linux_dsm_epyc7002/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
Florian Fainelli 806fd188ce net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
After commit bfcb813203 ("net: dsa:
configure the MTU for switch ports") my Lamobo R1 platform which uses
an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail
by rejecting a MTU of 1536. The reason for that is that the DMA
capabilities are not readable on this version of the IP, and there
is also no 'tx-fifo-depth' property being provided in Device Tree. The
property is documented as optional, and is not provided.

Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so
provide these values through platform data as an immediate fix until
various Device Tree sources get updated accordingly.

Fixes: eaf4fac478 ("net: stmmac: Do not accept invalid MTU values")
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-16 13:47:53 -07:00

194 lines
4.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer
*
* Copyright (C) 2013 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*/
#include <linux/stmmac.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/of_net.h>
#include <linux/regulator/consumer.h>
#include "stmmac_platform.h"
struct sunxi_priv_data {
phy_interface_t interface;
int clk_enabled;
struct clk *tx_clk;
struct regulator *regulator;
};
#define SUN7I_GMAC_GMII_RGMII_RATE 125000000
#define SUN7I_GMAC_MII_RATE 25000000
static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
{
struct sunxi_priv_data *gmac = priv;
int ret;
if (gmac->regulator) {
ret = regulator_enable(gmac->regulator);
if (ret)
return ret;
}
/* Set GMAC interface port mode
*
* The GMAC TX clock lines are configured by setting the clock
* rate, which then uses the auto-reparenting feature of the
* clock driver, and enabling/disabling the clock.
*/
if (phy_interface_mode_is_rgmii(gmac->interface)) {
clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE);
clk_prepare_enable(gmac->tx_clk);
gmac->clk_enabled = 1;
} else {
clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
ret = clk_prepare(gmac->tx_clk);
if (ret)
return ret;
}
return 0;
}
static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)
{
struct sunxi_priv_data *gmac = priv;
if (gmac->clk_enabled) {
clk_disable(gmac->tx_clk);
gmac->clk_enabled = 0;
}
clk_unprepare(gmac->tx_clk);
if (gmac->regulator)
regulator_disable(gmac->regulator);
}
static void sun7i_fix_speed(void *priv, unsigned int speed)
{
struct sunxi_priv_data *gmac = priv;
/* only GMII mode requires us to reconfigure the clock lines */
if (gmac->interface != PHY_INTERFACE_MODE_GMII)
return;
if (gmac->clk_enabled) {
clk_disable(gmac->tx_clk);
gmac->clk_enabled = 0;
}
clk_unprepare(gmac->tx_clk);
if (speed == 1000) {
clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE);
clk_prepare_enable(gmac->tx_clk);
gmac->clk_enabled = 1;
} else {
clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
clk_prepare(gmac->tx_clk);
}
}
static int sun7i_gmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
struct sunxi_priv_data *gmac;
struct device *dev = &pdev->dev;
int ret;
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
if (!gmac) {
ret = -ENOMEM;
goto err_remove_config_dt;
}
ret = of_get_phy_mode(dev->of_node, &gmac->interface);
if (ret && ret != -ENODEV) {
dev_err(dev, "Can't get phy-mode\n");
goto err_remove_config_dt;
}
gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
if (IS_ERR(gmac->tx_clk)) {
dev_err(dev, "could not get tx clock\n");
ret = PTR_ERR(gmac->tx_clk);
goto err_remove_config_dt;
}
/* Optional regulator for PHY */
gmac->regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(gmac->regulator)) {
if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
goto err_remove_config_dt;
}
dev_info(dev, "no regulator found\n");
gmac->regulator = NULL;
}
/* platform data specifying hardware features and callbacks.
* hardware features were copied from Allwinner drivers. */
plat_dat->tx_coe = 1;
plat_dat->has_gmac = true;
plat_dat->bsp_priv = gmac;
plat_dat->init = sun7i_gmac_init;
plat_dat->exit = sun7i_gmac_exit;
plat_dat->fix_mac_speed = sun7i_fix_speed;
plat_dat->tx_fifo_size = 4096;
plat_dat->rx_fifo_size = 16384;
ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
if (ret)
goto err_remove_config_dt;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (ret)
goto err_gmac_exit;
return 0;
err_gmac_exit:
sun7i_gmac_exit(pdev, plat_dat->bsp_priv);
err_remove_config_dt:
stmmac_remove_config_dt(pdev, plat_dat);
return ret;
}
static const struct of_device_id sun7i_dwmac_match[] = {
{ .compatible = "allwinner,sun7i-a20-gmac" },
{ }
};
MODULE_DEVICE_TABLE(of, sun7i_dwmac_match);
static struct platform_driver sun7i_dwmac_driver = {
.probe = sun7i_gmac_probe,
.remove = stmmac_pltfr_remove,
.driver = {
.name = "sun7i-dwmac",
.pm = &stmmac_pltfr_pm_ops,
.of_match_table = sun7i_dwmac_match,
},
};
module_platform_driver(sun7i_dwmac_driver);
MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
MODULE_DESCRIPTION("Allwinner sunxi DWMAC specific glue layer");
MODULE_LICENSE("GPL");