mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 20:36:39 +07:00
4ec031166f
On all targets that sucker boils down to memcpy_fromio(sbk->data, from, len). The function name is highly misguiding (it _never_ does any checksums), the last argument is just a noise and simply expanding the call to memcpy_fromio() gives shorter and more readable source. For a lot of reasons it has almost no remaining users, so it's better to just outright kill it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
556 lines
17 KiB
C
556 lines
17 KiB
C
/* wd.c: A WD80x3 ethernet driver for linux. */
|
|
/*
|
|
Written 1993-94 by Donald Becker.
|
|
|
|
Copyright 1993 United States Government as represented by the
|
|
Director, National Security Agency.
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License, incorporated herein by reference.
|
|
|
|
The author may be reached as becker@scyld.com, or C/O
|
|
Scyld Computing Corporation
|
|
410 Severn Ave., Suite 210
|
|
Annapolis MD 21403
|
|
|
|
This is a driver for WD8003 and WD8013 "compatible" ethercards.
|
|
|
|
Thanks to Russ Nelson (nelson@crnwyr.com) for loaning me a WD8013.
|
|
|
|
Changelog:
|
|
|
|
Paul Gortmaker : multiple card support for module users, support
|
|
for non-standard memory sizes.
|
|
|
|
|
|
*/
|
|
|
|
static const char version[] =
|
|
"wd.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "8390.h"
|
|
|
|
#define DRV_NAME "wd"
|
|
|
|
/* A zero-terminated list of I/O addresses to be probed. */
|
|
static unsigned int wd_portlist[] __initdata =
|
|
{0x300, 0x280, 0x380, 0x240, 0};
|
|
|
|
static int wd_probe1(struct net_device *dev, int ioaddr);
|
|
|
|
static int wd_open(struct net_device *dev);
|
|
static void wd_reset_8390(struct net_device *dev);
|
|
static void wd_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
|
|
int ring_page);
|
|
static void wd_block_input(struct net_device *dev, int count,
|
|
struct sk_buff *skb, int ring_offset);
|
|
static void wd_block_output(struct net_device *dev, int count,
|
|
const unsigned char *buf, int start_page);
|
|
static int wd_close(struct net_device *dev);
|
|
|
|
|
|
#define WD_START_PG 0x00 /* First page of TX buffer */
|
|
#define WD03_STOP_PG 0x20 /* Last page +1 of RX ring */
|
|
#define WD13_STOP_PG 0x40 /* Last page +1 of RX ring */
|
|
|
|
#define WD_CMDREG 0 /* Offset to ASIC command register. */
|
|
#define WD_RESET 0x80 /* Board reset, in WD_CMDREG. */
|
|
#define WD_MEMENB 0x40 /* Enable the shared memory. */
|
|
#define WD_CMDREG5 5 /* Offset to 16-bit-only ASIC register 5. */
|
|
#define ISA16 0x80 /* Enable 16 bit access from the ISA bus. */
|
|
#define NIC16 0x40 /* Enable 16 bit access from the 8390. */
|
|
#define WD_NIC_OFFSET 16 /* Offset to the 8390 from the base_addr. */
|
|
#define WD_IO_EXTENT 32
|
|
|
|
|
|
/* Probe for the WD8003 and WD8013. These cards have the station
|
|
address PROM at I/O ports <base>+8 to <base>+13, with a checksum
|
|
following. A Soundblaster can have the same checksum as an WDethercard,
|
|
so we have an extra exclusionary check for it.
|
|
|
|
The wd_probe1() routine initializes the card and fills the
|
|
station address field. */
|
|
|
|
static int __init do_wd_probe(struct net_device *dev)
|
|
{
|
|
int i;
|
|
struct resource *r;
|
|
int base_addr = dev->base_addr;
|
|
int irq = dev->irq;
|
|
int mem_start = dev->mem_start;
|
|
int mem_end = dev->mem_end;
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
if (base_addr > 0x1ff) { /* Check a user specified location. */
|
|
r = request_region(base_addr, WD_IO_EXTENT, "wd-probe");
|
|
if ( r == NULL)
|
|
return -EBUSY;
|
|
i = wd_probe1(dev, base_addr);
|
|
if (i != 0)
|
|
release_region(base_addr, WD_IO_EXTENT);
|
|
else
|
|
r->name = dev->name;
|
|
return i;
|
|
}
|
|
else if (base_addr != 0) /* Don't probe at all. */
|
|
return -ENXIO;
|
|
|
|
for (i = 0; wd_portlist[i]; i++) {
|
|
int ioaddr = wd_portlist[i];
|
|
r = request_region(ioaddr, WD_IO_EXTENT, "wd-probe");
|
|
if (r == NULL)
|
|
continue;
|
|
if (wd_probe1(dev, ioaddr) == 0) {
|
|
r->name = dev->name;
|
|
return 0;
|
|
}
|
|
release_region(ioaddr, WD_IO_EXTENT);
|
|
dev->irq = irq;
|
|
dev->mem_start = mem_start;
|
|
dev->mem_end = mem_end;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
#ifndef MODULE
|
|
struct net_device * __init wd_probe(int unit)
|
|
{
|
|
struct net_device *dev = alloc_ei_netdev();
|
|
int err;
|
|
|
|
if (!dev)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
sprintf(dev->name, "eth%d", unit);
|
|
netdev_boot_setup_check(dev);
|
|
|
|
err = do_wd_probe(dev);
|
|
if (err)
|
|
goto out;
|
|
return dev;
|
|
out:
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
#endif
|
|
|
|
static int __init wd_probe1(struct net_device *dev, int ioaddr)
|
|
{
|
|
int i;
|
|
int err;
|
|
int checksum = 0;
|
|
int ancient = 0; /* An old card without config registers. */
|
|
int word16 = 0; /* 0 = 8 bit, 1 = 16 bit */
|
|
const char *model_name;
|
|
static unsigned version_printed;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
checksum += inb(ioaddr + 8 + i);
|
|
if (inb(ioaddr + 8) == 0xff /* Extra check to avoid soundcard. */
|
|
|| inb(ioaddr + 9) == 0xff
|
|
|| (checksum & 0xff) != 0xFF)
|
|
return -ENODEV;
|
|
|
|
/* Check for semi-valid mem_start/end values if supplied. */
|
|
if ((dev->mem_start % 0x2000) || (dev->mem_end % 0x2000)) {
|
|
printk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n");
|
|
dev->mem_start = 0;
|
|
dev->mem_end = 0;
|
|
}
|
|
|
|
if (ei_debug && version_printed++ == 0)
|
|
printk(version);
|
|
|
|
printk("%s: WD80x3 at %#3x,", dev->name, ioaddr);
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));
|
|
|
|
/* The following PureData probe code was contributed by
|
|
Mike Jagdis <jaggy@purplet.demon.co.uk>. Puredata does software
|
|
configuration differently from others so we have to check for them.
|
|
This detects an 8 bit, 16 bit or dumb (Toshiba, jumpered) card.
|
|
*/
|
|
if (inb(ioaddr+0) == 'P' && inb(ioaddr+1) == 'D') {
|
|
unsigned char reg5 = inb(ioaddr+5);
|
|
|
|
switch (inb(ioaddr+2)) {
|
|
case 0x03: word16 = 0; model_name = "PDI8023-8"; break;
|
|
case 0x05: word16 = 0; model_name = "PDUC8023"; break;
|
|
case 0x0a: word16 = 1; model_name = "PDI8023-16"; break;
|
|
/* Either 0x01 (dumb) or they've released a new version. */
|
|
default: word16 = 0; model_name = "PDI8023"; break;
|
|
}
|
|
dev->mem_start = ((reg5 & 0x1c) + 0xc0) << 12;
|
|
dev->irq = (reg5 & 0xe0) == 0xe0 ? 10 : (reg5 >> 5) + 1;
|
|
} else { /* End of PureData probe */
|
|
/* This method of checking for a 16-bit board is borrowed from the
|
|
we.c driver. A simpler method is just to look in ASIC reg. 0x03.
|
|
I'm comparing the two method in alpha test to make certain they
|
|
return the same result. */
|
|
/* Check for the old 8 bit board - it has register 0/8 aliasing.
|
|
Do NOT check i>=6 here -- it hangs the old 8003 boards! */
|
|
for (i = 0; i < 6; i++)
|
|
if (inb(ioaddr+i) != inb(ioaddr+8+i))
|
|
break;
|
|
if (i >= 6) {
|
|
ancient = 1;
|
|
model_name = "WD8003-old";
|
|
word16 = 0;
|
|
} else {
|
|
int tmp = inb(ioaddr+1); /* fiddle with 16bit bit */
|
|
outb( tmp ^ 0x01, ioaddr+1 ); /* attempt to clear 16bit bit */
|
|
if (((inb( ioaddr+1) & 0x01) == 0x01) /* A 16 bit card */
|
|
&& (tmp & 0x01) == 0x01 ) { /* In a 16 slot. */
|
|
int asic_reg5 = inb(ioaddr+WD_CMDREG5);
|
|
/* Magic to set ASIC to word-wide mode. */
|
|
outb( NIC16 | (asic_reg5&0x1f), ioaddr+WD_CMDREG5);
|
|
outb(tmp, ioaddr+1);
|
|
model_name = "WD8013";
|
|
word16 = 1; /* We have a 16bit board here! */
|
|
} else {
|
|
model_name = "WD8003";
|
|
word16 = 0;
|
|
}
|
|
outb(tmp, ioaddr+1); /* Restore original reg1 value. */
|
|
}
|
|
#ifndef final_version
|
|
if ( !ancient && (inb(ioaddr+1) & 0x01) != (word16 & 0x01))
|
|
printk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).",
|
|
word16 ? 16 : 8, (inb(ioaddr+1) & 0x01) ? 16 : 8);
|
|
#endif
|
|
}
|
|
|
|
#if defined(WD_SHMEM) && WD_SHMEM > 0x80000
|
|
/* Allow a compile-time override. */
|
|
dev->mem_start = WD_SHMEM;
|
|
#else
|
|
if (dev->mem_start == 0) {
|
|
/* Sanity and old 8003 check */
|
|
int reg0 = inb(ioaddr);
|
|
if (reg0 == 0xff || reg0 == 0) {
|
|
/* Future plan: this could check a few likely locations first. */
|
|
dev->mem_start = 0xd0000;
|
|
printk(" assigning address %#lx", dev->mem_start);
|
|
} else {
|
|
int high_addr_bits = inb(ioaddr+WD_CMDREG5) & 0x1f;
|
|
/* Some boards don't have the register 5 -- it returns 0xff. */
|
|
if (high_addr_bits == 0x1f || word16 == 0)
|
|
high_addr_bits = 0x01;
|
|
dev->mem_start = ((reg0&0x3f) << 13) + (high_addr_bits << 19);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* The 8390 isn't at the base address -- the ASIC regs are there! */
|
|
dev->base_addr = ioaddr+WD_NIC_OFFSET;
|
|
|
|
if (dev->irq < 2) {
|
|
int irqmap[] = {9,3,5,7,10,11,15,4};
|
|
int reg1 = inb(ioaddr+1);
|
|
int reg4 = inb(ioaddr+4);
|
|
if (ancient || reg1 == 0xff) { /* Ack!! No way to read the IRQ! */
|
|
short nic_addr = ioaddr+WD_NIC_OFFSET;
|
|
unsigned long irq_mask;
|
|
|
|
/* We have an old-style ethercard that doesn't report its IRQ
|
|
line. Do autoirq to find the IRQ line. Note that this IS NOT
|
|
a reliable way to trigger an interrupt. */
|
|
outb_p(E8390_NODMA + E8390_STOP, nic_addr);
|
|
outb(0x00, nic_addr+EN0_IMR); /* Disable all intrs. */
|
|
|
|
irq_mask = probe_irq_on();
|
|
outb_p(0xff, nic_addr + EN0_IMR); /* Enable all interrupts. */
|
|
outb_p(0x00, nic_addr + EN0_RCNTLO);
|
|
outb_p(0x00, nic_addr + EN0_RCNTHI);
|
|
outb(E8390_RREAD+E8390_START, nic_addr); /* Trigger it... */
|
|
mdelay(20);
|
|
dev->irq = probe_irq_off(irq_mask);
|
|
|
|
outb_p(0x00, nic_addr+EN0_IMR); /* Mask all intrs. again. */
|
|
|
|
if (ei_debug > 2)
|
|
printk(" autoirq is %d", dev->irq);
|
|
if (dev->irq < 2)
|
|
dev->irq = word16 ? 10 : 5;
|
|
} else
|
|
dev->irq = irqmap[((reg4 >> 5) & 0x03) + (reg1 & 0x04)];
|
|
} else if (dev->irq == 2) /* Fixup bogosity: IRQ2 is really IRQ9 */
|
|
dev->irq = 9;
|
|
|
|
/* Snarf the interrupt now. There's no point in waiting since we cannot
|
|
share and the board will usually be enabled. */
|
|
i = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
|
|
if (i) {
|
|
printk (" unable to get IRQ %d.\n", dev->irq);
|
|
return i;
|
|
}
|
|
|
|
/* OK, were are certain this is going to work. Setup the device. */
|
|
ei_status.name = model_name;
|
|
ei_status.word16 = word16;
|
|
ei_status.tx_start_page = WD_START_PG;
|
|
ei_status.rx_start_page = WD_START_PG + TX_PAGES;
|
|
|
|
/* Don't map in the shared memory until the board is actually opened. */
|
|
|
|
/* Some cards (eg WD8003EBT) can be jumpered for more (32k!) memory. */
|
|
if (dev->mem_end != 0) {
|
|
ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
|
|
ei_status.priv = dev->mem_end - dev->mem_start;
|
|
} else {
|
|
ei_status.stop_page = word16 ? WD13_STOP_PG : WD03_STOP_PG;
|
|
dev->mem_end = dev->mem_start + (ei_status.stop_page - WD_START_PG)*256;
|
|
ei_status.priv = (ei_status.stop_page - WD_START_PG)*256;
|
|
}
|
|
|
|
ei_status.mem = ioremap(dev->mem_start, ei_status.priv);
|
|
if (!ei_status.mem) {
|
|
free_irq(dev->irq, dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
printk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n",
|
|
model_name, dev->irq, dev->mem_start, dev->mem_end-1);
|
|
|
|
ei_status.reset_8390 = &wd_reset_8390;
|
|
ei_status.block_input = &wd_block_input;
|
|
ei_status.block_output = &wd_block_output;
|
|
ei_status.get_8390_hdr = &wd_get_8390_hdr;
|
|
dev->open = &wd_open;
|
|
dev->stop = &wd_close;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = ei_poll;
|
|
#endif
|
|
NS8390_init(dev, 0);
|
|
|
|
#if 1
|
|
/* Enable interrupt generation on softconfig cards -- M.U */
|
|
/* .. but possibly potentially unsafe - Donald */
|
|
if (inb(ioaddr+14) & 0x20)
|
|
outb(inb(ioaddr+4)|0x80, ioaddr+4);
|
|
#endif
|
|
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
free_irq(dev->irq, dev);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
wd_open(struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
|
|
|
|
/* Map in the shared memory. Always set register 0 last to remain
|
|
compatible with very old boards. */
|
|
ei_status.reg0 = ((dev->mem_start>>13) & 0x3f) | WD_MEMENB;
|
|
ei_status.reg5 = ((dev->mem_start>>19) & 0x1f) | NIC16;
|
|
|
|
if (ei_status.word16)
|
|
outb(ei_status.reg5, ioaddr+WD_CMDREG5);
|
|
outb(ei_status.reg0, ioaddr); /* WD_CMDREG */
|
|
|
|
ei_open(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
wd_reset_8390(struct net_device *dev)
|
|
{
|
|
int wd_cmd_port = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
|
|
|
|
outb(WD_RESET, wd_cmd_port);
|
|
if (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies);
|
|
ei_status.txing = 0;
|
|
|
|
/* Set up the ASIC registers, just in case something changed them. */
|
|
outb((((dev->mem_start>>13) & 0x3f)|WD_MEMENB), wd_cmd_port);
|
|
if (ei_status.word16)
|
|
outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5);
|
|
|
|
if (ei_debug > 1) printk("reset done\n");
|
|
return;
|
|
}
|
|
|
|
/* Grab the 8390 specific header. Similar to the block_input routine, but
|
|
we don't need to be concerned with ring wrap as the header will be at
|
|
the start of a page, so we optimize accordingly. */
|
|
|
|
static void
|
|
wd_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
|
|
{
|
|
|
|
int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
|
|
void __iomem *hdr_start = ei_status.mem + ((ring_page - WD_START_PG)<<8);
|
|
|
|
/* We'll always get a 4 byte header read followed by a packet read, so
|
|
we enable 16 bit mode before the header, and disable after the body. */
|
|
if (ei_status.word16)
|
|
outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5);
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
/* Officially this is what we are doing, but the readl() is faster */
|
|
/* unfortunately it isn't endian aware of the struct */
|
|
memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
|
|
hdr->count = le16_to_cpu(hdr->count);
|
|
#else
|
|
((unsigned int*)hdr)[0] = readl(hdr_start);
|
|
#endif
|
|
}
|
|
|
|
/* Block input and output are easy on shared memory ethercards, and trivial
|
|
on the Western digital card where there is no choice of how to do it.
|
|
The only complications are that the ring buffer wraps, and need to map
|
|
switch between 8- and 16-bit modes. */
|
|
|
|
static void
|
|
wd_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
|
|
{
|
|
int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
|
|
unsigned long offset = ring_offset - (WD_START_PG<<8);
|
|
void __iomem *xfer_start = ei_status.mem + offset;
|
|
|
|
if (offset + count > ei_status.priv) {
|
|
/* We must wrap the input move. */
|
|
int semi_count = ei_status.priv - offset;
|
|
memcpy_fromio(skb->data, xfer_start, semi_count);
|
|
count -= semi_count;
|
|
memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
|
|
} else {
|
|
/* Packet is in one chunk -- we can copy + cksum. */
|
|
memcpy_fromio(skb->data, xfer_start, count);
|
|
}
|
|
|
|
/* Turn off 16 bit access so that reboot works. ISA brain-damage */
|
|
if (ei_status.word16)
|
|
outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5);
|
|
}
|
|
|
|
static void
|
|
wd_block_output(struct net_device *dev, int count, const unsigned char *buf,
|
|
int start_page)
|
|
{
|
|
int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
|
|
void __iomem *shmem = ei_status.mem + ((start_page - WD_START_PG)<<8);
|
|
|
|
|
|
if (ei_status.word16) {
|
|
/* Turn on and off 16 bit access so that reboot works. */
|
|
outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5);
|
|
memcpy_toio(shmem, buf, count);
|
|
outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5);
|
|
} else
|
|
memcpy_toio(shmem, buf, count);
|
|
}
|
|
|
|
|
|
static int
|
|
wd_close(struct net_device *dev)
|
|
{
|
|
int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
|
|
|
|
if (ei_debug > 1)
|
|
printk("%s: Shutting down ethercard.\n", dev->name);
|
|
ei_close(dev);
|
|
|
|
/* Change from 16-bit to 8-bit shared memory so reboot works. */
|
|
if (ei_status.word16)
|
|
outb(ei_status.reg5, wd_cmdreg + WD_CMDREG5 );
|
|
|
|
/* And disable the shared memory. */
|
|
outb(ei_status.reg0 & ~WD_MEMENB, wd_cmdreg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#ifdef MODULE
|
|
#define MAX_WD_CARDS 4 /* Max number of wd cards per module */
|
|
static struct net_device *dev_wd[MAX_WD_CARDS];
|
|
static int io[MAX_WD_CARDS];
|
|
static int irq[MAX_WD_CARDS];
|
|
static int mem[MAX_WD_CARDS];
|
|
static int mem_end[MAX_WD_CARDS]; /* for non std. mem size */
|
|
|
|
module_param_array(io, int, NULL, 0);
|
|
module_param_array(irq, int, NULL, 0);
|
|
module_param_array(mem, int, NULL, 0);
|
|
module_param_array(mem_end, int, NULL, 0);
|
|
MODULE_PARM_DESC(io, "I/O base address(es)");
|
|
MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)");
|
|
MODULE_PARM_DESC(mem, "memory base address(es)(ignored for PureData boards)");
|
|
MODULE_PARM_DESC(mem_end, "memory end address(es)");
|
|
MODULE_DESCRIPTION("ISA Western Digital wd8003/wd8013 ; SMC Elite, Elite16 ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* This is set up so that only a single autoprobe takes place per call.
|
|
ISA device autoprobes on a running machine are not recommended. */
|
|
|
|
int __init init_module(void)
|
|
{
|
|
struct net_device *dev;
|
|
int this_dev, found = 0;
|
|
|
|
for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) {
|
|
if (io[this_dev] == 0) {
|
|
if (this_dev != 0) break; /* only autoprobe 1st one */
|
|
printk(KERN_NOTICE "wd.c: Presently autoprobing (not recommended) for a single card.\n");
|
|
}
|
|
dev = alloc_ei_netdev();
|
|
if (!dev)
|
|
break;
|
|
dev->irq = irq[this_dev];
|
|
dev->base_addr = io[this_dev];
|
|
dev->mem_start = mem[this_dev];
|
|
dev->mem_end = mem_end[this_dev];
|
|
if (do_wd_probe(dev) == 0) {
|
|
dev_wd[found++] = dev;
|
|
continue;
|
|
}
|
|
free_netdev(dev);
|
|
printk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]);
|
|
break;
|
|
}
|
|
if (found)
|
|
return 0;
|
|
return -ENXIO;
|
|
}
|
|
|
|
static void cleanup_card(struct net_device *dev)
|
|
{
|
|
free_irq(dev->irq, dev);
|
|
release_region(dev->base_addr - WD_NIC_OFFSET, WD_IO_EXTENT);
|
|
iounmap(ei_status.mem);
|
|
}
|
|
|
|
void __exit
|
|
cleanup_module(void)
|
|
{
|
|
int this_dev;
|
|
|
|
for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) {
|
|
struct net_device *dev = dev_wd[this_dev];
|
|
if (dev) {
|
|
unregister_netdev(dev);
|
|
cleanup_card(dev);
|
|
free_netdev(dev);
|
|
}
|
|
}
|
|
}
|
|
#endif /* MODULE */
|