AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-24 00:10:10 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
ab9e314886
linux_dsm_epyc7002/drivers/iio/accel/adis16209.c
Thomas Gleixner 80503b23b2 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 
Based on 1 normalized pattern(s):

  licensed under the gpl 2 or later

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 82 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190524100845.150836982@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:25:18 -07:00

330 lines
8.7 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer
*
* Copyright 2010 Analog Devices Inc.
*/
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/iio/iio.h>
#include <linux/iio/imu/adis.h>
#define ADIS16209_STARTUP_DELAY_MS 220
#define ADIS16209_FLASH_CNT_REG 0x00
/* Data Output Register Definitions */
#define ADIS16209_SUPPLY_OUT_REG 0x02
#define ADIS16209_XACCL_OUT_REG 0x04
#define ADIS16209_YACCL_OUT_REG 0x06
/* Output, auxiliary ADC input */
#define ADIS16209_AUX_ADC_REG 0x08
/* Output, temperature */
#define ADIS16209_TEMP_OUT_REG 0x0A
/* Output, +/- 90 degrees X-axis inclination */
#define ADIS16209_XINCL_OUT_REG 0x0C
#define ADIS16209_YINCL_OUT_REG 0x0E
/* Output, +/-180 vertical rotational position */
#define ADIS16209_ROT_OUT_REG 0x10
/*
* Calibration Register Definitions.
* Acceleration, inclination or rotation offset null.
*/
#define ADIS16209_XACCL_NULL_REG 0x12
#define ADIS16209_YACCL_NULL_REG 0x14
#define ADIS16209_XINCL_NULL_REG 0x16
#define ADIS16209_YINCL_NULL_REG 0x18
#define ADIS16209_ROT_NULL_REG 0x1A
/* Alarm Register Definitions */
#define ADIS16209_ALM_MAG1_REG 0x20
#define ADIS16209_ALM_MAG2_REG 0x22
#define ADIS16209_ALM_SMPL1_REG 0x24
#define ADIS16209_ALM_SMPL2_REG 0x26
#define ADIS16209_ALM_CTRL_REG 0x28
#define ADIS16209_AUX_DAC_REG 0x30
#define ADIS16209_GPIO_CTRL_REG 0x32
#define ADIS16209_SMPL_PRD_REG 0x36
#define ADIS16209_AVG_CNT_REG 0x38
#define ADIS16209_SLP_CNT_REG 0x3A
#define ADIS16209_MSC_CTRL_REG 0x34
#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10)
#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8)
#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2)
/* Data-ready polarity: 1 = active high, 0 = active low */
#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
#define ADIS16209_STAT_REG 0x3C
#define ADIS16209_STAT_ALARM2 BIT(9)
#define ADIS16209_STAT_ALARM1 BIT(8)
#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5
#define ADIS16209_STAT_SPI_FAIL_BIT 3
#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
/* Power supply above 3.625 V */
#define ADIS16209_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
#define ADIS16209_STAT_POWER_LOW_BIT 0
#define ADIS16209_CMD_REG 0x3E
#define ADIS16209_CMD_SW_RESET BIT(7)
#define ADIS16209_CMD_CLEAR_STAT BIT(4)
#define ADIS16209_CMD_FACTORY_CAL BIT(1)
#define ADIS16209_ERROR_ACTIVE BIT(14)
enum adis16209_scan {
ADIS16209_SCAN_SUPPLY,
ADIS16209_SCAN_ACC_X,
ADIS16209_SCAN_ACC_Y,
ADIS16209_SCAN_AUX_ADC,
ADIS16209_SCAN_TEMP,
ADIS16209_SCAN_INCLI_X,
ADIS16209_SCAN_INCLI_Y,
ADIS16209_SCAN_ROT,
};
static const u8 adis16209_addresses[8][1] = {
[ADIS16209_SCAN_SUPPLY] = { },
[ADIS16209_SCAN_AUX_ADC] = { },
[ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL_REG },
[ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL_REG },
[ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL_REG },
[ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL_REG },
[ADIS16209_SCAN_ROT] = { },
[ADIS16209_SCAN_TEMP] = { },
};
static int adis16209_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask)
{
struct adis *st = iio_priv(indio_dev);
int m;
if (mask != IIO_CHAN_INFO_CALIBBIAS)
return -EINVAL;
switch (chan->type) {
case IIO_ACCEL:
case IIO_INCLI:
m = GENMASK(13, 0);
break;
default:
return -EINVAL;
}
return adis_write_reg_16(st, adis16209_addresses[chan->scan_index][0],
val & m);
}
static int adis16209_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
s16 val16;
switch (mask) {
case IIO_CHAN_INFO_RAW:
return adis_single_conversion(indio_dev, chan,
ADIS16209_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
*val = 0;
switch (chan->channel) {
case 0:
*val2 = 305180; /* 0.30518 mV */
break;
case 1:
*val2 = 610500; /* 0.6105 mV */
break;
default:
return -EINVAL;
}
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
*val = -470;
*val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
/*
* IIO base unit for sensitivity of accelerometer
* is milli g.
* 1 LSB represents 0.244 mg.
*/
*val = 0;
*val2 = IIO_G_TO_M_S_2(244140);
return IIO_VAL_INT_PLUS_NANO;
case IIO_INCLI:
case IIO_ROT:
/*
* IIO base units for rotation are degrees.
* 1 LSB represents 0.025 milli degrees.
*/
*val = 0;
*val2 = 25000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
/*
* The raw ADC value is 0x4FE when the temperature
* is 45 degrees and the scale factor per milli
* degree celcius is -470.
*/
*val = 25000 / -470 - 0x4FE;
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
case IIO_ACCEL:
bits = 14;
break;
default:
return -EINVAL;
}
addr = adis16209_addresses[chan->scan_index][0];
ret = adis_read_reg_16(st, addr, &val16);
if (ret)
return ret;
*val = sign_extend32(val16, bits - 1);
return IIO_VAL_INT;
}
return -EINVAL;
}
static const struct iio_chan_spec adis16209_channels[] = {
ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT_REG, ADIS16209_SCAN_SUPPLY,
0, 14),
ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT_REG, ADIS16209_SCAN_TEMP, 0, 12),
ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT_REG, ADIS16209_SCAN_ACC_X,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT_REG, ADIS16209_SCAN_ACC_Y,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC_REG, ADIS16209_SCAN_AUX_ADC, 0, 12),
ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT_REG, ADIS16209_SCAN_INCLI_X,
0, 0, 14),
ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT_REG, ADIS16209_SCAN_INCLI_Y,
0, 0, 14),
ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT_REG, ADIS16209_SCAN_ROT, 0, 0, 14),
IIO_CHAN_SOFT_TIMESTAMP(8)
};
static const struct iio_info adis16209_info = {
.read_raw = adis16209_read_raw,
.write_raw = adis16209_write_raw,
.update_scan_mode = adis_update_scan_mode,
};
static const char * const adis16209_status_error_msgs[] = {
[ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
[ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
[ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
[ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};
static const struct adis_data adis16209_data = {
.read_delay = 30,
.msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
.glob_cmd_reg = ADIS16209_CMD_REG,
.diag_stat_reg = ADIS16209_STAT_REG,
.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
.self_test_no_autoclear = true,
.startup_delay = ADIS16209_STARTUP_DELAY_MS,
.status_error_msgs = adis16209_status_error_msgs,
.status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
BIT(ADIS16209_STAT_POWER_LOW_BIT),
};
static int adis16209_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct adis *st;
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
spi_set_drvdata(spi, indio_dev);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16209_info;
indio_dev->channels = adis16209_channels;
indio_dev->num_channels = ARRAY_SIZE(adis16209_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
ret = adis_init(st, indio_dev, spi, &adis16209_data);
if (ret)
return ret;
ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
if (ret)
return ret;
ret = adis_initial_startup(st);
if (ret)
goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_cleanup_buffer_trigger;
return 0;
error_cleanup_buffer_trigger:
adis_cleanup_buffer_and_trigger(st, indio_dev);
return ret;
}
static int adis16209_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
adis_cleanup_buffer_and_trigger(st, indio_dev);
return 0;
}
static struct spi_driver adis16209_driver = {
.driver = {
.name = "adis16209",
},
.probe = adis16209_probe,
.remove = adis16209_remove,
};
module_spi_driver(adis16209_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16209");
Reference in New Issue View Git Blame Copy Permalink