mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 17:46:41 +07:00
aa2f4b16f8
OMAP5 ES1.0 was intended as a test chip and has major register level differences w.r.t ES2.0 revision of the chip. All register defines, dts support has been solely added for ES2.0 version of the chip. Further, all ES1.0 chips and platforms are supposed to have been removed from circulation. Hence, there is no need to further retain any resemblence of ES1.0 support in id detection code. Remove the omap_revision handling and BUG() instead to prevent folks who mistakenly try an older unsupported chip and report bogus errors. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
686 lines
16 KiB
C
686 lines
16 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/id.c
|
|
*
|
|
* OMAP2 CPU identification code
|
|
*
|
|
* Copyright (C) 2005 Nokia Corporation
|
|
* Written by Tony Lindgren <tony@atomide.com>
|
|
*
|
|
* Copyright (C) 2009-11 Texas Instruments
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
#ifdef CONFIG_SOC_BUS
|
|
#include <linux/sys_soc.h>
|
|
#endif
|
|
|
|
#include <asm/cputype.h>
|
|
|
|
#include "common.h"
|
|
|
|
#include "id.h"
|
|
|
|
#include "soc.h"
|
|
#include "control.h"
|
|
|
|
#define OMAP4_SILICON_TYPE_STANDARD 0x01
|
|
#define OMAP4_SILICON_TYPE_PERFORMANCE 0x02
|
|
|
|
#define OMAP_SOC_MAX_NAME_LENGTH 16
|
|
|
|
static unsigned int omap_revision;
|
|
static char soc_name[OMAP_SOC_MAX_NAME_LENGTH];
|
|
static char soc_rev[OMAP_SOC_MAX_NAME_LENGTH];
|
|
u32 omap_features;
|
|
|
|
unsigned int omap_rev(void)
|
|
{
|
|
return omap_revision;
|
|
}
|
|
EXPORT_SYMBOL(omap_rev);
|
|
|
|
int omap_type(void)
|
|
{
|
|
u32 val = 0;
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
|
|
} else if (soc_is_am33xx() || soc_is_am43xx()) {
|
|
val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
|
|
} else if (cpu_is_omap34xx()) {
|
|
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
|
|
} else if (cpu_is_omap44xx()) {
|
|
val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
|
|
} else if (soc_is_omap54xx() || soc_is_dra7xx()) {
|
|
val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
|
|
val &= OMAP5_DEVICETYPE_MASK;
|
|
val >>= 6;
|
|
goto out;
|
|
} else {
|
|
pr_err("Cannot detect omap type!\n");
|
|
goto out;
|
|
}
|
|
|
|
val &= OMAP2_DEVICETYPE_MASK;
|
|
val >>= 8;
|
|
|
|
out:
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL(omap_type);
|
|
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
#define OMAP_TAP_IDCODE 0x0204
|
|
#define OMAP_TAP_DIE_ID_0 0x0218
|
|
#define OMAP_TAP_DIE_ID_1 0x021C
|
|
#define OMAP_TAP_DIE_ID_2 0x0220
|
|
#define OMAP_TAP_DIE_ID_3 0x0224
|
|
|
|
#define OMAP_TAP_DIE_ID_44XX_0 0x0200
|
|
#define OMAP_TAP_DIE_ID_44XX_1 0x0208
|
|
#define OMAP_TAP_DIE_ID_44XX_2 0x020c
|
|
#define OMAP_TAP_DIE_ID_44XX_3 0x0210
|
|
|
|
#define read_tap_reg(reg) __raw_readl(tap_base + (reg))
|
|
|
|
struct omap_id {
|
|
u16 hawkeye; /* Silicon type (Hawkeye id) */
|
|
u8 dev; /* Device type from production_id reg */
|
|
u32 type; /* Combined type id copied to omap_revision */
|
|
};
|
|
|
|
/* Register values to detect the OMAP version */
|
|
static struct omap_id omap_ids[] __initdata = {
|
|
{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
|
|
{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
|
|
{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
|
|
{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
|
|
{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
|
|
{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
|
|
};
|
|
|
|
static void __iomem *tap_base;
|
|
static u16 tap_prod_id;
|
|
|
|
void omap_get_die_id(struct omap_die_id *odi)
|
|
{
|
|
if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
|
|
odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
|
|
odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
|
|
odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
|
|
odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_3);
|
|
|
|
return;
|
|
}
|
|
odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0);
|
|
odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1);
|
|
odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2);
|
|
odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
|
|
}
|
|
|
|
void __init omap2xxx_check_revision(void)
|
|
{
|
|
int i, j;
|
|
u32 idcode, prod_id;
|
|
u16 hawkeye;
|
|
u8 dev_type, rev;
|
|
struct omap_die_id odi;
|
|
|
|
idcode = read_tap_reg(OMAP_TAP_IDCODE);
|
|
prod_id = read_tap_reg(tap_prod_id);
|
|
hawkeye = (idcode >> 12) & 0xffff;
|
|
rev = (idcode >> 28) & 0x0f;
|
|
dev_type = (prod_id >> 16) & 0x0f;
|
|
omap_get_die_id(&odi);
|
|
|
|
pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
|
|
idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
|
|
pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
|
|
pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
|
|
odi.id_1, (odi.id_1 >> 28) & 0xf);
|
|
pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
|
|
pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
|
|
pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
|
|
prod_id, dev_type);
|
|
|
|
/* Check hawkeye ids */
|
|
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
|
|
if (hawkeye == omap_ids[i].hawkeye)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(omap_ids)) {
|
|
printk(KERN_ERR "Unknown OMAP CPU id\n");
|
|
return;
|
|
}
|
|
|
|
for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
|
|
if (dev_type == omap_ids[j].dev)
|
|
break;
|
|
}
|
|
|
|
if (j == ARRAY_SIZE(omap_ids)) {
|
|
pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
|
|
omap_ids[i].type >> 16);
|
|
j = i;
|
|
}
|
|
|
|
sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
|
|
sprintf(soc_rev, "ES%x", (omap_rev() >> 12) & 0xf);
|
|
|
|
pr_info("%s", soc_name);
|
|
if ((omap_rev() >> 8) & 0x0f)
|
|
pr_info("%s", soc_rev);
|
|
pr_info("\n");
|
|
}
|
|
|
|
#define OMAP3_SHOW_FEATURE(feat) \
|
|
if (omap3_has_ ##feat()) \
|
|
printk(#feat" ");
|
|
|
|
static void __init omap3_cpuinfo(void)
|
|
{
|
|
const char *cpu_name;
|
|
|
|
/*
|
|
* OMAP3430 and OMAP3530 are assumed to be same.
|
|
*
|
|
* OMAP3525, OMAP3515 and OMAP3503 can be detected only based
|
|
* on available features. Upon detection, update the CPU id
|
|
* and CPU class bits.
|
|
*/
|
|
if (cpu_is_omap3630()) {
|
|
cpu_name = "OMAP3630";
|
|
} else if (soc_is_am35xx()) {
|
|
cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
|
|
} else if (cpu_is_ti816x()) {
|
|
cpu_name = "TI816X";
|
|
} else if (soc_is_am335x()) {
|
|
cpu_name = "AM335X";
|
|
} else if (soc_is_am437x()) {
|
|
cpu_name = "AM437x";
|
|
} else if (cpu_is_ti814x()) {
|
|
cpu_name = "TI814X";
|
|
} else if (omap3_has_iva() && omap3_has_sgx()) {
|
|
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
|
|
cpu_name = "OMAP3430/3530";
|
|
} else if (omap3_has_iva()) {
|
|
cpu_name = "OMAP3525";
|
|
} else if (omap3_has_sgx()) {
|
|
cpu_name = "OMAP3515";
|
|
} else {
|
|
cpu_name = "OMAP3503";
|
|
}
|
|
|
|
sprintf(soc_name, "%s", cpu_name);
|
|
|
|
/* Print verbose information */
|
|
pr_info("%s %s (", soc_name, soc_rev);
|
|
|
|
OMAP3_SHOW_FEATURE(l2cache);
|
|
OMAP3_SHOW_FEATURE(iva);
|
|
OMAP3_SHOW_FEATURE(sgx);
|
|
OMAP3_SHOW_FEATURE(neon);
|
|
OMAP3_SHOW_FEATURE(isp);
|
|
OMAP3_SHOW_FEATURE(192mhz_clk);
|
|
|
|
printk(")\n");
|
|
}
|
|
|
|
#define OMAP3_CHECK_FEATURE(status,feat) \
|
|
if (((status & OMAP3_ ##feat## _MASK) \
|
|
>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
|
|
omap_features |= OMAP3_HAS_ ##feat; \
|
|
}
|
|
|
|
void __init omap3xxx_check_features(void)
|
|
{
|
|
u32 status;
|
|
|
|
omap_features = 0;
|
|
|
|
status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
|
|
|
|
OMAP3_CHECK_FEATURE(status, L2CACHE);
|
|
OMAP3_CHECK_FEATURE(status, IVA);
|
|
OMAP3_CHECK_FEATURE(status, SGX);
|
|
OMAP3_CHECK_FEATURE(status, NEON);
|
|
OMAP3_CHECK_FEATURE(status, ISP);
|
|
if (cpu_is_omap3630())
|
|
omap_features |= OMAP3_HAS_192MHZ_CLK;
|
|
if (cpu_is_omap3430() || cpu_is_omap3630())
|
|
omap_features |= OMAP3_HAS_IO_WAKEUP;
|
|
if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
|
|
omap_rev() == OMAP3430_REV_ES3_1_2)
|
|
omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
|
|
|
|
omap_features |= OMAP3_HAS_SDRC;
|
|
|
|
/*
|
|
* am35x fixups:
|
|
* - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
|
|
* reserved and therefore return 0 when read. Unfortunately,
|
|
* OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
|
|
* mean that a feature is present even though it isn't so clear
|
|
* the incorrectly set feature bits.
|
|
*/
|
|
if (soc_is_am35xx())
|
|
omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
|
|
|
|
/*
|
|
* TODO: Get additional info (where applicable)
|
|
* e.g. Size of L2 cache.
|
|
*/
|
|
|
|
omap3_cpuinfo();
|
|
}
|
|
|
|
void __init omap4xxx_check_features(void)
|
|
{
|
|
u32 si_type;
|
|
|
|
si_type =
|
|
(read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03;
|
|
|
|
if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE)
|
|
omap_features = OMAP4_HAS_PERF_SILICON;
|
|
}
|
|
|
|
void __init ti81xx_check_features(void)
|
|
{
|
|
omap_features = OMAP3_HAS_NEON;
|
|
omap3_cpuinfo();
|
|
}
|
|
|
|
void __init am33xx_check_features(void)
|
|
{
|
|
u32 status;
|
|
|
|
omap_features = OMAP3_HAS_NEON;
|
|
|
|
status = omap_ctrl_readl(AM33XX_DEV_FEATURE);
|
|
if (status & AM33XX_SGX_MASK)
|
|
omap_features |= OMAP3_HAS_SGX;
|
|
|
|
omap3_cpuinfo();
|
|
}
|
|
|
|
void __init omap3xxx_check_revision(void)
|
|
{
|
|
const char *cpu_rev;
|
|
u32 cpuid, idcode;
|
|
u16 hawkeye;
|
|
u8 rev;
|
|
|
|
/*
|
|
* We cannot access revision registers on ES1.0.
|
|
* If the processor type is Cortex-A8 and the revision is 0x0
|
|
* it means its Cortex r0p0 which is 3430 ES1.0.
|
|
*/
|
|
cpuid = read_cpuid_id();
|
|
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
|
|
omap_revision = OMAP3430_REV_ES1_0;
|
|
cpu_rev = "1.0";
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Detection for 34xx ES2.0 and above can be done with just
|
|
* hawkeye and rev. See TRM 1.5.2 Device Identification.
|
|
* Note that rev does not map directly to our defined processor
|
|
* revision numbers as ES1.0 uses value 0.
|
|
*/
|
|
idcode = read_tap_reg(OMAP_TAP_IDCODE);
|
|
hawkeye = (idcode >> 12) & 0xffff;
|
|
rev = (idcode >> 28) & 0xff;
|
|
|
|
switch (hawkeye) {
|
|
case 0xb7ae:
|
|
/* Handle 34xx/35xx devices */
|
|
switch (rev) {
|
|
case 0: /* Take care of early samples */
|
|
case 1:
|
|
omap_revision = OMAP3430_REV_ES2_0;
|
|
cpu_rev = "2.0";
|
|
break;
|
|
case 2:
|
|
omap_revision = OMAP3430_REV_ES2_1;
|
|
cpu_rev = "2.1";
|
|
break;
|
|
case 3:
|
|
omap_revision = OMAP3430_REV_ES3_0;
|
|
cpu_rev = "3.0";
|
|
break;
|
|
case 4:
|
|
omap_revision = OMAP3430_REV_ES3_1;
|
|
cpu_rev = "3.1";
|
|
break;
|
|
case 7:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
/* Use the latest known revision as default */
|
|
omap_revision = OMAP3430_REV_ES3_1_2;
|
|
cpu_rev = "3.1.2";
|
|
}
|
|
break;
|
|
case 0xb868:
|
|
/*
|
|
* Handle OMAP/AM 3505/3517 devices
|
|
*
|
|
* Set the device to be OMAP3517 here. Actual device
|
|
* is identified later based on the features.
|
|
*/
|
|
switch (rev) {
|
|
case 0:
|
|
omap_revision = AM35XX_REV_ES1_0;
|
|
cpu_rev = "1.0";
|
|
break;
|
|
case 1:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
omap_revision = AM35XX_REV_ES1_1;
|
|
cpu_rev = "1.1";
|
|
}
|
|
break;
|
|
case 0xb891:
|
|
/* Handle 36xx devices */
|
|
|
|
switch(rev) {
|
|
case 0: /* Take care of early samples */
|
|
omap_revision = OMAP3630_REV_ES1_0;
|
|
cpu_rev = "1.0";
|
|
break;
|
|
case 1:
|
|
omap_revision = OMAP3630_REV_ES1_1;
|
|
cpu_rev = "1.1";
|
|
break;
|
|
case 2:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
omap_revision = OMAP3630_REV_ES1_2;
|
|
cpu_rev = "1.2";
|
|
}
|
|
break;
|
|
case 0xb81e:
|
|
switch (rev) {
|
|
case 0:
|
|
omap_revision = TI8168_REV_ES1_0;
|
|
cpu_rev = "1.0";
|
|
break;
|
|
case 1:
|
|
omap_revision = TI8168_REV_ES1_1;
|
|
cpu_rev = "1.1";
|
|
break;
|
|
case 2:
|
|
omap_revision = TI8168_REV_ES2_0;
|
|
cpu_rev = "2.0";
|
|
break;
|
|
case 3:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
omap_revision = TI8168_REV_ES2_1;
|
|
cpu_rev = "2.1";
|
|
}
|
|
break;
|
|
case 0xb944:
|
|
switch (rev) {
|
|
case 0:
|
|
omap_revision = AM335X_REV_ES1_0;
|
|
cpu_rev = "1.0";
|
|
break;
|
|
case 1:
|
|
omap_revision = AM335X_REV_ES2_0;
|
|
cpu_rev = "2.0";
|
|
break;
|
|
case 2:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
omap_revision = AM335X_REV_ES2_1;
|
|
cpu_rev = "2.1";
|
|
break;
|
|
}
|
|
break;
|
|
case 0xb98c:
|
|
omap_revision = AM437X_REV_ES1_0;
|
|
cpu_rev = "1.0";
|
|
break;
|
|
case 0xb8f2:
|
|
switch (rev) {
|
|
case 0:
|
|
/* FALLTHROUGH */
|
|
case 1:
|
|
omap_revision = TI8148_REV_ES1_0;
|
|
cpu_rev = "1.0";
|
|
break;
|
|
case 2:
|
|
omap_revision = TI8148_REV_ES2_0;
|
|
cpu_rev = "2.0";
|
|
break;
|
|
case 3:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
omap_revision = TI8148_REV_ES2_1;
|
|
cpu_rev = "2.1";
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
/* Unknown default to latest silicon rev as default */
|
|
omap_revision = OMAP3630_REV_ES1_2;
|
|
cpu_rev = "1.2";
|
|
pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
|
|
}
|
|
sprintf(soc_rev, "ES%s", cpu_rev);
|
|
}
|
|
|
|
void __init omap4xxx_check_revision(void)
|
|
{
|
|
u32 idcode;
|
|
u16 hawkeye;
|
|
u8 rev;
|
|
|
|
/*
|
|
* The IC rev detection is done with hawkeye and rev.
|
|
* Note that rev does not map directly to defined processor
|
|
* revision numbers as ES1.0 uses value 0.
|
|
*/
|
|
idcode = read_tap_reg(OMAP_TAP_IDCODE);
|
|
hawkeye = (idcode >> 12) & 0xffff;
|
|
rev = (idcode >> 28) & 0xf;
|
|
|
|
/*
|
|
* Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
|
|
* Use ARM register to detect the correct ES version
|
|
*/
|
|
if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) {
|
|
idcode = read_cpuid_id();
|
|
rev = (idcode & 0xf) - 1;
|
|
}
|
|
|
|
switch (hawkeye) {
|
|
case 0xb852:
|
|
switch (rev) {
|
|
case 0:
|
|
omap_revision = OMAP4430_REV_ES1_0;
|
|
break;
|
|
case 1:
|
|
default:
|
|
omap_revision = OMAP4430_REV_ES2_0;
|
|
}
|
|
break;
|
|
case 0xb95c:
|
|
switch (rev) {
|
|
case 3:
|
|
omap_revision = OMAP4430_REV_ES2_1;
|
|
break;
|
|
case 4:
|
|
omap_revision = OMAP4430_REV_ES2_2;
|
|
break;
|
|
case 6:
|
|
default:
|
|
omap_revision = OMAP4430_REV_ES2_3;
|
|
}
|
|
break;
|
|
case 0xb94e:
|
|
switch (rev) {
|
|
case 0:
|
|
omap_revision = OMAP4460_REV_ES1_0;
|
|
break;
|
|
case 2:
|
|
default:
|
|
omap_revision = OMAP4460_REV_ES1_1;
|
|
break;
|
|
}
|
|
break;
|
|
case 0xb975:
|
|
switch (rev) {
|
|
case 0:
|
|
default:
|
|
omap_revision = OMAP4470_REV_ES1_0;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
/* Unknown default to latest silicon rev as default */
|
|
omap_revision = OMAP4430_REV_ES2_3;
|
|
}
|
|
|
|
sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
|
|
sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
|
|
(omap_rev() >> 8) & 0xf);
|
|
pr_info("%s %s\n", soc_name, soc_rev);
|
|
}
|
|
|
|
void __init omap5xxx_check_revision(void)
|
|
{
|
|
u32 idcode;
|
|
u16 hawkeye;
|
|
u8 rev;
|
|
|
|
idcode = read_tap_reg(OMAP_TAP_IDCODE);
|
|
hawkeye = (idcode >> 12) & 0xffff;
|
|
rev = (idcode >> 28) & 0xff;
|
|
switch (hawkeye) {
|
|
case 0xb942:
|
|
switch (rev) {
|
|
case 0:
|
|
/* No support for ES1.0 Test chip */
|
|
BUG();
|
|
case 1:
|
|
default:
|
|
omap_revision = OMAP5430_REV_ES2_0;
|
|
}
|
|
break;
|
|
|
|
case 0xb998:
|
|
switch (rev) {
|
|
case 0:
|
|
/* No support for ES1.0 Test chip */
|
|
BUG();
|
|
case 1:
|
|
default:
|
|
omap_revision = OMAP5432_REV_ES2_0;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
/* Unknown default to latest silicon rev as default*/
|
|
omap_revision = OMAP5430_REV_ES2_0;
|
|
}
|
|
|
|
sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
|
|
sprintf(soc_rev, "ES%d.0", (omap_rev() >> 12) & 0xf);
|
|
|
|
pr_info("%s %s\n", soc_name, soc_rev);
|
|
}
|
|
|
|
/*
|
|
* Set up things for map_io and processor detection later on. Gets called
|
|
* pretty much first thing from board init. For multi-omap, this gets
|
|
* cpu_is_omapxxxx() working accurately enough for map_io. Then we'll try to
|
|
* detect the exact revision later on in omap2_detect_revision() once map_io
|
|
* is done.
|
|
*/
|
|
void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
|
|
{
|
|
omap_revision = class;
|
|
tap_base = tap;
|
|
|
|
/* XXX What is this intended to do? */
|
|
if (cpu_is_omap34xx())
|
|
tap_prod_id = 0x0210;
|
|
else
|
|
tap_prod_id = 0x0208;
|
|
}
|
|
|
|
#ifdef CONFIG_SOC_BUS
|
|
|
|
static const char * const omap_types[] = {
|
|
[OMAP2_DEVICE_TYPE_TEST] = "TST",
|
|
[OMAP2_DEVICE_TYPE_EMU] = "EMU",
|
|
[OMAP2_DEVICE_TYPE_SEC] = "HS",
|
|
[OMAP2_DEVICE_TYPE_GP] = "GP",
|
|
[OMAP2_DEVICE_TYPE_BAD] = "BAD",
|
|
};
|
|
|
|
static const char * __init omap_get_family(void)
|
|
{
|
|
if (cpu_is_omap24xx())
|
|
return kasprintf(GFP_KERNEL, "OMAP2");
|
|
else if (cpu_is_omap34xx())
|
|
return kasprintf(GFP_KERNEL, "OMAP3");
|
|
else if (cpu_is_omap44xx())
|
|
return kasprintf(GFP_KERNEL, "OMAP4");
|
|
else if (soc_is_omap54xx())
|
|
return kasprintf(GFP_KERNEL, "OMAP5");
|
|
else
|
|
return kasprintf(GFP_KERNEL, "Unknown");
|
|
}
|
|
|
|
static ssize_t omap_get_type(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return sprintf(buf, "%s\n", omap_types[omap_type()]);
|
|
}
|
|
|
|
static struct device_attribute omap_soc_attr =
|
|
__ATTR(type, S_IRUGO, omap_get_type, NULL);
|
|
|
|
void __init omap_soc_device_init(void)
|
|
{
|
|
struct device *parent;
|
|
struct soc_device *soc_dev;
|
|
struct soc_device_attribute *soc_dev_attr;
|
|
|
|
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
|
|
if (!soc_dev_attr)
|
|
return;
|
|
|
|
soc_dev_attr->machine = soc_name;
|
|
soc_dev_attr->family = omap_get_family();
|
|
soc_dev_attr->revision = soc_rev;
|
|
|
|
soc_dev = soc_device_register(soc_dev_attr);
|
|
if (IS_ERR(soc_dev)) {
|
|
kfree(soc_dev_attr);
|
|
return;
|
|
}
|
|
|
|
parent = soc_device_to_device(soc_dev);
|
|
device_create_file(parent, &omap_soc_attr);
|
|
}
|
|
#endif /* CONFIG_SOC_BUS */
|