AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-26 18:20:53 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
a81ac3b046
linux_dsm_epyc7002/drivers/scsi/lpfc/lpfc_sli.h
James Smart 0cf07f84dd scsi: lpfc: Add auto EQ delay logic 
Administrator intervention is currently required to get good numbers
when switching from running latency tests to IOPS tests.

The configured interrupt coalescing values will greatly effect the
results of these tests.  Currently, the driver has a single coalescing
value set by values of the module attribute.  This patch changes the
driver to support auto-configuration of the coalescing value based on
the total number of outstanding IOs and average number of CQEs processed
per interrupt for an EQ.  Values are checked every 5 seconds.

The driver defaults to the automatic selection. Automatic selection can
be disabled by the new lpfc_auto_imax module_parameter.

Older hardware can only change interrupt coalescing by mailbox
command. Newer hardware supports change via a register. The patch
support both.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 21:37:31 -04:00

354 lines
14 KiB
C
Raw Blame History

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.broadcom.com *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
/* forward declaration for LPFC_IOCB_t's use */
struct lpfc_hba;
struct lpfc_vport;
/* Define the context types that SLI handles for abort and sums. */
typedef enum _lpfc_ctx_cmd {
LPFC_CTX_LUN,
LPFC_CTX_TGT,
LPFC_CTX_HOST
} lpfc_ctx_cmd;
struct lpfc_cq_event {
struct list_head list;
union {
struct lpfc_mcqe mcqe_cmpl;
struct lpfc_acqe_link acqe_link;
struct lpfc_acqe_fip acqe_fip;
struct lpfc_acqe_dcbx acqe_dcbx;
struct lpfc_acqe_grp5 acqe_grp5;
struct lpfc_acqe_fc_la acqe_fc;
struct lpfc_acqe_sli acqe_sli;
struct lpfc_rcqe rcqe_cmpl;
struct sli4_wcqe_xri_aborted wcqe_axri;
struct lpfc_wcqe_complete wcqe_cmpl;
} cqe;
};
/* This structure is used to handle IOCB requests / responses */
struct lpfc_iocbq {
/* lpfc_iocbqs are used in double linked lists */
struct list_head list;
struct list_head clist;
struct list_head dlist;
uint16_t iotag; /* pre-assigned IO tag */
uint16_t sli4_lxritag; /* logical pre-assigned XRI. */
uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
uint16_t hba_wqidx; /* index to HBA work queue */
struct lpfc_cq_event cq_event;
struct lpfc_wcqe_complete wcqe_cmpl; /* WQE cmpl */
uint64_t isr_timestamp;
/* Be careful here */
union lpfc_wqe wqe; /* WQE cmd */
IOCB_t iocb; /* For IOCB cmd or if we want 128 byte WQE */
uint8_t rsvd2;
uint8_t priority; /* OAS priority */
uint8_t retry; /* retry counter for IOCB cmd - if needed */
uint32_t iocb_flag;
#define LPFC_IO_LIBDFC 1 /* libdfc iocb */
#define LPFC_IO_WAKE 2 /* Synchronous I/O completed */
#define LPFC_IO_WAKE_TMO LPFC_IO_WAKE /* Synchronous I/O timed out */
#define LPFC_IO_FCP 4 /* FCP command -- iocbq in scsi_buf */
#define LPFC_DRIVER_ABORTED 8 /* driver aborted this request */
#define LPFC_IO_FABRIC 0x10 /* Iocb send using fabric scheduler */
#define LPFC_DELAY_MEM_FREE 0x20 /* Defer free'ing of FC data */
#define LPFC_EXCHANGE_BUSY 0x40 /* SLI4 hba reported XB in response */
#define LPFC_USE_FCPWQIDX 0x80 /* Submit to specified FCPWQ index */
#define DSS_SECURITY_OP 0x100 /* security IO */
#define LPFC_IO_ON_TXCMPLQ 0x200 /* The IO is still on the TXCMPLQ */
#define LPFC_IO_DIF_PASS 0x400 /* T10 DIF IO pass-thru prot */
#define LPFC_IO_DIF_STRIP 0x800 /* T10 DIF IO strip prot */
#define LPFC_IO_DIF_INSERT 0x1000 /* T10 DIF IO insert prot */
#define LPFC_IO_CMD_OUTSTANDING 0x2000 /* timeout handler abort window */
#define LPFC_FIP_ELS_ID_MASK 0xc000 /* ELS_ID range 0-3, non-shifted mask */
#define LPFC_FIP_ELS_ID_SHIFT 14
#define LPFC_IO_OAS 0x10000 /* OAS FCP IO */
#define LPFC_IO_FOF 0x20000 /* FOF FCP IO */
#define LPFC_IO_LOOPBACK 0x40000 /* Loopback IO */
#define LPFC_PRLI_NVME_REQ 0x80000 /* This is an NVME PRLI. */
#define LPFC_PRLI_FCP_REQ 0x100000 /* This is an NVME PRLI. */
#define LPFC_IO_NVME 0x200000 /* NVME FCP command */
#define LPFC_IO_NVME_LS 0x400000 /* NVME LS command */
#define LPFC_IO_NVMET 0x800000 /* NVMET command */
uint32_t drvrTimeout; /* driver timeout in seconds */
struct lpfc_vport *vport;/* virtual port pointer */
void *context1; /* caller context information */
void *context2; /* caller context information */
void *context3; /* caller context information */
union {
wait_queue_head_t *wait_queue;
struct lpfc_iocbq *rsp_iocb;
struct lpfcMboxq *mbox;
struct lpfc_nodelist *ndlp;
struct lpfc_node_rrq *rrq;
} context_un;
void (*fabric_iocb_cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
void (*wait_iocb_cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
void (*iocb_cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
void (*wqe_cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_wcqe_complete *);
};
#define SLI_IOCB_RET_IOCB 1 /* Return IOCB if cmd ring full */
#define IOCB_SUCCESS 0
#define IOCB_BUSY 1
#define IOCB_ERROR 2
#define IOCB_TIMEDOUT 3
#define SLI_WQE_RET_WQE 1 /* Return WQE if cmd ring full */
#define WQE_SUCCESS 0
#define WQE_BUSY 1
#define WQE_ERROR 2
#define WQE_TIMEDOUT 3
#define WQE_ABORTED 4
#define LPFC_MBX_WAKE 1
#define LPFC_MBX_IMED_UNREG 2
typedef struct lpfcMboxq {
/* MBOXQs are used in single linked lists */
struct list_head list; /* ptr to next mailbox command */
union {
MAILBOX_t mb; /* Mailbox cmd */
struct lpfc_mqe mqe;
} u;
struct lpfc_vport *vport;/* virtual port pointer */
void *context1; /* caller context information */
void *context2; /* caller context information */
void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
uint8_t mbox_flag;
uint16_t in_ext_byte_len;
uint16_t out_ext_byte_len;
uint8_t mbox_offset_word;
struct lpfc_mcqe mcqe;
struct lpfc_mbx_nembed_sge_virt *sge_array;
} LPFC_MBOXQ_t;
#define MBX_POLL 1 /* poll mailbox till command done, then
return */
#define MBX_NOWAIT 2 /* issue command then return immediately */
#define LPFC_MAX_RING_MASK 5 /* max num of rctl/type masks allowed per
ring */
#define LPFC_SLI3_MAX_RING 4 /* Max num of SLI3 rings used by driver.
For SLI4, an additional ring for each
FCP WQ will be allocated. */
struct lpfc_sli_ring;
struct lpfc_sli_ring_mask {
uint8_t profile; /* profile associated with ring */
uint8_t rctl; /* rctl / type pair configured for ring */
uint8_t type; /* rctl / type pair configured for ring */
uint8_t rsvd;
/* rcv'd unsol event */
void (*lpfc_sli_rcv_unsol_event) (struct lpfc_hba *,
struct lpfc_sli_ring *,
struct lpfc_iocbq *);
};
/* Structure used to hold SLI statistical counters and info */
struct lpfc_sli_ring_stat {
uint64_t iocb_event; /* IOCB event counters */
uint64_t iocb_cmd; /* IOCB cmd issued */
uint64_t iocb_rsp; /* IOCB rsp received */
uint64_t iocb_cmd_delay; /* IOCB cmd ring delay */
uint64_t iocb_cmd_full; /* IOCB cmd ring full */
uint64_t iocb_cmd_empty; /* IOCB cmd ring is now empty */
uint64_t iocb_rsp_full; /* IOCB rsp ring full */
};
struct lpfc_sli3_ring {
uint32_t local_getidx; /* last available cmd index (from cmdGetInx) */
uint32_t next_cmdidx; /* next_cmd index */
uint32_t rspidx; /* current index in response ring */
uint32_t cmdidx; /* current index in command ring */
uint16_t numCiocb; /* number of command iocb's per ring */
uint16_t numRiocb; /* number of rsp iocb's per ring */
uint16_t sizeCiocb; /* Size of command iocb's in this ring */
uint16_t sizeRiocb; /* Size of response iocb's in this ring */
uint32_t *cmdringaddr; /* virtual address for cmd rings */
uint32_t *rspringaddr; /* virtual address for rsp rings */
};
struct lpfc_sli4_ring {
struct lpfc_queue *wqp; /* Pointer to associated WQ */
};
/* Structure used to hold SLI ring information */
struct lpfc_sli_ring {
uint16_t flag; /* ring flags */
#define LPFC_DEFERRED_RING_EVENT 0x001 /* Deferred processing a ring event */
#define LPFC_CALL_RING_AVAILABLE 0x002 /* indicates cmd was full */
#define LPFC_STOP_IOCB_EVENT 0x020 /* Stop processing IOCB cmds event */
uint16_t abtsiotag; /* tracks next iotag to use for ABTS */
uint8_t rsvd;
uint8_t ringno; /* ring number */
spinlock_t ring_lock; /* lock for issuing commands */
uint32_t fast_iotag; /* max fastlookup based iotag */
uint32_t iotag_ctr; /* keeps track of the next iotag to use */
uint32_t iotag_max; /* max iotag value to use */
struct list_head txq;
uint16_t txq_cnt; /* current length of queue */
uint16_t txq_max; /* max length */
struct list_head txcmplq;
uint16_t txcmplq_cnt; /* current length of queue */
uint16_t txcmplq_max; /* max length */
uint32_t missbufcnt; /* keep track of buffers to post */
struct list_head postbufq;
uint16_t postbufq_cnt; /* current length of queue */
uint16_t postbufq_max; /* max length */
struct list_head iocb_continueq;
uint16_t iocb_continueq_cnt; /* current length of queue */
uint16_t iocb_continueq_max; /* max length */
struct list_head iocb_continue_saveq;
struct lpfc_sli_ring_mask prt[LPFC_MAX_RING_MASK];
uint32_t num_mask; /* number of mask entries in prt array */
void (*lpfc_sli_rcv_async_status) (struct lpfc_hba *,
struct lpfc_sli_ring *, struct lpfc_iocbq *);
struct lpfc_sli_ring_stat stats; /* SLI statistical info */
/* cmd ring available */
void (*lpfc_sli_cmd_available) (struct lpfc_hba *,
struct lpfc_sli_ring *);
union {
struct lpfc_sli3_ring sli3;
struct lpfc_sli4_ring sli4;
} sli;
};
/* Structure used for configuring rings to a specific profile or rctl / type */
struct lpfc_hbq_init {
uint32_t rn; /* Receive buffer notification */
uint32_t entry_count; /* max # of entries in HBQ */
uint32_t headerLen; /* 0 if not profile 4 or 5 */
uint32_t logEntry; /* Set to 1 if this HBQ used for LogEntry */
uint32_t profile; /* Selection profile 0=all, 7=logentry */
uint32_t ring_mask; /* Binds HBQ to a ring e.g. Ring0=b0001,
* ring2=b0100 */
uint32_t hbq_index; /* index of this hbq in ring .HBQs[] */
uint32_t seqlenoff;
uint32_t maxlen;
uint32_t seqlenbcnt;
uint32_t cmdcodeoff;
uint32_t cmdmatch[8];
uint32_t mask_count; /* number of mask entries in prt array */
struct hbq_mask hbqMasks[6];
/* Non-config rings fields to keep track of buffer allocations */
uint32_t buffer_count; /* number of buffers allocated */
uint32_t init_count; /* number to allocate when initialized */
uint32_t add_count; /* number to allocate when starved */
} ;
/* Structure used to hold SLI statistical counters and info */
struct lpfc_sli_stat {
uint64_t mbox_stat_err; /* Mbox cmds completed status error */
uint64_t mbox_cmd; /* Mailbox commands issued */
uint64_t sli_intr; /* Count of Host Attention interrupts */
uint64_t sli_prev_intr; /* Previous cnt of Host Attention interrupts */
uint64_t sli_ips; /* Host Attention interrupts per sec */
uint32_t err_attn_event; /* Error Attn event counters */
uint32_t link_event; /* Link event counters */
uint32_t mbox_event; /* Mailbox event counters */
uint32_t mbox_busy; /* Mailbox cmd busy */
};
/* Structure to store link status values when port stats are reset */
struct lpfc_lnk_stat {
uint32_t link_failure_count;
uint32_t loss_of_sync_count;
uint32_t loss_of_signal_count;
uint32_t prim_seq_protocol_err_count;
uint32_t invalid_tx_word_count;
uint32_t invalid_crc_count;
uint32_t error_frames;
uint32_t link_events;
};
/* Structure used to hold SLI information */
struct lpfc_sli {
uint32_t num_rings;
uint32_t sli_flag;
/* Additional sli_flags */
#define LPFC_SLI_MBOX_ACTIVE 0x100 /* HBA mailbox is currently active */
#define LPFC_SLI_ACTIVE 0x200 /* SLI in firmware is active */
#define LPFC_PROCESS_LA 0x400 /* Able to process link attention */
#define LPFC_BLOCK_MGMT_IO 0x800 /* Don't allow mgmt mbx or iocb cmds */
#define LPFC_MENLO_MAINT 0x1000 /* need for menl fw download */
#define LPFC_SLI_ASYNC_MBX_BLK 0x2000 /* Async mailbox is blocked */
#define LPFC_SLI_SUPPRESS_RSP 0x4000 /* Suppress RSP feature is supported */
#define LPFC_SLI_USE_EQDR 0x8000 /* EQ Delay Register is supported */
struct lpfc_sli_ring *sli3_ring;
struct lpfc_sli_stat slistat; /* SLI statistical info */
struct list_head mboxq;
uint16_t mboxq_cnt; /* current length of queue */
uint16_t mboxq_max; /* max length */
LPFC_MBOXQ_t *mbox_active; /* active mboxq information */
struct list_head mboxq_cmpl;
struct timer_list mbox_tmo; /* Hold clk to timeout active mbox
cmd */
#define LPFC_IOCBQ_LOOKUP_INCREMENT 1024
struct lpfc_iocbq ** iocbq_lookup; /* array to lookup IOCB by IOTAG */
size_t iocbq_lookup_len; /* current lengs of the array */
uint16_t last_iotag; /* last allocated IOTAG */
unsigned long stats_start; /* in seconds */
struct lpfc_lnk_stat lnk_stat_offsets;
};
/* Timeout for normal outstanding mbox command (Seconds) */
#define LPFC_MBOX_TMO 30
/* Timeout for non-flash-based outstanding sli_config mbox command (Seconds) */
#define LPFC_MBOX_SLI4_CONFIG_TMO 60
/* Timeout for flash-based outstanding sli_config mbox command (Seconds) */
#define LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO 300
/* Timeout for other flash-based outstanding mbox command (Seconds) */
#define LPFC_MBOX_TMO_FLASH_CMD 300
Reference in New Issue View Git Blame Copy Permalink