linux_dsm_epyc7002/arch/powerpc/platforms/86xx/gef_sbc610.c
Martyn Welch 948e78c3fc powerpc/86xx: Renaming following split of GE Fanuc joint venture
This patch renames GE Fanuc boards following the split-up of the GE Fanuc
joint venture. These boards are now made by GE Intelligent platorms.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-04 10:43:44 -06:00

229 lines
5.2 KiB
C

/*
* GE SBC610 board support
*
* Author: Martyn Welch <martyn.welch@ge.com>
*
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
* Copyright 2006 Freescale Semiconductor Inc.
*
* NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <asm/nvram.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
#include "mpc86xx.h"
#include "gef_pic.h"
#undef DEBUG
#ifdef DEBUG
#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
#else
#define DBG (fmt...) do { } while (0)
#endif
void __iomem *sbc610_regs;
static void __init gef_sbc610_init_irq(void)
{
struct device_node *cascade_node = NULL;
mpc86xx_init_irq();
/*
* There is a simple interrupt handler in the main FPGA, this needs
* to be cascaded into the MPIC
*/
cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
if (!cascade_node) {
printk(KERN_WARNING "SBC610: No FPGA PIC\n");
return;
}
gef_pic_init(cascade_node);
of_node_put(cascade_node);
}
static void __init gef_sbc610_setup_arch(void)
{
struct device_node *regs;
#ifdef CONFIG_PCI
struct device_node *np;
for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
fsl_add_bridge(np, 1);
}
#endif
printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
#ifdef CONFIG_SMP
mpc86xx_smp_init();
#endif
/* Remap basic board registers */
regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
if (regs) {
sbc610_regs = of_iomap(regs, 0);
if (sbc610_regs == NULL)
printk(KERN_WARNING "Unable to map board registers\n");
of_node_put(regs);
}
#if defined(CONFIG_MMIO_NVRAM)
mmio_nvram_init();
#endif
}
/* Return the PCB revision */
static unsigned int gef_sbc610_get_pcb_rev(void)
{
unsigned int reg;
reg = ioread32(sbc610_regs);
return (reg >> 8) & 0xff;
}
/* Return the board (software) revision */
static unsigned int gef_sbc610_get_board_rev(void)
{
unsigned int reg;
reg = ioread32(sbc610_regs);
return (reg >> 16) & 0xff;
}
/* Return the FPGA revision */
static unsigned int gef_sbc610_get_fpga_rev(void)
{
unsigned int reg;
reg = ioread32(sbc610_regs);
return (reg >> 24) & 0xf;
}
static void gef_sbc610_show_cpuinfo(struct seq_file *m)
{
uint svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
('A' + gef_sbc610_get_board_rev() - 1));
seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
}
static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
/* Do not do the fixup on other platforms! */
if (!machine_is(gef_sbc610))
return;
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
pci_read_config_dword(pdev, 0xe0, &val);
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
/* System clock is 48-MHz Oscillator and EHCI Enabled. */
pci_write_config_dword(pdev, 0xe4, 1 << 5);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
gef_sbc610_nec_fixup);
/*
* Called very early, device-tree isn't unflattened
*
* This function is called to determine whether the BSP is compatible with the
* supplied device-tree, which is assumed to be the correct one for the actual
* board. It is expected thati, in the future, a kernel may support multiple
* boards.
*/
static int __init gef_sbc610_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "gef,sbc610"))
return 1;
return 0;
}
static long __init mpc86xx_time_init(void)
{
unsigned int temp;
/* Set the time base to zero */
mtspr(SPRN_TBWL, 0);
mtspr(SPRN_TBWU, 0);
temp = mfspr(SPRN_HID0);
temp |= HID0_TBEN;
mtspr(SPRN_HID0, temp);
asm volatile("isync");
return 0;
}
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{},
};
static int __init declare_of_platform_devices(void)
{
printk(KERN_DEBUG "Probe platform devices\n");
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(gef_sbc610, declare_of_platform_devices);
define_machine(gef_sbc610) {
.name = "GE SBC610",
.probe = gef_sbc610_probe,
.setup_arch = gef_sbc610_setup_arch,
.init_IRQ = gef_sbc610_init_irq,
.show_cpuinfo = gef_sbc610_show_cpuinfo,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.time_init = mpc86xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};