mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-17 11:46:51 +07:00
ac663db367
Enable operation of the TI OPT3001 light sensor without having an interrupt line available to connect the INT pin to. In this operation mode, we issue a conversion request and simply wait for the conversion time available as timeout value, determined from integration time configuration and the worst-case time given in the data sheet (sect. 6.5, table on p. 5): short integration time (100ms): 110ms + 3ms = 113ms long integration time (800ms): 880ms + 3ms = 883ms This change is transparent as behaviour defaults to using the interrupt method if an interrupt no. is configured via device tree. Interrupt-less operation mode is performed when no valid interrupt no. is given. Signed-off-by: Alexander Koch <mail@alexanderkoch.net> Signed-off-by: Michael Hornung <mhornung.linux@gmail.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> |
||
|---|---|---|
| .. | ||
| accel | ||
| adc | ||
| amplifiers | ||
| buffer | ||
| chemical | ||
| common | ||
| dac | ||
| dummy | ||
| frequency | ||
| gyro | ||
| health | ||
| humidity | ||
| imu | ||
| light | ||
| magnetometer | ||
| orientation | ||
| potentiometer | ||
| pressure | ||
| proximity | ||
| temperature | ||
| trigger | ||
| iio_core_trigger.h | ||
| iio_core.h | ||
| industrialio-buffer.c | ||
| industrialio-configfs.c | ||
| industrialio-core.c | ||
| industrialio-event.c | ||
| industrialio-sw-trigger.c | ||
| industrialio-trigger.c | ||
| industrialio-triggered-event.c | ||
| inkern.c | ||
| Kconfig | ||
| Makefile | ||