linux_dsm_epyc7002/arch/x86/pci/legacy.c
Yinghai Lu 871d5f8dd0 x86: get mp_bus_to_node early
Currently, on an amd k8 system with multi ht chains, the numa_node of
pci devices under /sys/devices/pci0000:80/* is always 0, even if that
chain is on node 1 or 2 or 3.

Workaround: pcibus_to_node(bus) is used when we want to get the node that
pci_device is on.

In struct device, we already have numa_node member, and we could use
dev_to_node()/set_dev_node() to get and set numa_node in the device.
set_dev_node is called in pci_device_add() with pcibus_to_node(bus),
and pcibus_to_node uses bus->sysdata for nodeid.

The problem is when pci_add_device is called, bus->sysdata is not assigned
correct nodeid yet. The result is that numa_node will always be 0.

pcibios_scan_root and pci_scan_root could take sysdata. So we need to get
mp_bus_to_node mapping before these two are called, and thus
get_mp_bus_to_node could get correct node for sysdata in root bus.

In scanning of the root bus, all child busses will take parent bus sysdata.
So all pci_device->dev.numa_node will be assigned correctly and automatically.

Later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we
could also could make other bus specific device get the correct numa_node
too.

This is an updated version of pci_sysdata and Jeff's pci_domain patch.

[ mingo@elte.hu: build fix ]

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26 23:41:04 +02:00

59 lines
1.3 KiB
C

/*
* legacy.c - traditional, old school PCI bus probing
*/
#include <linux/init.h>
#include <linux/pci.h>
#include "pci.h"
/*
* Discover remaining PCI buses in case there are peer host bridges.
* We use the number of last PCI bus provided by the PCI BIOS.
*/
static void __devinit pcibios_fixup_peer_bridges(void)
{
int n, devfn;
long node;
if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
return;
DBG("PCI: Peer bridge fixup\n");
for (n=0; n <= pcibios_last_bus; n++) {
u32 l;
if (pci_find_bus(0, n))
continue;
node = get_mp_bus_to_node(n);
for (devfn = 0; devfn < 256; devfn += 8) {
if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
l != 0x0000 && l != 0xffff) {
DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
pci_scan_bus_on_node(n, &pci_root_ops, node);
break;
}
}
}
}
static int __init pci_legacy_init(void)
{
if (!raw_pci_ops) {
printk("PCI: System does not support PCI\n");
return 0;
}
if (pcibios_scanned++)
return 0;
printk("PCI: Probing PCI hardware\n");
pci_root_bus = pcibios_scan_root(0);
if (pci_root_bus)
pci_bus_add_devices(pci_root_bus);
pcibios_fixup_peer_bridges();
return 0;
}
subsys_initcall(pci_legacy_init);