mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
aa524b66c5
The e1000e_config_hwtstamp function was incorrectly resetting the SYSTIM registers every time the ioctl was being run. If you happened to be running ptp4l and lost the PTP connect (removing cable, or blocking the UDP traffic for example), then ptp4l will eventually perform a restart which involves re-requesting timestamp settings. In e1000e this has the unfortunate and incorrect result of resetting SYSTIME to the kernel time. Since kernel time is usually in UTC, and PTP time is in TAI, this results in the leap second being re-applied. Fix this by extracting the SYSTIME reset out into its own function, e1000e_ptp_reset, which we call during reset to restore the hardware registers. This function will (a) restart the timecounter based on the new system time, (b) restore the previous PPB setting, and (c) restore the previous hwtstamp settings. In order to perform (b), I had to modify the adjfreq ptp function pointer to store the old delta each time it is called. This also has the side effect of restoring the correct base timinca register correctly. The driver does not need to explicitly zero the ptp_delta variable since the entire adapter structure comes zero-initialized. Reported-by: Brian Walsh <brian@walsh.ws> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Brian Walsh <brian@walsh.ws> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
||
|---|---|---|
| .. | ||
| 80003es2lan.c | ||
| 80003es2lan.h | ||
| 82571.c | ||
| 82571.h | ||
| defines.h | ||
| e1000.h | ||
| ethtool.c | ||
| hw.h | ||
| ich8lan.c | ||
| ich8lan.h | ||
| mac.c | ||
| mac.h | ||
| Makefile | ||
| manage.c | ||
| manage.h | ||
| netdev.c | ||
| nvm.c | ||
| nvm.h | ||
| param.c | ||
| phy.c | ||
| phy.h | ||
| ptp.c | ||
| regs.h | ||