linux_dsm_epyc7002/arch/arm/mach-omap2/sram.c
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00

244 lines
6.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
*
* OMAP SRAM detection and management
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2009-2012 Texas Instruments
* Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include "soc.h"
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "sdrc.h"
#include "sram.h"
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
#define SRAM_BOOTLOADER_SZ 0x00
#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
#define GP_DEVICE 0x300
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
static unsigned long omap_sram_start;
static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
/*
* Depending on the target RAMFS firewall setup, the public usable amount of
* SRAM varies. The default accessible size for all device types is 2k. A GP
* device allows ARM11 but not other initiators for full size. This
* functionality seems ok until some nice security API happens.
*/
static int is_sram_locked(void)
{
if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
/* RAMFW: R/W access to all initiators for all qualifier sets */
if (cpu_is_omap242x()) {
writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
}
if (cpu_is_omap34xx()) {
writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
}
return 0;
} else
return 1; /* assume locked with no PPA or security driver */
}
/*
* The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
static void __init omap_detect_sram(void)
{
omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
omap_sram_skip += SZ_16K;
} else {
omap_sram_size = 0x8000; /* 32K */
}
} else {
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else {
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
else if (cpu_is_omap243x())
omap_sram_size = 0x10000; /* 64K */
}
}
}
/*
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
static void __init omap2_map_sram(void)
{
int cached = 1;
if (cpu_is_omap34xx()) {
/*
* SRAM must be marked as non-cached on OMAP3 since the
* CORE DPLL M2 divider change code (in SRAM) runs with the
* SDRAM controller disabled, and if it is marked cached,
* the ARM may attempt to write cache lines back to SDRAM
* which will cause the system to hang.
*/
cached = 0;
}
omap_map_sram(omap_sram_start, omap_sram_size,
omap_sram_skip, cached);
}
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock)
{
BUG_ON(!_omap2_sram_ddr_init);
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
}
static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
u32 mem_type);
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
{
BUG_ON(!_omap2_sram_reprogram_sdrc);
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
{
BUG_ON(!_omap2_set_prcm);
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
#ifdef CONFIG_SOC_OMAP2420
static int __init omap242x_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
omap242x_sram_ddr_init_sz);
_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
omap242x_sram_reprogram_sdrc_sz);
_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
omap242x_sram_set_prcm_sz);
return 0;
}
#else
static inline int omap242x_sram_init(void)
{
return 0;
}
#endif
#ifdef CONFIG_SOC_OMAP2430
static int __init omap243x_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
omap243x_sram_ddr_init_sz);
_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
omap243x_sram_reprogram_sdrc_sz);
_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
omap243x_sram_set_prcm_sz);
return 0;
}
#else
static inline int omap243x_sram_init(void)
{
return 0;
}
#endif
#ifdef CONFIG_ARCH_OMAP3
void omap3_sram_restore_context(void)
{
omap_sram_reset();
omap_push_sram_idle();
}
static inline int omap34xx_sram_init(void)
{
omap3_sram_restore_context();
return 0;
}
#else
static inline int omap34xx_sram_init(void)
{
return 0;
}
#endif /* CONFIG_ARCH_OMAP3 */
int __init omap_sram_init(void)
{
omap_detect_sram();
omap2_map_sram();
if (cpu_is_omap242x())
omap242x_sram_init();
else if (cpu_is_omap2430())
omap243x_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
return 0;
}