linux_dsm_epyc7002/sound/soc/ux500/ux500_msp_i2s.h
Fabio Baltieri 20413113ff ASoC: ux500: Set DMA address during device init
Add a field with the tx/rx register address to the DMA parameters
structure, and set it to the correct address during device
initialization.

This address used to be hardcoded in the DMA controller driver, it now
needs to be explicitly figured out by the device driver.

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12 17:02:48 +01:00

503 lines
12 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2012
*
* Author: Ola Lilja <ola.o.lilja@stericsson.com>,
* for ST-Ericsson.
*
* License terms:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef UX500_MSP_I2S_H
#define UX500_MSP_I2S_H
#include <linux/platform_device.h>
#include <linux/platform_data/asoc-ux500-msp.h>
#define MSP_INPUT_FREQ_APB 48000000
/*** Stereo mode. Used for APB data accesses as 16 bits accesses (mono),
* 32 bits accesses (stereo).
***/
enum msp_stereo_mode {
MSP_MONO,
MSP_STEREO
};
/* Direction (Transmit/Receive mode) */
enum msp_direction {
MSP_TX = 1,
MSP_RX = 2
};
/* Transmit and receive configuration register */
#define MSP_BIG_ENDIAN 0x00000000
#define MSP_LITTLE_ENDIAN 0x00001000
#define MSP_UNEXPECTED_FS_ABORT 0x00000000
#define MSP_UNEXPECTED_FS_IGNORE 0x00008000
#define MSP_NON_MODE_BIT_MASK 0x00009000
/* Global configuration register */
#define RX_ENABLE 0x00000001
#define RX_FIFO_ENABLE 0x00000002
#define RX_SYNC_SRG 0x00000010
#define RX_CLK_POL_RISING 0x00000020
#define RX_CLK_SEL_SRG 0x00000040
#define TX_ENABLE 0x00000100
#define TX_FIFO_ENABLE 0x00000200
#define TX_SYNC_SRG_PROG 0x00001800
#define TX_SYNC_SRG_AUTO 0x00001000
#define TX_CLK_POL_RISING 0x00002000
#define TX_CLK_SEL_SRG 0x00004000
#define TX_EXTRA_DELAY_ENABLE 0x00008000
#define SRG_ENABLE 0x00010000
#define FRAME_GEN_ENABLE 0x00100000
#define SRG_CLK_SEL_APB 0x00000000
#define RX_FIFO_SYNC_HI 0x00000000
#define TX_FIFO_SYNC_HI 0x00000000
#define SPI_CLK_MODE_NORMAL 0x00000000
#define MSP_FRAME_SIZE_AUTO -1
#define MSP_DR 0x00
#define MSP_GCR 0x04
#define MSP_TCF 0x08
#define MSP_RCF 0x0c
#define MSP_SRG 0x10
#define MSP_FLR 0x14
#define MSP_DMACR 0x18
#define MSP_IMSC 0x20
#define MSP_RIS 0x24
#define MSP_MIS 0x28
#define MSP_ICR 0x2c
#define MSP_MCR 0x30
#define MSP_RCV 0x34
#define MSP_RCM 0x38
#define MSP_TCE0 0x40
#define MSP_TCE1 0x44
#define MSP_TCE2 0x48
#define MSP_TCE3 0x4c
#define MSP_RCE0 0x60
#define MSP_RCE1 0x64
#define MSP_RCE2 0x68
#define MSP_RCE3 0x6c
#define MSP_IODLY 0x70
#define MSP_ITCR 0x80
#define MSP_ITIP 0x84
#define MSP_ITOP 0x88
#define MSP_TSTDR 0x8c
#define MSP_PID0 0xfe0
#define MSP_PID1 0xfe4
#define MSP_PID2 0xfe8
#define MSP_PID3 0xfec
#define MSP_CID0 0xff0
#define MSP_CID1 0xff4
#define MSP_CID2 0xff8
#define MSP_CID3 0xffc
/* Protocol dependant parameters list */
#define RX_ENABLE_MASK BIT(0)
#define RX_FIFO_ENABLE_MASK BIT(1)
#define RX_FSYNC_MASK BIT(2)
#define DIRECT_COMPANDING_MASK BIT(3)
#define RX_SYNC_SEL_MASK BIT(4)
#define RX_CLK_POL_MASK BIT(5)
#define RX_CLK_SEL_MASK BIT(6)
#define LOOPBACK_MASK BIT(7)
#define TX_ENABLE_MASK BIT(8)
#define TX_FIFO_ENABLE_MASK BIT(9)
#define TX_FSYNC_MASK BIT(10)
#define TX_MSP_TDR_TSR BIT(11)
#define TX_SYNC_SEL_MASK (BIT(12) | BIT(11))
#define TX_CLK_POL_MASK BIT(13)
#define TX_CLK_SEL_MASK BIT(14)
#define TX_EXTRA_DELAY_MASK BIT(15)
#define SRG_ENABLE_MASK BIT(16)
#define SRG_CLK_POL_MASK BIT(17)
#define SRG_CLK_SEL_MASK (BIT(19) | BIT(18))
#define FRAME_GEN_EN_MASK BIT(20)
#define SPI_CLK_MODE_MASK (BIT(22) | BIT(21))
#define SPI_BURST_MODE_MASK BIT(23)
#define RXEN_SHIFT 0
#define RFFEN_SHIFT 1
#define RFSPOL_SHIFT 2
#define DCM_SHIFT 3
#define RFSSEL_SHIFT 4
#define RCKPOL_SHIFT 5
#define RCKSEL_SHIFT 6
#define LBM_SHIFT 7
#define TXEN_SHIFT 8
#define TFFEN_SHIFT 9
#define TFSPOL_SHIFT 10
#define TFSSEL_SHIFT 11
#define TCKPOL_SHIFT 13
#define TCKSEL_SHIFT 14
#define TXDDL_SHIFT 15
#define SGEN_SHIFT 16
#define SCKPOL_SHIFT 17
#define SCKSEL_SHIFT 18
#define FGEN_SHIFT 20
#define SPICKM_SHIFT 21
#define TBSWAP_SHIFT 28
#define RCKPOL_MASK BIT(0)
#define TCKPOL_MASK BIT(0)
#define SPICKM_MASK (BIT(1) | BIT(0))
#define MSP_RX_CLKPOL_BIT(n) ((n & RCKPOL_MASK) << RCKPOL_SHIFT)
#define MSP_TX_CLKPOL_BIT(n) ((n & TCKPOL_MASK) << TCKPOL_SHIFT)
#define P1ELEN_SHIFT 0
#define P1FLEN_SHIFT 3
#define DTYP_SHIFT 10
#define ENDN_SHIFT 12
#define DDLY_SHIFT 13
#define FSIG_SHIFT 15
#define P2ELEN_SHIFT 16
#define P2FLEN_SHIFT 19
#define P2SM_SHIFT 26
#define P2EN_SHIFT 27
#define FSYNC_SHIFT 15
#define P1ELEN_MASK 0x00000007
#define P2ELEN_MASK 0x00070000
#define P1FLEN_MASK 0x00000378
#define P2FLEN_MASK 0x03780000
#define DDLY_MASK 0x00003000
#define DTYP_MASK 0x00000600
#define P2SM_MASK 0x04000000
#define P2EN_MASK 0x08000000
#define ENDN_MASK 0x00001000
#define TFSPOL_MASK 0x00000400
#define TBSWAP_MASK 0x30000000
#define COMPANDING_MODE_MASK 0x00000c00
#define FSYNC_MASK 0x00008000
#define MSP_P1_ELEM_LEN_BITS(n) (n & P1ELEN_MASK)
#define MSP_P2_ELEM_LEN_BITS(n) (((n) << P2ELEN_SHIFT) & P2ELEN_MASK)
#define MSP_P1_FRAME_LEN_BITS(n) (((n) << P1FLEN_SHIFT) & P1FLEN_MASK)
#define MSP_P2_FRAME_LEN_BITS(n) (((n) << P2FLEN_SHIFT) & P2FLEN_MASK)
#define MSP_DATA_DELAY_BITS(n) (((n) << DDLY_SHIFT) & DDLY_MASK)
#define MSP_DATA_TYPE_BITS(n) (((n) << DTYP_SHIFT) & DTYP_MASK)
#define MSP_P2_START_MODE_BIT(n) ((n << P2SM_SHIFT) & P2SM_MASK)
#define MSP_P2_ENABLE_BIT(n) ((n << P2EN_SHIFT) & P2EN_MASK)
#define MSP_SET_ENDIANNES_BIT(n) ((n << ENDN_SHIFT) & ENDN_MASK)
#define MSP_FSYNC_POL(n) ((n << TFSPOL_SHIFT) & TFSPOL_MASK)
#define MSP_DATA_WORD_SWAP(n) ((n << TBSWAP_SHIFT) & TBSWAP_MASK)
#define MSP_SET_COMPANDING_MODE(n) ((n << DTYP_SHIFT) & \
COMPANDING_MODE_MASK)
#define MSP_SET_FSYNC_IGNORE(n) ((n << FSYNC_SHIFT) & FSYNC_MASK)
/* Flag register */
#define RX_BUSY BIT(0)
#define RX_FIFO_EMPTY BIT(1)
#define RX_FIFO_FULL BIT(2)
#define TX_BUSY BIT(3)
#define TX_FIFO_EMPTY BIT(4)
#define TX_FIFO_FULL BIT(5)
#define RBUSY_SHIFT 0
#define RFE_SHIFT 1
#define RFU_SHIFT 2
#define TBUSY_SHIFT 3
#define TFE_SHIFT 4
#define TFU_SHIFT 5
/* Multichannel control register */
#define RMCEN_SHIFT 0
#define RMCSF_SHIFT 1
#define RCMPM_SHIFT 3
#define TMCEN_SHIFT 5
#define TNCSF_SHIFT 6
/* Sample rate generator register */
#define SCKDIV_SHIFT 0
#define FRWID_SHIFT 10
#define FRPER_SHIFT 16
#define SCK_DIV_MASK 0x0000003FF
#define FRAME_WIDTH_BITS(n) (((n) << FRWID_SHIFT) & 0x0000FC00)
#define FRAME_PERIOD_BITS(n) (((n) << FRPER_SHIFT) & 0x1FFF0000)
/* DMA controller register */
#define RX_DMA_ENABLE BIT(0)
#define TX_DMA_ENABLE BIT(1)
#define RDMAE_SHIFT 0
#define TDMAE_SHIFT 1
/* Interrupt Register */
#define RX_SERVICE_INT BIT(0)
#define RX_OVERRUN_ERROR_INT BIT(1)
#define RX_FSYNC_ERR_INT BIT(2)
#define RX_FSYNC_INT BIT(3)
#define TX_SERVICE_INT BIT(4)
#define TX_UNDERRUN_ERR_INT BIT(5)
#define TX_FSYNC_ERR_INT BIT(6)
#define TX_FSYNC_INT BIT(7)
#define ALL_INT 0x000000ff
/* MSP test control register */
#define MSP_ITCR_ITEN BIT(0)
#define MSP_ITCR_TESTFIFO BIT(1)
#define RMCEN_BIT 0
#define RMCSF_BIT 1
#define RCMPM_BIT 3
#define TMCEN_BIT 5
#define TNCSF_BIT 6
/* Single or dual phase mode */
enum msp_phase_mode {
MSP_SINGLE_PHASE,
MSP_DUAL_PHASE
};
/* Frame length */
enum msp_frame_length {
MSP_FRAME_LEN_1 = 0,
MSP_FRAME_LEN_2 = 1,
MSP_FRAME_LEN_4 = 3,
MSP_FRAME_LEN_8 = 7,
MSP_FRAME_LEN_12 = 11,
MSP_FRAME_LEN_16 = 15,
MSP_FRAME_LEN_20 = 19,
MSP_FRAME_LEN_32 = 31,
MSP_FRAME_LEN_48 = 47,
MSP_FRAME_LEN_64 = 63
};
/* Element length */
enum msp_elem_length {
MSP_ELEM_LEN_8 = 0,
MSP_ELEM_LEN_10 = 1,
MSP_ELEM_LEN_12 = 2,
MSP_ELEM_LEN_14 = 3,
MSP_ELEM_LEN_16 = 4,
MSP_ELEM_LEN_20 = 5,
MSP_ELEM_LEN_24 = 6,
MSP_ELEM_LEN_32 = 7
};
enum msp_data_xfer_width {
MSP_DATA_TRANSFER_WIDTH_BYTE,
MSP_DATA_TRANSFER_WIDTH_HALFWORD,
MSP_DATA_TRANSFER_WIDTH_WORD
};
enum msp_frame_sync {
MSP_FSYNC_UNIGNORE = 0,
MSP_FSYNC_IGNORE = 1,
};
enum msp_phase2_start_mode {
MSP_PHASE2_START_MODE_IMEDIATE,
MSP_PHASE2_START_MODE_FSYNC
};
enum msp_btf {
MSP_BTF_MS_BIT_FIRST = 0,
MSP_BTF_LS_BIT_FIRST = 1
};
enum msp_fsync_pol {
MSP_FSYNC_POL_ACT_HI = 0,
MSP_FSYNC_POL_ACT_LO = 1
};
/* Data delay (in bit clock cycles) */
enum msp_delay {
MSP_DELAY_0 = 0,
MSP_DELAY_1 = 1,
MSP_DELAY_2 = 2,
MSP_DELAY_3 = 3
};
/* Configurations of clocks (transmit, receive or sample rate generator) */
enum msp_edge {
MSP_FALLING_EDGE = 0,
MSP_RISING_EDGE = 1,
};
enum msp_hws {
MSP_SWAP_NONE = 0,
MSP_SWAP_BYTE_PER_WORD = 1,
MSP_SWAP_BYTE_PER_HALF_WORD = 2,
MSP_SWAP_HALF_WORD_PER_WORD = 3
};
enum msp_compress_mode {
MSP_COMPRESS_MODE_LINEAR = 0,
MSP_COMPRESS_MODE_MU_LAW = 2,
MSP_COMPRESS_MODE_A_LAW = 3
};
enum msp_expand_mode {
MSP_EXPAND_MODE_LINEAR = 0,
MSP_EXPAND_MODE_LINEAR_SIGNED = 1,
MSP_EXPAND_MODE_MU_LAW = 2,
MSP_EXPAND_MODE_A_LAW = 3
};
#define MSP_FRAME_PERIOD_IN_MONO_MODE 256
#define MSP_FRAME_PERIOD_IN_STEREO_MODE 32
#define MSP_FRAME_WIDTH_IN_STEREO_MODE 16
enum msp_protocol {
MSP_I2S_PROTOCOL,
MSP_PCM_PROTOCOL,
MSP_PCM_COMPAND_PROTOCOL,
MSP_INVALID_PROTOCOL
};
/*
* No of registers to backup during
* suspend resume
*/
#define MAX_MSP_BACKUP_REGS 36
enum i2s_direction_t {
MSP_DIR_TX = 0x01,
MSP_DIR_RX = 0x02,
};
enum msp_data_size {
MSP_DATA_BITS_DEFAULT = -1,
MSP_DATA_BITS_8 = 0x00,
MSP_DATA_BITS_10,
MSP_DATA_BITS_12,
MSP_DATA_BITS_14,
MSP_DATA_BITS_16,
MSP_DATA_BITS_20,
MSP_DATA_BITS_24,
MSP_DATA_BITS_32,
};
enum msp_state {
MSP_STATE_IDLE = 0,
MSP_STATE_CONFIGURED = 1,
MSP_STATE_RUNNING = 2,
};
enum msp_rx_comparison_enable_mode {
MSP_COMPARISON_DISABLED = 0,
MSP_COMPARISON_NONEQUAL_ENABLED = 2,
MSP_COMPARISON_EQUAL_ENABLED = 3
};
struct msp_multichannel_config {
bool rx_multichannel_enable;
bool tx_multichannel_enable;
enum msp_rx_comparison_enable_mode rx_comparison_enable_mode;
u8 padding;
u32 comparison_value;
u32 comparison_mask;
u32 rx_channel_0_enable;
u32 rx_channel_1_enable;
u32 rx_channel_2_enable;
u32 rx_channel_3_enable;
u32 tx_channel_0_enable;
u32 tx_channel_1_enable;
u32 tx_channel_2_enable;
u32 tx_channel_3_enable;
};
struct msp_protdesc {
u32 rx_phase_mode;
u32 tx_phase_mode;
u32 rx_phase2_start_mode;
u32 tx_phase2_start_mode;
u32 rx_byte_order;
u32 tx_byte_order;
u32 rx_frame_len_1;
u32 rx_frame_len_2;
u32 tx_frame_len_1;
u32 tx_frame_len_2;
u32 rx_elem_len_1;
u32 rx_elem_len_2;
u32 tx_elem_len_1;
u32 tx_elem_len_2;
u32 rx_data_delay;
u32 tx_data_delay;
u32 rx_clk_pol;
u32 tx_clk_pol;
u32 rx_fsync_pol;
u32 tx_fsync_pol;
u32 rx_half_word_swap;
u32 tx_half_word_swap;
u32 compression_mode;
u32 expansion_mode;
u32 frame_sync_ignore;
u32 frame_period;
u32 frame_width;
u32 clocks_per_frame;
};
struct ux500_msp_config {
unsigned int f_inputclk;
unsigned int rx_clk_sel;
unsigned int tx_clk_sel;
unsigned int srg_clk_sel;
unsigned int rx_fsync_pol;
unsigned int tx_fsync_pol;
unsigned int rx_fsync_sel;
unsigned int tx_fsync_sel;
unsigned int rx_fifo_config;
unsigned int tx_fifo_config;
unsigned int loopback_enable;
unsigned int tx_data_enable;
unsigned int default_protdesc;
struct msp_protdesc protdesc;
int multichannel_configured;
struct msp_multichannel_config multichannel_config;
unsigned int direction;
unsigned int protocol;
unsigned int frame_freq;
enum msp_data_size data_size;
unsigned int def_elem_len;
unsigned int iodelay;
};
struct ux500_msp_dma_params {
unsigned int data_size;
dma_addr_t tx_rx_addr;
struct stedma40_chan_cfg *dma_cfg;
};
struct ux500_msp {
enum msp_i2s_id id;
void __iomem *registers;
struct device *dev;
struct ux500_msp_dma_params playback_dma_data;
struct ux500_msp_dma_params capture_dma_data;
enum msp_state msp_state;
int def_elem_len;
unsigned int dir_busy;
int loopback_enable;
unsigned int f_bitclk;
};
struct msp_i2s_platform_data;
int ux500_msp_i2s_init_msp(struct platform_device *pdev,
struct ux500_msp **msp_p,
struct msp_i2s_platform_data *platform_data);
void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev,
struct ux500_msp *msp);
int ux500_msp_i2s_open(struct ux500_msp *msp, struct ux500_msp_config *config);
int ux500_msp_i2s_close(struct ux500_msp *msp,
unsigned int dir);
int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd,
int direction);
#endif