linux_dsm_epyc7002/drivers/scsi
Adrian Hunter ad44837882 scsi: ufs: Add support for Auto-Hibernate Idle Timer
UFS host controllers may support an autonomous power management feature
called the Auto-Hibernate Idle Timer. The timer is set to the number of
microseconds of idle time before the UFS host controller will autonomously
put the link into Hibernate state. That will save power at the expense of
increased latency. Any access to the host controller interface registers
will automatically put the link out of Hibernate state. So once configured,
the feature is transparent to the driver.

Expose the Auto-Hibernate Idle Timer value via SysFS to allow users to
choose between power efficiency or lower latency. Set a default value of
150 ms.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21 21:21:25 -04:00
..
aacraid scsi: aacraid: Auto detect INTx or MSIx mode during sync cmd processing 2018-02-13 21:37:04 -05:00
aic7xxx scsi: aic7xxx: aic79xx: remove VLAs 2018-03-15 00:34:26 -04:00
aic94xx treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts 2017-11-21 16:35:54 -08:00
arcmsr scsi: arcmsr: Change driver version to v1.40.00.05-20180309 2018-03-21 18:46:30 -04:00
arm scsi: fas216: fix sense buffer initialization 2018-01-22 20:04:01 -05:00
be2iscsi treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts 2017-11-21 16:35:54 -08:00
bfa scsi: bfa: remove VLA 2018-03-15 00:35:43 -04:00
bnx2fc scsi: bnx2fc: Use zeroing allocator rather than allocator/memset 2018-01-10 23:25:09 -05:00
bnx2i scsi: bnx2i: Use zeroing allocator rather than allocator/memset 2018-01-04 01:13:28 -05:00
csiostor scsi: csiostor: add support for 32 bit port capabilities 2018-03-15 00:41:51 -04:00
cxgbi scsi: libcxgbi: use GFP_ATOMIC in cxgbi_conn_alloc_pdu() 2018-01-08 21:45:48 -05:00
cxlflash scsi: cxlflash: Staging to support future accelerators 2018-01-10 23:24:58 -05:00
device_handler scsi: scsi_dh_alua: Correct comment for alua_alloc_pg() 2018-03-15 00:32:02 -04:00
dpt sched/wait: Rename wait_queue_t => wait_queue_entry_t 2017-06-20 12:18:27 +02:00
esas2r scsi: esas2r: remove initialization / cleanup dead wood 2018-03-19 22:54:47 -04:00
fcoe treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
fnic scsi: fnic: use 64-bit timestamps 2018-01-22 20:03:57 -05:00
hisi_sas scsi: hisi_sas: Remove depends on HAS_DMA in case of platform dependency 2018-03-21 18:34:21 -04:00
ibmvscsi scsi: ibmvfc: Remove unneeded semicolons 2018-01-22 20:04:00 -05:00
ibmvscsi_tgt scsi: ibmvscsis: add DRC indices to debug statements 2017-12-04 22:56:04 -05:00
isci scsi: isci: remove redundant initialization to 'bit' 2018-02-13 21:37:06 -05:00
libfc scsi: libfc: remove redundant initialization of 'disc' 2018-02-13 21:37:01 -05:00
libsas scsi: libsas: Fix kernel-doc headers 2018-02-27 21:15:16 -05:00
lpfc scsi: lpfc: make several unions static, fix non-ANSI prototype 2018-03-14 23:36:37 -04:00
megaraid scsi: megaraid: Use dma_pool_zalloc() 2018-03-06 21:14:01 -05:00
mpt3sas scsi: mpt3sas: clarify mmio pointer types 2018-03-06 13:06:10 -05:00
mvsas scsi: mvsas: fix wrong endianness of sgpio api 2018-03-01 21:07:48 -05:00
osd block: fix blk_rq_append_bio 2017-12-18 13:55:43 -07:00
pcmcia scsi: remove the fdomain and fdomain_cs drivers 2018-03-19 22:54:47 -04:00
pm8001 treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts 2017-11-21 16:35:54 -08:00
qedf scsi: qedf: use correct strncpy() size 2018-02-13 21:37:02 -05:00
qedi scsi: qedi: fix build regression 2018-02-27 21:19:13 -05:00
qla2xxx scsi: qla2xxx: Update driver version to 10.00.00.06-k 2018-03-21 18:38:55 -04:00
qla4xxx scsi: qla4xxx: Use dma_pool_zalloc() 2018-02-21 22:34:43 -05:00
smartpqi scsi: smartpqi: update driver version 2018-03-21 18:51:37 -04:00
snic License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sym53c8xx_2 treewide: setup_timer() -> timer_setup() (2 field) 2017-11-21 15:57:09 -08:00
ufs scsi: ufs: Add support for Auto-Hibernate Idle Timer 2018-03-21 21:21:25 -04:00
.gitignore scsi: scsi_devinfo: Add scsi_devinfo_tbl.c 2017-10-25 05:40:22 -04:00
3w-9xxx.c scsi: 3w-9xxx: rework lock timeouts 2017-12-04 20:32:53 -05:00
3w-9xxx.h scsi: 3w-9xxx: rework lock timeouts 2017-12-04 20:32:53 -05:00
3w-sas.c scsi: 3ware: use 64-bit times for FW time sync 2017-12-04 20:32:53 -05:00
3w-sas.h
3w-xxxx.c
3w-xxxx.h
53c700_d.h_shipped
53c700.c scsi: 53c700: move bus reset to host reset 2017-08-25 17:21:11 -04:00
53c700.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
53c700.scr
a100u2w.c
a100u2w.h
a2091.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a2091.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a3000.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a3000.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a4000t.c
advansys.c
aha152x.c scsi: aha152x: drop host reset 2017-08-25 17:21:11 -04:00
aha152x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1542.c scsi: aha1542: constify pnp_device_id 2017-08-24 22:29:07 -04:00
aha1542.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1740.c scsi: aha1740: stop using scsi_unregister 2018-03-15 00:26:54 -04:00
aha1740.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
am53c974.c
atari_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
atp870u.c scsi: atp870u: 64 bit bug in atp885_init() 2018-03-01 21:10:36 -05:00
atp870u.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
BusLogic.c
BusLogic.h
bvme6000_scsi.c
ch.c scsi: ch: add refcounting 2017-08-24 22:29:06 -04:00
constants.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dc395x.c scsi: dc395x: Convert timers to use timer_setup() 2017-10-27 02:22:00 -07:00
dc395x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dmx3191d.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
dpt_i2o.c scsi: dpt_i2o: use after free in __adpt_reset() 2018-03-21 18:34:19 -04:00
dpti.h scsi: dpt_i2o: stop using scsi_unregister 2018-03-15 00:25:37 -04:00
esp_scsi.c scsi: esp_scsi: Always clear msg_out_len after MESSAGE OUT phase 2017-08-10 19:55:35 -04:00
esp_scsi.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
FlashPoint.c
g_NCR5380.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
gdth_ioctl.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth_proc.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth_proc.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth.c scsi: gdth: Convert timers to use timer_setup() 2017-10-27 02:22:00 -07:00
gdth.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gvp11.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
gvp11.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
hosts.c scsi: remove the old scsi_module.c initialization model 2018-03-19 22:54:47 -04:00
hpsa_cmd.h scsi: hpsa: update discovery polling 2017-10-25 04:55:18 -04:00
hpsa.c Driver Core updates for 4.16-rc1 2018-02-01 10:00:28 -08:00
hpsa.h scsi: hpsa: add support for legacy boards 2017-08-24 22:28:55 -04:00
hptiop.c scsi: hptiop: Simplify reset handling 2017-08-25 17:21:10 -04:00
hptiop.h
imm.c scsi: imm: drop duplicate bus_reset handler 2017-08-25 17:21:11 -04:00
imm.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
initio.c
initio.h
ipr.c scsi: ipr: Use dma_pool_zalloc() 2018-03-12 21:16:58 -04:00
ipr.h scsi: ipr: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:14 -05:00
ips.c scsi: ips: don't set .detect and .release in the host template 2018-03-15 00:26:30 -04:00
ips.h sched/wait: Rename wait_queue_t => wait_queue_entry_t 2017-06-20 12:18:27 +02:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: doc: fix iscsi-related kernel-doc warnings 2018-01-03 23:10:06 -05:00
iscsi_tcp.h
jazz_esp.c scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma calls 2018-03-12 22:05:43 -04:00
Kconfig scsi: remove the sym53c416 driver 2018-03-19 22:54:47 -04:00
lasi700.c parisc/scsi/lasi700: Fix section mismatches 2017-08-22 16:34:36 +02:00
libiscsi_tcp.c scsi: doc: fix iscsi-related kernel-doc warnings 2018-01-03 23:10:06 -05:00
libiscsi.c scsi: doc: fix iscsi-related kernel-doc warnings 2018-01-03 23:10:06 -05:00
mac53c94.c scsi: Convert to using %pOF instead of full_name 2017-08-07 14:04:02 -04:00
mac53c94.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mac_esp.c scsi: mac_esp: Fix PIO transfers for MESSAGE IN phase 2017-08-10 19:55:34 -04:00
mac_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
Makefile scsi: remove the sym53c416 driver 2018-03-19 22:54:47 -04:00
megaraid.c scsi: megaraid: fix format-overflow warning 2017-08-07 14:04:01 -04:00
megaraid.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mesh.c
mesh.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvme16x_scsi.c
mvme147.c scsi: mvme147: stop using scsi_module.c 2018-03-19 22:54:47 -04:00
mvme147.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvumi.c
mvumi.h
ncr53c8xx.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
ncr53c8xx.h
NCR5380.c SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
NCR5380.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
NCR_D700.c
NCR_D700.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
NCR_Q720.c dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags 2017-09-01 11:59:17 +02:00
NCR_Q720.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
nsp32_debug.c
nsp32_io.h
nsp32.c scsi: nsp32: fix logic bug in error handling 2017-10-16 22:38:44 -04:00
nsp32.h
osst_detect.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst.c scsi: osst: silence underflow warning in osst_verify_frame() 2017-08-24 22:29:01 -04:00
osst.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pmcraid.c scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
pmcraid.h scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
ppa.c scsi: ppa: mark expected switch fall-throughs 2017-12-04 20:32:52 -05:00
ppa.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ps3rom.c
qla1280.c timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qla1280.h timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qlogicfas408.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicfas408.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
qlogicfas.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicpti.c scsi: qlogicpti: fixup qlogicpti_reset() definition 2017-08-28 22:15:46 -04:00
qlogicpti.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
raid_class.c scsi: raid_class: Add 'JBOD' RAID level 2018-02-12 11:43:25 -05:00
script_asm.pl
scsi_common.c scsi: core: doc. fixes to scsi_common.c 2017-12-11 21:39:39 -05:00
scsi_debug.c scsi: scsi_debug: call resp_*() function after setting host_scribble 2018-02-15 18:34:24 -05:00
scsi_debugfs.c scsi: sd: Remove zone write locking 2018-01-08 22:27:32 -05:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: remove dasd devices from the scsi subsystem 2018-03-21 18:34:23 -04:00
scsi_dh.c scsi: dh: add new rdac devices 2017-12-07 21:32:03 -05:00
scsi_error.c scsi: core: fix two wrong indentation cases 2018-02-27 22:26:12 -05:00
scsi_ioctl.c scsi: Suppress gcc 7 fall-through warnings reported with W=1 2017-08-25 17:08:07 -04:00
scsi_lib_dma.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_lib.c scsi: core: Make SCSI Status CONDITION MET equivalent to GOOD 2018-03-12 21:55:24 -04:00
scsi_logging.c
scsi_logging.h SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
scsi_netlink.c
scsi_pm.c
scsi_priv.h scsi: dh: Remove scsi_dh_remove_device() 2017-12-07 21:13:45 -05:00
scsi_proc.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_sas_internal.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_scan.c scsi: core: Use blist_flags_t consistently 2017-12-14 22:30:24 -05:00
scsi_sysctl.c
scsi_sysfs.c scsi: core: host template attribute groups 2018-02-15 18:34:51 -05:00
scsi_trace.c
scsi_transport_api.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_transport_fc.c scsi: scsi_transport_fc: fix typos on 64/128 GBit define names 2018-01-03 22:51:02 -05:00
scsi_transport_iscsi.c SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
scsi_transport_sas.c scsi: scsi_transport_sas: check reply payload length instead of bidi request 2017-10-16 23:40:51 -04:00
scsi_transport_spi.c scsi: scsi_transport_spi: make two const arrays static, shrinks object size 2018-02-15 18:20:14 -05:00
scsi_transport_srp.c Revert "scsi: make 'state' device attribute pollable" 2017-11-07 09:04:32 -08:00
scsi_typedefs.h
scsi.c scsi: core: fix two wrong indentation cases 2018-02-27 22:26:12 -05:00
scsi.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsicam.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sd_dif.c
sd_zbc.c scsi: sd_zbc: Fix sd_zbc_get_seq_zones() kernel-doc header 2018-03-01 20:59:36 -05:00
sd.c SCSI postmerge on 20180202 2018-02-03 13:07:56 -08:00
sd.h scsi: sd: Remove zone write locking 2018-01-08 22:27:32 -05:00
sense_codes.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ses.c scsi: ses: don't ask for diagnostic pages repeatedly during probe 2017-12-04 22:55:59 -05:00
sg.c vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
sgiwd93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
sim710.c
sni_53c710.c
sr_ioctl.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sr_vendor.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sr.c scsi: sd: sr: Convert two assignments into warning statements 2017-08-25 17:08:08 -04:00
sr.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st.c scsi: st: fix kernel-doc mismatch 2017-12-04 20:32:53 -05:00
st.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
stex.c
storvsc_drv.c SCSI misc on 20180131 2018-01-31 11:23:28 -08:00
sun3_scsi_vme.c
sun3_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
sun3x_esp.c scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma calls 2018-03-12 22:05:43 -04:00
sun_esp.c scsi: sun_esp: fix device reference leaks 2017-06-27 21:46:55 -04:00
virtio_scsi.c scsi: virtio: virtio_scsi: Set can_queue to the length of the virtqueue. 2017-08-24 22:28:51 -04:00
vmw_pvscsi.c
vmw_pvscsi.h
wd33c93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
wd33c93.h
wd719x.c scsi: wd719x: make card_types static const, shrinks object size 2017-12-04 20:32:55 -05:00
wd719x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
xen-scsifront.c
zalon.c parisc/scsi/zalon: Fix section mismatches 2017-08-22 16:34:36 +02:00
zorro7xx.c