mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 08:04:58 +07:00
01ea0d4247
We've been moving all omap2+ based systems to boot in device tree only mode for a few years now. Only omap3 has legacy booting support remaining. Most omap3 boards already have related arch/arm/boot/*.dts* files for booting with device tree. As it seems this board only has minimal support upstreamed for the legacy booting and has not seen activity for on the mailing lists for a few years, let's attempt to remove the related legacy board-*.c file. I do not have this board, but it seems getting the same level of support with device tree based booting is mostly just configuring the .dts file. And there is no need to upgrade the boot loader as we can boot with appended DTB too. And most of the omap3 boards seem to be related to omap3-evm, and omap3beagleboard that are supported with device tree based booting. If somebody is using this board actively with the mainline kernel, please communicate this to the linux-omap mailing list so we can get the board booting with device tree based support. I can help some too getting the minimal device tree based booting going if help is needed. The reason for attempting to remove this board now is that I'd rather get the remaining omap3 legacy booting support into a known state where we at least have a .dts file being written for the remaining legacy boards. That is because for the next few merge cycles we can still revert this patch if absolutely necessary, but I'd rather not get suprised by missing .dts files at the point where we are ready to drop all remaining omap3 legacy booting support later on. Cc: Gregoire Gentil <gregoire@gentil.com> Cc: Radek Pilar <mrkva@mrkva.eu> Signed-off-by: Tony Lindgren <tony@atomide.com>
285 lines
11 KiB
Makefile
285 lines
11 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
|
|
-I$(srctree)/arch/arm/plat-omap/include
|
|
|
|
# Common support
|
|
obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
|
|
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
|
|
omap_device.o sram.o drm.o
|
|
|
|
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
|
|
omap_hwmod_common_data.o
|
|
clock-common = clock.o clock_common_data.o \
|
|
clkt_dpll.o clkt_clksel.o
|
|
secure-common = omap-smc.o omap-secure.o
|
|
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
|
|
obj-$(CONFIG_SOC_AM33XX) += $(hwmod-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common)
|
|
obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
|
|
|
|
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
|
|
obj-y += mcbsp.o
|
|
endif
|
|
|
|
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
|
|
obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
|
|
|
|
# SMP support ONLY available for OMAP4
|
|
|
|
smp-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
|
|
smp-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
|
|
omap-4-5-common = omap4-common.o omap-wakeupgen.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) sleep44xx.o
|
|
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o
|
|
obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common)
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y) sleep44xx.o
|
|
|
|
plus_sec := $(call as-instr,.arch_extension sec,+sec)
|
|
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
# Functions loaded to SRAM
|
|
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
|
|
|
|
AFLAGS_sram242x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram243x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
|
|
|
|
# Restart code (OMAP4/5 currently in omap4-common.c)
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o
|
|
obj-$(CONFIG_SOC_TI81XX) += ti81xx-restart.o
|
|
obj-$(CONFIG_SOC_AM33XX) += am33xx-restart.o
|
|
obj-$(CONFIG_SOC_AM43XX) += omap4-restart.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap4-restart.o
|
|
obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o
|
|
obj-$(CONFIG_SOC_DRA7XX) += omap4-restart.o
|
|
|
|
# Pin multiplexing
|
|
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
|
|
|
|
# SMS/SDRC
|
|
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
|
|
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
|
|
|
|
# OPP table initialization
|
|
ifeq ($(CONFIG_PM_OPP),y)
|
|
obj-y += opp.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
|
|
endif
|
|
|
|
# Power Management
|
|
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
|
|
|
|
ifeq ($(CONFIG_PM),y)
|
|
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
|
|
omap-4-5-pm-common = pm44xx.o omap-mpuss-lowpower.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common)
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-pm-common)
|
|
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
|
|
|
|
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
|
|
obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
|
|
|
|
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
|
|
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
endif
|
|
|
|
ifeq ($(CONFIG_CPU_IDLE),y)
|
|
obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
|
|
omap-4-5-idle-common = cpuidle44xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-idle-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-idle-common)
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-idle-common)
|
|
endif
|
|
|
|
# PRCM
|
|
obj-y += prm_common.o cm_common.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
|
|
omap-prcm-4-5-common = cminst44xx.o prm44xx.o \
|
|
prcm_mpu44xx.o prminst44xx.o \
|
|
vc44xx_data.o vp44xx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common)
|
|
am33xx-43xx-prcm-common += prm33xx.o cm33xx.o
|
|
obj-$(CONFIG_SOC_TI81XX) += $(am33xx-43xx-prcm-common)
|
|
obj-$(CONFIG_SOC_AM33XX) += $(am33xx-43xx-prcm-common)
|
|
obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \
|
|
$(am33xx-43xx-prcm-common)
|
|
|
|
# OMAP voltage domains
|
|
voltagedomain-common := voltage.o vc.o vp.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
|
|
obj-$(CONFIG_SOC_AM43XX) += $(voltagedomain-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += voltagedomains54xx_data.o
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(voltagedomain-common)
|
|
|
|
# OMAP powerdomain framework
|
|
powerdomain-common += powerdomain.o powerdomain-common.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
|
|
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
|
|
obj-$(CONFIG_SOC_AM43XX) += $(powerdomain-common)
|
|
obj-$(CONFIG_SOC_AM43XX) += powerdomains43xx_data.o
|
|
obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += powerdomains54xx_data.o
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(powerdomain-common)
|
|
obj-$(CONFIG_SOC_DRA7XX) += powerdomains7xx_data.o
|
|
|
|
# PRCM clockdomain control
|
|
clockdomain-common += clockdomain.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
|
|
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
|
|
obj-$(CONFIG_SOC_TI81XX) += $(clockdomain-common)
|
|
obj-$(CONFIG_SOC_TI81XX) += clockdomains81xx_data.o
|
|
obj-$(CONFIG_SOC_AM43XX) += $(clockdomain-common)
|
|
obj-$(CONFIG_SOC_AM43XX) += clockdomains43xx_data.o
|
|
obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += clockdomains54xx_data.o
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common)
|
|
obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
|
|
|
|
# Clock framework
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
|
|
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
|
|
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
|
|
obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
|
|
obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o dpll44xx.o
|
|
obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o
|
|
|
|
# OMAP2 clock rate set data (old "OPP" data)
|
|
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
|
|
|
|
# hwmod data
|
|
obj-y += omap_hwmod_common_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_43xx_data.o
|
|
obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
|
|
obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o
|
|
obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o
|
|
|
|
# EMU peripherals
|
|
obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
|
|
|
|
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
|
|
obj-y += $(iommu-m) $(iommu-y)
|
|
|
|
# OMAP2420 MSDI controller integration support ("MMC")
|
|
obj-$(CONFIG_SOC_OMAP2420) += msdi.o
|
|
|
|
# Specific board support
|
|
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o
|
|
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
|
|
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
|
|
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
|
|
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
|
|
obj-$(CONFIG_MACH_OVERO) += board-overo.o
|
|
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
|
|
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o
|
|
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
|
|
|
|
# Platform specific device init code
|
|
|
|
omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
|
|
omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
|
|
obj-y += $(omap-flash-y) $(omap-flash-m)
|
|
|
|
omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
|
|
obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
|
|
|
|
obj-y += usb-musb.o
|
|
obj-y += omap_phy_internal.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
|
|
obj-y += usb-host.o
|
|
|
|
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
|
|
obj-y += $(onenand-m) $(onenand-y)
|
|
|
|
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
|
|
obj-y += $(nand-m) $(nand-y)
|
|
|
|
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
|
|
obj-y += $(smsc911x-m) $(smsc911x-y)
|
|
ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
|
|
obj-y += hwspinlock.o
|
|
endif
|
|
|
|
obj-y += common-board-devices.o twl-common.o dss-common.o
|