mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 23:55:36 +07:00
ae6b427132
Sometimes boot loaders set CPU frequency to a value outside of frequency table present with cpufreq core. In such cases CPU might be unstable if it has to run on that frequency for long duration of time and so its better to set it to a frequency which is specified in frequency table. On some systems we can't really say what frequency we're running at the moment and so for these we shouldn't check if we are running at a frequency present in frequency table. And so we really can't force this for all the cpufreq drivers. Hence we are created another flag here: CPUFREQ_NEED_INITIAL_FREQ_CHECK that will be marked by platforms which want to go for this check at boot time. Initially this is done for all ARM platforms but others may follow if required. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
201 lines
4.8 KiB
C
201 lines
4.8 KiB
C
/*
|
|
* kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
|
|
*
|
|
* Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <asm/proc-fns.h>
|
|
|
|
#define CPU_SW_INT_BLK BIT(28)
|
|
|
|
static struct priv
|
|
{
|
|
struct clk *cpu_clk;
|
|
struct clk *ddr_clk;
|
|
struct clk *powersave_clk;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
} priv;
|
|
|
|
#define STATE_CPU_FREQ 0x01
|
|
#define STATE_DDR_FREQ 0x02
|
|
|
|
/*
|
|
* Kirkwood can swap the clock to the CPU between two clocks:
|
|
*
|
|
* - cpu clk
|
|
* - ddr clk
|
|
*
|
|
* The frequencies are set at runtime before registering this *
|
|
* table.
|
|
*/
|
|
static struct cpufreq_frequency_table kirkwood_freq_table[] = {
|
|
{STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
|
|
{STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
|
|
{0, CPUFREQ_TABLE_END},
|
|
};
|
|
|
|
static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
|
|
{
|
|
if (__clk_is_enabled(priv.powersave_clk))
|
|
return kirkwood_freq_table[1].frequency;
|
|
return kirkwood_freq_table[0].frequency;
|
|
}
|
|
|
|
static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
|
|
unsigned int index)
|
|
{
|
|
unsigned int state = kirkwood_freq_table[index].driver_data;
|
|
unsigned long reg;
|
|
|
|
local_irq_disable();
|
|
|
|
/* Disable interrupts to the CPU */
|
|
reg = readl_relaxed(priv.base);
|
|
reg |= CPU_SW_INT_BLK;
|
|
writel_relaxed(reg, priv.base);
|
|
|
|
switch (state) {
|
|
case STATE_CPU_FREQ:
|
|
clk_disable(priv.powersave_clk);
|
|
break;
|
|
case STATE_DDR_FREQ:
|
|
clk_enable(priv.powersave_clk);
|
|
break;
|
|
}
|
|
|
|
/* Wait-for-Interrupt, while the hardware changes frequency */
|
|
cpu_do_idle();
|
|
|
|
/* Enable interrupts to the CPU */
|
|
reg = readl_relaxed(priv.base);
|
|
reg &= ~CPU_SW_INT_BLK;
|
|
writel_relaxed(reg, priv.base);
|
|
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Module init and exit code */
|
|
static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
return cpufreq_generic_init(policy, kirkwood_freq_table, 5000);
|
|
}
|
|
|
|
static struct cpufreq_driver kirkwood_cpufreq_driver = {
|
|
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
|
|
.get = kirkwood_cpufreq_get_cpu_frequency,
|
|
.verify = cpufreq_generic_frequency_table_verify,
|
|
.target_index = kirkwood_cpufreq_target,
|
|
.init = kirkwood_cpufreq_cpu_init,
|
|
.exit = cpufreq_generic_exit,
|
|
.name = "kirkwood-cpufreq",
|
|
.attr = cpufreq_generic_attr,
|
|
};
|
|
|
|
static int kirkwood_cpufreq_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np;
|
|
struct resource *res;
|
|
int err;
|
|
|
|
priv.dev = &pdev->dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv.base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(priv.base))
|
|
return PTR_ERR(priv.base);
|
|
|
|
np = of_cpu_device_node_get(0);
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "failed to get cpu device node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
|
|
if (IS_ERR(priv.cpu_clk)) {
|
|
dev_err(priv.dev, "Unable to get cpuclk");
|
|
return PTR_ERR(priv.cpu_clk);
|
|
}
|
|
|
|
clk_prepare_enable(priv.cpu_clk);
|
|
kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
|
|
|
|
priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
|
|
if (IS_ERR(priv.ddr_clk)) {
|
|
dev_err(priv.dev, "Unable to get ddrclk");
|
|
err = PTR_ERR(priv.ddr_clk);
|
|
goto out_cpu;
|
|
}
|
|
|
|
clk_prepare_enable(priv.ddr_clk);
|
|
kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
|
|
|
|
priv.powersave_clk = of_clk_get_by_name(np, "powersave");
|
|
if (IS_ERR(priv.powersave_clk)) {
|
|
dev_err(priv.dev, "Unable to get powersave");
|
|
err = PTR_ERR(priv.powersave_clk);
|
|
goto out_ddr;
|
|
}
|
|
clk_prepare(priv.powersave_clk);
|
|
|
|
of_node_put(np);
|
|
np = NULL;
|
|
|
|
err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
|
|
if (!err)
|
|
return 0;
|
|
|
|
dev_err(priv.dev, "Failed to register cpufreq driver");
|
|
|
|
clk_disable_unprepare(priv.powersave_clk);
|
|
out_ddr:
|
|
clk_disable_unprepare(priv.ddr_clk);
|
|
out_cpu:
|
|
clk_disable_unprepare(priv.cpu_clk);
|
|
of_node_put(np);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int kirkwood_cpufreq_remove(struct platform_device *pdev)
|
|
{
|
|
cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
|
|
|
|
clk_disable_unprepare(priv.powersave_clk);
|
|
clk_disable_unprepare(priv.ddr_clk);
|
|
clk_disable_unprepare(priv.cpu_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver kirkwood_cpufreq_platform_driver = {
|
|
.probe = kirkwood_cpufreq_probe,
|
|
.remove = kirkwood_cpufreq_remove,
|
|
.driver = {
|
|
.name = "kirkwood-cpufreq",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(kirkwood_cpufreq_platform_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
|
|
MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
|
|
MODULE_ALIAS("platform:kirkwood-cpufreq");
|