mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 12:29:44 +07:00
b630a23a73
kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: - Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. - Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaDV9TAAoJEEEQszewGV1zf0AQAIlHxM8B0mJPOFv7WdPIHs8j GSGAPv0rPobdgZI8vegosIQmAiry5jjaHP6VGOrK5n8FRxfBLd89NLT7dgK7J9Yx tYcQRQn1/MqZKaIjWWgTes3okEr9s77Of3aWkA9gyvBjTGoo2hu8BTwZOYuPrIPP aYcI7VR0VbTe7FQR1QRtKBXnBTXfznF1j5ckKNY4ahgIPcUgxyh6EA1E61rDorLK gvwwzoBqIKQAcnapgarF7YOJjoE0i7ZoSlhL0b0nvhcgolyK/zLN4xujLcTGPeTJ hQwe7LhxtvtmJmu0jRMuetDLFT52d6eq8ttyFBMULkgRzcgMv6GZZXUy4k92t7ZT F2DRbAjyAlxkhUhQ8BORzEXwfWYITt1M49jWQqugdDR2fV/MAlF8motOkVBl73iS zHIQ/ZDcAD+PlwTHiDyDOUxj7qyDs2MkTLTzfXc0koOQZOqskDHQ1dIf3UzLzZ9S /dx339/ejwP73E0lzOsanhianfonqWZ3Apn3aRG18uqCt2+eHySWpxyRANuOlBZI czERg+47wDfng24xyuH0EElgbS5G0Bt1lT5zLVLdFEvoLmcBHVKqaCkiuvYXOjVM GyMRvQPiJbhT6qiJ+aSP8t/utl1aUhXQLtrUnXxu8qv9tQ6jgmqiQd9855Uvrzb0 ZR2wyNc2jtWzwCfrkWjt =kj/b -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
949 lines
24 KiB
C
949 lines
24 KiB
C
/*
|
|
* GPIO driver for AMD
|
|
*
|
|
* Copyright (c) 2014,2015 AMD Corporation.
|
|
* Authors: Ken Xue <Ken.Xue@amd.com>
|
|
* Wu, Jeff <Jeff.Wu@amd.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* Contact Information: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
|
|
* Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
#include "core.h"
|
|
#include "pinctrl-utils.h"
|
|
#include "pinctrl-amd.h"
|
|
|
|
static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
unsigned long flags;
|
|
u32 pin_reg;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
pin_reg &= ~BIT(OUTPUT_ENABLE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
|
|
int value)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
pin_reg |= BIT(OUTPUT_ENABLE_OFF);
|
|
if (value)
|
|
pin_reg |= BIT(OUTPUT_VALUE_OFF);
|
|
else
|
|
pin_reg &= ~BIT(OUTPUT_VALUE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_gpio_get_value(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return !!(pin_reg & BIT(PIN_STS_OFF));
|
|
}
|
|
|
|
static void amd_gpio_set_value(struct gpio_chip *gc, unsigned offset, int value)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
if (value)
|
|
pin_reg |= BIT(OUTPUT_VALUE_OFF);
|
|
else
|
|
pin_reg &= ~BIT(OUTPUT_VALUE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
|
|
unsigned debounce)
|
|
{
|
|
u32 time;
|
|
u32 pin_reg;
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
|
|
if (debounce) {
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
/*
|
|
Debounce Debounce Timer Max
|
|
TmrLarge TmrOutUnit Unit Debounce
|
|
Time
|
|
0 0 61 usec (2 RtcClk) 976 usec
|
|
0 1 244 usec (8 RtcClk) 3.9 msec
|
|
1 0 15.6 msec (512 RtcClk) 250 msec
|
|
1 1 62.5 msec (2048 RtcClk) 1 sec
|
|
*/
|
|
|
|
if (debounce < 61) {
|
|
pin_reg |= 1;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 976) {
|
|
time = debounce / 61;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 3900) {
|
|
time = debounce / 244;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 250000) {
|
|
time = debounce / 15600;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg |= BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 1000000) {
|
|
time = debounce / 62500;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg |= BIT(DB_TMR_LARGE_OFF);
|
|
} else {
|
|
pin_reg &= ~DB_CNTRl_MASK;
|
|
ret = -EINVAL;
|
|
}
|
|
} else {
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
pin_reg &= ~DB_CNTRl_MASK;
|
|
}
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_gpio_set_config(struct gpio_chip *gc, unsigned offset,
|
|
unsigned long config)
|
|
{
|
|
u32 debounce;
|
|
|
|
if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
|
|
return -ENOTSUPP;
|
|
|
|
debounce = pinconf_to_config_argument(config);
|
|
return amd_gpio_set_debounce(gc, offset, debounce);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
unsigned int bank, i, pin_num;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
char *level_trig;
|
|
char *active_level;
|
|
char *interrupt_enable;
|
|
char *interrupt_mask;
|
|
char *wake_cntrl0;
|
|
char *wake_cntrl1;
|
|
char *wake_cntrl2;
|
|
char *pin_sts;
|
|
char *pull_up_sel;
|
|
char *pull_up_enable;
|
|
char *pull_down_enable;
|
|
char *output_value;
|
|
char *output_enable;
|
|
|
|
for (bank = 0; bank < gpio_dev->hwbank_num; bank++) {
|
|
seq_printf(s, "GPIO bank%d\t", bank);
|
|
|
|
switch (bank) {
|
|
case 0:
|
|
i = 0;
|
|
pin_num = AMD_GPIO_PINS_BANK0;
|
|
break;
|
|
case 1:
|
|
i = 64;
|
|
pin_num = AMD_GPIO_PINS_BANK1 + i;
|
|
break;
|
|
case 2:
|
|
i = 128;
|
|
pin_num = AMD_GPIO_PINS_BANK2 + i;
|
|
break;
|
|
case 3:
|
|
i = 192;
|
|
pin_num = AMD_GPIO_PINS_BANK3 + i;
|
|
break;
|
|
default:
|
|
/* Illegal bank number, ignore */
|
|
continue;
|
|
}
|
|
for (; i < pin_num; i++) {
|
|
seq_printf(s, "pin%d\t", i);
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + i * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
if (pin_reg & BIT(INTERRUPT_ENABLE_OFF)) {
|
|
interrupt_enable = "interrupt is enabled|";
|
|
|
|
if (!(pin_reg & BIT(ACTIVE_LEVEL_OFF)) &&
|
|
!(pin_reg & BIT(ACTIVE_LEVEL_OFF + 1)))
|
|
active_level = "Active low|";
|
|
else if (pin_reg & BIT(ACTIVE_LEVEL_OFF) &&
|
|
!(pin_reg & BIT(ACTIVE_LEVEL_OFF + 1)))
|
|
active_level = "Active high|";
|
|
else if (!(pin_reg & BIT(ACTIVE_LEVEL_OFF)) &&
|
|
pin_reg & BIT(ACTIVE_LEVEL_OFF + 1))
|
|
active_level = "Active on both|";
|
|
else
|
|
active_level = "Unknown Active level|";
|
|
|
|
if (pin_reg & BIT(LEVEL_TRIG_OFF))
|
|
level_trig = "Level trigger|";
|
|
else
|
|
level_trig = "Edge trigger|";
|
|
|
|
} else {
|
|
interrupt_enable =
|
|
"interrupt is disabled|";
|
|
active_level = " ";
|
|
level_trig = " ";
|
|
}
|
|
|
|
if (pin_reg & BIT(INTERRUPT_MASK_OFF))
|
|
interrupt_mask =
|
|
"interrupt is unmasked|";
|
|
else
|
|
interrupt_mask =
|
|
"interrupt is masked|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S0I3))
|
|
wake_cntrl0 = "enable wakeup in S0i3 state|";
|
|
else
|
|
wake_cntrl0 = "disable wakeup in S0i3 state|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S3))
|
|
wake_cntrl1 = "enable wakeup in S3 state|";
|
|
else
|
|
wake_cntrl1 = "disable wakeup in S3 state|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S4))
|
|
wake_cntrl2 = "enable wakeup in S4/S5 state|";
|
|
else
|
|
wake_cntrl2 = "disable wakeup in S4/S5 state|";
|
|
|
|
if (pin_reg & BIT(PULL_UP_ENABLE_OFF)) {
|
|
pull_up_enable = "pull-up is enabled|";
|
|
if (pin_reg & BIT(PULL_UP_SEL_OFF))
|
|
pull_up_sel = "8k pull-up|";
|
|
else
|
|
pull_up_sel = "4k pull-up|";
|
|
} else {
|
|
pull_up_enable = "pull-up is disabled|";
|
|
pull_up_sel = " ";
|
|
}
|
|
|
|
if (pin_reg & BIT(PULL_DOWN_ENABLE_OFF))
|
|
pull_down_enable = "pull-down is enabled|";
|
|
else
|
|
pull_down_enable = "Pull-down is disabled|";
|
|
|
|
if (pin_reg & BIT(OUTPUT_ENABLE_OFF)) {
|
|
pin_sts = " ";
|
|
output_enable = "output is enabled|";
|
|
if (pin_reg & BIT(OUTPUT_VALUE_OFF))
|
|
output_value = "output is high|";
|
|
else
|
|
output_value = "output is low|";
|
|
} else {
|
|
output_enable = "output is disabled|";
|
|
output_value = " ";
|
|
|
|
if (pin_reg & BIT(PIN_STS_OFF))
|
|
pin_sts = "input is high|";
|
|
else
|
|
pin_sts = "input is low|";
|
|
}
|
|
|
|
seq_printf(s, "%s %s %s %s %s %s\n"
|
|
" %s %s %s %s %s %s %s 0x%x\n",
|
|
level_trig, active_level, interrupt_enable,
|
|
interrupt_mask, wake_cntrl0, wake_cntrl1,
|
|
wake_cntrl2, pin_sts, pull_up_sel,
|
|
pull_up_enable, pull_down_enable,
|
|
output_value, output_enable, pin_reg);
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
#define amd_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
static void amd_gpio_irq_enable(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg |= BIT(INTERRUPT_ENABLE_OFF);
|
|
pin_reg |= BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_disable(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg &= ~BIT(INTERRUPT_ENABLE_OFF);
|
|
pin_reg &= ~BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg &= ~BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg |= BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_eoi(struct irq_data *d)
|
|
{
|
|
u32 reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
reg = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
reg |= EOI_MASK;
|
|
writel(reg, gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
int ret = 0;
|
|
u32 pin_reg;
|
|
unsigned long flags, irq_flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
|
|
/* Ignore the settings coming from the client and
|
|
* read the values from the ACPI tables
|
|
* while setting the trigger type
|
|
*/
|
|
|
|
irq_flags = irq_get_trigger_type(d->irq);
|
|
if (irq_flags != IRQ_TYPE_NONE)
|
|
type = irq_flags;
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= BOTH_EADGE << ACTIVE_LEVEL_OFF;
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
|
|
pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
|
|
pin_reg |= DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
|
|
pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
|
|
pin_reg |= DB_TYPE_PRESERVE_HIGH_GLITCH << DB_CNTRL_OFF;
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_NONE:
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev, "Invalid type value\n");
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
pin_reg |= CLR_INTR_STAT << INTERRUPT_STS_OFF;
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void amd_irq_ack(struct irq_data *d)
|
|
{
|
|
/*
|
|
* based on HW design,there is no need to ack HW
|
|
* before handle current irq. But this routine is
|
|
* necessary for handle_edge_irq
|
|
*/
|
|
}
|
|
|
|
static struct irq_chip amd_gpio_irqchip = {
|
|
.name = "amd_gpio",
|
|
.irq_ack = amd_irq_ack,
|
|
.irq_enable = amd_gpio_irq_enable,
|
|
.irq_disable = amd_gpio_irq_disable,
|
|
.irq_mask = amd_gpio_irq_mask,
|
|
.irq_unmask = amd_gpio_irq_unmask,
|
|
.irq_eoi = amd_gpio_irq_eoi,
|
|
.irq_set_type = amd_gpio_irq_set_type,
|
|
.flags = IRQCHIP_SKIP_SET_WAKE,
|
|
};
|
|
|
|
#define PIN_IRQ_PENDING (BIT(INTERRUPT_STS_OFF) | BIT(WAKE_STS_OFF))
|
|
|
|
static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct amd_gpio *gpio_dev = dev_id;
|
|
struct gpio_chip *gc = &gpio_dev->gc;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
unsigned int i, irqnr;
|
|
unsigned long flags;
|
|
u32 *regs, regval;
|
|
u64 status, mask;
|
|
|
|
/* Read the wake status */
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
status = readl(gpio_dev->base + WAKE_INT_STATUS_REG1);
|
|
status <<= 32;
|
|
status |= readl(gpio_dev->base + WAKE_INT_STATUS_REG0);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
/* Bit 0-45 contain the relevant status bits */
|
|
status &= (1ULL << 46) - 1;
|
|
regs = gpio_dev->base;
|
|
for (mask = 1, irqnr = 0; status; mask <<= 1, regs += 4, irqnr += 4) {
|
|
if (!(status & mask))
|
|
continue;
|
|
status &= ~mask;
|
|
|
|
/* Each status bit covers four pins */
|
|
for (i = 0; i < 4; i++) {
|
|
regval = readl(regs + i);
|
|
if (!(regval & PIN_IRQ_PENDING))
|
|
continue;
|
|
irq = irq_find_mapping(gc->irq.domain, irqnr + i);
|
|
generic_handle_irq(irq);
|
|
|
|
/* Clear interrupt.
|
|
* We must read the pin register again, in case the
|
|
* value was changed while executing
|
|
* generic_handle_irq() above.
|
|
*/
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
regval = readl(regs + i);
|
|
writel(regval, regs + i);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* Signal EOI to the GPIO unit */
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
regval = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
regval |= EOI_MASK;
|
|
writel(regval, gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return gpio_dev->ngroups;
|
|
}
|
|
|
|
static const char *amd_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned group)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return gpio_dev->groups[group].name;
|
|
}
|
|
|
|
static int amd_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = gpio_dev->groups[group].pins;
|
|
*num_pins = gpio_dev->groups[group].npins;
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops amd_pinctrl_ops = {
|
|
.get_groups_count = amd_get_groups_count,
|
|
.get_group_name = amd_get_group_name,
|
|
.get_group_pins = amd_get_group_pins,
|
|
#ifdef CONFIG_OF
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
#endif
|
|
};
|
|
|
|
static int amd_pinconf_get(struct pinctrl_dev *pctldev,
|
|
unsigned int pin,
|
|
unsigned long *config)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned arg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + pin*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
arg = pin_reg & DB_TMR_OUT_MASK;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
arg = (pin_reg >> PULL_DOWN_ENABLE_OFF) & BIT(0);
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
arg = (pin_reg >> PULL_UP_SEL_OFF) & (BIT(0) | BIT(1));
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
arg = (pin_reg >> DRV_STRENGTH_SEL_OFF) & DRV_STRENGTH_SEL_MASK;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
|
|
param);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
int i;
|
|
u32 arg;
|
|
int ret = 0;
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
enum pin_config_param param;
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
pin_reg = readl(gpio_dev->base + pin*4);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
pin_reg |= arg & DB_TMR_OUT_MASK;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
pin_reg &= ~BIT(PULL_DOWN_ENABLE_OFF);
|
|
pin_reg |= (arg & BIT(0)) << PULL_DOWN_ENABLE_OFF;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
pin_reg &= ~BIT(PULL_UP_SEL_OFF);
|
|
pin_reg |= (arg & BIT(0)) << PULL_UP_SEL_OFF;
|
|
pin_reg &= ~BIT(PULL_UP_ENABLE_OFF);
|
|
pin_reg |= ((arg>>1) & BIT(0)) << PULL_UP_ENABLE_OFF;
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
pin_reg &= ~(DRV_STRENGTH_SEL_MASK
|
|
<< DRV_STRENGTH_SEL_OFF);
|
|
pin_reg |= (arg & DRV_STRENGTH_SEL_MASK)
|
|
<< DRV_STRENGTH_SEL_OFF;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev,
|
|
"Invalid config param %04x\n", param);
|
|
ret = -ENOTSUPP;
|
|
}
|
|
|
|
writel(pin_reg, gpio_dev->base + pin*4);
|
|
}
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_pinconf_group_get(struct pinctrl_dev *pctldev,
|
|
unsigned int group,
|
|
unsigned long *config)
|
|
{
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
int ret;
|
|
|
|
ret = amd_get_group_pins(pctldev, group, &pins, &npins);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (amd_pinconf_get(pctldev, pins[0], config))
|
|
return -ENOTSUPP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_pinconf_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned group, unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
int i, ret;
|
|
|
|
ret = amd_get_group_pins(pctldev, group, &pins, &npins);
|
|
if (ret)
|
|
return ret;
|
|
for (i = 0; i < npins; i++) {
|
|
if (amd_pinconf_set(pctldev, pins[i], configs, num_configs))
|
|
return -ENOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops amd_pinconf_ops = {
|
|
.pin_config_get = amd_pinconf_get,
|
|
.pin_config_set = amd_pinconf_set,
|
|
.pin_config_group_get = amd_pinconf_group_get,
|
|
.pin_config_group_set = amd_pinconf_group_set,
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static bool amd_gpio_should_save(struct amd_gpio *gpio_dev, unsigned int pin)
|
|
{
|
|
const struct pin_desc *pd = pin_desc_get(gpio_dev->pctrl, pin);
|
|
|
|
if (!pd)
|
|
return false;
|
|
|
|
/*
|
|
* Only restore the pin if it is actually in use by the kernel (or
|
|
* by userspace).
|
|
*/
|
|
if (pd->mux_owner || pd->gpio_owner ||
|
|
gpiochip_line_is_irq(&gpio_dev->gc, pin))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int amd_gpio_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct amd_gpio *gpio_dev = platform_get_drvdata(pdev);
|
|
struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
|
|
int i;
|
|
|
|
for (i = 0; i < desc->npins; i++) {
|
|
int pin = desc->pins[i].number;
|
|
|
|
if (!amd_gpio_should_save(gpio_dev, pin))
|
|
continue;
|
|
|
|
gpio_dev->saved_regs[i] = readl(gpio_dev->base + pin*4);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_gpio_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct amd_gpio *gpio_dev = platform_get_drvdata(pdev);
|
|
struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
|
|
int i;
|
|
|
|
for (i = 0; i < desc->npins; i++) {
|
|
int pin = desc->pins[i].number;
|
|
|
|
if (!amd_gpio_should_save(gpio_dev, pin))
|
|
continue;
|
|
|
|
writel(gpio_dev->saved_regs[i], gpio_dev->base + pin*4);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops amd_gpio_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(amd_gpio_suspend,
|
|
amd_gpio_resume)
|
|
};
|
|
#endif
|
|
|
|
static struct pinctrl_desc amd_pinctrl_desc = {
|
|
.pins = kerncz_pins,
|
|
.npins = ARRAY_SIZE(kerncz_pins),
|
|
.pctlops = &amd_pinctrl_ops,
|
|
.confops = &amd_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int amd_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
int irq_base;
|
|
struct resource *res;
|
|
struct amd_gpio *gpio_dev;
|
|
|
|
gpio_dev = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct amd_gpio), GFP_KERNEL);
|
|
if (!gpio_dev)
|
|
return -ENOMEM;
|
|
|
|
raw_spin_lock_init(&gpio_dev->lock);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "Failed to get gpio io resource.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio_dev->base = devm_ioremap_nocache(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (!gpio_dev->base)
|
|
return -ENOMEM;
|
|
|
|
irq_base = platform_get_irq(pdev, 0);
|
|
if (irq_base < 0) {
|
|
dev_err(&pdev->dev, "Failed to get gpio IRQ: %d\n", irq_base);
|
|
return irq_base;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
gpio_dev->saved_regs = devm_kcalloc(&pdev->dev, amd_pinctrl_desc.npins,
|
|
sizeof(*gpio_dev->saved_regs),
|
|
GFP_KERNEL);
|
|
if (!gpio_dev->saved_regs)
|
|
return -ENOMEM;
|
|
#endif
|
|
|
|
gpio_dev->pdev = pdev;
|
|
gpio_dev->gc.direction_input = amd_gpio_direction_input;
|
|
gpio_dev->gc.direction_output = amd_gpio_direction_output;
|
|
gpio_dev->gc.get = amd_gpio_get_value;
|
|
gpio_dev->gc.set = amd_gpio_set_value;
|
|
gpio_dev->gc.set_config = amd_gpio_set_config;
|
|
gpio_dev->gc.dbg_show = amd_gpio_dbg_show;
|
|
|
|
gpio_dev->gc.base = -1;
|
|
gpio_dev->gc.label = pdev->name;
|
|
gpio_dev->gc.owner = THIS_MODULE;
|
|
gpio_dev->gc.parent = &pdev->dev;
|
|
gpio_dev->gc.ngpio = resource_size(res) / 4;
|
|
#if defined(CONFIG_OF_GPIO)
|
|
gpio_dev->gc.of_node = pdev->dev.of_node;
|
|
#endif
|
|
|
|
gpio_dev->hwbank_num = gpio_dev->gc.ngpio / 64;
|
|
gpio_dev->groups = kerncz_groups;
|
|
gpio_dev->ngroups = ARRAY_SIZE(kerncz_groups);
|
|
|
|
amd_pinctrl_desc.name = dev_name(&pdev->dev);
|
|
gpio_dev->pctrl = devm_pinctrl_register(&pdev->dev, &amd_pinctrl_desc,
|
|
gpio_dev);
|
|
if (IS_ERR(gpio_dev->pctrl)) {
|
|
dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
|
|
return PTR_ERR(gpio_dev->pctrl);
|
|
}
|
|
|
|
ret = gpiochip_add_data(&gpio_dev->gc, gpio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gpiochip_add_pin_range(&gpio_dev->gc, dev_name(&pdev->dev),
|
|
0, 0, gpio_dev->gc.ngpio);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to add pin range\n");
|
|
goto out2;
|
|
}
|
|
|
|
ret = gpiochip_irqchip_add(&gpio_dev->gc,
|
|
&amd_gpio_irqchip,
|
|
0,
|
|
handle_simple_irq,
|
|
IRQ_TYPE_NONE);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "could not add irqchip\n");
|
|
ret = -ENODEV;
|
|
goto out2;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler, 0,
|
|
KBUILD_MODNAME, gpio_dev);
|
|
if (ret)
|
|
goto out2;
|
|
|
|
platform_set_drvdata(pdev, gpio_dev);
|
|
|
|
dev_dbg(&pdev->dev, "amd gpio driver loaded\n");
|
|
return ret;
|
|
|
|
out2:
|
|
gpiochip_remove(&gpio_dev->gc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct amd_gpio *gpio_dev;
|
|
|
|
gpio_dev = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&gpio_dev->gc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct acpi_device_id amd_gpio_acpi_match[] = {
|
|
{ "AMD0030", 0 },
|
|
{ "AMDI0030", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, amd_gpio_acpi_match);
|
|
|
|
static struct platform_driver amd_gpio_driver = {
|
|
.driver = {
|
|
.name = "amd_gpio",
|
|
.acpi_match_table = ACPI_PTR(amd_gpio_acpi_match),
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.pm = &amd_gpio_pm_ops,
|
|
#endif
|
|
},
|
|
.probe = amd_gpio_probe,
|
|
.remove = amd_gpio_remove,
|
|
};
|
|
|
|
module_platform_driver(amd_gpio_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Ken Xue <Ken.Xue@amd.com>, Jeff Wu <Jeff.Wu@amd.com>");
|
|
MODULE_DESCRIPTION("AMD GPIO pinctrl driver");
|