AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-18 12:47:02 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
a870271968
linux_dsm_epyc7002/arch/arm/boot/dts/rk3188-px3-evb.dts
Andy Yan e9e79d5395 ARM: dts: rockchip: use pin constants to describe gpios 
Use macros to describe gpios will make the dts easier to
read and write.

All the modifications done with sed:

sed -i -e 's/ 0  GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 1  GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 2  GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
.......
.......
sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*

Tested with:

for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i);  done

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[also adapted the gpio interrupts]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-02 14:25:19 +01:00

329 lines
7.3 KiB
Plaintext
Raw Blame History

/*
* Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3188.dtsi"
/ {
model = "Rockchip PX3-EVB";
compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
chosen {
stdout-path = "serial2:115200n8";
};
memory@60000000 {
reg = <0x60000000 0x80000000>;
device_type = "memory";
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
wakeup-source;
debounce-interval = <100>;
};
};
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
disable-wp;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
status = "okay";
};
&i2c0 {
status = "okay";
accelerometer@18 {
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
rk808: pmic@1c {
compatible = "rockchip,rk818";
reg = <0x1c>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_io>;
vcc9-supply = <&vcc_io>;
regulators {
vdd_cpu: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_arm";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_cif: LDO_REG1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_cif";
};
vcc_jetta33: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_jetta33";
};
vdd_10: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
lvds_12: LDO_REG4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "lvds_12";
};
lvds_25: LDO_REG5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "lvds_25";
};
cif_18: LDO_REG6 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "cif_18";
};
vcc_sd: LDO_REG7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_sd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
wl_18: LDO_REG8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "wl_18";
};
lcd_33: SWITCH_REG1 {
regulator-name = "lcd_33";
};
};
};
};
&i2c2 {
gsl1680: touchscreen@40 {
compatible = "silead,gsl1680";
reg = <0x40>;
interrupt-parent = <&gpio1>;
interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
silead,max-fingers = <5>;
};
};
&mmc0 {
num-slots = <1>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd>;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
};
&pinctrl {
pcfg_output_low: pcfg-output-low {
output-low;
};
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
};
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm1 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&pwm3 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_host {
status = "okay";
};
&usb_otg {
status = "okay";
};
&wdt {
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink