mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 05:45:09 +07:00
64cf9d07ef
This patch fixes the following BUG: > kernel BUG at mm/vmalloc.c:1132! > PC is at vm_area_add_early+0x20/0x84 > LR is at add_static_vm_early+0xc/0x60 > > The problem is cns3xxx_pcie_init() (device_initcall) calls the "early" > iotable_init(). Instead of merely calling the PCIe iotable_init() from machine_desc->map_io(), this patch adds the required mappings to the main CNS3xxx mapping table. This means we don't convert .pfn back to virtual addresses in pcie.c. The size of the address space consumed for PCIe control is reduced from 96 MiB (6 * 16 MiB) to about 32 MiB (this doesn't include MMIO address space required by PCI devices): - Size of the PCIe "host" mapping is reduced from 16 MiB to 4 KiB. It's a PCI configuration address space for the local (on-chip) PCIe bridge. - Size of the "CFG0" mapping is reduced from 16 MiB to 64 KiB. It's for Type 0 Configuration accesses, i.e., accesses to the single device (with possible "functions") on the other end of the PCIe link. We really only need a 4 KiB page at 0x8000 (see the offset calculation in cns3xxx_pci_cfg_base()). There is still a potential problem with PCI bus numbers > 0xF, are they supported? - The code in cns3xxx_pci_cfg_base() and cns3xxx_pcie_hw_init() should be clearer now. - The maximum address space allocated for PCI MMIO is now correctly shown in /proc/iomem as 176 MiB (per each of the two PCI "domains" - previously only 16 MiB were reserved). This patch has been tested on Gateworks Laguna board, masqueraded as CNS3420VB. Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
344 lines
9.1 KiB
C
344 lines
9.1 KiB
C
/*
|
|
* PCI-E support for CNS3xxx
|
|
*
|
|
* Copyright 2008 Cavium Networks
|
|
* Richard Liu <richard.liu@caviumnetworks.com>
|
|
* Copyright 2010 MontaVista Software, LLC.
|
|
* Anton Vorontsov <avorontsov@mvista.com>
|
|
*
|
|
* This file is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, Version 2, as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ptrace.h>
|
|
#include <asm/mach/map.h>
|
|
#include "cns3xxx.h"
|
|
#include "core.h"
|
|
|
|
struct cns3xxx_pcie {
|
|
void __iomem *host_regs; /* PCI config registers for host bridge */
|
|
void __iomem *cfg0_regs; /* PCI Type 0 config registers */
|
|
void __iomem *cfg1_regs; /* PCI Type 1 config registers */
|
|
unsigned int irqs[2];
|
|
struct resource res_io;
|
|
struct resource res_mem;
|
|
struct hw_pci hw_pci;
|
|
|
|
bool linked;
|
|
};
|
|
|
|
static struct cns3xxx_pcie cns3xxx_pcie[]; /* forward decl. */
|
|
|
|
static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
|
|
{
|
|
struct pci_sys_data *root = sysdata;
|
|
|
|
return &cns3xxx_pcie[root->domain];
|
|
}
|
|
|
|
static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
|
|
{
|
|
return sysdata_to_cnspci(dev->sysdata);
|
|
}
|
|
|
|
static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
|
|
{
|
|
return sysdata_to_cnspci(bus->sysdata);
|
|
}
|
|
|
|
static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
|
|
unsigned int devfn, int where)
|
|
{
|
|
struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
|
|
int busno = bus->number;
|
|
int slot = PCI_SLOT(devfn);
|
|
int offset;
|
|
void __iomem *base;
|
|
|
|
/* If there is no link, just show the CNS PCI bridge. */
|
|
if (!cnspci->linked && (busno > 0 || slot > 0))
|
|
return NULL;
|
|
|
|
/*
|
|
* The CNS PCI bridge doesn't fit into the PCI hierarchy, though
|
|
* we still want to access it. For this to work, we must place
|
|
* the first device on the same bus as the CNS PCI bridge.
|
|
*/
|
|
if (busno == 0) { /* directly connected PCIe bus */
|
|
switch (slot) {
|
|
case 0: /* host bridge device, function 0 only */
|
|
base = cnspci->host_regs;
|
|
break;
|
|
case 1: /* directly connected device */
|
|
base = cnspci->cfg0_regs;
|
|
break;
|
|
default:
|
|
return NULL; /* no such device */
|
|
}
|
|
} else /* remote PCI bus */
|
|
base = cnspci->cfg1_regs;
|
|
|
|
offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc);
|
|
return base + offset;
|
|
}
|
|
|
|
static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
u32 v;
|
|
void __iomem *base;
|
|
u32 mask = (0x1ull << (size * 8)) - 1;
|
|
int shift = (where % 4) * 8;
|
|
|
|
base = cns3xxx_pci_cfg_base(bus, devfn, where);
|
|
if (!base) {
|
|
*val = 0xffffffff;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
v = __raw_readl(base);
|
|
|
|
if (bus->number == 0 && devfn == 0 &&
|
|
(where & 0xffc) == PCI_CLASS_REVISION) {
|
|
/*
|
|
* RC's class is 0xb, but Linux PCI driver needs 0x604
|
|
* for a PCIe bridge. So we must fixup the class code
|
|
* to 0x604 here.
|
|
*/
|
|
v &= 0xff;
|
|
v |= 0x604 << 16;
|
|
}
|
|
|
|
*val = (v >> shift) & mask;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
u32 v;
|
|
void __iomem *base;
|
|
u32 mask = (0x1ull << (size * 8)) - 1;
|
|
int shift = (where % 4) * 8;
|
|
|
|
base = cns3xxx_pci_cfg_base(bus, devfn, where);
|
|
if (!base)
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
v = __raw_readl(base);
|
|
|
|
v &= ~(mask << shift);
|
|
v |= (val & mask) << shift;
|
|
|
|
__raw_writel(v, base);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
|
|
{
|
|
struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
|
|
struct resource *res_io = &cnspci->res_io;
|
|
struct resource *res_mem = &cnspci->res_mem;
|
|
|
|
BUG_ON(request_resource(&iomem_resource, res_io) ||
|
|
request_resource(&iomem_resource, res_mem));
|
|
|
|
pci_add_resource_offset(&sys->resources, res_io, sys->io_offset);
|
|
pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static struct pci_ops cns3xxx_pcie_ops = {
|
|
.read = cns3xxx_pci_read_config,
|
|
.write = cns3xxx_pci_write_config,
|
|
};
|
|
|
|
static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
|
|
int irq = cnspci->irqs[slot];
|
|
|
|
pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
|
|
pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
|
|
PCI_FUNC(dev->devfn), slot, pin, irq);
|
|
|
|
return irq;
|
|
}
|
|
|
|
static struct cns3xxx_pcie cns3xxx_pcie[] = {
|
|
[0] = {
|
|
.host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT,
|
|
.cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT,
|
|
.cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT,
|
|
.res_io = {
|
|
.name = "PCIe0 I/O space",
|
|
.start = CNS3XXX_PCIE0_IO_BASE,
|
|
.end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */
|
|
.flags = IORESOURCE_IO,
|
|
},
|
|
.res_mem = {
|
|
.name = "PCIe0 non-prefetchable",
|
|
.start = CNS3XXX_PCIE0_MEM_BASE,
|
|
.end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
|
|
.hw_pci = {
|
|
.domain = 0,
|
|
.nr_controllers = 1,
|
|
.ops = &cns3xxx_pcie_ops,
|
|
.setup = cns3xxx_pci_setup,
|
|
.map_irq = cns3xxx_pcie_map_irq,
|
|
},
|
|
},
|
|
[1] = {
|
|
.host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT,
|
|
.cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT,
|
|
.cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT,
|
|
.res_io = {
|
|
.name = "PCIe1 I/O space",
|
|
.start = CNS3XXX_PCIE1_IO_BASE,
|
|
.end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */
|
|
.flags = IORESOURCE_IO,
|
|
},
|
|
.res_mem = {
|
|
.name = "PCIe1 non-prefetchable",
|
|
.start = CNS3XXX_PCIE1_MEM_BASE,
|
|
.end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
|
|
.hw_pci = {
|
|
.domain = 1,
|
|
.nr_controllers = 1,
|
|
.ops = &cns3xxx_pcie_ops,
|
|
.setup = cns3xxx_pci_setup,
|
|
.map_irq = cns3xxx_pcie_map_irq,
|
|
},
|
|
},
|
|
};
|
|
|
|
static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
|
|
{
|
|
int port = cnspci->hw_pci.domain;
|
|
u32 reg;
|
|
unsigned long time;
|
|
|
|
reg = __raw_readl(MISC_PCIE_CTRL(port));
|
|
/*
|
|
* Enable Application Request to 1, it will exit L1 automatically,
|
|
* but when chip back, it will use another clock, still can use 0x1.
|
|
*/
|
|
reg |= 0x3;
|
|
__raw_writel(reg, MISC_PCIE_CTRL(port));
|
|
|
|
pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
|
|
pr_info("PCIe: Port[%d] Check data link layer...", port);
|
|
|
|
time = jiffies;
|
|
while (1) {
|
|
reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
|
|
if (reg & 0x1) {
|
|
pr_info("Link up.\n");
|
|
cnspci->linked = 1;
|
|
break;
|
|
} else if (time_after(jiffies, time + 50)) {
|
|
pr_info("Device not found.\n");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
|
|
{
|
|
int port = cnspci->hw_pci.domain;
|
|
struct pci_sys_data sd = {
|
|
.domain = port,
|
|
};
|
|
struct pci_bus bus = {
|
|
.number = 0,
|
|
.ops = &cns3xxx_pcie_ops,
|
|
.sysdata = &sd,
|
|
};
|
|
u16 mem_base = cnspci->res_mem.start >> 16;
|
|
u16 mem_limit = cnspci->res_mem.end >> 16;
|
|
u16 io_base = cnspci->res_io.start >> 16;
|
|
u16 io_limit = cnspci->res_io.end >> 16;
|
|
u32 devfn = 0;
|
|
u8 tmp8;
|
|
u16 pos;
|
|
u16 dc;
|
|
|
|
pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
|
|
pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
|
|
pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
|
|
|
|
pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
|
|
pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
|
|
pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
|
|
|
|
pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
|
|
pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit);
|
|
pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
|
|
pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit);
|
|
|
|
if (!cnspci->linked)
|
|
return;
|
|
|
|
/* Set Device Max_Read_Request_Size to 128 byte */
|
|
devfn = PCI_DEVFN(1, 0);
|
|
pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
|
|
pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
|
|
dc &= ~(0x3 << 12); /* Clear Device Control Register [14:12] */
|
|
pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
|
|
pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
|
|
if (!(dc & (0x3 << 12)))
|
|
pr_info("PCIe: Set Device Max_Read_Request_Size to 128 byte\n");
|
|
|
|
/* Disable PCIe0 Interrupt Mask INTA to INTD */
|
|
__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
|
|
}
|
|
|
|
static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
|
|
struct pt_regs *regs)
|
|
{
|
|
if (fsr & (1 << 10))
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
static int __init cns3xxx_pcie_init(void)
|
|
{
|
|
int i;
|
|
|
|
pcibios_min_io = 0;
|
|
pcibios_min_mem = 0;
|
|
|
|
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
|
|
"imprecise external abort");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
|
|
cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
|
|
cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
|
|
cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
|
|
cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
|
|
pci_common_init(&cns3xxx_pcie[i].hw_pci);
|
|
}
|
|
|
|
pci_assign_unassigned_resources();
|
|
|
|
return 0;
|
|
}
|
|
device_initcall(cns3xxx_pcie_init);
|