprite1=%d\n",
|
|
pipe_name(pipe),
|
|
wm->pipe[pipe].plane[PLANE_PRIMARY],
|
|
wm->pipe[pipe].plane[PLANE_CURSOR],
|
|
wm->pipe[pipe].plane[PLANE_SPRITE0],
|
|
wm->pipe[pipe].plane[PLANE_SPRITE1]);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Initial watermarks: SR plane=%d, SR cursor=%d level=%d cxsr=%d\n",
|
|
wm->sr.plane, wm->sr.cursor, wm->level, wm->cxsr);
|
|
}
|
|
|
|
void vlv_wm_sanitize(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_plane *plane;
|
|
struct intel_crtc *crtc;
|
|
|
|
mutex_lock(&dev_priv->wm.wm_mutex);
|
|
|
|
for_each_intel_plane(&dev_priv->drm, plane) {
|
|
struct intel_crtc *crtc =
|
|
intel_get_crtc_for_pipe(dev_priv, plane->pipe);
|
|
struct intel_crtc_state *crtc_state =
|
|
to_intel_crtc_state(crtc->base.state);
|
|
struct intel_plane_state *plane_state =
|
|
to_intel_plane_state(plane->base.state);
|
|
struct vlv_wm_state *wm_state = &crtc_state->wm.vlv.optimal;
|
|
const struct vlv_fifo_state *fifo_state =
|
|
&crtc_state->wm.vlv.fifo_state;
|
|
enum plane_id plane_id = plane->id;
|
|
int level;
|
|
|
|
if (plane_state->base.visible)
|
|
continue;
|
|
|
|
for (level = 0; level < wm_state->num_levels; level++) {
|
|
struct g4x_pipe_wm *raw =
|
|
&crtc_state->wm.vlv.raw[level];
|
|
|
|
raw->plane[plane_id] = 0;
|
|
|
|
wm_state->wm[level].plane[plane_id] =
|
|
vlv_invert_wm_value(raw->plane[plane_id],
|
|
fifo_state->plane[plane_id]);
|
|
}
|
|
}
|
|
|
|
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
|
struct intel_crtc_state *crtc_state =
|
|
to_intel_crtc_state(crtc->base.state);
|
|
|
|
crtc_state->wm.vlv.intermediate =
|
|
crtc_state->wm.vlv.optimal;
|
|
crtc->wm.active.vlv = crtc_state->wm.vlv.optimal;
|
|
}
|
|
|
|
vlv_program_watermarks(dev_priv);
|
|
|
|
mutex_unlock(&dev_priv->wm.wm_mutex);
|
|
}
|
|
|
|
/*
|
|
* FIXME should probably kill this and improve
|
|
* the real watermark readout/sanitation instead
|
|
*/
|
|
static void ilk_init_lp_watermarks(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(WM3_LP_ILK, I915_READ(WM3_LP_ILK) & ~WM1_LP_SR_EN);
|
|
I915_WRITE(WM2_LP_ILK, I915_READ(WM2_LP_ILK) & ~WM1_LP_SR_EN);
|
|
I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN);
|
|
|
|
/*
|
|
* Don't touch WM1S_LP_EN here.
|
|
* Doing so could cause underruns.
|
|
*/
|
|
}
|
|
|
|
void ilk_wm_get_hw_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct ilk_wm_values *hw = &dev_priv->wm.hw;
|
|
struct drm_crtc *crtc;
|
|
|
|
ilk_init_lp_watermarks(dev_priv);
|
|
|
|
for_each_crtc(dev, crtc)
|
|
ilk_pipe_wm_get_hw_state(crtc);
|
|
|
|
hw->wm_lp[0] = I915_READ(WM1_LP_ILK);
|
|
hw->wm_lp[1] = I915_READ(WM2_LP_ILK);
|
|
hw->wm_lp[2] = I915_READ(WM3_LP_ILK);
|
|
|
|
hw->wm_lp_spr[0] = I915_READ(WM1S_LP_ILK);
|
|
if (INTEL_GEN(dev_priv) >= 7) {
|
|
hw->wm_lp_spr[1] = I915_READ(WM2S_LP_IVB);
|
|
hw->wm_lp_spr[2] = I915_READ(WM3S_LP_IVB);
|
|
}
|
|
|
|
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
hw->partitioning = (I915_READ(WM_MISC) & WM_MISC_DATA_PARTITION_5_6) ?
|
|
INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2;
|
|
else if (IS_IVYBRIDGE(dev_priv))
|
|
hw->partitioning = (I915_READ(DISP_ARB_CTL2) & DISP_DATA_PARTITION_5_6) ?
|
|
INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2;
|
|
|
|
hw->enable_fbc_wm =
|
|
!(I915_READ(DISP_ARB_CTL) & DISP_FBC_WM_DIS);
|
|
}
|
|
|
|
/**
|
|
* intel_update_watermarks - update FIFO watermark values based on current modes
|
|
* @crtc: the #intel_crtc on which to compute the WM
|
|
*
|
|
* Calculate watermark values for the various WM regs based on current mode
|
|
* and plane configuration.
|
|
*
|
|
* There are several cases to deal with here:
|
|
* - normal (i.e. non-self-refresh)
|
|
* - self-refresh (SR) mode
|
|
* - lines are large relative to FIFO size (buffer can hold up to 2)
|
|
* - lines are small relative to FIFO size (buffer can hold more than 2
|
|
* lines), so need to account for TLB latency
|
|
*
|
|
* The normal calculation is:
|
|
* watermark = dotclock * bytes per pixel * latency
|
|
* where latency is platform & configuration dependent (we assume pessimal
|
|
* values here).
|
|
*
|
|
* The SR calculation is:
|
|
* watermark = (trunc(latency/line time)+1) * surface width *
|
|
* bytes per pixel
|
|
* where
|
|
* line time = htotal / dotclock
|
|
* surface width = hdisplay for normal plane and 64 for cursor
|
|
* and latency is assumed to be high, as above.
|
|
*
|
|
* The final value programmed to the register should always be rounded up,
|
|
* and include an extra 2 entries to account for clock crossings.
|
|
*
|
|
* We don't use the sprite, so we can ignore that. And on Crestline we have
|
|
* to set the non-SR watermarks to 8.
|
|
*/
|
|
void intel_update_watermarks(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
|
|
if (dev_priv->display.update_wm)
|
|
dev_priv->display.update_wm(crtc);
|
|
}
|
|
|
|
void intel_enable_ipc(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
|
|
/* Display WA #0477 WaDisableIPC: skl */
|
|
if (IS_SKYLAKE(dev_priv)) {
|
|
dev_priv->ipc_enabled = false;
|
|
return;
|
|
}
|
|
|
|
val = I915_READ(DISP_ARB_CTL2);
|
|
|
|
if (dev_priv->ipc_enabled)
|
|
val |= DISP_IPC_ENABLE;
|
|
else
|
|
val &= ~DISP_IPC_ENABLE;
|
|
|
|
I915_WRITE(DISP_ARB_CTL2, val);
|
|
}
|
|
|
|
void intel_init_ipc(struct drm_i915_private *dev_priv)
|
|
{
|
|
dev_priv->ipc_enabled = false;
|
|
if (!HAS_IPC(dev_priv))
|
|
return;
|
|
|
|
dev_priv->ipc_enabled = true;
|
|
intel_enable_ipc(dev_priv);
|
|
}
|
|
|
|
/*
|
|
* Lock protecting IPS related data structures
|
|
*/
|
|
DEFINE_SPINLOCK(mchdev_lock);
|
|
|
|
/* Global for IPS driver to get at the current i915 device. Protected by
|
|
* mchdev_lock. */
|
|
static struct drm_i915_private *i915_mch_dev;
|
|
|
|
bool ironlake_set_drps(struct drm_i915_private *dev_priv, u8 val)
|
|
{
|
|
u16 rgvswctl;
|
|
|
|
lockdep_assert_held(&mchdev_lock);
|
|
|
|
rgvswctl = I915_READ16(MEMSWCTL);
|
|
if (rgvswctl & MEMCTL_CMD_STS) {
|
|
DRM_DEBUG("gpu busy, RCS change rejected\n");
|
|
return false; /* still busy with another command */
|
|
}
|
|
|
|
rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
|
|
(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
|
|
I915_WRITE16(MEMSWCTL, rgvswctl);
|
|
POSTING_READ16(MEMSWCTL);
|
|
|
|
rgvswctl |= MEMCTL_CMD_STS;
|
|
I915_WRITE16(MEMSWCTL, rgvswctl);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ironlake_enable_drps(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 rgvmodectl;
|
|
u8 fmax, fmin, fstart, vstart;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
rgvmodectl = I915_READ(MEMMODECTL);
|
|
|
|
/* Enable temp reporting */
|
|
I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
|
|
I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
|
|
|
|
/* 100ms RC evaluation intervals */
|
|
I915_WRITE(RCUPEI, 100000);
|
|
I915_WRITE(RCDNEI, 100000);
|
|
|
|
/* Set max/min thresholds to 90ms and 80ms respectively */
|
|
I915_WRITE(RCBMAXAVG, 90000);
|
|
I915_WRITE(RCBMINAVG, 80000);
|
|
|
|
I915_WRITE(MEMIHYST, 1);
|
|
|
|
/* Set up min, max, and cur for interrupt handling */
|
|
fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
|
|
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
|
|
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
|
|
MEMMODE_FSTART_SHIFT;
|
|
|
|
vstart = (I915_READ(PXVFREQ(fstart)) & PXVFREQ_PX_MASK) >>
|
|
PXVFREQ_PX_SHIFT;
|
|
|
|
dev_priv->ips.fmax = fmax; /* IPS callback will increase this */
|
|
dev_priv->ips.fstart = fstart;
|
|
|
|
dev_priv->ips.max_delay = fstart;
|
|
dev_priv->ips.min_delay = fmin;
|
|
dev_priv->ips.cur_delay = fstart;
|
|
|
|
DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
|
|
fmax, fmin, fstart);
|
|
|
|
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
|
|
|
|
/*
|
|
* Interrupts will be enabled in ironlake_irq_postinstall
|
|
*/
|
|
|
|
I915_WRITE(VIDSTART, vstart);
|
|
POSTING_READ(VIDSTART);
|
|
|
|
rgvmodectl |= MEMMODE_SWMODE_EN;
|
|
I915_WRITE(MEMMODECTL, rgvmodectl);
|
|
|
|
if (wait_for_atomic((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
|
|
DRM_ERROR("stuck trying to change perf mode\n");
|
|
mdelay(1);
|
|
|
|
ironlake_set_drps(dev_priv, fstart);
|
|
|
|
dev_priv->ips.last_count1 = I915_READ(DMIEC) +
|
|
I915_READ(DDREC) + I915_READ(CSIEC);
|
|
dev_priv->ips.last_time1 = jiffies_to_msecs(jiffies);
|
|
dev_priv->ips.last_count2 = I915_READ(GFXEC);
|
|
dev_priv->ips.last_time2 = ktime_get_raw_ns();
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
}
|
|
|
|
static void ironlake_disable_drps(struct drm_i915_private *dev_priv)
|
|
{
|
|
u16 rgvswctl;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
rgvswctl = I915_READ16(MEMSWCTL);
|
|
|
|
/* Ack interrupts, disable EFC interrupt */
|
|
I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
|
|
I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
|
|
I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
|
|
I915_WRITE(DEIIR, DE_PCU_EVENT);
|
|
I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
|
|
|
|
/* Go back to the starting frequency */
|
|
ironlake_set_drps(dev_priv, dev_priv->ips.fstart);
|
|
mdelay(1);
|
|
rgvswctl |= MEMCTL_CMD_STS;
|
|
I915_WRITE(MEMSWCTL, rgvswctl);
|
|
mdelay(1);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
}
|
|
|
|
/* There's a funny hw issue where the hw returns all 0 when reading from
|
|
* GEN6_RP_INTERRUPT_LIMITS. Hence we always need to compute the desired value
|
|
* ourselves, instead of doing a rmw cycle (which might result in us clearing
|
|
* all limits and the gpu stuck at whatever frequency it is at atm).
|
|
*/
|
|
static u32 intel_rps_limits(struct drm_i915_private *dev_priv, u8 val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
u32 limits;
|
|
|
|
/* Only set the down limit when we've reached the lowest level to avoid
|
|
* getting more interrupts, otherwise leave this clear. This prevents a
|
|
* race in the hw when coming out of rc6: There's a tiny window where
|
|
* the hw runs at the minimal clock before selecting the desired
|
|
* frequency, if the down threshold expires in that window we will not
|
|
* receive a down interrupt. */
|
|
if (INTEL_GEN(dev_priv) >= 9) {
|
|
limits = (rps->max_freq_softlimit) << 23;
|
|
if (val <= rps->min_freq_softlimit)
|
|
limits |= (rps->min_freq_softlimit) << 14;
|
|
} else {
|
|
limits = rps->max_freq_softlimit << 24;
|
|
if (val <= rps->min_freq_softlimit)
|
|
limits |= rps->min_freq_softlimit << 16;
|
|
}
|
|
|
|
return limits;
|
|
}
|
|
|
|
static void rps_set_power(struct drm_i915_private *dev_priv, int new_power)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
u32 threshold_up = 0, threshold_down = 0; /* in % */
|
|
u32 ei_up = 0, ei_down = 0;
|
|
|
|
lockdep_assert_held(&rps->power.mutex);
|
|
|
|
if (new_power == rps->power.mode)
|
|
return;
|
|
|
|
/* Note the units here are not exactly 1us, but 1280ns. */
|
|
switch (new_power) {
|
|
case LOW_POWER:
|
|
/* Upclock if more than 95% busy over 16ms */
|
|
ei_up = 16000;
|
|
threshold_up = 95;
|
|
|
|
/* Downclock if less than 85% busy over 32ms */
|
|
ei_down = 32000;
|
|
threshold_down = 85;
|
|
break;
|
|
|
|
case BETWEEN:
|
|
/* Upclock if more than 90% busy over 13ms */
|
|
ei_up = 13000;
|
|
threshold_up = 90;
|
|
|
|
/* Downclock if less than 75% busy over 32ms */
|
|
ei_down = 32000;
|
|
threshold_down = 75;
|
|
break;
|
|
|
|
case HIGH_POWER:
|
|
/* Upclock if more than 85% busy over 10ms */
|
|
ei_up = 10000;
|
|
threshold_up = 85;
|
|
|
|
/* Downclock if less than 60% busy over 32ms */
|
|
ei_down = 32000;
|
|
threshold_down = 60;
|
|
break;
|
|
}
|
|
|
|
/* When byt can survive without system hang with dynamic
|
|
* sw freq adjustments, this restriction can be lifted.
|
|
*/
|
|
if (IS_VALLEYVIEW(dev_priv))
|
|
goto skip_hw_write;
|
|
|
|
I915_WRITE(GEN6_RP_UP_EI,
|
|
GT_INTERVAL_FROM_US(dev_priv, ei_up));
|
|
I915_WRITE(GEN6_RP_UP_THRESHOLD,
|
|
GT_INTERVAL_FROM_US(dev_priv,
|
|
ei_up * threshold_up / 100));
|
|
|
|
I915_WRITE(GEN6_RP_DOWN_EI,
|
|
GT_INTERVAL_FROM_US(dev_priv, ei_down));
|
|
I915_WRITE(GEN6_RP_DOWN_THRESHOLD,
|
|
GT_INTERVAL_FROM_US(dev_priv,
|
|
ei_down * threshold_down / 100));
|
|
|
|
I915_WRITE(GEN6_RP_CONTROL,
|
|
GEN6_RP_MEDIA_TURBO |
|
|
GEN6_RP_MEDIA_HW_NORMAL_MODE |
|
|
GEN6_RP_MEDIA_IS_GFX |
|
|
GEN6_RP_ENABLE |
|
|
GEN6_RP_UP_BUSY_AVG |
|
|
GEN6_RP_DOWN_IDLE_AVG);
|
|
|
|
skip_hw_write:
|
|
rps->power.mode = new_power;
|
|
rps->power.up_threshold = threshold_up;
|
|
rps->power.down_threshold = threshold_down;
|
|
}
|
|
|
|
static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
int new_power;
|
|
|
|
new_power = rps->power.mode;
|
|
switch (rps->power.mode) {
|
|
case LOW_POWER:
|
|
if (val > rps->efficient_freq + 1 &&
|
|
val > rps->cur_freq)
|
|
new_power = BETWEEN;
|
|
break;
|
|
|
|
case BETWEEN:
|
|
if (val <= rps->efficient_freq &&
|
|
val < rps->cur_freq)
|
|
new_power = LOW_POWER;
|
|
else if (val >= rps->rp0_freq &&
|
|
val > rps->cur_freq)
|
|
new_power = HIGH_POWER;
|
|
break;
|
|
|
|
case HIGH_POWER:
|
|
if (val < (rps->rp1_freq + rps->rp0_freq) >> 1 &&
|
|
val < rps->cur_freq)
|
|
new_power = BETWEEN;
|
|
break;
|
|
}
|
|
/* Max/min bins are special */
|
|
if (val <= rps->min_freq_softlimit)
|
|
new_power = LOW_POWER;
|
|
if (val >= rps->max_freq_softlimit)
|
|
new_power = HIGH_POWER;
|
|
|
|
mutex_lock(&rps->power.mutex);
|
|
if (rps->power.interactive)
|
|
new_power = HIGH_POWER;
|
|
rps_set_power(dev_priv, new_power);
|
|
mutex_unlock(&rps->power.mutex);
|
|
rps->last_adj = 0;
|
|
}
|
|
|
|
void intel_rps_mark_interactive(struct drm_i915_private *i915, bool interactive)
|
|
{
|
|
struct intel_rps *rps = &i915->gt_pm.rps;
|
|
|
|
if (INTEL_GEN(i915) < 6)
|
|
return;
|
|
|
|
mutex_lock(&rps->power.mutex);
|
|
if (interactive) {
|
|
if (!rps->power.interactive++ && READ_ONCE(i915->gt.awake))
|
|
rps_set_power(i915, HIGH_POWER);
|
|
} else {
|
|
GEM_BUG_ON(!rps->power.interactive);
|
|
rps->power.interactive--;
|
|
}
|
|
mutex_unlock(&rps->power.mutex);
|
|
}
|
|
|
|
static u32 gen6_rps_pm_mask(struct drm_i915_private *dev_priv, u8 val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
u32 mask = 0;
|
|
|
|
/* We use UP_EI_EXPIRED interupts for both up/down in manual mode */
|
|
if (val > rps->min_freq_softlimit)
|
|
mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT;
|
|
if (val < rps->max_freq_softlimit)
|
|
mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_UP_THRESHOLD;
|
|
|
|
mask &= dev_priv->pm_rps_events;
|
|
|
|
return gen6_sanitize_rps_pm_mask(dev_priv, ~mask);
|
|
}
|
|
|
|
/* gen6_set_rps is called to update the frequency request, but should also be
|
|
* called when the range (min_delay and max_delay) is modified so that we can
|
|
* update the GEN6_RP_INTERRUPT_LIMITS register accordingly. */
|
|
static int gen6_set_rps(struct drm_i915_private *dev_priv, u8 val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
/* min/max delay may still have been modified so be sure to
|
|
* write the limits value.
|
|
*/
|
|
if (val != rps->cur_freq) {
|
|
gen6_set_rps_thresholds(dev_priv, val);
|
|
|
|
if (INTEL_GEN(dev_priv) >= 9)
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
GEN9_FREQUENCY(val));
|
|
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
HSW_FREQUENCY(val));
|
|
else
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
GEN6_FREQUENCY(val) |
|
|
GEN6_OFFSET(0) |
|
|
GEN6_AGGRESSIVE_TURBO);
|
|
}
|
|
|
|
/* Make sure we continue to get interrupts
|
|
* until we hit the minimum or maximum frequencies.
|
|
*/
|
|
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, intel_rps_limits(dev_priv, val));
|
|
I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
|
|
|
|
rps->cur_freq = val;
|
|
trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val)
|
|
{
|
|
int err;
|
|
|
|
if (WARN_ONCE(IS_CHERRYVIEW(dev_priv) && (val & 1),
|
|
"Odd GPU freq value\n"))
|
|
val &= ~1;
|
|
|
|
I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
|
|
|
|
if (val != dev_priv->gt_pm.rps.cur_freq) {
|
|
err = vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
|
|
if (err)
|
|
return err;
|
|
|
|
gen6_set_rps_thresholds(dev_priv, val);
|
|
}
|
|
|
|
dev_priv->gt_pm.rps.cur_freq = val;
|
|
trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* vlv_set_rps_idle: Set the frequency to idle, if Gfx clocks are down
|
|
*
|
|
* * If Gfx is Idle, then
|
|
* 1. Forcewake Media well.
|
|
* 2. Request idle freq.
|
|
* 3. Release Forcewake of Media well.
|
|
*/
|
|
static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
u32 val = rps->idle_freq;
|
|
int err;
|
|
|
|
if (rps->cur_freq <= val)
|
|
return;
|
|
|
|
/* The punit delays the write of the frequency and voltage until it
|
|
* determines the GPU is awake. During normal usage we don't want to
|
|
* waste power changing the frequency if the GPU is sleeping (rc6).
|
|
* However, the GPU and driver is now idle and we do not want to delay
|
|
* switching to minimum voltage (reducing power whilst idle) as we do
|
|
* not expect to be woken in the near future and so must flush the
|
|
* change by waking the device.
|
|
*
|
|
* We choose to take the media powerwell (either would do to trick the
|
|
* punit into committing the voltage change) as that takes a lot less
|
|
* power than the render powerwell.
|
|
*/
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);
|
|
err = valleyview_set_rps(dev_priv, val);
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_MEDIA);
|
|
|
|
if (err)
|
|
DRM_ERROR("Failed to set RPS for idle\n");
|
|
}
|
|
|
|
void gen6_rps_busy(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
if (rps->enabled) {
|
|
u8 freq;
|
|
|
|
if (dev_priv->pm_rps_events & GEN6_PM_RP_UP_EI_EXPIRED)
|
|
gen6_rps_reset_ei(dev_priv);
|
|
I915_WRITE(GEN6_PMINTRMSK,
|
|
gen6_rps_pm_mask(dev_priv, rps->cur_freq));
|
|
|
|
gen6_enable_rps_interrupts(dev_priv);
|
|
|
|
/* Use the user's desired frequency as a guide, but for better
|
|
* performance, jump directly to RPe as our starting frequency.
|
|
*/
|
|
freq = max(rps->cur_freq,
|
|
rps->efficient_freq);
|
|
|
|
if (intel_set_rps(dev_priv,
|
|
clamp(freq,
|
|
rps->min_freq_softlimit,
|
|
rps->max_freq_softlimit)))
|
|
DRM_DEBUG_DRIVER("Failed to set idle frequency\n");
|
|
}
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
}
|
|
|
|
void gen6_rps_idle(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
/* Flush our bottom-half so that it does not race with us
|
|
* setting the idle frequency and so that it is bounded by
|
|
* our rpm wakeref. And then disable the interrupts to stop any
|
|
* futher RPS reclocking whilst we are asleep.
|
|
*/
|
|
gen6_disable_rps_interrupts(dev_priv);
|
|
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
if (rps->enabled) {
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
|
vlv_set_rps_idle(dev_priv);
|
|
else
|
|
gen6_set_rps(dev_priv, rps->idle_freq);
|
|
rps->last_adj = 0;
|
|
I915_WRITE(GEN6_PMINTRMSK,
|
|
gen6_sanitize_rps_pm_mask(dev_priv, ~0));
|
|
}
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
}
|
|
|
|
void gen6_rps_boost(struct i915_request *rq,
|
|
struct intel_rps_client *rps_client)
|
|
{
|
|
struct intel_rps *rps = &rq->i915->gt_pm.rps;
|
|
unsigned long flags;
|
|
bool boost;
|
|
|
|
/* This is intentionally racy! We peek at the state here, then
|
|
* validate inside the RPS worker.
|
|
*/
|
|
if (!rps->enabled)
|
|
return;
|
|
|
|
if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &rq->fence.flags))
|
|
return;
|
|
|
|
/* Serializes with i915_request_retire() */
|
|
boost = false;
|
|
spin_lock_irqsave(&rq->lock, flags);
|
|
if (!rq->waitboost && !dma_fence_is_signaled_locked(&rq->fence)) {
|
|
boost = !atomic_fetch_inc(&rps->num_waiters);
|
|
rq->waitboost = true;
|
|
}
|
|
spin_unlock_irqrestore(&rq->lock, flags);
|
|
if (!boost)
|
|
return;
|
|
|
|
if (READ_ONCE(rps->cur_freq) < rps->boost_freq)
|
|
schedule_work(&rps->work);
|
|
|
|
atomic_inc(rps_client ? &rps_client->boosts : &rps->boosts);
|
|
}
|
|
|
|
int intel_set_rps(struct drm_i915_private *dev_priv, u8 val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
int err;
|
|
|
|
lockdep_assert_held(&dev_priv->pcu_lock);
|
|
GEM_BUG_ON(val > rps->max_freq);
|
|
GEM_BUG_ON(val < rps->min_freq);
|
|
|
|
if (!rps->enabled) {
|
|
rps->cur_freq = val;
|
|
return 0;
|
|
}
|
|
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
|
err = valleyview_set_rps(dev_priv, val);
|
|
else
|
|
err = gen6_set_rps(dev_priv, val);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void gen9_disable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
I915_WRITE(GEN9_PG_ENABLE, 0);
|
|
}
|
|
|
|
static void gen9_disable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(GEN6_RP_CONTROL, 0);
|
|
}
|
|
|
|
static void gen6_disable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
}
|
|
|
|
static void gen6_disable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
|
|
I915_WRITE(GEN6_RP_CONTROL, 0);
|
|
}
|
|
|
|
static void cherryview_disable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
}
|
|
|
|
static void cherryview_disable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(GEN6_RP_CONTROL, 0);
|
|
}
|
|
|
|
static void valleyview_disable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* We're doing forcewake before Disabling RC6,
|
|
* This what the BIOS expects when going into suspend */
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void valleyview_disable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(GEN6_RP_CONTROL, 0);
|
|
}
|
|
|
|
static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
|
|
{
|
|
bool enable_rc6 = true;
|
|
unsigned long rc6_ctx_base;
|
|
u32 rc_ctl;
|
|
int rc_sw_target;
|
|
|
|
rc_ctl = I915_READ(GEN6_RC_CONTROL);
|
|
rc_sw_target = (I915_READ(GEN6_RC_STATE) & RC_SW_TARGET_STATE_MASK) >>
|
|
RC_SW_TARGET_STATE_SHIFT;
|
|
DRM_DEBUG_DRIVER("BIOS enabled RC states: "
|
|
"HW_CTRL %s HW_RC6 %s SW_TARGET_STATE %x\n",
|
|
onoff(rc_ctl & GEN6_RC_CTL_HW_ENABLE),
|
|
onoff(rc_ctl & GEN6_RC_CTL_RC6_ENABLE),
|
|
rc_sw_target);
|
|
|
|
if (!(I915_READ(RC6_LOCATION) & RC6_CTX_IN_DRAM)) {
|
|
DRM_DEBUG_DRIVER("RC6 Base location not set properly.\n");
|
|
enable_rc6 = false;
|
|
}
|
|
|
|
/*
|
|
* The exact context size is not known for BXT, so assume a page size
|
|
* for this check.
|
|
*/
|
|
rc6_ctx_base = I915_READ(RC6_CTX_BASE) & RC6_CTX_BASE_MASK;
|
|
if (!((rc6_ctx_base >= dev_priv->dsm_reserved.start) &&
|
|
(rc6_ctx_base + PAGE_SIZE < dev_priv->dsm_reserved.end))) {
|
|
DRM_DEBUG_DRIVER("RC6 Base address not as expected.\n");
|
|
enable_rc6 = false;
|
|
}
|
|
|
|
if (!(((I915_READ(PWRCTX_MAXCNT_RCSUNIT) & IDLE_TIME_MASK) > 1) &&
|
|
((I915_READ(PWRCTX_MAXCNT_VCSUNIT0) & IDLE_TIME_MASK) > 1) &&
|
|
((I915_READ(PWRCTX_MAXCNT_BCSUNIT) & IDLE_TIME_MASK) > 1) &&
|
|
((I915_READ(PWRCTX_MAXCNT_VECSUNIT) & IDLE_TIME_MASK) > 1))) {
|
|
DRM_DEBUG_DRIVER("Engine Idle wait time not set properly.\n");
|
|
enable_rc6 = false;
|
|
}
|
|
|
|
if (!I915_READ(GEN8_PUSHBUS_CONTROL) ||
|
|
!I915_READ(GEN8_PUSHBUS_ENABLE) ||
|
|
!I915_READ(GEN8_PUSHBUS_SHIFT)) {
|
|
DRM_DEBUG_DRIVER("Pushbus not setup properly.\n");
|
|
enable_rc6 = false;
|
|
}
|
|
|
|
if (!I915_READ(GEN6_GFXPAUSE)) {
|
|
DRM_DEBUG_DRIVER("GFX pause not setup properly.\n");
|
|
enable_rc6 = false;
|
|
}
|
|
|
|
if (!I915_READ(GEN8_MISC_CTRL0)) {
|
|
DRM_DEBUG_DRIVER("GPM control not setup properly.\n");
|
|
enable_rc6 = false;
|
|
}
|
|
|
|
return enable_rc6;
|
|
}
|
|
|
|
static bool sanitize_rc6(struct drm_i915_private *i915)
|
|
{
|
|
struct intel_device_info *info = mkwrite_device_info(i915);
|
|
|
|
/* Powersaving is controlled by the host when inside a VM */
|
|
if (intel_vgpu_active(i915))
|
|
info->has_rc6 = 0;
|
|
|
|
if (info->has_rc6 &&
|
|
IS_GEN9_LP(i915) && !bxt_check_bios_rc6_setup(i915)) {
|
|
DRM_INFO("RC6 disabled by BIOS\n");
|
|
info->has_rc6 = 0;
|
|
}
|
|
|
|
/*
|
|
* We assume that we do not have any deep rc6 levels if we don't have
|
|
* have the previous rc6 level supported, i.e. we use HAS_RC6()
|
|
* as the initial coarse check for rc6 in general, moving on to
|
|
* progressively finer/deeper levels.
|
|
*/
|
|
if (!info->has_rc6 && info->has_rc6p)
|
|
info->has_rc6p = 0;
|
|
|
|
return info->has_rc6;
|
|
}
|
|
|
|
static void gen6_init_rps_frequencies(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
/* All of these values are in units of 50MHz */
|
|
|
|
/* static values from HW: RP0 > RP1 > RPn (min_freq) */
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
u32 rp_state_cap = I915_READ(BXT_RP_STATE_CAP);
|
|
rps->rp0_freq = (rp_state_cap >> 16) & 0xff;
|
|
rps->rp1_freq = (rp_state_cap >> 8) & 0xff;
|
|
rps->min_freq = (rp_state_cap >> 0) & 0xff;
|
|
} else {
|
|
u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
|
|
rps->rp0_freq = (rp_state_cap >> 0) & 0xff;
|
|
rps->rp1_freq = (rp_state_cap >> 8) & 0xff;
|
|
rps->min_freq = (rp_state_cap >> 16) & 0xff;
|
|
}
|
|
/* hw_max = RP0 until we check for overclocking */
|
|
rps->max_freq = rps->rp0_freq;
|
|
|
|
rps->efficient_freq = rps->rp1_freq;
|
|
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv) ||
|
|
IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
|
|
u32 ddcc_status = 0;
|
|
|
|
if (sandybridge_pcode_read(dev_priv,
|
|
HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
|
|
&ddcc_status) == 0)
|
|
rps->efficient_freq =
|
|
clamp_t(u8,
|
|
((ddcc_status >> 8) & 0xff),
|
|
rps->min_freq,
|
|
rps->max_freq);
|
|
}
|
|
|
|
if (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
|
|
/* Store the frequency values in 16.66 MHZ units, which is
|
|
* the natural hardware unit for SKL
|
|
*/
|
|
rps->rp0_freq *= GEN9_FREQ_SCALER;
|
|
rps->rp1_freq *= GEN9_FREQ_SCALER;
|
|
rps->min_freq *= GEN9_FREQ_SCALER;
|
|
rps->max_freq *= GEN9_FREQ_SCALER;
|
|
rps->efficient_freq *= GEN9_FREQ_SCALER;
|
|
}
|
|
}
|
|
|
|
static void reset_rps(struct drm_i915_private *dev_priv,
|
|
int (*set)(struct drm_i915_private *, u8))
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
u8 freq = rps->cur_freq;
|
|
|
|
/* force a reset */
|
|
rps->power.mode = -1;
|
|
rps->cur_freq = -1;
|
|
|
|
if (set(dev_priv, freq))
|
|
DRM_ERROR("Failed to reset RPS to initial values\n");
|
|
}
|
|
|
|
/* See the Gen9_GT_PM_Programming_Guide doc for the below */
|
|
static void gen9_enable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* Program defaults and thresholds for RPS */
|
|
if (IS_GEN9(dev_priv))
|
|
I915_WRITE(GEN6_RC_VIDEO_FREQ,
|
|
GEN9_FREQUENCY(dev_priv->gt_pm.rps.rp1_freq));
|
|
|
|
/* 1 second timeout*/
|
|
I915_WRITE(GEN6_RP_DOWN_TIMEOUT,
|
|
GT_INTERVAL_FROM_US(dev_priv, 1000000));
|
|
|
|
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 0xa);
|
|
|
|
/* Leaning on the below call to gen6_set_rps to program/setup the
|
|
* Up/Down EI & threshold registers, as well as the RP_CONTROL,
|
|
* RP_INTERRUPT_LIMITS & RPNSWREQ registers */
|
|
reset_rps(dev_priv, gen6_set_rps);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void gen9_enable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_engine_cs *engine;
|
|
enum intel_engine_id id;
|
|
u32 rc6_mode;
|
|
|
|
/* 1a: Software RC state - RC0 */
|
|
I915_WRITE(GEN6_RC_STATE, 0);
|
|
|
|
/* 1b: Get forcewake during program sequence. Although the driver
|
|
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* 2a: Disable RC states. */
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
|
|
/* 2b: Program RC6 thresholds.*/
|
|
if (INTEL_GEN(dev_priv) >= 10) {
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16 | 85);
|
|
I915_WRITE(GEN10_MEDIA_WAKE_RATE_LIMIT, 150);
|
|
} else if (IS_SKYLAKE(dev_priv)) {
|
|
/*
|
|
* WaRsDoubleRc6WrlWithCoarsePowerGating:skl Doubling WRL only
|
|
* when CPG is enabled
|
|
*/
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 108 << 16);
|
|
} else {
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16);
|
|
}
|
|
|
|
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
|
|
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
|
|
for_each_engine(engine, dev_priv, id)
|
|
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
|
|
|
|
if (HAS_GUC(dev_priv))
|
|
I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA);
|
|
|
|
I915_WRITE(GEN6_RC_SLEEP, 0);
|
|
|
|
/*
|
|
* 2c: Program Coarse Power Gating Policies.
|
|
*
|
|
* Bspec's guidance is to use 25us (really 25 * 1280ns) here. What we
|
|
* use instead is a more conservative estimate for the maximum time
|
|
* it takes us to service a CS interrupt and submit a new ELSP - that
|
|
* is the time which the GPU is idle waiting for the CPU to select the
|
|
* next request to execute. If the idle hysteresis is less than that
|
|
* interrupt service latency, the hardware will automatically gate
|
|
* the power well and we will then incur the wake up cost on top of
|
|
* the service latency. A similar guide from intel_pstate is that we
|
|
* do not want the enable hysteresis to less than the wakeup latency.
|
|
*
|
|
* igt/gem_exec_nop/sequential provides a rough estimate for the
|
|
* service latency, and puts it around 10us for Broadwell (and other
|
|
* big core) and around 40us for Broxton (and other low power cores).
|
|
* [Note that for legacy ringbuffer submission, this is less than 1us!]
|
|
* However, the wakeup latency on Broxton is closer to 100us. To be
|
|
* conservative, we have to factor in a context switch on top (due
|
|
* to ksoftirqd).
|
|
*/
|
|
I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 250);
|
|
I915_WRITE(GEN9_RENDER_PG_IDLE_HYSTERESIS, 250);
|
|
|
|
/* 3a: Enable RC6 */
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */
|
|
|
|
/* WaRsUseTimeoutMode:cnl (pre-prod) */
|
|
if (IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_C0))
|
|
rc6_mode = GEN7_RC_CTL_TO_MODE;
|
|
else
|
|
rc6_mode = GEN6_RC_CTL_EI_MODE(1);
|
|
|
|
I915_WRITE(GEN6_RC_CONTROL,
|
|
GEN6_RC_CTL_HW_ENABLE |
|
|
GEN6_RC_CTL_RC6_ENABLE |
|
|
rc6_mode);
|
|
|
|
/*
|
|
* 3b: Enable Coarse Power Gating only when RC6 is enabled.
|
|
* WaRsDisableCoarsePowerGating:skl,cnl - Render/Media PG need to be disabled with RC6.
|
|
*/
|
|
if (NEEDS_WaRsDisableCoarsePowerGating(dev_priv))
|
|
I915_WRITE(GEN9_PG_ENABLE, 0);
|
|
else
|
|
I915_WRITE(GEN9_PG_ENABLE,
|
|
GEN9_RENDER_PG_ENABLE | GEN9_MEDIA_PG_ENABLE);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void gen8_enable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_engine_cs *engine;
|
|
enum intel_engine_id id;
|
|
|
|
/* 1a: Software RC state - RC0 */
|
|
I915_WRITE(GEN6_RC_STATE, 0);
|
|
|
|
/* 1b: Get forcewake during program sequence. Although the driver
|
|
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* 2a: Disable RC states. */
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
|
|
/* 2b: Program RC6 thresholds.*/
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
|
|
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
|
|
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
|
|
for_each_engine(engine, dev_priv, id)
|
|
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
|
|
I915_WRITE(GEN6_RC_SLEEP, 0);
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us/1.28 for TO */
|
|
|
|
/* 3: Enable RC6 */
|
|
|
|
I915_WRITE(GEN6_RC_CONTROL,
|
|
GEN6_RC_CTL_HW_ENABLE |
|
|
GEN7_RC_CTL_TO_MODE |
|
|
GEN6_RC_CTL_RC6_ENABLE);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void gen8_enable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* 1 Program defaults and thresholds for RPS*/
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
HSW_FREQUENCY(rps->rp1_freq));
|
|
I915_WRITE(GEN6_RC_VIDEO_FREQ,
|
|
HSW_FREQUENCY(rps->rp1_freq));
|
|
/* NB: Docs say 1s, and 1000000 - which aren't equivalent */
|
|
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 100000000 / 128); /* 1 second timeout */
|
|
|
|
/* Docs recommend 900MHz, and 300 MHz respectively */
|
|
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
|
|
rps->max_freq_softlimit << 24 |
|
|
rps->min_freq_softlimit << 16);
|
|
|
|
I915_WRITE(GEN6_RP_UP_THRESHOLD, 7600000 / 128); /* 76ms busyness per EI, 90% */
|
|
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 31300000 / 128); /* 313ms busyness per EI, 70%*/
|
|
I915_WRITE(GEN6_RP_UP_EI, 66000); /* 84.48ms, XXX: random? */
|
|
I915_WRITE(GEN6_RP_DOWN_EI, 350000); /* 448ms, XXX: random? */
|
|
|
|
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
|
|
|
|
/* 2: Enable RPS */
|
|
I915_WRITE(GEN6_RP_CONTROL,
|
|
GEN6_RP_MEDIA_TURBO |
|
|
GEN6_RP_MEDIA_HW_NORMAL_MODE |
|
|
GEN6_RP_MEDIA_IS_GFX |
|
|
GEN6_RP_ENABLE |
|
|
GEN6_RP_UP_BUSY_AVG |
|
|
GEN6_RP_DOWN_IDLE_AVG);
|
|
|
|
reset_rps(dev_priv, gen6_set_rps);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void gen6_enable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_engine_cs *engine;
|
|
enum intel_engine_id id;
|
|
u32 rc6vids, rc6_mask;
|
|
u32 gtfifodbg;
|
|
int ret;
|
|
|
|
I915_WRITE(GEN6_RC_STATE, 0);
|
|
|
|
/* Clear the DBG now so we don't confuse earlier errors */
|
|
gtfifodbg = I915_READ(GTFIFODBG);
|
|
if (gtfifodbg) {
|
|
DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
|
|
I915_WRITE(GTFIFODBG, gtfifodbg);
|
|
}
|
|
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* disable the counters and set deterministic thresholds */
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
|
|
I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
|
|
I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
|
|
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
|
|
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
|
|
|
|
for_each_engine(engine, dev_priv, id)
|
|
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
|
|
|
|
I915_WRITE(GEN6_RC_SLEEP, 0);
|
|
I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
|
|
if (IS_IVYBRIDGE(dev_priv))
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 125000);
|
|
else
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
|
|
I915_WRITE(GEN6_RC6p_THRESHOLD, 150000);
|
|
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
|
|
|
|
/* We don't use those on Haswell */
|
|
rc6_mask = GEN6_RC_CTL_RC6_ENABLE;
|
|
if (HAS_RC6p(dev_priv))
|
|
rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
|
|
if (HAS_RC6pp(dev_priv))
|
|
rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
|
|
I915_WRITE(GEN6_RC_CONTROL,
|
|
rc6_mask |
|
|
GEN6_RC_CTL_EI_MODE(1) |
|
|
GEN6_RC_CTL_HW_ENABLE);
|
|
|
|
rc6vids = 0;
|
|
ret = sandybridge_pcode_read(dev_priv, GEN6_PCODE_READ_RC6VIDS, &rc6vids);
|
|
if (IS_GEN6(dev_priv) && ret) {
|
|
DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n");
|
|
} else if (IS_GEN6(dev_priv) && (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) {
|
|
DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n",
|
|
GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450);
|
|
rc6vids &= 0xffff00;
|
|
rc6vids |= GEN6_ENCODE_RC6_VID(450);
|
|
ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
|
|
if (ret)
|
|
DRM_ERROR("Couldn't fix incorrect rc6 voltage\n");
|
|
}
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void gen6_enable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* Here begins a magic sequence of register writes to enable
|
|
* auto-downclocking.
|
|
*
|
|
* Perhaps there might be some value in exposing these to
|
|
* userspace...
|
|
*/
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* Power down if completely idle for over 50ms */
|
|
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 50000);
|
|
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
|
|
|
|
reset_rps(dev_priv, gen6_set_rps);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
const int min_freq = 15;
|
|
const int scaling_factor = 180;
|
|
unsigned int gpu_freq;
|
|
unsigned int max_ia_freq, min_ring_freq;
|
|
unsigned int max_gpu_freq, min_gpu_freq;
|
|
struct cpufreq_policy *policy;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->pcu_lock));
|
|
|
|
if (rps->max_freq <= rps->min_freq)
|
|
return;
|
|
|
|
policy = cpufreq_cpu_get(0);
|
|
if (policy) {
|
|
max_ia_freq = policy->cpuinfo.max_freq;
|
|
cpufreq_cpu_put(policy);
|
|
} else {
|
|
/*
|
|
* Default to measured freq if none found, PCU will ensure we
|
|
* don't go over
|
|
*/
|
|
max_ia_freq = tsc_khz;
|
|
}
|
|
|
|
/* Convert from kHz to MHz */
|
|
max_ia_freq /= 1000;
|
|
|
|
min_ring_freq = I915_READ(DCLK) & 0xf;
|
|
/* convert DDR frequency from units of 266.6MHz to bandwidth */
|
|
min_ring_freq = mult_frac(min_ring_freq, 8, 3);
|
|
|
|
min_gpu_freq = rps->min_freq;
|
|
max_gpu_freq = rps->max_freq;
|
|
if (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
|
|
/* Convert GT frequency to 50 HZ units */
|
|
min_gpu_freq /= GEN9_FREQ_SCALER;
|
|
max_gpu_freq /= GEN9_FREQ_SCALER;
|
|
}
|
|
|
|
/*
|
|
* For each potential GPU frequency, load a ring frequency we'd like
|
|
* to use for memory access. We do this by specifying the IA frequency
|
|
* the PCU should use as a reference to determine the ring frequency.
|
|
*/
|
|
for (gpu_freq = max_gpu_freq; gpu_freq >= min_gpu_freq; gpu_freq--) {
|
|
const int diff = max_gpu_freq - gpu_freq;
|
|
unsigned int ia_freq = 0, ring_freq = 0;
|
|
|
|
if (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
|
|
/*
|
|
* ring_freq = 2 * GT. ring_freq is in 100MHz units
|
|
* No floor required for ring frequency on SKL.
|
|
*/
|
|
ring_freq = gpu_freq;
|
|
} else if (INTEL_GEN(dev_priv) >= 8) {
|
|
/* max(2 * GT, DDR). NB: GT is 50MHz units */
|
|
ring_freq = max(min_ring_freq, gpu_freq);
|
|
} else if (IS_HASWELL(dev_priv)) {
|
|
ring_freq = mult_frac(gpu_freq, 5, 4);
|
|
ring_freq = max(min_ring_freq, ring_freq);
|
|
/* leave ia_freq as the default, chosen by cpufreq */
|
|
} else {
|
|
/* On older processors, there is no separate ring
|
|
* clock domain, so in order to boost the bandwidth
|
|
* of the ring, we need to upclock the CPU (ia_freq).
|
|
*
|
|
* For GPU frequencies less than 750MHz,
|
|
* just use the lowest ring freq.
|
|
*/
|
|
if (gpu_freq < min_freq)
|
|
ia_freq = 800;
|
|
else
|
|
ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
|
|
ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
|
|
}
|
|
|
|
sandybridge_pcode_write(dev_priv,
|
|
GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
|
|
ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
|
|
ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
|
|
gpu_freq);
|
|
}
|
|
}
|
|
|
|
static int cherryview_rps_max_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rp0;
|
|
|
|
val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE);
|
|
|
|
switch (INTEL_INFO(dev_priv)->sseu.eu_total) {
|
|
case 8:
|
|
/* (2 * 4) config */
|
|
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS4EU_FUSE_SHIFT);
|
|
break;
|
|
case 12:
|
|
/* (2 * 6) config */
|
|
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS6EU_FUSE_SHIFT);
|
|
break;
|
|
case 16:
|
|
/* (2 * 8) config */
|
|
default:
|
|
/* Setting (2 * 8) Min RP0 for any other combination */
|
|
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS8EU_FUSE_SHIFT);
|
|
break;
|
|
}
|
|
|
|
rp0 = (rp0 & FB_GFX_FREQ_FUSE_MASK);
|
|
|
|
return rp0;
|
|
}
|
|
|
|
static int cherryview_rps_rpe_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rpe;
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_GPU_DUTYCYCLE_REG);
|
|
rpe = (val >> PUNIT_GPU_DUTYCYCLE_RPE_FREQ_SHIFT) & PUNIT_GPU_DUTYCYCLE_RPE_FREQ_MASK;
|
|
|
|
return rpe;
|
|
}
|
|
|
|
static int cherryview_rps_guar_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rp1;
|
|
|
|
val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE);
|
|
rp1 = (val & FB_GFX_FREQ_FUSE_MASK);
|
|
|
|
return rp1;
|
|
}
|
|
|
|
static u32 cherryview_rps_min_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rpn;
|
|
|
|
val = vlv_punit_read(dev_priv, FB_GFX_FMIN_AT_VMIN_FUSE);
|
|
rpn = ((val >> FB_GFX_FMIN_AT_VMIN_FUSE_SHIFT) &
|
|
FB_GFX_FREQ_FUSE_MASK);
|
|
|
|
return rpn;
|
|
}
|
|
|
|
static int valleyview_rps_guar_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rp1;
|
|
|
|
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE);
|
|
|
|
rp1 = (val & FB_GFX_FGUARANTEED_FREQ_FUSE_MASK) >> FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT;
|
|
|
|
return rp1;
|
|
}
|
|
|
|
static int valleyview_rps_max_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rp0;
|
|
|
|
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE);
|
|
|
|
rp0 = (val & FB_GFX_MAX_FREQ_FUSE_MASK) >> FB_GFX_MAX_FREQ_FUSE_SHIFT;
|
|
/* Clamp to max */
|
|
rp0 = min_t(u32, rp0, 0xea);
|
|
|
|
return rp0;
|
|
}
|
|
|
|
static int valleyview_rps_rpe_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rpe;
|
|
|
|
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_LO);
|
|
rpe = (val & FB_FMAX_VMIN_FREQ_LO_MASK) >> FB_FMAX_VMIN_FREQ_LO_SHIFT;
|
|
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_HI);
|
|
rpe |= (val & FB_FMAX_VMIN_FREQ_HI_MASK) << 5;
|
|
|
|
return rpe;
|
|
}
|
|
|
|
static int valleyview_rps_min_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_LFM) & 0xff;
|
|
/*
|
|
* According to the BYT Punit GPU turbo HAS 1.1.6.3 the minimum value
|
|
* for the minimum frequency in GPLL mode is 0xc1. Contrary to this on
|
|
* a BYT-M B0 the above register contains 0xbf. Moreover when setting
|
|
* a frequency Punit will not allow values below 0xc0. Clamp it 0xc0
|
|
* to make sure it matches what Punit accepts.
|
|
*/
|
|
return max_t(u32, val, 0xc0);
|
|
}
|
|
|
|
/* Check that the pctx buffer wasn't move under us. */
|
|
static void valleyview_check_pctx(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
|
|
|
|
WARN_ON(pctx_addr != dev_priv->dsm.start +
|
|
dev_priv->vlv_pctx->stolen->start);
|
|
}
|
|
|
|
|
|
/* Check that the pcbr address is not empty. */
|
|
static void cherryview_check_pctx(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
|
|
|
|
WARN_ON((pctx_addr >> VLV_PCBR_ADDR_SHIFT) == 0);
|
|
}
|
|
|
|
static void cherryview_setup_pctx(struct drm_i915_private *dev_priv)
|
|
{
|
|
resource_size_t pctx_paddr, paddr;
|
|
resource_size_t pctx_size = 32*1024;
|
|
u32 pcbr;
|
|
|
|
pcbr = I915_READ(VLV_PCBR);
|
|
if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
|
|
DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
|
|
paddr = dev_priv->dsm.end + 1 - pctx_size;
|
|
GEM_BUG_ON(paddr > U32_MAX);
|
|
|
|
pctx_paddr = (paddr & (~4095));
|
|
I915_WRITE(VLV_PCBR, pctx_paddr);
|
|
}
|
|
|
|
DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
|
|
}
|
|
|
|
static void valleyview_setup_pctx(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_i915_gem_object *pctx;
|
|
resource_size_t pctx_paddr;
|
|
resource_size_t pctx_size = 24*1024;
|
|
u32 pcbr;
|
|
|
|
pcbr = I915_READ(VLV_PCBR);
|
|
if (pcbr) {
|
|
/* BIOS set it up already, grab the pre-alloc'd space */
|
|
resource_size_t pcbr_offset;
|
|
|
|
pcbr_offset = (pcbr & (~4095)) - dev_priv->dsm.start;
|
|
pctx = i915_gem_object_create_stolen_for_preallocated(dev_priv,
|
|
pcbr_offset,
|
|
I915_GTT_OFFSET_NONE,
|
|
pctx_size);
|
|
goto out;
|
|
}
|
|
|
|
DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
|
|
|
|
/*
|
|
* From the Gunit register HAS:
|
|
* The Gfx driver is expected to program this register and ensure
|
|
* proper allocation within Gfx stolen memory. For example, this
|
|
* register should be programmed such than the PCBR range does not
|
|
* overlap with other ranges, such as the frame buffer, protected
|
|
* memory, or any other relevant ranges.
|
|
*/
|
|
pctx = i915_gem_object_create_stolen(dev_priv, pctx_size);
|
|
if (!pctx) {
|
|
DRM_DEBUG("not enough stolen space for PCTX, disabling\n");
|
|
goto out;
|
|
}
|
|
|
|
GEM_BUG_ON(range_overflows_t(u64,
|
|
dev_priv->dsm.start,
|
|
pctx->stolen->start,
|
|
U32_MAX));
|
|
pctx_paddr = dev_priv->dsm.start + pctx->stolen->start;
|
|
I915_WRITE(VLV_PCBR, pctx_paddr);
|
|
|
|
out:
|
|
DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
|
|
dev_priv->vlv_pctx = pctx;
|
|
}
|
|
|
|
static void valleyview_cleanup_pctx(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_i915_gem_object *pctx;
|
|
|
|
pctx = fetch_and_zero(&dev_priv->vlv_pctx);
|
|
if (pctx)
|
|
i915_gem_object_put(pctx);
|
|
}
|
|
|
|
static void vlv_init_gpll_ref_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
dev_priv->gt_pm.rps.gpll_ref_freq =
|
|
vlv_get_cck_clock(dev_priv, "GPLL ref",
|
|
CCK_GPLL_CLOCK_CONTROL,
|
|
dev_priv->czclk_freq);
|
|
|
|
DRM_DEBUG_DRIVER("GPLL reference freq: %d kHz\n",
|
|
dev_priv->gt_pm.rps.gpll_ref_freq);
|
|
}
|
|
|
|
static void valleyview_init_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
u32 val;
|
|
|
|
valleyview_setup_pctx(dev_priv);
|
|
|
|
vlv_init_gpll_ref_freq(dev_priv);
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
|
|
switch ((val >> 6) & 3) {
|
|
case 0:
|
|
case 1:
|
|
dev_priv->mem_freq = 800;
|
|
break;
|
|
case 2:
|
|
dev_priv->mem_freq = 1066;
|
|
break;
|
|
case 3:
|
|
dev_priv->mem_freq = 1333;
|
|
break;
|
|
}
|
|
DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", dev_priv->mem_freq);
|
|
|
|
rps->max_freq = valleyview_rps_max_freq(dev_priv);
|
|
rps->rp0_freq = rps->max_freq;
|
|
DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
|
|
intel_gpu_freq(dev_priv, rps->max_freq),
|
|
rps->max_freq);
|
|
|
|
rps->efficient_freq = valleyview_rps_rpe_freq(dev_priv);
|
|
DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
|
|
intel_gpu_freq(dev_priv, rps->efficient_freq),
|
|
rps->efficient_freq);
|
|
|
|
rps->rp1_freq = valleyview_rps_guar_freq(dev_priv);
|
|
DRM_DEBUG_DRIVER("RP1(Guar Freq) GPU freq: %d MHz (%u)\n",
|
|
intel_gpu_freq(dev_priv, rps->rp1_freq),
|
|
rps->rp1_freq);
|
|
|
|
rps->min_freq = valleyview_rps_min_freq(dev_priv);
|
|
DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
|
|
intel_gpu_freq(dev_priv, rps->min_freq),
|
|
rps->min_freq);
|
|
}
|
|
|
|
static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
u32 val;
|
|
|
|
cherryview_setup_pctx(dev_priv);
|
|
|
|
vlv_init_gpll_ref_freq(dev_priv);
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
val = vlv_cck_read(dev_priv, CCK_FUSE_REG);
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
switch ((val >> 2) & 0x7) {
|
|
case 3:
|
|
dev_priv->mem_freq = 2000;
|
|
break;
|
|
default:
|
|
dev_priv->mem_freq = 1600;
|
|
break;
|
|
}
|
|
DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", dev_priv->mem_freq);
|
|
|
|
rps->max_freq = cherryview_rps_max_freq(dev_priv);
|
|
rps->rp0_freq = rps->max_freq;
|
|
DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
|
|
intel_gpu_freq(dev_priv, rps->max_freq),
|
|
rps->max_freq);
|
|
|
|
rps->efficient_freq = cherryview_rps_rpe_freq(dev_priv);
|
|
DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
|
|
intel_gpu_freq(dev_priv, rps->efficient_freq),
|
|
rps->efficient_freq);
|
|
|
|
rps->rp1_freq = cherryview_rps_guar_freq(dev_priv);
|
|
DRM_DEBUG_DRIVER("RP1(Guar) GPU freq: %d MHz (%u)\n",
|
|
intel_gpu_freq(dev_priv, rps->rp1_freq),
|
|
rps->rp1_freq);
|
|
|
|
rps->min_freq = cherryview_rps_min_freq(dev_priv);
|
|
DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
|
|
intel_gpu_freq(dev_priv, rps->min_freq),
|
|
rps->min_freq);
|
|
|
|
WARN_ONCE((rps->max_freq | rps->efficient_freq | rps->rp1_freq |
|
|
rps->min_freq) & 1,
|
|
"Odd GPU freq values\n");
|
|
}
|
|
|
|
static void valleyview_cleanup_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
valleyview_cleanup_pctx(dev_priv);
|
|
}
|
|
|
|
static void cherryview_enable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_engine_cs *engine;
|
|
enum intel_engine_id id;
|
|
u32 gtfifodbg, rc6_mode, pcbr;
|
|
|
|
gtfifodbg = I915_READ(GTFIFODBG) & ~(GT_FIFO_SBDEDICATE_FREE_ENTRY_CHV |
|
|
GT_FIFO_FREE_ENTRIES_CHV);
|
|
if (gtfifodbg) {
|
|
DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
|
|
gtfifodbg);
|
|
I915_WRITE(GTFIFODBG, gtfifodbg);
|
|
}
|
|
|
|
cherryview_check_pctx(dev_priv);
|
|
|
|
/* 1a & 1b: Get forcewake during program sequence. Although the driver
|
|
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* Disable RC states. */
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
|
|
/* 2a: Program RC6 thresholds.*/
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
|
|
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
|
|
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
|
|
|
|
for_each_engine(engine, dev_priv, id)
|
|
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
|
|
I915_WRITE(GEN6_RC_SLEEP, 0);
|
|
|
|
/* TO threshold set to 500 us ( 0x186 * 1.28 us) */
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 0x186);
|
|
|
|
/* Allows RC6 residency counter to work */
|
|
I915_WRITE(VLV_COUNTER_CONTROL,
|
|
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
|
|
VLV_MEDIA_RC6_COUNT_EN |
|
|
VLV_RENDER_RC6_COUNT_EN));
|
|
|
|
/* For now we assume BIOS is allocating and populating the PCBR */
|
|
pcbr = I915_READ(VLV_PCBR);
|
|
|
|
/* 3: Enable RC6 */
|
|
rc6_mode = 0;
|
|
if (pcbr >> VLV_PCBR_ADDR_SHIFT)
|
|
rc6_mode = GEN7_RC_CTL_TO_MODE;
|
|
I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void cherryview_enable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* 1: Program defaults and thresholds for RPS*/
|
|
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
|
|
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
|
|
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
|
|
I915_WRITE(GEN6_RP_UP_EI, 66000);
|
|
I915_WRITE(GEN6_RP_DOWN_EI, 350000);
|
|
|
|
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
|
|
|
|
/* 2: Enable RPS */
|
|
I915_WRITE(GEN6_RP_CONTROL,
|
|
GEN6_RP_MEDIA_HW_NORMAL_MODE |
|
|
GEN6_RP_MEDIA_IS_GFX |
|
|
GEN6_RP_ENABLE |
|
|
GEN6_RP_UP_BUSY_AVG |
|
|
GEN6_RP_DOWN_IDLE_AVG);
|
|
|
|
/* Setting Fixed Bias */
|
|
val = VLV_OVERRIDE_EN |
|
|
VLV_SOC_TDP_EN |
|
|
CHV_BIAS_CPU_50_SOC_50;
|
|
vlv_punit_write(dev_priv, VLV_TURBO_SOC_OVERRIDE, val);
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
|
|
|
|
/* RPS code assumes GPLL is used */
|
|
WARN_ONCE((val & GPLLENABLE) == 0, "GPLL not enabled\n");
|
|
|
|
DRM_DEBUG_DRIVER("GPLL enabled? %s\n", yesno(val & GPLLENABLE));
|
|
DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
|
|
|
|
reset_rps(dev_priv, valleyview_set_rps);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void valleyview_enable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_engine_cs *engine;
|
|
enum intel_engine_id id;
|
|
u32 gtfifodbg;
|
|
|
|
valleyview_check_pctx(dev_priv);
|
|
|
|
gtfifodbg = I915_READ(GTFIFODBG);
|
|
if (gtfifodbg) {
|
|
DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
|
|
gtfifodbg);
|
|
I915_WRITE(GTFIFODBG, gtfifodbg);
|
|
}
|
|
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
/* Disable RC states. */
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000);
|
|
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
|
|
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
|
|
|
|
for_each_engine(engine, dev_priv, id)
|
|
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
|
|
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 0x557);
|
|
|
|
/* Allows RC6 residency counter to work */
|
|
I915_WRITE(VLV_COUNTER_CONTROL,
|
|
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
|
|
VLV_MEDIA_RC0_COUNT_EN |
|
|
VLV_RENDER_RC0_COUNT_EN |
|
|
VLV_MEDIA_RC6_COUNT_EN |
|
|
VLV_RENDER_RC6_COUNT_EN));
|
|
|
|
I915_WRITE(GEN6_RC_CONTROL,
|
|
GEN7_RC_CTL_TO_MODE | VLV_RC_CTL_CTX_RST_PARALLEL);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static void valleyview_enable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
|
|
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
|
|
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
|
|
I915_WRITE(GEN6_RP_UP_EI, 66000);
|
|
I915_WRITE(GEN6_RP_DOWN_EI, 350000);
|
|
|
|
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
|
|
|
|
I915_WRITE(GEN6_RP_CONTROL,
|
|
GEN6_RP_MEDIA_TURBO |
|
|
GEN6_RP_MEDIA_HW_NORMAL_MODE |
|
|
GEN6_RP_MEDIA_IS_GFX |
|
|
GEN6_RP_ENABLE |
|
|
GEN6_RP_UP_BUSY_AVG |
|
|
GEN6_RP_DOWN_IDLE_CONT);
|
|
|
|
/* Setting Fixed Bias */
|
|
val = VLV_OVERRIDE_EN |
|
|
VLV_SOC_TDP_EN |
|
|
VLV_BIAS_CPU_125_SOC_875;
|
|
vlv_punit_write(dev_priv, VLV_TURBO_SOC_OVERRIDE, val);
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
|
|
|
|
/* RPS code assumes GPLL is used */
|
|
WARN_ONCE((val & GPLLENABLE) == 0, "GPLL not enabled\n");
|
|
|
|
DRM_DEBUG_DRIVER("GPLL enabled? %s\n", yesno(val & GPLLENABLE));
|
|
DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
|
|
|
|
reset_rps(dev_priv, valleyview_set_rps);
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
}
|
|
|
|
static unsigned long intel_pxfreq(u32 vidfreq)
|
|
{
|
|
unsigned long freq;
|
|
int div = (vidfreq & 0x3f0000) >> 16;
|
|
int post = (vidfreq & 0x3000) >> 12;
|
|
int pre = (vidfreq & 0x7);
|
|
|
|
if (!pre)
|
|
return 0;
|
|
|
|
freq = ((div * 133333) / ((1<<post) * pre));
|
|
|
|
return freq;
|
|
}
|
|
|
|
static const struct cparams {
|
|
u16 i;
|
|
u16 t;
|
|
u16 m;
|
|
u16 c;
|
|
} cparams[] = {
|
|
{ 1, 1333, 301, 28664 },
|
|
{ 1, 1066, 294, 24460 },
|
|
{ 1, 800, 294, 25192 },
|
|
{ 0, 1333, 276, 27605 },
|
|
{ 0, 1066, 276, 27605 },
|
|
{ 0, 800, 231, 23784 },
|
|
};
|
|
|
|
static unsigned long __i915_chipset_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
u64 total_count, diff, ret;
|
|
u32 count1, count2, count3, m = 0, c = 0;
|
|
unsigned long now = jiffies_to_msecs(jiffies), diff1;
|
|
int i;
|
|
|
|
lockdep_assert_held(&mchdev_lock);
|
|
|
|
diff1 = now - dev_priv->ips.last_time1;
|
|
|
|
/* Prevent division-by-zero if we are asking too fast.
|
|
* Also, we don't get interesting results if we are polling
|
|
* faster than once in 10ms, so just return the saved value
|
|
* in such cases.
|
|
*/
|
|
if (diff1 <= 10)
|
|
return dev_priv->ips.chipset_power;
|
|
|
|
count1 = I915_READ(DMIEC);
|
|
count2 = I915_READ(DDREC);
|
|
count3 = I915_READ(CSIEC);
|
|
|
|
total_count = count1 + count2 + count3;
|
|
|
|
/* FIXME: handle per-counter overflow */
|
|
if (total_count < dev_priv->ips.last_count1) {
|
|
diff = ~0UL - dev_priv->ips.last_count1;
|
|
diff += total_count;
|
|
} else {
|
|
diff = total_count - dev_priv->ips.last_count1;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cparams); i++) {
|
|
if (cparams[i].i == dev_priv->ips.c_m &&
|
|
cparams[i].t == dev_priv->ips.r_t) {
|
|
m = cparams[i].m;
|
|
c = cparams[i].c;
|
|
break;
|
|
}
|
|
}
|
|
|
|
diff = div_u64(diff, diff1);
|
|
ret = ((m * diff) + c);
|
|
ret = div_u64(ret, 10);
|
|
|
|
dev_priv->ips.last_count1 = total_count;
|
|
dev_priv->ips.last_time1 = now;
|
|
|
|
dev_priv->ips.chipset_power = ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long val;
|
|
|
|
if (!IS_GEN5(dev_priv))
|
|
return 0;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
val = __i915_chipset_val(dev_priv);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return val;
|
|
}
|
|
|
|
unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long m, x, b;
|
|
u32 tsfs;
|
|
|
|
tsfs = I915_READ(TSFS);
|
|
|
|
m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT);
|
|
x = I915_READ8(TR1);
|
|
|
|
b = tsfs & TSFS_INTR_MASK;
|
|
|
|
return ((m * x) / 127) - b;
|
|
}
|
|
|
|
static int _pxvid_to_vd(u8 pxvid)
|
|
{
|
|
if (pxvid == 0)
|
|
return 0;
|
|
|
|
if (pxvid >= 8 && pxvid < 31)
|
|
pxvid = 31;
|
|
|
|
return (pxvid + 2) * 125;
|
|
}
|
|
|
|
static u32 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
|
|
{
|
|
const int vd = _pxvid_to_vd(pxvid);
|
|
const int vm = vd - 1125;
|
|
|
|
if (INTEL_INFO(dev_priv)->is_mobile)
|
|
return vm > 0 ? vm : 0;
|
|
|
|
return vd;
|
|
}
|
|
|
|
static void __i915_update_gfx_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
u64 now, diff, diffms;
|
|
u32 count;
|
|
|
|
lockdep_assert_held(&mchdev_lock);
|
|
|
|
now = ktime_get_raw_ns();
|
|
diffms = now - dev_priv->ips.last_time2;
|
|
do_div(diffms, NSEC_PER_MSEC);
|
|
|
|
/* Don't divide by 0 */
|
|
if (!diffms)
|
|
return;
|
|
|
|
count = I915_READ(GFXEC);
|
|
|
|
if (count < dev_priv->ips.last_count2) {
|
|
diff = ~0UL - dev_priv->ips.last_count2;
|
|
diff += count;
|
|
} else {
|
|
diff = count - dev_priv->ips.last_count2;
|
|
}
|
|
|
|
dev_priv->ips.last_count2 = count;
|
|
dev_priv->ips.last_time2 = now;
|
|
|
|
/* More magic constants... */
|
|
diff = diff * 1181;
|
|
diff = div_u64(diff, diffms * 10);
|
|
dev_priv->ips.gfx_power = diff;
|
|
}
|
|
|
|
void i915_update_gfx_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (!IS_GEN5(dev_priv))
|
|
return;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
__i915_update_gfx_val(dev_priv);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
}
|
|
|
|
static unsigned long __i915_gfx_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long t, corr, state1, corr2, state2;
|
|
u32 pxvid, ext_v;
|
|
|
|
lockdep_assert_held(&mchdev_lock);
|
|
|
|
pxvid = I915_READ(PXVFREQ(dev_priv->gt_pm.rps.cur_freq));
|
|
pxvid = (pxvid >> 24) & 0x7f;
|
|
ext_v = pvid_to_extvid(dev_priv, pxvid);
|
|
|
|
state1 = ext_v;
|
|
|
|
t = i915_mch_val(dev_priv);
|
|
|
|
/* Revel in the empirically derived constants */
|
|
|
|
/* Correction factor in 1/100000 units */
|
|
if (t > 80)
|
|
corr = ((t * 2349) + 135940);
|
|
else if (t >= 50)
|
|
corr = ((t * 964) + 29317);
|
|
else /* < 50 */
|
|
corr = ((t * 301) + 1004);
|
|
|
|
corr = corr * ((150142 * state1) / 10000 - 78642);
|
|
corr /= 100000;
|
|
corr2 = (corr * dev_priv->ips.corr);
|
|
|
|
state2 = (corr2 * state1) / 10000;
|
|
state2 /= 100; /* convert to mW */
|
|
|
|
__i915_update_gfx_val(dev_priv);
|
|
|
|
return dev_priv->ips.gfx_power + state2;
|
|
}
|
|
|
|
unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long val;
|
|
|
|
if (!IS_GEN5(dev_priv))
|
|
return 0;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
val = __i915_gfx_val(dev_priv);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return val;
|
|
}
|
|
|
|
/**
|
|
* i915_read_mch_val - return value for IPS use
|
|
*
|
|
* Calculate and return a value for the IPS driver to use when deciding whether
|
|
* we have thermal and power headroom to increase CPU or GPU power budget.
|
|
*/
|
|
unsigned long i915_read_mch_val(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
unsigned long chipset_val, graphics_val, ret = 0;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev)
|
|
goto out_unlock;
|
|
dev_priv = i915_mch_dev;
|
|
|
|
chipset_val = __i915_chipset_val(dev_priv);
|
|
graphics_val = __i915_gfx_val(dev_priv);
|
|
|
|
ret = chipset_val + graphics_val;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_read_mch_val);
|
|
|
|
/**
|
|
* i915_gpu_raise - raise GPU frequency limit
|
|
*
|
|
* Raise the limit; IPS indicates we have thermal headroom.
|
|
*/
|
|
bool i915_gpu_raise(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
bool ret = true;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev) {
|
|
ret = false;
|
|
goto out_unlock;
|
|
}
|
|
dev_priv = i915_mch_dev;
|
|
|
|
if (dev_priv->ips.max_delay > dev_priv->ips.fmax)
|
|
dev_priv->ips.max_delay--;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_gpu_raise);
|
|
|
|
/**
|
|
* i915_gpu_lower - lower GPU frequency limit
|
|
*
|
|
* IPS indicates we're close to a thermal limit, so throttle back the GPU
|
|
* frequency maximum.
|
|
*/
|
|
bool i915_gpu_lower(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
bool ret = true;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev) {
|
|
ret = false;
|
|
goto out_unlock;
|
|
}
|
|
dev_priv = i915_mch_dev;
|
|
|
|
if (dev_priv->ips.max_delay < dev_priv->ips.min_delay)
|
|
dev_priv->ips.max_delay++;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_gpu_lower);
|
|
|
|
/**
|
|
* i915_gpu_busy - indicate GPU business to IPS
|
|
*
|
|
* Tell the IPS driver whether or not the GPU is busy.
|
|
*/
|
|
bool i915_gpu_busy(void)
|
|
{
|
|
bool ret = false;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (i915_mch_dev)
|
|
ret = i915_mch_dev->gt.awake;
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_gpu_busy);
|
|
|
|
/**
|
|
* i915_gpu_turbo_disable - disable graphics turbo
|
|
*
|
|
* Disable graphics turbo by resetting the max frequency and setting the
|
|
* current frequency to the default.
|
|
*/
|
|
bool i915_gpu_turbo_disable(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
bool ret = true;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev) {
|
|
ret = false;
|
|
goto out_unlock;
|
|
}
|
|
dev_priv = i915_mch_dev;
|
|
|
|
dev_priv->ips.max_delay = dev_priv->ips.fstart;
|
|
|
|
if (!ironlake_set_drps(dev_priv, dev_priv->ips.fstart))
|
|
ret = false;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
|
|
|
|
/**
|
|
* Tells the intel_ips driver that the i915 driver is now loaded, if
|
|
* IPS got loaded first.
|
|
*
|
|
* This awkward dance is so that neither module has to depend on the
|
|
* other in order for IPS to do the appropriate communication of
|
|
* GPU turbo limits to i915.
|
|
*/
|
|
static void
|
|
ips_ping_for_i915_load(void)
|
|
{
|
|
void (*link)(void);
|
|
|
|
link = symbol_get(ips_link_to_i915_driver);
|
|
if (link) {
|
|
link();
|
|
symbol_put(ips_link_to_i915_driver);
|
|
}
|
|
}
|
|
|
|
void intel_gpu_ips_init(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* We only register the i915 ips part with intel-ips once everything is
|
|
* set up, to avoid intel-ips sneaking in and reading bogus values. */
|
|
spin_lock_irq(&mchdev_lock);
|
|
i915_mch_dev = dev_priv;
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
ips_ping_for_i915_load();
|
|
}
|
|
|
|
void intel_gpu_ips_teardown(void)
|
|
{
|
|
spin_lock_irq(&mchdev_lock);
|
|
i915_mch_dev = NULL;
|
|
spin_unlock_irq(&mchdev_lock);
|
|
}
|
|
|
|
static void intel_init_emon(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 lcfuse;
|
|
u8 pxw[16];
|
|
int i;
|
|
|
|
/* Disable to program */
|
|
I915_WRITE(ECR, 0);
|
|
POSTING_READ(ECR);
|
|
|
|
/* Program energy weights for various events */
|
|
I915_WRITE(SDEW, 0x15040d00);
|
|
I915_WRITE(CSIEW0, 0x007f0000);
|
|
I915_WRITE(CSIEW1, 0x1e220004);
|
|
I915_WRITE(CSIEW2, 0x04000004);
|
|
|
|
for (i = 0; i < 5; i++)
|
|
I915_WRITE(PEW(i), 0);
|
|
for (i = 0; i < 3; i++)
|
|
I915_WRITE(DEW(i), 0);
|
|
|
|
/* Program P-state weights to account for frequency power adjustment */
|
|
for (i = 0; i < 16; i++) {
|
|
u32 pxvidfreq = I915_READ(PXVFREQ(i));
|
|
unsigned long freq = intel_pxfreq(pxvidfreq);
|
|
unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
|
|
PXVFREQ_PX_SHIFT;
|
|
unsigned long val;
|
|
|
|
val = vid * vid;
|
|
val *= (freq / 1000);
|
|
val *= 255;
|
|
val /= (127*127*900);
|
|
if (val > 0xff)
|
|
DRM_ERROR("bad pxval: %ld\n", val);
|
|
pxw[i] = val;
|
|
}
|
|
/* Render standby states get 0 weight */
|
|
pxw[14] = 0;
|
|
pxw[15] = 0;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
|
|
(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
|
|
I915_WRITE(PXW(i), val);
|
|
}
|
|
|
|
/* Adjust magic regs to magic values (more experimental results) */
|
|
I915_WRITE(OGW0, 0);
|
|
I915_WRITE(OGW1, 0);
|
|
I915_WRITE(EG0, 0x00007f00);
|
|
I915_WRITE(EG1, 0x0000000e);
|
|
I915_WRITE(EG2, 0x000e0000);
|
|
I915_WRITE(EG3, 0x68000300);
|
|
I915_WRITE(EG4, 0x42000000);
|
|
I915_WRITE(EG5, 0x00140031);
|
|
I915_WRITE(EG6, 0);
|
|
I915_WRITE(EG7, 0);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
I915_WRITE(PXWL(i), 0);
|
|
|
|
/* Enable PMON + select events */
|
|
I915_WRITE(ECR, 0x80000019);
|
|
|
|
lcfuse = I915_READ(LCFUSE02);
|
|
|
|
dev_priv->ips.corr = (lcfuse & LCFUSE_HIV_MASK);
|
|
}
|
|
|
|
void intel_init_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
/*
|
|
* RPM depends on RC6 to save restore the GT HW context, so make RC6 a
|
|
* requirement.
|
|
*/
|
|
if (!sanitize_rc6(dev_priv)) {
|
|
DRM_INFO("RC6 disabled, disabling runtime PM support\n");
|
|
intel_runtime_pm_get(dev_priv);
|
|
}
|
|
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
|
|
/* Initialize RPS limits (for userspace) */
|
|
if (IS_CHERRYVIEW(dev_priv))
|
|
cherryview_init_gt_powersave(dev_priv);
|
|
else if (IS_VALLEYVIEW(dev_priv))
|
|
valleyview_init_gt_powersave(dev_priv);
|
|
else if (INTEL_GEN(dev_priv) >= 6)
|
|
gen6_init_rps_frequencies(dev_priv);
|
|
|
|
/* Derive initial user preferences/limits from the hardware limits */
|
|
rps->idle_freq = rps->min_freq;
|
|
rps->cur_freq = rps->idle_freq;
|
|
|
|
rps->max_freq_softlimit = rps->max_freq;
|
|
rps->min_freq_softlimit = rps->min_freq;
|
|
|
|
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
rps->min_freq_softlimit =
|
|
max_t(int,
|
|
rps->efficient_freq,
|
|
intel_freq_opcode(dev_priv, 450));
|
|
|
|
/* After setting max-softlimit, find the overclock max freq */
|
|
if (IS_GEN6(dev_priv) ||
|
|
IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) {
|
|
u32 params = 0;
|
|
|
|
sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, ¶ms);
|
|
if (params & BIT(31)) { /* OC supported */
|
|
DRM_DEBUG_DRIVER("Overclocking supported, max: %dMHz, overclock: %dMHz\n",
|
|
(rps->max_freq & 0xff) * 50,
|
|
(params & 0xff) * 50);
|
|
rps->max_freq = params & 0xff;
|
|
}
|
|
}
|
|
|
|
/* Finally allow us to boost to max by default */
|
|
rps->boost_freq = rps->max_freq;
|
|
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
}
|
|
|
|
void intel_cleanup_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (IS_VALLEYVIEW(dev_priv))
|
|
valleyview_cleanup_gt_powersave(dev_priv);
|
|
|
|
if (!HAS_RC6(dev_priv))
|
|
intel_runtime_pm_put(dev_priv);
|
|
}
|
|
|
|
/**
|
|
* intel_suspend_gt_powersave - suspend PM work and helper threads
|
|
* @dev_priv: i915 device
|
|
*
|
|
* We don't want to disable RC6 or other features here, we just want
|
|
* to make sure any work we've queued has finished and won't bother
|
|
* us while we're suspended.
|
|
*/
|
|
void intel_suspend_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (INTEL_GEN(dev_priv) < 6)
|
|
return;
|
|
|
|
/* gen6_rps_idle() will be called later to disable interrupts */
|
|
}
|
|
|
|
void intel_sanitize_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
dev_priv->gt_pm.rps.enabled = true; /* force RPS disabling */
|
|
dev_priv->gt_pm.rc6.enabled = true; /* force RC6 disabling */
|
|
intel_disable_gt_powersave(dev_priv);
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11)
|
|
gen11_reset_rps_interrupts(dev_priv);
|
|
else
|
|
gen6_reset_rps_interrupts(dev_priv);
|
|
}
|
|
|
|
static inline void intel_disable_llc_pstate(struct drm_i915_private *i915)
|
|
{
|
|
lockdep_assert_held(&i915->pcu_lock);
|
|
|
|
if (!i915->gt_pm.llc_pstate.enabled)
|
|
return;
|
|
|
|
/* Currently there is no HW configuration to be done to disable. */
|
|
|
|
i915->gt_pm.llc_pstate.enabled = false;
|
|
}
|
|
|
|
static void intel_disable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
lockdep_assert_held(&dev_priv->pcu_lock);
|
|
|
|
if (!dev_priv->gt_pm.rc6.enabled)
|
|
return;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 9)
|
|
gen9_disable_rc6(dev_priv);
|
|
else if (IS_CHERRYVIEW(dev_priv))
|
|
cherryview_disable_rc6(dev_priv);
|
|
else if (IS_VALLEYVIEW(dev_priv))
|
|
valleyview_disable_rc6(dev_priv);
|
|
else if (INTEL_GEN(dev_priv) >= 6)
|
|
gen6_disable_rc6(dev_priv);
|
|
|
|
dev_priv->gt_pm.rc6.enabled = false;
|
|
}
|
|
|
|
static void intel_disable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
lockdep_assert_held(&dev_priv->pcu_lock);
|
|
|
|
if (!dev_priv->gt_pm.rps.enabled)
|
|
return;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 9)
|
|
gen9_disable_rps(dev_priv);
|
|
else if (IS_CHERRYVIEW(dev_priv))
|
|
cherryview_disable_rps(dev_priv);
|
|
else if (IS_VALLEYVIEW(dev_priv))
|
|
valleyview_disable_rps(dev_priv);
|
|
else if (INTEL_GEN(dev_priv) >= 6)
|
|
gen6_disable_rps(dev_priv);
|
|
else if (IS_IRONLAKE_M(dev_priv))
|
|
ironlake_disable_drps(dev_priv);
|
|
|
|
dev_priv->gt_pm.rps.enabled = false;
|
|
}
|
|
|
|
void intel_disable_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
|
|
intel_disable_rc6(dev_priv);
|
|
intel_disable_rps(dev_priv);
|
|
if (HAS_LLC(dev_priv))
|
|
intel_disable_llc_pstate(dev_priv);
|
|
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
}
|
|
|
|
static inline void intel_enable_llc_pstate(struct drm_i915_private *i915)
|
|
{
|
|
lockdep_assert_held(&i915->pcu_lock);
|
|
|
|
if (i915->gt_pm.llc_pstate.enabled)
|
|
return;
|
|
|
|
gen6_update_ring_freq(i915);
|
|
|
|
i915->gt_pm.llc_pstate.enabled = true;
|
|
}
|
|
|
|
static void intel_enable_rc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
lockdep_assert_held(&dev_priv->pcu_lock);
|
|
|
|
if (dev_priv->gt_pm.rc6.enabled)
|
|
return;
|
|
|
|
if (IS_CHERRYVIEW(dev_priv))
|
|
cherryview_enable_rc6(dev_priv);
|
|
else if (IS_VALLEYVIEW(dev_priv))
|
|
valleyview_enable_rc6(dev_priv);
|
|
else if (INTEL_GEN(dev_priv) >= 9)
|
|
gen9_enable_rc6(dev_priv);
|
|
else if (IS_BROADWELL(dev_priv))
|
|
gen8_enable_rc6(dev_priv);
|
|
else if (INTEL_GEN(dev_priv) >= 6)
|
|
gen6_enable_rc6(dev_priv);
|
|
|
|
dev_priv->gt_pm.rc6.enabled = true;
|
|
}
|
|
|
|
static void intel_enable_rps(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
lockdep_assert_held(&dev_priv->pcu_lock);
|
|
|
|
if (rps->enabled)
|
|
return;
|
|
|
|
if (IS_CHERRYVIEW(dev_priv)) {
|
|
cherryview_enable_rps(dev_priv);
|
|
} else if (IS_VALLEYVIEW(dev_priv)) {
|
|
valleyview_enable_rps(dev_priv);
|
|
} else if (INTEL_GEN(dev_priv) >= 9) {
|
|
gen9_enable_rps(dev_priv);
|
|
} else if (IS_BROADWELL(dev_priv)) {
|
|
gen8_enable_rps(dev_priv);
|
|
} else if (INTEL_GEN(dev_priv) >= 6) {
|
|
gen6_enable_rps(dev_priv);
|
|
} else if (IS_IRONLAKE_M(dev_priv)) {
|
|
ironlake_enable_drps(dev_priv);
|
|
intel_init_emon(dev_priv);
|
|
}
|
|
|
|
WARN_ON(rps->max_freq < rps->min_freq);
|
|
WARN_ON(rps->idle_freq > rps->max_freq);
|
|
|
|
WARN_ON(rps->efficient_freq < rps->min_freq);
|
|
WARN_ON(rps->efficient_freq > rps->max_freq);
|
|
|
|
rps->enabled = true;
|
|
}
|
|
|
|
void intel_enable_gt_powersave(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* Powersaving is controlled by the host when inside a VM */
|
|
if (intel_vgpu_active(dev_priv))
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->pcu_lock);
|
|
|
|
if (HAS_RC6(dev_priv))
|
|
intel_enable_rc6(dev_priv);
|
|
intel_enable_rps(dev_priv);
|
|
if (HAS_LLC(dev_priv))
|
|
intel_enable_llc_pstate(dev_priv);
|
|
|
|
mutex_unlock(&dev_priv->pcu_lock);
|
|
}
|
|
|
|
static void ibx_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
/*
|
|
* On Ibex Peak and Cougar Point, we need to disable clock
|
|
* gating for the panel power sequencer or it will fail to
|
|
* start up when no ports are active.
|
|
*/
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
|
|
}
|
|
|
|
static void g4x_disable_trickle_feed(struct drm_i915_private *dev_priv)
|
|
{
|
|
enum pipe pipe;
|
|
|
|
for_each_pipe(dev_priv, pipe) {
|
|
I915_WRITE(DSPCNTR(pipe),
|
|
I915_READ(DSPCNTR(pipe)) |
|
|
DISPPLANE_TRICKLE_FEED_DISABLE);
|
|
|
|
I915_WRITE(DSPSURF(pipe), I915_READ(DSPSURF(pipe)));
|
|
POSTING_READ(DSPSURF(pipe));
|
|
}
|
|
}
|
|
|
|
static void ilk_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
|
|
|
|
/*
|
|
* Required for FBC
|
|
* WaFbcDisableDpfcClockGating:ilk
|
|
*/
|
|
dspclk_gate |= ILK_DPFCRUNIT_CLOCK_GATE_DISABLE |
|
|
ILK_DPFCUNIT_CLOCK_GATE_DISABLE |
|
|
ILK_DPFDUNIT_CLOCK_GATE_ENABLE;
|
|
|
|
I915_WRITE(PCH_3DCGDIS0,
|
|
MARIUNIT_CLOCK_GATE_DISABLE |
|
|
SVSMUNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(PCH_3DCGDIS1,
|
|
VFMUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/*
|
|
* According to the spec the following bits should be set in
|
|
* order to enable memory self-refresh
|
|
* The bit 22/21 of 0x42004
|
|
* The bit 5 of 0x42020
|
|
* The bit 15 of 0x45000
|
|
*/
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
(I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE | ILK_VSDPFD_FULL));
|
|
dspclk_gate |= ILK_DPARBUNIT_CLOCK_GATE_ENABLE;
|
|
I915_WRITE(DISP_ARB_CTL,
|
|
(I915_READ(DISP_ARB_CTL) |
|
|
DISP_FBC_WM_DIS));
|
|
|
|
/*
|
|
* Based on the document from hardware guys the following bits
|
|
* should be set unconditionally in order to enable FBC.
|
|
* The bit 22 of 0x42000
|
|
* The bit 22 of 0x42004
|
|
* The bit 7,8,9 of 0x42020.
|
|
*/
|
|
if (IS_IRONLAKE_M(dev_priv)) {
|
|
/* WaFbcAsynchFlipDisableFbcQueue:ilk */
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN1,
|
|
I915_READ(ILK_DISPLAY_CHICKEN1) |
|
|
ILK_FBCQ_DIS);
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE);
|
|
}
|
|
|
|
I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_ELPIN_409_SELECT);
|
|
I915_WRITE(_3D_CHICKEN2,
|
|
_3D_CHICKEN2_WM_READ_PIPELINED << 16 |
|
|
_3D_CHICKEN2_WM_READ_PIPELINED);
|
|
|
|
/* WaDisableRenderCachePipelinedFlush:ilk */
|
|
I915_WRITE(CACHE_MODE_0,
|
|
_MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
|
|
|
|
/* WaDisable_RenderCache_OperationalFlush:ilk */
|
|
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
|
|
|
|
g4x_disable_trickle_feed(dev_priv);
|
|
|
|
ibx_init_clock_gating(dev_priv);
|
|
}
|
|
|
|
static void cpt_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
int pipe;
|
|
uint32_t val;
|
|
|
|
/*
|
|
* On Ibex Peak and Cougar Point, we need to disable clock
|
|
* gating for the panel power sequencer or it will fail to
|
|
* start up when no ports are active.
|
|
*/
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE |
|
|
PCH_DPLUNIT_CLOCK_GATE_DISABLE |
|
|
PCH_CPUNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
|
|
DPLS_EDP_PPS_FIX_DIS);
|
|
/* The below fixes the weird display corruption, a few pixels shifted
|
|
* downward, on (only) LVDS of some HP laptops with IVY.
|
|
*/
|
|
for_each_pipe(dev_priv, pipe) {
|
|
val = I915_READ(TRANS_CHICKEN2(pipe));
|
|
val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
|
|
val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
|
|
if (dev_priv->vbt.fdi_rx_polarity_inverted)
|
|
val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
|
|
val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
|
|
val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER;
|
|
val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH;
|
|
I915_WRITE(TRANS_CHICKEN2(pipe), val);
|
|
}
|
|
/* WADP0ClockGatingDisable */
|
|
for_each_pipe(dev_priv, pipe) {
|
|
I915_WRITE(TRANS_CHICKEN1(pipe),
|
|
TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
|
|
}
|
|
}
|
|
|
|
static void gen6_check_mch_setup(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(MCH_SSKPD);
|
|
if ((tmp & MCH_SSKPD_WM0_MASK) != MCH_SSKPD_WM0_VAL)
|
|
DRM_DEBUG_KMS("Wrong MCH_SSKPD value: 0x%08x This can cause underruns.\n",
|
|
tmp);
|
|
}
|
|
|
|
static void gen6_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
|
|
|
|
I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_ELPIN_409_SELECT);
|
|
|
|
/* WaDisableHiZPlanesWhenMSAAEnabled:snb */
|
|
I915_WRITE(_3D_CHICKEN,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB));
|
|
|
|
/* WaDisable_RenderCache_OperationalFlush:snb */
|
|
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
|
|
|
|
/*
|
|
* BSpec recoomends 8x4 when MSAA is used,
|
|
* however in practice 16x4 seems fastest.
|
|
*
|
|
* Note that PS/WM thread counts depend on the WIZ hashing
|
|
* disable bit, which we don't touch here, but it's good
|
|
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
|
|
*/
|
|
I915_WRITE(GEN6_GT_MODE,
|
|
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
|
|
|
|
I915_WRITE(CACHE_MODE_0,
|
|
_MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB));
|
|
|
|
I915_WRITE(GEN6_UCGCTL1,
|
|
I915_READ(GEN6_UCGCTL1) |
|
|
GEN6_BLBUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_CSUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
|
|
* gating disable must be set. Failure to set it results in
|
|
* flickering pixels due to Z write ordering failures after
|
|
* some amount of runtime in the Mesa "fire" demo, and Unigine
|
|
* Sanctuary and Tropics, and apparently anything else with
|
|
* alpha test or pixel discard.
|
|
*
|
|
* According to the spec, bit 11 (RCCUNIT) must also be set,
|
|
* but we didn't debug actual testcases to find it out.
|
|
*
|
|
* WaDisableRCCUnitClockGating:snb
|
|
* WaDisableRCPBUnitClockGating:snb
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2,
|
|
GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaStripsFansDisableFastClipPerformanceFix:snb */
|
|
I915_WRITE(_3D_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL));
|
|
|
|
/*
|
|
* Bspec says:
|
|
* "This bit must be set if 3DSTATE_CLIP clip mode is set to normal and
|
|
* 3DSTATE_SF number of SF output attributes is more than 16."
|
|
*/
|
|
I915_WRITE(_3D_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH));
|
|
|
|
/*
|
|
* According to the spec the following bits should be
|
|
* set in order to enable memory self-refresh and fbc:
|
|
* The bit21 and bit22 of 0x42000
|
|
* The bit21 and bit22 of 0x42004
|
|
* The bit5 and bit7 of 0x42020
|
|
* The bit14 of 0x70180
|
|
* The bit14 of 0x71180
|
|
*
|
|
* WaFbcAsynchFlipDisableFbcQueue:snb
|
|
*/
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN1,
|
|
I915_READ(ILK_DISPLAY_CHICKEN1) |
|
|
ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE | ILK_VSDPFD_FULL);
|
|
I915_WRITE(ILK_DSPCLK_GATE_D,
|
|
I915_READ(ILK_DSPCLK_GATE_D) |
|
|
ILK_DPARBUNIT_CLOCK_GATE_ENABLE |
|
|
ILK_DPFDUNIT_CLOCK_GATE_ENABLE);
|
|
|
|
g4x_disable_trickle_feed(dev_priv);
|
|
|
|
cpt_init_clock_gating(dev_priv);
|
|
|
|
gen6_check_mch_setup(dev_priv);
|
|
}
|
|
|
|
static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE);
|
|
|
|
/*
|
|
* WaVSThreadDispatchOverride:ivb,vlv
|
|
*
|
|
* This actually overrides the dispatch
|
|
* mode for all thread types.
|
|
*/
|
|
reg &= ~GEN7_FF_SCHED_MASK;
|
|
reg |= GEN7_FF_TS_SCHED_HW;
|
|
reg |= GEN7_FF_VS_SCHED_HW;
|
|
reg |= GEN7_FF_DS_SCHED_HW;
|
|
|
|
I915_WRITE(GEN7_FF_THREAD_MODE, reg);
|
|
}
|
|
|
|
static void lpt_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
/*
|
|
* TODO: this bit should only be enabled when really needed, then
|
|
* disabled when not needed anymore in order to save power.
|
|
*/
|
|
if (HAS_PCH_LPT_LP(dev_priv))
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D,
|
|
I915_READ(SOUTH_DSPCLK_GATE_D) |
|
|
PCH_LP_PARTITION_LEVEL_DISABLE);
|
|
|
|
/* WADPOClockGatingDisable:hsw */
|
|
I915_WRITE(TRANS_CHICKEN1(PIPE_A),
|
|
I915_READ(TRANS_CHICKEN1(PIPE_A)) |
|
|
TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
|
|
}
|
|
|
|
static void lpt_suspend_hw(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (HAS_PCH_LPT_LP(dev_priv)) {
|
|
uint32_t val = I915_READ(SOUTH_DSPCLK_GATE_D);
|
|
|
|
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
|
|
}
|
|
}
|
|
|
|
static void gen8_set_l3sqc_credits(struct drm_i915_private *dev_priv,
|
|
int general_prio_credits,
|
|
int high_prio_credits)
|
|
{
|
|
u32 misccpctl;
|
|
u32 val;
|
|
|
|
/* WaTempDisableDOPClkGating:bdw */
|
|
misccpctl = I915_READ(GEN7_MISCCPCTL);
|
|
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
|
|
|
|
val = I915_READ(GEN8_L3SQCREG1);
|
|
val &= ~L3_PRIO_CREDITS_MASK;
|
|
val |= L3_GENERAL_PRIO_CREDITS(general_prio_credits);
|
|
val |= L3_HIGH_PRIO_CREDITS(high_prio_credits);
|
|
I915_WRITE(GEN8_L3SQCREG1, val);
|
|
|
|
/*
|
|
* Wait at least 100 clocks before re-enabling clock gating.
|
|
* See the definition of L3SQCREG1 in BSpec.
|
|
*/
|
|
POSTING_READ(GEN8_L3SQCREG1);
|
|
udelay(1);
|
|
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
|
|
}
|
|
|
|
static void icl_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* This is not an Wa. Enable to reduce Sampler power */
|
|
I915_WRITE(GEN10_DFR_RATIO_EN_AND_CHICKEN,
|
|
I915_READ(GEN10_DFR_RATIO_EN_AND_CHICKEN) & ~DFR_DISABLE);
|
|
}
|
|
|
|
static void cnp_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (!HAS_PCH_CNP(dev_priv))
|
|
return;
|
|
|
|
/* Display WA #1181 WaSouthDisplayDisablePWMCGEGating: cnp */
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, I915_READ(SOUTH_DSPCLK_GATE_D) |
|
|
CNP_PWM_CGE_GATING_DISABLE);
|
|
}
|
|
|
|
static void cnl_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
cnp_init_clock_gating(dev_priv);
|
|
|
|
/* This is not an Wa. Enable for better image quality */
|
|
I915_WRITE(_3D_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN3_AA_LINE_QUALITY_FIX_ENABLE));
|
|
|
|
/* WaEnableChickenDCPR:cnl */
|
|
I915_WRITE(GEN8_CHICKEN_DCPR_1,
|
|
I915_READ(GEN8_CHICKEN_DCPR_1) | MASK_WAKEMEM);
|
|
|
|
/* WaFbcWakeMemOn:cnl */
|
|
I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
|
|
DISP_FBC_MEMORY_WAKE);
|
|
|
|
val = I915_READ(SLICE_UNIT_LEVEL_CLKGATE);
|
|
/* ReadHitWriteOnlyDisable:cnl */
|
|
val |= RCCUNIT_CLKGATE_DIS;
|
|
/* WaSarbUnitClockGatingDisable:cnl (pre-prod) */
|
|
if (IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))
|
|
val |= SARBUNIT_CLKGATE_DIS;
|
|
I915_WRITE(SLICE_UNIT_LEVEL_CLKGATE, val);
|
|
|
|
/* Wa_2201832410:cnl */
|
|
val = I915_READ(SUBSLICE_UNIT_LEVEL_CLKGATE);
|
|
val |= GWUNIT_CLKGATE_DIS;
|
|
I915_WRITE(SUBSLICE_UNIT_LEVEL_CLKGATE, val);
|
|
|
|
/* WaDisableVFclkgate:cnl */
|
|
/* WaVFUnitClockGatingDisable:cnl */
|
|
val = I915_READ(UNSLICE_UNIT_LEVEL_CLKGATE);
|
|
val |= VFUNIT_CLKGATE_DIS;
|
|
I915_WRITE(UNSLICE_UNIT_LEVEL_CLKGATE, val);
|
|
}
|
|
|
|
static void cfl_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
cnp_init_clock_gating(dev_priv);
|
|
gen9_init_clock_gating(dev_priv);
|
|
|
|
/* WaFbcNukeOnHostModify:cfl */
|
|
I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) |
|
|
ILK_DPFC_NUKE_ON_ANY_MODIFICATION);
|
|
}
|
|
|
|
static void kbl_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
gen9_init_clock_gating(dev_priv);
|
|
|
|
/* WaDisableSDEUnitClockGating:kbl */
|
|
if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0))
|
|
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
|
|
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaDisableGamClockGating:kbl */
|
|
if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0))
|
|
I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) |
|
|
GEN6_GAMUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaFbcNukeOnHostModify:kbl */
|
|
I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) |
|
|
ILK_DPFC_NUKE_ON_ANY_MODIFICATION);
|
|
}
|
|
|
|
static void skl_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
gen9_init_clock_gating(dev_priv);
|
|
|
|
/* WAC6entrylatency:skl */
|
|
I915_WRITE(FBC_LLC_READ_CTRL, I915_READ(FBC_LLC_READ_CTRL) |
|
|
FBC_LLC_FULLY_OPEN);
|
|
|
|
/* WaFbcNukeOnHostModify:skl */
|
|
I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) |
|
|
ILK_DPFC_NUKE_ON_ANY_MODIFICATION);
|
|
}
|
|
|
|
static void bdw_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* The GTT cache must be disabled if the system is using 2M pages. */
|
|
bool can_use_gtt_cache = !HAS_PAGE_SIZES(dev_priv,
|
|
I915_GTT_PAGE_SIZE_2M);
|
|
enum pipe pipe;
|
|
|
|
/* WaSwitchSolVfFArbitrationPriority:bdw */
|
|
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
|
|
|
|
/* WaPsrDPAMaskVBlankInSRD:bdw */
|
|
I915_WRITE(CHICKEN_PAR1_1,
|
|
I915_READ(CHICKEN_PAR1_1) | DPA_MASK_VBLANK_SRD);
|
|
|
|
/* WaPsrDPRSUnmaskVBlankInSRD:bdw */
|
|
for_each_pipe(dev_priv, pipe) {
|
|
I915_WRITE(CHICKEN_PIPESL_1(pipe),
|
|
I915_READ(CHICKEN_PIPESL_1(pipe)) |
|
|
BDW_DPRS_MASK_VBLANK_SRD);
|
|
}
|
|
|
|
/* WaVSRefCountFullforceMissDisable:bdw */
|
|
/* WaDSRefCountFullforceMissDisable:bdw */
|
|
I915_WRITE(GEN7_FF_THREAD_MODE,
|
|
I915_READ(GEN7_FF_THREAD_MODE) &
|
|
~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME));
|
|
|
|
I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
|
|
_MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE));
|
|
|
|
/* WaDisableSDEUnitClockGating:bdw */
|
|
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
|
|
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaProgramL3SqcReg1Default:bdw */
|
|
gen8_set_l3sqc_credits(dev_priv, 30, 2);
|
|
|
|
/* WaGttCachingOffByDefault:bdw */
|
|
I915_WRITE(HSW_GTT_CACHE_EN, can_use_gtt_cache ? GTT_CACHE_EN_ALL : 0);
|
|
|
|
/* WaKVMNotificationOnConfigChange:bdw */
|
|
I915_WRITE(CHICKEN_PAR2_1, I915_READ(CHICKEN_PAR2_1)
|
|
| KVM_CONFIG_CHANGE_NOTIFICATION_SELECT);
|
|
|
|
lpt_init_clock_gating(dev_priv);
|
|
|
|
/* WaDisableDopClockGating:bdw
|
|
*
|
|
* Also see the CHICKEN2 write in bdw_init_workarounds() to disable DOP
|
|
* clock gating.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL1,
|
|
I915_READ(GEN6_UCGCTL1) | GEN6_EU_TCUNIT_CLOCK_GATE_DISABLE);
|
|
}
|
|
|
|
static void hsw_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* L3 caching of data atomics doesn't work -- disable it. */
|
|
I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE);
|
|
I915_WRITE(HSW_ROW_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE));
|
|
|
|
/* This is required by WaCatErrorRejectionIssue:hsw */
|
|
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
|
|
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
|
|
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
|
|
|
|
/* WaVSRefCountFullforceMissDisable:hsw */
|
|
I915_WRITE(GEN7_FF_THREAD_MODE,
|
|
I915_READ(GEN7_FF_THREAD_MODE) & ~GEN7_FF_VS_REF_CNT_FFME);
|
|
|
|
/* WaDisable_RenderCache_OperationalFlush:hsw */
|
|
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
|
|
|
|
/* enable HiZ Raw Stall Optimization */
|
|
I915_WRITE(CACHE_MODE_0_GEN7,
|
|
_MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE));
|
|
|
|
/* WaDisable4x2SubspanOptimization:hsw */
|
|
I915_WRITE(CACHE_MODE_1,
|
|
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
|
|
|
|
/*
|
|
* BSpec recommends 8x4 when MSAA is used,
|
|
* however in practice 16x4 seems fastest.
|
|
*
|
|
* Note that PS/WM thread counts depend on the WIZ hashing
|
|
* disable bit, which we don't touch here, but it's good
|
|
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
|
|
*/
|
|
I915_WRITE(GEN7_GT_MODE,
|
|
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
|
|
|
|
/* WaSampleCChickenBitEnable:hsw */
|
|
I915_WRITE(HALF_SLICE_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(HSW_SAMPLE_C_PERFORMANCE));
|
|
|
|
/* WaSwitchSolVfFArbitrationPriority:hsw */
|
|
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
|
|
|
|
lpt_init_clock_gating(dev_priv);
|
|
}
|
|
|
|
static void ivb_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t snpcr;
|
|
|
|
I915_WRITE(ILK_DSPCLK_GATE_D, ILK_VRHUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaDisableEarlyCull:ivb */
|
|
I915_WRITE(_3D_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
|
|
|
|
/* WaDisableBackToBackFlipFix:ivb */
|
|
I915_WRITE(IVB_CHICKEN3,
|
|
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
|
|
CHICKEN3_DGMG_DONE_FIX_DISABLE);
|
|
|
|
/* WaDisablePSDDualDispatchEnable:ivb */
|
|
if (IS_IVB_GT1(dev_priv))
|
|
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
|
|
_MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
|
|
|
|
/* WaDisable_RenderCache_OperationalFlush:ivb */
|
|
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
|
|
|
|
/* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */
|
|
I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
|
|
GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
|
|
|
|
/* WaApplyL3ControlAndL3ChickenMode:ivb */
|
|
I915_WRITE(GEN7_L3CNTLREG1,
|
|
GEN7_WA_FOR_GEN7_L3_CONTROL);
|
|
I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
|
|
GEN7_WA_L3_CHICKEN_MODE);
|
|
if (IS_IVB_GT1(dev_priv))
|
|
I915_WRITE(GEN7_ROW_CHICKEN2,
|
|
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
|
|
else {
|
|
/* must write both registers */
|
|
I915_WRITE(GEN7_ROW_CHICKEN2,
|
|
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
|
|
I915_WRITE(GEN7_ROW_CHICKEN2_GT2,
|
|
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
|
|
}
|
|
|
|
/* WaForceL3Serialization:ivb */
|
|
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
|
|
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
|
|
|
|
/*
|
|
* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
|
|
* This implements the WaDisableRCZUnitClockGating:ivb workaround.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2,
|
|
GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* This is required by WaCatErrorRejectionIssue:ivb */
|
|
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
|
|
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
|
|
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
|
|
|
|
g4x_disable_trickle_feed(dev_priv);
|
|
|
|
gen7_setup_fixed_func_scheduler(dev_priv);
|
|
|
|
if (0) { /* causes HiZ corruption on ivb:gt1 */
|
|
/* enable HiZ Raw Stall Optimization */
|
|
I915_WRITE(CACHE_MODE_0_GEN7,
|
|
_MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE));
|
|
}
|
|
|
|
/* WaDisable4x2SubspanOptimization:ivb */
|
|
I915_WRITE(CACHE_MODE_1,
|
|
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
|
|
|
|
/*
|
|
* BSpec recommends 8x4 when MSAA is used,
|
|
* however in practice 16x4 seems fastest.
|
|
*
|
|
* Note that PS/WM thread counts depend on the WIZ hashing
|
|
* disable bit, which we don't touch here, but it's good
|
|
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
|
|
*/
|
|
I915_WRITE(GEN7_GT_MODE,
|
|
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
|
|
|
|
snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
|
|
snpcr &= ~GEN6_MBC_SNPCR_MASK;
|
|
snpcr |= GEN6_MBC_SNPCR_MED;
|
|
I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr);
|
|
|
|
if (!HAS_PCH_NOP(dev_priv))
|
|
cpt_init_clock_gating(dev_priv);
|
|
|
|
gen6_check_mch_setup(dev_priv);
|
|
}
|
|
|
|
static void vlv_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* WaDisableEarlyCull:vlv */
|
|
I915_WRITE(_3D_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
|
|
|
|
/* WaDisableBackToBackFlipFix:vlv */
|
|
I915_WRITE(IVB_CHICKEN3,
|
|
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
|
|
CHICKEN3_DGMG_DONE_FIX_DISABLE);
|
|
|
|
/* WaPsdDispatchEnable:vlv */
|
|
/* WaDisablePSDDualDispatchEnable:vlv */
|
|
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
|
|
_MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP |
|
|
GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
|
|
|
|
/* WaDisable_RenderCache_OperationalFlush:vlv */
|
|
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
|
|
|
|
/* WaForceL3Serialization:vlv */
|
|
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
|
|
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
|
|
|
|
/* WaDisableDopClockGating:vlv */
|
|
I915_WRITE(GEN7_ROW_CHICKEN2,
|
|
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
|
|
|
|
/* This is required by WaCatErrorRejectionIssue:vlv */
|
|
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
|
|
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
|
|
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
|
|
|
|
gen7_setup_fixed_func_scheduler(dev_priv);
|
|
|
|
/*
|
|
* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
|
|
* This implements the WaDisableRCZUnitClockGating:vlv workaround.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2,
|
|
GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaDisableL3Bank2xClockGate:vlv
|
|
* Disabling L3 clock gating- MMIO 940c[25] = 1
|
|
* Set bit 25, to disable L3_BANK_2x_CLK_GATING */
|
|
I915_WRITE(GEN7_UCGCTL4,
|
|
I915_READ(GEN7_UCGCTL4) | GEN7_L3BANK2X_CLOCK_GATE_DISABLE);
|
|
|
|
/*
|
|
* BSpec says this must be set, even though
|
|
* WaDisable4x2SubspanOptimization isn't listed for VLV.
|
|
*/
|
|
I915_WRITE(CACHE_MODE_1,
|
|
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
|
|
|
|
/*
|
|
* BSpec recommends 8x4 when MSAA is used,
|
|
* however in practice 16x4 seems fastest.
|
|
*
|
|
* Note that PS/WM thread counts depend on the WIZ hashing
|
|
* disable bit, which we don't touch here, but it's good
|
|
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
|
|
*/
|
|
I915_WRITE(GEN7_GT_MODE,
|
|
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
|
|
|
|
/*
|
|
* WaIncreaseL3CreditsForVLVB0:vlv
|
|
* This is the hardware default actually.
|
|
*/
|
|
I915_WRITE(GEN7_L3SQCREG1, VLV_B0_WA_L3SQCREG1_VALUE);
|
|
|
|
/*
|
|
* WaDisableVLVClockGating_VBIIssue:vlv
|
|
* Disable clock gating on th GCFG unit to prevent a delay
|
|
* in the reporting of vblank events.
|
|
*/
|
|
I915_WRITE(VLV_GUNIT_CLOCK_GATE, GCFG_DIS);
|
|
}
|
|
|
|
static void chv_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* WaVSRefCountFullforceMissDisable:chv */
|
|
/* WaDSRefCountFullforceMissDisable:chv */
|
|
I915_WRITE(GEN7_FF_THREAD_MODE,
|
|
I915_READ(GEN7_FF_THREAD_MODE) &
|
|
~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME));
|
|
|
|
/* WaDisableSemaphoreAndSyncFlipWait:chv */
|
|
I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
|
|
_MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE));
|
|
|
|
/* WaDisableCSUnitClockGating:chv */
|
|
I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) |
|
|
GEN6_CSUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaDisableSDEUnitClockGating:chv */
|
|
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
|
|
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/*
|
|
* WaProgramL3SqcReg1Default:chv
|
|
* See gfxspecs/Related Documents/Performance Guide/
|
|
* LSQC Setting Recommendations.
|
|
*/
|
|
gen8_set_l3sqc_credits(dev_priv, 38, 2);
|
|
|
|
/*
|
|
* GTT cache may not work with big pages, so if those
|
|
* are ever enabled GTT cache may need to be disabled.
|
|
*/
|
|
I915_WRITE(HSW_GTT_CACHE_EN, GTT_CACHE_EN_ALL);
|
|
}
|
|
|
|
static void g4x_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t dspclk_gate;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, 0);
|
|
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
|
|
GS_UNIT_CLOCK_GATE_DISABLE |
|
|
CL_UNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RAMCLK_GATE_D, 0);
|
|
dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
|
|
OVRUNIT_CLOCK_GATE_DISABLE |
|
|
OVCUNIT_CLOCK_GATE_DISABLE;
|
|
if (IS_GM45(dev_priv))
|
|
dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
|
|
I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
/* WaDisableRenderCachePipelinedFlush */
|
|
I915_WRITE(CACHE_MODE_0,
|
|
_MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
|
|
|
|
/* WaDisable_RenderCache_OperationalFlush:g4x */
|
|
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
|
|
|
|
g4x_disable_trickle_feed(dev_priv);
|
|
}
|
|
|
|
static void i965gm_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RENCLK_GATE_D2, 0);
|
|
I915_WRITE(DSPCLK_GATE_D, 0);
|
|
I915_WRITE(RAMCLK_GATE_D, 0);
|
|
I915_WRITE16(DEUC, 0);
|
|
I915_WRITE(MI_ARB_STATE,
|
|
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
|
|
|
|
/* WaDisable_RenderCache_OperationalFlush:gen4 */
|
|
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
|
|
}
|
|
|
|
static void i965g_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
|
|
I965_RCC_CLOCK_GATE_DISABLE |
|
|
I965_RCPB_CLOCK_GATE_DISABLE |
|
|
I965_ISC_CLOCK_GATE_DISABLE |
|
|
I965_FBC_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RENCLK_GATE_D2, 0);
|
|
I915_WRITE(MI_ARB_STATE,
|
|
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
|
|
|
|
/* WaDisable_RenderCache_OperationalFlush:gen4 */
|
|
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
|
|
}
|
|
|
|
static void gen3_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 dstate = I915_READ(D_STATE);
|
|
|
|
dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
|
|
DSTATE_DOT_CLOCK_GATING;
|
|
I915_WRITE(D_STATE, dstate);
|
|
|
|
if (IS_PINEVIEW(dev_priv))
|
|
I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY));
|
|
|
|
/* IIR "flip pending" means done if this bit is set */
|
|
I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
|
|
|
|
/* interrupts should cause a wake up from C3 */
|
|
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN));
|
|
|
|
/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
|
|
I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE));
|
|
|
|
I915_WRITE(MI_ARB_STATE,
|
|
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
|
|
}
|
|
|
|
static void i85x_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
|
|
|
|
/* interrupts should cause a wake up from C3 */
|
|
I915_WRITE(MI_STATE, _MASKED_BIT_ENABLE(MI_AGPBUSY_INT_EN) |
|
|
_MASKED_BIT_DISABLE(MI_AGPBUSY_830_MODE));
|
|
|
|
I915_WRITE(MEM_MODE,
|
|
_MASKED_BIT_ENABLE(MEM_DISPLAY_TRICKLE_FEED_DISABLE));
|
|
}
|
|
|
|
static void i830_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(MEM_MODE,
|
|
_MASKED_BIT_ENABLE(MEM_DISPLAY_A_TRICKLE_FEED_DISABLE) |
|
|
_MASKED_BIT_ENABLE(MEM_DISPLAY_B_TRICKLE_FEED_DISABLE));
|
|
}
|
|
|
|
void intel_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
dev_priv->display.init_clock_gating(dev_priv);
|
|
}
|
|
|
|
void intel_suspend_hw(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (HAS_PCH_LPT(dev_priv))
|
|
lpt_suspend_hw(dev_priv);
|
|
}
|
|
|
|
static void nop_init_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
DRM_DEBUG_KMS("No clock gating settings or workarounds applied.\n");
|
|
}
|
|
|
|
/**
|
|
* intel_init_clock_gating_hooks - setup the clock gating hooks
|
|
* @dev_priv: device private
|
|
*
|
|
* Setup the hooks that configure which clocks of a given platform can be
|
|
* gated and also apply various GT and display specific workarounds for these
|
|
* platforms. Note that some GT specific workarounds are applied separately
|
|
* when GPU contexts or batchbuffers start their execution.
|
|
*/
|
|
void intel_init_clock_gating_hooks(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (IS_ICELAKE(dev_priv))
|
|
dev_priv->display.init_clock_gating = icl_init_clock_gating;
|
|
else if (IS_CANNONLAKE(dev_priv))
|
|
dev_priv->display.init_clock_gating = cnl_init_clock_gating;
|
|
else if (IS_COFFEELAKE(dev_priv))
|
|
dev_priv->display.init_clock_gating = cfl_init_clock_gating;
|
|
else if (IS_SKYLAKE(dev_priv))
|
|
dev_priv->display.init_clock_gating = skl_init_clock_gating;
|
|
else if (IS_KABYLAKE(dev_priv))
|
|
dev_priv->display.init_clock_gating = kbl_init_clock_gating;
|
|
else if (IS_BROXTON(dev_priv))
|
|
dev_priv->display.init_clock_gating = bxt_init_clock_gating;
|
|
else if (IS_GEMINILAKE(dev_priv))
|
|
dev_priv->display.init_clock_gating = glk_init_clock_gating;
|
|
else if (IS_BROADWELL(dev_priv))
|
|
dev_priv->display.init_clock_gating = bdw_init_clock_gating;
|
|
else if (IS_CHERRYVIEW(dev_priv))
|
|
dev_priv->display.init_clock_gating = chv_init_clock_gating;
|
|
else if (IS_HASWELL(dev_priv))
|
|
dev_priv->display.init_clock_gating = hsw_init_clock_gating;
|
|
else if (IS_IVYBRIDGE(dev_priv))
|
|
dev_priv->display.init_clock_gating = ivb_init_clock_gating;
|
|
else if (IS_VALLEYVIEW(dev_priv))
|
|
dev_priv->display.init_clock_gating = vlv_init_clock_gating;
|
|
else if (IS_GEN6(dev_priv))
|
|
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
|
|
else if (IS_GEN5(dev_priv))
|
|
dev_priv->display.init_clock_gating = ilk_init_clock_gating;
|
|
else if (IS_G4X(dev_priv))
|
|
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
|
|
else if (IS_I965GM(dev_priv))
|
|
dev_priv->display.init_clock_gating = i965gm_init_clock_gating;
|
|
else if (IS_I965G(dev_priv))
|
|
dev_priv->display.init_clock_gating = i965g_init_clock_gating;
|
|
else if (IS_GEN3(dev_priv))
|
|
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
|
|
else if (IS_I85X(dev_priv) || IS_I865G(dev_priv))
|
|
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
|
|
else if (IS_GEN2(dev_priv))
|
|
dev_priv->display.init_clock_gating = i830_init_clock_gating;
|
|
else {
|
|
MISSING_CASE(INTEL_DEVID(dev_priv));
|
|
dev_priv->display.init_clock_gating = nop_init_clock_gating;
|
|
}
|
|
}
|
|
|
|
/* Set up chip specific power management-related functions */
|
|
void intel_init_pm(struct drm_i915_private *dev_priv)
|
|
{
|
|
intel_fbc_init(dev_priv);
|
|
|
|
/* For cxsr */
|
|
if (IS_PINEVIEW(dev_priv))
|
|
i915_pineview_get_mem_freq(dev_priv);
|
|
else if (IS_GEN5(dev_priv))
|
|
i915_ironlake_get_mem_freq(dev_priv);
|
|
|
|
/* For FIFO watermark updates */
|
|
if (INTEL_GEN(dev_priv) >= 9) {
|
|
skl_setup_wm_latency(dev_priv);
|
|
dev_priv->display.initial_watermarks = skl_initial_wm;
|
|
dev_priv->display.atomic_update_watermarks = skl_atomic_update_crtc_wm;
|
|
dev_priv->display.compute_global_watermarks = skl_compute_wm;
|
|
} else if (HAS_PCH_SPLIT(dev_priv)) {
|
|
ilk_setup_wm_latency(dev_priv);
|
|
|
|
if ((IS_GEN5(dev_priv) && dev_priv->wm.pri_latency[1] &&
|
|
dev_priv->wm.spr_latency[1] && dev_priv->wm.cur_latency[1]) ||
|
|
(!IS_GEN5(dev_priv) && dev_priv->wm.pri_latency[0] &&
|
|
dev_priv->wm.spr_latency[0] && dev_priv->wm.cur_latency[0])) {
|
|
dev_priv->display.compute_pipe_wm = ilk_compute_pipe_wm;
|
|
dev_priv->display.compute_intermediate_wm =
|
|
ilk_compute_intermediate_wm;
|
|
dev_priv->display.initial_watermarks =
|
|
ilk_initial_watermarks;
|
|
dev_priv->display.optimize_watermarks =
|
|
ilk_optimize_watermarks;
|
|
} else {
|
|
DRM_DEBUG_KMS("Failed to read display plane latency. "
|
|
"Disable CxSR\n");
|
|
}
|
|
} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
vlv_setup_wm_latency(dev_priv);
|
|
dev_priv->display.compute_pipe_wm = vlv_compute_pipe_wm;
|
|
dev_priv->display.compute_intermediate_wm = vlv_compute_intermediate_wm;
|
|
dev_priv->display.initial_watermarks = vlv_initial_watermarks;
|
|
dev_priv->display.optimize_watermarks = vlv_optimize_watermarks;
|
|
dev_priv->display.atomic_update_watermarks = vlv_atomic_update_fifo;
|
|
} else if (IS_G4X(dev_priv)) {
|
|
g4x_setup_wm_latency(dev_priv);
|
|
dev_priv->display.compute_pipe_wm = g4x_compute_pipe_wm;
|
|
dev_priv->display.compute_intermediate_wm = g4x_compute_intermediate_wm;
|
|
dev_priv->display.initial_watermarks = g4x_initial_watermarks;
|
|
dev_priv->display.optimize_watermarks = g4x_optimize_watermarks;
|
|
} else if (IS_PINEVIEW(dev_priv)) {
|
|
if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev_priv),
|
|
dev_priv->is_ddr3,
|
|
dev_priv->fsb_freq,
|
|
dev_priv->mem_freq)) {
|
|
DRM_INFO("failed to find known CxSR latency "
|
|
"(found ddr%s fsb freq %d, mem freq %d), "
|
|
"disabling CxSR\n",
|
|
(dev_priv->is_ddr3 == 1) ? "3" : "2",
|
|
dev_priv->fsb_freq, dev_priv->mem_freq);
|
|
/* Disable CxSR and never update its watermark again */
|
|
intel_set_memory_cxsr(dev_priv, false);
|
|
dev_priv->display.update_wm = NULL;
|
|
} else
|
|
dev_priv->display.update_wm = pineview_update_wm;
|
|
} else if (IS_GEN4(dev_priv)) {
|
|
dev_priv->display.update_wm = i965_update_wm;
|
|
} else if (IS_GEN3(dev_priv)) {
|
|
dev_priv->display.update_wm = i9xx_update_wm;
|
|
dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
|
|
} else if (IS_GEN2(dev_priv)) {
|
|
if (INTEL_INFO(dev_priv)->num_pipes == 1) {
|
|
dev_priv->display.update_wm = i845_update_wm;
|
|
dev_priv->display.get_fifo_size = i845_get_fifo_size;
|
|
} else {
|
|
dev_priv->display.update_wm = i9xx_update_wm;
|
|
dev_priv->display.get_fifo_size = i830_get_fifo_size;
|
|
}
|
|
} else {
|
|
DRM_ERROR("unexpected fall-through in intel_init_pm\n");
|
|
}
|
|
}
|
|
|
|
static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t flags =
|
|
I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
|
|
|
|
switch (flags) {
|
|
case GEN6_PCODE_SUCCESS:
|
|
return 0;
|
|
case GEN6_PCODE_UNIMPLEMENTED_CMD:
|
|
return -ENODEV;
|
|
case GEN6_PCODE_ILLEGAL_CMD:
|
|
return -ENXIO;
|
|
case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
|
|
case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
|
|
return -EOVERFLOW;
|
|
case GEN6_PCODE_TIMEOUT:
|
|
return -ETIMEDOUT;
|
|
default:
|
|
MISSING_CASE(flags);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t flags =
|
|
I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
|
|
|
|
switch (flags) {
|
|
case GEN6_PCODE_SUCCESS:
|
|
return 0;
|
|
case GEN6_PCODE_ILLEGAL_CMD:
|
|
return -ENXIO;
|
|
case GEN7_PCODE_TIMEOUT:
|
|
return -ETIMEDOUT;
|
|
case GEN7_PCODE_ILLEGAL_DATA:
|
|
return -EINVAL;
|
|
case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
|
|
return -EOVERFLOW;
|
|
default:
|
|
MISSING_CASE(flags);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
|
|
{
|
|
int status;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->pcu_lock));
|
|
|
|
/* GEN6_PCODE_* are outside of the forcewake domain, we can
|
|
* use te fw I915_READ variants to reduce the amount of work
|
|
* required when reading/writing.
|
|
*/
|
|
|
|
if (I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) {
|
|
DRM_DEBUG_DRIVER("warning: pcode (read from mbox %x) mailbox access failed for %ps\n",
|
|
mbox, __builtin_return_address(0));
|
|
return -EAGAIN;
|
|
}
|
|
|
|
I915_WRITE_FW(GEN6_PCODE_DATA, *val);
|
|
I915_WRITE_FW(GEN6_PCODE_DATA1, 0);
|
|
I915_WRITE_FW(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
|
|
|
|
if (__intel_wait_for_register_fw(dev_priv,
|
|
GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
|
|
500, 0, NULL)) {
|
|
DRM_ERROR("timeout waiting for pcode read (from mbox %x) to finish for %ps\n",
|
|
mbox, __builtin_return_address(0));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
*val = I915_READ_FW(GEN6_PCODE_DATA);
|
|
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
|
|
|
|
if (INTEL_GEN(dev_priv) > 6)
|
|
status = gen7_check_mailbox_status(dev_priv);
|
|
else
|
|
status = gen6_check_mailbox_status(dev_priv);
|
|
|
|
if (status) {
|
|
DRM_DEBUG_DRIVER("warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
|
|
mbox, __builtin_return_address(0), status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
|
|
u32 mbox, u32 val,
|
|
int fast_timeout_us, int slow_timeout_ms)
|
|
{
|
|
int status;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->pcu_lock));
|
|
|
|
/* GEN6_PCODE_* are outside of the forcewake domain, we can
|
|
* use te fw I915_READ variants to reduce the amount of work
|
|
* required when reading/writing.
|
|
*/
|
|
|
|
if (I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) {
|
|
DRM_DEBUG_DRIVER("warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps\n",
|
|
val, mbox, __builtin_return_address(0));
|
|
return -EAGAIN;
|
|
}
|
|
|
|
I915_WRITE_FW(GEN6_PCODE_DATA, val);
|
|
I915_WRITE_FW(GEN6_PCODE_DATA1, 0);
|
|
I915_WRITE_FW(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
|
|
|
|
if (__intel_wait_for_register_fw(dev_priv,
|
|
GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
|
|
fast_timeout_us, slow_timeout_ms,
|
|
NULL)) {
|
|
DRM_ERROR("timeout waiting for pcode write of 0x%08x to mbox %x to finish for %ps\n",
|
|
val, mbox, __builtin_return_address(0));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
|
|
|
|
if (INTEL_GEN(dev_priv) > 6)
|
|
status = gen7_check_mailbox_status(dev_priv);
|
|
else
|
|
status = gen6_check_mailbox_status(dev_priv);
|
|
|
|
if (status) {
|
|
DRM_DEBUG_DRIVER("warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
|
|
val, mbox, __builtin_return_address(0), status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool skl_pcode_try_request(struct drm_i915_private *dev_priv, u32 mbox,
|
|
u32 request, u32 reply_mask, u32 reply,
|
|
u32 *status)
|
|
{
|
|
u32 val = request;
|
|
|
|
*status = sandybridge_pcode_read(dev_priv, mbox, &val);
|
|
|
|
return *status || ((val & reply_mask) == reply);
|
|
}
|
|
|
|
/**
|
|
* skl_pcode_request - send PCODE request until acknowledgment
|
|
* @dev_priv: device private
|
|
* @mbox: PCODE mailbox ID the request is targeted for
|
|
* @request: request ID
|
|
* @reply_mask: mask used to check for request acknowledgment
|
|
* @reply: value used to check for request acknowledgment
|
|
* @timeout_base_ms: timeout for polling with preemption enabled
|
|
*
|
|
* Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
|
|
* reports an error or an overall timeout of @timeout_base_ms+50 ms expires.
|
|
* The request is acknowledged once the PCODE reply dword equals @reply after
|
|
* applying @reply_mask. Polling is first attempted with preemption enabled
|
|
* for @timeout_base_ms and if this times out for another 50 ms with
|
|
* preemption disabled.
|
|
*
|
|
* Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
|
|
* other error as reported by PCODE.
|
|
*/
|
|
int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
|
|
u32 reply_mask, u32 reply, int timeout_base_ms)
|
|
{
|
|
u32 status;
|
|
int ret;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->pcu_lock));
|
|
|
|
#define COND skl_pcode_try_request(dev_priv, mbox, request, reply_mask, reply, \
|
|
&status)
|
|
|
|
/*
|
|
* Prime the PCODE by doing a request first. Normally it guarantees
|
|
* that a subsequent request, at most @timeout_base_ms later, succeeds.
|
|
* _wait_for() doesn't guarantee when its passed condition is evaluated
|
|
* first, so send the first request explicitly.
|
|
*/
|
|
if (COND) {
|
|
ret = 0;
|
|
goto out;
|
|
}
|
|
ret = _wait_for(COND, timeout_base_ms * 1000, 10, 10);
|
|
if (!ret)
|
|
goto out;
|
|
|
|
/*
|
|
* The above can time out if the number of requests was low (2 in the
|
|
* worst case) _and_ PCODE was busy for some reason even after a
|
|
* (queued) request and @timeout_base_ms delay. As a workaround retry
|
|
* the poll with preemption disabled to maximize the number of
|
|
* requests. Increase the timeout from @timeout_base_ms to 50ms to
|
|
* account for interrupts that could reduce the number of these
|
|
* requests, and for any quirks of the PCODE firmware that delays
|
|
* the request completion.
|
|
*/
|
|
DRM_DEBUG_KMS("PCODE timeout, retrying with preemption disabled\n");
|
|
WARN_ON_ONCE(timeout_base_ms > 3);
|
|
preempt_disable();
|
|
ret = wait_for_atomic(COND, 50);
|
|
preempt_enable();
|
|
|
|
out:
|
|
return ret ? ret : status;
|
|
#undef COND
|
|
}
|
|
|
|
static int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
/*
|
|
* N = val - 0xb7
|
|
* Slow = Fast = GPLL ref * N
|
|
*/
|
|
return DIV_ROUND_CLOSEST(rps->gpll_ref_freq * (val - 0xb7), 1000);
|
|
}
|
|
|
|
static int byt_freq_opcode(struct drm_i915_private *dev_priv, int val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
return DIV_ROUND_CLOSEST(1000 * val, rps->gpll_ref_freq) + 0xb7;
|
|
}
|
|
|
|
static int chv_gpu_freq(struct drm_i915_private *dev_priv, int val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
/*
|
|
* N = val / 2
|
|
* CU (slow) = CU2x (fast) / 2 = GPLL ref * N / 2
|
|
*/
|
|
return DIV_ROUND_CLOSEST(rps->gpll_ref_freq * val, 2 * 2 * 1000);
|
|
}
|
|
|
|
static int chv_freq_opcode(struct drm_i915_private *dev_priv, int val)
|
|
{
|
|
struct intel_rps *rps = &dev_priv->gt_pm.rps;
|
|
|
|
/* CHV needs even values */
|
|
return DIV_ROUND_CLOSEST(2 * 1000 * val, rps->gpll_ref_freq) * 2;
|
|
}
|
|
|
|
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val)
|
|
{
|
|
if (INTEL_GEN(dev_priv) >= 9)
|
|
return DIV_ROUND_CLOSEST(val * GT_FREQUENCY_MULTIPLIER,
|
|
GEN9_FREQ_SCALER);
|
|
else if (IS_CHERRYVIEW(dev_priv))
|
|
return chv_gpu_freq(dev_priv, val);
|
|
else if (IS_VALLEYVIEW(dev_priv))
|
|
return byt_gpu_freq(dev_priv, val);
|
|
else
|
|
return val * GT_FREQUENCY_MULTIPLIER;
|
|
}
|
|
|
|
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val)
|
|
{
|
|
if (INTEL_GEN(dev_priv) >= 9)
|
|
return DIV_ROUND_CLOSEST(val * GEN9_FREQ_SCALER,
|
|
GT_FREQUENCY_MULTIPLIER);
|
|
else if (IS_CHERRYVIEW(dev_priv))
|
|
return chv_freq_opcode(dev_priv, val);
|
|
else if (IS_VALLEYVIEW(dev_priv))
|
|
return byt_freq_opcode(dev_priv, val);
|
|
else
|
|
return DIV_ROUND_CLOSEST(val, GT_FREQUENCY_MULTIPLIER);
|
|
}
|
|
|
|
void intel_pm_setup(struct drm_i915_private *dev_priv)
|
|
{
|
|
mutex_init(&dev_priv->pcu_lock);
|
|
mutex_init(&dev_priv->gt_pm.rps.power.mutex);
|
|
|
|
atomic_set(&dev_priv->gt_pm.rps.num_waiters, 0);
|
|
|
|
dev_priv->runtime_pm.suspended = false;
|
|
atomic_set(&dev_priv->runtime_pm.wakeref_count, 0);
|
|
}
|
|
|
|
static u64 vlv_residency_raw(struct drm_i915_private *dev_priv,
|
|
const i915_reg_t reg)
|
|
{
|
|
u32 lower, upper, tmp;
|
|
int loop = 2;
|
|
|
|
/*
|
|
* The register accessed do not need forcewake. We borrow
|
|
* uncore lock to prevent concurrent access to range reg.
|
|
*/
|
|
lockdep_assert_held(&dev_priv->uncore.lock);
|
|
|
|
/*
|
|
* vlv and chv residency counters are 40 bits in width.
|
|
* With a control bit, we can choose between upper or lower
|
|
* 32bit window into this counter.
|
|
*
|
|
* Although we always use the counter in high-range mode elsewhere,
|
|
* userspace may attempt to read the value before rc6 is initialised,
|
|
* before we have set the default VLV_COUNTER_CONTROL value. So always
|
|
* set the high bit to be safe.
|
|
*/
|
|
I915_WRITE_FW(VLV_COUNTER_CONTROL,
|
|
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH));
|
|
upper = I915_READ_FW(reg);
|
|
do {
|
|
tmp = upper;
|
|
|
|
I915_WRITE_FW(VLV_COUNTER_CONTROL,
|
|
_MASKED_BIT_DISABLE(VLV_COUNT_RANGE_HIGH));
|
|
lower = I915_READ_FW(reg);
|
|
|
|
I915_WRITE_FW(VLV_COUNTER_CONTROL,
|
|
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH));
|
|
upper = I915_READ_FW(reg);
|
|
} while (upper != tmp && --loop);
|
|
|
|
/*
|
|
* Everywhere else we always use VLV_COUNTER_CONTROL with the
|
|
* VLV_COUNT_RANGE_HIGH bit set - so it is safe to leave it set
|
|
* now.
|
|
*/
|
|
|
|
return lower | (u64)upper << 8;
|
|
}
|
|
|
|
u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv,
|
|
const i915_reg_t reg)
|
|
{
|
|
u64 time_hw, prev_hw, overflow_hw;
|
|
unsigned int fw_domains;
|
|
unsigned long flags;
|
|
unsigned int i;
|
|
u32 mul, div;
|
|
|
|
if (!HAS_RC6(dev_priv))
|
|
return 0;
|
|
|
|
/*
|
|
* Store previous hw counter values for counter wrap-around handling.
|
|
*
|
|
* There are only four interesting registers and they live next to each
|
|
* other so we can use the relative address, compared to the smallest
|
|
* one as the index into driver storage.
|
|
*/
|
|
i = (i915_mmio_reg_offset(reg) -
|
|
i915_mmio_reg_offset(GEN6_GT_GFX_RC6_LOCKED)) / sizeof(u32);
|
|
if (WARN_ON_ONCE(i >= ARRAY_SIZE(dev_priv->gt_pm.rc6.cur_residency)))
|
|
return 0;
|
|
|
|
fw_domains = intel_uncore_forcewake_for_reg(dev_priv, reg, FW_REG_READ);
|
|
|
|
spin_lock_irqsave(&dev_priv->uncore.lock, flags);
|
|
intel_uncore_forcewake_get__locked(dev_priv, fw_domains);
|
|
|
|
/* On VLV and CHV, residency time is in CZ units rather than 1.28us */
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
mul = 1000000;
|
|
div = dev_priv->czclk_freq;
|
|
overflow_hw = BIT_ULL(40);
|
|
time_hw = vlv_residency_raw(dev_priv, reg);
|
|
} else {
|
|
/* 833.33ns units on Gen9LP, 1.28us elsewhere. */
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
mul = 10000;
|
|
div = 12;
|
|
} else {
|
|
mul = 1280;
|
|
div = 1;
|
|
}
|
|
|
|
overflow_hw = BIT_ULL(32);
|
|
time_hw = I915_READ_FW(reg);
|
|
}
|
|
|
|
/*
|
|
* Counter wrap handling.
|
|
*
|
|
* But relying on a sufficient frequency of queries otherwise counters
|
|
* can still wrap.
|
|
*/
|
|
prev_hw = dev_priv->gt_pm.rc6.prev_hw_residency[i];
|
|
dev_priv->gt_pm.rc6.prev_hw_residency[i] = time_hw;
|
|
|
|
/* RC6 delta from last sample. */
|
|
if (time_hw >= prev_hw)
|
|
time_hw -= prev_hw;
|
|
else
|
|
time_hw += overflow_hw - prev_hw;
|
|
|
|
/* Add delta to RC6 extended raw driver copy. */
|
|
time_hw += dev_priv->gt_pm.rc6.cur_residency[i];
|
|
dev_priv->gt_pm.rc6.cur_residency[i] = time_hw;
|
|
|
|
intel_uncore_forcewake_put__locked(dev_priv, fw_domains);
|
|
spin_unlock_irqrestore(&dev_priv->uncore.lock, flags);
|
|
|
|
return mul_u64_u32_div(time_hw, mul, div);
|
|
}
|
|
|
|
u32 intel_get_cagf(struct drm_i915_private *dev_priv, u32 rpstat)
|
|
{
|
|
u32 cagf;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 9)
|
|
cagf = (rpstat & GEN9_CAGF_MASK) >> GEN9_CAGF_SHIFT;
|
|
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
cagf = (rpstat & HSW_CAGF_MASK) >> HSW_CAGF_SHIFT;
|
|
else
|
|
cagf = (rpstat & GEN6_CAGF_MASK) >> GEN6_CAGF_SHIFT;
|
|
|
|
return cagf;
|
|
}
|