linux_dsm_epyc7002/include/linux/platform_data
Linus Torvalds b0f85fa11a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...
2015-11-04 09:41:05 -08:00
..
ad5449.h iio:dac: Add support for the ad5449 2012-10-19 18:46:51 +01:00
ad5755.h
ad7266.h
ad7291.h staging:iio:ad7291: Move out of staging 2014-07-08 21:17:30 +01:00
ad7298.h staging:iio: Move the ad7298 driver out of staging 2012-11-19 22:22:15 +00:00
ad7303.h iio:dac: Add support for the AD7303 2013-06-11 20:25:58 +01:00
ad7791.h
ad7793.h staging:iio: Move ad7793 driver out of staging 2012-11-30 12:57:08 +00:00
ad7887.h staging:iio: Move the ad7887 driver out of staging 2012-11-05 20:39:54 +00:00
adau17x1.h ASoC: Add ADAU1381/ADAU1781 audio CODEC support 2014-05-27 20:54:51 +01:00
adau1977.h ASoC: Add ADAU1977 CODEC driver 2014-02-19 13:36:15 +09:00
ads7828.h hwmon: (ads7828) driver cleanup 2012-12-05 10:55:54 -08:00
arm-ux500-pm.h ARM: ux500: move PM-related PRCMU functions to machine 2013-04-08 13:57:53 +02:00
asoc-imx-ssi.h ARM: imx: remove header file mach/irqs.h 2012-10-15 10:05:43 +08:00
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c24xx_simtec.h ASoC: s3c24xx: Remove invalid file reference 2014-02-25 21:29:31 +09:00
asoc-s3c.h ASoC: Samsung: Add quirk for internal DMA 2014-11-07 10:38:17 +00:00
asoc-ti-mcbsp.h ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h 2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion 2014-01-07 15:36:09 +00:00
at24.h misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
at91_adc.h iio: adc: at91_adc: Add support for touchscreens without TSMR 2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h ata: pata_samsung_cf: removes s5pc100 related ata codes 2014-06-30 10:48:08 -04:00
atmel_mxt_ts.h Input: atmel_mxt_ts - use deep sleep mode when stopped 2015-08-04 17:03:52 -07:00
atmel.h can: at91: remove at91_can_data 2015-10-13 17:42:35 +02:00
bcmgenet.h net: bcmgenet: enable driver to work without a device tree 2014-12-08 20:26:59 -05:00
bd6107.h backlight: Add ROHM BD6107 backlight driver 2013-07-16 13:01:19 +09:00
bfin_rotary.h Input: bfin_rotary - move pin lists into into platform data 2015-02-15 16:06:27 -08:00
brcmfmac-sdio.h brcmfmac: abstract tx packet processing functions 2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h staging/bluetooth: Add hci_h4p driver 2014-02-07 10:13:53 -08:00
camera-mx2.h
camera-mx3.h [media] V4L2: mx3_camera: add support for asynchronous subdevice registration 2013-08-18 09:06:37 -03:00
camera-pxa.h
camera-rcar.h [media] V4L2: soc_camera: Renesas R-Car VIN driver 2013-08-18 09:01:10 -03:00
clk-integrator.h ARM: integrator: switch to fetch clocks from device tree 2014-02-13 11:20:42 +01:00
clk-lpss.h ACPI / LPSS: register clock device for Lynxpoint DMA properly 2013-05-14 10:23:58 +05:30
clk-realview.h
clk-u300.h
clk-ux500.h clk/ARM: move Ux500 PRCC bases to the device tree 2015-08-24 16:49:14 -07:00
coda.h media: coda: use genalloc API 2013-04-29 18:28:13 -07:00
cpuidle-exynos.h cpuidle: exynos: add coupled cpuidle support for exynos4210 2015-01-30 08:39:15 +09:00
crypto-atmel.h ARM: AT91SAM9G45: same platform data structure for all crypto peripherals 2013-03-10 16:46:41 +08:00
crypto-ux500.h ARM: plat-nomadik: move DMA40 header to <linux/platform_data> 2012-11-05 09:55:32 +01:00
cyttsp4.h Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices 2013-06-30 21:24:21 -07:00
davinci_asp.h ASoC: davinci-mcasp: Rename platform data struct 2014-02-03 18:26:59 +00:00
db8500_thermal.h Thermal: Add ST-Ericsson DB8500 thermal driver. 2012-11-15 20:50:34 +08:00
dma-atmel.h dmaengine: at_hdmac: extend hardware handshaking interface identification 2013-07-05 11:40:29 +05:30
dma-coh901318.h dma: coh901318: create a proper platform data file 2013-01-07 17:35:57 +01:00
dma-dw.h dmaengine: dw: define DW_DMA_MAX_NR_MASTERS 2015-02-04 22:39:44 -08:00
dma-ep93xx.h
dma-hsu.h dmaengine: append hsu DMA driver 2015-03-07 03:23:02 +01:00
dma-imx-sdma.h dmaengine: imx-sdma: Add support for version 3 firmware 2015-03-18 13:53:33 +05:30
dma-imx.h dmaengine: imx-sdma: Add a new DMATYPE for SAI 2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h dma: mmp_tdma: Fix build for ARM64 2015-02-03 17:47:35 -08:00
dma-mv_xor.h dma: mv_xor: Cleanup in dma-mv_xor.h header 2014-01-13 13:30:31 +05:30
dma-rcar-hpbdma.h dma: add driver for R-Car HPB-DMAC 2013-09-02 17:35:55 +05:30
dma-s3c24xx.h ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 2013-10-21 05:32:48 +09:00
dma-ste-dma40.h dmaengine: ste_dma40: Allow memcpy channels to be configured from DT 2013-06-04 11:12:11 +02:00
dmtimer-omap.h ARM: OMAP: Add platform data header for DMTIMERs 2012-11-16 10:35:08 -06:00
drv260x-pdata.h Input: drv260x - add TI drv260x haptics driver 2014-08-19 22:19:28 -07:00
dwc3-omap.h usb: dwc3: omap: remove platform data associated with dwc3-omap 2013-03-18 11:16:38 +02:00
edma.h ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue 2014-07-28 17:03:13 +05:30
efm32-spi.h spi: new controller driver for efm32 SoCs 2013-08-09 17:32:57 +01:00
efm32-uart.h
ehci-sh.h
elm.h nand: omap2: Remove horrible ifdefs to fix module probe 2014-09-22 11:37:51 -07:00
emif_plat.h memory: emif: Handle devices which are not rated for >85C 2013-03-25 13:18:12 -07:00
eth-netx.h net: Cleanup in eth-netx.h 2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h Add support for GMT G762/G763 PWM fan controllers 2013-06-27 10:31:42 -07:00
gpio_backlight.h backlight: Add GPIO-based backlight driver 2013-07-16 13:01:05 +09:00
gpio-ath79.h MIPS: ath79: Add OF support to the GPIO driver 2015-06-21 21:54:09 +02:00
gpio-davinci.h gpio: remove obsolete tnetv107x driver 2014-03-05 10:44:44 +08:00
gpio-dwapb.h GPIO: gpio-dwapb: Enable platform driver binding to MFD driver 2014-09-23 17:51:37 +02:00
gpio-lpc32xx.h ARM: lpc32xx: move custom GPIO header 2013-12-03 11:26:06 +01:00
gpio-omap.h gpio: omap: Allow building as a loadable module 2015-05-06 15:23:03 +02:00
gpio-rcar.h gpio-rcar: Add RCAR_GP_PIN macro 2013-06-04 21:03:56 +09:00
gpio-ts5500.h gpio: add TS-5500 DIO blocks support 2012-12-10 11:23:25 +01:00
hsmmc-omap.h ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin 2015-03-27 12:19:37 +01:00
hwmon-s3c.h hwmon: (s3c) Trivial cleanup in hwmon-s3c.h 2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h i2c: i2c-cbus-gpio: introduce driver 2012-11-19 09:57:16 +01:00
i2c-davinci.h i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery 2015-04-10 17:57:28 +02:00
i2c-designware.h i2c: designware: add support of platform data to set I2C mode 2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-mux-reg.h i2c: mux: Add register-based mux i2c-mux-reg 2015-08-24 14:05:18 +02:00
i2c-nuc900.h
i2c-s3c2410.h i2c: s3c2410: Trivial cleanup in header file 2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h watchdog: add Intel MID watchdog driver support 2014-06-10 21:48:16 +02:00
invensense_mpu6050.h Invensense MPU6050 Device Driver. 2013-02-10 17:42:43 +00:00
iommu-omap.h iommu/omap: Remove platform data da_start and da_end fields 2014-07-29 12:39:56 +02:00
irda-pxaficp.h
irda-sa11x0.h arm: sa1100: move irda header to linux/platform_data 2014-12-30 18:44:07 -05:00
irq-renesas-intc-irqpin.h irqchip: intc-irqpin: GPL header for platform data 2013-03-18 21:26:06 +09:00
isl9305.h regulator: isl9305: Add Intersil ISL9305/H driver 2014-09-06 12:43:05 +01:00
itco_wdt.h mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform data 2015-08-11 15:03:21 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h Input: update email-id of Rajeev Kumar 2015-05-22 10:59:55 -07:00
keypad-ep93xx.h Input: keypad-ep93xx - cleanup header file 2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h Input: keypad-omap - cleanup header file 2013-12-27 17:20:22 -08:00
keypad-pxa27x.h Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h leds: netxbig: add device tree binding 2015-11-03 08:59:25 +01:00
leds-kirkwood-ns2.h leds: leds-ns2: move LED modes mapping outside of the driver 2015-08-28 14:06:06 +02:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h leds: lp55xx: handle enable pin in driver 2013-10-25 10:13:25 -07:00
leds-omap.h ARM: OMAP: Move plat/led.h to include/linux/platform_data 2012-10-17 12:03:18 -07:00
leds-pca963x.h leds-pca9633: Rename to leds-pca963x 2013-08-26 17:22:14 -07:00
leds-s3c24xx.h leds: leds-s3c24xx: Trivial cleanup in header file 2014-02-27 09:57:11 -08:00
lm3630a_bl.h backlight: lm3630: apply chip revision 2013-11-13 12:09:15 +09:00
lm3639_bl.h
lp855x.h backlight: lp855x: Use private data for regulator control 2015-08-25 08:40:44 +01:00
lp8727.h
lp8755.h regulator: lp8755: new driver for LP8755 2012-12-24 16:32:34 +00:00
lv5207lp.h backlight: Add Sanyo LV5207LP backlight driver 2013-07-16 13:01:10 +09:00
macb.h net/macb: convert to kernel doc 2015-07-27 01:10:29 -07:00
mailbox-omap.h ARM: OMAP2+: add user and fifo info to mailbox platform data 2013-06-11 11:41:30 -05:00
max197.h hwmon: (max197) add include guard 2014-01-14 21:36:53 -08:00
max3421-hcd.h usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity 2014-05-29 11:19:30 -07:00
max6697.h hwmon: Driver for Maxim MAX6697 and compatibles 2013-02-06 09:57:56 -08:00
mdio-gpio.h net: mdio-gpio: move platform data header 2015-10-21 19:50:44 -07:00
mfd-mcp-sa11x0.h mfd: Cleanup mfd-mcp-sa11x0.h header 2014-01-21 08:28:59 +00:00
microread.h NFC: Initial support for Inside Secure microread 2013-02-03 20:37:42 +01:00
mmc-atmel-mci.h mmc: atmel-mci: move mach header to platform_data 2014-11-10 12:40:37 +01:00
mmc-davinci.h ARM: davinci: mmc: derive version information from device name 2013-04-03 09:42:16 +05:30
mmc-esdhc-imx.h mmc: sdhci-esdhc-imx: add tuning-step setting support 2015-08-27 14:50:50 +02:00
mmc-mvsdio.h mmc: mvsdio: Cleanup mmc-mvsdio.h header 2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
mmc-omap.h mmc: omap_hsmmc: remove prepare/complete system suspend support. 2015-01-19 09:56:08 +01:00
mmc-pxamci.h ARM: pxa: propagate errors from regulator_enable() to pxamci 2013-07-23 12:15:15 -07:00
mmc-s3cmci.h
mmc-sdhci-s3c.h mmc: sdhci-s3c: remove platform dependencies 2013-04-19 13:51:23 +02:00
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
mtd-davinci-aemif.h ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif 2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h nand: omap2: Add support for flash-based bad block table 2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding 2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h mtd: nand: s3c2410: Trivial cleanup in header file 2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h mtd: omap2: Cleanup header files 2014-01-11 11:39:18 -08:00
mtd-orion_nand.h mtd: orion: Cleanup mtd-orion_nand.h header 2014-01-11 11:39:23 -08:00
mv_usb.h usb: mv_usb: remove clock name from pdata 2013-04-02 11:42:47 +03:00
net-cw1200.h cw1200: rename the cw1200 platform definition header 2013-06-03 15:54:56 -04:00
nfcmrvl.h NFC: nfcmrvl: add i2c driver 2015-10-27 04:21:14 +01:00
ntc_thermistor.h hwmon: (ntc_thermistor) Add support for ncpXXwf104 2015-05-31 22:58:36 -07:00
nxp-nci.h NFC: nxp-nci: Add support for NXP NCI chips 2015-03-26 11:07:50 +01:00
omap1_bl.h
omap_drm.h staging: drm/omap: add support for ARCH_MULTIPLATFORM 2012-10-30 11:10:00 -07:00
omap-twl4030.h ASoC: omap-twl4030: Update the header file to support more boards 2012-12-07 12:54:31 +09:00
omap-wd-timer.h ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer 2012-10-29 20:49:44 -06:00
pca953x.h gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. 2013-09-19 14:37:27 +02:00
pinctrl-single.h pinctrl: single: Add support for auxdata 2013-10-10 15:30:47 -07:00
pixcir_i2c_ts.h Input: pixcir_i2c_ts - switch the device over to gpiod 2015-07-11 17:28:08 -07:00
pn544.h nfc: Fix FSF address in file headers 2013-12-11 10:56:21 -05:00
pxa2xx_udc.h ARM: move udc_pxa2xx.h to linux/platform_data 2012-11-16 11:35:30 +00:00
pxa_sdhci.h mmc: sdhci-pxav3: Move private driver data to driver source 2014-11-10 12:40:31 +01:00
regulator-haptic.h Input: add regulator haptic driver 2014-12-21 18:59:20 -08:00
remoteproc-omap.h remoteproc/omap: fix a sparse warning 2013-07-01 15:30:51 +03:00
s3c-hsotg.h ARM defconfigs: add missing inclusions of linux/platform_device.h 2013-02-14 15:14:32 -08:00
s3c-hsudc.h
sa11x0-serial.h ARM: move serial_sa1100.h header file to linux/platform_data 2012-11-16 11:35:29 +00:00
sc18is602.h
serial-imx.h serial: imx: drop support for IRDA 2015-03-07 03:26:32 +01:00
serial-omap.h ARM: OMAP: serial: remove last vestige of DTR_gpio support. 2014-11-10 09:06:44 -08:00
serial-sccnxp.h Revert "serial: sccnxp: Add DT support" 2013-08-02 15:25:19 +08:00
sh_ipmmu.h iommu/shmobile: Add iommu driver for Renesas IPMMU modules 2013-02-06 10:57:25 +01:00
shmob_drm.h
sht15.h hwmon: (sht15) add include guard 2014-01-14 21:36:53 -08:00
shtc1.h hwmon: add support for Sensirion SHTC1 sensor 2014-06-12 08:36:48 -07:00
si5351.h clk: si5351: Do not pass struct clk in platform_data 2015-05-08 11:22:30 -07:00
simplefb.h fbdev changes for 3.12: 2013-09-05 09:49:32 -07:00
sky81452-backlight.h backlight: Add support Skyworks SKY81452 backlight driver 2015-03-12 09:08:19 +00:00
spi-clps711x.h spi/clps711x: New SPI master driver 2012-12-05 23:14:38 +00:00
spi-davinci.h spi: davinci: Choose correct pre-scaler limit based on SOC 2015-07-24 17:35:51 +01:00
spi-ep93xx.h
spi-imx.h
spi-mt65xx.h spi: mediatek: fix spi incorrect endian usage 2015-08-20 11:09:47 -07:00
spi-nuc900.h spi: nuc900: Cleanup spi-nuc900.h header 2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h spi: spi-omap2-mcspi.c: Toggle CS after each word 2013-01-26 17:00:04 +08:00
spi-s3c64xx.h spi/s3c64xx: Trivial cleanup in header file 2014-02-16 09:59:13 +08:00
ssm2518.h ASoC: Add ssm2518 support 2013-05-25 10:33:30 -04:00
st21nfca.h NFC: st21nfca: Adding support for secure element 2015-01-28 00:03:36 +01:00
st33zp24.h tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy) 2015-03-18 22:43:06 +01:00
st1232_pdata.h Input: st1232 - add reset pin handling 2013-04-15 10:00:44 -07:00
st_sensors_pdata.h iio: Added ST-sensors platform data to select the DRDY interrupt pin 2013-08-03 18:40:28 +01:00
st-nci.h NFC: st-nci: Add ese-present/uicc-present dts properties 2015-10-27 03:55:10 +01:00
syscon.h mfd: syscon: Add platform data with a regmap config name 2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h Input: s3c2410 - trivial cleanup in header file 2014-02-14 00:09:43 -08:00
tsl2563.h iio:light:tsl2563 move out of staging 2013-01-27 17:37:24 +00:00
uio_dmem_genirq.h Add new uio device for dynamic memory allocation 2012-10-24 15:39:08 -07:00
uio_pruss.h uio: uio_pruss: replace private SRAM API with genalloc 2012-10-27 16:28:32 +05:30
usb3503.h usb: misc: usb3503: Add to select the ports to disable 2013-05-30 21:32:52 +09:00
usb-davinci.h
usb-ehci-mxc.h ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
usb-ehci-orion.h usb: ehci: Cleanup usb-ehci-orion.h header 2014-01-03 12:37:57 -08:00
usb-musb-ux500.h usb: musb: ux500: move channel number knowledge into the driver 2013-06-04 11:12:02 +02:00
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap1.h usb: omap1: add extcon to platform data 2013-12-06 14:36:37 -06:00
usb-omap.h mfd: omap-usb-host: override number of ports from platform data 2013-02-13 13:22:49 +02:00
usb-pxa3xx-ulpi.h
usb-rcar-phy.h phy-rcar-usb: add R8A7778 support 2013-06-11 16:11:16 +09:00
usb-s3c2410_udc.h
ux500_wdt.h watchdog: Add support for ux500_wdt watchdog 2013-02-14 00:22:53 +01:00
video_s3c.h video/s3c: move platform_data out of arch/arm 2013-04-11 14:49:20 +03:00
video-clcd-versatile.h video: fix up versatile CLCD helper move 2014-07-23 17:41:00 +02:00
video-ep93xx.h ARM/fb: ep93xx: switch framebuffer to use modedb only 2015-08-13 12:25:44 +02:00
video-imxfb.h video: imxfb: Remove unused fields from platform data structure 2014-02-28 12:35:22 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h video: pxa: Cleanup video-pxafb.h header 2014-01-17 10:57:42 +02:00
voltage-omap.h
wiznet.h
wkup_m3.h remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3 2015-06-17 09:58:08 +03:00
zforce_ts.h Input: zforce_ts - convert to use the gpiod interface 2015-07-08 21:50:57 -07:00