linux_dsm_epyc7002/drivers/scsi/mpt3sas
Suganath Prabu df9a606184 scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA
Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.

E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.

Driver will set 63-bit DMA mask to ensure the above address will not be
used.

Cc: <stable@vger.kernel.org> # 5.1.20+
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 12:46:06 -04:00
..
mpi scsi: mpt3sas: Enable interrupt coalescing on high iops 2019-06-18 19:46:26 -04:00
Kconfig scsi: mpt3sas: Irq poll to avoid CPU hard lockups 2019-03-18 17:16:43 -04:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mpt3sas_base.c scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA 2019-07-30 12:46:06 -04:00
mpt3sas_base.h scsi: mpt3sas: Determine smp affinity on per HBA basis 2019-06-26 22:58:34 -04:00
mpt3sas_config.c scsi: mpt3sas: Enable interrupt coalescing on high iops 2019-06-18 19:46:26 -04:00
mpt3sas_ctl.c scsi: mpt3sas: use DEVICE_ATTR_{RO, RW} 2019-06-20 16:28:02 -04:00
mpt3sas_ctl.h scsi: mpt3sas: Increase event log buffer to support 24 port HBA's. 2018-05-08 00:34:20 -04:00
mpt3sas_debug.h mpt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry from Kconfig 2015-11-11 18:31:14 -05:00
mpt3sas_scsih.c scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs 2019-07-16 23:02:11 -04:00
mpt3sas_transport.c scsi: mpt3sas: function pointers of request descriptor 2019-06-18 19:46:25 -04:00
mpt3sas_trigger_diag.c scsi: mpt3sas: Convert uses of pr_<level> with MPT3SAS_FMT to ioc_<level> 2018-10-10 22:00:43 -04:00
mpt3sas_trigger_diag.h mpt2sas, mpt3sas: Update attribution language to Avago 2015-01-13 16:27:27 +01:00
mpt3sas_warpdrive.c scsi: mpt3sas: Convert uses of pr_<level> with MPT3SAS_FMT to ioc_<level> 2018-10-10 22:00:43 -04:00