Stefan Agner abf1e0a980 tty: serial: fsl_lpuart: lock port on console write ... The console write code is not entirely race free (e.g. the operations to disabling the UART interrupts are not atomic) hence locking is required. This has been become apparent with the PREEMPT RT patchset applied: With the fully preemptible kernel configuration the system often ended up in a freeze already at startup. Disable interrupts and lock using read_lock_irqsave. Try to lock in the sysrq/oops case, but don't bother if locking fails. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2017-03-31 16:56:10 +02:00
..
8250	serial: 8250: 8250_core: Fix irq name for 8250 serial IRQ	2017-03-31 16:56:10 +02:00
cpm_uart	tty: serial: cpm_uart: make use of for_each_node_by_type()	2017-02-03 10:12:16 +01:00
jsm	tty: serial: jsm_tty: constify uart_ops structures	2016-09-02 15:01:16 +02:00
21285.c
altera_jtaguart.c	serial: altera_jtaguart: add earlycon support	2017-03-17 14:14:00 +09:00
altera_uart.c	serial: altera_uart: add earlycon support	2017-03-31 16:56:10 +02:00
amba-pl010.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
amba-pl011.c	Revert "tty: serial: pl011: add ttyAMA for matching pl011 console"	2017-03-17 14:04:06 +09:00
amba-pl011.h	tty: amba-pl011: clean up LCR register offsets	2015-12-13 19:59:48 -08:00
apbuart.c
apbuart.h
ar933x_uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
arc_uart.c	serial/arc: constify uart_ops structures	2016-09-01 21:05:41 +02:00
atmel_serial.c	tty/serial: atmel: move atmel_serial header into driver directory	2017-03-14 10:59:04 +08:00
atmel_serial.h	tty/serial: atmel: move atmel_serial header into driver directory	2017-03-14 10:59:04 +08:00
bcm63xx_uart.c	serial/bcm63xx_uart: constify uart_ops structures	2016-09-02 15:01:16 +02:00
bfin_sport_uart.c	tty: serial: constify dev_pm_ops structures	2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
bfin_uart.c	serial:bfin-uart:Remove 'struct timeval'	2015-12-13 19:59:48 -08:00
clps711x.c	serial: clps711x: Changing the compatibility string to match with the smallest supported chip	2016-07-06 17:38:16 +02:00
crisv10.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
crisv10.h
digicolor-usart.c	tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE	2016-02-14 17:39:36 -08:00
dz.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
dz.h
earlycon-arm-semihost.c	tty/serial: mark __init early_smh_setup() static	2016-09-02 15:03:35 +02:00
earlycon.c	ACPI: parse SPCR and enable matching console	2016-09-28 17:46:46 +02:00
efm32-uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
etraxfs-uart.c
fsl_lpuart.c	tty: serial: fsl_lpuart: lock port on console write	2017-03-31 16:56:10 +02:00
icom.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
icom.h
ifx6x60.c	serial: ifx6x60: Free memory when probe fails	2016-11-10 14:50:46 +01:00
ifx6x60.h
imx.c	serial: imx: Fix the CTS_B polarity in RS485 mode	2017-01-31 10:54:58 +01:00
ioc3_serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
ioc4_serial.c	scripts/spelling.txt: add "comsume(r)" pattern and fix typo instances	2017-02-27 18:43:47 -08:00
ip22zilog.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
ip22zilog.h
Kconfig	serial: altera_uart: add earlycon support	2017-03-31 16:56:10 +02:00
kgdb_nmi.c
kgdboc.c
lantiq.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
lpc32xx_hs.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
m32r_sio.c	serial: m32r_sio: make it explicitly non-modular	2016-06-25 14:00:06 -07:00
Makefile	tty: serial: Makefile: move kgdb to be initialized last	2016-10-27 16:27:24 +02:00
max310x.c	serial: max310x: Add support for newer silicon revisions	2017-01-12 11:51:24 +01:00
max3100.c	tty: serial: constify uart_ops structures	2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c	tty: serial: constify uart_ops structures	2016-09-02 15:01:16 +02:00
meson_uart.c	tty: serial: meson: allow baud-rates higher than 115200	2017-01-19 14:38:57 +01:00
mpc52xx_uart.c	tty: serial: constify psc_ops structs	2016-02-06 22:31:47 -08:00
mps2-uart.c	serial: mps2-uart: make driver explicitly non-modular	2016-06-25 14:01:57 -07:00
mpsc.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
msm_serial.c	tty: serial: msm: Fix module autoload	2017-01-12 11:51:25 +01:00
mux.c
mvebu-uart.c	serial: mvebu-uart: free the IRQ in ->shutdown()	2016-06-25 14:00:06 -07:00
mxs-auart.c	serial: mxs-auart: support CMSPAR termios cflag	2017-01-12 11:51:24 +01:00
netx-serial.c
omap-serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
pch_uart.c	serial: pch_uart: add terminate entry for dmi_system_id tables	2016-10-27 16:01:31 +02:00
pic32_uart.c	serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy	2017-01-12 11:51:24 +01:00
pic32_uart.h	serial: pic32_uart: Add PIC32 UART driver	2016-05-13 14:01:56 +02:00
pmac_zilog.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
pmac_zilog.h
pnx8xxx_uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
pxa.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
rp2.c
sa1100.c
samsung.c	serial: samsung: Continue to work if DMA request fails	2017-03-07 19:58:37 +01:00
samsung.h	serial: samsung: Simplify DMA engine initialization code	2017-01-12 11:51:24 +01:00
sb1250-duart.c	drivers: convert sbd_duart.map_guard from atomic_t to refcount_t	2017-03-14 11:01:40 +08:00
sc16is7xx.c	sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h>	2017-03-02 08:42:27 +01:00
sccnxp.c
serial_core.c	tty: serial_core: Add name field to uart_port struct	2017-03-31 16:56:10 +02:00
serial_ks8695.c	serial: Fix ASYNC_* => UPF_* flags misuse	2016-01-28 14:17:42 -08:00
serial_mctrl_gpio.c	serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct	2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h	serial: mctrl_gpio: add modem control read routine	2016-06-25 14:30:42 -07:00
serial_txx9.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
serial-tegra.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sh-sci.c	serial: sh-sci: Fix (AUTO)RTS in sci_init_pins()	2017-03-31 15:29:06 +02:00
sh-sci.h	serial: sh-sci: consider DR (data ready) bit adequately	2017-02-03 10:14:10 +01:00
sirfsoc_uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sirfsoc_uart.h	serial: sirf: make fifo functions static	2016-06-25 14:01:57 -07:00
sn_console.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sprd_serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
st-asc.c	serial: st-asc: Change default baudrate from 9600 to 115200	2017-03-31 15:29:05 +02:00
stm32-usart.c	serial: stm32: mark symbols static where possible	2016-09-27 12:55:27 +02:00
stm32-usart.h	serial: stm32: Fix comparisons with undefined register	2016-10-27 16:00:31 +02:00
suncore.c
sunhv.c	sparc64: Send break twice from console to return to boot prom	2017-02-23 08:27:24 -08:00
sunsab.c
sunsab.h
sunsu.c	serial: sunsu: Free memory when probe fails	2016-11-16 10:57:26 +01:00
sunzilog.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sunzilog.h
tilegx.c
timbuart.c	tty: serial: constify uart_ops structures	2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c	uartlite: Adding a kernel parameter for the number of uartlites	2017-03-17 14:14:30 +09:00
ucc_uart.c	QE-UART: add "fsl,t1040-ucc-uart" to of_device_id	2016-05-01 13:55:12 -07:00
vr41xx_siu.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
vt8500_serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
xilinx_uartps.c	serial: xuartps: Cleanup the clock enable	2017-03-17 14:14:00 +09:00
zs.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
zs.h