linux_dsm_epyc7002/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
Lad, Prabhakar b610b5928d [media] media: i2c: tvp514x: add OF support
add OF support for the tvp514x driver.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 11:29:09 -03:00

45 lines
1.2 KiB
Plaintext

* Texas Instruments TVP514x video decoder
The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
digital video decoder that digitizes and decodes all popular baseband analog
video formats into digital video component. The tvp514x decoder supports analog-
to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
conversion and decoding of NTSC, PAL and SECAM composite and S-video into
component YCbCr.
Required Properties :
- compatible : value should be either one among the following
(a) "ti,tvp5146" for tvp5146 decoder.
(b) "ti,tvp5146m2" for tvp5146m2 decoder.
(c) "ti,tvp5147" for tvp5147 decoder.
(d) "ti,tvp5147m1" for tvp5147m1 decoder.
- hsync-active: HSYNC Polarity configuration for endpoint.
- vsync-active: VSYNC Polarity configuration for endpoint.
- pclk-sample: Clock polarity of the endpoint.
For further reading on port node refer to Documentation/devicetree/bindings/
media/video-interfaces.txt.
Example:
i2c0@1c22000 {
...
...
tvp514x@5c {
compatible = "ti,tvp5146";
reg = <0x5c>;
port {
tvp514x_1: endpoint {
hsync-active = <1>;
vsync-active = <1>;
pclk-sample = <0>;
};
};
};
...
};