mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
303b3cf95e
Some new touchpads IC are connected through PS/2 and I2C. On some of these new IC, the I2C part doesn't have all of the information available. We need to be able to forward the touchpad parameters from PS/2 and thus, we need those new optional properties. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
45 lines
1.3 KiB
Plaintext
45 lines
1.3 KiB
Plaintext
Elantech I2C Touchpad
|
|
|
|
Required properties:
|
|
- compatible: must be "elan,ekth3000".
|
|
- reg: I2C address of the chip.
|
|
- interrupts: interrupt to which the chip is connected (see interrupt
|
|
binding[0]).
|
|
|
|
Optional properties:
|
|
- wakeup-source: touchpad can be used as a wakeup source.
|
|
- pinctrl-names: should be "default" (see pinctrl binding [1]).
|
|
- pinctrl-0: a phandle pointing to the pin settings for the device (see
|
|
pinctrl binding [1]).
|
|
- vcc-supply: a phandle for the regulator supplying 3.3V power.
|
|
- elan,trackpoint: touchpad can support a trackpoint (boolean)
|
|
- elan,clickpad: touchpad is a clickpad (the entire surface is a button)
|
|
- elan,middle-button: touchpad has a physical middle button
|
|
- elan,x_traces: number of antennas on the x axis
|
|
- elan,y_traces: number of antennas on the y axis
|
|
- some generic touchscreen properties [2]:
|
|
* touchscreen-size-x
|
|
* touchscreen-size-y
|
|
* touchscreen-x-mm
|
|
* touchscreen-y-mm
|
|
|
|
|
|
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
|
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
|
[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
|
|
|
|
Example:
|
|
&i2c1 {
|
|
/* ... */
|
|
|
|
touchpad@15 {
|
|
compatible = "elan,ekth3000";
|
|
reg = <0x15>;
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-source;
|
|
};
|
|
|
|
/* ... */
|
|
};
|