John Fastabend b1ac1ef71b ixgbe: fdb: only allow NUD_PERM fdb entries ... There was a bitwise operation error in the fdb_add block that was only allowing FDB types that were not permanent. This was the opposite of the intent because the hardware never ages out address these are the _only_ type of addrs that should be allowed. This was missed because until recently iproute2 did not set any bit for this by default. And our test code to manage FDB entries on embedded devices similarly did not set these bits. I am going to chalk this up as a bug and fix it now. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2012-11-22 02:00:42 -08:00
..
ixgbe_82598.c	ixgbe: Update link flow control to correctly handle multiple packet buffer DCB	2012-05-04 03:25:24 -07:00
ixgbe_82599.c	ixgbe: Add support for pipeline reset	2012-10-29 22:14:48 -07:00
ixgbe_common.c	ixgbe: ethtool correctly identify autoneg setting	2012-11-22 01:39:43 -08:00
ixgbe_common.h	ixgbe: ethtool correctly identify autoneg setting	2012-11-22 01:39:43 -08:00
ixgbe_dcb_82598.c	ixgbe: Clean up priority based flow control	2012-05-09 22:15:40 -07:00
ixgbe_dcb_82598.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_dcb_82599.c	ixgbe: Clean up priority based flow control	2012-05-09 22:15:40 -07:00
ixgbe_dcb_82599.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_dcb_nl.c	ixgbe: Populate the prio_tc_map in ixgbe_setup_tc	2012-07-14 14:29:19 -07:00
ixgbe_dcb.c	ixgbe: Use num_tcs.pg_tcs as upper limit for TC when checking based on UP	2012-07-21 16:05:28 -07:00
ixgbe_dcb.h	ixgbe: Populate the prio_tc_map in ixgbe_setup_tc	2012-07-14 14:29:19 -07:00
ixgbe_debugfs.c	ixgbe: convert to use simple_open()	2012-11-22 01:39:31 -08:00
ixgbe_ethtool.c	ixgbe: ethtool correctly identify autoneg setting	2012-11-22 01:39:43 -08:00
ixgbe_fcoe.c	ixgbe: Enable jumbo frames support w/ SR-IOV	2012-10-19 04:04:14 -07:00
ixgbe_fcoe.h	ixgbe: Make FCoE allocation and configuration closer to how rings work	2012-07-19 18:18:49 -07:00
ixgbe_lib.c	ixgbe: fix default setting of TXDCTL.WTHRESH	2012-11-01 02:00:10 -07:00
ixgbe_main.c	ixgbe: fdb: only allow NUD_PERM fdb entries	2012-11-22 02:00:42 -08:00
ixgbe_mbx.c	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_mbx.h	ixgbe: Add support for GET_QUEUES message to get DCB configuration	2012-10-22 21:14:54 -07:00
ixgbe_phy.c	ixgbe: add support for 1G SX modules	2012-06-20 01:37:04 -07:00
ixgbe_phy.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_ptp.c	ixgbe: remove needless queuing for L4 ptp packets	2012-11-22 01:39:37 -08:00
ixgbe_sriov.c	Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next	2012-10-31 14:26:44 -04:00
ixgbe_sriov.h	ixgbe: Change how we check for pre-existing and assigned VFs	2012-07-21 16:02:56 -07:00
ixgbe_sysfs.c	drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functions	2012-07-10 23:13:46 -07:00
ixgbe_type.h	ixgbe: add WOL support for new subdevice id	2012-10-22 21:15:57 -07:00
ixgbe_x540.c	ixgbe: Correctly set SAN MAC RAR pool to default pool of PF	2012-07-19 18:19:37 -07:00
ixgbe.h	ptp: Enable clock drivers along with associated net/PHY drivers	2012-11-01 11:35:18 -04:00
Makefile	ptp: Enable clock drivers along with associated net/PHY drivers	2012-11-01 11:35:18 -04:00