linux_dsm_epyc7002/fs/fs-writeback.c
Eric Biggers 13ef6bccab fs: fix lazytime expiration handling in __writeback_single_inode()
commit 1e249cb5b7fc09ff216aa5a12f6c302e434e88f9 upstream.

When lazytime is enabled and an inode is being written due to its
in-memory updated timestamps having expired, either due to a sync() or
syncfs() system call or due to dirtytime_expire_interval having elapsed,
the VFS needs to inform the filesystem so that the filesystem can copy
the inode's timestamps out to the on-disk data structures.

This is done by __writeback_single_inode() calling
mark_inode_dirty_sync(), which then calls ->dirty_inode(I_DIRTY_SYNC).

However, this occurs after __writeback_single_inode() has already
cleared the dirty flags from ->i_state.  This causes two bugs:

- mark_inode_dirty_sync() redirties the inode, causing it to remain
  dirty.  This wastefully causes the inode to be written twice.  But
  more importantly, it breaks cases where sync_filesystem() is expected
  to clean dirty inodes.  This includes the FS_IOC_REMOVE_ENCRYPTION_KEY
  ioctl (as reported at
  https://lore.kernel.org/r/20200306004555.GB225345@gmail.com), as well
  as possibly filesystem freezing (freeze_super()).

- Since ->i_state doesn't contain I_DIRTY_TIME when ->dirty_inode() is
  called from __writeback_single_inode() for lazytime expiration,
  xfs_fs_dirty_inode() ignores the notification.  (XFS only cares about
  lazytime expirations, and it assumes that i_state will contain
  I_DIRTY_TIME during those.)  Therefore, lazy timestamps aren't
  persisted by sync(), syncfs(), or dirtytime_expire_interval on XFS.

Fix this by moving the call to mark_inode_dirty_sync() to earlier in
__writeback_single_inode(), before the dirty flags are cleared from
i_state.  This makes filesystems be properly notified of the timestamp
expiration, and it avoids incorrectly redirtying the inode.

This fixes xfstest generic/580 (which tests
FS_IOC_REMOVE_ENCRYPTION_KEY) when run on ext4 or f2fs with lazytime
enabled.  It also fixes the new lazytime xfstest I've proposed, which
reproduces the above-mentioned XFS bug
(https://lore.kernel.org/r/20210105005818.92978-1-ebiggers@kernel.org).

Alternatively, we could call ->dirty_inode(I_DIRTY_SYNC) directly.  But
due to the introduction of I_SYNC_QUEUED, mark_inode_dirty_sync() is the
right thing to do because mark_inode_dirty_sync() now knows not to move
the inode to a writeback list if it is currently queued for sync.

Fixes: 0ae45f63d4 ("vfs: add support for a lazytime mount option")
Cc: stable@vger.kernel.org
Depends-on: 5afced3bf2 ("writeback: Avoid skipping inode writeback")
Link: https://lore.kernel.org/r/20210112190253.64307-2-ebiggers@kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 11:54:53 +01:00

2631 lines
75 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* fs/fs-writeback.c
*
* Copyright (C) 2002, Linus Torvalds.
*
* Contains all the functions related to writing back and waiting
* upon dirty inodes against superblocks, and writing back dirty
* pages against inodes. ie: data writeback. Writeout of the
* inode itself is not handled here.
*
* 10Apr2002 Andrew Morton
* Split out of fs/inode.c
* Additions for address_space-based writeback
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/kthread.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/tracepoint.h>
#include <linux/device.h>
#include <linux/memcontrol.h>
#include "internal.h"
/*
* 4MB minimal write chunk size
*/
#define MIN_WRITEBACK_PAGES (4096UL >> (PAGE_SHIFT - 10))
/*
* Passed into wb_writeback(), essentially a subset of writeback_control
*/
struct wb_writeback_work {
long nr_pages;
struct super_block *sb;
enum writeback_sync_modes sync_mode;
unsigned int tagged_writepages:1;
unsigned int for_kupdate:1;
unsigned int range_cyclic:1;
unsigned int for_background:1;
unsigned int for_sync:1; /* sync(2) WB_SYNC_ALL writeback */
unsigned int auto_free:1; /* free on completion */
enum wb_reason reason; /* why was writeback initiated? */
struct list_head list; /* pending work list */
struct wb_completion *done; /* set if the caller waits */
};
/*
* If an inode is constantly having its pages dirtied, but then the
* updates stop dirtytime_expire_interval seconds in the past, it's
* possible for the worst case time between when an inode has its
* timestamps updated and when they finally get written out to be two
* dirtytime_expire_intervals. We set the default to 12 hours (in
* seconds), which means most of the time inodes will have their
* timestamps written to disk after 12 hours, but in the worst case a
* few inodes might not their timestamps updated for 24 hours.
*/
unsigned int dirtytime_expire_interval = 12 * 60 * 60;
static inline struct inode *wb_inode(struct list_head *head)
{
return list_entry(head, struct inode, i_io_list);
}
/*
* Include the creation of the trace points after defining the
* wb_writeback_work structure and inline functions so that the definition
* remains local to this file.
*/
#define CREATE_TRACE_POINTS
#include <trace/events/writeback.h>
EXPORT_TRACEPOINT_SYMBOL_GPL(wbc_writepage);
static bool wb_io_lists_populated(struct bdi_writeback *wb)
{
if (wb_has_dirty_io(wb)) {
return false;
} else {
set_bit(WB_has_dirty_io, &wb->state);
WARN_ON_ONCE(!wb->avg_write_bandwidth);
atomic_long_add(wb->avg_write_bandwidth,
&wb->bdi->tot_write_bandwidth);
return true;
}
}
static void wb_io_lists_depopulated(struct bdi_writeback *wb)
{
if (wb_has_dirty_io(wb) && list_empty(&wb->b_dirty) &&
list_empty(&wb->b_io) && list_empty(&wb->b_more_io)) {
clear_bit(WB_has_dirty_io, &wb->state);
WARN_ON_ONCE(atomic_long_sub_return(wb->avg_write_bandwidth,
&wb->bdi->tot_write_bandwidth) < 0);
}
}
/**
* inode_io_list_move_locked - move an inode onto a bdi_writeback IO list
* @inode: inode to be moved
* @wb: target bdi_writeback
* @head: one of @wb->b_{dirty|io|more_io|dirty_time}
*
* Move @inode->i_io_list to @list of @wb and set %WB_has_dirty_io.
* Returns %true if @inode is the first occupant of the !dirty_time IO
* lists; otherwise, %false.
*/
static bool inode_io_list_move_locked(struct inode *inode,
struct bdi_writeback *wb,
struct list_head *head)
{
assert_spin_locked(&wb->list_lock);
list_move(&inode->i_io_list, head);
/* dirty_time doesn't count as dirty_io until expiration */
if (head != &wb->b_dirty_time)
return wb_io_lists_populated(wb);
wb_io_lists_depopulated(wb);
return false;
}
/**
* inode_io_list_del_locked - remove an inode from its bdi_writeback IO list
* @inode: inode to be removed
* @wb: bdi_writeback @inode is being removed from
*
* Remove @inode which may be on one of @wb->b_{dirty|io|more_io} lists and
* clear %WB_has_dirty_io if all are empty afterwards.
*/
static void inode_io_list_del_locked(struct inode *inode,
struct bdi_writeback *wb)
{
assert_spin_locked(&wb->list_lock);
assert_spin_locked(&inode->i_lock);
inode->i_state &= ~I_SYNC_QUEUED;
list_del_init(&inode->i_io_list);
wb_io_lists_depopulated(wb);
}
static void wb_wakeup(struct bdi_writeback *wb)
{
spin_lock_bh(&wb->work_lock);
if (test_bit(WB_registered, &wb->state))
mod_delayed_work(bdi_wq, &wb->dwork, 0);
spin_unlock_bh(&wb->work_lock);
}
static void finish_writeback_work(struct bdi_writeback *wb,
struct wb_writeback_work *work)
{
struct wb_completion *done = work->done;
if (work->auto_free)
kfree(work);
if (done) {
wait_queue_head_t *waitq = done->waitq;
/* @done can't be accessed after the following dec */
if (atomic_dec_and_test(&done->cnt))
wake_up_all(waitq);
}
}
static void wb_queue_work(struct bdi_writeback *wb,
struct wb_writeback_work *work)
{
trace_writeback_queue(wb, work);
if (work->done)
atomic_inc(&work->done->cnt);
spin_lock_bh(&wb->work_lock);
if (test_bit(WB_registered, &wb->state)) {
list_add_tail(&work->list, &wb->work_list);
mod_delayed_work(bdi_wq, &wb->dwork, 0);
} else
finish_writeback_work(wb, work);
spin_unlock_bh(&wb->work_lock);
}
/**
* wb_wait_for_completion - wait for completion of bdi_writeback_works
* @done: target wb_completion
*
* Wait for one or more work items issued to @bdi with their ->done field
* set to @done, which should have been initialized with
* DEFINE_WB_COMPLETION(). This function returns after all such work items
* are completed. Work items which are waited upon aren't freed
* automatically on completion.
*/
void wb_wait_for_completion(struct wb_completion *done)
{
atomic_dec(&done->cnt); /* put down the initial count */
wait_event(*done->waitq, !atomic_read(&done->cnt));
}
#ifdef CONFIG_CGROUP_WRITEBACK
/*
* Parameters for foreign inode detection, see wbc_detach_inode() to see
* how they're used.
*
* These paramters are inherently heuristical as the detection target
* itself is fuzzy. All we want to do is detaching an inode from the
* current owner if it's being written to by some other cgroups too much.
*
* The current cgroup writeback is built on the assumption that multiple
* cgroups writing to the same inode concurrently is very rare and a mode
* of operation which isn't well supported. As such, the goal is not
* taking too long when a different cgroup takes over an inode while
* avoiding too aggressive flip-flops from occasional foreign writes.
*
* We record, very roughly, 2s worth of IO time history and if more than
* half of that is foreign, trigger the switch. The recording is quantized
* to 16 slots. To avoid tiny writes from swinging the decision too much,
* writes smaller than 1/8 of avg size are ignored.
*/
#define WB_FRN_TIME_SHIFT 13 /* 1s = 2^13, upto 8 secs w/ 16bit */
#define WB_FRN_TIME_AVG_SHIFT 3 /* avg = avg * 7/8 + new * 1/8 */
#define WB_FRN_TIME_CUT_DIV 8 /* ignore rounds < avg / 8 */
#define WB_FRN_TIME_PERIOD (2 * (1 << WB_FRN_TIME_SHIFT)) /* 2s */
#define WB_FRN_HIST_SLOTS 16 /* inode->i_wb_frn_history is 16bit */
#define WB_FRN_HIST_UNIT (WB_FRN_TIME_PERIOD / WB_FRN_HIST_SLOTS)
/* each slot's duration is 2s / 16 */
#define WB_FRN_HIST_THR_SLOTS (WB_FRN_HIST_SLOTS / 2)
/* if foreign slots >= 8, switch */
#define WB_FRN_HIST_MAX_SLOTS (WB_FRN_HIST_THR_SLOTS / 2 + 1)
/* one round can affect upto 5 slots */
#define WB_FRN_MAX_IN_FLIGHT 1024 /* don't queue too many concurrently */
static atomic_t isw_nr_in_flight = ATOMIC_INIT(0);
static struct workqueue_struct *isw_wq;
void __inode_attach_wb(struct inode *inode, struct page *page)
{
struct backing_dev_info *bdi = inode_to_bdi(inode);
struct bdi_writeback *wb = NULL;
if (inode_cgwb_enabled(inode)) {
struct cgroup_subsys_state *memcg_css;
if (page) {
memcg_css = mem_cgroup_css_from_page(page);
wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC);
} else {
/* must pin memcg_css, see wb_get_create() */
memcg_css = task_get_css(current, memory_cgrp_id);
wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC);
css_put(memcg_css);
}
}
if (!wb)
wb = &bdi->wb;
/*
* There may be multiple instances of this function racing to
* update the same inode. Use cmpxchg() to tell the winner.
*/
if (unlikely(cmpxchg(&inode->i_wb, NULL, wb)))
wb_put(wb);
}
EXPORT_SYMBOL_GPL(__inode_attach_wb);
/**
* locked_inode_to_wb_and_lock_list - determine a locked inode's wb and lock it
* @inode: inode of interest with i_lock held
*
* Returns @inode's wb with its list_lock held. @inode->i_lock must be
* held on entry and is released on return. The returned wb is guaranteed
* to stay @inode's associated wb until its list_lock is released.
*/
static struct bdi_writeback *
locked_inode_to_wb_and_lock_list(struct inode *inode)
__releases(&inode->i_lock)
__acquires(&wb->list_lock)
{
while (true) {
struct bdi_writeback *wb = inode_to_wb(inode);
/*
* inode_to_wb() association is protected by both
* @inode->i_lock and @wb->list_lock but list_lock nests
* outside i_lock. Drop i_lock and verify that the
* association hasn't changed after acquiring list_lock.
*/
wb_get(wb);
spin_unlock(&inode->i_lock);
spin_lock(&wb->list_lock);
/* i_wb may have changed inbetween, can't use inode_to_wb() */
if (likely(wb == inode->i_wb)) {
wb_put(wb); /* @inode already has ref */
return wb;
}
spin_unlock(&wb->list_lock);
wb_put(wb);
cpu_relax();
spin_lock(&inode->i_lock);
}
}
/**
* inode_to_wb_and_lock_list - determine an inode's wb and lock it
* @inode: inode of interest
*
* Same as locked_inode_to_wb_and_lock_list() but @inode->i_lock isn't held
* on entry.
*/
static struct bdi_writeback *inode_to_wb_and_lock_list(struct inode *inode)
__acquires(&wb->list_lock)
{
spin_lock(&inode->i_lock);
return locked_inode_to_wb_and_lock_list(inode);
}
struct inode_switch_wbs_context {
struct inode *inode;
struct bdi_writeback *new_wb;
struct rcu_head rcu_head;
struct work_struct work;
};
static void bdi_down_write_wb_switch_rwsem(struct backing_dev_info *bdi)
{
down_write(&bdi->wb_switch_rwsem);
}
static void bdi_up_write_wb_switch_rwsem(struct backing_dev_info *bdi)
{
up_write(&bdi->wb_switch_rwsem);
}
static void inode_switch_wbs_work_fn(struct work_struct *work)
{
struct inode_switch_wbs_context *isw =
container_of(work, struct inode_switch_wbs_context, work);
struct inode *inode = isw->inode;
struct backing_dev_info *bdi = inode_to_bdi(inode);
struct address_space *mapping = inode->i_mapping;
struct bdi_writeback *old_wb = inode->i_wb;
struct bdi_writeback *new_wb = isw->new_wb;
XA_STATE(xas, &mapping->i_pages, 0);
struct page *page;
bool switched = false;
/*
* If @inode switches cgwb membership while sync_inodes_sb() is
* being issued, sync_inodes_sb() might miss it. Synchronize.
*/
down_read(&bdi->wb_switch_rwsem);
/*
* By the time control reaches here, RCU grace period has passed
* since I_WB_SWITCH assertion and all wb stat update transactions
* between unlocked_inode_to_wb_begin/end() are guaranteed to be
* synchronizing against the i_pages lock.
*
* Grabbing old_wb->list_lock, inode->i_lock and the i_pages lock
* gives us exclusion against all wb related operations on @inode
* including IO list manipulations and stat updates.
*/
if (old_wb < new_wb) {
spin_lock(&old_wb->list_lock);
spin_lock_nested(&new_wb->list_lock, SINGLE_DEPTH_NESTING);
} else {
spin_lock(&new_wb->list_lock);
spin_lock_nested(&old_wb->list_lock, SINGLE_DEPTH_NESTING);
}
spin_lock(&inode->i_lock);
xa_lock_irq(&mapping->i_pages);
/*
* Once I_FREEING is visible under i_lock, the eviction path owns
* the inode and we shouldn't modify ->i_io_list.
*/
if (unlikely(inode->i_state & I_FREEING))
goto skip_switch;
trace_inode_switch_wbs(inode, old_wb, new_wb);
/*
* Count and transfer stats. Note that PAGECACHE_TAG_DIRTY points
* to possibly dirty pages while PAGECACHE_TAG_WRITEBACK points to
* pages actually under writeback.
*/
xas_for_each_marked(&xas, page, ULONG_MAX, PAGECACHE_TAG_DIRTY) {
if (PageDirty(page)) {
dec_wb_stat(old_wb, WB_RECLAIMABLE);
inc_wb_stat(new_wb, WB_RECLAIMABLE);
}
}
xas_set(&xas, 0);
xas_for_each_marked(&xas, page, ULONG_MAX, PAGECACHE_TAG_WRITEBACK) {
WARN_ON_ONCE(!PageWriteback(page));
dec_wb_stat(old_wb, WB_WRITEBACK);
inc_wb_stat(new_wb, WB_WRITEBACK);
}
wb_get(new_wb);
/*
* Transfer to @new_wb's IO list if necessary. The specific list
* @inode was on is ignored and the inode is put on ->b_dirty which
* is always correct including from ->b_dirty_time. The transfer
* preserves @inode->dirtied_when ordering.
*/
if (!list_empty(&inode->i_io_list)) {
struct inode *pos;
inode_io_list_del_locked(inode, old_wb);
inode->i_wb = new_wb;
list_for_each_entry(pos, &new_wb->b_dirty, i_io_list)
if (time_after_eq(inode->dirtied_when,
pos->dirtied_when))
break;
inode_io_list_move_locked(inode, new_wb, pos->i_io_list.prev);
} else {
inode->i_wb = new_wb;
}
/* ->i_wb_frn updates may race wbc_detach_inode() but doesn't matter */
inode->i_wb_frn_winner = 0;
inode->i_wb_frn_avg_time = 0;
inode->i_wb_frn_history = 0;
switched = true;
skip_switch:
/*
* Paired with load_acquire in unlocked_inode_to_wb_begin() and
* ensures that the new wb is visible if they see !I_WB_SWITCH.
*/
smp_store_release(&inode->i_state, inode->i_state & ~I_WB_SWITCH);
xa_unlock_irq(&mapping->i_pages);
spin_unlock(&inode->i_lock);
spin_unlock(&new_wb->list_lock);
spin_unlock(&old_wb->list_lock);
up_read(&bdi->wb_switch_rwsem);
if (switched) {
wb_wakeup(new_wb);
wb_put(old_wb);
}
wb_put(new_wb);
iput(inode);
kfree(isw);
atomic_dec(&isw_nr_in_flight);
}
static void inode_switch_wbs_rcu_fn(struct rcu_head *rcu_head)
{
struct inode_switch_wbs_context *isw = container_of(rcu_head,
struct inode_switch_wbs_context, rcu_head);
/* needs to grab bh-unsafe locks, bounce to work item */
INIT_WORK(&isw->work, inode_switch_wbs_work_fn);
queue_work(isw_wq, &isw->work);
}
/**
* inode_switch_wbs - change the wb association of an inode
* @inode: target inode
* @new_wb_id: ID of the new wb
*
* Switch @inode's wb association to the wb identified by @new_wb_id. The
* switching is performed asynchronously and may fail silently.
*/
static void inode_switch_wbs(struct inode *inode, int new_wb_id)
{
struct backing_dev_info *bdi = inode_to_bdi(inode);
struct cgroup_subsys_state *memcg_css;
struct inode_switch_wbs_context *isw;
/* noop if seems to be already in progress */
if (inode->i_state & I_WB_SWITCH)
return;
/* avoid queueing a new switch if too many are already in flight */
if (atomic_read(&isw_nr_in_flight) > WB_FRN_MAX_IN_FLIGHT)
return;
isw = kzalloc(sizeof(*isw), GFP_ATOMIC);
if (!isw)
return;
/* find and pin the new wb */
rcu_read_lock();
memcg_css = css_from_id(new_wb_id, &memory_cgrp_subsys);
if (memcg_css)
isw->new_wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC);
rcu_read_unlock();
if (!isw->new_wb)
goto out_free;
/* while holding I_WB_SWITCH, no one else can update the association */
spin_lock(&inode->i_lock);
if (!(inode->i_sb->s_flags & SB_ACTIVE) ||
inode->i_state & (I_WB_SWITCH | I_FREEING) ||
inode_to_wb(inode) == isw->new_wb) {
spin_unlock(&inode->i_lock);
goto out_free;
}
inode->i_state |= I_WB_SWITCH;
__iget(inode);
spin_unlock(&inode->i_lock);
isw->inode = inode;
/*
* In addition to synchronizing among switchers, I_WB_SWITCH tells
* the RCU protected stat update paths to grab the i_page
* lock so that stat transfer can synchronize against them.
* Let's continue after I_WB_SWITCH is guaranteed to be visible.
*/
call_rcu(&isw->rcu_head, inode_switch_wbs_rcu_fn);
atomic_inc(&isw_nr_in_flight);
return;
out_free:
if (isw->new_wb)
wb_put(isw->new_wb);
kfree(isw);
}
/**
* wbc_attach_and_unlock_inode - associate wbc with target inode and unlock it
* @wbc: writeback_control of interest
* @inode: target inode
*
* @inode is locked and about to be written back under the control of @wbc.
* Record @inode's writeback context into @wbc and unlock the i_lock. On
* writeback completion, wbc_detach_inode() should be called. This is used
* to track the cgroup writeback context.
*/
void wbc_attach_and_unlock_inode(struct writeback_control *wbc,
struct inode *inode)
{
if (!inode_cgwb_enabled(inode)) {
spin_unlock(&inode->i_lock);
return;
}
wbc->wb = inode_to_wb(inode);
wbc->inode = inode;
wbc->wb_id = wbc->wb->memcg_css->id;
wbc->wb_lcand_id = inode->i_wb_frn_winner;
wbc->wb_tcand_id = 0;
wbc->wb_bytes = 0;
wbc->wb_lcand_bytes = 0;
wbc->wb_tcand_bytes = 0;
wb_get(wbc->wb);
spin_unlock(&inode->i_lock);
/*
* A dying wb indicates that either the blkcg associated with the
* memcg changed or the associated memcg is dying. In the first
* case, a replacement wb should already be available and we should
* refresh the wb immediately. In the second case, trying to
* refresh will keep failing.
*/
if (unlikely(wb_dying(wbc->wb) && !css_is_dying(wbc->wb->memcg_css)))
inode_switch_wbs(inode, wbc->wb_id);
}
EXPORT_SYMBOL_GPL(wbc_attach_and_unlock_inode);
/**
* wbc_detach_inode - disassociate wbc from inode and perform foreign detection
* @wbc: writeback_control of the just finished writeback
*
* To be called after a writeback attempt of an inode finishes and undoes
* wbc_attach_and_unlock_inode(). Can be called under any context.
*
* As concurrent write sharing of an inode is expected to be very rare and
* memcg only tracks page ownership on first-use basis severely confining
* the usefulness of such sharing, cgroup writeback tracks ownership
* per-inode. While the support for concurrent write sharing of an inode
* is deemed unnecessary, an inode being written to by different cgroups at
* different points in time is a lot more common, and, more importantly,
* charging only by first-use can too readily lead to grossly incorrect
* behaviors (single foreign page can lead to gigabytes of writeback to be
* incorrectly attributed).
*
* To resolve this issue, cgroup writeback detects the majority dirtier of
* an inode and transfers the ownership to it. To avoid unnnecessary
* oscillation, the detection mechanism keeps track of history and gives
* out the switch verdict only if the foreign usage pattern is stable over
* a certain amount of time and/or writeback attempts.
*
* On each writeback attempt, @wbc tries to detect the majority writer
* using Boyer-Moore majority vote algorithm. In addition to the byte
* count from the majority voting, it also counts the bytes written for the
* current wb and the last round's winner wb (max of last round's current
* wb, the winner from two rounds ago, and the last round's majority
* candidate). Keeping track of the historical winner helps the algorithm
* to semi-reliably detect the most active writer even when it's not the
* absolute majority.
*
* Once the winner of the round is determined, whether the winner is
* foreign or not and how much IO time the round consumed is recorded in
* inode->i_wb_frn_history. If the amount of recorded foreign IO time is
* over a certain threshold, the switch verdict is given.
*/
void wbc_detach_inode(struct writeback_control *wbc)
{
struct bdi_writeback *wb = wbc->wb;
struct inode *inode = wbc->inode;
unsigned long avg_time, max_bytes, max_time;
u16 history;
int max_id;
if (!wb)
return;
history = inode->i_wb_frn_history;
avg_time = inode->i_wb_frn_avg_time;
/* pick the winner of this round */
if (wbc->wb_bytes >= wbc->wb_lcand_bytes &&
wbc->wb_bytes >= wbc->wb_tcand_bytes) {
max_id = wbc->wb_id;
max_bytes = wbc->wb_bytes;
} else if (wbc->wb_lcand_bytes >= wbc->wb_tcand_bytes) {
max_id = wbc->wb_lcand_id;
max_bytes = wbc->wb_lcand_bytes;
} else {
max_id = wbc->wb_tcand_id;
max_bytes = wbc->wb_tcand_bytes;
}
/*
* Calculate the amount of IO time the winner consumed and fold it
* into the running average kept per inode. If the consumed IO
* time is lower than avag / WB_FRN_TIME_CUT_DIV, ignore it for
* deciding whether to switch or not. This is to prevent one-off
* small dirtiers from skewing the verdict.
*/
max_time = DIV_ROUND_UP((max_bytes >> PAGE_SHIFT) << WB_FRN_TIME_SHIFT,
wb->avg_write_bandwidth);
if (avg_time)
avg_time += (max_time >> WB_FRN_TIME_AVG_SHIFT) -
(avg_time >> WB_FRN_TIME_AVG_SHIFT);
else
avg_time = max_time; /* immediate catch up on first run */
if (max_time >= avg_time / WB_FRN_TIME_CUT_DIV) {
int slots;
/*
* The switch verdict is reached if foreign wb's consume
* more than a certain proportion of IO time in a
* WB_FRN_TIME_PERIOD. This is loosely tracked by 16 slot
* history mask where each bit represents one sixteenth of
* the period. Determine the number of slots to shift into
* history from @max_time.
*/
slots = min(DIV_ROUND_UP(max_time, WB_FRN_HIST_UNIT),
(unsigned long)WB_FRN_HIST_MAX_SLOTS);
history <<= slots;
if (wbc->wb_id != max_id)
history |= (1U << slots) - 1;
if (history)
trace_inode_foreign_history(inode, wbc, history);
/*
* Switch if the current wb isn't the consistent winner.
* If there are multiple closely competing dirtiers, the
* inode may switch across them repeatedly over time, which
* is okay. The main goal is avoiding keeping an inode on
* the wrong wb for an extended period of time.
*/
if (hweight32(history) > WB_FRN_HIST_THR_SLOTS)
inode_switch_wbs(inode, max_id);
}
/*
* Multiple instances of this function may race to update the
* following fields but we don't mind occassional inaccuracies.
*/
inode->i_wb_frn_winner = max_id;
inode->i_wb_frn_avg_time = min(avg_time, (unsigned long)U16_MAX);
inode->i_wb_frn_history = history;
wb_put(wbc->wb);
wbc->wb = NULL;
}
EXPORT_SYMBOL_GPL(wbc_detach_inode);
/**
* wbc_account_cgroup_owner - account writeback to update inode cgroup ownership
* @wbc: writeback_control of the writeback in progress
* @page: page being written out
* @bytes: number of bytes being written out
*
* @bytes from @page are about to written out during the writeback
* controlled by @wbc. Keep the book for foreign inode detection. See
* wbc_detach_inode().
*/
void wbc_account_cgroup_owner(struct writeback_control *wbc, struct page *page,
size_t bytes)
{
struct cgroup_subsys_state *css;
int id;
/*
* pageout() path doesn't attach @wbc to the inode being written
* out. This is intentional as we don't want the function to block
* behind a slow cgroup. Ultimately, we want pageout() to kick off
* regular writeback instead of writing things out itself.
*/
if (!wbc->wb || wbc->no_cgroup_owner)
return;
css = mem_cgroup_css_from_page(page);
/* dead cgroups shouldn't contribute to inode ownership arbitration */
if (!(css->flags & CSS_ONLINE))
return;
id = css->id;
if (id == wbc->wb_id) {
wbc->wb_bytes += bytes;
return;
}
if (id == wbc->wb_lcand_id)
wbc->wb_lcand_bytes += bytes;
/* Boyer-Moore majority vote algorithm */
if (!wbc->wb_tcand_bytes)
wbc->wb_tcand_id = id;
if (id == wbc->wb_tcand_id)
wbc->wb_tcand_bytes += bytes;
else
wbc->wb_tcand_bytes -= min(bytes, wbc->wb_tcand_bytes);
}
EXPORT_SYMBOL_GPL(wbc_account_cgroup_owner);
/**
* inode_congested - test whether an inode is congested
* @inode: inode to test for congestion (may be NULL)
* @cong_bits: mask of WB_[a]sync_congested bits to test
*
* Tests whether @inode is congested. @cong_bits is the mask of congestion
* bits to test and the return value is the mask of set bits.
*
* If cgroup writeback is enabled for @inode, the congestion state is
* determined by whether the cgwb (cgroup bdi_writeback) for the blkcg
* associated with @inode is congested; otherwise, the root wb's congestion
* state is used.
*
* @inode is allowed to be NULL as this function is often called on
* mapping->host which is NULL for the swapper space.
*/
int inode_congested(struct inode *inode, int cong_bits)
{
/*
* Once set, ->i_wb never becomes NULL while the inode is alive.
* Start transaction iff ->i_wb is visible.
*/
if (inode && inode_to_wb_is_valid(inode)) {
struct bdi_writeback *wb;
struct wb_lock_cookie lock_cookie = {};
bool congested;
wb = unlocked_inode_to_wb_begin(inode, &lock_cookie);
congested = wb_congested(wb, cong_bits);
unlocked_inode_to_wb_end(inode, &lock_cookie);
return congested;
}
return wb_congested(&inode_to_bdi(inode)->wb, cong_bits);
}
EXPORT_SYMBOL_GPL(inode_congested);
/**
* wb_split_bdi_pages - split nr_pages to write according to bandwidth
* @wb: target bdi_writeback to split @nr_pages to
* @nr_pages: number of pages to write for the whole bdi
*
* Split @wb's portion of @nr_pages according to @wb's write bandwidth in
* relation to the total write bandwidth of all wb's w/ dirty inodes on
* @wb->bdi.
*/
static long wb_split_bdi_pages(struct bdi_writeback *wb, long nr_pages)
{
unsigned long this_bw = wb->avg_write_bandwidth;
unsigned long tot_bw = atomic_long_read(&wb->bdi->tot_write_bandwidth);
if (nr_pages == LONG_MAX)
return LONG_MAX;
/*
* This may be called on clean wb's and proportional distribution
* may not make sense, just use the original @nr_pages in those
* cases. In general, we wanna err on the side of writing more.
*/
if (!tot_bw || this_bw >= tot_bw)
return nr_pages;
else
return DIV_ROUND_UP_ULL((u64)nr_pages * this_bw, tot_bw);
}
/**
* bdi_split_work_to_wbs - split a wb_writeback_work to all wb's of a bdi
* @bdi: target backing_dev_info
* @base_work: wb_writeback_work to issue
* @skip_if_busy: skip wb's which already have writeback in progress
*
* Split and issue @base_work to all wb's (bdi_writeback's) of @bdi which
* have dirty inodes. If @base_work->nr_page isn't %LONG_MAX, it's
* distributed to the busy wbs according to each wb's proportion in the
* total active write bandwidth of @bdi.
*/
static void bdi_split_work_to_wbs(struct backing_dev_info *bdi,
struct wb_writeback_work *base_work,
bool skip_if_busy)
{
struct bdi_writeback *last_wb = NULL;
struct bdi_writeback *wb = list_entry(&bdi->wb_list,
struct bdi_writeback, bdi_node);
might_sleep();
restart:
rcu_read_lock();
list_for_each_entry_continue_rcu(wb, &bdi->wb_list, bdi_node) {
DEFINE_WB_COMPLETION(fallback_work_done, bdi);
struct wb_writeback_work fallback_work;
struct wb_writeback_work *work;
long nr_pages;
if (last_wb) {
wb_put(last_wb);
last_wb = NULL;
}
/* SYNC_ALL writes out I_DIRTY_TIME too */
if (!wb_has_dirty_io(wb) &&
(base_work->sync_mode == WB_SYNC_NONE ||
list_empty(&wb->b_dirty_time)))
continue;
if (skip_if_busy && writeback_in_progress(wb))
continue;
nr_pages = wb_split_bdi_pages(wb, base_work->nr_pages);
work = kmalloc(sizeof(*work), GFP_ATOMIC);
if (work) {
*work = *base_work;
work->nr_pages = nr_pages;
work->auto_free = 1;
wb_queue_work(wb, work);
continue;
}
/* alloc failed, execute synchronously using on-stack fallback */
work = &fallback_work;
*work = *base_work;
work->nr_pages = nr_pages;
work->auto_free = 0;
work->done = &fallback_work_done;
wb_queue_work(wb, work);
/*
* Pin @wb so that it stays on @bdi->wb_list. This allows
* continuing iteration from @wb after dropping and
* regrabbing rcu read lock.
*/
wb_get(wb);
last_wb = wb;
rcu_read_unlock();
wb_wait_for_completion(&fallback_work_done);
goto restart;
}
rcu_read_unlock();
if (last_wb)
wb_put(last_wb);
}
/**
* cgroup_writeback_by_id - initiate cgroup writeback from bdi and memcg IDs
* @bdi_id: target bdi id
* @memcg_id: target memcg css id
* @nr: number of pages to write, 0 for best-effort dirty flushing
* @reason: reason why some writeback work initiated
* @done: target wb_completion
*
* Initiate flush of the bdi_writeback identified by @bdi_id and @memcg_id
* with the specified parameters.
*/
int cgroup_writeback_by_id(u64 bdi_id, int memcg_id, unsigned long nr,
enum wb_reason reason, struct wb_completion *done)
{
struct backing_dev_info *bdi;
struct cgroup_subsys_state *memcg_css;
struct bdi_writeback *wb;
struct wb_writeback_work *work;
int ret;
/* lookup bdi and memcg */
bdi = bdi_get_by_id(bdi_id);
if (!bdi)
return -ENOENT;
rcu_read_lock();
memcg_css = css_from_id(memcg_id, &memory_cgrp_subsys);
if (memcg_css && !css_tryget(memcg_css))
memcg_css = NULL;
rcu_read_unlock();
if (!memcg_css) {
ret = -ENOENT;
goto out_bdi_put;
}
/*
* And find the associated wb. If the wb isn't there already
* there's nothing to flush, don't create one.
*/
wb = wb_get_lookup(bdi, memcg_css);
if (!wb) {
ret = -ENOENT;
goto out_css_put;
}
/*
* If @nr is zero, the caller is attempting to write out most of
* the currently dirty pages. Let's take the current dirty page
* count and inflate it by 25% which should be large enough to
* flush out most dirty pages while avoiding getting livelocked by
* concurrent dirtiers.
*/
if (!nr) {
unsigned long filepages, headroom, dirty, writeback;
mem_cgroup_wb_stats(wb, &filepages, &headroom, &dirty,
&writeback);
nr = dirty * 10 / 8;
}
/* issue the writeback work */
work = kzalloc(sizeof(*work), GFP_NOWAIT | __GFP_NOWARN);
if (work) {
work->nr_pages = nr;
work->sync_mode = WB_SYNC_NONE;
work->range_cyclic = 1;
work->reason = reason;
work->done = done;
work->auto_free = 1;
wb_queue_work(wb, work);
ret = 0;
} else {
ret = -ENOMEM;
}
wb_put(wb);
out_css_put:
css_put(memcg_css);
out_bdi_put:
bdi_put(bdi);
return ret;
}
/**
* cgroup_writeback_umount - flush inode wb switches for umount
*
* This function is called when a super_block is about to be destroyed and
* flushes in-flight inode wb switches. An inode wb switch goes through
* RCU and then workqueue, so the two need to be flushed in order to ensure
* that all previously scheduled switches are finished. As wb switches are
* rare occurrences and synchronize_rcu() can take a while, perform
* flushing iff wb switches are in flight.
*/
void cgroup_writeback_umount(void)
{
if (atomic_read(&isw_nr_in_flight)) {
/*
* Use rcu_barrier() to wait for all pending callbacks to
* ensure that all in-flight wb switches are in the workqueue.
*/
rcu_barrier();
flush_workqueue(isw_wq);
}
}
static int __init cgroup_writeback_init(void)
{
isw_wq = alloc_workqueue("inode_switch_wbs", 0, 0);
if (!isw_wq)
return -ENOMEM;
return 0;
}
fs_initcall(cgroup_writeback_init);
#else /* CONFIG_CGROUP_WRITEBACK */
static void bdi_down_write_wb_switch_rwsem(struct backing_dev_info *bdi) { }
static void bdi_up_write_wb_switch_rwsem(struct backing_dev_info *bdi) { }
static struct bdi_writeback *
locked_inode_to_wb_and_lock_list(struct inode *inode)
__releases(&inode->i_lock)
__acquires(&wb->list_lock)
{
struct bdi_writeback *wb = inode_to_wb(inode);
spin_unlock(&inode->i_lock);
spin_lock(&wb->list_lock);
return wb;
}
static struct bdi_writeback *inode_to_wb_and_lock_list(struct inode *inode)
__acquires(&wb->list_lock)
{
struct bdi_writeback *wb = inode_to_wb(inode);
spin_lock(&wb->list_lock);
return wb;
}
static long wb_split_bdi_pages(struct bdi_writeback *wb, long nr_pages)
{
return nr_pages;
}
static void bdi_split_work_to_wbs(struct backing_dev_info *bdi,
struct wb_writeback_work *base_work,
bool skip_if_busy)
{
might_sleep();
if (!skip_if_busy || !writeback_in_progress(&bdi->wb)) {
base_work->auto_free = 0;
wb_queue_work(&bdi->wb, base_work);
}
}
#endif /* CONFIG_CGROUP_WRITEBACK */
/*
* Add in the number of potentially dirty inodes, because each inode
* write can dirty pagecache in the underlying blockdev.
*/
static unsigned long get_nr_dirty_pages(void)
{
return global_node_page_state(NR_FILE_DIRTY) +
get_nr_dirty_inodes();
}
static void wb_start_writeback(struct bdi_writeback *wb, enum wb_reason reason)
{
if (!wb_has_dirty_io(wb))
return;
/*
* All callers of this function want to start writeback of all
* dirty pages. Places like vmscan can call this at a very
* high frequency, causing pointless allocations of tons of
* work items and keeping the flusher threads busy retrieving
* that work. Ensure that we only allow one of them pending and
* inflight at the time.
*/
if (test_bit(WB_start_all, &wb->state) ||
test_and_set_bit(WB_start_all, &wb->state))
return;
wb->start_all_reason = reason;
wb_wakeup(wb);
}
/**
* wb_start_background_writeback - start background writeback
* @wb: bdi_writback to write from
*
* Description:
* This makes sure WB_SYNC_NONE background writeback happens. When
* this function returns, it is only guaranteed that for given wb
* some IO is happening if we are over background dirty threshold.
* Caller need not hold sb s_umount semaphore.
*/
void wb_start_background_writeback(struct bdi_writeback *wb)
{
/*
* We just wake up the flusher thread. It will perform background
* writeback as soon as there is no other work to do.
*/
trace_writeback_wake_background(wb);
wb_wakeup(wb);
}
/*
* Remove the inode from the writeback list it is on.
*/
void inode_io_list_del(struct inode *inode)
{
struct bdi_writeback *wb;
wb = inode_to_wb_and_lock_list(inode);
spin_lock(&inode->i_lock);
inode_io_list_del_locked(inode, wb);
spin_unlock(&inode->i_lock);
spin_unlock(&wb->list_lock);
}
EXPORT_SYMBOL(inode_io_list_del);
/*
* mark an inode as under writeback on the sb
*/
void sb_mark_inode_writeback(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
unsigned long flags;
if (list_empty(&inode->i_wb_list)) {
spin_lock_irqsave(&sb->s_inode_wblist_lock, flags);
if (list_empty(&inode->i_wb_list)) {
list_add_tail(&inode->i_wb_list, &sb->s_inodes_wb);
trace_sb_mark_inode_writeback(inode);
}
spin_unlock_irqrestore(&sb->s_inode_wblist_lock, flags);
}
}
/*
* clear an inode as under writeback on the sb
*/
void sb_clear_inode_writeback(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
unsigned long flags;
if (!list_empty(&inode->i_wb_list)) {
spin_lock_irqsave(&sb->s_inode_wblist_lock, flags);
if (!list_empty(&inode->i_wb_list)) {
list_del_init(&inode->i_wb_list);
trace_sb_clear_inode_writeback(inode);
}
spin_unlock_irqrestore(&sb->s_inode_wblist_lock, flags);
}
}
/*
* Redirty an inode: set its when-it-was dirtied timestamp and move it to the
* furthest end of its superblock's dirty-inode list.
*
* Before stamping the inode's ->dirtied_when, we check to see whether it is
* already the most-recently-dirtied inode on the b_dirty list. If that is
* the case then the inode must have been redirtied while it was being written
* out and we don't reset its dirtied_when.
*/
static void redirty_tail_locked(struct inode *inode, struct bdi_writeback *wb)
{
assert_spin_locked(&inode->i_lock);
if (!list_empty(&wb->b_dirty)) {
struct inode *tail;
tail = wb_inode(wb->b_dirty.next);
if (time_before(inode->dirtied_when, tail->dirtied_when))
inode->dirtied_when = jiffies;
}
inode_io_list_move_locked(inode, wb, &wb->b_dirty);
inode->i_state &= ~I_SYNC_QUEUED;
}
static void redirty_tail(struct inode *inode, struct bdi_writeback *wb)
{
spin_lock(&inode->i_lock);
redirty_tail_locked(inode, wb);
spin_unlock(&inode->i_lock);
}
/*
* requeue inode for re-scanning after bdi->b_io list is exhausted.
*/
static void requeue_io(struct inode *inode, struct bdi_writeback *wb)
{
inode_io_list_move_locked(inode, wb, &wb->b_more_io);
}
static void inode_sync_complete(struct inode *inode)
{
inode->i_state &= ~I_SYNC;
/* If inode is clean an unused, put it into LRU now... */
inode_add_lru(inode);
/* Waiters must see I_SYNC cleared before being woken up */
smp_mb();
wake_up_bit(&inode->i_state, __I_SYNC);
}
static bool inode_dirtied_after(struct inode *inode, unsigned long t)
{
bool ret = time_after(inode->dirtied_when, t);
#ifndef CONFIG_64BIT
/*
* For inodes being constantly redirtied, dirtied_when can get stuck.
* It _appears_ to be in the future, but is actually in distant past.
* This test is necessary to prevent such wrapped-around relative times
* from permanently stopping the whole bdi writeback.
*/
ret = ret && time_before_eq(inode->dirtied_when, jiffies);
#endif
return ret;
}
#define EXPIRE_DIRTY_ATIME 0x0001
/*
* Move expired (dirtied before dirtied_before) dirty inodes from
* @delaying_queue to @dispatch_queue.
*/
static int move_expired_inodes(struct list_head *delaying_queue,
struct list_head *dispatch_queue,
unsigned long dirtied_before)
{
LIST_HEAD(tmp);
struct list_head *pos, *node;
struct super_block *sb = NULL;
struct inode *inode;
int do_sb_sort = 0;
int moved = 0;
while (!list_empty(delaying_queue)) {
inode = wb_inode(delaying_queue->prev);
if (inode_dirtied_after(inode, dirtied_before))
break;
list_move(&inode->i_io_list, &tmp);
moved++;
spin_lock(&inode->i_lock);
inode->i_state |= I_SYNC_QUEUED;
spin_unlock(&inode->i_lock);
if (sb_is_blkdev_sb(inode->i_sb))
continue;
if (sb && sb != inode->i_sb)
do_sb_sort = 1;
sb = inode->i_sb;
}
/* just one sb in list, splice to dispatch_queue and we're done */
if (!do_sb_sort) {
list_splice(&tmp, dispatch_queue);
goto out;
}
/* Move inodes from one superblock together */
while (!list_empty(&tmp)) {
sb = wb_inode(tmp.prev)->i_sb;
list_for_each_prev_safe(pos, node, &tmp) {
inode = wb_inode(pos);
if (inode->i_sb == sb)
list_move(&inode->i_io_list, dispatch_queue);
}
}
out:
return moved;
}
/*
* Queue all expired dirty inodes for io, eldest first.
* Before
* newly dirtied b_dirty b_io b_more_io
* =============> gf edc BA
* After
* newly dirtied b_dirty b_io b_more_io
* =============> g fBAedc
* |
* +--> dequeue for IO
*/
static void queue_io(struct bdi_writeback *wb, struct wb_writeback_work *work,
unsigned long dirtied_before)
{
int moved;
unsigned long time_expire_jif = dirtied_before;
assert_spin_locked(&wb->list_lock);
list_splice_init(&wb->b_more_io, &wb->b_io);
moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, dirtied_before);
if (!work->for_sync)
time_expire_jif = jiffies - dirtytime_expire_interval * HZ;
moved += move_expired_inodes(&wb->b_dirty_time, &wb->b_io,
time_expire_jif);
if (moved)
wb_io_lists_populated(wb);
trace_writeback_queue_io(wb, work, dirtied_before, moved);
}
static int write_inode(struct inode *inode, struct writeback_control *wbc)
{
int ret;
if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode)) {
trace_writeback_write_inode_start(inode, wbc);
ret = inode->i_sb->s_op->write_inode(inode, wbc);
trace_writeback_write_inode(inode, wbc);
return ret;
}
return 0;
}
/*
* Wait for writeback on an inode to complete. Called with i_lock held.
* Caller must make sure inode cannot go away when we drop i_lock.
*/
static void __inode_wait_for_writeback(struct inode *inode)
__releases(inode->i_lock)
__acquires(inode->i_lock)
{
DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC);
wait_queue_head_t *wqh;
wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
while (inode->i_state & I_SYNC) {
spin_unlock(&inode->i_lock);
__wait_on_bit(wqh, &wq, bit_wait,
TASK_UNINTERRUPTIBLE);
spin_lock(&inode->i_lock);
}
}
/*
* Wait for writeback on an inode to complete. Caller must have inode pinned.
*/
void inode_wait_for_writeback(struct inode *inode)
{
spin_lock(&inode->i_lock);
__inode_wait_for_writeback(inode);
spin_unlock(&inode->i_lock);
}
/*
* Sleep until I_SYNC is cleared. This function must be called with i_lock
* held and drops it. It is aimed for callers not holding any inode reference
* so once i_lock is dropped, inode can go away.
*/
static void inode_sleep_on_writeback(struct inode *inode)
__releases(inode->i_lock)
{
DEFINE_WAIT(wait);
wait_queue_head_t *wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
int sleep;
prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE);
sleep = inode->i_state & I_SYNC;
spin_unlock(&inode->i_lock);
if (sleep)
schedule();
finish_wait(wqh, &wait);
}
/*
* Find proper writeback list for the inode depending on its current state and
* possibly also change of its state while we were doing writeback. Here we
* handle things such as livelock prevention or fairness of writeback among
* inodes. This function can be called only by flusher thread - noone else
* processes all inodes in writeback lists and requeueing inodes behind flusher
* thread's back can have unexpected consequences.
*/
static void requeue_inode(struct inode *inode, struct bdi_writeback *wb,
struct writeback_control *wbc)
{
if (inode->i_state & I_FREEING)
return;
/*
* Sync livelock prevention. Each inode is tagged and synced in one
* shot. If still dirty, it will be redirty_tail()'ed below. Update
* the dirty time to prevent enqueue and sync it again.
*/
if ((inode->i_state & I_DIRTY) &&
(wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages))
inode->dirtied_when = jiffies;
if (wbc->pages_skipped) {
/*
* writeback is not making progress due to locked
* buffers. Skip this inode for now.
*/
redirty_tail_locked(inode, wb);
return;
}
if (mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) {
/*
* We didn't write back all the pages. nfs_writepages()
* sometimes bales out without doing anything.
*/
if (wbc->nr_to_write <= 0) {
/* Slice used up. Queue for next turn. */
requeue_io(inode, wb);
} else {
/*
* Writeback blocked by something other than
* congestion. Delay the inode for some time to
* avoid spinning on the CPU (100% iowait)
* retrying writeback of the dirty page/inode
* that cannot be performed immediately.
*/
redirty_tail_locked(inode, wb);
}
} else if (inode->i_state & I_DIRTY) {
/*
* Filesystems can dirty the inode during writeback operations,
* such as delayed allocation during submission or metadata
* updates after data IO completion.
*/
redirty_tail_locked(inode, wb);
} else if (inode->i_state & I_DIRTY_TIME) {
inode->dirtied_when = jiffies;
inode_io_list_move_locked(inode, wb, &wb->b_dirty_time);
inode->i_state &= ~I_SYNC_QUEUED;
} else {
/* The inode is clean. Remove from writeback lists. */
inode_io_list_del_locked(inode, wb);
}
}
/*
* Write out an inode and its dirty pages. Do not update the writeback list
* linkage. That is left to the caller. The caller is also responsible for
* setting I_SYNC flag and calling inode_sync_complete() to clear it.
*/
static int
__writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
{
struct address_space *mapping = inode->i_mapping;
long nr_to_write = wbc->nr_to_write;
unsigned dirty;
int ret;
WARN_ON(!(inode->i_state & I_SYNC));
trace_writeback_single_inode_start(inode, wbc, nr_to_write);
ret = do_writepages(mapping, wbc);
/*
* Make sure to wait on the data before writing out the metadata.
* This is important for filesystems that modify metadata on data
* I/O completion. We don't do it for sync(2) writeback because it has a
* separate, external IO completion path and ->sync_fs for guaranteeing
* inode metadata is written back correctly.
*/
if (wbc->sync_mode == WB_SYNC_ALL && !wbc->for_sync) {
int err = filemap_fdatawait(mapping);
if (ret == 0)
ret = err;
}
/*
* If the inode has dirty timestamps and we need to write them, call
* mark_inode_dirty_sync() to notify the filesystem about it and to
* change I_DIRTY_TIME into I_DIRTY_SYNC.
*/
if ((inode->i_state & I_DIRTY_TIME) &&
(wbc->sync_mode == WB_SYNC_ALL || wbc->for_sync ||
time_after(jiffies, inode->dirtied_time_when +
dirtytime_expire_interval * HZ))) {
trace_writeback_lazytime(inode);
mark_inode_dirty_sync(inode);
}
/*
* Some filesystems may redirty the inode during the writeback
* due to delalloc, clear dirty metadata flags right before
* write_inode()
*/
spin_lock(&inode->i_lock);
dirty = inode->i_state & I_DIRTY;
inode->i_state &= ~dirty;
/*
* Paired with smp_mb() in __mark_inode_dirty(). This allows
* __mark_inode_dirty() to test i_state without grabbing i_lock -
* either they see the I_DIRTY bits cleared or we see the dirtied
* inode.
*
* I_DIRTY_PAGES is always cleared together above even if @mapping
* still has dirty pages. The flag is reinstated after smp_mb() if
* necessary. This guarantees that either __mark_inode_dirty()
* sees clear I_DIRTY_PAGES or we see PAGECACHE_TAG_DIRTY.
*/
smp_mb();
if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
inode->i_state |= I_DIRTY_PAGES;
spin_unlock(&inode->i_lock);
/* Don't write the inode if only I_DIRTY_PAGES was set */
if (dirty & ~I_DIRTY_PAGES) {
int err = write_inode(inode, wbc);
if (ret == 0)
ret = err;
}
trace_writeback_single_inode(inode, wbc, nr_to_write);
return ret;
}
/*
* Write out an inode's dirty pages. Either the caller has an active reference
* on the inode or the inode has I_WILL_FREE set.
*
* This function is designed to be called for writing back one inode which
* we go e.g. from filesystem. Flusher thread uses __writeback_single_inode()
* and does more profound writeback list handling in writeback_sb_inodes().
*/
static int writeback_single_inode(struct inode *inode,
struct writeback_control *wbc)
{
struct bdi_writeback *wb;
int ret = 0;
spin_lock(&inode->i_lock);
if (!atomic_read(&inode->i_count))
WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING)));
else
WARN_ON(inode->i_state & I_WILL_FREE);
if (inode->i_state & I_SYNC) {
if (wbc->sync_mode != WB_SYNC_ALL)
goto out;
/*
* It's a data-integrity sync. We must wait. Since callers hold
* inode reference or inode has I_WILL_FREE set, it cannot go
* away under us.
*/
__inode_wait_for_writeback(inode);
}
WARN_ON(inode->i_state & I_SYNC);
/*
* Skip inode if it is clean and we have no outstanding writeback in
* WB_SYNC_ALL mode. We don't want to mess with writeback lists in this
* function since flusher thread may be doing for example sync in
* parallel and if we move the inode, it could get skipped. So here we
* make sure inode is on some writeback list and leave it there unless
* we have completely cleaned the inode.
*/
if (!(inode->i_state & I_DIRTY_ALL) &&
(wbc->sync_mode != WB_SYNC_ALL ||
!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_WRITEBACK)))
goto out;
inode->i_state |= I_SYNC;
wbc_attach_and_unlock_inode(wbc, inode);
ret = __writeback_single_inode(inode, wbc);
wbc_detach_inode(wbc);
wb = inode_to_wb_and_lock_list(inode);
spin_lock(&inode->i_lock);
/*
* If inode is clean, remove it from writeback lists. Otherwise don't
* touch it. See comment above for explanation.
*/
if (!(inode->i_state & I_DIRTY_ALL))
inode_io_list_del_locked(inode, wb);
spin_unlock(&wb->list_lock);
inode_sync_complete(inode);
out:
spin_unlock(&inode->i_lock);
return ret;
}
static long writeback_chunk_size(struct bdi_writeback *wb,
struct wb_writeback_work *work)
{
long pages;
/*
* WB_SYNC_ALL mode does livelock avoidance by syncing dirty
* inodes/pages in one big loop. Setting wbc.nr_to_write=LONG_MAX
* here avoids calling into writeback_inodes_wb() more than once.
*
* The intended call sequence for WB_SYNC_ALL writeback is:
*
* wb_writeback()
* writeback_sb_inodes() <== called only once
* write_cache_pages() <== called once for each inode
* (quickly) tag currently dirty pages
* (maybe slowly) sync all tagged pages
*/
if (work->sync_mode == WB_SYNC_ALL || work->tagged_writepages)
pages = LONG_MAX;
else {
pages = min(wb->avg_write_bandwidth / 2,
global_wb_domain.dirty_limit / DIRTY_SCOPE);
pages = min(pages, work->nr_pages);
pages = round_down(pages + MIN_WRITEBACK_PAGES,
MIN_WRITEBACK_PAGES);
}
return pages;
}
/*
* Write a portion of b_io inodes which belong to @sb.
*
* Return the number of pages and/or inodes written.
*
* NOTE! This is called with wb->list_lock held, and will
* unlock and relock that for each inode it ends up doing
* IO for.
*/
static long writeback_sb_inodes(struct super_block *sb,
struct bdi_writeback *wb,
struct wb_writeback_work *work)
{
struct writeback_control wbc = {
.sync_mode = work->sync_mode,
.tagged_writepages = work->tagged_writepages,
.for_kupdate = work->for_kupdate,
.for_background = work->for_background,
.for_sync = work->for_sync,
.range_cyclic = work->range_cyclic,
.range_start = 0,
.range_end = LLONG_MAX,
};
unsigned long start_time = jiffies;
long write_chunk;
long wrote = 0; /* count both pages and inodes */
while (!list_empty(&wb->b_io)) {
struct inode *inode = wb_inode(wb->b_io.prev);
struct bdi_writeback *tmp_wb;
if (inode->i_sb != sb) {
if (work->sb) {
/*
* We only want to write back data for this
* superblock, move all inodes not belonging
* to it back onto the dirty list.
*/
redirty_tail(inode, wb);
continue;
}
/*
* The inode belongs to a different superblock.
* Bounce back to the caller to unpin this and
* pin the next superblock.
*/
break;
}
/*
* Don't bother with new inodes or inodes being freed, first
* kind does not need periodic writeout yet, and for the latter
* kind writeout is handled by the freer.
*/
spin_lock(&inode->i_lock);
if (inode->i_state & (I_NEW | I_FREEING | I_WILL_FREE)) {
redirty_tail_locked(inode, wb);
spin_unlock(&inode->i_lock);
continue;
}
if ((inode->i_state & I_SYNC) && wbc.sync_mode != WB_SYNC_ALL) {
/*
* If this inode is locked for writeback and we are not
* doing writeback-for-data-integrity, move it to
* b_more_io so that writeback can proceed with the
* other inodes on s_io.
*
* We'll have another go at writing back this inode
* when we completed a full scan of b_io.
*/
spin_unlock(&inode->i_lock);
requeue_io(inode, wb);
trace_writeback_sb_inodes_requeue(inode);
continue;
}
spin_unlock(&wb->list_lock);
/*
* We already requeued the inode if it had I_SYNC set and we
* are doing WB_SYNC_NONE writeback. So this catches only the
* WB_SYNC_ALL case.
*/
if (inode->i_state & I_SYNC) {
/* Wait for I_SYNC. This function drops i_lock... */
inode_sleep_on_writeback(inode);
/* Inode may be gone, start again */
spin_lock(&wb->list_lock);
continue;
}
inode->i_state |= I_SYNC;
wbc_attach_and_unlock_inode(&wbc, inode);
write_chunk = writeback_chunk_size(wb, work);
wbc.nr_to_write = write_chunk;
wbc.pages_skipped = 0;
/*
* We use I_SYNC to pin the inode in memory. While it is set
* evict_inode() will wait so the inode cannot be freed.
*/
__writeback_single_inode(inode, &wbc);
wbc_detach_inode(&wbc);
work->nr_pages -= write_chunk - wbc.nr_to_write;
wrote += write_chunk - wbc.nr_to_write;
if (need_resched()) {
/*
* We're trying to balance between building up a nice
* long list of IOs to improve our merge rate, and
* getting those IOs out quickly for anyone throttling
* in balance_dirty_pages(). cond_resched() doesn't
* unplug, so get our IOs out the door before we
* give up the CPU.
*/
blk_flush_plug(current);
cond_resched();
}
/*
* Requeue @inode if still dirty. Be careful as @inode may
* have been switched to another wb in the meantime.
*/
tmp_wb = inode_to_wb_and_lock_list(inode);
spin_lock(&inode->i_lock);
if (!(inode->i_state & I_DIRTY_ALL))
wrote++;
requeue_inode(inode, tmp_wb, &wbc);
inode_sync_complete(inode);
spin_unlock(&inode->i_lock);
if (unlikely(tmp_wb != wb)) {
spin_unlock(&tmp_wb->list_lock);
spin_lock(&wb->list_lock);
}
/*
* bail out to wb_writeback() often enough to check
* background threshold and other termination conditions.
*/
if (wrote) {
if (time_is_before_jiffies(start_time + HZ / 10UL))
break;
if (work->nr_pages <= 0)
break;
}
}
return wrote;
}
static long __writeback_inodes_wb(struct bdi_writeback *wb,
struct wb_writeback_work *work)
{
unsigned long start_time = jiffies;
long wrote = 0;
while (!list_empty(&wb->b_io)) {
struct inode *inode = wb_inode(wb->b_io.prev);
struct super_block *sb = inode->i_sb;
if (!trylock_super(sb)) {
/*
* trylock_super() may fail consistently due to
* s_umount being grabbed by someone else. Don't use
* requeue_io() to avoid busy retrying the inode/sb.
*/
redirty_tail(inode, wb);
continue;
}
wrote += writeback_sb_inodes(sb, wb, work);
up_read(&sb->s_umount);
/* refer to the same tests at the end of writeback_sb_inodes */
if (wrote) {
if (time_is_before_jiffies(start_time + HZ / 10UL))
break;
if (work->nr_pages <= 0)
break;
}
}
/* Leave any unwritten inodes on b_io */
return wrote;
}
static long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
enum wb_reason reason)
{
struct wb_writeback_work work = {
.nr_pages = nr_pages,
.sync_mode = WB_SYNC_NONE,
.range_cyclic = 1,
.reason = reason,
};
struct blk_plug plug;
blk_start_plug(&plug);
spin_lock(&wb->list_lock);
if (list_empty(&wb->b_io))
queue_io(wb, &work, jiffies);
__writeback_inodes_wb(wb, &work);
spin_unlock(&wb->list_lock);
blk_finish_plug(&plug);
return nr_pages - work.nr_pages;
}
/*
* Explicit flushing or periodic writeback of "old" data.
*
* Define "old": the first time one of an inode's pages is dirtied, we mark the
* dirtying-time in the inode's address_space. So this periodic writeback code
* just walks the superblock inode list, writing back any inodes which are
* older than a specific point in time.
*
* Try to run once per dirty_writeback_interval. But if a writeback event
* takes longer than a dirty_writeback_interval interval, then leave a
* one-second gap.
*
* dirtied_before takes precedence over nr_to_write. So we'll only write back
* all dirty pages if they are all attached to "old" mappings.
*/
static long wb_writeback(struct bdi_writeback *wb,
struct wb_writeback_work *work)
{
unsigned long wb_start = jiffies;
long nr_pages = work->nr_pages;
unsigned long dirtied_before = jiffies;
struct inode *inode;
long progress;
struct blk_plug plug;
blk_start_plug(&plug);
spin_lock(&wb->list_lock);
for (;;) {
/*
* Stop writeback when nr_pages has been consumed
*/
if (work->nr_pages <= 0)
break;
/*
* Background writeout and kupdate-style writeback may
* run forever. Stop them if there is other work to do
* so that e.g. sync can proceed. They'll be restarted
* after the other works are all done.
*/
if ((work->for_background || work->for_kupdate) &&
!list_empty(&wb->work_list))
break;
/*
* For background writeout, stop when we are below the
* background dirty threshold
*/
if (work->for_background && !wb_over_bg_thresh(wb))
break;
/*
* Kupdate and background works are special and we want to
* include all inodes that need writing. Livelock avoidance is
* handled by these works yielding to any other work so we are
* safe.
*/
if (work->for_kupdate) {
dirtied_before = jiffies -
msecs_to_jiffies(dirty_expire_interval * 10);
} else if (work->for_background)
dirtied_before = jiffies;
trace_writeback_start(wb, work);
if (list_empty(&wb->b_io))
queue_io(wb, work, dirtied_before);
if (work->sb)
progress = writeback_sb_inodes(work->sb, wb, work);
else
progress = __writeback_inodes_wb(wb, work);
trace_writeback_written(wb, work);
wb_update_bandwidth(wb, wb_start);
/*
* Did we write something? Try for more
*
* Dirty inodes are moved to b_io for writeback in batches.
* The completion of the current batch does not necessarily
* mean the overall work is done. So we keep looping as long
* as made some progress on cleaning pages or inodes.
*/
if (progress)
continue;
/*
* No more inodes for IO, bail
*/
if (list_empty(&wb->b_more_io))
break;
/*
* Nothing written. Wait for some inode to
* become available for writeback. Otherwise
* we'll just busyloop.
*/
trace_writeback_wait(wb, work);
inode = wb_inode(wb->b_more_io.prev);
spin_lock(&inode->i_lock);
spin_unlock(&wb->list_lock);
/* This function drops i_lock... */
inode_sleep_on_writeback(inode);
spin_lock(&wb->list_lock);
}
spin_unlock(&wb->list_lock);
blk_finish_plug(&plug);
return nr_pages - work->nr_pages;
}
/*
* Return the next wb_writeback_work struct that hasn't been processed yet.
*/
static struct wb_writeback_work *get_next_work_item(struct bdi_writeback *wb)
{
struct wb_writeback_work *work = NULL;
spin_lock_bh(&wb->work_lock);
if (!list_empty(&wb->work_list)) {
work = list_entry(wb->work_list.next,
struct wb_writeback_work, list);
list_del_init(&work->list);
}
spin_unlock_bh(&wb->work_lock);
return work;
}
static long wb_check_background_flush(struct bdi_writeback *wb)
{
if (wb_over_bg_thresh(wb)) {
struct wb_writeback_work work = {
.nr_pages = LONG_MAX,
.sync_mode = WB_SYNC_NONE,
.for_background = 1,
.range_cyclic = 1,
.reason = WB_REASON_BACKGROUND,
};
return wb_writeback(wb, &work);
}
return 0;
}
static long wb_check_old_data_flush(struct bdi_writeback *wb)
{
unsigned long expired;
long nr_pages;
/*
* When set to zero, disable periodic writeback
*/
if (!dirty_writeback_interval)
return 0;
expired = wb->last_old_flush +
msecs_to_jiffies(dirty_writeback_interval * 10);
if (time_before(jiffies, expired))
return 0;
wb->last_old_flush = jiffies;
nr_pages = get_nr_dirty_pages();
if (nr_pages) {
struct wb_writeback_work work = {
.nr_pages = nr_pages,
.sync_mode = WB_SYNC_NONE,
.for_kupdate = 1,
.range_cyclic = 1,
.reason = WB_REASON_PERIODIC,
};
return wb_writeback(wb, &work);
}
return 0;
}
static long wb_check_start_all(struct bdi_writeback *wb)
{
long nr_pages;
if (!test_bit(WB_start_all, &wb->state))
return 0;
nr_pages = get_nr_dirty_pages();
if (nr_pages) {
struct wb_writeback_work work = {
.nr_pages = wb_split_bdi_pages(wb, nr_pages),
.sync_mode = WB_SYNC_NONE,
.range_cyclic = 1,
.reason = wb->start_all_reason,
};
nr_pages = wb_writeback(wb, &work);
}
clear_bit(WB_start_all, &wb->state);
return nr_pages;
}
/*
* Retrieve work items and do the writeback they describe
*/
static long wb_do_writeback(struct bdi_writeback *wb)
{
struct wb_writeback_work *work;
long wrote = 0;
set_bit(WB_writeback_running, &wb->state);
while ((work = get_next_work_item(wb)) != NULL) {
trace_writeback_exec(wb, work);
wrote += wb_writeback(wb, work);
finish_writeback_work(wb, work);
}
/*
* Check for a flush-everything request
*/
wrote += wb_check_start_all(wb);
/*
* Check for periodic writeback, kupdated() style
*/
wrote += wb_check_old_data_flush(wb);
wrote += wb_check_background_flush(wb);
clear_bit(WB_writeback_running, &wb->state);
return wrote;
}
/*
* Handle writeback of dirty data for the device backed by this bdi. Also
* reschedules periodically and does kupdated style flushing.
*/
void wb_workfn(struct work_struct *work)
{
struct bdi_writeback *wb = container_of(to_delayed_work(work),
struct bdi_writeback, dwork);
long pages_written;
set_worker_desc("flush-%s", bdi_dev_name(wb->bdi));
current->flags |= PF_SWAPWRITE;
if (likely(!current_is_workqueue_rescuer() ||
!test_bit(WB_registered, &wb->state))) {
/*
* The normal path. Keep writing back @wb until its
* work_list is empty. Note that this path is also taken
* if @wb is shutting down even when we're running off the
* rescuer as work_list needs to be drained.
*/
do {
pages_written = wb_do_writeback(wb);
trace_writeback_pages_written(pages_written);
} while (!list_empty(&wb->work_list));
} else {
/*
* bdi_wq can't get enough workers and we're running off
* the emergency worker. Don't hog it. Hopefully, 1024 is
* enough for efficient IO.
*/
pages_written = writeback_inodes_wb(wb, 1024,
WB_REASON_FORKER_THREAD);
trace_writeback_pages_written(pages_written);
}
if (!list_empty(&wb->work_list))
wb_wakeup(wb);
else if (wb_has_dirty_io(wb) && dirty_writeback_interval)
wb_wakeup_delayed(wb);
current->flags &= ~PF_SWAPWRITE;
}
/*
* Start writeback of `nr_pages' pages on this bdi. If `nr_pages' is zero,
* write back the whole world.
*/
static void __wakeup_flusher_threads_bdi(struct backing_dev_info *bdi,
enum wb_reason reason)
{
struct bdi_writeback *wb;
if (!bdi_has_dirty_io(bdi))
return;
list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node)
wb_start_writeback(wb, reason);
}
void wakeup_flusher_threads_bdi(struct backing_dev_info *bdi,
enum wb_reason reason)
{
rcu_read_lock();
__wakeup_flusher_threads_bdi(bdi, reason);
rcu_read_unlock();
}
/*
* Wakeup the flusher threads to start writeback of all currently dirty pages
*/
void wakeup_flusher_threads(enum wb_reason reason)
{
struct backing_dev_info *bdi;
/*
* If we are expecting writeback progress we must submit plugged IO.
*/
if (blk_needs_flush_plug(current))
blk_schedule_flush_plug(current);
rcu_read_lock();
list_for_each_entry_rcu(bdi, &bdi_list, bdi_list)
__wakeup_flusher_threads_bdi(bdi, reason);
rcu_read_unlock();
}
/*
* Wake up bdi's periodically to make sure dirtytime inodes gets
* written back periodically. We deliberately do *not* check the
* b_dirtytime list in wb_has_dirty_io(), since this would cause the
* kernel to be constantly waking up once there are any dirtytime
* inodes on the system. So instead we define a separate delayed work
* function which gets called much more rarely. (By default, only
* once every 12 hours.)
*
* If there is any other write activity going on in the file system,
* this function won't be necessary. But if the only thing that has
* happened on the file system is a dirtytime inode caused by an atime
* update, we need this infrastructure below to make sure that inode
* eventually gets pushed out to disk.
*/
static void wakeup_dirtytime_writeback(struct work_struct *w);
static DECLARE_DELAYED_WORK(dirtytime_work, wakeup_dirtytime_writeback);
static void wakeup_dirtytime_writeback(struct work_struct *w)
{
struct backing_dev_info *bdi;
rcu_read_lock();
list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
struct bdi_writeback *wb;
list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node)
if (!list_empty(&wb->b_dirty_time))
wb_wakeup(wb);
}
rcu_read_unlock();
schedule_delayed_work(&dirtytime_work, dirtytime_expire_interval * HZ);
}
static int __init start_dirtytime_writeback(void)
{
schedule_delayed_work(&dirtytime_work, dirtytime_expire_interval * HZ);
return 0;
}
__initcall(start_dirtytime_writeback);
int dirtytime_interval_handler(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write)
mod_delayed_work(system_wq, &dirtytime_work, 0);
return ret;
}
static noinline void block_dump___mark_inode_dirty(struct inode *inode)
{
if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
struct dentry *dentry;
const char *name = "?";
dentry = d_find_alias(inode);
if (dentry) {
spin_lock(&dentry->d_lock);
name = (const char *) dentry->d_name.name;
}
printk(KERN_DEBUG
"%s(%d): dirtied inode %lu (%s) on %s\n",
current->comm, task_pid_nr(current), inode->i_ino,
name, inode->i_sb->s_id);
if (dentry) {
spin_unlock(&dentry->d_lock);
dput(dentry);
}
}
}
/**
* __mark_inode_dirty - internal function
*
* @inode: inode to mark
* @flags: what kind of dirty (i.e. I_DIRTY_SYNC)
*
* Mark an inode as dirty. Callers should use mark_inode_dirty or
* mark_inode_dirty_sync.
*
* Put the inode on the super block's dirty list.
*
* CAREFUL! We mark it dirty unconditionally, but move it onto the
* dirty list only if it is hashed or if it refers to a blockdev.
* If it was not hashed, it will never be added to the dirty list
* even if it is later hashed, as it will have been marked dirty already.
*
* In short, make sure you hash any inodes _before_ you start marking
* them dirty.
*
* Note that for blockdevs, inode->dirtied_when represents the dirtying time of
* the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of
* the kernel-internal blockdev inode represents the dirtying time of the
* blockdev's pages. This is why for I_DIRTY_PAGES we always use
* page->mapping->host, so the page-dirtying time is recorded in the internal
* blockdev inode.
*/
void __mark_inode_dirty(struct inode *inode, int flags)
{
struct super_block *sb = inode->i_sb;
int dirtytime;
trace_writeback_mark_inode_dirty(inode, flags);
/*
* Don't do this for I_DIRTY_PAGES - that doesn't actually
* dirty the inode itself
*/
if (flags & (I_DIRTY_INODE | I_DIRTY_TIME)) {
trace_writeback_dirty_inode_start(inode, flags);
if (sb->s_op->dirty_inode)
sb->s_op->dirty_inode(inode, flags);
trace_writeback_dirty_inode(inode, flags);
}
if (flags & I_DIRTY_INODE)
flags &= ~I_DIRTY_TIME;
dirtytime = flags & I_DIRTY_TIME;
/*
* Paired with smp_mb() in __writeback_single_inode() for the
* following lockless i_state test. See there for details.
*/
smp_mb();
if (((inode->i_state & flags) == flags) ||
(dirtytime && (inode->i_state & I_DIRTY_INODE)))
return;
if (unlikely(block_dump))
block_dump___mark_inode_dirty(inode);
spin_lock(&inode->i_lock);
if (dirtytime && (inode->i_state & I_DIRTY_INODE))
goto out_unlock_inode;
if ((inode->i_state & flags) != flags) {
const int was_dirty = inode->i_state & I_DIRTY;
inode_attach_wb(inode, NULL);
if (flags & I_DIRTY_INODE)
inode->i_state &= ~I_DIRTY_TIME;
inode->i_state |= flags;
/*
* If the inode is queued for writeback by flush worker, just
* update its dirty state. Once the flush worker is done with
* the inode it will place it on the appropriate superblock
* list, based upon its state.
*/
if (inode->i_state & I_SYNC_QUEUED)
goto out_unlock_inode;
/*
* Only add valid (hashed) inodes to the superblock's
* dirty list. Add blockdev inodes as well.
*/
if (!S_ISBLK(inode->i_mode)) {
if (inode_unhashed(inode))
goto out_unlock_inode;
}
if (inode->i_state & I_FREEING)
goto out_unlock_inode;
/*
* If the inode was already on b_dirty/b_io/b_more_io, don't
* reposition it (that would break b_dirty time-ordering).
*/
if (!was_dirty) {
struct bdi_writeback *wb;
struct list_head *dirty_list;
bool wakeup_bdi = false;
wb = locked_inode_to_wb_and_lock_list(inode);
WARN((wb->bdi->capabilities & BDI_CAP_WRITEBACK) &&
!test_bit(WB_registered, &wb->state),
"bdi-%s not registered\n", bdi_dev_name(wb->bdi));
inode->dirtied_when = jiffies;
if (dirtytime)
inode->dirtied_time_when = jiffies;
if (inode->i_state & I_DIRTY)
dirty_list = &wb->b_dirty;
else
dirty_list = &wb->b_dirty_time;
wakeup_bdi = inode_io_list_move_locked(inode, wb,
dirty_list);
spin_unlock(&wb->list_lock);
trace_writeback_dirty_inode_enqueue(inode);
/*
* If this is the first dirty inode for this bdi,
* we have to wake-up the corresponding bdi thread
* to make sure background write-back happens
* later.
*/
if (wakeup_bdi &&
(wb->bdi->capabilities & BDI_CAP_WRITEBACK))
wb_wakeup_delayed(wb);
return;
}
}
out_unlock_inode:
spin_unlock(&inode->i_lock);
}
EXPORT_SYMBOL(__mark_inode_dirty);
/*
* The @s_sync_lock is used to serialise concurrent sync operations
* to avoid lock contention problems with concurrent wait_sb_inodes() calls.
* Concurrent callers will block on the s_sync_lock rather than doing contending
* walks. The queueing maintains sync(2) required behaviour as all the IO that
* has been issued up to the time this function is enter is guaranteed to be
* completed by the time we have gained the lock and waited for all IO that is
* in progress regardless of the order callers are granted the lock.
*/
static void wait_sb_inodes(struct super_block *sb)
{
LIST_HEAD(sync_list);
/*
* We need to be protected against the filesystem going from
* r/o to r/w or vice versa.
*/
WARN_ON(!rwsem_is_locked(&sb->s_umount));
mutex_lock(&sb->s_sync_lock);
/*
* Splice the writeback list onto a temporary list to avoid waiting on
* inodes that have started writeback after this point.
*
* Use rcu_read_lock() to keep the inodes around until we have a
* reference. s_inode_wblist_lock protects sb->s_inodes_wb as well as
* the local list because inodes can be dropped from either by writeback
* completion.
*/
rcu_read_lock();
spin_lock_irq(&sb->s_inode_wblist_lock);
list_splice_init(&sb->s_inodes_wb, &sync_list);
/*
* Data integrity sync. Must wait for all pages under writeback, because
* there may have been pages dirtied before our sync call, but which had
* writeout started before we write it out. In which case, the inode
* may not be on the dirty list, but we still have to wait for that
* writeout.
*/
while (!list_empty(&sync_list)) {
struct inode *inode = list_first_entry(&sync_list, struct inode,
i_wb_list);
struct address_space *mapping = inode->i_mapping;
/*
* Move each inode back to the wb list before we drop the lock
* to preserve consistency between i_wb_list and the mapping
* writeback tag. Writeback completion is responsible to remove
* the inode from either list once the writeback tag is cleared.
*/
list_move_tail(&inode->i_wb_list, &sb->s_inodes_wb);
/*
* The mapping can appear untagged while still on-list since we
* do not have the mapping lock. Skip it here, wb completion
* will remove it.
*/
if (!mapping_tagged(mapping, PAGECACHE_TAG_WRITEBACK))
continue;
spin_unlock_irq(&sb->s_inode_wblist_lock);
spin_lock(&inode->i_lock);
if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) {
spin_unlock(&inode->i_lock);
spin_lock_irq(&sb->s_inode_wblist_lock);
continue;
}
__iget(inode);
spin_unlock(&inode->i_lock);
rcu_read_unlock();
/*
* We keep the error status of individual mapping so that
* applications can catch the writeback error using fsync(2).
* See filemap_fdatawait_keep_errors() for details.
*/
filemap_fdatawait_keep_errors(mapping);
cond_resched();
iput(inode);
rcu_read_lock();
spin_lock_irq(&sb->s_inode_wblist_lock);
}
spin_unlock_irq(&sb->s_inode_wblist_lock);
rcu_read_unlock();
mutex_unlock(&sb->s_sync_lock);
}
static void __writeback_inodes_sb_nr(struct super_block *sb, unsigned long nr,
enum wb_reason reason, bool skip_if_busy)
{
struct backing_dev_info *bdi = sb->s_bdi;
DEFINE_WB_COMPLETION(done, bdi);
struct wb_writeback_work work = {
.sb = sb,
.sync_mode = WB_SYNC_NONE,
.tagged_writepages = 1,
.done = &done,
.nr_pages = nr,
.reason = reason,
};
if (!bdi_has_dirty_io(bdi) || bdi == &noop_backing_dev_info)
return;
WARN_ON(!rwsem_is_locked(&sb->s_umount));
bdi_split_work_to_wbs(sb->s_bdi, &work, skip_if_busy);
wb_wait_for_completion(&done);
}
/**
* writeback_inodes_sb_nr - writeback dirty inodes from given super_block
* @sb: the superblock
* @nr: the number of pages to write
* @reason: reason why some writeback work initiated
*
* Start writeback on some inodes on this super_block. No guarantees are made
* on how many (if any) will be written, and this function does not wait
* for IO completion of submitted IO.
*/
void writeback_inodes_sb_nr(struct super_block *sb,
unsigned long nr,
enum wb_reason reason)
{
__writeback_inodes_sb_nr(sb, nr, reason, false);
}
EXPORT_SYMBOL(writeback_inodes_sb_nr);
/**
* writeback_inodes_sb - writeback dirty inodes from given super_block
* @sb: the superblock
* @reason: reason why some writeback work was initiated
*
* Start writeback on some inodes on this super_block. No guarantees are made
* on how many (if any) will be written, and this function does not wait
* for IO completion of submitted IO.
*/
void writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
{
return writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason);
}
EXPORT_SYMBOL(writeback_inodes_sb);
/**
* try_to_writeback_inodes_sb - try to start writeback if none underway
* @sb: the superblock
* @reason: reason why some writeback work was initiated
*
* Invoke __writeback_inodes_sb_nr if no writeback is currently underway.
*/
void try_to_writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
{
if (!down_read_trylock(&sb->s_umount))
return;
__writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason, true);
up_read(&sb->s_umount);
}
EXPORT_SYMBOL(try_to_writeback_inodes_sb);
/**
* sync_inodes_sb - sync sb inode pages
* @sb: the superblock
*
* This function writes and waits on any dirty inode belonging to this
* super_block.
*/
void sync_inodes_sb(struct super_block *sb)
{
struct backing_dev_info *bdi = sb->s_bdi;
DEFINE_WB_COMPLETION(done, bdi);
struct wb_writeback_work work = {
.sb = sb,
.sync_mode = WB_SYNC_ALL,
.nr_pages = LONG_MAX,
.range_cyclic = 0,
.done = &done,
.reason = WB_REASON_SYNC,
.for_sync = 1,
};
/*
* Can't skip on !bdi_has_dirty() because we should wait for !dirty
* inodes under writeback and I_DIRTY_TIME inodes ignored by
* bdi_has_dirty() need to be written out too.
*/
if (bdi == &noop_backing_dev_info)
return;
WARN_ON(!rwsem_is_locked(&sb->s_umount));
/* protect against inode wb switch, see inode_switch_wbs_work_fn() */
bdi_down_write_wb_switch_rwsem(bdi);
bdi_split_work_to_wbs(bdi, &work, false);
wb_wait_for_completion(&done);
bdi_up_write_wb_switch_rwsem(bdi);
wait_sb_inodes(sb);
}
EXPORT_SYMBOL(sync_inodes_sb);
/**
* write_inode_now - write an inode to disk
* @inode: inode to write to disk
* @sync: whether the write should be synchronous or not
*
* This function commits an inode to disk immediately if it is dirty. This is
* primarily needed by knfsd.
*
* The caller must either have a ref on the inode or must have set I_WILL_FREE.
*/
int write_inode_now(struct inode *inode, int sync)
{
struct writeback_control wbc = {
.nr_to_write = LONG_MAX,
.sync_mode = sync ? WB_SYNC_ALL : WB_SYNC_NONE,
.range_start = 0,
.range_end = LLONG_MAX,
};
if (!mapping_can_writeback(inode->i_mapping))
wbc.nr_to_write = 0;
might_sleep();
return writeback_single_inode(inode, &wbc);
}
EXPORT_SYMBOL(write_inode_now);
/**
* sync_inode - write an inode and its pages to disk.
* @inode: the inode to sync
* @wbc: controls the writeback mode
*
* sync_inode() will write an inode and its pages to disk. It will also
* correctly update the inode on its superblock's dirty inode lists and will
* update inode->i_state.
*
* The caller must have a ref on the inode.
*/
int sync_inode(struct inode *inode, struct writeback_control *wbc)
{
return writeback_single_inode(inode, wbc);
}
EXPORT_SYMBOL(sync_inode);
/**
* sync_inode_metadata - write an inode to disk
* @inode: the inode to sync
* @wait: wait for I/O to complete.
*
* Write an inode to disk and adjust its dirty state after completion.
*
* Note: only writes the actual inode, no associated data or other metadata.
*/
int sync_inode_metadata(struct inode *inode, int wait)
{
struct writeback_control wbc = {
.sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
.nr_to_write = 0, /* metadata-only */
};
return sync_inode(inode, &wbc);
}
EXPORT_SYMBOL(sync_inode_metadata);