AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-14 01:56:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
a929478f67
linux_dsm_epyc7002/arch/arm/mach-shmobile/board-lager.c
Linus Torvalds f2c73464d7 ARM: SoC cleanups for 3.14 
This is the branch where we usually queue up cleanup efforts, moving
 drivers out of the architecture directory, header file restructuring,
 etc. Sometimes they tangle with new development so it's hard to keep it
 strictly to cleanups.
 
 Some of the things included in this branch are:
 
 * Atmel SAMA5 conversion to common clock
 * Reset framework conversion for tegra platforms
  - Some of this depends on tegra clock driver reworks that are shared with Mike
    Turquette's clk tree.
 * Tegra DMA refactoring, which are shared branches with the DMA tree.
 * Removal of some header files on exynos to prepare for multiplatform
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4Vf7AAoJEIwa5zzehBx3f9UP/jwMlbfbSZHfNQ/QG0SqZ9RD
 zvddyDMHY/qXnzgF3Dax+JR9BDDVy8AlQe713FCoiHJZggWRAbbavkx8gxITDrZQ
 6NYaEkkuVxqyM8APl3PwMqYm8UZ8MUf4lCltlOA4jkesY9vue91AFnfyKh2CvHrn
 Leg4XT6mFzf/vYDL6RbvTz/Qr253uv3KvYBxkeiRNa0Y7OXRemEXSOfgxh0YGxUl
 LZ2IWQFOh/DH4kaeQI8V4G67X3ceHiFyhCnl0CPwfxaZaNBVaxvIFgIUTdetS6Sb
 zcXa029tE/Dfsr55vZAv9LUHEipCSOeE5rn2EJWehTWyM7vJ42Eozqgh+zfCjXS7
 Ib6g2npsvIluQit/RdITu44h5yZlrQsLgKTGJ8jjXqbT4HQ/746W8b/TP0YLtbw7
 N8oqr7k4vsZyF0dAYZQtfQUZeGISz67UbFcdzl9tmYOR7HFuAYkAQYst77zkVJf8
 om59BAYYTG5FNjQ4I9AKUfJzxXYveI6AKpXSCCZiahpFM2D1CJIzp9Wi0GwK1HRR
 sFVWhS0dajvz63pVVC2tw5Sq4J7onRRNGIXFPoE5fkmlelm0/q0zzGjw3Z0nTqbZ
 8zxuwuy2FfPJK11GbUAIhAgn1sCLYyAhl6IE+FsanGeMOSGIMrH0v5/HphAxoCXt
 BvqMDogyLoGPce1Gm3pJ
 =3CcT
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is the branch where we usually queue up cleanup efforts, moving
  drivers out of the architecture directory, header file restructuring,
  etc.  Sometimes they tangle with new development so it's hard to keep
  it strictly to cleanups.

  Some of the things included in this branch are:

   * Atmel SAMA5 conversion to common clock
   * Reset framework conversion for tegra platforms
    - Some of this depends on tegra clock driver reworks that are shared
      with Mike Turquette's clk tree.
   * Tegra DMA refactoring, which are shared branches with the DMA tree.
   * Removal of some header files on exynos to prepare for
     multiplatform"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
  ARM: mvebu: remove prototypes of non-existing functions from common.h
  ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  ARM: EXYNOS: Kill exynos_pm_late_initcall()
  ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
  ARM: at91: switch Calao QIL-A9260 board to DT
  clk: at91: fix pmc_clk_ids data type attriubte
  PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
  ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
  ...
2014-01-23 18:36:55 -08:00

412 lines
12 KiB
C
Raw Blame History

/*
* Lager board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/rcar-du.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
/* DU */
static struct rcar_du_encoder_data lager_du_encoders[] = {
{
.type = RCAR_DU_ENCODER_VGA,
.output = RCAR_DU_OUTPUT_DPAD0,
}, {
.type = RCAR_DU_ENCODER_NONE,
.output = RCAR_DU_OUTPUT_LVDS1,
.connector.lvds.panel = {
.width_mm = 210,
.height_mm = 158,
.mode = {
.clock = 65000,
.hdisplay = 1024,
.hsync_start = 1048,
.hsync_end = 1184,
.htotal = 1344,
.vdisplay = 768,
.vsync_start = 771,
.vsync_end = 777,
.vtotal = 806,
.flags = 0,
},
},
},
};
static const struct rcar_du_platform_data lager_du_pdata __initconst = {
.encoders = lager_du_encoders,
.num_encoders = ARRAY_SIZE(lager_du_encoders),
};
static const struct resource du_resources[] __initconst = {
DEFINE_RES_MEM(0xfeb00000, 0x70000),
DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
DEFINE_RES_IRQ(gic_spi(256)),
DEFINE_RES_IRQ(gic_spi(268)),
DEFINE_RES_IRQ(gic_spi(269)),
};
static void __init lager_add_du_device(void)
{
struct platform_device_info info = {
.name = "rcar-du-r8a7790",
.id = -1,
.res = du_resources,
.num_res = ARRAY_SIZE(du_resources),
.data = &lager_du_pdata,
.size_data = sizeof(lager_du_pdata),
.dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&info);
}
/* LEDS */
static struct gpio_led lager_leds[] = {
{
.name = "led8",
.gpio = RCAR_GP_PIN(5, 17),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led7",
.gpio = RCAR_GP_PIN(4, 23),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led6",
.gpio = RCAR_GP_PIN(4, 22),
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
.leds = lager_leds,
.num_leds = ARRAY_SIZE(lager_leds),
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
.wakeup = 1, .debounce_interval = 20 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"),
GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"),
GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"),
GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"),
};
static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
/* Fixed 3.3V regulator to be used by MMCIF */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
};
/*
* SDHI regulator macro
*
** FIXME**
* Lager board vqmmc is provided via DA9063 PMIC chip,
* and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
* but, it doesn't have regulator support at this point.
* It uses gpio-regulator for vqmmc as quick-hack.
*/
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
.constraints = { \
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
.supply_name = "SDHI" #idx "Vcc", \
.microvolts = 3300000, \
.gpio = vdd_pin, \
.enable_high = 1, \
.init_data = &vcc_sdhi##idx##_init_data, \
}; \
\
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
.constraints = { \
.input_uV = 3300000, \
.min_uV = 1800000, \
.max_uV = 3300000, \
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static struct gpio vccq_sdhi##idx##_gpio = \
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
\
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
{ .value = 1800000, .gpios = 0 }, \
{ .value = 3300000, .gpios = 1 }, \
}; \
\
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
.supply_name = "vqmmc", \
.gpios = &vccq_sdhi##idx##_gpio, \
.nr_gpios = 1, \
.states = vccq_sdhi##idx##_states, \
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
.type = REGULATOR_VOLTAGE, \
.init_data = &vccq_sdhi##idx##_init_data, \
};
SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
/* MMCIF */
static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
.clk_ctrl2_present = true,
.ccs_unsupported = true,
};
static const struct resource mmcif1_resources[] __initconst = {
DEFINE_RES_MEM(0xee220000, 0x80),
DEFINE_RES_IRQ(gic_spi(170)),
};
/* Ether */
static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
static const struct resource ether_resources[] __initconst = {
DEFINE_RES_MEM(0xee700000, 0x400),
DEFINE_RES_IRQ(gic_spi(162)),
};
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
static struct mtd_partition spi_flash_part[] = {
/* Reserved for user loader program, read-only */
{
.name = "loader",
.offset = 0,
.size = SZ_256K,
.mask_flags = MTD_WRITEABLE,
},
/* Reserved for user program, read-only */
{
.name = "user",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = MTD_WRITEABLE,
},
/* All else is writable (e.g. JFFS2) */
{
.name = "flash",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
};
static struct flash_platform_data spi_flash_data = {
.name = "m25p80",
.parts = spi_flash_part,
.nr_parts = ARRAY_SIZE(spi_flash_part),
.type = "s25fl512s",
};
static const struct rspi_plat_data qspi_pdata __initconst = {
.num_chipselect = 1,
};
static const struct spi_board_info spi_info[] __initconst = {
{
.modalias = "m25p80",
.platform_data = &spi_flash_data,
.mode = SPI_MODE_0,
.max_speed_hz = 30000000,
.bus_num = 0,
.chip_select = 0,
},
};
/* QSPI resource */
static const struct resource qspi_resources[] __initconst = {
DEFINE_RES_MEM(0xe6b10000, 0x1000),
DEFINE_RES_IRQ(gic_spi(184)),
};
static const struct pinctrl_map lager_pinctrl_map[] = {
/* DU (CN10: ARGB0, CN13: LVDS) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_rgb666", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_sync_1", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_clk_out_0", "du"),
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
"scif0_data", "scif0"),
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
"scif1_data", "scif1"),
/* MMCIF1 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_data8", "mmc1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_ctrl", "mmc1"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_link", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_mdio", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_rmii", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"intc_irq0", "intc"),
};
static void __init lager_add_standard_devices(void)
{
int fixed_regulator_idx = 0;
int gpio_regulator_idx = 0;
r8a7790_clock_init();
pinctrl_register_mappings(lager_pinctrl_map,
ARRAY_SIZE(lager_pinctrl_map));
r8a7790_pinmux_init();
r8a7790_add_standard_devices();
platform_device_register_data(&platform_bus, "leds-gpio", -1,
&lager_leds_pdata,
sizeof(lager_leds_pdata));
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&lager_keys_pdata,
sizeof(lager_keys_pdata));
regulator_register_always_on(fixed_regulator_idx++,
"fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
&mmcif1_pdata, sizeof(mmcif1_pdata));
platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
ether_resources,
ARRAY_SIZE(ether_resources),
&ether_pdata, sizeof(ether_pdata));
lager_add_du_device();
platform_device_register_resndata(&platform_bus, "qspi", 0,
qspi_resources,
ARRAY_SIZE(qspi_resources),
&qspi_pdata, sizeof(qspi_pdata));
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
}
/*
* Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
* 14-15. We have to set them back to 01 from the default 00 value each time
* the PHY is reset. It's also important because the PHY's LED0 signal is
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
* bounce on and off after each packet, which we apparently want to avoid.
*/
static int lager_ksz8041_fixup(struct phy_device *phydev)
{
u16 phyctrl1 = phy_read(phydev, 0x1e);
phyctrl1 &= ~0xc000;
phyctrl1 |= 0x4000;
return phy_write(phydev, 0x1e, phyctrl1);
}
static void __init lager_init(void)
{
lager_add_standard_devices();
if (IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_id("r8a7790-ether-ff:01",
lager_ksz8041_fixup);
}
static const char * const lager_boards_compat_dt[] __initconst = {
"renesas,lager",
NULL,
};
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.init_late = shmobile_init_late,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink