mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 20:05:14 +07:00
ccf4975dca
<generated/ti-pm-asm-offsets.h> is only generated and included by arch/arm/mach-omap2/, so it does not need to reside in the globally visible include/generated/. I renamed it to arch/arm/mach-omap2/pm-asm-offsets.h since the prefix 'ti-' is just redundant in mach-omap2/. My main motivation of this change is to avoid the race condition for the parallel build (-j) when CONFIG_IKHEADERS is enabled. When it is enabled, all the headers under include/ are archived into kernel/kheaders_data.tar.xz and exposed in the sysfs. In the parallel build, we have no idea in which order files are built. - If ti-pm-asm-offsets.h is built before kheaders_data.tar.xz, the header will be included in the archive. Probably nobody will use it, but it is harmless except that it will increase the archive size needlessly. - If kheaders_data.tar.xz is built before ti-pm-asm-offsets.h, the header will not be included in the archive. However, in the next build, the archive will be re-generated to include the newly-found ti-pm-asm-offsets.h. This is not nice from the build system point of view. - If ti-pm-asm-offsets.h and kheaders_data.tar.xz are built at the same time, the corrupted header might be included in the archive, which does not look nice either. This commit fixes the race. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
494 lines
11 KiB
ArmAsm
494 lines
11 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Low level suspend code for AM43XX SoCs
|
|
*
|
|
* Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Dave Gerlach, Vaibhav Bedia
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <linux/ti-emif-sram.h>
|
|
#include <linux/platform_data/pm33xx.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include <asm/memory.h>
|
|
|
|
#include "cm33xx.h"
|
|
#include "common.h"
|
|
#include "iomap.h"
|
|
#include "omap-secure.h"
|
|
#include "omap44xx.h"
|
|
#include "pm-asm-offsets.h"
|
|
#include "prm33xx.h"
|
|
#include "prcm43xx.h"
|
|
|
|
/* replicated define because linux/bitops.h cannot be included in assembly */
|
|
#define BIT(nr) (1 << (nr))
|
|
|
|
#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000
|
|
#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003
|
|
#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002
|
|
|
|
#define AM43XX_EMIF_POWEROFF_ENABLE 0x1
|
|
#define AM43XX_EMIF_POWEROFF_DISABLE 0x0
|
|
|
|
#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP 0x1
|
|
#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO 0x3
|
|
|
|
#define AM43XX_CM_BASE 0x44DF0000
|
|
|
|
#define AM43XX_CM_REGADDR(inst, reg) \
|
|
AM33XX_L4_WK_IO_ADDRESS(AM43XX_CM_BASE + (inst) + (reg))
|
|
|
|
#define AM43XX_CM_MPU_CLKSTCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
|
|
AM43XX_CM_MPU_MPU_CDOFFS)
|
|
#define AM43XX_CM_MPU_MPU_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
|
|
AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET)
|
|
#define AM43XX_CM_PER_EMIF_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_PER_INST, \
|
|
AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
|
|
#define AM43XX_PRM_EMIF_CTRL_OFFSET 0x0030
|
|
|
|
#define RTC_SECONDS_REG 0x0
|
|
#define RTC_PMIC_REG 0x98
|
|
#define RTC_PMIC_POWER_EN BIT(16)
|
|
#define RTC_PMIC_EXT_WAKEUP_STS BIT(12)
|
|
#define RTC_PMIC_EXT_WAKEUP_POL BIT(4)
|
|
#define RTC_PMIC_EXT_WAKEUP_EN BIT(0)
|
|
|
|
.arm
|
|
.arch armv7-a
|
|
.arch_extension sec
|
|
.align 3
|
|
|
|
ENTRY(am43xx_do_wfi)
|
|
stmfd sp!, {r4 - r11, lr} @ save registers on stack
|
|
|
|
/* Save wfi_flags arg to data space */
|
|
mov r4, r0
|
|
adr r3, am43xx_pm_ro_sram_data
|
|
ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
|
|
str r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
/* Retrieve l2 cache virt address BEFORE we shut off EMIF */
|
|
ldr r1, get_l2cache_base
|
|
blx r1
|
|
mov r8, r0
|
|
#endif
|
|
|
|
/* Only flush cache is we know we are losing MPU context */
|
|
tst r4, #WFI_FLAG_FLUSH_CACHE
|
|
beq cache_skip_flush
|
|
|
|
/*
|
|
* Flush all data from the L1 and L2 data cache before disabling
|
|
* SCTLR.C bit.
|
|
*/
|
|
ldr r1, kernel_flush
|
|
blx r1
|
|
|
|
/*
|
|
* Clear the SCTLR.C bit to prevent further data cache
|
|
* allocation. Clearing SCTLR.C would make all the data accesses
|
|
* strongly ordered and would not hit the cache.
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #(1 << 2) @ Disable the C bit
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
isb
|
|
dsb
|
|
|
|
/*
|
|
* Invalidate L1 and L2 data cache.
|
|
*/
|
|
ldr r1, kernel_flush
|
|
blx r1
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
/*
|
|
* Clean and invalidate the L2 cache.
|
|
*/
|
|
#ifdef CONFIG_PL310_ERRATA_727915
|
|
mov r0, #0x03
|
|
mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
|
|
dsb
|
|
smc #0
|
|
dsb
|
|
#endif
|
|
mov r0, r8
|
|
adr r4, am43xx_pm_ro_sram_data
|
|
ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
|
|
|
|
mov r2, r0
|
|
ldr r0, [r2, #L2X0_AUX_CTRL]
|
|
str r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
|
|
ldr r0, [r2, #L310_PREFETCH_CTRL]
|
|
str r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
|
|
|
|
ldr r0, l2_val
|
|
str r0, [r2, #L2X0_CLEAN_INV_WAY]
|
|
wait:
|
|
ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
|
|
ldr r1, l2_val
|
|
ands r0, r0, r1
|
|
bne wait
|
|
#ifdef CONFIG_PL310_ERRATA_727915
|
|
mov r0, #0x00
|
|
mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
|
|
dsb
|
|
smc #0
|
|
dsb
|
|
#endif
|
|
l2x_sync:
|
|
mov r0, r8
|
|
mov r2, r0
|
|
mov r0, #0x0
|
|
str r0, [r2, #L2X0_CACHE_SYNC]
|
|
sync:
|
|
ldr r0, [r2, #L2X0_CACHE_SYNC]
|
|
ands r0, r0, #0x1
|
|
bne sync
|
|
#endif
|
|
|
|
/* Restore wfi_flags */
|
|
adr r3, am43xx_pm_ro_sram_data
|
|
ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
|
|
ldr r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]
|
|
|
|
cache_skip_flush:
|
|
/*
|
|
* If we are trying to enter RTC+DDR mode we must perform
|
|
* a read from the rtc address space to ensure translation
|
|
* presence in the TLB to avoid page table walk after DDR
|
|
* is unavailable.
|
|
*/
|
|
tst r4, #WFI_FLAG_RTC_ONLY
|
|
beq skip_rtc_va_refresh
|
|
|
|
adr r3, am43xx_pm_ro_sram_data
|
|
ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]
|
|
ldr r0, [r1]
|
|
|
|
skip_rtc_va_refresh:
|
|
/* Check if we want self refresh */
|
|
tst r4, #WFI_FLAG_SELF_REFRESH
|
|
beq emif_skip_enter_sr
|
|
|
|
adr r9, am43xx_emif_sram_table
|
|
|
|
ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
|
|
blx r3
|
|
|
|
emif_skip_enter_sr:
|
|
/* Only necessary if PER is losing context */
|
|
tst r4, #WFI_FLAG_SAVE_EMIF
|
|
beq emif_skip_save
|
|
|
|
ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
|
|
blx r3
|
|
|
|
emif_skip_save:
|
|
/* Only can disable EMIF if we have entered self refresh */
|
|
tst r4, #WFI_FLAG_SELF_REFRESH
|
|
beq emif_skip_disable
|
|
|
|
/* Disable EMIF */
|
|
ldr r1, am43xx_virt_emif_clkctrl
|
|
ldr r2, [r1]
|
|
bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
|
|
str r2, [r1]
|
|
|
|
wait_emif_disable:
|
|
ldr r2, [r1]
|
|
mov r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
|
|
cmp r2, r3
|
|
bne wait_emif_disable
|
|
|
|
emif_skip_disable:
|
|
tst r4, #WFI_FLAG_RTC_ONLY
|
|
beq skip_rtc_only
|
|
|
|
adr r3, am43xx_pm_ro_sram_data
|
|
ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]
|
|
|
|
ldr r0, [r1, #RTC_PMIC_REG]
|
|
orr r0, r0, #RTC_PMIC_POWER_EN
|
|
orr r0, r0, #RTC_PMIC_EXT_WAKEUP_STS
|
|
orr r0, r0, #RTC_PMIC_EXT_WAKEUP_EN
|
|
orr r0, r0, #RTC_PMIC_EXT_WAKEUP_POL
|
|
str r0, [r1, #RTC_PMIC_REG]
|
|
ldr r0, [r1, #RTC_PMIC_REG]
|
|
/* Wait for 2 seconds to lose power */
|
|
mov r3, #2
|
|
ldr r2, [r1, #RTC_SECONDS_REG]
|
|
rtc_loop:
|
|
ldr r0, [r1, #RTC_SECONDS_REG]
|
|
cmp r0, r2
|
|
beq rtc_loop
|
|
mov r2, r0
|
|
subs r3, r3, #1
|
|
bne rtc_loop
|
|
|
|
b re_enable_emif
|
|
|
|
skip_rtc_only:
|
|
|
|
tst r4, #WFI_FLAG_WAKE_M3
|
|
beq wkup_m3_skip
|
|
|
|
/*
|
|
* For the MPU WFI to be registered as an interrupt
|
|
* to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
|
|
* to DISABLED
|
|
*/
|
|
ldr r1, am43xx_virt_mpu_clkctrl
|
|
ldr r2, [r1]
|
|
bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
|
|
str r2, [r1]
|
|
|
|
/*
|
|
* Put MPU CLKDM to SW_SLEEP
|
|
*/
|
|
ldr r1, am43xx_virt_mpu_clkstctrl
|
|
mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP
|
|
str r2, [r1]
|
|
|
|
wkup_m3_skip:
|
|
/*
|
|
* Execute a barrier instruction to ensure that all cache,
|
|
* TLB and branch predictor maintenance operations issued
|
|
* have completed.
|
|
*/
|
|
dsb
|
|
dmb
|
|
|
|
/*
|
|
* Execute a WFI instruction and wait until the
|
|
* STANDBYWFI output is asserted to indicate that the
|
|
* CPU is in idle and low power state. CPU can specualatively
|
|
* prefetch the instructions so add NOPs after WFI. Sixteen
|
|
* NOPs as per Cortex-A9 pipeline.
|
|
*/
|
|
wfi
|
|
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
/* We come here in case of an abort due to a late interrupt */
|
|
ldr r1, am43xx_virt_mpu_clkstctrl
|
|
mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
|
|
str r2, [r1]
|
|
|
|
/* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
|
|
ldr r1, am43xx_virt_mpu_clkctrl
|
|
mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
|
|
str r2, [r1]
|
|
|
|
re_enable_emif:
|
|
/* Re-enable EMIF */
|
|
ldr r1, am43xx_virt_emif_clkctrl
|
|
mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
|
|
str r2, [r1]
|
|
wait_emif_enable:
|
|
ldr r3, [r1]
|
|
cmp r2, r3
|
|
bne wait_emif_enable
|
|
|
|
tst r4, #WFI_FLAG_FLUSH_CACHE
|
|
beq cache_skip_restore
|
|
|
|
/*
|
|
* Set SCTLR.C bit to allow data cache allocation
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
orr r0, r0, #(1 << 2) @ Enable the C bit
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
isb
|
|
|
|
cache_skip_restore:
|
|
/* Only necessary if PER is losing context */
|
|
tst r4, #WFI_FLAG_SELF_REFRESH
|
|
beq emif_skip_exit_sr_abt
|
|
|
|
adr r9, am43xx_emif_sram_table
|
|
ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
|
|
blx r1
|
|
|
|
emif_skip_exit_sr_abt:
|
|
/* Let the suspend code know about the abort */
|
|
mov r0, #1
|
|
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
|
|
ENDPROC(am43xx_do_wfi)
|
|
|
|
.align
|
|
ENTRY(am43xx_resume_offset)
|
|
.word . - am43xx_do_wfi
|
|
|
|
ENTRY(am43xx_resume_from_deep_sleep)
|
|
/* Set MPU CLKSTCTRL to HW AUTO so that CPUidle works properly */
|
|
ldr r1, am43xx_virt_mpu_clkstctrl
|
|
mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
|
|
str r2, [r1]
|
|
|
|
/* For AM43xx, use EMIF power down until context is restored */
|
|
ldr r2, am43xx_phys_emif_poweroff
|
|
mov r1, #AM43XX_EMIF_POWEROFF_ENABLE
|
|
str r1, [r2, #0x0]
|
|
|
|
/* Re-enable EMIF */
|
|
ldr r1, am43xx_phys_emif_clkctrl
|
|
mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
|
|
str r2, [r1]
|
|
wait_emif_enable1:
|
|
ldr r3, [r1]
|
|
cmp r2, r3
|
|
bne wait_emif_enable1
|
|
|
|
adr r9, am43xx_emif_sram_table
|
|
|
|
ldr r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
|
|
blx r1
|
|
|
|
ldr r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
|
|
blx r1
|
|
|
|
ldr r2, am43xx_phys_emif_poweroff
|
|
mov r1, #AM43XX_EMIF_POWEROFF_DISABLE
|
|
str r1, [r2, #0x0]
|
|
|
|
ldr r1, [r9, #EMIF_PM_RUN_HW_LEVELING]
|
|
blx r1
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
ldr r2, l2_cache_base
|
|
ldr r0, [r2, #L2X0_CTRL]
|
|
and r0, #0x0f
|
|
cmp r0, #1
|
|
beq skip_l2en @ Skip if already enabled
|
|
|
|
adr r4, am43xx_pm_ro_sram_data
|
|
ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET]
|
|
ldr r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
|
|
|
|
ldr r12, l2_smc1
|
|
dsb
|
|
smc #0
|
|
dsb
|
|
set_aux_ctrl:
|
|
ldr r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
|
|
ldr r12, l2_smc2
|
|
dsb
|
|
smc #0
|
|
dsb
|
|
|
|
/* L2 invalidate on resume */
|
|
ldr r0, l2_val
|
|
ldr r2, l2_cache_base
|
|
str r0, [r2, #L2X0_INV_WAY]
|
|
wait2:
|
|
ldr r0, [r2, #L2X0_INV_WAY]
|
|
ldr r1, l2_val
|
|
ands r0, r0, r1
|
|
bne wait2
|
|
#ifdef CONFIG_PL310_ERRATA_727915
|
|
mov r0, #0x00
|
|
mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
|
|
dsb
|
|
smc #0
|
|
dsb
|
|
#endif
|
|
l2x_sync2:
|
|
ldr r2, l2_cache_base
|
|
mov r0, #0x0
|
|
str r0, [r2, #L2X0_CACHE_SYNC]
|
|
sync2:
|
|
ldr r0, [r2, #L2X0_CACHE_SYNC]
|
|
ands r0, r0, #0x1
|
|
bne sync2
|
|
|
|
mov r0, #0x1
|
|
ldr r12, l2_smc3
|
|
dsb
|
|
smc #0
|
|
dsb
|
|
#endif
|
|
skip_l2en:
|
|
/* We are back. Branch to the common CPU resume routine */
|
|
mov r0, #0
|
|
ldr pc, resume_addr
|
|
ENDPROC(am43xx_resume_from_deep_sleep)
|
|
|
|
/*
|
|
* Local variables
|
|
*/
|
|
.align
|
|
kernel_flush:
|
|
.word v7_flush_dcache_all
|
|
ddr_start:
|
|
.word PAGE_OFFSET
|
|
|
|
am43xx_phys_emif_poweroff:
|
|
.word (AM43XX_CM_BASE + AM43XX_PRM_DEVICE_INST + \
|
|
AM43XX_PRM_EMIF_CTRL_OFFSET)
|
|
am43xx_virt_mpu_clkstctrl:
|
|
.word (AM43XX_CM_MPU_CLKSTCTRL)
|
|
am43xx_virt_mpu_clkctrl:
|
|
.word (AM43XX_CM_MPU_MPU_CLKCTRL)
|
|
am43xx_virt_emif_clkctrl:
|
|
.word (AM43XX_CM_PER_EMIF_CLKCTRL)
|
|
am43xx_phys_emif_clkctrl:
|
|
.word (AM43XX_CM_BASE + AM43XX_CM_PER_INST + \
|
|
AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
/* L2 cache related defines for AM437x */
|
|
get_l2cache_base:
|
|
.word omap4_get_l2cache_base
|
|
l2_cache_base:
|
|
.word OMAP44XX_L2CACHE_BASE
|
|
l2_smc1:
|
|
.word OMAP4_MON_L2X0_PREFETCH_INDEX
|
|
l2_smc2:
|
|
.word OMAP4_MON_L2X0_AUXCTRL_INDEX
|
|
l2_smc3:
|
|
.word OMAP4_MON_L2X0_CTRL_INDEX
|
|
l2_val:
|
|
.word 0xffff
|
|
#endif
|
|
|
|
.align 3
|
|
/* DDR related defines */
|
|
ENTRY(am43xx_emif_sram_table)
|
|
.space EMIF_PM_FUNCTIONS_SIZE
|
|
|
|
ENTRY(am43xx_pm_sram)
|
|
.word am43xx_do_wfi
|
|
.word am43xx_do_wfi_sz
|
|
.word am43xx_resume_offset
|
|
.word am43xx_emif_sram_table
|
|
.word am43xx_pm_ro_sram_data
|
|
|
|
resume_addr:
|
|
.word cpu_resume - PAGE_OFFSET + 0x80000000
|
|
.align 3
|
|
|
|
ENTRY(am43xx_pm_ro_sram_data)
|
|
.space AMX3_PM_RO_SRAM_DATA_SIZE
|
|
|
|
ENTRY(am43xx_do_wfi_sz)
|
|
.word . - am43xx_do_wfi
|