mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
3107fbf705
This adds DT bindings for the Intel IXP4xx Network Processing Engine (NPE). These are three firmware-executing units found in the IXP4xx SoC. These bindings use YAML. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
45 lines
1.2 KiB
YAML
45 lines
1.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
# Copyright 2019 Linaro Ltd.
|
|
%YAML 1.2
|
|
---
|
|
$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#"
|
|
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|
|
|
title: Intel IXP4xx Network Processing Engine
|
|
|
|
maintainers:
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
description: |
|
|
On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
|
|
processor that can load a firmware to perform offloading of networking
|
|
and crypto tasks. It also manages the MDIO bus to the ethernet PHYs
|
|
on the IXP4xx platform. All IXP4xx platforms have three NPEs at
|
|
consecutive memory locations. They are all included in the same
|
|
device node since they are not independent of each other.
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- items:
|
|
- const: intel,ixp4xx-network-processing-engine
|
|
|
|
reg:
|
|
minItems: 3
|
|
maxItems: 3
|
|
items:
|
|
- description: NPE0 register range
|
|
- description: NPE1 register range
|
|
- description: NPE2 register range
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
examples:
|
|
- |
|
|
npe@c8006000 {
|
|
compatible = "intel,ixp4xx-network-processing-engine";
|
|
reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
|
|
};
|