linux_dsm_epyc7002/arch/arm/mach-imx
Linus Torvalds e79ab194d1 ARM: SoC platform updates for v4.10
These are updates for platform specific code on 32-bit ARM machines,
 essentially anything that can not (yet) be expressed using DT files.
 
 Noteworthy changes include:
 
 - Added support for the TI DRA71x family of SoCs in mach-omap2,
   this is an new variant of the the DRA72x/DRA74x automotive
   infotainment chips we already supported for a while.
 
 - Added support for the ST STM32F746 SoC, the first Cortex-M7
   based microcontroller we support, related to the smaller
   STM32F4 family.
 
 - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile,
   see http://elinux.org/RZ-G
 
 - SMP is now supported on the OX820 platform
 
 - A lot of code in mach-omap2 gets removed as a follow-up to
   removing support for board files in the previous release
 
 - Davinci has some new work to improve USB support
 
 - For i.MX, the performance monitor now supports profiling the
   memory controller using 'perf'
 
 Conflicts:
 arch/arm/mach-shmobile/setup-rcar-gen2.c: rcar_gen2_clocks_init()
 is gone, calling of_clk_init(NULL) is sufficient now.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMS9WCrR//JCVInAQIG+Q/7BElvubqO/Cc/VEAyoB5iF9OB9wPD2t5p
 O0KwtrTtzqJZJNGTmPiesR4DMZH07O1XoW8HqvBPeXtB7/t0tmOegwK+WABbpkSE
 ZQgUjtrIGwteJXYqU2BbhooO8G6mEsfWaqdGX8ZiIk40fPhMN6536lG+JA8DV7uv
 ckAPHCZkIf34lDtwljN97Cvj1TT9lBFp04bx7alKqfg1IMV+iMSxvSRHuuFlxRCk
 kzwVXDmFlZLmueU2KbQXTuOUrvehIGlZ/X5QWlxfrjwCwnOvr54p8WDoVWu2UkHm
 Dc8BVfsBny8mCZJRzfDD1S0PD0mWn1msdOhRb4VRzsC9DnRI4qbL0/Hstu8A7yUQ
 kBtMyVtFTzvRSclABbHHN6Mnm37AyNwSIKIB8h2U1m7YHqZGwHLaflVT5sf3tl7m
 4arTVqHtR8oSU5G5a2FTznMM2rfIx4LcCBbLQxWqzmO4Qrh4j6t7c2i7+VTfFAja
 0bToLgTArKK/cep6PWeBnMH14nzlXoKtBf2T8qwQPuAmLKy9E0ZduLKZ01B/nqrj
 OXcsnG0OUuqU4RgbIaDssRU4ohKIk8JcAl60TdRFhzj+/LTbeMaWVwbWuQS+iHd3
 zfzGUoUIhElx0vHt6ghR0BYQadszb1z9V0NEs3UM0v5cWlNodX//3okH8lZmSW6w
 +fO4dSnIKIA=
 =BF6Y
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...
2016-12-15 15:39:02 -08:00
..
devices ARM: imx: remove platform-mxc_rnga 2016-08-16 13:59:15 +08:00
3ds_debugboard.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
3ds_debugboard.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
anatop.c ARM: imx: Add msl code support for imx6qp 2016-02-14 11:07:17 +08:00
avic.c ARM: i.MX: Fix FIQ interrupt handling for TZIC 2016-06-21 15:57:05 +08:00
board-mx31lilly.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-mx31lite.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-mx31moboard.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
common.h ARM: clk: imx31: properly init clocks for machines with DT 2016-11-01 16:44:46 +08:00
cpu-imx5.c ARM: imx: remove last call to cpu_is_mx5* 2016-06-28 10:26:42 +08:00
cpu-imx25.c ARM: mx25: Retrieve IIM base from dt 2015-03-13 22:06:35 +08:00
cpu-imx27.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu-imx31.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu-imx35.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
cpu.c ARM: imx: remove cpu_is_mx*() 2016-06-28 10:26:45 +08:00
cpuidle-imx5.c cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
cpuidle-imx6q.c ARM: imx: rename imx6q_set_int_mem_clk_lpm() function 2016-08-29 22:39:27 +08:00
cpuidle-imx6sl.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle-imx6sx.c ARM: imx: add cpuidle support for i.mx6ul 2016-08-29 22:39:28 +08:00
cpuidle.h ARM: imx: support arm power off in cpuidle for i.mx6sx 2015-01-05 21:34:29 +08:00
crmregs-imx3.h
devices-imx21.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx27.h ARM : i.MX27 : split code for allocation of ressources of camera and eMMA 2012-11-16 16:21:48 +01:00
devices-imx31.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx35.h ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
ehci-imx27.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx31.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx35.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci.h ARM: imx5: remove imx51 non-DT support files 2014-07-18 16:10:05 +08:00
epit.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
gpc.c Merge branch 'pm-domains' 2016-12-12 20:43:19 +01:00
hardware.h ARM: imx: (trivial) fix typo and grammar 2016-09-05 10:36:19 +08:00
headsmp.S ARM: imx: enable big endian mode 2016-02-02 13:31:19 +08:00
hotplug.c ARM: imx: do not return from imx_cpu_die() call 2013-10-21 09:37:31 +08:00
iim.h ARM: imx: include iim.h rather than mach/iim.h 2012-10-15 10:03:10 +08:00
imx27-dt.c ARM: imx: rework mx27_pm_init() call 2016-06-28 10:26:40 +08:00
imx31-dt.c ARM: clk: imx31: properly init clocks for machines with DT 2016-11-01 16:44:46 +08:00
imx35-dt.c ARM: i.MX: Do not explicitly call l2x0_of_init() 2016-06-21 20:40:47 +08:00
iomux-imx31.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-mx2x.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx3.h ARM: i.MX31 iomux: remove duplicates with alternate name 2016-08-08 21:41:17 +08:00
iomux-mx21.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx27.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx35.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-v1.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-v1.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-v3.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
iomux-v3.h ARM: imx: Fix trivial typo in comments 2015-03-03 12:05:46 +08:00
irq-common.c ARM: i.MX: Fix FIQ interrupt handling for TZIC 2016-06-21 15:57:05 +08:00
irq-common.h ARM: imx: drop support for irq priorisation 2013-12-09 13:18:25 +08:00
Kconfig ARM: imx: Drop errata 769419 for Vybrid 2016-11-14 14:57:47 +08:00
mach-armadillo5x0.c ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late 2016-09-20 22:35:08 +08:00
mach-bug.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-imx1.c ARM: i.MX: Move SOC_IMX1 into 'Device tree only' 2016-08-09 22:47:29 +08:00
mach-imx6q.c ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031 2016-10-24 21:26:01 +08:00
mach-imx6sl.c ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-imx6sx.c ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-imx6ul.c ARM: imx: mach-imx6ul: add imx6ull support 2016-11-15 08:58:43 +08:00
mach-imx7d.c ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
mach-imx25.c ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
mach-imx27_visstrim_m10.c ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late 2016-09-20 22:35:17 +08:00
mach-imx50.c ARM: imx: Use IRQCHIP_DECLARE for TZIC 2016-06-12 19:47:18 +08:00
mach-imx51.c ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
mach-imx53.c ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-kzm_arm11_01.c ARM: SoC platform updates for v4.9 2016-10-07 21:18:42 -07:00
mach-ls1021a.c ARM: imx: Add Freescale LS1021A SMP support 2014-11-23 14:56:21 +08:00
mach-mx21ads.c ARM: imx legacy: mx21ads: move peripheral initialization to .init_late 2016-09-20 22:39:06 +08:00
mach-mx27_3ds.c ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late 2016-09-20 22:35:20 +08:00
mach-mx27ads.c ARM: imx legacy: mx27ads: move peripheral initialization to .init_late 2016-09-20 22:39:07 +08:00
mach-mx31_3ds.c ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late 2016-09-20 22:35:00 +08:00
mach-mx31ads.c ARM: imx legacy: mx31ads: move peripheral initialization to .init_late 2016-09-20 22:34:51 +08:00
mach-mx31lilly.c ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late 2016-09-20 22:34:54 +08:00
mach-mx31lite.c ARM: imx legacy: mx31lite: move peripheral initialization to .init_late 2016-09-20 22:34:47 +08:00
mach-mx31moboard.c ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late 2016-09-20 22:35:11 +08:00
mach-mx35_3ds.c ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late 2016-09-20 22:35:23 +08:00
mach-pca100.c ARM: imx legacy: pca100: move peripheral initialization to .init_late 2016-09-20 22:39:07 +08:00
mach-pcm037_eet.c ARM: imx: include common.h rather than mach/common.h 2012-10-15 10:03:10 +08:00
mach-pcm037.c ARM: SoC platform updates for v4.9 2016-10-07 21:18:42 -07:00
mach-pcm043.c ARM: imx legacy: pcm043: move peripheral initialization to .init_late 2016-09-20 22:39:06 +08:00
mach-qong.c ARM: imx legacy: qong: move peripheral initialization to .init_late 2016-09-20 22:35:04 +08:00
mach-vf610.c ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC 2015-05-20 23:10:14 +02:00
mach-vpr200.c ARM: imx legacy: vpr200: move peripheral initialization to .init_late 2016-09-20 22:35:14 +08:00
Makefile Revert "arm: move exports to definitions" 2016-11-23 10:00:03 +00:00
Makefile.boot ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC 2015-05-20 23:10:14 +02:00
mm-imx3.c ARM: imx: deconstruct mx3_idle 2016-06-28 10:26:37 +08:00
mm-imx21.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx27.c ARM: imx: rework mx27_pm_init() call 2016-06-28 10:26:40 +08:00
mmdc.c ARM: imx: mmdc perf function support i.MX6QP 2016-11-14 13:34:45 +08:00
mx2x.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx3x.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
mx21.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx27.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
mx31.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31lilly-db.c ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late 2016-09-20 22:34:54 +08:00
mx31lite-db.c ARM: imx legacy: mx31lite: move peripheral initialization to .init_late 2016-09-20 22:34:47 +08:00
mx31moboard-devboard.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx31moboard-marxbot.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx31moboard-smartbot.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx35.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mxc.h ARM: imx: remove cpu_is_mx*() 2016-06-28 10:26:45 +08:00
pcm037.h
platsmp.c ARM: use const and __initconst for smp_operations 2015-12-01 22:17:45 +01:00
pm-imx5.c ARM: imx: use endian-safe readl/readw/writel/writew 2016-02-02 13:24:17 +08:00
pm-imx6.c ARM: SoC platform updates for v4.9 2016-10-07 21:18:42 -07:00
pm-imx25.c ARM: mx25: Add basic suspend/resume support 2016-02-14 11:24:18 +08:00
pm-imx27.c ARM: imx: rework mx27_pm_init() call 2016-06-28 10:26:40 +08:00
src.c ARM: imx: Make reset_control_ops const 2016-02-29 10:37:44 +08:00
ssi-fiq-ksym.c Revert "arm: move exports to definitions" 2016-11-23 10:00:03 +00:00
ssi-fiq.S Revert "arm: move exports to definitions" 2016-11-23 10:00:03 +00:00
suspend-imx6.S ARM: imx: add suspend/resume support for i.mx6ul 2015-09-17 08:54:35 +08:00
suspend-imx53.S ARM: imx53: Set DDR pins to high impedance when in suspend to RAM. 2015-06-03 14:49:36 +08:00
system.c ARM: imx: remove cpu_is_mx1 check 2016-06-28 10:26:20 +08:00
tzic.c ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
ulpi.h ARM: imx: Remove mxc specific ulpi access ops 2013-06-17 15:45:16 +08:00