AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-26 07:05:00 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
b0142a10db
linux_dsm_epyc7002/arch/arm/boot/dts/am43x-epos-evm.dts
Franklin S Cooper Jr 78b02c36e4 ARM: dts: am437xx: Enable NAND dma prefetch by default 
Currently the default method of prefetch polled shows the highest
possible read and write speed when minimal non NAND background
activity is being done. But it is also very CPU intensive to reach
these high speeds (CPU load of 99% via mtd performance tests). While
DMA prefetch only uses 50% of the CPU to achieve around 23% less in
top read and write performance.

However, as the non NAND CPU load increases the read and write
performance takes a large hit when using polled prefetch. Therefore,
prefetch dma mode ends up outperforming prefetch polled in general
"system level" test. So switch to using dma prefetch by default since
it is likely what most users would prefer.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-14 11:34:24 -07:00

799 lines
22 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* AM43x EPOS EVM */
/dts-v1/;
#include "am4372.dtsi"
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
/ {
model = "TI AM43x EPOS EVM";
compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
aliases {
display0 = &lcd0;
};
chosen {
stdout-path = &uart0;
};
vmmcsd_fixed: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
};
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
lcd0: display {
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
label = "lcd";
panel-timing {
clock-frequency = <33000000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <210>;
hback-porch = <16>;
hsync-len = <30>;
vback-porch = <10>;
vfront-porch = <22>;
vsync-len = <13>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
};
matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
&gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
&gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
&gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
&gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
&gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
&gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
linux,keymap = <0x00000201 /* P1 */
0x01000204 /* P4 */
0x02000207 /* P7 */
0x0300020a /* NUMERIC_STAR */
0x00010202 /* P2 */
0x01010205 /* P5 */
0x02010208 /* P8 */
0x03010200 /* P0 */
0x00020203 /* P3 */
0x01020206 /* P6 */
0x02020209 /* P9 */
0x0302020b /* NUMERIC_POUND */
0x00030067 /* UP */
0x0103006a /* RIGHT */
0x0203006c /* DOWN */
0x03030069>; /* LEFT */
};
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM43-EPOS-EVM";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "Speaker";
simple-audio-card,routing =
"MIC1LP", "Microphone Jack",
"MIC1RP", "Microphone Jack",
"MIC1LP", "MICBIAS",
"MIC1RP", "MICBIAS",
"Headphone Jack", "HPL",
"Headphone Jack", "HPR",
"Speaker", "SPL",
"Speaker", "SPR";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp1>;
system-clock-frequency = <12000000>;
};
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3111>;
system-clock-frequency = <12000000>;
};
};
};
&am43xx_pinmux {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */
AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
nand_flash_x8: nand_flash_x8 {
pinctrl-single,pins = <
AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
qspi1_default: qspi1_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
>;
};
pixcir_ts_pins: pixcir_ts_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
>;
};
hdq_pins: pinmux_hdq_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
vpfe1_pins_default: vpfe1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
>;
};
vpfe1_pins_sleep: vpfe1_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
&mmc1 {
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <16>;
phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};
&i2c0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <400000>;
tps65218: tps65218@24 {
reg = <0x24>;
compatible = "ti,tps65218";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
interrupt-controller;
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1144000>;
regulator-boot-on;
regulator-always-on;
};
dcdc2: regulator-dcdc2 {
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1378000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3: regulator-dcdc3 {
regulator-name = "vdcdc3";
regulator-boot-on;
regulator-always-on;
};
dcdc4: regulator-dcdc4 {
regulator-name = "vdcdc4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
dcdc5: regulator-dcdc5 {
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
dcdc6: regulator-dcdc6 {
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo1: regulator-ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
at24@50 {
compatible = "atmel,24c256";
pagesize = <64>;
reg = <0x50>;
};
pixcir_ts@5c {
compatible = "pixcir,pixcir_tangoc";
pinctrl-names = "default";
pinctrl-0 = <&pixcir_ts_pins>;
reg = <0x5c>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
};
tlv320aic3111: tlv320aic3111@18 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3111";
reg = <0x18>;
status = "okay";
ai31xx-micbias-vg = <MICBIAS_2_0V>;
/* Regulators */
HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
SPRVDD-supply = <&vbat>; /* vbat */
SPLVDD-supply = <&vbat>; /* vbat */
AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
pinctrl-names = "default";
pinctrl-0 = <&display_mux_pins>;
status = "okay";
p1 {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
* High: LCD display with analog audio via aic3111 codec
*/
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SelLCDorHDMI";
};
};
&gpio3 {
status = "okay";
};
&elm {
status = "okay";
};
&gpmc {
status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
gpmc,cs-wr-off-ns = <40>;
gpmc,adv-on-ns = <0>; /* cs-on-ns */
gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
gpmc,we-on-ns = <0>; /* cs-on-ns */
gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
gpmc,oe-on-ns = <3>; /* cs-on-ns + tRR + 2 */
gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
gpmc,access-ns = <30>; /* tCEA + 4*/
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
* which can be independently programmable. For
* NAND flash this is equal to size of erase-block */
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "NAND.SPL";
reg = <0x00000000 0x00040000>;
};
partition@1 {
label = "NAND.SPL.backup1";
reg = <0x00040000 0x00040000>;
};
partition@2 {
label = "NAND.SPL.backup2";
reg = <0x00080000 0x00040000>;
};
partition@3 {
label = "NAND.SPL.backup3";
reg = <0x000C0000 0x00040000>;
};
partition@4 {
label = "NAND.u-boot-spl-os";
reg = <0x00100000 0x00080000>;
};
partition@5 {
label = "NAND.u-boot";
reg = <0x00180000 0x00100000>;
};
partition@6 {
label = "NAND.u-boot-env";
reg = <0x00280000 0x00040000>;
};
partition@7 {
label = "NAND.u-boot-env.backup1";
reg = <0x002C0000 0x00040000>;
};
partition@8 {
label = "NAND.kernel";
reg = <0x00300000 0x00700000>;
};
partition@9 {
label = "NAND.file-system";
reg = <0x00a00000 0x1f600000>;
};
};
};
&epwmss0 {
status = "okay";
};
&tscadc {
status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&ecap0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins>;
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
status = "okay";
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
status = "okay";
};
&usb2_phy1 {
status = "okay";
};
&usb1 {
dr_mode = "peripheral";
status = "okay";
};
&usb2_phy2 {
status = "okay";
};
&usb2 {
dr_mode = "host";
status = "okay";
};
&qspi {
status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */
pinctrl-names = "default";
pinctrl-0 = <&qspi1_default>;
spi-max-frequency = <48000000>;
m25p80@0 {
compatible = "mx66l51235l";
spi-max-frequency = <48000000>;
reg = <0>;
spi-cpol;
spi-cpha;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
/* MTD partition table.
* The ROM checks the first 512KiB
* for a valid file to boot(XIP).
*/
partition@0 {
label = "QSPI.U_BOOT";
reg = <0x00000000 0x000080000>;
};
partition@1 {
label = "QSPI.U_BOOT.backup";
reg = <0x00080000 0x00080000>;
};
partition@2 {
label = "QSPI.U-BOOT-SPL_OS";
reg = <0x00100000 0x00010000>;
};
partition@3 {
label = "QSPI.U_BOOT_ENV";
reg = <0x00110000 0x00010000>;
};
partition@4 {
label = "QSPI.U-BOOT-ENV.backup";
reg = <0x00120000 0x00010000>;
};
partition@5 {
label = "QSPI.KERNEL";
reg = <0x00130000 0x0800000>;
};
partition@6 {
label = "QSPI.FILESYSTEM";
reg = <0x00930000 0x36D0000>;
};
};
};
&hdq {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&hdq_pins>;
};
&dss {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&dss_pins>;
port {
dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
};
};
&vpfe1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&vpfe1_pins_default>;
pinctrl-1 = <&vpfe1_pins_sleep>;
port {
vpfe1_ep: endpoint {
/* remote-endpoint = <&sensor>; add once we have it */
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
&mcasp1 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
pinctrl-1 = <&mcasp1_sleep_pins>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializer */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&synctimer_32kclk {
assigned-clocks = <&mux_synctimer32k_ck>;
assigned-clock-parents = <&clkdiv32k_ick>;
};
Reference in New Issue View Git Blame Copy Permalink