linux_dsm_epyc7002/arch/arm/mach-mvebu/coherency_ll.S
Stefan Agner 969ad77c14 ARM: mvebu: prefix coprocessor operand with p
In every other instance where mrc is used the coprocessor operand
is prefix with p (e.g. p15). Use the p prefix in this case too.
This fixes a build issue when using LLVM's integrated assembler:
  arch/arm/mach-mvebu/coherency_ll.S:69:6: error: invalid operand for instruction
   mrc 15, 0, r3, cr0, cr0, 5
       ^
  arch/arm/mach-mvebu/pmsu_ll.S:19:6: error: invalid operand for instruction
   mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID
       ^

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-04-30 09:05:44 +02:00

167 lines
4.3 KiB
ArmAsm

/*
* Coherency fabric: low level functions
*
* Copyright (C) 2012 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* This file implements the assembly function to add a CPU to the
* coherency fabric. This function is called by each of the secondary
* CPUs during their early boot in an SMP kernel, this why this
* function have to callable from assembly. It can also be called by a
* primary CPU from C code during its boot.
*/
#include <linux/linkage.h>
#define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0
#define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
#include <asm/assembler.h>
#include <asm/cp15.h>
.text
/*
* Returns the coherency base address in r1 (r0 is untouched), or 0 if
* the coherency fabric is not enabled.
*/
ENTRY(ll_get_coherency_base)
mrc p15, 0, r1, c1, c0, 0
tst r1, #CR_M @ Check MMU bit enabled
bne 1f
/*
* MMU is disabled, use the physical address of the coherency
* base address. However, if the coherency fabric isn't mapped
* (i.e its virtual address is zero), it means coherency is
* not enabled, so we return 0.
*/
ldr r1, =coherency_base
cmp r1, #0
beq 2f
adr r1, 3f
ldr r3, [r1]
ldr r1, [r1, r3]
b 2f
1:
/*
* MMU is enabled, use the virtual address of the coherency
* base address.
*/
ldr r1, =coherency_base
ldr r1, [r1]
2:
ret lr
ENDPROC(ll_get_coherency_base)
/*
* Returns the coherency CPU mask in r3 (r0 is untouched). This
* coherency CPU mask can be used with the coherency fabric
* configuration and control registers. Note that the mask is already
* endian-swapped as appropriate so that the calling functions do not
* have to care about endianness issues while accessing the coherency
* fabric registers
*/
ENTRY(ll_get_coherency_cpumask)
mrc p15, 0, r3, cr0, cr0, 5
and r3, r3, #15
mov r2, #(1 << 24)
lsl r3, r2, r3
ARM_BE8(rev r3, r3)
ret lr
ENDPROC(ll_get_coherency_cpumask)
/*
* ll_add_cpu_to_smp_group(), ll_enable_coherency() and
* ll_disable_coherency() use the strex/ldrex instructions while the
* MMU can be disabled. The Armada XP SoC has an exclusive monitor
* that tracks transactions to Device and/or SO memory and thanks to
* that, exclusive transactions are functional even when the MMU is
* disabled.
*/
ENTRY(ll_add_cpu_to_smp_group)
/*
* As r0 is not modified by ll_get_coherency_base() and
* ll_get_coherency_cpumask(), we use it to temporarly save lr
* and avoid it being modified by the branch and link
* calls. This function is used very early in the secondary
* CPU boot, and no stack is available at this point.
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
1:
ldrex r2, [r0]
orr r2, r2, r3
strex r1, r2, [r0]
cmp r1, #0
bne 1b
ret lr
ENDPROC(ll_add_cpu_to_smp_group)
ENTRY(ll_enable_coherency)
/*
* As r0 is not modified by ll_get_coherency_base() and
* ll_get_coherency_cpumask(), we use it to temporarly save lr
* and avoid it being modified by the branch and link
* calls. This function is used very early in the secondary
* CPU boot, and no stack is available at this point.
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
1:
ldrex r2, [r0]
orr r2, r2, r3
strex r1, r2, [r0]
cmp r1, #0
bne 1b
dsb
mov r0, #0
ret lr
ENDPROC(ll_enable_coherency)
ENTRY(ll_disable_coherency)
/*
* As r0 is not modified by ll_get_coherency_base() and
* ll_get_coherency_cpumask(), we use it to temporarly save lr
* and avoid it being modified by the branch and link
* calls. This function is used very early in the secondary
* CPU boot, and no stack is available at this point.
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
1:
ldrex r2, [r0]
bic r2, r2, r3
strex r1, r2, [r0]
cmp r1, #0
bne 1b
dsb
ret lr
ENDPROC(ll_disable_coherency)
.align 2
3:
.long coherency_phys_base - .