mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 20:47:43 +07:00
070c32223a
When working on a problem with some flash chips that lock up during write-buffer operations, I think there may be a bug in the linux handling of chips using cfi_cmdset_0002.c. The datasheets I have found for a number of these chips all specify that when aborting a write-buffer command, it is not enough to use the standard reset. Rather a "write-to-buffer-reset command" is needed. This command is quite similar for all chips, the main variance seem to be if the final 0xF0 can go to any address or must go to addr_unlock1. The bug is then in the recovery handling when timing out at the end of do_write_buffer, where using the normal reset command is not sufficient. Without this change, if the write-buffer command fails then any following operations on the flash also fail. Signed-off-by: Harald Nordgard-Hansen <hhansen@pvv.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
||
---|---|---|
.. | ||
cfi_cmdset_0001.c | ||
cfi_cmdset_0002.c | ||
cfi_cmdset_0020.c | ||
cfi_probe.c | ||
cfi_util.c | ||
chipreg.c | ||
fwh_lock.h | ||
gen_probe.c | ||
jedec_probe.c | ||
Kconfig | ||
Makefile | ||
map_absent.c | ||
map_ram.c | ||
map_rom.c |