linux_dsm_epyc7002/drivers/usb
Greg Kroah-Hartman b51e0ceed1 USB-serial fixes for v4.12-rc2
Here's a fix for a long-standing issue in the ftdi_sio driver that
 prevented unprivileged users from updating the low-latency flag,
 something which became apparent after a recent change that restored the
 older setting of not using low-latency mode by default.
 
 A run of sparse revealed a couple of endianness issues that are now
 fixed, and addressed is also a user-triggerable division-by-zero in
 io_ti when debugging is enabled.
 
 Finally there are some new device ids, including a simplification of how
 we deal with a couple of older Olimex JTAG adapters.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Johan Hovold <johan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEHszNKQClByu0A+9RQQ3kT97htJUFAlkeotERHGpvaGFuQGtl
 cm5lbC5vcmcACgkQQQ3kT97htJX75xAAsQA0i+Bbafh5zfWyrz5Y5a+jaS6S5ilp
 LMiZnBlqRXkfRHzCB8loUn+EJuFWp4TAr07FypRHPuocDmIkTQ8vx949rmB9mN51
 oGBvmCREhoawBB7Mvh19ZMgzT/4GR4Nhg9RINJDtjsAj442Twn3MVwNQWFx2i9Vj
 Vr6mRy03XxaN8/I/CnHXfYhRvH/zKB2MfCO0GqvoRFQOO2cjjS4Ebwl6KMySr/ok
 Vu1loIsNl7dpxro8tlfJ30u7mOcD72Yg5nD8ED+caEerIaTpeOJl9rjVk/TFVPpq
 Yk2fGU43TvPkj+aNMsXw9PvWBGQwmIxgiohQ4ivKAiCHeQYyHC0EqktqBf+Ru0NR
 LbYztpvlO0I0gHIt2l3uf0ZbsPy05Fi9HyknX/4DUXstaFwOvNzksPNe8E4M0ELX
 mcMSENa6D/FIAZjnxBpssqHaTovCeS355oUE6z8yb/fy3sAFraUwj0BHqV9aXjtr
 XQf8ZaGFWuc61KnezSoIhWVSBxq3aFsazEHP1yZbOoNxDIAg+bjklmees17Y9uDa
 w3KGQUX7+MWc8Ccfp2QEeRnIsqq1O9r22WTL2Q1W3nkP3y90i9QiruZZ/UhxPWsz
 rhgL0ygyNAIRzyfV9fFTxPQiD5IeSnYElZXv7sjQHAARNGzkNVA7YYeKqA2mPw7e
 vNXKKToyERg=
 =psyq
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.12-rc2

Here's a fix for a long-standing issue in the ftdi_sio driver that
prevented unprivileged users from updating the low-latency flag,
something which became apparent after a recent change that restored the
older setting of not using low-latency mode by default.

A run of sparse revealed a couple of endianness issues that are now
fixed, and addressed is also a user-triggerable division-by-zero in
io_ti when debugging is enabled.

Finally there are some new device ids, including a simplification of how
we deal with a couple of older Olimex JTAG adapters.

All have been in linux-next with no reported issues.

Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-19 10:10:07 +02:00
..
atm usb: atm: remove unnecessary code 2017-03-16 17:58:44 +09:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea Two changes for this v4.12-rc1: 2017-04-18 16:52:20 +02:00
class USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" 2017-04-25 20:04:28 +02:00
common DeviceTree for 4.12: 2017-05-05 19:33:07 -07:00
core USB: hub: fix SS max number of ports 2017-05-17 11:53:02 +02:00
dwc2 usb: changes for v4.12 2017-04-11 16:47:26 +02:00
dwc3 usb: dwc3: keystone: check return value 2017-05-16 14:11:04 +03:00
early usb/early: Add driver for xhci debug capability 2017-03-21 12:30:05 +01:00
gadget USB: gadget: dummy_hcd: fix hub-descriptor removable fields 2017-05-17 11:53:02 +02:00
host usb: host: xhci-plat: propagate return value of platform_get_irq() 2017-05-18 15:19:42 +02:00
image sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
isp1760 usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW 2017-03-17 13:16:56 +09:00
misc USB: iowarrior: fix info ioctl on big-endian hosts 2017-05-17 11:27:41 +02:00
mon sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
mtu3 usb: mtu3: Replace the extcon API 2017-04-11 10:58:21 +03:00
musb usb: musb: tusb6010_omap: Do not reset the other direction's packet size 2017-05-18 15:21:17 +02:00
phy usb: changes for v4.12 2017-04-11 16:47:26 +02:00
renesas_usbhs usb: renesas_usbhs: Replace the deprecated extcon API 2017-01-24 11:04:14 +02:00
serial USB: serial: qcserial: add more Lenovo EM74xx device IDs 2017-05-17 17:10:57 +02:00
storage USB: ene_usb6250: fix DMA to the stack 2017-05-17 11:27:40 +02:00
typec usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY 2017-03-23 13:48:44 +01:00
usbip USB: usbip: fix nonconforming hub descriptor 2017-05-17 11:53:02 +02:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-14 17:07:30 +08:00
Kconfig usb: USB Type-C connector class 2017-03-23 13:48:44 +01:00
Makefile USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
README
usb-skeleton.c USB: usb-skeleton: refactor endpoint retrieval 2017-03-23 13:54:08 +01:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.