mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 14:32:56 +07:00
7fdcb8e126
With the current approach of scanning, roaming delays are observed. Firmware has support for back ground scanning. To get this advantage, mac80211 hardware scan is implemented, which decides type of scan to do based on connected state. When station is in not connected, driver returns with special value 1 to trigger software scan in mac80211. In case of connected state, background scan will be triggered. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
1002 lines
27 KiB
C
1002 lines
27 KiB
C
/**
|
|
* Copyright (c) 2014 Redpine Signals Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/firmware.h>
|
|
#include <net/bluetooth/bluetooth.h>
|
|
#include "rsi_mgmt.h"
|
|
#include "rsi_hal.h"
|
|
#include "rsi_sdio.h"
|
|
#include "rsi_common.h"
|
|
|
|
/* FLASH Firmware */
|
|
static struct ta_metadata metadata_flash_content[] = {
|
|
{"flash_content", 0x00010000},
|
|
{"rsi/rs9113_wlan_qspi.rps", 0x00010000},
|
|
{"rsi/rs9113_wlan_bt_dual_mode.rps", 0x00010000},
|
|
{"flash_content", 0x00010000},
|
|
{"rsi/rs9113_ap_bt_dual_mode.rps", 0x00010000},
|
|
|
|
};
|
|
|
|
int rsi_send_pkt_to_bus(struct rsi_common *common, struct sk_buff *skb)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
int status;
|
|
|
|
if (common->coex_mode > 1)
|
|
mutex_lock(&common->tx_bus_mutex);
|
|
|
|
status = adapter->host_intf_ops->write_pkt(common->priv,
|
|
skb->data, skb->len);
|
|
|
|
if (common->coex_mode > 1)
|
|
mutex_unlock(&common->tx_bus_mutex);
|
|
|
|
return status;
|
|
}
|
|
|
|
int rsi_prepare_mgmt_desc(struct rsi_common *common, struct sk_buff *skb)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_hdr *wh = NULL;
|
|
struct ieee80211_tx_info *info;
|
|
struct ieee80211_conf *conf = &adapter->hw->conf;
|
|
struct ieee80211_vif *vif;
|
|
struct rsi_mgmt_desc *mgmt_desc;
|
|
struct skb_info *tx_params;
|
|
struct rsi_xtended_desc *xtend_desc = NULL;
|
|
u8 header_size;
|
|
u32 dword_align_bytes = 0;
|
|
|
|
if (skb->len > MAX_MGMT_PKT_SIZE) {
|
|
rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
tx_params = (struct skb_info *)info->driver_data;
|
|
vif = tx_params->vif;
|
|
|
|
/* Update header size */
|
|
header_size = FRAME_DESC_SZ + sizeof(struct rsi_xtended_desc);
|
|
if (header_size > skb_headroom(skb)) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to add extended descriptor\n",
|
|
__func__);
|
|
return -ENOSPC;
|
|
}
|
|
skb_push(skb, header_size);
|
|
dword_align_bytes = ((unsigned long)skb->data & 0x3f);
|
|
if (dword_align_bytes > skb_headroom(skb)) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to add dword align\n", __func__);
|
|
return -ENOSPC;
|
|
}
|
|
skb_push(skb, dword_align_bytes);
|
|
header_size += dword_align_bytes;
|
|
|
|
tx_params->internal_hdr_size = header_size;
|
|
memset(&skb->data[0], 0, header_size);
|
|
wh = (struct ieee80211_hdr *)&skb->data[header_size];
|
|
|
|
mgmt_desc = (struct rsi_mgmt_desc *)skb->data;
|
|
xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ];
|
|
|
|
rsi_set_len_qno(&mgmt_desc->len_qno, (skb->len - FRAME_DESC_SZ),
|
|
RSI_WIFI_MGMT_Q);
|
|
mgmt_desc->frame_type = TX_DOT11_MGMT;
|
|
mgmt_desc->header_len = MIN_802_11_HDR_LEN;
|
|
mgmt_desc->xtend_desc_size = header_size - FRAME_DESC_SZ;
|
|
|
|
if (ieee80211_is_probe_req(wh->frame_control))
|
|
mgmt_desc->frame_info = cpu_to_le16(RSI_INSERT_SEQ_IN_FW);
|
|
mgmt_desc->frame_info |= cpu_to_le16(RATE_INFO_ENABLE);
|
|
if (is_broadcast_ether_addr(wh->addr1))
|
|
mgmt_desc->frame_info |= cpu_to_le16(RSI_BROADCAST_PKT);
|
|
|
|
mgmt_desc->seq_ctrl =
|
|
cpu_to_le16(IEEE80211_SEQ_TO_SN(le16_to_cpu(wh->seq_ctrl)));
|
|
if ((common->band == NL80211_BAND_2GHZ) && !common->p2p_enabled)
|
|
mgmt_desc->rate_info = cpu_to_le16(RSI_RATE_1);
|
|
else
|
|
mgmt_desc->rate_info = cpu_to_le16(RSI_RATE_6);
|
|
|
|
if (conf_is_ht40(conf))
|
|
mgmt_desc->bbp_info = cpu_to_le16(FULL40M_ENABLE);
|
|
|
|
if (ieee80211_is_probe_resp(wh->frame_control)) {
|
|
mgmt_desc->misc_flags |= (RSI_ADD_DELTA_TSF_VAP_ID |
|
|
RSI_FETCH_RETRY_CNT_FRM_HST);
|
|
#define PROBE_RESP_RETRY_CNT 3
|
|
xtend_desc->retry_cnt = PROBE_RESP_RETRY_CNT;
|
|
}
|
|
|
|
if (((vif->type == NL80211_IFTYPE_AP) ||
|
|
(vif->type == NL80211_IFTYPE_P2P_GO)) &&
|
|
(ieee80211_is_action(wh->frame_control))) {
|
|
struct rsi_sta *rsta = rsi_find_sta(common, wh->addr1);
|
|
|
|
if (rsta)
|
|
mgmt_desc->sta_id = tx_params->sta_id;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
mgmt_desc->rate_info |=
|
|
cpu_to_le16((tx_params->vap_id << RSI_DESC_VAP_ID_OFST) &
|
|
RSI_DESC_VAP_ID_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function prepares descriptor for given data packet */
|
|
int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_vif *vif;
|
|
struct ieee80211_hdr *wh = NULL;
|
|
struct ieee80211_tx_info *info;
|
|
struct skb_info *tx_params;
|
|
struct rsi_data_desc *data_desc;
|
|
struct rsi_xtended_desc *xtend_desc;
|
|
u8 ieee80211_size = MIN_802_11_HDR_LEN;
|
|
u8 header_size;
|
|
u8 vap_id = 0;
|
|
u8 dword_align_bytes;
|
|
u16 seq_num;
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
vif = info->control.vif;
|
|
tx_params = (struct skb_info *)info->driver_data;
|
|
|
|
header_size = FRAME_DESC_SZ + sizeof(struct rsi_xtended_desc);
|
|
if (header_size > skb_headroom(skb)) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
|
|
return -ENOSPC;
|
|
}
|
|
skb_push(skb, header_size);
|
|
dword_align_bytes = ((unsigned long)skb->data & 0x3f);
|
|
if (header_size > skb_headroom(skb)) {
|
|
rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__);
|
|
return -ENOSPC;
|
|
}
|
|
skb_push(skb, dword_align_bytes);
|
|
header_size += dword_align_bytes;
|
|
|
|
tx_params->internal_hdr_size = header_size;
|
|
data_desc = (struct rsi_data_desc *)skb->data;
|
|
memset(data_desc, 0, header_size);
|
|
|
|
xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ];
|
|
wh = (struct ieee80211_hdr *)&skb->data[header_size];
|
|
seq_num = IEEE80211_SEQ_TO_SN(le16_to_cpu(wh->seq_ctrl));
|
|
|
|
data_desc->xtend_desc_size = header_size - FRAME_DESC_SZ;
|
|
|
|
if (ieee80211_is_data_qos(wh->frame_control)) {
|
|
ieee80211_size += 2;
|
|
data_desc->mac_flags |= cpu_to_le16(RSI_QOS_ENABLE);
|
|
}
|
|
|
|
if (((vif->type == NL80211_IFTYPE_STATION) ||
|
|
(vif->type == NL80211_IFTYPE_P2P_CLIENT)) &&
|
|
(adapter->ps_state == PS_ENABLED))
|
|
wh->frame_control |= cpu_to_le16(RSI_SET_PS_ENABLE);
|
|
|
|
if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
|
|
(common->secinfo.security_enable)) {
|
|
if (rsi_is_cipher_wep(common))
|
|
ieee80211_size += 4;
|
|
else
|
|
ieee80211_size += 8;
|
|
data_desc->mac_flags |= cpu_to_le16(RSI_ENCRYPT_PKT);
|
|
}
|
|
rsi_set_len_qno(&data_desc->len_qno, (skb->len - FRAME_DESC_SZ),
|
|
RSI_WIFI_DATA_Q);
|
|
data_desc->header_len = ieee80211_size;
|
|
|
|
if (common->min_rate != RSI_RATE_AUTO) {
|
|
/* Send fixed rate */
|
|
data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);
|
|
data_desc->rate_info = cpu_to_le16(common->min_rate);
|
|
|
|
if (conf_is_ht40(&common->priv->hw->conf))
|
|
data_desc->bbp_info = cpu_to_le16(FULL40M_ENABLE);
|
|
|
|
if ((common->vif_info[0].sgi) && (common->min_rate & 0x100)) {
|
|
/* Only MCS rates */
|
|
data_desc->rate_info |=
|
|
cpu_to_le16(ENABLE_SHORTGI_RATE);
|
|
}
|
|
}
|
|
|
|
if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
|
|
rsi_dbg(INFO_ZONE, "*** Tx EAPOL ***\n");
|
|
|
|
data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);
|
|
if (common->band == NL80211_BAND_5GHZ)
|
|
data_desc->rate_info = cpu_to_le16(RSI_RATE_6);
|
|
else
|
|
data_desc->rate_info = cpu_to_le16(RSI_RATE_1);
|
|
data_desc->mac_flags |= cpu_to_le16(RSI_REKEY_PURPOSE);
|
|
data_desc->misc_flags |= RSI_FETCH_RETRY_CNT_FRM_HST;
|
|
#define EAPOL_RETRY_CNT 15
|
|
xtend_desc->retry_cnt = EAPOL_RETRY_CNT;
|
|
|
|
if (common->eapol4_confirm)
|
|
skb->priority = VO_Q;
|
|
else
|
|
rsi_set_len_qno(&data_desc->len_qno,
|
|
(skb->len - FRAME_DESC_SZ),
|
|
RSI_WIFI_MGMT_Q);
|
|
if ((skb->len - header_size) == EAPOL4_PACKET_LEN) {
|
|
data_desc->misc_flags |=
|
|
RSI_DESC_REQUIRE_CFM_TO_HOST;
|
|
xtend_desc->confirm_frame_type = EAPOL4_CONFIRM;
|
|
}
|
|
}
|
|
|
|
data_desc->mac_flags |= cpu_to_le16(seq_num & 0xfff);
|
|
data_desc->qid_tid = ((skb->priority & 0xf) |
|
|
((tx_params->tid & 0xf) << 4));
|
|
data_desc->sta_id = tx_params->sta_id;
|
|
|
|
if ((is_broadcast_ether_addr(wh->addr1)) ||
|
|
(is_multicast_ether_addr(wh->addr1))) {
|
|
data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);
|
|
data_desc->frame_info |= cpu_to_le16(RSI_BROADCAST_PKT);
|
|
data_desc->sta_id = vap_id;
|
|
|
|
if ((vif->type == NL80211_IFTYPE_AP) ||
|
|
(vif->type == NL80211_IFTYPE_P2P_GO)) {
|
|
if (common->band == NL80211_BAND_5GHZ)
|
|
data_desc->rate_info = cpu_to_le16(RSI_RATE_6);
|
|
else
|
|
data_desc->rate_info = cpu_to_le16(RSI_RATE_1);
|
|
}
|
|
}
|
|
if (((vif->type == NL80211_IFTYPE_AP) ||
|
|
(vif->type == NL80211_IFTYPE_P2P_GO)) &&
|
|
(ieee80211_has_moredata(wh->frame_control)))
|
|
data_desc->frame_info |= cpu_to_le16(MORE_DATA_PRESENT);
|
|
|
|
data_desc->rate_info |=
|
|
cpu_to_le16((tx_params->vap_id << RSI_DESC_VAP_ID_OFST) &
|
|
RSI_DESC_VAP_ID_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function sends received data packet from driver to device */
|
|
int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_vif *vif;
|
|
struct ieee80211_tx_info *info;
|
|
struct ieee80211_bss_conf *bss;
|
|
int status = -EINVAL;
|
|
|
|
if (!skb)
|
|
return 0;
|
|
if (common->iface_down)
|
|
goto err;
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
if (!info->control.vif)
|
|
goto err;
|
|
vif = info->control.vif;
|
|
bss = &vif->bss_conf;
|
|
|
|
if (((vif->type == NL80211_IFTYPE_STATION) ||
|
|
(vif->type == NL80211_IFTYPE_P2P_CLIENT)) &&
|
|
(!bss->assoc))
|
|
goto err;
|
|
|
|
status = rsi_send_pkt_to_bus(common, skb);
|
|
if (status)
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n", __func__);
|
|
|
|
err:
|
|
++common->tx_stats.total_tx_pkt_freed[skb->priority];
|
|
rsi_indicate_tx_status(adapter, skb, status);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* rsi_send_mgmt_pkt() - This functions sends the received management packet
|
|
* from driver to device.
|
|
* @common: Pointer to the driver private structure.
|
|
* @skb: Pointer to the socket buffer structure.
|
|
*
|
|
* Return: status: 0 on success, -1 on failure.
|
|
*/
|
|
int rsi_send_mgmt_pkt(struct rsi_common *common,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_bss_conf *bss;
|
|
struct ieee80211_hdr *wh;
|
|
struct ieee80211_tx_info *info;
|
|
struct skb_info *tx_params;
|
|
struct rsi_mgmt_desc *mgmt_desc;
|
|
struct rsi_xtended_desc *xtend_desc;
|
|
int status = -E2BIG;
|
|
u8 header_size;
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
tx_params = (struct skb_info *)info->driver_data;
|
|
header_size = tx_params->internal_hdr_size;
|
|
|
|
if (tx_params->flags & INTERNAL_MGMT_PKT) {
|
|
status = adapter->host_intf_ops->write_pkt(common->priv,
|
|
(u8 *)skb->data,
|
|
skb->len);
|
|
if (status) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to write the packet\n", __func__);
|
|
}
|
|
dev_kfree_skb(skb);
|
|
return status;
|
|
}
|
|
|
|
bss = &info->control.vif->bss_conf;
|
|
wh = (struct ieee80211_hdr *)&skb->data[header_size];
|
|
mgmt_desc = (struct rsi_mgmt_desc *)skb->data;
|
|
xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ];
|
|
|
|
/* Indicate to firmware to give cfm for probe */
|
|
if (ieee80211_is_probe_req(wh->frame_control) && !bss->assoc) {
|
|
rsi_dbg(INFO_ZONE,
|
|
"%s: blocking mgmt queue\n", __func__);
|
|
mgmt_desc->misc_flags = RSI_DESC_REQUIRE_CFM_TO_HOST;
|
|
xtend_desc->confirm_frame_type = PROBEREQ_CONFIRM;
|
|
common->mgmt_q_block = true;
|
|
rsi_dbg(INFO_ZONE, "Mgmt queue blocked\n");
|
|
}
|
|
|
|
status = rsi_send_pkt_to_bus(common, skb);
|
|
if (status)
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
|
|
|
|
rsi_indicate_tx_status(common->priv, skb, status);
|
|
return status;
|
|
}
|
|
|
|
int rsi_send_bt_pkt(struct rsi_common *common, struct sk_buff *skb)
|
|
{
|
|
int status = -EINVAL;
|
|
u8 header_size = 0;
|
|
struct rsi_bt_desc *bt_desc;
|
|
u8 queueno = ((skb->data[1] >> 4) & 0xf);
|
|
|
|
if (queueno == RSI_BT_MGMT_Q) {
|
|
status = rsi_send_pkt_to_bus(common, skb);
|
|
if (status)
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to write bt mgmt pkt\n",
|
|
__func__);
|
|
goto out;
|
|
}
|
|
header_size = FRAME_DESC_SZ;
|
|
if (header_size > skb_headroom(skb)) {
|
|
rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__);
|
|
status = -ENOSPC;
|
|
goto out;
|
|
}
|
|
skb_push(skb, header_size);
|
|
memset(skb->data, 0, header_size);
|
|
bt_desc = (struct rsi_bt_desc *)skb->data;
|
|
|
|
rsi_set_len_qno(&bt_desc->len_qno, (skb->len - FRAME_DESC_SZ),
|
|
RSI_BT_DATA_Q);
|
|
bt_desc->bt_pkt_type = cpu_to_le16(bt_cb(skb)->pkt_type);
|
|
|
|
status = rsi_send_pkt_to_bus(common, skb);
|
|
if (status)
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to write bt pkt\n", __func__);
|
|
|
|
out:
|
|
dev_kfree_skb(skb);
|
|
return status;
|
|
}
|
|
|
|
int rsi_prepare_beacon(struct rsi_common *common, struct sk_buff *skb)
|
|
{
|
|
struct rsi_hw *adapter = (struct rsi_hw *)common->priv;
|
|
struct rsi_data_desc *bcn_frm;
|
|
struct ieee80211_hw *hw = common->priv->hw;
|
|
struct ieee80211_conf *conf = &hw->conf;
|
|
struct ieee80211_vif *vif;
|
|
struct sk_buff *mac_bcn;
|
|
u8 vap_id = 0, i;
|
|
u16 tim_offset = 0;
|
|
|
|
for (i = 0; i < RSI_MAX_VIFS; i++) {
|
|
vif = adapter->vifs[i];
|
|
if (!vif)
|
|
continue;
|
|
if ((vif->type == NL80211_IFTYPE_AP) ||
|
|
(vif->type == NL80211_IFTYPE_P2P_GO))
|
|
break;
|
|
}
|
|
if (!vif)
|
|
return -EINVAL;
|
|
mac_bcn = ieee80211_beacon_get_tim(adapter->hw,
|
|
vif,
|
|
&tim_offset, NULL);
|
|
if (!mac_bcn) {
|
|
rsi_dbg(ERR_ZONE, "Failed to get beacon from mac80211\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
common->beacon_cnt++;
|
|
bcn_frm = (struct rsi_data_desc *)skb->data;
|
|
rsi_set_len_qno(&bcn_frm->len_qno, mac_bcn->len, RSI_WIFI_DATA_Q);
|
|
bcn_frm->header_len = MIN_802_11_HDR_LEN;
|
|
bcn_frm->frame_info = cpu_to_le16(RSI_DATA_DESC_MAC_BBP_INFO |
|
|
RSI_DATA_DESC_NO_ACK_IND |
|
|
RSI_DATA_DESC_BEACON_FRAME |
|
|
RSI_DATA_DESC_INSERT_TSF |
|
|
RSI_DATA_DESC_INSERT_SEQ_NO |
|
|
RATE_INFO_ENABLE);
|
|
bcn_frm->rate_info = cpu_to_le16(vap_id << 14);
|
|
bcn_frm->qid_tid = BEACON_HW_Q;
|
|
|
|
if (conf_is_ht40_plus(conf)) {
|
|
bcn_frm->bbp_info = cpu_to_le16(LOWER_20_ENABLE);
|
|
bcn_frm->bbp_info |= cpu_to_le16(LOWER_20_ENABLE >> 12);
|
|
} else if (conf_is_ht40_minus(conf)) {
|
|
bcn_frm->bbp_info = cpu_to_le16(UPPER_20_ENABLE);
|
|
bcn_frm->bbp_info |= cpu_to_le16(UPPER_20_ENABLE >> 12);
|
|
}
|
|
|
|
if (common->band == NL80211_BAND_2GHZ)
|
|
bcn_frm->bbp_info |= cpu_to_le16(RSI_RATE_1);
|
|
else
|
|
bcn_frm->bbp_info |= cpu_to_le16(RSI_RATE_6);
|
|
|
|
if (mac_bcn->data[tim_offset + 2] == 0)
|
|
bcn_frm->frame_info |= cpu_to_le16(RSI_DATA_DESC_DTIM_BEACON);
|
|
|
|
memcpy(&skb->data[FRAME_DESC_SZ], mac_bcn->data, mac_bcn->len);
|
|
skb_put(skb, mac_bcn->len + FRAME_DESC_SZ);
|
|
|
|
dev_kfree_skb(mac_bcn);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bl_cmd_timeout(struct timer_list *t)
|
|
{
|
|
struct rsi_hw *adapter = from_timer(adapter, t, bl_cmd_timer);
|
|
|
|
adapter->blcmd_timer_expired = true;
|
|
del_timer(&adapter->bl_cmd_timer);
|
|
}
|
|
|
|
static int bl_start_cmd_timer(struct rsi_hw *adapter, u32 timeout)
|
|
{
|
|
timer_setup(&adapter->bl_cmd_timer, bl_cmd_timeout, 0);
|
|
adapter->bl_cmd_timer.expires = (msecs_to_jiffies(timeout) + jiffies);
|
|
|
|
adapter->blcmd_timer_expired = false;
|
|
add_timer(&adapter->bl_cmd_timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bl_stop_cmd_timer(struct rsi_hw *adapter)
|
|
{
|
|
adapter->blcmd_timer_expired = false;
|
|
if (timer_pending(&adapter->bl_cmd_timer))
|
|
del_timer(&adapter->bl_cmd_timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bl_write_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp,
|
|
u16 *cmd_resp)
|
|
{
|
|
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
|
|
u32 regin_val = 0, regout_val = 0;
|
|
u32 regin_input = 0;
|
|
u8 output = 0;
|
|
int status;
|
|
|
|
regin_input = (REGIN_INPUT | adapter->priv->coex_mode);
|
|
|
|
while (!adapter->blcmd_timer_expired) {
|
|
regin_val = 0;
|
|
status = hif_ops->master_reg_read(adapter, SWBL_REGIN,
|
|
®in_val, 2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGIN reading failed..\n",
|
|
__func__, cmd);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
if ((regin_val >> 12) != REGIN_VALID)
|
|
break;
|
|
}
|
|
if (adapter->blcmd_timer_expired) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGIN reading timed out..\n",
|
|
__func__, cmd);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
rsi_dbg(INFO_ZONE,
|
|
"Issuing write to Regin val:%0x sending cmd:%0x\n",
|
|
regin_val, (cmd | regin_input << 8));
|
|
status = hif_ops->master_reg_write(adapter, SWBL_REGIN,
|
|
(cmd | regin_input << 8), 2);
|
|
if (status < 0)
|
|
return status;
|
|
mdelay(1);
|
|
|
|
if (cmd == LOAD_HOSTED_FW || cmd == JUMP_TO_ZERO_PC) {
|
|
/* JUMP_TO_ZERO_PC doesn't expect
|
|
* any response. So return from here
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
while (!adapter->blcmd_timer_expired) {
|
|
regout_val = 0;
|
|
status = hif_ops->master_reg_read(adapter, SWBL_REGOUT,
|
|
®out_val, 2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGOUT reading failed..\n",
|
|
__func__, cmd);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
if ((regout_val >> 8) == REGOUT_VALID)
|
|
break;
|
|
}
|
|
if (adapter->blcmd_timer_expired) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGOUT reading timed out..\n",
|
|
__func__, cmd);
|
|
return status;
|
|
}
|
|
|
|
*cmd_resp = ((u16 *)®out_val)[0] & 0xffff;
|
|
|
|
output = ((u8 *)®out_val)[0] & 0xff;
|
|
|
|
status = hif_ops->master_reg_write(adapter, SWBL_REGOUT,
|
|
(cmd | REGOUT_INVALID << 8), 2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGOUT writing failed..\n",
|
|
__func__, cmd);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
|
|
if (output != exp_resp) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Recvd resp %x for cmd %0x\n",
|
|
__func__, output, cmd);
|
|
return -EINVAL;
|
|
}
|
|
rsi_dbg(INFO_ZONE,
|
|
"%s: Recvd Expected resp %x for cmd %0x\n",
|
|
__func__, output, cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bl_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, char *str)
|
|
{
|
|
u16 regout_val = 0;
|
|
u32 timeout;
|
|
int status;
|
|
|
|
if ((cmd == EOF_REACHED) || (cmd == PING_VALID) || (cmd == PONG_VALID))
|
|
timeout = BL_BURN_TIMEOUT;
|
|
else
|
|
timeout = BL_CMD_TIMEOUT;
|
|
|
|
bl_start_cmd_timer(adapter, timeout);
|
|
status = bl_write_cmd(adapter, cmd, exp_resp, ®out_val);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %s (%0x) writing failed..\n",
|
|
__func__, str, cmd);
|
|
return status;
|
|
}
|
|
bl_stop_cmd_timer(adapter);
|
|
return 0;
|
|
}
|
|
|
|
#define CHECK_SUM_OFFSET 20
|
|
#define LEN_OFFSET 8
|
|
#define ADDR_OFFSET 16
|
|
static int bl_write_header(struct rsi_hw *adapter, u8 *flash_content,
|
|
u32 content_size)
|
|
{
|
|
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
|
|
struct bl_header *bl_hdr;
|
|
u32 write_addr, write_len;
|
|
int status;
|
|
|
|
bl_hdr = kzalloc(sizeof(*bl_hdr), GFP_KERNEL);
|
|
if (!bl_hdr)
|
|
return -ENOMEM;
|
|
|
|
bl_hdr->flags = 0;
|
|
bl_hdr->image_no = cpu_to_le32(adapter->priv->coex_mode);
|
|
bl_hdr->check_sum =
|
|
cpu_to_le32(*(u32 *)&flash_content[CHECK_SUM_OFFSET]);
|
|
bl_hdr->flash_start_address =
|
|
cpu_to_le32(*(u32 *)&flash_content[ADDR_OFFSET]);
|
|
bl_hdr->flash_len = cpu_to_le32(*(u32 *)&flash_content[LEN_OFFSET]);
|
|
write_len = sizeof(struct bl_header);
|
|
|
|
if (adapter->rsi_host_intf == RSI_HOST_INTF_USB) {
|
|
write_addr = PING_BUFFER_ADDRESS;
|
|
status = hif_ops->write_reg_multiple(adapter, write_addr,
|
|
(u8 *)bl_hdr, write_len);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to load Version/CRC structure\n",
|
|
__func__);
|
|
goto fail;
|
|
}
|
|
} else {
|
|
write_addr = PING_BUFFER_ADDRESS >> 16;
|
|
status = hif_ops->master_access_msword(adapter, write_addr);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Unable to set ms word to common reg\n",
|
|
__func__);
|
|
goto fail;
|
|
}
|
|
write_addr = RSI_SD_REQUEST_MASTER |
|
|
(PING_BUFFER_ADDRESS & 0xFFFF);
|
|
status = hif_ops->write_reg_multiple(adapter, write_addr,
|
|
(u8 *)bl_hdr, write_len);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to load Version/CRC structure\n",
|
|
__func__);
|
|
goto fail;
|
|
}
|
|
}
|
|
status = 0;
|
|
fail:
|
|
kfree(bl_hdr);
|
|
return status;
|
|
}
|
|
|
|
static u32 read_flash_capacity(struct rsi_hw *adapter)
|
|
{
|
|
u32 flash_sz = 0;
|
|
|
|
if ((adapter->host_intf_ops->master_reg_read(adapter, FLASH_SIZE_ADDR,
|
|
&flash_sz, 2)) < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Flash size reading failed..\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
rsi_dbg(INIT_ZONE, "Flash capacity: %d KiloBytes\n", flash_sz);
|
|
|
|
return (flash_sz * 1024); /* Return size in kbytes */
|
|
}
|
|
|
|
static int ping_pong_write(struct rsi_hw *adapter, u8 cmd, u8 *addr, u32 size)
|
|
{
|
|
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
|
|
u32 block_size = adapter->block_size;
|
|
u32 cmd_addr;
|
|
u16 cmd_resp, cmd_req;
|
|
u8 *str;
|
|
int status;
|
|
|
|
if (cmd == PING_WRITE) {
|
|
cmd_addr = PING_BUFFER_ADDRESS;
|
|
cmd_resp = PONG_AVAIL;
|
|
cmd_req = PING_VALID;
|
|
str = "PING_VALID";
|
|
} else {
|
|
cmd_addr = PONG_BUFFER_ADDRESS;
|
|
cmd_resp = PING_AVAIL;
|
|
cmd_req = PONG_VALID;
|
|
str = "PONG_VALID";
|
|
}
|
|
|
|
status = hif_ops->load_data_master_write(adapter, cmd_addr, size,
|
|
block_size, addr);
|
|
if (status) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to write blk at addr %0x\n",
|
|
__func__, *addr);
|
|
return status;
|
|
}
|
|
|
|
status = bl_cmd(adapter, cmd_req, cmd_resp, str);
|
|
if (status) {
|
|
bl_stop_cmd_timer(adapter);
|
|
return status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int auto_fw_upgrade(struct rsi_hw *adapter, u8 *flash_content,
|
|
u32 content_size)
|
|
{
|
|
u8 cmd;
|
|
u32 temp_content_size, num_flash, index;
|
|
u32 flash_start_address;
|
|
int status;
|
|
|
|
if (content_size > MAX_FLASH_FILE_SIZE) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Flash Content size is more than 400K %u\n",
|
|
__func__, MAX_FLASH_FILE_SIZE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
flash_start_address = *(u32 *)&flash_content[FLASH_START_ADDRESS];
|
|
rsi_dbg(INFO_ZONE, "flash start address: %08x\n", flash_start_address);
|
|
|
|
if (flash_start_address < FW_IMAGE_MIN_ADDRESS) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Fw image Flash Start Address is less than 64K\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (flash_start_address % FLASH_SECTOR_SIZE) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Flash Start Address is not multiple of 4K\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((flash_start_address + content_size) > adapter->flash_capacity) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Flash Content will cross max flash size\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
temp_content_size = content_size;
|
|
num_flash = content_size / FLASH_WRITE_CHUNK_SIZE;
|
|
|
|
rsi_dbg(INFO_ZONE, "content_size: %d, num_flash: %d\n",
|
|
content_size, num_flash);
|
|
|
|
for (index = 0; index <= num_flash; index++) {
|
|
rsi_dbg(INFO_ZONE, "flash index: %d\n", index);
|
|
if (index != num_flash) {
|
|
content_size = FLASH_WRITE_CHUNK_SIZE;
|
|
rsi_dbg(INFO_ZONE, "QSPI content_size:%d\n",
|
|
content_size);
|
|
} else {
|
|
content_size =
|
|
temp_content_size % FLASH_WRITE_CHUNK_SIZE;
|
|
rsi_dbg(INFO_ZONE,
|
|
"Writing last sector content_size:%d\n",
|
|
content_size);
|
|
if (!content_size) {
|
|
rsi_dbg(INFO_ZONE, "instruction size zero\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (index % 2)
|
|
cmd = PING_WRITE;
|
|
else
|
|
cmd = PONG_WRITE;
|
|
|
|
status = ping_pong_write(adapter, cmd, flash_content,
|
|
content_size);
|
|
if (status) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to load %d block\n",
|
|
__func__, index);
|
|
return status;
|
|
}
|
|
|
|
rsi_dbg(INFO_ZONE,
|
|
"%s: Successfully loaded %d instructions\n",
|
|
__func__, index);
|
|
flash_content += content_size;
|
|
}
|
|
|
|
status = bl_cmd(adapter, EOF_REACHED, FW_LOADING_SUCCESSFUL,
|
|
"EOF_REACHED");
|
|
if (status) {
|
|
bl_stop_cmd_timer(adapter);
|
|
return status;
|
|
}
|
|
rsi_dbg(INFO_ZONE, "FW loading is done and FW is running..\n");
|
|
return 0;
|
|
}
|
|
|
|
static int rsi_load_firmware(struct rsi_hw *adapter)
|
|
{
|
|
struct rsi_common *common = adapter->priv;
|
|
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
|
|
const struct firmware *fw_entry = NULL;
|
|
u32 regout_val = 0, content_size;
|
|
u16 tmp_regout_val = 0;
|
|
struct ta_metadata *metadata_p;
|
|
int status;
|
|
|
|
bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT);
|
|
|
|
while (!adapter->blcmd_timer_expired) {
|
|
status = hif_ops->master_reg_read(adapter, SWBL_REGOUT,
|
|
®out_val, 2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: REGOUT read failed\n", __func__);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
if ((regout_val >> 8) == REGOUT_VALID)
|
|
break;
|
|
}
|
|
if (adapter->blcmd_timer_expired) {
|
|
rsi_dbg(ERR_ZONE, "%s: REGOUT read timedout\n", __func__);
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Soft boot loader not present\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
bl_stop_cmd_timer(adapter);
|
|
|
|
rsi_dbg(INFO_ZONE, "Received Board Version Number: %x\n",
|
|
(regout_val & 0xff));
|
|
|
|
status = hif_ops->master_reg_write(adapter, SWBL_REGOUT,
|
|
(REGOUT_INVALID | REGOUT_INVALID << 8),
|
|
2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE, "%s: REGOUT writing failed..\n", __func__);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
|
|
status = bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS,
|
|
"AUTO_READ_CMD");
|
|
if (status < 0)
|
|
return status;
|
|
|
|
adapter->flash_capacity = read_flash_capacity(adapter);
|
|
if (adapter->flash_capacity <= 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Unable to read flash size from EEPROM\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
metadata_p = &metadata_flash_content[adapter->priv->coex_mode];
|
|
|
|
rsi_dbg(INIT_ZONE, "%s: Loading file %s\n", __func__, metadata_p->name);
|
|
adapter->fw_file_name = metadata_p->name;
|
|
|
|
status = request_firmware(&fw_entry, metadata_p->name, adapter->device);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to open file %s\n",
|
|
__func__, metadata_p->name);
|
|
return status;
|
|
}
|
|
content_size = fw_entry->size;
|
|
rsi_dbg(INFO_ZONE, "FW Length = %d bytes\n", content_size);
|
|
|
|
/* Get the firmware version */
|
|
common->lmac_ver.ver.info.fw_ver[0] =
|
|
fw_entry->data[LMAC_VER_OFFSET] & 0xFF;
|
|
common->lmac_ver.ver.info.fw_ver[1] =
|
|
fw_entry->data[LMAC_VER_OFFSET + 1] & 0xFF;
|
|
common->lmac_ver.major = fw_entry->data[LMAC_VER_OFFSET + 2] & 0xFF;
|
|
common->lmac_ver.release_num =
|
|
fw_entry->data[LMAC_VER_OFFSET + 3] & 0xFF;
|
|
common->lmac_ver.minor = fw_entry->data[LMAC_VER_OFFSET + 4] & 0xFF;
|
|
common->lmac_ver.patch_num = 0;
|
|
rsi_print_version(common);
|
|
|
|
status = bl_write_header(adapter, (u8 *)fw_entry->data, content_size);
|
|
if (status) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: RPS Image header loading failed\n",
|
|
__func__);
|
|
goto fail;
|
|
}
|
|
|
|
bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT);
|
|
status = bl_write_cmd(adapter, CHECK_CRC, CMD_PASS, &tmp_regout_val);
|
|
if (status) {
|
|
bl_stop_cmd_timer(adapter);
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: CHECK_CRC Command writing failed..\n",
|
|
__func__);
|
|
if ((tmp_regout_val & 0xff) == CMD_FAIL) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"CRC Fail.. Proceeding to Upgrade mode\n");
|
|
goto fw_upgrade;
|
|
}
|
|
}
|
|
bl_stop_cmd_timer(adapter);
|
|
|
|
status = bl_cmd(adapter, POLLING_MODE, CMD_PASS, "POLLING_MODE");
|
|
if (status)
|
|
goto fail;
|
|
|
|
load_image_cmd:
|
|
status = bl_cmd(adapter, LOAD_HOSTED_FW, LOADING_INITIATED,
|
|
"LOAD_HOSTED_FW");
|
|
if (status)
|
|
goto fail;
|
|
rsi_dbg(INFO_ZONE, "Load Image command passed..\n");
|
|
goto success;
|
|
|
|
fw_upgrade:
|
|
status = bl_cmd(adapter, BURN_HOSTED_FW, SEND_RPS_FILE, "FW_UPGRADE");
|
|
if (status)
|
|
goto fail;
|
|
|
|
rsi_dbg(INFO_ZONE, "Burn Command Pass.. Upgrading the firmware\n");
|
|
|
|
status = auto_fw_upgrade(adapter, (u8 *)fw_entry->data, content_size);
|
|
if (status == 0) {
|
|
rsi_dbg(ERR_ZONE, "Firmware upgradation Done\n");
|
|
goto load_image_cmd;
|
|
}
|
|
rsi_dbg(ERR_ZONE, "Firmware upgrade failed\n");
|
|
|
|
status = bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS,
|
|
"AUTO_READ_MODE");
|
|
if (status)
|
|
goto fail;
|
|
|
|
success:
|
|
rsi_dbg(ERR_ZONE, "***** Firmware Loading successful *****\n");
|
|
release_firmware(fw_entry);
|
|
return 0;
|
|
|
|
fail:
|
|
rsi_dbg(ERR_ZONE, "##### Firmware loading failed #####\n");
|
|
release_firmware(fw_entry);
|
|
return status;
|
|
}
|
|
|
|
int rsi_hal_device_init(struct rsi_hw *adapter)
|
|
{
|
|
struct rsi_common *common = adapter->priv;
|
|
|
|
switch (adapter->device_model) {
|
|
case RSI_DEV_9113:
|
|
if (rsi_load_firmware(adapter)) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to load TA instructions\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
common->fsm_state = FSM_CARD_NOT_READY;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rsi_hal_device_init);
|
|
|