mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 17:35:17 +07:00
5a6681e22c
Rationale: The differences between Falcon and Siena are in many ways larger than those between Siena and EF10 (despite Siena being nominally "Falcon- architecture"); for instance, Falcon has no MCPU, so there is no MCDI. Removing Falcon support from the sfc driver should simplify the latter, and avoid the possibility of Falcon support being broken by changes to sfc (which are rarely if ever tested on Falcon, it being end-of-lifed hardware). The sfc-falcon driver created in this changeset is essentially a copy of the sfc driver, but with Siena- and EF10-specific code, including MCDI, removed and with the "efx_" identifier prefix changed to "ef4_" (for "EFX 4000- series") to avoid collisions when both drivers are built-in. This changeset removes Falcon from the sfc driver's PCI ID table; then in sfc I've removed obvious Falcon-related code: I removed the Falcon NIC functions, Falcon PHY code, and EFX_REV_FALCON_*, then fixed up everything that referenced them. Also, increment minor version of both drivers (to 4.1). For now, CONFIG_SFC selects CONFIG_SFC_FALCON, so that updating old configs doesn't cause Falcon support to disappear; but that should be undone at some point in the future. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
185 lines
5.8 KiB
Plaintext
185 lines
5.8 KiB
Plaintext
#
|
|
# Ethernet LAN device configuration
|
|
#
|
|
|
|
menuconfig ETHERNET
|
|
bool "Ethernet driver support"
|
|
depends on NET
|
|
default y
|
|
---help---
|
|
This section contains all the Ethernet device drivers.
|
|
|
|
if ETHERNET
|
|
|
|
config MDIO
|
|
tristate
|
|
|
|
config SUNGEM_PHY
|
|
tristate
|
|
|
|
source "drivers/net/ethernet/3com/Kconfig"
|
|
source "drivers/net/ethernet/adaptec/Kconfig"
|
|
source "drivers/net/ethernet/aeroflex/Kconfig"
|
|
source "drivers/net/ethernet/agere/Kconfig"
|
|
source "drivers/net/ethernet/allwinner/Kconfig"
|
|
source "drivers/net/ethernet/alteon/Kconfig"
|
|
source "drivers/net/ethernet/altera/Kconfig"
|
|
source "drivers/net/ethernet/amazon/Kconfig"
|
|
source "drivers/net/ethernet/amd/Kconfig"
|
|
source "drivers/net/ethernet/apm/Kconfig"
|
|
source "drivers/net/ethernet/apple/Kconfig"
|
|
source "drivers/net/ethernet/arc/Kconfig"
|
|
source "drivers/net/ethernet/atheros/Kconfig"
|
|
source "drivers/net/ethernet/aurora/Kconfig"
|
|
source "drivers/net/ethernet/cadence/Kconfig"
|
|
source "drivers/net/ethernet/adi/Kconfig"
|
|
source "drivers/net/ethernet/broadcom/Kconfig"
|
|
source "drivers/net/ethernet/brocade/Kconfig"
|
|
source "drivers/net/ethernet/calxeda/Kconfig"
|
|
source "drivers/net/ethernet/cavium/Kconfig"
|
|
source "drivers/net/ethernet/chelsio/Kconfig"
|
|
source "drivers/net/ethernet/cirrus/Kconfig"
|
|
source "drivers/net/ethernet/cisco/Kconfig"
|
|
|
|
config CX_ECAT
|
|
tristate "Beckhoff CX5020 EtherCAT master support"
|
|
depends on PCI
|
|
depends on X86 || COMPILE_TEST
|
|
---help---
|
|
Driver for EtherCAT master module located on CCAT FPGA
|
|
that can be found on Beckhoff CX5020, and possibly other of CX
|
|
Beckhoff CX series industrial PCs.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called ec_bhf.
|
|
|
|
source "drivers/net/ethernet/davicom/Kconfig"
|
|
|
|
config DNET
|
|
tristate "Dave ethernet support (DNET)"
|
|
depends on HAS_IOMEM
|
|
select PHYLIB
|
|
---help---
|
|
The Dave ethernet interface (DNET) is found on Qong Board FPGA.
|
|
Say Y to include support for the DNET chip.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called dnet.
|
|
|
|
source "drivers/net/ethernet/dec/Kconfig"
|
|
source "drivers/net/ethernet/dlink/Kconfig"
|
|
source "drivers/net/ethernet/emulex/Kconfig"
|
|
source "drivers/net/ethernet/ezchip/Kconfig"
|
|
source "drivers/net/ethernet/neterion/Kconfig"
|
|
source "drivers/net/ethernet/faraday/Kconfig"
|
|
source "drivers/net/ethernet/freescale/Kconfig"
|
|
source "drivers/net/ethernet/fujitsu/Kconfig"
|
|
source "drivers/net/ethernet/hisilicon/Kconfig"
|
|
source "drivers/net/ethernet/hp/Kconfig"
|
|
source "drivers/net/ethernet/ibm/Kconfig"
|
|
source "drivers/net/ethernet/intel/Kconfig"
|
|
source "drivers/net/ethernet/i825xx/Kconfig"
|
|
source "drivers/net/ethernet/xscale/Kconfig"
|
|
|
|
config JME
|
|
tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
|
|
depends on PCI
|
|
select CRC32
|
|
select MII
|
|
---help---
|
|
This driver supports the PCI-Express gigabit ethernet adapters
|
|
based on JMicron JMC250 chipset.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called jme.
|
|
|
|
config KORINA
|
|
tristate "Korina (IDT RC32434) Ethernet support"
|
|
depends on MIKROTIK_RB532
|
|
---help---
|
|
If you have a Mikrotik RouterBoard 500 or IDT RC32434
|
|
based system say Y. Otherwise say N.
|
|
|
|
config LANTIQ_ETOP
|
|
tristate "Lantiq SoC ETOP driver"
|
|
depends on SOC_TYPE_XWAY
|
|
---help---
|
|
Support for the MII0 inside the Lantiq SoC
|
|
|
|
source "drivers/net/ethernet/marvell/Kconfig"
|
|
source "drivers/net/ethernet/mediatek/Kconfig"
|
|
source "drivers/net/ethernet/mellanox/Kconfig"
|
|
source "drivers/net/ethernet/micrel/Kconfig"
|
|
source "drivers/net/ethernet/microchip/Kconfig"
|
|
source "drivers/net/ethernet/moxa/Kconfig"
|
|
source "drivers/net/ethernet/myricom/Kconfig"
|
|
|
|
config FEALNX
|
|
tristate "Myson MTD-8xx PCI Ethernet support"
|
|
depends on PCI
|
|
select CRC32
|
|
select MII
|
|
---help---
|
|
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
|
|
cards. <http://www.myson.com.tw/>
|
|
|
|
source "drivers/net/ethernet/natsemi/Kconfig"
|
|
source "drivers/net/ethernet/netronome/Kconfig"
|
|
source "drivers/net/ethernet/8390/Kconfig"
|
|
|
|
config NET_NETX
|
|
tristate "NetX Ethernet support"
|
|
select MII
|
|
depends on ARCH_NETX
|
|
---help---
|
|
This is support for the Hilscher netX builtin Ethernet ports
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called netx-eth.
|
|
|
|
source "drivers/net/ethernet/nuvoton/Kconfig"
|
|
source "drivers/net/ethernet/nvidia/Kconfig"
|
|
source "drivers/net/ethernet/nxp/Kconfig"
|
|
source "drivers/net/ethernet/oki-semi/Kconfig"
|
|
|
|
config ETHOC
|
|
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
|
|
depends on HAS_IOMEM && HAS_DMA
|
|
select MII
|
|
select PHYLIB
|
|
select CRC32
|
|
select BITREVERSE
|
|
---help---
|
|
Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
|
|
|
|
source "drivers/net/ethernet/packetengines/Kconfig"
|
|
source "drivers/net/ethernet/pasemi/Kconfig"
|
|
source "drivers/net/ethernet/qlogic/Kconfig"
|
|
source "drivers/net/ethernet/qualcomm/Kconfig"
|
|
source "drivers/net/ethernet/realtek/Kconfig"
|
|
source "drivers/net/ethernet/renesas/Kconfig"
|
|
source "drivers/net/ethernet/rdc/Kconfig"
|
|
source "drivers/net/ethernet/rocker/Kconfig"
|
|
source "drivers/net/ethernet/samsung/Kconfig"
|
|
source "drivers/net/ethernet/seeq/Kconfig"
|
|
source "drivers/net/ethernet/silan/Kconfig"
|
|
source "drivers/net/ethernet/sis/Kconfig"
|
|
source "drivers/net/ethernet/sfc/Kconfig"
|
|
source "drivers/net/ethernet/sfc/falcon/Kconfig"
|
|
source "drivers/net/ethernet/sgi/Kconfig"
|
|
source "drivers/net/ethernet/smsc/Kconfig"
|
|
source "drivers/net/ethernet/stmicro/Kconfig"
|
|
source "drivers/net/ethernet/sun/Kconfig"
|
|
source "drivers/net/ethernet/synopsys/Kconfig"
|
|
source "drivers/net/ethernet/tehuti/Kconfig"
|
|
source "drivers/net/ethernet/ti/Kconfig"
|
|
source "drivers/net/ethernet/tile/Kconfig"
|
|
source "drivers/net/ethernet/toshiba/Kconfig"
|
|
source "drivers/net/ethernet/tundra/Kconfig"
|
|
source "drivers/net/ethernet/via/Kconfig"
|
|
source "drivers/net/ethernet/wiznet/Kconfig"
|
|
source "drivers/net/ethernet/xilinx/Kconfig"
|
|
source "drivers/net/ethernet/xircom/Kconfig"
|
|
|
|
endif # ETHERNET
|