mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 19:19:57 +07:00
916f562fb2
side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1 -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/ tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd O2zWCGffeYs= =mK0C -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
808 lines
20 KiB
C
808 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Ingenic SoC CGU driver
|
|
*
|
|
* Copyright (c) 2013-2015 Imagination Technologies
|
|
* Author: Paul Burton <paul.burton@mips.com>
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include "cgu.h"
|
|
|
|
#define MHZ (1000 * 1000)
|
|
|
|
/**
|
|
* ingenic_cgu_gate_get() - get the value of clock gate register bit
|
|
* @cgu: reference to the CGU whose registers should be read
|
|
* @info: info struct describing the gate bit
|
|
*
|
|
* Retrieves the state of the clock gate bit described by info. The
|
|
* caller must hold cgu->lock.
|
|
*
|
|
* Return: true if the gate bit is set, else false.
|
|
*/
|
|
static inline bool
|
|
ingenic_cgu_gate_get(struct ingenic_cgu *cgu,
|
|
const struct ingenic_cgu_gate_info *info)
|
|
{
|
|
return !!(readl(cgu->base + info->reg) & BIT(info->bit))
|
|
^ info->clear_to_gate;
|
|
}
|
|
|
|
/**
|
|
* ingenic_cgu_gate_set() - set the value of clock gate register bit
|
|
* @cgu: reference to the CGU whose registers should be modified
|
|
* @info: info struct describing the gate bit
|
|
* @val: non-zero to gate a clock, otherwise zero
|
|
*
|
|
* Sets the given gate bit in order to gate or ungate a clock.
|
|
*
|
|
* The caller must hold cgu->lock.
|
|
*/
|
|
static inline void
|
|
ingenic_cgu_gate_set(struct ingenic_cgu *cgu,
|
|
const struct ingenic_cgu_gate_info *info, bool val)
|
|
{
|
|
u32 clkgr = readl(cgu->base + info->reg);
|
|
|
|
if (val ^ info->clear_to_gate)
|
|
clkgr |= BIT(info->bit);
|
|
else
|
|
clkgr &= ~BIT(info->bit);
|
|
|
|
writel(clkgr, cgu->base + info->reg);
|
|
}
|
|
|
|
/*
|
|
* PLL operations
|
|
*/
|
|
|
|
static unsigned long
|
|
ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
const struct ingenic_cgu_pll_info *pll_info;
|
|
unsigned m, n, od_enc, od;
|
|
bool bypass;
|
|
unsigned long flags;
|
|
u32 ctl;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
BUG_ON(clk_info->type != CGU_CLK_PLL);
|
|
pll_info = &clk_info->pll;
|
|
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
ctl = readl(cgu->base + pll_info->reg);
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
|
|
m = (ctl >> pll_info->m_shift) & GENMASK(pll_info->m_bits - 1, 0);
|
|
m += pll_info->m_offset;
|
|
n = (ctl >> pll_info->n_shift) & GENMASK(pll_info->n_bits - 1, 0);
|
|
n += pll_info->n_offset;
|
|
od_enc = ctl >> pll_info->od_shift;
|
|
od_enc &= GENMASK(pll_info->od_bits - 1, 0);
|
|
bypass = !pll_info->no_bypass_bit &&
|
|
!!(ctl & BIT(pll_info->bypass_bit));
|
|
|
|
if (bypass)
|
|
return parent_rate;
|
|
|
|
for (od = 0; od < pll_info->od_max; od++) {
|
|
if (pll_info->od_encoding[od] == od_enc)
|
|
break;
|
|
}
|
|
BUG_ON(od == pll_info->od_max);
|
|
od++;
|
|
|
|
return div_u64((u64)parent_rate * m, n * od);
|
|
}
|
|
|
|
static unsigned long
|
|
ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
|
|
unsigned long rate, unsigned long parent_rate,
|
|
unsigned *pm, unsigned *pn, unsigned *pod)
|
|
{
|
|
const struct ingenic_cgu_pll_info *pll_info;
|
|
unsigned m, n, od;
|
|
|
|
pll_info = &clk_info->pll;
|
|
od = 1;
|
|
|
|
/*
|
|
* The frequency after the input divider must be between 10 and 50 MHz.
|
|
* The highest divider yields the best resolution.
|
|
*/
|
|
n = parent_rate / (10 * MHZ);
|
|
n = min_t(unsigned, n, 1 << clk_info->pll.n_bits);
|
|
n = max_t(unsigned, n, pll_info->n_offset);
|
|
|
|
m = (rate / MHZ) * od * n / (parent_rate / MHZ);
|
|
m = min_t(unsigned, m, 1 << clk_info->pll.m_bits);
|
|
m = max_t(unsigned, m, pll_info->m_offset);
|
|
|
|
if (pm)
|
|
*pm = m;
|
|
if (pn)
|
|
*pn = n;
|
|
if (pod)
|
|
*pod = od;
|
|
|
|
return div_u64((u64)parent_rate * m, n * od);
|
|
}
|
|
|
|
static inline const struct ingenic_cgu_clk_info *to_clk_info(
|
|
struct ingenic_clk *ingenic_clk)
|
|
{
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
BUG_ON(clk_info->type != CGU_CLK_PLL);
|
|
|
|
return clk_info;
|
|
}
|
|
|
|
static long
|
|
ingenic_pll_round_rate(struct clk_hw *hw, unsigned long req_rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
|
|
|
|
return ingenic_pll_calc(clk_info, req_rate, *prate, NULL, NULL, NULL);
|
|
}
|
|
|
|
static int
|
|
ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
|
|
const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
|
|
unsigned long rate, flags;
|
|
unsigned int m, n, od;
|
|
u32 ctl;
|
|
|
|
rate = ingenic_pll_calc(clk_info, req_rate, parent_rate,
|
|
&m, &n, &od);
|
|
if (rate != req_rate)
|
|
pr_info("ingenic-cgu: request '%s' rate %luHz, actual %luHz\n",
|
|
clk_info->name, req_rate, rate);
|
|
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
ctl = readl(cgu->base + pll_info->reg);
|
|
|
|
ctl &= ~(GENMASK(pll_info->m_bits - 1, 0) << pll_info->m_shift);
|
|
ctl |= (m - pll_info->m_offset) << pll_info->m_shift;
|
|
|
|
ctl &= ~(GENMASK(pll_info->n_bits - 1, 0) << pll_info->n_shift);
|
|
ctl |= (n - pll_info->n_offset) << pll_info->n_shift;
|
|
|
|
ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
|
|
ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
|
|
|
|
writel(ctl, cgu->base + pll_info->reg);
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ingenic_pll_enable(struct clk_hw *hw)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
|
|
const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
|
|
const unsigned int timeout = 100;
|
|
unsigned long flags;
|
|
unsigned int i;
|
|
u32 ctl;
|
|
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
ctl = readl(cgu->base + pll_info->reg);
|
|
|
|
ctl &= ~BIT(pll_info->bypass_bit);
|
|
ctl |= BIT(pll_info->enable_bit);
|
|
|
|
writel(ctl, cgu->base + pll_info->reg);
|
|
|
|
/* wait for the PLL to stabilise */
|
|
for (i = 0; i < timeout; i++) {
|
|
ctl = readl(cgu->base + pll_info->reg);
|
|
if (ctl & BIT(pll_info->stable_bit))
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
|
|
if (i == timeout)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ingenic_pll_disable(struct clk_hw *hw)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
|
|
const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
|
|
unsigned long flags;
|
|
u32 ctl;
|
|
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
ctl = readl(cgu->base + pll_info->reg);
|
|
|
|
ctl &= ~BIT(pll_info->enable_bit);
|
|
|
|
writel(ctl, cgu->base + pll_info->reg);
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
}
|
|
|
|
static int ingenic_pll_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
|
|
const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
|
|
unsigned long flags;
|
|
u32 ctl;
|
|
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
ctl = readl(cgu->base + pll_info->reg);
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
|
|
return !!(ctl & BIT(pll_info->enable_bit));
|
|
}
|
|
|
|
static const struct clk_ops ingenic_pll_ops = {
|
|
.recalc_rate = ingenic_pll_recalc_rate,
|
|
.round_rate = ingenic_pll_round_rate,
|
|
.set_rate = ingenic_pll_set_rate,
|
|
|
|
.enable = ingenic_pll_enable,
|
|
.disable = ingenic_pll_disable,
|
|
.is_enabled = ingenic_pll_is_enabled,
|
|
};
|
|
|
|
/*
|
|
* Operations for all non-PLL clocks
|
|
*/
|
|
|
|
static u8 ingenic_clk_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
u32 reg;
|
|
u8 i, hw_idx, idx = 0;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
|
|
if (clk_info->type & CGU_CLK_MUX) {
|
|
reg = readl(cgu->base + clk_info->mux.reg);
|
|
hw_idx = (reg >> clk_info->mux.shift) &
|
|
GENMASK(clk_info->mux.bits - 1, 0);
|
|
|
|
/*
|
|
* Convert the hardware index to the parent index by skipping
|
|
* over any -1's in the parents array.
|
|
*/
|
|
for (i = 0; i < hw_idx; i++) {
|
|
if (clk_info->parents[i] != -1)
|
|
idx++;
|
|
}
|
|
}
|
|
|
|
return idx;
|
|
}
|
|
|
|
static int ingenic_clk_set_parent(struct clk_hw *hw, u8 idx)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
unsigned long flags;
|
|
u8 curr_idx, hw_idx, num_poss;
|
|
u32 reg, mask;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
|
|
if (clk_info->type & CGU_CLK_MUX) {
|
|
/*
|
|
* Convert the parent index to the hardware index by adding
|
|
* 1 for any -1 in the parents array preceding the given
|
|
* index. That is, we want the index of idx'th entry in
|
|
* clk_info->parents which does not equal -1.
|
|
*/
|
|
hw_idx = curr_idx = 0;
|
|
num_poss = 1 << clk_info->mux.bits;
|
|
for (; hw_idx < num_poss; hw_idx++) {
|
|
if (clk_info->parents[hw_idx] == -1)
|
|
continue;
|
|
if (curr_idx == idx)
|
|
break;
|
|
curr_idx++;
|
|
}
|
|
|
|
/* idx should always be a valid parent */
|
|
BUG_ON(curr_idx != idx);
|
|
|
|
mask = GENMASK(clk_info->mux.bits - 1, 0);
|
|
mask <<= clk_info->mux.shift;
|
|
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
|
|
/* write the register */
|
|
reg = readl(cgu->base + clk_info->mux.reg);
|
|
reg &= ~mask;
|
|
reg |= hw_idx << clk_info->mux.shift;
|
|
writel(reg, cgu->base + clk_info->mux.reg);
|
|
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
return idx ? -EINVAL : 0;
|
|
}
|
|
|
|
static unsigned long
|
|
ingenic_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
unsigned long rate = parent_rate;
|
|
u32 div_reg, div;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
|
|
if (clk_info->type & CGU_CLK_DIV) {
|
|
div_reg = readl(cgu->base + clk_info->div.reg);
|
|
div = (div_reg >> clk_info->div.shift) &
|
|
GENMASK(clk_info->div.bits - 1, 0);
|
|
|
|
if (clk_info->div.div_table)
|
|
div = clk_info->div.div_table[div];
|
|
else
|
|
div = (div + 1) * clk_info->div.div;
|
|
|
|
rate /= div;
|
|
} else if (clk_info->type & CGU_CLK_FIXDIV) {
|
|
rate /= clk_info->fixdiv.div;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
static unsigned int
|
|
ingenic_clk_calc_hw_div(const struct ingenic_cgu_clk_info *clk_info,
|
|
unsigned int div)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < (1 << clk_info->div.bits)
|
|
&& clk_info->div.div_table[i]; i++) {
|
|
if (clk_info->div.div_table[i] >= div)
|
|
return i;
|
|
}
|
|
|
|
return i - 1;
|
|
}
|
|
|
|
static unsigned
|
|
ingenic_clk_calc_div(const struct ingenic_cgu_clk_info *clk_info,
|
|
unsigned long parent_rate, unsigned long req_rate)
|
|
{
|
|
unsigned int div, hw_div;
|
|
|
|
/* calculate the divide */
|
|
div = DIV_ROUND_UP(parent_rate, req_rate);
|
|
|
|
if (clk_info->div.div_table) {
|
|
hw_div = ingenic_clk_calc_hw_div(clk_info, div);
|
|
|
|
return clk_info->div.div_table[hw_div];
|
|
}
|
|
|
|
/* Impose hardware constraints */
|
|
div = min_t(unsigned, div, 1 << clk_info->div.bits);
|
|
div = max_t(unsigned, div, 1);
|
|
|
|
/*
|
|
* If the divider value itself must be divided before being written to
|
|
* the divider register, we must ensure we don't have any bits set that
|
|
* would be lost as a result of doing so.
|
|
*/
|
|
div /= clk_info->div.div;
|
|
div *= clk_info->div.div;
|
|
|
|
return div;
|
|
}
|
|
|
|
static long
|
|
ingenic_clk_round_rate(struct clk_hw *hw, unsigned long req_rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
unsigned int div = 1;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
|
|
if (clk_info->type & CGU_CLK_DIV)
|
|
div = ingenic_clk_calc_div(clk_info, *parent_rate, req_rate);
|
|
else if (clk_info->type & CGU_CLK_FIXDIV)
|
|
div = clk_info->fixdiv.div;
|
|
|
|
return DIV_ROUND_UP(*parent_rate, div);
|
|
}
|
|
|
|
static int
|
|
ingenic_clk_set_rate(struct clk_hw *hw, unsigned long req_rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
const unsigned timeout = 100;
|
|
unsigned long rate, flags;
|
|
unsigned int hw_div, div, i;
|
|
u32 reg, mask;
|
|
int ret = 0;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
|
|
if (clk_info->type & CGU_CLK_DIV) {
|
|
div = ingenic_clk_calc_div(clk_info, parent_rate, req_rate);
|
|
rate = DIV_ROUND_UP(parent_rate, div);
|
|
|
|
if (rate != req_rate)
|
|
return -EINVAL;
|
|
|
|
if (clk_info->div.div_table)
|
|
hw_div = ingenic_clk_calc_hw_div(clk_info, div);
|
|
else
|
|
hw_div = ((div / clk_info->div.div) - 1);
|
|
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
reg = readl(cgu->base + clk_info->div.reg);
|
|
|
|
/* update the divide */
|
|
mask = GENMASK(clk_info->div.bits - 1, 0);
|
|
reg &= ~(mask << clk_info->div.shift);
|
|
reg |= hw_div << clk_info->div.shift;
|
|
|
|
/* clear the stop bit */
|
|
if (clk_info->div.stop_bit != -1)
|
|
reg &= ~BIT(clk_info->div.stop_bit);
|
|
|
|
/* set the change enable bit */
|
|
if (clk_info->div.ce_bit != -1)
|
|
reg |= BIT(clk_info->div.ce_bit);
|
|
|
|
/* update the hardware */
|
|
writel(reg, cgu->base + clk_info->div.reg);
|
|
|
|
/* wait for the change to take effect */
|
|
if (clk_info->div.busy_bit != -1) {
|
|
for (i = 0; i < timeout; i++) {
|
|
reg = readl(cgu->base + clk_info->div.reg);
|
|
if (!(reg & BIT(clk_info->div.busy_bit)))
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
if (i == timeout)
|
|
ret = -EBUSY;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ingenic_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
unsigned long flags;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
|
|
if (clk_info->type & CGU_CLK_GATE) {
|
|
/* ungate the clock */
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
ingenic_cgu_gate_set(cgu, &clk_info->gate, false);
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
|
|
if (clk_info->gate.delay_us)
|
|
udelay(clk_info->gate.delay_us);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ingenic_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
unsigned long flags;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
|
|
if (clk_info->type & CGU_CLK_GATE) {
|
|
/* gate the clock */
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
ingenic_cgu_gate_set(cgu, &clk_info->gate, true);
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
}
|
|
}
|
|
|
|
static int ingenic_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
|
|
struct ingenic_cgu *cgu = ingenic_clk->cgu;
|
|
const struct ingenic_cgu_clk_info *clk_info;
|
|
unsigned long flags;
|
|
int enabled = 1;
|
|
|
|
clk_info = &cgu->clock_info[ingenic_clk->idx];
|
|
|
|
if (clk_info->type & CGU_CLK_GATE) {
|
|
spin_lock_irqsave(&cgu->lock, flags);
|
|
enabled = !ingenic_cgu_gate_get(cgu, &clk_info->gate);
|
|
spin_unlock_irqrestore(&cgu->lock, flags);
|
|
}
|
|
|
|
return enabled;
|
|
}
|
|
|
|
static const struct clk_ops ingenic_clk_ops = {
|
|
.get_parent = ingenic_clk_get_parent,
|
|
.set_parent = ingenic_clk_set_parent,
|
|
|
|
.recalc_rate = ingenic_clk_recalc_rate,
|
|
.round_rate = ingenic_clk_round_rate,
|
|
.set_rate = ingenic_clk_set_rate,
|
|
|
|
.enable = ingenic_clk_enable,
|
|
.disable = ingenic_clk_disable,
|
|
.is_enabled = ingenic_clk_is_enabled,
|
|
};
|
|
|
|
/*
|
|
* Setup functions.
|
|
*/
|
|
|
|
static int ingenic_register_clock(struct ingenic_cgu *cgu, unsigned idx)
|
|
{
|
|
const struct ingenic_cgu_clk_info *clk_info = &cgu->clock_info[idx];
|
|
struct clk_init_data clk_init;
|
|
struct ingenic_clk *ingenic_clk = NULL;
|
|
struct clk *clk, *parent;
|
|
const char *parent_names[4];
|
|
unsigned caps, i, num_possible;
|
|
int err = -EINVAL;
|
|
|
|
BUILD_BUG_ON(ARRAY_SIZE(clk_info->parents) > ARRAY_SIZE(parent_names));
|
|
|
|
if (clk_info->type == CGU_CLK_EXT) {
|
|
clk = of_clk_get_by_name(cgu->np, clk_info->name);
|
|
if (IS_ERR(clk)) {
|
|
pr_err("%s: no external clock '%s' provided\n",
|
|
__func__, clk_info->name);
|
|
err = -ENODEV;
|
|
goto out;
|
|
}
|
|
err = clk_register_clkdev(clk, clk_info->name, NULL);
|
|
if (err) {
|
|
clk_put(clk);
|
|
goto out;
|
|
}
|
|
cgu->clocks.clks[idx] = clk;
|
|
return 0;
|
|
}
|
|
|
|
if (!clk_info->type) {
|
|
pr_err("%s: no clock type specified for '%s'\n", __func__,
|
|
clk_info->name);
|
|
goto out;
|
|
}
|
|
|
|
ingenic_clk = kzalloc(sizeof(*ingenic_clk), GFP_KERNEL);
|
|
if (!ingenic_clk) {
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
ingenic_clk->hw.init = &clk_init;
|
|
ingenic_clk->cgu = cgu;
|
|
ingenic_clk->idx = idx;
|
|
|
|
clk_init.name = clk_info->name;
|
|
clk_init.flags = 0;
|
|
clk_init.parent_names = parent_names;
|
|
|
|
caps = clk_info->type;
|
|
|
|
if (caps & (CGU_CLK_MUX | CGU_CLK_CUSTOM)) {
|
|
clk_init.num_parents = 0;
|
|
|
|
if (caps & CGU_CLK_MUX)
|
|
num_possible = 1 << clk_info->mux.bits;
|
|
else
|
|
num_possible = ARRAY_SIZE(clk_info->parents);
|
|
|
|
for (i = 0; i < num_possible; i++) {
|
|
if (clk_info->parents[i] == -1)
|
|
continue;
|
|
|
|
parent = cgu->clocks.clks[clk_info->parents[i]];
|
|
parent_names[clk_init.num_parents] =
|
|
__clk_get_name(parent);
|
|
clk_init.num_parents++;
|
|
}
|
|
|
|
BUG_ON(!clk_init.num_parents);
|
|
BUG_ON(clk_init.num_parents > ARRAY_SIZE(parent_names));
|
|
} else {
|
|
BUG_ON(clk_info->parents[0] == -1);
|
|
clk_init.num_parents = 1;
|
|
parent = cgu->clocks.clks[clk_info->parents[0]];
|
|
parent_names[0] = __clk_get_name(parent);
|
|
}
|
|
|
|
if (caps & CGU_CLK_CUSTOM) {
|
|
clk_init.ops = clk_info->custom.clk_ops;
|
|
|
|
caps &= ~CGU_CLK_CUSTOM;
|
|
|
|
if (caps) {
|
|
pr_err("%s: custom clock may not be combined with type 0x%x\n",
|
|
__func__, caps);
|
|
goto out;
|
|
}
|
|
} else if (caps & CGU_CLK_PLL) {
|
|
clk_init.ops = &ingenic_pll_ops;
|
|
clk_init.flags |= CLK_SET_RATE_GATE;
|
|
|
|
caps &= ~CGU_CLK_PLL;
|
|
|
|
if (caps) {
|
|
pr_err("%s: PLL may not be combined with type 0x%x\n",
|
|
__func__, caps);
|
|
goto out;
|
|
}
|
|
} else {
|
|
clk_init.ops = &ingenic_clk_ops;
|
|
}
|
|
|
|
/* nothing to do for gates or fixed dividers */
|
|
caps &= ~(CGU_CLK_GATE | CGU_CLK_FIXDIV);
|
|
|
|
if (caps & CGU_CLK_MUX) {
|
|
if (!(caps & CGU_CLK_MUX_GLITCHFREE))
|
|
clk_init.flags |= CLK_SET_PARENT_GATE;
|
|
|
|
caps &= ~(CGU_CLK_MUX | CGU_CLK_MUX_GLITCHFREE);
|
|
}
|
|
|
|
if (caps & CGU_CLK_DIV) {
|
|
caps &= ~CGU_CLK_DIV;
|
|
} else {
|
|
/* pass rate changes to the parent clock */
|
|
clk_init.flags |= CLK_SET_RATE_PARENT;
|
|
}
|
|
|
|
if (caps) {
|
|
pr_err("%s: unknown clock type 0x%x\n", __func__, caps);
|
|
goto out;
|
|
}
|
|
|
|
clk = clk_register(NULL, &ingenic_clk->hw);
|
|
if (IS_ERR(clk)) {
|
|
pr_err("%s: failed to register clock '%s'\n", __func__,
|
|
clk_info->name);
|
|
err = PTR_ERR(clk);
|
|
goto out;
|
|
}
|
|
|
|
err = clk_register_clkdev(clk, clk_info->name, NULL);
|
|
if (err)
|
|
goto out;
|
|
|
|
cgu->clocks.clks[idx] = clk;
|
|
out:
|
|
if (err)
|
|
kfree(ingenic_clk);
|
|
return err;
|
|
}
|
|
|
|
struct ingenic_cgu *
|
|
ingenic_cgu_new(const struct ingenic_cgu_clk_info *clock_info,
|
|
unsigned num_clocks, struct device_node *np)
|
|
{
|
|
struct ingenic_cgu *cgu;
|
|
|
|
cgu = kzalloc(sizeof(*cgu), GFP_KERNEL);
|
|
if (!cgu)
|
|
goto err_out;
|
|
|
|
cgu->base = of_iomap(np, 0);
|
|
if (!cgu->base) {
|
|
pr_err("%s: failed to map CGU registers\n", __func__);
|
|
goto err_out_free;
|
|
}
|
|
|
|
cgu->np = np;
|
|
cgu->clock_info = clock_info;
|
|
cgu->clocks.clk_num = num_clocks;
|
|
|
|
spin_lock_init(&cgu->lock);
|
|
|
|
return cgu;
|
|
|
|
err_out_free:
|
|
kfree(cgu);
|
|
err_out:
|
|
return NULL;
|
|
}
|
|
|
|
int ingenic_cgu_register_clocks(struct ingenic_cgu *cgu)
|
|
{
|
|
unsigned i;
|
|
int err;
|
|
|
|
cgu->clocks.clks = kcalloc(cgu->clocks.clk_num, sizeof(struct clk *),
|
|
GFP_KERNEL);
|
|
if (!cgu->clocks.clks) {
|
|
err = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
for (i = 0; i < cgu->clocks.clk_num; i++) {
|
|
err = ingenic_register_clock(cgu, i);
|
|
if (err)
|
|
goto err_out_unregister;
|
|
}
|
|
|
|
err = of_clk_add_provider(cgu->np, of_clk_src_onecell_get,
|
|
&cgu->clocks);
|
|
if (err)
|
|
goto err_out_unregister;
|
|
|
|
return 0;
|
|
|
|
err_out_unregister:
|
|
for (i = 0; i < cgu->clocks.clk_num; i++) {
|
|
if (!cgu->clocks.clks[i])
|
|
continue;
|
|
if (cgu->clock_info[i].type & CGU_CLK_EXT)
|
|
clk_put(cgu->clocks.clks[i]);
|
|
else
|
|
clk_unregister(cgu->clocks.clks[i]);
|
|
}
|
|
kfree(cgu->clocks.clks);
|
|
err_out:
|
|
return err;
|
|
}
|