mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 15:56:49 +07:00
d799a4de0a
The bgpio_init() takes one of two arguments to specify a register to set the direction of the GPIO line: either dirout that indicates that a 1 in the bit in that register sets the corresponding line to output, or dirin which indicates that a 1 in the bit in that register sets the corresponding line to input. Conversely setting the bit to 0 on these will turn the line into input and output respectively. One of these can be defined but not both. This means that a platform that sets a bit to 1 for output only defines dirout and a platform that sets a bit to 0 for output only defines dirin. In short this defines the polarity of the direction register. Both can also be left as NULL meaning the GPIO chip is either input only or output only. Tomer Maimon discovered that for get/set chips (those where the get and set registers are defined but no separate clear register, and specifying BGPIOF_READ_OUTPUT_REG_SET so that we say we want to read the output value from the SET register) we are unconditionally reading the value from the SET register when the direction bit is 1 and from the DAT register when the direction bit is 0, not taking the direction bit polarity into account. It would be expected that when the direction bit is inverted (dirin is defined but not dirout) we read the current value from the DAT register when the bit is 1 and from the SET register when the bit is 0. Currently only some versions of ATH79, brcmstb, some versions of CLP711x, GE, IOP and Loongson use the dirin mode (a 1 in the register means input). They are unaffected because BGPIOF_READ_OUTPUT_REG_SET is not set on any of them. (They do not read back the SET register to figure out the output value.) So this is no regression with current drivers. However the behaviour is wrong and does not work with Tomer's new driver where he needs to use the BGIOF_READ_OUTPUT_REG_SET. This fixes the above issue by: - Instead of defining separate functions for the inverted case, set up a flag in the gpio_chip that indicates that the direction is inverted. - Remove the special inverted functions for setting input/output and getting the direction, rely on the flag instead. - Respect this flag in bgpio_get_set() and bgpio_get_set_multiple() Reported-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|---|---|---|
| .. | ||
| aspeed.h | ||
| consumer.h | ||
| driver.h | ||
| gpio-reg.h | ||
| machine.h | ||