mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:29:47 +07:00
ab0169bb5c
So here's the Broadwell pull request. From a kernel driver pov there's two areas with big changes in Broadwell: - Completely new enumerated interrupt bits. On the plus side it now looks fairly unform and sane. - Completely new pagetable layout. To ensure minimal impact on existing platforms we've refactored both the irq and low-level gtt handling code a lot in anticipation of the bdw push. So now bdw enabling in these areas just plugs in a bunch of vfuncs. Otherwise it's all fairly harmless adjusting of switch cases and if-ladders to shovel bdw into the right blocks. So minimized impact on existing platforms. I've also merged the bdw-stage1 branch into our -nightly integration branch for the past week to make sure we don't break anything. Note that there's still quite a flurry or patches floating around, but I've figured I'll push this out. I plan to keep the bdw fixes separate from my usual -fixes stream so that you can reject them easily in case it still looks like too much churn. Also, bdw is for now hidden behind the preliminary hw enabling module option. So there's no real pressure to get follow-up patches all into 3.13. * tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits) drm/i915: Mask the vblank interrupt on bdw by default drm/i915: Wire up cpu fifo underrun reporting support for bdw drm/i915: Optimize gen8_enable|disable_vblank functions drm/i915: Wire up pipe CRC support for bdw drm/i915: Wire up PCH interrupts for bdw drm/i915: Wire up port A aux channel drm/i915: Fix up the bdw pipe interrupt enable lists drm/i915: Optimize pipe irq handling on bdw drm/i915/bdw: Take render error interrupt out of the mask drm/i915/bdw: Add BDW PCH check first drm/i915: Use hsw_crt_get_config on BDW drm/i915/bdw: Change dp aux timeout to 600us on DDIA drm/i915/bdw: Enable trickle feed on Broadwell drm/i915/bdw: WaSingleSubspanDispatchOnAALinesAndPoints drm/i915/bdw: conservative SBE VUE cache mode drm/i915/bdw: Limit SDE poly depth FIFO to 2 drm/i915/bdw: Sampler power bypass disable ddrm/i915/bdw: Disable centroid pixel perf optimization drm/i915/bdw: BWGTLB clock gate disable drm/i915/bdw: Implement edp PSR workarounds ...
3943 lines
112 KiB
C
3943 lines
112 KiB
C
/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
|
|
*/
|
|
/*
|
|
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
|
|
* All Rights Reserved.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/sysrq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/circ_buf.h>
|
|
#include <drm/drmP.h>
|
|
#include <drm/i915_drm.h>
|
|
#include "i915_drv.h"
|
|
#include "i915_trace.h"
|
|
#include "intel_drv.h"
|
|
|
|
static const u32 hpd_ibx[] = {
|
|
[HPD_CRT] = SDE_CRT_HOTPLUG,
|
|
[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
|
|
[HPD_PORT_B] = SDE_PORTB_HOTPLUG,
|
|
[HPD_PORT_C] = SDE_PORTC_HOTPLUG,
|
|
[HPD_PORT_D] = SDE_PORTD_HOTPLUG
|
|
};
|
|
|
|
static const u32 hpd_cpt[] = {
|
|
[HPD_CRT] = SDE_CRT_HOTPLUG_CPT,
|
|
[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT,
|
|
[HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
|
|
[HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,
|
|
[HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT
|
|
};
|
|
|
|
static const u32 hpd_mask_i915[] = {
|
|
[HPD_CRT] = CRT_HOTPLUG_INT_EN,
|
|
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN,
|
|
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,
|
|
[HPD_PORT_B] = PORTB_HOTPLUG_INT_EN,
|
|
[HPD_PORT_C] = PORTC_HOTPLUG_INT_EN,
|
|
[HPD_PORT_D] = PORTD_HOTPLUG_INT_EN
|
|
};
|
|
|
|
static const u32 hpd_status_gen4[] = {
|
|
[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
|
|
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X,
|
|
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,
|
|
[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
|
|
[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
|
|
[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
|
|
};
|
|
|
|
static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
|
|
[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
|
|
[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915,
|
|
[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,
|
|
[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
|
|
[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
|
|
[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
|
|
};
|
|
|
|
/* For display hotplug interrupt */
|
|
static void
|
|
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
|
|
{
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if (dev_priv->pc8.irqs_disabled) {
|
|
WARN(1, "IRQs disabled\n");
|
|
dev_priv->pc8.regsave.deimr &= ~mask;
|
|
return;
|
|
}
|
|
|
|
if ((dev_priv->irq_mask & mask) != 0) {
|
|
dev_priv->irq_mask &= ~mask;
|
|
I915_WRITE(DEIMR, dev_priv->irq_mask);
|
|
POSTING_READ(DEIMR);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
|
|
{
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if (dev_priv->pc8.irqs_disabled) {
|
|
WARN(1, "IRQs disabled\n");
|
|
dev_priv->pc8.regsave.deimr |= mask;
|
|
return;
|
|
}
|
|
|
|
if ((dev_priv->irq_mask & mask) != mask) {
|
|
dev_priv->irq_mask |= mask;
|
|
I915_WRITE(DEIMR, dev_priv->irq_mask);
|
|
POSTING_READ(DEIMR);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ilk_update_gt_irq - update GTIMR
|
|
* @dev_priv: driver private
|
|
* @interrupt_mask: mask of interrupt bits to update
|
|
* @enabled_irq_mask: mask of interrupt bits to enable
|
|
*/
|
|
static void ilk_update_gt_irq(struct drm_i915_private *dev_priv,
|
|
uint32_t interrupt_mask,
|
|
uint32_t enabled_irq_mask)
|
|
{
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if (dev_priv->pc8.irqs_disabled) {
|
|
WARN(1, "IRQs disabled\n");
|
|
dev_priv->pc8.regsave.gtimr &= ~interrupt_mask;
|
|
dev_priv->pc8.regsave.gtimr |= (~enabled_irq_mask &
|
|
interrupt_mask);
|
|
return;
|
|
}
|
|
|
|
dev_priv->gt_irq_mask &= ~interrupt_mask;
|
|
dev_priv->gt_irq_mask |= (~enabled_irq_mask & interrupt_mask);
|
|
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
|
|
POSTING_READ(GTIMR);
|
|
}
|
|
|
|
void ilk_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask)
|
|
{
|
|
ilk_update_gt_irq(dev_priv, mask, mask);
|
|
}
|
|
|
|
void ilk_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask)
|
|
{
|
|
ilk_update_gt_irq(dev_priv, mask, 0);
|
|
}
|
|
|
|
/**
|
|
* snb_update_pm_irq - update GEN6_PMIMR
|
|
* @dev_priv: driver private
|
|
* @interrupt_mask: mask of interrupt bits to update
|
|
* @enabled_irq_mask: mask of interrupt bits to enable
|
|
*/
|
|
static void snb_update_pm_irq(struct drm_i915_private *dev_priv,
|
|
uint32_t interrupt_mask,
|
|
uint32_t enabled_irq_mask)
|
|
{
|
|
uint32_t new_val;
|
|
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if (dev_priv->pc8.irqs_disabled) {
|
|
WARN(1, "IRQs disabled\n");
|
|
dev_priv->pc8.regsave.gen6_pmimr &= ~interrupt_mask;
|
|
dev_priv->pc8.regsave.gen6_pmimr |= (~enabled_irq_mask &
|
|
interrupt_mask);
|
|
return;
|
|
}
|
|
|
|
new_val = dev_priv->pm_irq_mask;
|
|
new_val &= ~interrupt_mask;
|
|
new_val |= (~enabled_irq_mask & interrupt_mask);
|
|
|
|
if (new_val != dev_priv->pm_irq_mask) {
|
|
dev_priv->pm_irq_mask = new_val;
|
|
I915_WRITE(GEN6_PMIMR, dev_priv->pm_irq_mask);
|
|
POSTING_READ(GEN6_PMIMR);
|
|
}
|
|
}
|
|
|
|
void snb_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask)
|
|
{
|
|
snb_update_pm_irq(dev_priv, mask, mask);
|
|
}
|
|
|
|
void snb_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask)
|
|
{
|
|
snb_update_pm_irq(dev_priv, mask, 0);
|
|
}
|
|
|
|
static bool ivb_can_enable_err_int(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *crtc;
|
|
enum pipe pipe;
|
|
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
for_each_pipe(pipe) {
|
|
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
|
|
|
|
if (crtc->cpu_fifo_underrun_disabled)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool cpt_can_enable_serr_int(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe;
|
|
struct intel_crtc *crtc;
|
|
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
for_each_pipe(pipe) {
|
|
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
|
|
|
|
if (crtc->pch_fifo_underrun_disabled)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ironlake_set_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum pipe pipe, bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t bit = (pipe == PIPE_A) ? DE_PIPEA_FIFO_UNDERRUN :
|
|
DE_PIPEB_FIFO_UNDERRUN;
|
|
|
|
if (enable)
|
|
ironlake_enable_display_irq(dev_priv, bit);
|
|
else
|
|
ironlake_disable_display_irq(dev_priv, bit);
|
|
}
|
|
|
|
static void ivybridge_set_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum pipe pipe, bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
if (enable) {
|
|
I915_WRITE(GEN7_ERR_INT, ERR_INT_FIFO_UNDERRUN(pipe));
|
|
|
|
if (!ivb_can_enable_err_int(dev))
|
|
return;
|
|
|
|
ironlake_enable_display_irq(dev_priv, DE_ERR_INT_IVB);
|
|
} else {
|
|
bool was_enabled = !(I915_READ(DEIMR) & DE_ERR_INT_IVB);
|
|
|
|
/* Change the state _after_ we've read out the current one. */
|
|
ironlake_disable_display_irq(dev_priv, DE_ERR_INT_IVB);
|
|
|
|
if (!was_enabled &&
|
|
(I915_READ(GEN7_ERR_INT) & ERR_INT_FIFO_UNDERRUN(pipe))) {
|
|
DRM_DEBUG_KMS("uncleared fifo underrun on pipe %c\n",
|
|
pipe_name(pipe));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void broadwell_set_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum pipe pipe, bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if (enable)
|
|
dev_priv->de_irq_mask[pipe] &= ~GEN8_PIPE_FIFO_UNDERRUN;
|
|
else
|
|
dev_priv->de_irq_mask[pipe] |= GEN8_PIPE_FIFO_UNDERRUN;
|
|
I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
|
|
POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
|
|
}
|
|
|
|
/**
|
|
* ibx_display_interrupt_update - update SDEIMR
|
|
* @dev_priv: driver private
|
|
* @interrupt_mask: mask of interrupt bits to update
|
|
* @enabled_irq_mask: mask of interrupt bits to enable
|
|
*/
|
|
static void ibx_display_interrupt_update(struct drm_i915_private *dev_priv,
|
|
uint32_t interrupt_mask,
|
|
uint32_t enabled_irq_mask)
|
|
{
|
|
uint32_t sdeimr = I915_READ(SDEIMR);
|
|
sdeimr &= ~interrupt_mask;
|
|
sdeimr |= (~enabled_irq_mask & interrupt_mask);
|
|
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if (dev_priv->pc8.irqs_disabled &&
|
|
(interrupt_mask & SDE_HOTPLUG_MASK_CPT)) {
|
|
WARN(1, "IRQs disabled\n");
|
|
dev_priv->pc8.regsave.sdeimr &= ~interrupt_mask;
|
|
dev_priv->pc8.regsave.sdeimr |= (~enabled_irq_mask &
|
|
interrupt_mask);
|
|
return;
|
|
}
|
|
|
|
I915_WRITE(SDEIMR, sdeimr);
|
|
POSTING_READ(SDEIMR);
|
|
}
|
|
#define ibx_enable_display_interrupt(dev_priv, bits) \
|
|
ibx_display_interrupt_update((dev_priv), (bits), (bits))
|
|
#define ibx_disable_display_interrupt(dev_priv, bits) \
|
|
ibx_display_interrupt_update((dev_priv), (bits), 0)
|
|
|
|
static void ibx_set_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum transcoder pch_transcoder,
|
|
bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t bit = (pch_transcoder == TRANSCODER_A) ?
|
|
SDE_TRANSA_FIFO_UNDER : SDE_TRANSB_FIFO_UNDER;
|
|
|
|
if (enable)
|
|
ibx_enable_display_interrupt(dev_priv, bit);
|
|
else
|
|
ibx_disable_display_interrupt(dev_priv, bit);
|
|
}
|
|
|
|
static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum transcoder pch_transcoder,
|
|
bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (enable) {
|
|
I915_WRITE(SERR_INT,
|
|
SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder));
|
|
|
|
if (!cpt_can_enable_serr_int(dev))
|
|
return;
|
|
|
|
ibx_enable_display_interrupt(dev_priv, SDE_ERROR_CPT);
|
|
} else {
|
|
uint32_t tmp = I915_READ(SERR_INT);
|
|
bool was_enabled = !(I915_READ(SDEIMR) & SDE_ERROR_CPT);
|
|
|
|
/* Change the state _after_ we've read out the current one. */
|
|
ibx_disable_display_interrupt(dev_priv, SDE_ERROR_CPT);
|
|
|
|
if (!was_enabled &&
|
|
(tmp & SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder))) {
|
|
DRM_DEBUG_KMS("uncleared pch fifo underrun on pch transcoder %c\n",
|
|
transcoder_name(pch_transcoder));
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* intel_set_cpu_fifo_underrun_reporting - enable/disable FIFO underrun messages
|
|
* @dev: drm device
|
|
* @pipe: pipe
|
|
* @enable: true if we want to report FIFO underrun errors, false otherwise
|
|
*
|
|
* This function makes us disable or enable CPU fifo underruns for a specific
|
|
* pipe. Notice that on some Gens (e.g. IVB, HSW), disabling FIFO underrun
|
|
* reporting for one pipe may also disable all the other CPU error interruts for
|
|
* the other pipes, due to the fact that there's just one interrupt mask/enable
|
|
* bit for all the pipes.
|
|
*
|
|
* Returns the previous state of underrun reporting.
|
|
*/
|
|
bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum pipe pipe, bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
unsigned long flags;
|
|
bool ret;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, flags);
|
|
|
|
ret = !intel_crtc->cpu_fifo_underrun_disabled;
|
|
|
|
if (enable == ret)
|
|
goto done;
|
|
|
|
intel_crtc->cpu_fifo_underrun_disabled = !enable;
|
|
|
|
if (IS_GEN5(dev) || IS_GEN6(dev))
|
|
ironlake_set_fifo_underrun_reporting(dev, pipe, enable);
|
|
else if (IS_GEN7(dev))
|
|
ivybridge_set_fifo_underrun_reporting(dev, pipe, enable);
|
|
else if (IS_GEN8(dev))
|
|
broadwell_set_fifo_underrun_reporting(dev, pipe, enable);
|
|
|
|
done:
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* intel_set_pch_fifo_underrun_reporting - enable/disable FIFO underrun messages
|
|
* @dev: drm device
|
|
* @pch_transcoder: the PCH transcoder (same as pipe on IVB and older)
|
|
* @enable: true if we want to report FIFO underrun errors, false otherwise
|
|
*
|
|
* This function makes us disable or enable PCH fifo underruns for a specific
|
|
* PCH transcoder. Notice that on some PCHs (e.g. CPT/PPT), disabling FIFO
|
|
* underrun reporting for one transcoder may also disable all the other PCH
|
|
* error interruts for the other transcoders, due to the fact that there's just
|
|
* one interrupt mask/enable bit for all the transcoders.
|
|
*
|
|
* Returns the previous state of underrun reporting.
|
|
*/
|
|
bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
|
|
enum transcoder pch_transcoder,
|
|
bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pch_transcoder];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
unsigned long flags;
|
|
bool ret;
|
|
|
|
/*
|
|
* NOTE: Pre-LPT has a fixed cpu pipe -> pch transcoder mapping, but LPT
|
|
* has only one pch transcoder A that all pipes can use. To avoid racy
|
|
* pch transcoder -> pipe lookups from interrupt code simply store the
|
|
* underrun statistics in crtc A. Since we never expose this anywhere
|
|
* nor use it outside of the fifo underrun code here using the "wrong"
|
|
* crtc on LPT won't cause issues.
|
|
*/
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, flags);
|
|
|
|
ret = !intel_crtc->pch_fifo_underrun_disabled;
|
|
|
|
if (enable == ret)
|
|
goto done;
|
|
|
|
intel_crtc->pch_fifo_underrun_disabled = !enable;
|
|
|
|
if (HAS_PCH_IBX(dev))
|
|
ibx_set_fifo_underrun_reporting(dev, pch_transcoder, enable);
|
|
else
|
|
cpt_set_fifo_underrun_reporting(dev, pch_transcoder, enable);
|
|
|
|
done:
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
|
|
void
|
|
i915_enable_pipestat(drm_i915_private_t *dev_priv, enum pipe pipe, u32 mask)
|
|
{
|
|
u32 reg = PIPESTAT(pipe);
|
|
u32 pipestat = I915_READ(reg) & 0x7fff0000;
|
|
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if ((pipestat & mask) == mask)
|
|
return;
|
|
|
|
/* Enable the interrupt, clear any pending status */
|
|
pipestat |= mask | (mask >> 16);
|
|
I915_WRITE(reg, pipestat);
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
void
|
|
i915_disable_pipestat(drm_i915_private_t *dev_priv, enum pipe pipe, u32 mask)
|
|
{
|
|
u32 reg = PIPESTAT(pipe);
|
|
u32 pipestat = I915_READ(reg) & 0x7fff0000;
|
|
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if ((pipestat & mask) == 0)
|
|
return;
|
|
|
|
pipestat &= ~mask;
|
|
I915_WRITE(reg, pipestat);
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
/**
|
|
* i915_enable_asle_pipestat - enable ASLE pipestat for OpRegion
|
|
*/
|
|
static void i915_enable_asle_pipestat(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
if (!dev_priv->opregion.asle || !IS_MOBILE(dev))
|
|
return;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
|
|
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_LEGACY_BLC_EVENT_ENABLE);
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
i915_enable_pipestat(dev_priv, PIPE_A,
|
|
PIPE_LEGACY_BLC_EVENT_ENABLE);
|
|
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
/**
|
|
* i915_pipe_enabled - check if a pipe is enabled
|
|
* @dev: DRM device
|
|
* @pipe: pipe to check
|
|
*
|
|
* Reading certain registers when the pipe is disabled can hang the chip.
|
|
* Use this routine to make sure the PLL is running and the pipe is active
|
|
* before reading such registers if unsure.
|
|
*/
|
|
static int
|
|
i915_pipe_enabled(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
|
|
/* Locking is horribly broken here, but whatever. */
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
return intel_crtc->active;
|
|
} else {
|
|
return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE;
|
|
}
|
|
}
|
|
|
|
static u32 i8xx_get_vblank_counter(struct drm_device *dev, int pipe)
|
|
{
|
|
/* Gen2 doesn't have a hardware frame counter */
|
|
return 0;
|
|
}
|
|
|
|
/* Called from drm generic code, passed a 'crtc', which
|
|
* we use as a pipe index
|
|
*/
|
|
static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long high_frame;
|
|
unsigned long low_frame;
|
|
u32 high1, high2, low, pixel, vbl_start;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe)) {
|
|
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
|
|
"pipe %c\n", pipe_name(pipe));
|
|
return 0;
|
|
}
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
|
|
struct intel_crtc *intel_crtc =
|
|
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
|
|
const struct drm_display_mode *mode =
|
|
&intel_crtc->config.adjusted_mode;
|
|
|
|
vbl_start = mode->crtc_vblank_start * mode->crtc_htotal;
|
|
} else {
|
|
enum transcoder cpu_transcoder =
|
|
intel_pipe_to_cpu_transcoder(dev_priv, pipe);
|
|
u32 htotal;
|
|
|
|
htotal = ((I915_READ(HTOTAL(cpu_transcoder)) >> 16) & 0x1fff) + 1;
|
|
vbl_start = (I915_READ(VBLANK(cpu_transcoder)) & 0x1fff) + 1;
|
|
|
|
vbl_start *= htotal;
|
|
}
|
|
|
|
high_frame = PIPEFRAME(pipe);
|
|
low_frame = PIPEFRAMEPIXEL(pipe);
|
|
|
|
/*
|
|
* High & low register fields aren't synchronized, so make sure
|
|
* we get a low value that's stable across two reads of the high
|
|
* register.
|
|
*/
|
|
do {
|
|
high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
|
|
low = I915_READ(low_frame);
|
|
high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
|
|
} while (high1 != high2);
|
|
|
|
high1 >>= PIPE_FRAME_HIGH_SHIFT;
|
|
pixel = low & PIPE_PIXEL_MASK;
|
|
low >>= PIPE_FRAME_LOW_SHIFT;
|
|
|
|
/*
|
|
* The frame counter increments at beginning of active.
|
|
* Cook up a vblank counter by also checking the pixel
|
|
* counter against vblank start.
|
|
*/
|
|
return ((high1 << 8) | low) + (pixel >= vbl_start);
|
|
}
|
|
|
|
static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int reg = PIPE_FRMCOUNT_GM45(pipe);
|
|
|
|
if (!i915_pipe_enabled(dev, pipe)) {
|
|
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
|
|
"pipe %c\n", pipe_name(pipe));
|
|
return 0;
|
|
}
|
|
|
|
return I915_READ(reg);
|
|
}
|
|
|
|
/* raw reads, only for fast reads of display block, no need for forcewake etc. */
|
|
#define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__))
|
|
#define __raw_i915_read16(dev_priv__, reg__) readw((dev_priv__)->regs + (reg__))
|
|
|
|
static bool intel_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t status;
|
|
int reg;
|
|
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
status = pipe == PIPE_A ?
|
|
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT :
|
|
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
|
|
reg = VLV_ISR;
|
|
} else if (IS_GEN2(dev)) {
|
|
status = pipe == PIPE_A ?
|
|
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT :
|
|
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
|
|
reg = ISR;
|
|
} else if (INTEL_INFO(dev)->gen < 5) {
|
|
status = pipe == PIPE_A ?
|
|
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT :
|
|
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
|
|
reg = ISR;
|
|
} else if (INTEL_INFO(dev)->gen < 7) {
|
|
status = pipe == PIPE_A ?
|
|
DE_PIPEA_VBLANK :
|
|
DE_PIPEB_VBLANK;
|
|
|
|
reg = DEISR;
|
|
} else {
|
|
switch (pipe) {
|
|
default:
|
|
case PIPE_A:
|
|
status = DE_PIPEA_VBLANK_IVB;
|
|
break;
|
|
case PIPE_B:
|
|
status = DE_PIPEB_VBLANK_IVB;
|
|
break;
|
|
case PIPE_C:
|
|
status = DE_PIPEC_VBLANK_IVB;
|
|
break;
|
|
}
|
|
|
|
reg = DEISR;
|
|
}
|
|
|
|
if (IS_GEN2(dev))
|
|
return __raw_i915_read16(dev_priv, reg) & status;
|
|
else
|
|
return __raw_i915_read32(dev_priv, reg) & status;
|
|
}
|
|
|
|
static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
|
|
int *vpos, int *hpos, ktime_t *stime, ktime_t *etime)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
const struct drm_display_mode *mode = &intel_crtc->config.adjusted_mode;
|
|
int position;
|
|
int vbl_start, vbl_end, htotal, vtotal;
|
|
bool in_vbl = true;
|
|
int ret = 0;
|
|
unsigned long irqflags;
|
|
|
|
if (!intel_crtc->active) {
|
|
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
|
|
"pipe %c\n", pipe_name(pipe));
|
|
return 0;
|
|
}
|
|
|
|
htotal = mode->crtc_htotal;
|
|
vtotal = mode->crtc_vtotal;
|
|
vbl_start = mode->crtc_vblank_start;
|
|
vbl_end = mode->crtc_vblank_end;
|
|
|
|
ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
|
|
|
|
/*
|
|
* Lock uncore.lock, as we will do multiple timing critical raw
|
|
* register reads, potentially with preemption disabled, so the
|
|
* following code must not block on uncore.lock.
|
|
*/
|
|
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
|
|
|
|
/* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */
|
|
|
|
/* Get optional system timestamp before query. */
|
|
if (stime)
|
|
*stime = ktime_get();
|
|
|
|
if (IS_GEN2(dev) || IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
|
|
/* No obvious pixelcount register. Only query vertical
|
|
* scanout position from Display scan line register.
|
|
*/
|
|
if (IS_GEN2(dev))
|
|
position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN2;
|
|
else
|
|
position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
|
|
|
|
/*
|
|
* The scanline counter increments at the leading edge
|
|
* of hsync, ie. it completely misses the active portion
|
|
* of the line. Fix up the counter at both edges of vblank
|
|
* to get a more accurate picture whether we're in vblank
|
|
* or not.
|
|
*/
|
|
in_vbl = intel_pipe_in_vblank_locked(dev, pipe);
|
|
if ((in_vbl && position == vbl_start - 1) ||
|
|
(!in_vbl && position == vbl_end - 1))
|
|
position = (position + 1) % vtotal;
|
|
} else {
|
|
/* Have access to pixelcount since start of frame.
|
|
* We can split this into vertical and horizontal
|
|
* scanout position.
|
|
*/
|
|
position = (__raw_i915_read32(dev_priv, PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
|
|
|
|
/* convert to pixel counts */
|
|
vbl_start *= htotal;
|
|
vbl_end *= htotal;
|
|
vtotal *= htotal;
|
|
}
|
|
|
|
/* Get optional system timestamp after query. */
|
|
if (etime)
|
|
*etime = ktime_get();
|
|
|
|
/* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */
|
|
|
|
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
|
|
|
|
in_vbl = position >= vbl_start && position < vbl_end;
|
|
|
|
/*
|
|
* While in vblank, position will be negative
|
|
* counting up towards 0 at vbl_end. And outside
|
|
* vblank, position will be positive counting
|
|
* up since vbl_end.
|
|
*/
|
|
if (position >= vbl_start)
|
|
position -= vbl_end;
|
|
else
|
|
position += vtotal - vbl_end;
|
|
|
|
if (IS_GEN2(dev) || IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
|
|
*vpos = position;
|
|
*hpos = 0;
|
|
} else {
|
|
*vpos = position / htotal;
|
|
*hpos = position - (*vpos * htotal);
|
|
}
|
|
|
|
/* In vblank? */
|
|
if (in_vbl)
|
|
ret |= DRM_SCANOUTPOS_INVBL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
|
|
int *max_error,
|
|
struct timeval *vblank_time,
|
|
unsigned flags)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
|
|
if (pipe < 0 || pipe >= INTEL_INFO(dev)->num_pipes) {
|
|
DRM_ERROR("Invalid crtc %d\n", pipe);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get drm_crtc to timestamp: */
|
|
crtc = intel_get_crtc_for_pipe(dev, pipe);
|
|
if (crtc == NULL) {
|
|
DRM_ERROR("Invalid crtc %d\n", pipe);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!crtc->enabled) {
|
|
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Helper routine in DRM core does all the work: */
|
|
return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
|
|
vblank_time, flags,
|
|
crtc);
|
|
}
|
|
|
|
static bool intel_hpd_irq_event(struct drm_device *dev,
|
|
struct drm_connector *connector)
|
|
{
|
|
enum drm_connector_status old_status;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
|
|
old_status = connector->status;
|
|
|
|
connector->status = connector->funcs->detect(connector, false);
|
|
if (old_status == connector->status)
|
|
return false;
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
|
|
connector->base.id,
|
|
drm_get_connector_name(connector),
|
|
drm_get_connector_status_name(old_status),
|
|
drm_get_connector_status_name(connector->status));
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Handle hotplug events outside the interrupt handler proper.
|
|
*/
|
|
#define I915_REENABLE_HOTPLUG_DELAY (2*60*1000)
|
|
|
|
static void i915_hotplug_work_func(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
hotplug_work);
|
|
struct drm_device *dev = dev_priv->dev;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_connector *intel_connector;
|
|
struct intel_encoder *intel_encoder;
|
|
struct drm_connector *connector;
|
|
unsigned long irqflags;
|
|
bool hpd_disabled = false;
|
|
bool changed = false;
|
|
u32 hpd_event_bits;
|
|
|
|
/* HPD irq before everything is fully set up. */
|
|
if (!dev_priv->enable_hotplug_processing)
|
|
return;
|
|
|
|
mutex_lock(&mode_config->mutex);
|
|
DRM_DEBUG_KMS("running encoder hotplug functions\n");
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
|
|
hpd_event_bits = dev_priv->hpd_event_bits;
|
|
dev_priv->hpd_event_bits = 0;
|
|
list_for_each_entry(connector, &mode_config->connector_list, head) {
|
|
intel_connector = to_intel_connector(connector);
|
|
intel_encoder = intel_connector->encoder;
|
|
if (intel_encoder->hpd_pin > HPD_NONE &&
|
|
dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_MARK_DISABLED &&
|
|
connector->polled == DRM_CONNECTOR_POLL_HPD) {
|
|
DRM_INFO("HPD interrupt storm detected on connector %s: "
|
|
"switching from hotplug detection to polling\n",
|
|
drm_get_connector_name(connector));
|
|
dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark = HPD_DISABLED;
|
|
connector->polled = DRM_CONNECTOR_POLL_CONNECT
|
|
| DRM_CONNECTOR_POLL_DISCONNECT;
|
|
hpd_disabled = true;
|
|
}
|
|
if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
|
|
DRM_DEBUG_KMS("Connector %s (pin %i) received hotplug event.\n",
|
|
drm_get_connector_name(connector), intel_encoder->hpd_pin);
|
|
}
|
|
}
|
|
/* if there were no outputs to poll, poll was disabled,
|
|
* therefore make sure it's enabled when disabling HPD on
|
|
* some connectors */
|
|
if (hpd_disabled) {
|
|
drm_kms_helper_poll_enable(dev);
|
|
mod_timer(&dev_priv->hotplug_reenable_timer,
|
|
jiffies + msecs_to_jiffies(I915_REENABLE_HOTPLUG_DELAY));
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
list_for_each_entry(connector, &mode_config->connector_list, head) {
|
|
intel_connector = to_intel_connector(connector);
|
|
intel_encoder = intel_connector->encoder;
|
|
if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
|
|
if (intel_encoder->hot_plug)
|
|
intel_encoder->hot_plug(intel_encoder);
|
|
if (intel_hpd_irq_event(dev, connector))
|
|
changed = true;
|
|
}
|
|
}
|
|
mutex_unlock(&mode_config->mutex);
|
|
|
|
if (changed)
|
|
drm_kms_helper_hotplug_event(dev);
|
|
}
|
|
|
|
static void ironlake_rps_change_irq_handler(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
u32 busy_up, busy_down, max_avg, min_avg;
|
|
u8 new_delay;
|
|
|
|
spin_lock(&mchdev_lock);
|
|
|
|
I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
|
|
|
|
new_delay = dev_priv->ips.cur_delay;
|
|
|
|
I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
|
|
busy_up = I915_READ(RCPREVBSYTUPAVG);
|
|
busy_down = I915_READ(RCPREVBSYTDNAVG);
|
|
max_avg = I915_READ(RCBMAXAVG);
|
|
min_avg = I915_READ(RCBMINAVG);
|
|
|
|
/* Handle RCS change request from hw */
|
|
if (busy_up > max_avg) {
|
|
if (dev_priv->ips.cur_delay != dev_priv->ips.max_delay)
|
|
new_delay = dev_priv->ips.cur_delay - 1;
|
|
if (new_delay < dev_priv->ips.max_delay)
|
|
new_delay = dev_priv->ips.max_delay;
|
|
} else if (busy_down < min_avg) {
|
|
if (dev_priv->ips.cur_delay != dev_priv->ips.min_delay)
|
|
new_delay = dev_priv->ips.cur_delay + 1;
|
|
if (new_delay > dev_priv->ips.min_delay)
|
|
new_delay = dev_priv->ips.min_delay;
|
|
}
|
|
|
|
if (ironlake_set_drps(dev, new_delay))
|
|
dev_priv->ips.cur_delay = new_delay;
|
|
|
|
spin_unlock(&mchdev_lock);
|
|
|
|
return;
|
|
}
|
|
|
|
static void notify_ring(struct drm_device *dev,
|
|
struct intel_ring_buffer *ring)
|
|
{
|
|
if (ring->obj == NULL)
|
|
return;
|
|
|
|
trace_i915_gem_request_complete(ring);
|
|
|
|
wake_up_all(&ring->irq_queue);
|
|
i915_queue_hangcheck(dev);
|
|
}
|
|
|
|
static void gen6_pm_rps_work(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
rps.work);
|
|
u32 pm_iir;
|
|
int new_delay, adj;
|
|
|
|
spin_lock_irq(&dev_priv->irq_lock);
|
|
pm_iir = dev_priv->rps.pm_iir;
|
|
dev_priv->rps.pm_iir = 0;
|
|
/* Make sure not to corrupt PMIMR state used by ringbuffer code */
|
|
snb_enable_pm_irq(dev_priv, GEN6_PM_RPS_EVENTS);
|
|
spin_unlock_irq(&dev_priv->irq_lock);
|
|
|
|
/* Make sure we didn't queue anything we're not going to process. */
|
|
WARN_ON(pm_iir & ~GEN6_PM_RPS_EVENTS);
|
|
|
|
if ((pm_iir & GEN6_PM_RPS_EVENTS) == 0)
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
|
|
adj = dev_priv->rps.last_adj;
|
|
if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) {
|
|
if (adj > 0)
|
|
adj *= 2;
|
|
else
|
|
adj = 1;
|
|
new_delay = dev_priv->rps.cur_delay + adj;
|
|
|
|
/*
|
|
* For better performance, jump directly
|
|
* to RPe if we're below it.
|
|
*/
|
|
if (new_delay < dev_priv->rps.rpe_delay)
|
|
new_delay = dev_priv->rps.rpe_delay;
|
|
} else if (pm_iir & GEN6_PM_RP_DOWN_TIMEOUT) {
|
|
if (dev_priv->rps.cur_delay > dev_priv->rps.rpe_delay)
|
|
new_delay = dev_priv->rps.rpe_delay;
|
|
else
|
|
new_delay = dev_priv->rps.min_delay;
|
|
adj = 0;
|
|
} else if (pm_iir & GEN6_PM_RP_DOWN_THRESHOLD) {
|
|
if (adj < 0)
|
|
adj *= 2;
|
|
else
|
|
adj = -1;
|
|
new_delay = dev_priv->rps.cur_delay + adj;
|
|
} else { /* unknown event */
|
|
new_delay = dev_priv->rps.cur_delay;
|
|
}
|
|
|
|
/* sysfs frequency interfaces may have snuck in while servicing the
|
|
* interrupt
|
|
*/
|
|
if (new_delay < (int)dev_priv->rps.min_delay)
|
|
new_delay = dev_priv->rps.min_delay;
|
|
if (new_delay > (int)dev_priv->rps.max_delay)
|
|
new_delay = dev_priv->rps.max_delay;
|
|
dev_priv->rps.last_adj = new_delay - dev_priv->rps.cur_delay;
|
|
|
|
if (IS_VALLEYVIEW(dev_priv->dev))
|
|
valleyview_set_rps(dev_priv->dev, new_delay);
|
|
else
|
|
gen6_set_rps(dev_priv->dev, new_delay);
|
|
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
}
|
|
|
|
|
|
/**
|
|
* ivybridge_parity_work - Workqueue called when a parity error interrupt
|
|
* occurred.
|
|
* @work: workqueue struct
|
|
*
|
|
* Doesn't actually do anything except notify userspace. As a consequence of
|
|
* this event, userspace should try to remap the bad rows since statistically
|
|
* it is likely the same row is more likely to go bad again.
|
|
*/
|
|
static void ivybridge_parity_work(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
l3_parity.error_work);
|
|
u32 error_status, row, bank, subbank;
|
|
char *parity_event[6];
|
|
uint32_t misccpctl;
|
|
unsigned long flags;
|
|
uint8_t slice = 0;
|
|
|
|
/* We must turn off DOP level clock gating to access the L3 registers.
|
|
* In order to prevent a get/put style interface, acquire struct mutex
|
|
* any time we access those registers.
|
|
*/
|
|
mutex_lock(&dev_priv->dev->struct_mutex);
|
|
|
|
/* If we've screwed up tracking, just let the interrupt fire again */
|
|
if (WARN_ON(!dev_priv->l3_parity.which_slice))
|
|
goto out;
|
|
|
|
misccpctl = I915_READ(GEN7_MISCCPCTL);
|
|
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
|
|
POSTING_READ(GEN7_MISCCPCTL);
|
|
|
|
while ((slice = ffs(dev_priv->l3_parity.which_slice)) != 0) {
|
|
u32 reg;
|
|
|
|
slice--;
|
|
if (WARN_ON_ONCE(slice >= NUM_L3_SLICES(dev_priv->dev)))
|
|
break;
|
|
|
|
dev_priv->l3_parity.which_slice &= ~(1<<slice);
|
|
|
|
reg = GEN7_L3CDERRST1 + (slice * 0x200);
|
|
|
|
error_status = I915_READ(reg);
|
|
row = GEN7_PARITY_ERROR_ROW(error_status);
|
|
bank = GEN7_PARITY_ERROR_BANK(error_status);
|
|
subbank = GEN7_PARITY_ERROR_SUBBANK(error_status);
|
|
|
|
I915_WRITE(reg, GEN7_PARITY_ERROR_VALID | GEN7_L3CDERRST1_ENABLE);
|
|
POSTING_READ(reg);
|
|
|
|
parity_event[0] = I915_L3_PARITY_UEVENT "=1";
|
|
parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row);
|
|
parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank);
|
|
parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank);
|
|
parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice);
|
|
parity_event[5] = NULL;
|
|
|
|
kobject_uevent_env(&dev_priv->dev->primary->kdev->kobj,
|
|
KOBJ_CHANGE, parity_event);
|
|
|
|
DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n",
|
|
slice, row, bank, subbank);
|
|
|
|
kfree(parity_event[4]);
|
|
kfree(parity_event[3]);
|
|
kfree(parity_event[2]);
|
|
kfree(parity_event[1]);
|
|
}
|
|
|
|
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
|
|
|
|
out:
|
|
WARN_ON(dev_priv->l3_parity.which_slice);
|
|
spin_lock_irqsave(&dev_priv->irq_lock, flags);
|
|
ilk_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv->dev));
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
|
|
|
|
mutex_unlock(&dev_priv->dev->struct_mutex);
|
|
}
|
|
|
|
static void ivybridge_parity_error_irq_handler(struct drm_device *dev, u32 iir)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
if (!HAS_L3_DPF(dev))
|
|
return;
|
|
|
|
spin_lock(&dev_priv->irq_lock);
|
|
ilk_disable_gt_irq(dev_priv, GT_PARITY_ERROR(dev));
|
|
spin_unlock(&dev_priv->irq_lock);
|
|
|
|
iir &= GT_PARITY_ERROR(dev);
|
|
if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1)
|
|
dev_priv->l3_parity.which_slice |= 1 << 1;
|
|
|
|
if (iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT)
|
|
dev_priv->l3_parity.which_slice |= 1 << 0;
|
|
|
|
queue_work(dev_priv->wq, &dev_priv->l3_parity.error_work);
|
|
}
|
|
|
|
static void ilk_gt_irq_handler(struct drm_device *dev,
|
|
struct drm_i915_private *dev_priv,
|
|
u32 gt_iir)
|
|
{
|
|
if (gt_iir &
|
|
(GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
if (gt_iir & ILK_BSD_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[VCS]);
|
|
}
|
|
|
|
static void snb_gt_irq_handler(struct drm_device *dev,
|
|
struct drm_i915_private *dev_priv,
|
|
u32 gt_iir)
|
|
{
|
|
|
|
if (gt_iir &
|
|
(GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
if (gt_iir & GT_BSD_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[VCS]);
|
|
if (gt_iir & GT_BLT_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[BCS]);
|
|
|
|
if (gt_iir & (GT_BLT_CS_ERROR_INTERRUPT |
|
|
GT_BSD_CS_ERROR_INTERRUPT |
|
|
GT_RENDER_CS_MASTER_ERROR_INTERRUPT)) {
|
|
DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
|
|
i915_handle_error(dev, false);
|
|
}
|
|
|
|
if (gt_iir & GT_PARITY_ERROR(dev))
|
|
ivybridge_parity_error_irq_handler(dev, gt_iir);
|
|
}
|
|
|
|
static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev,
|
|
struct drm_i915_private *dev_priv,
|
|
u32 master_ctl)
|
|
{
|
|
u32 rcs, bcs, vcs;
|
|
uint32_t tmp = 0;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
if (master_ctl & (GEN8_GT_RCS_IRQ | GEN8_GT_BCS_IRQ)) {
|
|
tmp = I915_READ(GEN8_GT_IIR(0));
|
|
if (tmp) {
|
|
ret = IRQ_HANDLED;
|
|
rcs = tmp >> GEN8_RCS_IRQ_SHIFT;
|
|
bcs = tmp >> GEN8_BCS_IRQ_SHIFT;
|
|
if (rcs & GT_RENDER_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
if (bcs & GT_RENDER_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[BCS]);
|
|
I915_WRITE(GEN8_GT_IIR(0), tmp);
|
|
} else
|
|
DRM_ERROR("The master control interrupt lied (GT0)!\n");
|
|
}
|
|
|
|
if (master_ctl & GEN8_GT_VCS1_IRQ) {
|
|
tmp = I915_READ(GEN8_GT_IIR(1));
|
|
if (tmp) {
|
|
ret = IRQ_HANDLED;
|
|
vcs = tmp >> GEN8_VCS1_IRQ_SHIFT;
|
|
if (vcs & GT_RENDER_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[VCS]);
|
|
I915_WRITE(GEN8_GT_IIR(1), tmp);
|
|
} else
|
|
DRM_ERROR("The master control interrupt lied (GT1)!\n");
|
|
}
|
|
|
|
if (master_ctl & GEN8_GT_VECS_IRQ) {
|
|
tmp = I915_READ(GEN8_GT_IIR(3));
|
|
if (tmp) {
|
|
ret = IRQ_HANDLED;
|
|
vcs = tmp >> GEN8_VECS_IRQ_SHIFT;
|
|
if (vcs & GT_RENDER_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[VECS]);
|
|
I915_WRITE(GEN8_GT_IIR(3), tmp);
|
|
} else
|
|
DRM_ERROR("The master control interrupt lied (GT3)!\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define HPD_STORM_DETECT_PERIOD 1000
|
|
#define HPD_STORM_THRESHOLD 5
|
|
|
|
static inline void intel_hpd_irq_handler(struct drm_device *dev,
|
|
u32 hotplug_trigger,
|
|
const u32 *hpd)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
int i;
|
|
bool storm_detected = false;
|
|
|
|
if (!hotplug_trigger)
|
|
return;
|
|
|
|
spin_lock(&dev_priv->irq_lock);
|
|
for (i = 1; i < HPD_NUM_PINS; i++) {
|
|
|
|
WARN(((hpd[i] & hotplug_trigger) &&
|
|
dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED),
|
|
"Received HPD interrupt although disabled\n");
|
|
|
|
if (!(hpd[i] & hotplug_trigger) ||
|
|
dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED)
|
|
continue;
|
|
|
|
dev_priv->hpd_event_bits |= (1 << i);
|
|
if (!time_in_range(jiffies, dev_priv->hpd_stats[i].hpd_last_jiffies,
|
|
dev_priv->hpd_stats[i].hpd_last_jiffies
|
|
+ msecs_to_jiffies(HPD_STORM_DETECT_PERIOD))) {
|
|
dev_priv->hpd_stats[i].hpd_last_jiffies = jiffies;
|
|
dev_priv->hpd_stats[i].hpd_cnt = 0;
|
|
DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: 0\n", i);
|
|
} else if (dev_priv->hpd_stats[i].hpd_cnt > HPD_STORM_THRESHOLD) {
|
|
dev_priv->hpd_stats[i].hpd_mark = HPD_MARK_DISABLED;
|
|
dev_priv->hpd_event_bits &= ~(1 << i);
|
|
DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", i);
|
|
storm_detected = true;
|
|
} else {
|
|
dev_priv->hpd_stats[i].hpd_cnt++;
|
|
DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: %d\n", i,
|
|
dev_priv->hpd_stats[i].hpd_cnt);
|
|
}
|
|
}
|
|
|
|
if (storm_detected)
|
|
dev_priv->display.hpd_irq_setup(dev);
|
|
spin_unlock(&dev_priv->irq_lock);
|
|
|
|
/*
|
|
* Our hotplug handler can grab modeset locks (by calling down into the
|
|
* fb helpers). Hence it must not be run on our own dev-priv->wq work
|
|
* queue for otherwise the flush_work in the pageflip code will
|
|
* deadlock.
|
|
*/
|
|
schedule_work(&dev_priv->hotplug_work);
|
|
}
|
|
|
|
static void gmbus_irq_handler(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
wake_up_all(&dev_priv->gmbus_wait_queue);
|
|
}
|
|
|
|
static void dp_aux_irq_handler(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
wake_up_all(&dev_priv->gmbus_wait_queue);
|
|
}
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
static void display_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe,
|
|
uint32_t crc0, uint32_t crc1,
|
|
uint32_t crc2, uint32_t crc3,
|
|
uint32_t crc4)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_pipe_crc *pipe_crc = &dev_priv->pipe_crc[pipe];
|
|
struct intel_pipe_crc_entry *entry;
|
|
int head, tail;
|
|
|
|
spin_lock(&pipe_crc->lock);
|
|
|
|
if (!pipe_crc->entries) {
|
|
spin_unlock(&pipe_crc->lock);
|
|
DRM_ERROR("spurious interrupt\n");
|
|
return;
|
|
}
|
|
|
|
head = pipe_crc->head;
|
|
tail = pipe_crc->tail;
|
|
|
|
if (CIRC_SPACE(head, tail, INTEL_PIPE_CRC_ENTRIES_NR) < 1) {
|
|
spin_unlock(&pipe_crc->lock);
|
|
DRM_ERROR("CRC buffer overflowing\n");
|
|
return;
|
|
}
|
|
|
|
entry = &pipe_crc->entries[head];
|
|
|
|
entry->frame = dev->driver->get_vblank_counter(dev, pipe);
|
|
entry->crc[0] = crc0;
|
|
entry->crc[1] = crc1;
|
|
entry->crc[2] = crc2;
|
|
entry->crc[3] = crc3;
|
|
entry->crc[4] = crc4;
|
|
|
|
head = (head + 1) & (INTEL_PIPE_CRC_ENTRIES_NR - 1);
|
|
pipe_crc->head = head;
|
|
|
|
spin_unlock(&pipe_crc->lock);
|
|
|
|
wake_up_interruptible(&pipe_crc->wq);
|
|
}
|
|
#else
|
|
static inline void
|
|
display_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe,
|
|
uint32_t crc0, uint32_t crc1,
|
|
uint32_t crc2, uint32_t crc3,
|
|
uint32_t crc4) {}
|
|
#endif
|
|
|
|
|
|
static void hsw_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
display_pipe_crc_irq_handler(dev, pipe,
|
|
I915_READ(PIPE_CRC_RES_1_IVB(pipe)),
|
|
0, 0, 0, 0);
|
|
}
|
|
|
|
static void ivb_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
display_pipe_crc_irq_handler(dev, pipe,
|
|
I915_READ(PIPE_CRC_RES_1_IVB(pipe)),
|
|
I915_READ(PIPE_CRC_RES_2_IVB(pipe)),
|
|
I915_READ(PIPE_CRC_RES_3_IVB(pipe)),
|
|
I915_READ(PIPE_CRC_RES_4_IVB(pipe)),
|
|
I915_READ(PIPE_CRC_RES_5_IVB(pipe)));
|
|
}
|
|
|
|
static void i9xx_pipe_crc_irq_handler(struct drm_device *dev, enum pipe pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t res1, res2;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 3)
|
|
res1 = I915_READ(PIPE_CRC_RES_RES1_I915(pipe));
|
|
else
|
|
res1 = 0;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
|
|
res2 = I915_READ(PIPE_CRC_RES_RES2_G4X(pipe));
|
|
else
|
|
res2 = 0;
|
|
|
|
display_pipe_crc_irq_handler(dev, pipe,
|
|
I915_READ(PIPE_CRC_RES_RED(pipe)),
|
|
I915_READ(PIPE_CRC_RES_GREEN(pipe)),
|
|
I915_READ(PIPE_CRC_RES_BLUE(pipe)),
|
|
res1, res2);
|
|
}
|
|
|
|
/* The RPS events need forcewake, so we add them to a work queue and mask their
|
|
* IMR bits until the work is done. Other interrupts can be processed without
|
|
* the work queue. */
|
|
static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir)
|
|
{
|
|
if (pm_iir & GEN6_PM_RPS_EVENTS) {
|
|
spin_lock(&dev_priv->irq_lock);
|
|
dev_priv->rps.pm_iir |= pm_iir & GEN6_PM_RPS_EVENTS;
|
|
snb_disable_pm_irq(dev_priv, pm_iir & GEN6_PM_RPS_EVENTS);
|
|
spin_unlock(&dev_priv->irq_lock);
|
|
|
|
queue_work(dev_priv->wq, &dev_priv->rps.work);
|
|
}
|
|
|
|
if (HAS_VEBOX(dev_priv->dev)) {
|
|
if (pm_iir & PM_VEBOX_USER_INTERRUPT)
|
|
notify_ring(dev_priv->dev, &dev_priv->ring[VECS]);
|
|
|
|
if (pm_iir & PM_VEBOX_CS_ERROR_INTERRUPT) {
|
|
DRM_ERROR("VEBOX CS error interrupt 0x%08x\n", pm_iir);
|
|
i915_handle_error(dev_priv->dev, false);
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t valleyview_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 iir, gt_iir, pm_iir;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
unsigned long irqflags;
|
|
int pipe;
|
|
u32 pipe_stats[I915_MAX_PIPES];
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
while (true) {
|
|
iir = I915_READ(VLV_IIR);
|
|
gt_iir = I915_READ(GTIIR);
|
|
pm_iir = I915_READ(GEN6_PMIIR);
|
|
|
|
if (gt_iir == 0 && pm_iir == 0 && iir == 0)
|
|
goto out;
|
|
|
|
ret = IRQ_HANDLED;
|
|
|
|
snb_gt_irq_handler(dev, dev_priv, gt_iir);
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
for_each_pipe(pipe) {
|
|
int reg = PIPESTAT(pipe);
|
|
pipe_stats[pipe] = I915_READ(reg);
|
|
|
|
/*
|
|
* Clear the PIPE*STAT regs before the IIR
|
|
*/
|
|
if (pipe_stats[pipe] & 0x8000ffff) {
|
|
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
|
|
DRM_DEBUG_DRIVER("pipe %c underrun\n",
|
|
pipe_name(pipe));
|
|
I915_WRITE(reg, pipe_stats[pipe]);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
for_each_pipe(pipe) {
|
|
if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS)
|
|
drm_handle_vblank(dev, pipe);
|
|
|
|
if (pipe_stats[pipe] & PLANE_FLIPDONE_INT_STATUS_VLV) {
|
|
intel_prepare_page_flip(dev, pipe);
|
|
intel_finish_page_flip(dev, pipe);
|
|
}
|
|
|
|
if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS)
|
|
i9xx_pipe_crc_irq_handler(dev, pipe);
|
|
}
|
|
|
|
/* Consume port. Then clear IIR or we'll miss events */
|
|
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
|
|
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
|
|
u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
|
|
|
|
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
|
|
hotplug_status);
|
|
|
|
intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
|
|
I915_READ(PORT_HOTPLUG_STAT);
|
|
}
|
|
|
|
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
|
|
gmbus_irq_handler(dev);
|
|
|
|
if (pm_iir)
|
|
gen6_rps_irq_handler(dev_priv, pm_iir);
|
|
|
|
I915_WRITE(GTIIR, gt_iir);
|
|
I915_WRITE(GEN6_PMIIR, pm_iir);
|
|
I915_WRITE(VLV_IIR, iir);
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
|
|
|
|
intel_hpd_irq_handler(dev, hotplug_trigger, hpd_ibx);
|
|
|
|
if (pch_iir & SDE_AUDIO_POWER_MASK) {
|
|
int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >>
|
|
SDE_AUDIO_POWER_SHIFT);
|
|
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
|
|
port_name(port));
|
|
}
|
|
|
|
if (pch_iir & SDE_AUX_MASK)
|
|
dp_aux_irq_handler(dev);
|
|
|
|
if (pch_iir & SDE_GMBUS)
|
|
gmbus_irq_handler(dev);
|
|
|
|
if (pch_iir & SDE_AUDIO_HDCP_MASK)
|
|
DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
|
|
|
|
if (pch_iir & SDE_AUDIO_TRANS_MASK)
|
|
DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
|
|
|
|
if (pch_iir & SDE_POISON)
|
|
DRM_ERROR("PCH poison interrupt\n");
|
|
|
|
if (pch_iir & SDE_FDI_MASK)
|
|
for_each_pipe(pipe)
|
|
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
|
|
pipe_name(pipe),
|
|
I915_READ(FDI_RX_IIR(pipe)));
|
|
|
|
if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
|
|
DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
|
|
|
|
if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
|
|
DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
|
|
|
|
if (pch_iir & SDE_TRANSA_FIFO_UNDER)
|
|
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A,
|
|
false))
|
|
DRM_DEBUG_DRIVER("PCH transcoder A FIFO underrun\n");
|
|
|
|
if (pch_iir & SDE_TRANSB_FIFO_UNDER)
|
|
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_B,
|
|
false))
|
|
DRM_DEBUG_DRIVER("PCH transcoder B FIFO underrun\n");
|
|
}
|
|
|
|
static void ivb_err_int_handler(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 err_int = I915_READ(GEN7_ERR_INT);
|
|
enum pipe pipe;
|
|
|
|
if (err_int & ERR_INT_POISON)
|
|
DRM_ERROR("Poison interrupt\n");
|
|
|
|
for_each_pipe(pipe) {
|
|
if (err_int & ERR_INT_FIFO_UNDERRUN(pipe)) {
|
|
if (intel_set_cpu_fifo_underrun_reporting(dev, pipe,
|
|
false))
|
|
DRM_DEBUG_DRIVER("Pipe %c FIFO underrun\n",
|
|
pipe_name(pipe));
|
|
}
|
|
|
|
if (err_int & ERR_INT_PIPE_CRC_DONE(pipe)) {
|
|
if (IS_IVYBRIDGE(dev))
|
|
ivb_pipe_crc_irq_handler(dev, pipe);
|
|
else
|
|
hsw_pipe_crc_irq_handler(dev, pipe);
|
|
}
|
|
}
|
|
|
|
I915_WRITE(GEN7_ERR_INT, err_int);
|
|
}
|
|
|
|
static void cpt_serr_int_handler(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 serr_int = I915_READ(SERR_INT);
|
|
|
|
if (serr_int & SERR_INT_POISON)
|
|
DRM_ERROR("PCH poison interrupt\n");
|
|
|
|
if (serr_int & SERR_INT_TRANS_A_FIFO_UNDERRUN)
|
|
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A,
|
|
false))
|
|
DRM_DEBUG_DRIVER("PCH transcoder A FIFO underrun\n");
|
|
|
|
if (serr_int & SERR_INT_TRANS_B_FIFO_UNDERRUN)
|
|
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_B,
|
|
false))
|
|
DRM_DEBUG_DRIVER("PCH transcoder B FIFO underrun\n");
|
|
|
|
if (serr_int & SERR_INT_TRANS_C_FIFO_UNDERRUN)
|
|
if (intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_C,
|
|
false))
|
|
DRM_DEBUG_DRIVER("PCH transcoder C FIFO underrun\n");
|
|
|
|
I915_WRITE(SERR_INT, serr_int);
|
|
}
|
|
|
|
static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
|
|
|
|
intel_hpd_irq_handler(dev, hotplug_trigger, hpd_cpt);
|
|
|
|
if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
|
|
int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
|
|
SDE_AUDIO_POWER_SHIFT_CPT);
|
|
DRM_DEBUG_DRIVER("PCH audio power change on port %c\n",
|
|
port_name(port));
|
|
}
|
|
|
|
if (pch_iir & SDE_AUX_MASK_CPT)
|
|
dp_aux_irq_handler(dev);
|
|
|
|
if (pch_iir & SDE_GMBUS_CPT)
|
|
gmbus_irq_handler(dev);
|
|
|
|
if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
|
|
DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
|
|
|
|
if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
|
|
DRM_DEBUG_DRIVER("Audio CP change interrupt\n");
|
|
|
|
if (pch_iir & SDE_FDI_MASK_CPT)
|
|
for_each_pipe(pipe)
|
|
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
|
|
pipe_name(pipe),
|
|
I915_READ(FDI_RX_IIR(pipe)));
|
|
|
|
if (pch_iir & SDE_ERROR_CPT)
|
|
cpt_serr_int_handler(dev);
|
|
}
|
|
|
|
static void ilk_display_irq_handler(struct drm_device *dev, u32 de_iir)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe;
|
|
|
|
if (de_iir & DE_AUX_CHANNEL_A)
|
|
dp_aux_irq_handler(dev);
|
|
|
|
if (de_iir & DE_GSE)
|
|
intel_opregion_asle_intr(dev);
|
|
|
|
if (de_iir & DE_POISON)
|
|
DRM_ERROR("Poison interrupt\n");
|
|
|
|
for_each_pipe(pipe) {
|
|
if (de_iir & DE_PIPE_VBLANK(pipe))
|
|
drm_handle_vblank(dev, pipe);
|
|
|
|
if (de_iir & DE_PIPE_FIFO_UNDERRUN(pipe))
|
|
if (intel_set_cpu_fifo_underrun_reporting(dev, pipe, false))
|
|
DRM_DEBUG_DRIVER("Pipe %c FIFO underrun\n",
|
|
pipe_name(pipe));
|
|
|
|
if (de_iir & DE_PIPE_CRC_DONE(pipe))
|
|
i9xx_pipe_crc_irq_handler(dev, pipe);
|
|
|
|
/* plane/pipes map 1:1 on ilk+ */
|
|
if (de_iir & DE_PLANE_FLIP_DONE(pipe)) {
|
|
intel_prepare_page_flip(dev, pipe);
|
|
intel_finish_page_flip_plane(dev, pipe);
|
|
}
|
|
}
|
|
|
|
/* check event from PCH */
|
|
if (de_iir & DE_PCH_EVENT) {
|
|
u32 pch_iir = I915_READ(SDEIIR);
|
|
|
|
if (HAS_PCH_CPT(dev))
|
|
cpt_irq_handler(dev, pch_iir);
|
|
else
|
|
ibx_irq_handler(dev, pch_iir);
|
|
|
|
/* should clear PCH hotplug event before clear CPU irq */
|
|
I915_WRITE(SDEIIR, pch_iir);
|
|
}
|
|
|
|
if (IS_GEN5(dev) && de_iir & DE_PCU_EVENT)
|
|
ironlake_rps_change_irq_handler(dev);
|
|
}
|
|
|
|
static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe i;
|
|
|
|
if (de_iir & DE_ERR_INT_IVB)
|
|
ivb_err_int_handler(dev);
|
|
|
|
if (de_iir & DE_AUX_CHANNEL_A_IVB)
|
|
dp_aux_irq_handler(dev);
|
|
|
|
if (de_iir & DE_GSE_IVB)
|
|
intel_opregion_asle_intr(dev);
|
|
|
|
for_each_pipe(i) {
|
|
if (de_iir & (DE_PIPE_VBLANK_IVB(i)))
|
|
drm_handle_vblank(dev, i);
|
|
|
|
/* plane/pipes map 1:1 on ilk+ */
|
|
if (de_iir & DE_PLANE_FLIP_DONE_IVB(i)) {
|
|
intel_prepare_page_flip(dev, i);
|
|
intel_finish_page_flip_plane(dev, i);
|
|
}
|
|
}
|
|
|
|
/* check event from PCH */
|
|
if (!HAS_PCH_NOP(dev) && (de_iir & DE_PCH_EVENT_IVB)) {
|
|
u32 pch_iir = I915_READ(SDEIIR);
|
|
|
|
cpt_irq_handler(dev, pch_iir);
|
|
|
|
/* clear PCH hotplug event before clear CPU irq */
|
|
I915_WRITE(SDEIIR, pch_iir);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t ironlake_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 de_iir, gt_iir, de_ier, sde_ier = 0;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
/* We get interrupts on unclaimed registers, so check for this before we
|
|
* do any I915_{READ,WRITE}. */
|
|
intel_uncore_check_errors(dev);
|
|
|
|
/* disable master interrupt before clearing iir */
|
|
de_ier = I915_READ(DEIER);
|
|
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
|
|
POSTING_READ(DEIER);
|
|
|
|
/* Disable south interrupts. We'll only write to SDEIIR once, so further
|
|
* interrupts will will be stored on its back queue, and then we'll be
|
|
* able to process them after we restore SDEIER (as soon as we restore
|
|
* it, we'll get an interrupt if SDEIIR still has something to process
|
|
* due to its back queue). */
|
|
if (!HAS_PCH_NOP(dev)) {
|
|
sde_ier = I915_READ(SDEIER);
|
|
I915_WRITE(SDEIER, 0);
|
|
POSTING_READ(SDEIER);
|
|
}
|
|
|
|
gt_iir = I915_READ(GTIIR);
|
|
if (gt_iir) {
|
|
if (INTEL_INFO(dev)->gen >= 6)
|
|
snb_gt_irq_handler(dev, dev_priv, gt_iir);
|
|
else
|
|
ilk_gt_irq_handler(dev, dev_priv, gt_iir);
|
|
I915_WRITE(GTIIR, gt_iir);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
de_iir = I915_READ(DEIIR);
|
|
if (de_iir) {
|
|
if (INTEL_INFO(dev)->gen >= 7)
|
|
ivb_display_irq_handler(dev, de_iir);
|
|
else
|
|
ilk_display_irq_handler(dev, de_iir);
|
|
I915_WRITE(DEIIR, de_iir);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen >= 6) {
|
|
u32 pm_iir = I915_READ(GEN6_PMIIR);
|
|
if (pm_iir) {
|
|
gen6_rps_irq_handler(dev_priv, pm_iir);
|
|
I915_WRITE(GEN6_PMIIR, pm_iir);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
I915_WRITE(DEIER, de_ier);
|
|
POSTING_READ(DEIER);
|
|
if (!HAS_PCH_NOP(dev)) {
|
|
I915_WRITE(SDEIER, sde_ier);
|
|
POSTING_READ(SDEIER);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t gen8_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = arg;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 master_ctl;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
uint32_t tmp = 0;
|
|
enum pipe pipe;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
master_ctl = I915_READ(GEN8_MASTER_IRQ);
|
|
master_ctl &= ~GEN8_MASTER_IRQ_CONTROL;
|
|
if (!master_ctl)
|
|
return IRQ_NONE;
|
|
|
|
I915_WRITE(GEN8_MASTER_IRQ, 0);
|
|
POSTING_READ(GEN8_MASTER_IRQ);
|
|
|
|
ret = gen8_gt_irq_handler(dev, dev_priv, master_ctl);
|
|
|
|
if (master_ctl & GEN8_DE_MISC_IRQ) {
|
|
tmp = I915_READ(GEN8_DE_MISC_IIR);
|
|
if (tmp & GEN8_DE_MISC_GSE)
|
|
intel_opregion_asle_intr(dev);
|
|
else if (tmp)
|
|
DRM_ERROR("Unexpected DE Misc interrupt\n");
|
|
else
|
|
DRM_ERROR("The master control interrupt lied (DE MISC)!\n");
|
|
|
|
if (tmp) {
|
|
I915_WRITE(GEN8_DE_MISC_IIR, tmp);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
if (master_ctl & GEN8_DE_PORT_IRQ) {
|
|
tmp = I915_READ(GEN8_DE_PORT_IIR);
|
|
if (tmp & GEN8_AUX_CHANNEL_A)
|
|
dp_aux_irq_handler(dev);
|
|
else if (tmp)
|
|
DRM_ERROR("Unexpected DE Port interrupt\n");
|
|
else
|
|
DRM_ERROR("The master control interrupt lied (DE PORT)!\n");
|
|
|
|
if (tmp) {
|
|
I915_WRITE(GEN8_DE_PORT_IIR, tmp);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
for_each_pipe(pipe) {
|
|
uint32_t pipe_iir;
|
|
|
|
if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe)))
|
|
continue;
|
|
|
|
pipe_iir = I915_READ(GEN8_DE_PIPE_IIR(pipe));
|
|
if (pipe_iir & GEN8_PIPE_VBLANK)
|
|
drm_handle_vblank(dev, pipe);
|
|
|
|
if (pipe_iir & GEN8_PIPE_FLIP_DONE) {
|
|
intel_prepare_page_flip(dev, pipe);
|
|
intel_finish_page_flip_plane(dev, pipe);
|
|
}
|
|
|
|
if (pipe_iir & GEN8_PIPE_CDCLK_CRC_DONE)
|
|
hsw_pipe_crc_irq_handler(dev, pipe);
|
|
|
|
if (pipe_iir & GEN8_PIPE_FIFO_UNDERRUN) {
|
|
if (intel_set_cpu_fifo_underrun_reporting(dev, pipe,
|
|
false))
|
|
DRM_DEBUG_DRIVER("Pipe %c FIFO underrun\n",
|
|
pipe_name(pipe));
|
|
}
|
|
|
|
if (pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS) {
|
|
DRM_ERROR("Fault errors on pipe %c\n: 0x%08x",
|
|
pipe_name(pipe),
|
|
pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS);
|
|
}
|
|
|
|
if (pipe_iir) {
|
|
ret = IRQ_HANDLED;
|
|
I915_WRITE(GEN8_DE_PIPE_IIR(pipe), pipe_iir);
|
|
} else
|
|
DRM_ERROR("The master control interrupt lied (DE PIPE)!\n");
|
|
}
|
|
|
|
if (!HAS_PCH_NOP(dev) && master_ctl & GEN8_DE_PCH_IRQ) {
|
|
/*
|
|
* FIXME(BDW): Assume for now that the new interrupt handling
|
|
* scheme also closed the SDE interrupt handling race we've seen
|
|
* on older pch-split platforms. But this needs testing.
|
|
*/
|
|
u32 pch_iir = I915_READ(SDEIIR);
|
|
|
|
cpt_irq_handler(dev, pch_iir);
|
|
|
|
if (pch_iir) {
|
|
I915_WRITE(SDEIIR, pch_iir);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL);
|
|
POSTING_READ(GEN8_MASTER_IRQ);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void i915_error_wake_up(struct drm_i915_private *dev_priv,
|
|
bool reset_completed)
|
|
{
|
|
struct intel_ring_buffer *ring;
|
|
int i;
|
|
|
|
/*
|
|
* Notify all waiters for GPU completion events that reset state has
|
|
* been changed, and that they need to restart their wait after
|
|
* checking for potential errors (and bail out to drop locks if there is
|
|
* a gpu reset pending so that i915_error_work_func can acquire them).
|
|
*/
|
|
|
|
/* Wake up __wait_seqno, potentially holding dev->struct_mutex. */
|
|
for_each_ring(ring, dev_priv, i)
|
|
wake_up_all(&ring->irq_queue);
|
|
|
|
/* Wake up intel_crtc_wait_for_pending_flips, holding crtc->mutex. */
|
|
wake_up_all(&dev_priv->pending_flip_queue);
|
|
|
|
/*
|
|
* Signal tasks blocked in i915_gem_wait_for_error that the pending
|
|
* reset state is cleared.
|
|
*/
|
|
if (reset_completed)
|
|
wake_up_all(&dev_priv->gpu_error.reset_queue);
|
|
}
|
|
|
|
/**
|
|
* i915_error_work_func - do process context error handling work
|
|
* @work: work struct
|
|
*
|
|
* Fire an error uevent so userspace can see that a hang or error
|
|
* was detected.
|
|
*/
|
|
static void i915_error_work_func(struct work_struct *work)
|
|
{
|
|
struct i915_gpu_error *error = container_of(work, struct i915_gpu_error,
|
|
work);
|
|
drm_i915_private_t *dev_priv = container_of(error, drm_i915_private_t,
|
|
gpu_error);
|
|
struct drm_device *dev = dev_priv->dev;
|
|
char *error_event[] = { I915_ERROR_UEVENT "=1", NULL };
|
|
char *reset_event[] = { I915_RESET_UEVENT "=1", NULL };
|
|
char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL };
|
|
int ret;
|
|
|
|
kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, error_event);
|
|
|
|
/*
|
|
* Note that there's only one work item which does gpu resets, so we
|
|
* need not worry about concurrent gpu resets potentially incrementing
|
|
* error->reset_counter twice. We only need to take care of another
|
|
* racing irq/hangcheck declaring the gpu dead for a second time. A
|
|
* quick check for that is good enough: schedule_work ensures the
|
|
* correct ordering between hang detection and this work item, and since
|
|
* the reset in-progress bit is only ever set by code outside of this
|
|
* work we don't need to worry about any other races.
|
|
*/
|
|
if (i915_reset_in_progress(error) && !i915_terminally_wedged(error)) {
|
|
DRM_DEBUG_DRIVER("resetting chip\n");
|
|
kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE,
|
|
reset_event);
|
|
|
|
/*
|
|
* All state reset _must_ be completed before we update the
|
|
* reset counter, for otherwise waiters might miss the reset
|
|
* pending state and not properly drop locks, resulting in
|
|
* deadlocks with the reset work.
|
|
*/
|
|
ret = i915_reset(dev);
|
|
|
|
intel_display_handle_reset(dev);
|
|
|
|
if (ret == 0) {
|
|
/*
|
|
* After all the gem state is reset, increment the reset
|
|
* counter and wake up everyone waiting for the reset to
|
|
* complete.
|
|
*
|
|
* Since unlock operations are a one-sided barrier only,
|
|
* we need to insert a barrier here to order any seqno
|
|
* updates before
|
|
* the counter increment.
|
|
*/
|
|
smp_mb__before_atomic_inc();
|
|
atomic_inc(&dev_priv->gpu_error.reset_counter);
|
|
|
|
kobject_uevent_env(&dev->primary->kdev->kobj,
|
|
KOBJ_CHANGE, reset_done_event);
|
|
} else {
|
|
atomic_set(&error->reset_counter, I915_WEDGED);
|
|
}
|
|
|
|
/*
|
|
* Note: The wake_up also serves as a memory barrier so that
|
|
* waiters see the update value of the reset counter atomic_t.
|
|
*/
|
|
i915_error_wake_up(dev_priv, true);
|
|
}
|
|
}
|
|
|
|
static void i915_report_and_clear_eir(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t instdone[I915_NUM_INSTDONE_REG];
|
|
u32 eir = I915_READ(EIR);
|
|
int pipe, i;
|
|
|
|
if (!eir)
|
|
return;
|
|
|
|
pr_err("render error detected, EIR: 0x%08x\n", eir);
|
|
|
|
i915_get_extra_instdone(dev, instdone);
|
|
|
|
if (IS_G4X(dev)) {
|
|
if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
|
|
u32 ipeir = I915_READ(IPEIR_I965);
|
|
|
|
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
|
|
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
|
|
for (i = 0; i < ARRAY_SIZE(instdone); i++)
|
|
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
|
|
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
|
|
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
|
|
I915_WRITE(IPEIR_I965, ipeir);
|
|
POSTING_READ(IPEIR_I965);
|
|
}
|
|
if (eir & GM45_ERROR_PAGE_TABLE) {
|
|
u32 pgtbl_err = I915_READ(PGTBL_ER);
|
|
pr_err("page table error\n");
|
|
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
|
|
I915_WRITE(PGTBL_ER, pgtbl_err);
|
|
POSTING_READ(PGTBL_ER);
|
|
}
|
|
}
|
|
|
|
if (!IS_GEN2(dev)) {
|
|
if (eir & I915_ERROR_PAGE_TABLE) {
|
|
u32 pgtbl_err = I915_READ(PGTBL_ER);
|
|
pr_err("page table error\n");
|
|
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
|
|
I915_WRITE(PGTBL_ER, pgtbl_err);
|
|
POSTING_READ(PGTBL_ER);
|
|
}
|
|
}
|
|
|
|
if (eir & I915_ERROR_MEMORY_REFRESH) {
|
|
pr_err("memory refresh error:\n");
|
|
for_each_pipe(pipe)
|
|
pr_err("pipe %c stat: 0x%08x\n",
|
|
pipe_name(pipe), I915_READ(PIPESTAT(pipe)));
|
|
/* pipestat has already been acked */
|
|
}
|
|
if (eir & I915_ERROR_INSTRUCTION) {
|
|
pr_err("instruction error\n");
|
|
pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM));
|
|
for (i = 0; i < ARRAY_SIZE(instdone); i++)
|
|
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
|
|
if (INTEL_INFO(dev)->gen < 4) {
|
|
u32 ipeir = I915_READ(IPEIR);
|
|
|
|
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR));
|
|
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR));
|
|
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD));
|
|
I915_WRITE(IPEIR, ipeir);
|
|
POSTING_READ(IPEIR);
|
|
} else {
|
|
u32 ipeir = I915_READ(IPEIR_I965);
|
|
|
|
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
|
|
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
|
|
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
|
|
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
|
|
I915_WRITE(IPEIR_I965, ipeir);
|
|
POSTING_READ(IPEIR_I965);
|
|
}
|
|
}
|
|
|
|
I915_WRITE(EIR, eir);
|
|
POSTING_READ(EIR);
|
|
eir = I915_READ(EIR);
|
|
if (eir) {
|
|
/*
|
|
* some errors might have become stuck,
|
|
* mask them.
|
|
*/
|
|
DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
|
|
I915_WRITE(EMR, I915_READ(EMR) | eir);
|
|
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i915_handle_error - handle an error interrupt
|
|
* @dev: drm device
|
|
*
|
|
* Do some basic checking of regsiter state at error interrupt time and
|
|
* dump it to the syslog. Also call i915_capture_error_state() to make
|
|
* sure we get a record and make it available in debugfs. Fire a uevent
|
|
* so userspace knows something bad happened (should trigger collection
|
|
* of a ring dump etc.).
|
|
*/
|
|
void i915_handle_error(struct drm_device *dev, bool wedged)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
i915_capture_error_state(dev);
|
|
i915_report_and_clear_eir(dev);
|
|
|
|
if (wedged) {
|
|
atomic_set_mask(I915_RESET_IN_PROGRESS_FLAG,
|
|
&dev_priv->gpu_error.reset_counter);
|
|
|
|
/*
|
|
* Wakeup waiting processes so that the reset work function
|
|
* i915_error_work_func doesn't deadlock trying to grab various
|
|
* locks. By bumping the reset counter first, the woken
|
|
* processes will see a reset in progress and back off,
|
|
* releasing their locks and then wait for the reset completion.
|
|
* We must do this for _all_ gpu waiters that might hold locks
|
|
* that the reset work needs to acquire.
|
|
*
|
|
* Note: The wake_up serves as the required memory barrier to
|
|
* ensure that the waiters see the updated value of the reset
|
|
* counter atomic_t.
|
|
*/
|
|
i915_error_wake_up(dev_priv, false);
|
|
}
|
|
|
|
/*
|
|
* Our reset work can grab modeset locks (since it needs to reset the
|
|
* state of outstanding pagelips). Hence it must not be run on our own
|
|
* dev-priv->wq work queue for otherwise the flush_work in the pageflip
|
|
* code will deadlock.
|
|
*/
|
|
schedule_work(&dev_priv->gpu_error.work);
|
|
}
|
|
|
|
static void __always_unused i915_pageflip_stall_check(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_i915_gem_object *obj;
|
|
struct intel_unpin_work *work;
|
|
unsigned long flags;
|
|
bool stall_detected;
|
|
|
|
/* Ignore early vblank irqs */
|
|
if (intel_crtc == NULL)
|
|
return;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
work = intel_crtc->unpin_work;
|
|
|
|
if (work == NULL ||
|
|
atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE ||
|
|
!work->enable_stall_check) {
|
|
/* Either the pending flip IRQ arrived, or we're too early. Don't check */
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Potential stall - if we see that the flip has happened, assume a missed interrupt */
|
|
obj = work->pending_flip_obj;
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
int dspsurf = DSPSURF(intel_crtc->plane);
|
|
stall_detected = I915_HI_DISPBASE(I915_READ(dspsurf)) ==
|
|
i915_gem_obj_ggtt_offset(obj);
|
|
} else {
|
|
int dspaddr = DSPADDR(intel_crtc->plane);
|
|
stall_detected = I915_READ(dspaddr) == (i915_gem_obj_ggtt_offset(obj) +
|
|
crtc->y * crtc->fb->pitches[0] +
|
|
crtc->x * crtc->fb->bits_per_pixel/8);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
if (stall_detected) {
|
|
DRM_DEBUG_DRIVER("Pageflip stall detected\n");
|
|
intel_prepare_page_flip(dev, intel_crtc->plane);
|
|
}
|
|
}
|
|
|
|
/* Called from drm generic code, passed 'crtc' which
|
|
* we use as a pipe index
|
|
*/
|
|
static int i915_enable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
i915_enable_pipestat(dev_priv, pipe,
|
|
PIPE_START_VBLANK_INTERRUPT_ENABLE);
|
|
else
|
|
i915_enable_pipestat(dev_priv, pipe,
|
|
PIPE_VBLANK_INTERRUPT_ENABLE);
|
|
|
|
/* maintain vblank delivery even in deep C-states */
|
|
if (dev_priv->info->gen == 3)
|
|
I915_WRITE(INSTPM, _MASKED_BIT_DISABLE(INSTPM_AGPBUSY_DIS));
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ironlake_enable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
uint32_t bit = (INTEL_INFO(dev)->gen >= 7) ? DE_PIPE_VBLANK_IVB(pipe) :
|
|
DE_PIPE_VBLANK(pipe);
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
ironlake_enable_display_irq(dev_priv, bit);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int valleyview_enable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
u32 imr;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
imr = I915_READ(VLV_IMR);
|
|
if (pipe == PIPE_A)
|
|
imr &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
|
|
else
|
|
imr &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
I915_WRITE(VLV_IMR, imr);
|
|
i915_enable_pipestat(dev_priv, pipe,
|
|
PIPE_START_VBLANK_INTERRUPT_ENABLE);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gen8_enable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
dev_priv->de_irq_mask[pipe] &= ~GEN8_PIPE_VBLANK;
|
|
I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
|
|
POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
return 0;
|
|
}
|
|
|
|
/* Called from drm generic code, passed 'crtc' which
|
|
* we use as a pipe index
|
|
*/
|
|
static void i915_disable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (dev_priv->info->gen == 3)
|
|
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_DIS));
|
|
|
|
i915_disable_pipestat(dev_priv, pipe,
|
|
PIPE_VBLANK_INTERRUPT_ENABLE |
|
|
PIPE_START_VBLANK_INTERRUPT_ENABLE);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
static void ironlake_disable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
uint32_t bit = (INTEL_INFO(dev)->gen >= 7) ? DE_PIPE_VBLANK_IVB(pipe) :
|
|
DE_PIPE_VBLANK(pipe);
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
ironlake_disable_display_irq(dev_priv, bit);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
u32 imr;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
i915_disable_pipestat(dev_priv, pipe,
|
|
PIPE_START_VBLANK_INTERRUPT_ENABLE);
|
|
imr = I915_READ(VLV_IMR);
|
|
if (pipe == PIPE_A)
|
|
imr |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
|
|
else
|
|
imr |= I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
I915_WRITE(VLV_IMR, imr);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
static void gen8_disable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
dev_priv->de_irq_mask[pipe] |= GEN8_PIPE_VBLANK;
|
|
I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
|
|
POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
static u32
|
|
ring_last_seqno(struct intel_ring_buffer *ring)
|
|
{
|
|
return list_entry(ring->request_list.prev,
|
|
struct drm_i915_gem_request, list)->seqno;
|
|
}
|
|
|
|
static bool
|
|
ring_idle(struct intel_ring_buffer *ring, u32 seqno)
|
|
{
|
|
return (list_empty(&ring->request_list) ||
|
|
i915_seqno_passed(seqno, ring_last_seqno(ring)));
|
|
}
|
|
|
|
static struct intel_ring_buffer *
|
|
semaphore_waits_for(struct intel_ring_buffer *ring, u32 *seqno)
|
|
{
|
|
struct drm_i915_private *dev_priv = ring->dev->dev_private;
|
|
u32 cmd, ipehr, acthd, acthd_min;
|
|
|
|
ipehr = I915_READ(RING_IPEHR(ring->mmio_base));
|
|
if ((ipehr & ~(0x3 << 16)) !=
|
|
(MI_SEMAPHORE_MBOX | MI_SEMAPHORE_COMPARE | MI_SEMAPHORE_REGISTER))
|
|
return NULL;
|
|
|
|
/* ACTHD is likely pointing to the dword after the actual command,
|
|
* so scan backwards until we find the MBOX.
|
|
*/
|
|
acthd = intel_ring_get_active_head(ring) & HEAD_ADDR;
|
|
acthd_min = max((int)acthd - 3 * 4, 0);
|
|
do {
|
|
cmd = ioread32(ring->virtual_start + acthd);
|
|
if (cmd == ipehr)
|
|
break;
|
|
|
|
acthd -= 4;
|
|
if (acthd < acthd_min)
|
|
return NULL;
|
|
} while (1);
|
|
|
|
*seqno = ioread32(ring->virtual_start+acthd+4)+1;
|
|
return &dev_priv->ring[(ring->id + (((ipehr >> 17) & 1) + 1)) % 3];
|
|
}
|
|
|
|
static int semaphore_passed(struct intel_ring_buffer *ring)
|
|
{
|
|
struct drm_i915_private *dev_priv = ring->dev->dev_private;
|
|
struct intel_ring_buffer *signaller;
|
|
u32 seqno, ctl;
|
|
|
|
ring->hangcheck.deadlock = true;
|
|
|
|
signaller = semaphore_waits_for(ring, &seqno);
|
|
if (signaller == NULL || signaller->hangcheck.deadlock)
|
|
return -1;
|
|
|
|
/* cursory check for an unkickable deadlock */
|
|
ctl = I915_READ_CTL(signaller);
|
|
if (ctl & RING_WAIT_SEMAPHORE && semaphore_passed(signaller) < 0)
|
|
return -1;
|
|
|
|
return i915_seqno_passed(signaller->get_seqno(signaller, false), seqno);
|
|
}
|
|
|
|
static void semaphore_clear_deadlocks(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_ring_buffer *ring;
|
|
int i;
|
|
|
|
for_each_ring(ring, dev_priv, i)
|
|
ring->hangcheck.deadlock = false;
|
|
}
|
|
|
|
static enum intel_ring_hangcheck_action
|
|
ring_stuck(struct intel_ring_buffer *ring, u32 acthd)
|
|
{
|
|
struct drm_device *dev = ring->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 tmp;
|
|
|
|
if (ring->hangcheck.acthd != acthd)
|
|
return HANGCHECK_ACTIVE;
|
|
|
|
if (IS_GEN2(dev))
|
|
return HANGCHECK_HUNG;
|
|
|
|
/* Is the chip hanging on a WAIT_FOR_EVENT?
|
|
* If so we can simply poke the RB_WAIT bit
|
|
* and break the hang. This should work on
|
|
* all but the second generation chipsets.
|
|
*/
|
|
tmp = I915_READ_CTL(ring);
|
|
if (tmp & RING_WAIT) {
|
|
DRM_ERROR("Kicking stuck wait on %s\n",
|
|
ring->name);
|
|
i915_handle_error(dev, false);
|
|
I915_WRITE_CTL(ring, tmp);
|
|
return HANGCHECK_KICK;
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen >= 6 && tmp & RING_WAIT_SEMAPHORE) {
|
|
switch (semaphore_passed(ring)) {
|
|
default:
|
|
return HANGCHECK_HUNG;
|
|
case 1:
|
|
DRM_ERROR("Kicking stuck semaphore on %s\n",
|
|
ring->name);
|
|
i915_handle_error(dev, false);
|
|
I915_WRITE_CTL(ring, tmp);
|
|
return HANGCHECK_KICK;
|
|
case 0:
|
|
return HANGCHECK_WAIT;
|
|
}
|
|
}
|
|
|
|
return HANGCHECK_HUNG;
|
|
}
|
|
|
|
/**
|
|
* This is called when the chip hasn't reported back with completed
|
|
* batchbuffers in a long time. We keep track per ring seqno progress and
|
|
* if there are no progress, hangcheck score for that ring is increased.
|
|
* Further, acthd is inspected to see if the ring is stuck. On stuck case
|
|
* we kick the ring. If we see no progress on three subsequent calls
|
|
* we assume chip is wedged and try to fix it by resetting the chip.
|
|
*/
|
|
static void i915_hangcheck_elapsed(unsigned long data)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *)data;
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct intel_ring_buffer *ring;
|
|
int i;
|
|
int busy_count = 0, rings_hung = 0;
|
|
bool stuck[I915_NUM_RINGS] = { 0 };
|
|
#define BUSY 1
|
|
#define KICK 5
|
|
#define HUNG 20
|
|
#define FIRE 30
|
|
|
|
if (!i915_enable_hangcheck)
|
|
return;
|
|
|
|
for_each_ring(ring, dev_priv, i) {
|
|
u32 seqno, acthd;
|
|
bool busy = true;
|
|
|
|
semaphore_clear_deadlocks(dev_priv);
|
|
|
|
seqno = ring->get_seqno(ring, false);
|
|
acthd = intel_ring_get_active_head(ring);
|
|
|
|
if (ring->hangcheck.seqno == seqno) {
|
|
if (ring_idle(ring, seqno)) {
|
|
ring->hangcheck.action = HANGCHECK_IDLE;
|
|
|
|
if (waitqueue_active(&ring->irq_queue)) {
|
|
/* Issue a wake-up to catch stuck h/w. */
|
|
if (!test_and_set_bit(ring->id, &dev_priv->gpu_error.missed_irq_rings)) {
|
|
if (!(dev_priv->gpu_error.test_irq_rings & intel_ring_flag(ring)))
|
|
DRM_ERROR("Hangcheck timer elapsed... %s idle\n",
|
|
ring->name);
|
|
else
|
|
DRM_INFO("Fake missed irq on %s\n",
|
|
ring->name);
|
|
wake_up_all(&ring->irq_queue);
|
|
}
|
|
/* Safeguard against driver failure */
|
|
ring->hangcheck.score += BUSY;
|
|
} else
|
|
busy = false;
|
|
} else {
|
|
/* We always increment the hangcheck score
|
|
* if the ring is busy and still processing
|
|
* the same request, so that no single request
|
|
* can run indefinitely (such as a chain of
|
|
* batches). The only time we do not increment
|
|
* the hangcheck score on this ring, if this
|
|
* ring is in a legitimate wait for another
|
|
* ring. In that case the waiting ring is a
|
|
* victim and we want to be sure we catch the
|
|
* right culprit. Then every time we do kick
|
|
* the ring, add a small increment to the
|
|
* score so that we can catch a batch that is
|
|
* being repeatedly kicked and so responsible
|
|
* for stalling the machine.
|
|
*/
|
|
ring->hangcheck.action = ring_stuck(ring,
|
|
acthd);
|
|
|
|
switch (ring->hangcheck.action) {
|
|
case HANGCHECK_IDLE:
|
|
case HANGCHECK_WAIT:
|
|
break;
|
|
case HANGCHECK_ACTIVE:
|
|
ring->hangcheck.score += BUSY;
|
|
break;
|
|
case HANGCHECK_KICK:
|
|
ring->hangcheck.score += KICK;
|
|
break;
|
|
case HANGCHECK_HUNG:
|
|
ring->hangcheck.score += HUNG;
|
|
stuck[i] = true;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
ring->hangcheck.action = HANGCHECK_ACTIVE;
|
|
|
|
/* Gradually reduce the count so that we catch DoS
|
|
* attempts across multiple batches.
|
|
*/
|
|
if (ring->hangcheck.score > 0)
|
|
ring->hangcheck.score--;
|
|
}
|
|
|
|
ring->hangcheck.seqno = seqno;
|
|
ring->hangcheck.acthd = acthd;
|
|
busy_count += busy;
|
|
}
|
|
|
|
for_each_ring(ring, dev_priv, i) {
|
|
if (ring->hangcheck.score > FIRE) {
|
|
DRM_INFO("%s on %s\n",
|
|
stuck[i] ? "stuck" : "no progress",
|
|
ring->name);
|
|
rings_hung++;
|
|
}
|
|
}
|
|
|
|
if (rings_hung)
|
|
return i915_handle_error(dev, true);
|
|
|
|
if (busy_count)
|
|
/* Reset timer case chip hangs without another request
|
|
* being added */
|
|
i915_queue_hangcheck(dev);
|
|
}
|
|
|
|
void i915_queue_hangcheck(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
if (!i915_enable_hangcheck)
|
|
return;
|
|
|
|
mod_timer(&dev_priv->gpu_error.hangcheck_timer,
|
|
round_jiffies_up(jiffies + DRM_I915_HANGCHECK_JIFFIES));
|
|
}
|
|
|
|
static void ibx_irq_preinstall(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (HAS_PCH_NOP(dev))
|
|
return;
|
|
|
|
/* south display irq */
|
|
I915_WRITE(SDEIMR, 0xffffffff);
|
|
/*
|
|
* SDEIER is also touched by the interrupt handler to work around missed
|
|
* PCH interrupts. Hence we can't update it after the interrupt handler
|
|
* is enabled - instead we unconditionally enable all PCH interrupt
|
|
* sources here, but then only unmask them as needed with SDEIMR.
|
|
*/
|
|
I915_WRITE(SDEIER, 0xffffffff);
|
|
POSTING_READ(SDEIER);
|
|
}
|
|
|
|
static void gen5_gt_irq_preinstall(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/* and GT */
|
|
I915_WRITE(GTIMR, 0xffffffff);
|
|
I915_WRITE(GTIER, 0x0);
|
|
POSTING_READ(GTIER);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 6) {
|
|
/* and PM */
|
|
I915_WRITE(GEN6_PMIMR, 0xffffffff);
|
|
I915_WRITE(GEN6_PMIER, 0x0);
|
|
POSTING_READ(GEN6_PMIER);
|
|
}
|
|
}
|
|
|
|
/* drm_dma.h hooks
|
|
*/
|
|
static void ironlake_irq_preinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
I915_WRITE(HWSTAM, 0xeffe);
|
|
|
|
I915_WRITE(DEIMR, 0xffffffff);
|
|
I915_WRITE(DEIER, 0x0);
|
|
POSTING_READ(DEIER);
|
|
|
|
gen5_gt_irq_preinstall(dev);
|
|
|
|
ibx_irq_preinstall(dev);
|
|
}
|
|
|
|
static void valleyview_irq_preinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
/* VLV magic */
|
|
I915_WRITE(VLV_IMR, 0);
|
|
I915_WRITE(RING_IMR(RENDER_RING_BASE), 0);
|
|
I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0);
|
|
I915_WRITE(RING_IMR(BLT_RING_BASE), 0);
|
|
|
|
/* and GT */
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
|
|
gen5_gt_irq_preinstall(dev);
|
|
|
|
I915_WRITE(DPINVGTT, 0xff);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0xffff);
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
I915_WRITE(VLV_IMR, 0xffffffff);
|
|
I915_WRITE(VLV_IER, 0x0);
|
|
POSTING_READ(VLV_IER);
|
|
}
|
|
|
|
static void gen8_irq_preinstall(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
I915_WRITE(GEN8_MASTER_IRQ, 0);
|
|
POSTING_READ(GEN8_MASTER_IRQ);
|
|
|
|
/* IIR can theoretically queue up two events. Be paranoid */
|
|
#define GEN8_IRQ_INIT_NDX(type, which) do { \
|
|
I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \
|
|
POSTING_READ(GEN8_##type##_IMR(which)); \
|
|
I915_WRITE(GEN8_##type##_IER(which), 0); \
|
|
I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
|
|
POSTING_READ(GEN8_##type##_IIR(which)); \
|
|
I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
|
|
} while (0)
|
|
|
|
#define GEN8_IRQ_INIT(type) do { \
|
|
I915_WRITE(GEN8_##type##_IMR, 0xffffffff); \
|
|
POSTING_READ(GEN8_##type##_IMR); \
|
|
I915_WRITE(GEN8_##type##_IER, 0); \
|
|
I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \
|
|
POSTING_READ(GEN8_##type##_IIR); \
|
|
I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \
|
|
} while (0)
|
|
|
|
GEN8_IRQ_INIT_NDX(GT, 0);
|
|
GEN8_IRQ_INIT_NDX(GT, 1);
|
|
GEN8_IRQ_INIT_NDX(GT, 2);
|
|
GEN8_IRQ_INIT_NDX(GT, 3);
|
|
|
|
for_each_pipe(pipe) {
|
|
GEN8_IRQ_INIT_NDX(DE_PIPE, pipe);
|
|
}
|
|
|
|
GEN8_IRQ_INIT(DE_PORT);
|
|
GEN8_IRQ_INIT(DE_MISC);
|
|
GEN8_IRQ_INIT(PCU);
|
|
#undef GEN8_IRQ_INIT
|
|
#undef GEN8_IRQ_INIT_NDX
|
|
|
|
POSTING_READ(GEN8_PCU_IIR);
|
|
}
|
|
|
|
static void ibx_hpd_irq_setup(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *intel_encoder;
|
|
u32 hotplug_irqs, hotplug, enabled_irqs = 0;
|
|
|
|
if (HAS_PCH_IBX(dev)) {
|
|
hotplug_irqs = SDE_HOTPLUG_MASK;
|
|
list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
|
|
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
|
|
enabled_irqs |= hpd_ibx[intel_encoder->hpd_pin];
|
|
} else {
|
|
hotplug_irqs = SDE_HOTPLUG_MASK_CPT;
|
|
list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
|
|
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
|
|
enabled_irqs |= hpd_cpt[intel_encoder->hpd_pin];
|
|
}
|
|
|
|
ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs);
|
|
|
|
/*
|
|
* Enable digital hotplug on the PCH, and configure the DP short pulse
|
|
* duration to 2ms (which is the minimum in the Display Port spec)
|
|
*
|
|
* This register is the same on all known PCH chips.
|
|
*/
|
|
hotplug = I915_READ(PCH_PORT_HOTPLUG);
|
|
hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK);
|
|
hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms;
|
|
hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms;
|
|
hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms;
|
|
I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
|
|
}
|
|
|
|
static void ibx_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 mask;
|
|
|
|
if (HAS_PCH_NOP(dev))
|
|
return;
|
|
|
|
if (HAS_PCH_IBX(dev)) {
|
|
mask = SDE_GMBUS | SDE_AUX_MASK | SDE_TRANSB_FIFO_UNDER |
|
|
SDE_TRANSA_FIFO_UNDER | SDE_POISON;
|
|
} else {
|
|
mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT | SDE_ERROR_CPT;
|
|
|
|
I915_WRITE(SERR_INT, I915_READ(SERR_INT));
|
|
}
|
|
|
|
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
|
|
I915_WRITE(SDEIMR, ~mask);
|
|
}
|
|
|
|
static void gen5_gt_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 pm_irqs, gt_irqs;
|
|
|
|
pm_irqs = gt_irqs = 0;
|
|
|
|
dev_priv->gt_irq_mask = ~0;
|
|
if (HAS_L3_DPF(dev)) {
|
|
/* L3 parity interrupt is always unmasked. */
|
|
dev_priv->gt_irq_mask = ~GT_PARITY_ERROR(dev);
|
|
gt_irqs |= GT_PARITY_ERROR(dev);
|
|
}
|
|
|
|
gt_irqs |= GT_RENDER_USER_INTERRUPT;
|
|
if (IS_GEN5(dev)) {
|
|
gt_irqs |= GT_RENDER_PIPECTL_NOTIFY_INTERRUPT |
|
|
ILK_BSD_USER_INTERRUPT;
|
|
} else {
|
|
gt_irqs |= GT_BLT_USER_INTERRUPT | GT_BSD_USER_INTERRUPT;
|
|
}
|
|
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
|
|
I915_WRITE(GTIER, gt_irqs);
|
|
POSTING_READ(GTIER);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 6) {
|
|
pm_irqs |= GEN6_PM_RPS_EVENTS;
|
|
|
|
if (HAS_VEBOX(dev))
|
|
pm_irqs |= PM_VEBOX_USER_INTERRUPT;
|
|
|
|
dev_priv->pm_irq_mask = 0xffffffff;
|
|
I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
|
|
I915_WRITE(GEN6_PMIMR, dev_priv->pm_irq_mask);
|
|
I915_WRITE(GEN6_PMIER, pm_irqs);
|
|
POSTING_READ(GEN6_PMIER);
|
|
}
|
|
}
|
|
|
|
static int ironlake_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
unsigned long irqflags;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 display_mask, extra_mask;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 7) {
|
|
display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB |
|
|
DE_PCH_EVENT_IVB | DE_PLANEC_FLIP_DONE_IVB |
|
|
DE_PLANEB_FLIP_DONE_IVB |
|
|
DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB |
|
|
DE_ERR_INT_IVB);
|
|
extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB |
|
|
DE_PIPEA_VBLANK_IVB);
|
|
|
|
I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT));
|
|
} else {
|
|
display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
|
|
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
|
|
DE_AUX_CHANNEL_A |
|
|
DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN |
|
|
DE_PIPEB_CRC_DONE | DE_PIPEA_CRC_DONE |
|
|
DE_POISON);
|
|
extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT;
|
|
}
|
|
|
|
dev_priv->irq_mask = ~display_mask;
|
|
|
|
/* should always can generate irq */
|
|
I915_WRITE(DEIIR, I915_READ(DEIIR));
|
|
I915_WRITE(DEIMR, dev_priv->irq_mask);
|
|
I915_WRITE(DEIER, display_mask | extra_mask);
|
|
POSTING_READ(DEIER);
|
|
|
|
gen5_gt_irq_postinstall(dev);
|
|
|
|
ibx_irq_postinstall(dev);
|
|
|
|
if (IS_IRONLAKE_M(dev)) {
|
|
/* Enable PCU event interrupts
|
|
*
|
|
* spinlocking not required here for correctness since interrupt
|
|
* setup is guaranteed to run in single-threaded context. But we
|
|
* need it to make the assert_spin_locked happy. */
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int valleyview_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 enable_mask;
|
|
u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV |
|
|
PIPE_CRC_DONE_ENABLE;
|
|
unsigned long irqflags;
|
|
|
|
enable_mask = I915_DISPLAY_PORT_INTERRUPT;
|
|
enable_mask |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
|
|
/*
|
|
*Leave vblank interrupts masked initially. enable/disable will
|
|
* toggle them based on usage.
|
|
*/
|
|
dev_priv->irq_mask = (~enable_mask) |
|
|
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
POSTING_READ(PORT_HOTPLUG_EN);
|
|
|
|
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
|
|
I915_WRITE(VLV_IER, enable_mask);
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
I915_WRITE(PIPESTAT(0), 0xffff);
|
|
I915_WRITE(PIPESTAT(1), 0xffff);
|
|
POSTING_READ(VLV_IER);
|
|
|
|
/* Interrupt setup is already guaranteed to be single-threaded, this is
|
|
* just to make the assert_spin_locked check happy. */
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
i915_enable_pipestat(dev_priv, PIPE_A, pipestat_enable);
|
|
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_EVENT_ENABLE);
|
|
i915_enable_pipestat(dev_priv, PIPE_B, pipestat_enable);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
|
|
gen5_gt_irq_postinstall(dev);
|
|
|
|
/* ack & enable invalid PTE error interrupts */
|
|
#if 0 /* FIXME: add support to irq handler for checking these bits */
|
|
I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK);
|
|
I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK);
|
|
#endif
|
|
|
|
I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv)
|
|
{
|
|
int i;
|
|
|
|
/* These are interrupts we'll toggle with the ring mask register */
|
|
uint32_t gt_interrupts[] = {
|
|
GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT |
|
|
GT_RENDER_L3_PARITY_ERROR_INTERRUPT |
|
|
GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT,
|
|
GT_RENDER_USER_INTERRUPT << GEN8_VCS1_IRQ_SHIFT |
|
|
GT_RENDER_USER_INTERRUPT << GEN8_VCS2_IRQ_SHIFT,
|
|
0,
|
|
GT_RENDER_USER_INTERRUPT << GEN8_VECS_IRQ_SHIFT
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(gt_interrupts); i++) {
|
|
u32 tmp = I915_READ(GEN8_GT_IIR(i));
|
|
if (tmp)
|
|
DRM_ERROR("Interrupt (%d) should have been masked in pre-install 0x%08x\n",
|
|
i, tmp);
|
|
I915_WRITE(GEN8_GT_IMR(i), ~gt_interrupts[i]);
|
|
I915_WRITE(GEN8_GT_IER(i), gt_interrupts[i]);
|
|
}
|
|
POSTING_READ(GEN8_GT_IER(0));
|
|
}
|
|
|
|
static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
uint32_t de_pipe_masked = GEN8_PIPE_FLIP_DONE |
|
|
GEN8_PIPE_CDCLK_CRC_DONE |
|
|
GEN8_PIPE_FIFO_UNDERRUN |
|
|
GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
|
|
uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK;
|
|
int pipe;
|
|
dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked;
|
|
dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;
|
|
dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked;
|
|
|
|
for_each_pipe(pipe) {
|
|
u32 tmp = I915_READ(GEN8_DE_PIPE_IIR(pipe));
|
|
if (tmp)
|
|
DRM_ERROR("Interrupt (%d) should have been masked in pre-install 0x%08x\n",
|
|
pipe, tmp);
|
|
I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
|
|
I915_WRITE(GEN8_DE_PIPE_IER(pipe), de_pipe_enables);
|
|
}
|
|
POSTING_READ(GEN8_DE_PIPE_ISR(0));
|
|
|
|
I915_WRITE(GEN8_DE_PORT_IMR, ~GEN8_AUX_CHANNEL_A);
|
|
I915_WRITE(GEN8_DE_PORT_IER, GEN8_AUX_CHANNEL_A);
|
|
POSTING_READ(GEN8_DE_PORT_IER);
|
|
}
|
|
|
|
static int gen8_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
gen8_gt_irq_postinstall(dev_priv);
|
|
gen8_de_irq_postinstall(dev_priv);
|
|
|
|
ibx_irq_postinstall(dev);
|
|
|
|
I915_WRITE(GEN8_MASTER_IRQ, DE_MASTER_IRQ_CONTROL);
|
|
POSTING_READ(GEN8_MASTER_IRQ);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gen8_irq_uninstall(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe;
|
|
|
|
if (!dev_priv)
|
|
return;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
I915_WRITE(GEN8_MASTER_IRQ, 0);
|
|
|
|
#define GEN8_IRQ_FINI_NDX(type, which) do { \
|
|
I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \
|
|
I915_WRITE(GEN8_##type##_IER(which), 0); \
|
|
I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
|
|
} while (0)
|
|
|
|
#define GEN8_IRQ_FINI(type) do { \
|
|
I915_WRITE(GEN8_##type##_IMR, 0xffffffff); \
|
|
I915_WRITE(GEN8_##type##_IER, 0); \
|
|
I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \
|
|
} while (0)
|
|
|
|
GEN8_IRQ_FINI_NDX(GT, 0);
|
|
GEN8_IRQ_FINI_NDX(GT, 1);
|
|
GEN8_IRQ_FINI_NDX(GT, 2);
|
|
GEN8_IRQ_FINI_NDX(GT, 3);
|
|
|
|
for_each_pipe(pipe) {
|
|
GEN8_IRQ_FINI_NDX(DE_PIPE, pipe);
|
|
}
|
|
|
|
GEN8_IRQ_FINI(DE_PORT);
|
|
GEN8_IRQ_FINI(DE_MISC);
|
|
GEN8_IRQ_FINI(PCU);
|
|
#undef GEN8_IRQ_FINI
|
|
#undef GEN8_IRQ_FINI_NDX
|
|
|
|
POSTING_READ(GEN8_PCU_IIR);
|
|
}
|
|
|
|
static void valleyview_irq_uninstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
if (!dev_priv)
|
|
return;
|
|
|
|
del_timer_sync(&dev_priv->hotplug_reenable_timer);
|
|
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0xffff);
|
|
|
|
I915_WRITE(HWSTAM, 0xffffffff);
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0xffff);
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
I915_WRITE(VLV_IMR, 0xffffffff);
|
|
I915_WRITE(VLV_IER, 0x0);
|
|
POSTING_READ(VLV_IER);
|
|
}
|
|
|
|
static void ironlake_irq_uninstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
if (!dev_priv)
|
|
return;
|
|
|
|
del_timer_sync(&dev_priv->hotplug_reenable_timer);
|
|
|
|
I915_WRITE(HWSTAM, 0xffffffff);
|
|
|
|
I915_WRITE(DEIMR, 0xffffffff);
|
|
I915_WRITE(DEIER, 0x0);
|
|
I915_WRITE(DEIIR, I915_READ(DEIIR));
|
|
if (IS_GEN7(dev))
|
|
I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT));
|
|
|
|
I915_WRITE(GTIMR, 0xffffffff);
|
|
I915_WRITE(GTIER, 0x0);
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
|
|
if (HAS_PCH_NOP(dev))
|
|
return;
|
|
|
|
I915_WRITE(SDEIMR, 0xffffffff);
|
|
I915_WRITE(SDEIER, 0x0);
|
|
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
|
|
if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev))
|
|
I915_WRITE(SERR_INT, I915_READ(SERR_INT));
|
|
}
|
|
|
|
static void i8xx_irq_preinstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE16(IMR, 0xffff);
|
|
I915_WRITE16(IER, 0x0);
|
|
POSTING_READ16(IER);
|
|
}
|
|
|
|
static int i8xx_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
I915_WRITE16(EMR,
|
|
~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
|
|
|
|
/* Unmask the interrupts that we always want on. */
|
|
dev_priv->irq_mask =
|
|
~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
|
|
I915_WRITE16(IMR, dev_priv->irq_mask);
|
|
|
|
I915_WRITE16(IER,
|
|
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
|
|
I915_USER_INTERRUPT);
|
|
POSTING_READ16(IER);
|
|
|
|
/* Interrupt setup is already guaranteed to be single-threaded, this is
|
|
* just to make the assert_spin_locked check happy. */
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_ENABLE);
|
|
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_ENABLE);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Returns true when a page flip has completed.
|
|
*/
|
|
static bool i8xx_handle_vblank(struct drm_device *dev,
|
|
int pipe, u16 iir)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
u16 flip_pending = DISPLAY_PLANE_FLIP_PENDING(pipe);
|
|
|
|
if (!drm_handle_vblank(dev, pipe))
|
|
return false;
|
|
|
|
if ((iir & flip_pending) == 0)
|
|
return false;
|
|
|
|
intel_prepare_page_flip(dev, pipe);
|
|
|
|
/* We detect FlipDone by looking for the change in PendingFlip from '1'
|
|
* to '0' on the following vblank, i.e. IIR has the Pendingflip
|
|
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
|
|
* the flip is completed (no longer pending). Since this doesn't raise
|
|
* an interrupt per se, we watch for the change at vblank.
|
|
*/
|
|
if (I915_READ16(ISR) & flip_pending)
|
|
return false;
|
|
|
|
intel_finish_page_flip(dev, pipe);
|
|
|
|
return true;
|
|
}
|
|
|
|
static irqreturn_t i8xx_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u16 iir, new_iir;
|
|
u32 pipe_stats[2];
|
|
unsigned long irqflags;
|
|
int pipe;
|
|
u16 flip_mask =
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
iir = I915_READ16(IIR);
|
|
if (iir == 0)
|
|
return IRQ_NONE;
|
|
|
|
while (iir & ~flip_mask) {
|
|
/* Can't rely on pipestat interrupt bit in iir as it might
|
|
* have been cleared after the pipestat interrupt was received.
|
|
* It doesn't set the bit in iir again, but it still produces
|
|
* interrupts (for non-MSI).
|
|
*/
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
|
|
i915_handle_error(dev, false);
|
|
|
|
for_each_pipe(pipe) {
|
|
int reg = PIPESTAT(pipe);
|
|
pipe_stats[pipe] = I915_READ(reg);
|
|
|
|
/*
|
|
* Clear the PIPE*STAT regs before the IIR
|
|
*/
|
|
if (pipe_stats[pipe] & 0x8000ffff) {
|
|
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
|
|
DRM_DEBUG_DRIVER("pipe %c underrun\n",
|
|
pipe_name(pipe));
|
|
I915_WRITE(reg, pipe_stats[pipe]);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
I915_WRITE16(IIR, iir & ~flip_mask);
|
|
new_iir = I915_READ16(IIR); /* Flush posted writes */
|
|
|
|
i915_update_dri1_breadcrumb(dev);
|
|
|
|
if (iir & I915_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
|
|
for_each_pipe(pipe) {
|
|
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
|
|
i8xx_handle_vblank(dev, pipe, iir))
|
|
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(pipe);
|
|
|
|
if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS)
|
|
i9xx_pipe_crc_irq_handler(dev, pipe);
|
|
}
|
|
|
|
iir = new_iir;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void i8xx_irq_uninstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
for_each_pipe(pipe) {
|
|
/* Clear enable bits; then clear status bits */
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
|
|
}
|
|
I915_WRITE16(IMR, 0xffff);
|
|
I915_WRITE16(IER, 0x0);
|
|
I915_WRITE16(IIR, I915_READ16(IIR));
|
|
}
|
|
|
|
static void i915_irq_preinstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
if (I915_HAS_HOTPLUG(dev)) {
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
}
|
|
|
|
I915_WRITE16(HWSTAM, 0xeffe);
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(IMR, 0xffffffff);
|
|
I915_WRITE(IER, 0x0);
|
|
POSTING_READ(IER);
|
|
}
|
|
|
|
static int i915_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 enable_mask;
|
|
unsigned long irqflags;
|
|
|
|
I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
|
|
|
|
/* Unmask the interrupts that we always want on. */
|
|
dev_priv->irq_mask =
|
|
~(I915_ASLE_INTERRUPT |
|
|
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
|
|
|
|
enable_mask =
|
|
I915_ASLE_INTERRUPT |
|
|
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
|
|
I915_USER_INTERRUPT;
|
|
|
|
if (I915_HAS_HOTPLUG(dev)) {
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
POSTING_READ(PORT_HOTPLUG_EN);
|
|
|
|
/* Enable in IER... */
|
|
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
|
|
/* and unmask in IMR */
|
|
dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
|
|
}
|
|
|
|
I915_WRITE(IMR, dev_priv->irq_mask);
|
|
I915_WRITE(IER, enable_mask);
|
|
POSTING_READ(IER);
|
|
|
|
i915_enable_asle_pipestat(dev);
|
|
|
|
/* Interrupt setup is already guaranteed to be single-threaded, this is
|
|
* just to make the assert_spin_locked check happy. */
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_ENABLE);
|
|
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_ENABLE);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Returns true when a page flip has completed.
|
|
*/
|
|
static bool i915_handle_vblank(struct drm_device *dev,
|
|
int plane, int pipe, u32 iir)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
u32 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane);
|
|
|
|
if (!drm_handle_vblank(dev, pipe))
|
|
return false;
|
|
|
|
if ((iir & flip_pending) == 0)
|
|
return false;
|
|
|
|
intel_prepare_page_flip(dev, plane);
|
|
|
|
/* We detect FlipDone by looking for the change in PendingFlip from '1'
|
|
* to '0' on the following vblank, i.e. IIR has the Pendingflip
|
|
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
|
|
* the flip is completed (no longer pending). Since this doesn't raise
|
|
* an interrupt per se, we watch for the change at vblank.
|
|
*/
|
|
if (I915_READ(ISR) & flip_pending)
|
|
return false;
|
|
|
|
intel_finish_page_flip(dev, pipe);
|
|
|
|
return true;
|
|
}
|
|
|
|
static irqreturn_t i915_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 iir, new_iir, pipe_stats[I915_MAX_PIPES];
|
|
unsigned long irqflags;
|
|
u32 flip_mask =
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
|
|
int pipe, ret = IRQ_NONE;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
iir = I915_READ(IIR);
|
|
do {
|
|
bool irq_received = (iir & ~flip_mask) != 0;
|
|
bool blc_event = false;
|
|
|
|
/* Can't rely on pipestat interrupt bit in iir as it might
|
|
* have been cleared after the pipestat interrupt was received.
|
|
* It doesn't set the bit in iir again, but it still produces
|
|
* interrupts (for non-MSI).
|
|
*/
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
|
|
i915_handle_error(dev, false);
|
|
|
|
for_each_pipe(pipe) {
|
|
int reg = PIPESTAT(pipe);
|
|
pipe_stats[pipe] = I915_READ(reg);
|
|
|
|
/* Clear the PIPE*STAT regs before the IIR */
|
|
if (pipe_stats[pipe] & 0x8000ffff) {
|
|
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
|
|
DRM_DEBUG_DRIVER("pipe %c underrun\n",
|
|
pipe_name(pipe));
|
|
I915_WRITE(reg, pipe_stats[pipe]);
|
|
irq_received = true;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
if (!irq_received)
|
|
break;
|
|
|
|
/* Consume port. Then clear IIR or we'll miss events */
|
|
if ((I915_HAS_HOTPLUG(dev)) &&
|
|
(iir & I915_DISPLAY_PORT_INTERRUPT)) {
|
|
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
|
|
u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
|
|
|
|
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
|
|
hotplug_status);
|
|
|
|
intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
|
|
POSTING_READ(PORT_HOTPLUG_STAT);
|
|
}
|
|
|
|
I915_WRITE(IIR, iir & ~flip_mask);
|
|
new_iir = I915_READ(IIR); /* Flush posted writes */
|
|
|
|
if (iir & I915_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
|
|
for_each_pipe(pipe) {
|
|
int plane = pipe;
|
|
if (IS_MOBILE(dev))
|
|
plane = !plane;
|
|
|
|
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
|
|
i915_handle_vblank(dev, plane, pipe, iir))
|
|
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(plane);
|
|
|
|
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
|
|
blc_event = true;
|
|
|
|
if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS)
|
|
i9xx_pipe_crc_irq_handler(dev, pipe);
|
|
}
|
|
|
|
if (blc_event || (iir & I915_ASLE_INTERRUPT))
|
|
intel_opregion_asle_intr(dev);
|
|
|
|
/* With MSI, interrupts are only generated when iir
|
|
* transitions from zero to nonzero. If another bit got
|
|
* set while we were handling the existing iir bits, then
|
|
* we would never get another interrupt.
|
|
*
|
|
* This is fine on non-MSI as well, as if we hit this path
|
|
* we avoid exiting the interrupt handler only to generate
|
|
* another one.
|
|
*
|
|
* Note that for MSI this could cause a stray interrupt report
|
|
* if an interrupt landed in the time between writing IIR and
|
|
* the posting read. This should be rare enough to never
|
|
* trigger the 99% of 100,000 interrupts test for disabling
|
|
* stray interrupts.
|
|
*/
|
|
ret = IRQ_HANDLED;
|
|
iir = new_iir;
|
|
} while (iir & ~flip_mask);
|
|
|
|
i915_update_dri1_breadcrumb(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void i915_irq_uninstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
del_timer_sync(&dev_priv->hotplug_reenable_timer);
|
|
|
|
if (I915_HAS_HOTPLUG(dev)) {
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
}
|
|
|
|
I915_WRITE16(HWSTAM, 0xffff);
|
|
for_each_pipe(pipe) {
|
|
/* Clear enable bits; then clear status bits */
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
|
|
}
|
|
I915_WRITE(IMR, 0xffffffff);
|
|
I915_WRITE(IER, 0x0);
|
|
|
|
I915_WRITE(IIR, I915_READ(IIR));
|
|
}
|
|
|
|
static void i965_irq_preinstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
|
|
I915_WRITE(HWSTAM, 0xeffe);
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(IMR, 0xffffffff);
|
|
I915_WRITE(IER, 0x0);
|
|
POSTING_READ(IER);
|
|
}
|
|
|
|
static int i965_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 enable_mask;
|
|
u32 error_mask;
|
|
unsigned long irqflags;
|
|
|
|
/* Unmask the interrupts that we always want on. */
|
|
dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
|
|
I915_DISPLAY_PORT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
|
|
|
|
enable_mask = ~dev_priv->irq_mask;
|
|
enable_mask &= ~(I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT);
|
|
enable_mask |= I915_USER_INTERRUPT;
|
|
|
|
if (IS_G4X(dev))
|
|
enable_mask |= I915_BSD_USER_INTERRUPT;
|
|
|
|
/* Interrupt setup is already guaranteed to be single-threaded, this is
|
|
* just to make the assert_spin_locked check happy. */
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_EVENT_ENABLE);
|
|
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_ENABLE);
|
|
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_ENABLE);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
/*
|
|
* Enable some error detection, note the instruction error mask
|
|
* bit is reserved, so we leave it masked.
|
|
*/
|
|
if (IS_G4X(dev)) {
|
|
error_mask = ~(GM45_ERROR_PAGE_TABLE |
|
|
GM45_ERROR_MEM_PRIV |
|
|
GM45_ERROR_CP_PRIV |
|
|
I915_ERROR_MEMORY_REFRESH);
|
|
} else {
|
|
error_mask = ~(I915_ERROR_PAGE_TABLE |
|
|
I915_ERROR_MEMORY_REFRESH);
|
|
}
|
|
I915_WRITE(EMR, error_mask);
|
|
|
|
I915_WRITE(IMR, dev_priv->irq_mask);
|
|
I915_WRITE(IER, enable_mask);
|
|
POSTING_READ(IER);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
POSTING_READ(PORT_HOTPLUG_EN);
|
|
|
|
i915_enable_asle_pipestat(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i915_hpd_irq_setup(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *intel_encoder;
|
|
u32 hotplug_en;
|
|
|
|
assert_spin_locked(&dev_priv->irq_lock);
|
|
|
|
if (I915_HAS_HOTPLUG(dev)) {
|
|
hotplug_en = I915_READ(PORT_HOTPLUG_EN);
|
|
hotplug_en &= ~HOTPLUG_INT_EN_MASK;
|
|
/* Note HDMI and DP share hotplug bits */
|
|
/* enable bits are the same for all generations */
|
|
list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
|
|
if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
|
|
hotplug_en |= hpd_mask_i915[intel_encoder->hpd_pin];
|
|
/* Programming the CRT detection parameters tends
|
|
to generate a spurious hotplug event about three
|
|
seconds later. So just do it once.
|
|
*/
|
|
if (IS_G4X(dev))
|
|
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
|
|
hotplug_en &= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK;
|
|
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
|
|
|
|
/* Ignore TV since it's buggy */
|
|
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t i965_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 iir, new_iir;
|
|
u32 pipe_stats[I915_MAX_PIPES];
|
|
unsigned long irqflags;
|
|
int irq_received;
|
|
int ret = IRQ_NONE, pipe;
|
|
u32 flip_mask =
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
iir = I915_READ(IIR);
|
|
|
|
for (;;) {
|
|
bool blc_event = false;
|
|
|
|
irq_received = (iir & ~flip_mask) != 0;
|
|
|
|
/* Can't rely on pipestat interrupt bit in iir as it might
|
|
* have been cleared after the pipestat interrupt was received.
|
|
* It doesn't set the bit in iir again, but it still produces
|
|
* interrupts (for non-MSI).
|
|
*/
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
|
|
i915_handle_error(dev, false);
|
|
|
|
for_each_pipe(pipe) {
|
|
int reg = PIPESTAT(pipe);
|
|
pipe_stats[pipe] = I915_READ(reg);
|
|
|
|
/*
|
|
* Clear the PIPE*STAT regs before the IIR
|
|
*/
|
|
if (pipe_stats[pipe] & 0x8000ffff) {
|
|
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
|
|
DRM_DEBUG_DRIVER("pipe %c underrun\n",
|
|
pipe_name(pipe));
|
|
I915_WRITE(reg, pipe_stats[pipe]);
|
|
irq_received = 1;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
if (!irq_received)
|
|
break;
|
|
|
|
ret = IRQ_HANDLED;
|
|
|
|
/* Consume port. Then clear IIR or we'll miss events */
|
|
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
|
|
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
|
|
u32 hotplug_trigger = hotplug_status & (IS_G4X(dev) ?
|
|
HOTPLUG_INT_STATUS_G4X :
|
|
HOTPLUG_INT_STATUS_I915);
|
|
|
|
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
|
|
hotplug_status);
|
|
|
|
intel_hpd_irq_handler(dev, hotplug_trigger,
|
|
IS_G4X(dev) ? hpd_status_gen4 : hpd_status_i915);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
|
|
I915_READ(PORT_HOTPLUG_STAT);
|
|
}
|
|
|
|
I915_WRITE(IIR, iir & ~flip_mask);
|
|
new_iir = I915_READ(IIR); /* Flush posted writes */
|
|
|
|
if (iir & I915_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
if (iir & I915_BSD_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[VCS]);
|
|
|
|
for_each_pipe(pipe) {
|
|
if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS &&
|
|
i915_handle_vblank(dev, pipe, pipe, iir))
|
|
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(pipe);
|
|
|
|
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
|
|
blc_event = true;
|
|
|
|
if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS)
|
|
i9xx_pipe_crc_irq_handler(dev, pipe);
|
|
}
|
|
|
|
|
|
if (blc_event || (iir & I915_ASLE_INTERRUPT))
|
|
intel_opregion_asle_intr(dev);
|
|
|
|
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
|
|
gmbus_irq_handler(dev);
|
|
|
|
/* With MSI, interrupts are only generated when iir
|
|
* transitions from zero to nonzero. If another bit got
|
|
* set while we were handling the existing iir bits, then
|
|
* we would never get another interrupt.
|
|
*
|
|
* This is fine on non-MSI as well, as if we hit this path
|
|
* we avoid exiting the interrupt handler only to generate
|
|
* another one.
|
|
*
|
|
* Note that for MSI this could cause a stray interrupt report
|
|
* if an interrupt landed in the time between writing IIR and
|
|
* the posting read. This should be rare enough to never
|
|
* trigger the 99% of 100,000 interrupts test for disabling
|
|
* stray interrupts.
|
|
*/
|
|
iir = new_iir;
|
|
}
|
|
|
|
i915_update_dri1_breadcrumb(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void i965_irq_uninstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
if (!dev_priv)
|
|
return;
|
|
|
|
del_timer_sync(&dev_priv->hotplug_reenable_timer);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
|
|
I915_WRITE(HWSTAM, 0xffffffff);
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(IMR, 0xffffffff);
|
|
I915_WRITE(IER, 0x0);
|
|
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe),
|
|
I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
|
|
I915_WRITE(IIR, I915_READ(IIR));
|
|
}
|
|
|
|
static void i915_reenable_hotplug_timer_func(unsigned long data)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *)data;
|
|
struct drm_device *dev = dev_priv->dev;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
unsigned long irqflags;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
for (i = (HPD_NONE + 1); i < HPD_NUM_PINS; i++) {
|
|
struct drm_connector *connector;
|
|
|
|
if (dev_priv->hpd_stats[i].hpd_mark != HPD_DISABLED)
|
|
continue;
|
|
|
|
dev_priv->hpd_stats[i].hpd_mark = HPD_ENABLED;
|
|
|
|
list_for_each_entry(connector, &mode_config->connector_list, head) {
|
|
struct intel_connector *intel_connector = to_intel_connector(connector);
|
|
|
|
if (intel_connector->encoder->hpd_pin == i) {
|
|
if (connector->polled != intel_connector->polled)
|
|
DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
|
|
drm_get_connector_name(connector));
|
|
connector->polled = intel_connector->polled;
|
|
if (!connector->polled)
|
|
connector->polled = DRM_CONNECTOR_POLL_HPD;
|
|
}
|
|
}
|
|
}
|
|
if (dev_priv->display.hpd_irq_setup)
|
|
dev_priv->display.hpd_irq_setup(dev);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
void intel_irq_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
|
|
INIT_WORK(&dev_priv->gpu_error.work, i915_error_work_func);
|
|
INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
|
|
INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
|
|
|
|
setup_timer(&dev_priv->gpu_error.hangcheck_timer,
|
|
i915_hangcheck_elapsed,
|
|
(unsigned long) dev);
|
|
setup_timer(&dev_priv->hotplug_reenable_timer, i915_reenable_hotplug_timer_func,
|
|
(unsigned long) dev_priv);
|
|
|
|
pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
|
|
|
|
if (IS_GEN2(dev)) {
|
|
dev->max_vblank_count = 0;
|
|
dev->driver->get_vblank_counter = i8xx_get_vblank_counter;
|
|
} else if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
|
|
dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
|
|
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
|
|
} else {
|
|
dev->driver->get_vblank_counter = i915_get_vblank_counter;
|
|
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
|
|
}
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
|
|
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
|
|
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
|
|
}
|
|
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
dev->driver->irq_handler = valleyview_irq_handler;
|
|
dev->driver->irq_preinstall = valleyview_irq_preinstall;
|
|
dev->driver->irq_postinstall = valleyview_irq_postinstall;
|
|
dev->driver->irq_uninstall = valleyview_irq_uninstall;
|
|
dev->driver->enable_vblank = valleyview_enable_vblank;
|
|
dev->driver->disable_vblank = valleyview_disable_vblank;
|
|
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
|
|
} else if (IS_GEN8(dev)) {
|
|
dev->driver->irq_handler = gen8_irq_handler;
|
|
dev->driver->irq_preinstall = gen8_irq_preinstall;
|
|
dev->driver->irq_postinstall = gen8_irq_postinstall;
|
|
dev->driver->irq_uninstall = gen8_irq_uninstall;
|
|
dev->driver->enable_vblank = gen8_enable_vblank;
|
|
dev->driver->disable_vblank = gen8_disable_vblank;
|
|
dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
|
|
} else if (HAS_PCH_SPLIT(dev)) {
|
|
dev->driver->irq_handler = ironlake_irq_handler;
|
|
dev->driver->irq_preinstall = ironlake_irq_preinstall;
|
|
dev->driver->irq_postinstall = ironlake_irq_postinstall;
|
|
dev->driver->irq_uninstall = ironlake_irq_uninstall;
|
|
dev->driver->enable_vblank = ironlake_enable_vblank;
|
|
dev->driver->disable_vblank = ironlake_disable_vblank;
|
|
dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
|
|
} else {
|
|
if (INTEL_INFO(dev)->gen == 2) {
|
|
dev->driver->irq_preinstall = i8xx_irq_preinstall;
|
|
dev->driver->irq_postinstall = i8xx_irq_postinstall;
|
|
dev->driver->irq_handler = i8xx_irq_handler;
|
|
dev->driver->irq_uninstall = i8xx_irq_uninstall;
|
|
} else if (INTEL_INFO(dev)->gen == 3) {
|
|
dev->driver->irq_preinstall = i915_irq_preinstall;
|
|
dev->driver->irq_postinstall = i915_irq_postinstall;
|
|
dev->driver->irq_uninstall = i915_irq_uninstall;
|
|
dev->driver->irq_handler = i915_irq_handler;
|
|
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
|
|
} else {
|
|
dev->driver->irq_preinstall = i965_irq_preinstall;
|
|
dev->driver->irq_postinstall = i965_irq_postinstall;
|
|
dev->driver->irq_uninstall = i965_irq_uninstall;
|
|
dev->driver->irq_handler = i965_irq_handler;
|
|
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
|
|
}
|
|
dev->driver->enable_vblank = i915_enable_vblank;
|
|
dev->driver->disable_vblank = i915_disable_vblank;
|
|
}
|
|
}
|
|
|
|
void intel_hpd_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct drm_connector *connector;
|
|
unsigned long irqflags;
|
|
int i;
|
|
|
|
for (i = 1; i < HPD_NUM_PINS; i++) {
|
|
dev_priv->hpd_stats[i].hpd_cnt = 0;
|
|
dev_priv->hpd_stats[i].hpd_mark = HPD_ENABLED;
|
|
}
|
|
list_for_each_entry(connector, &mode_config->connector_list, head) {
|
|
struct intel_connector *intel_connector = to_intel_connector(connector);
|
|
connector->polled = intel_connector->polled;
|
|
if (!connector->polled && I915_HAS_HOTPLUG(dev) && intel_connector->encoder->hpd_pin > HPD_NONE)
|
|
connector->polled = DRM_CONNECTOR_POLL_HPD;
|
|
}
|
|
|
|
/* Interrupt setup is already guaranteed to be single-threaded, this is
|
|
* just to make the assert_spin_locked checks happy. */
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (dev_priv->display.hpd_irq_setup)
|
|
dev_priv->display.hpd_irq_setup(dev);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
/* Disable interrupts so we can allow Package C8+. */
|
|
void hsw_pc8_disable_interrupts(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
|
|
dev_priv->pc8.regsave.deimr = I915_READ(DEIMR);
|
|
dev_priv->pc8.regsave.sdeimr = I915_READ(SDEIMR);
|
|
dev_priv->pc8.regsave.gtimr = I915_READ(GTIMR);
|
|
dev_priv->pc8.regsave.gtier = I915_READ(GTIER);
|
|
dev_priv->pc8.regsave.gen6_pmimr = I915_READ(GEN6_PMIMR);
|
|
|
|
ironlake_disable_display_irq(dev_priv, ~DE_PCH_EVENT_IVB);
|
|
ibx_disable_display_interrupt(dev_priv, ~SDE_HOTPLUG_MASK_CPT);
|
|
ilk_disable_gt_irq(dev_priv, 0xffffffff);
|
|
snb_disable_pm_irq(dev_priv, 0xffffffff);
|
|
|
|
dev_priv->pc8.irqs_disabled = true;
|
|
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
/* Restore interrupts so we can recover from Package C8+. */
|
|
void hsw_pc8_restore_interrupts(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
unsigned long irqflags;
|
|
uint32_t val, expected;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
|
|
val = I915_READ(DEIMR);
|
|
expected = ~DE_PCH_EVENT_IVB;
|
|
WARN(val != expected, "DEIMR is 0x%08x, not 0x%08x\n", val, expected);
|
|
|
|
val = I915_READ(SDEIMR) & ~SDE_HOTPLUG_MASK_CPT;
|
|
expected = ~SDE_HOTPLUG_MASK_CPT;
|
|
WARN(val != expected, "SDEIMR non-HPD bits are 0x%08x, not 0x%08x\n",
|
|
val, expected);
|
|
|
|
val = I915_READ(GTIMR);
|
|
expected = 0xffffffff;
|
|
WARN(val != expected, "GTIMR is 0x%08x, not 0x%08x\n", val, expected);
|
|
|
|
val = I915_READ(GEN6_PMIMR);
|
|
expected = 0xffffffff;
|
|
WARN(val != expected, "GEN6_PMIMR is 0x%08x, not 0x%08x\n", val,
|
|
expected);
|
|
|
|
dev_priv->pc8.irqs_disabled = false;
|
|
|
|
ironlake_enable_display_irq(dev_priv, ~dev_priv->pc8.regsave.deimr);
|
|
ibx_enable_display_interrupt(dev_priv,
|
|
~dev_priv->pc8.regsave.sdeimr &
|
|
~SDE_HOTPLUG_MASK_CPT);
|
|
ilk_enable_gt_irq(dev_priv, ~dev_priv->pc8.regsave.gtimr);
|
|
snb_enable_pm_irq(dev_priv, ~dev_priv->pc8.regsave.gen6_pmimr);
|
|
I915_WRITE(GTIER, dev_priv->pc8.regsave.gtier);
|
|
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|