mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 18:17:12 +07:00
c03e017c4d
This patch add support for Richtek RT8973A which is Micro USB Switch OVP and i2c interface. The RT8973A is a USB port accessory detector and switch that is optimized to protect low voltage system from abnormal high input voltage (up to 28V) and supports high speed USB operation. Also, RT8973A support 'auto-configuration' mode. If auto-configuration mode is enabled, RT8973A would control internal h/w patch for USB D-/D+ switching. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
204 lines
8.1 KiB
C
204 lines
8.1 KiB
C
/*
|
|
* rt8973a.h
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#ifndef __LINUX_EXTCON_RT8973A_H
|
|
#define __LINUX_EXTCON_RT8973A_H
|
|
|
|
enum rt8973a_types {
|
|
TYPE_RT8973A,
|
|
};
|
|
|
|
/* RT8973A registers */
|
|
enum rt8973A_reg {
|
|
RT8973A_REG_DEVICE_ID = 0x1,
|
|
RT8973A_REG_CONTROL1,
|
|
RT8973A_REG_INT1,
|
|
RT8973A_REG_INT2,
|
|
RT8973A_REG_INTM1,
|
|
RT8973A_REG_INTM2,
|
|
RT8973A_REG_ADC,
|
|
RT8973A_REG_RSVD_1,
|
|
RT8973A_REG_RSVD_2,
|
|
RT8973A_REG_DEV1,
|
|
RT8973A_REG_DEV2,
|
|
RT8973A_REG_RSVD_3,
|
|
RT8973A_REG_RSVD_4,
|
|
RT8973A_REG_RSVD_5,
|
|
RT8973A_REG_RSVD_6,
|
|
RT8973A_REG_RSVD_7,
|
|
RT8973A_REG_RSVD_8,
|
|
RT8973A_REG_RSVD_9,
|
|
RT8973A_REG_MANUAL_SW1,
|
|
RT8973A_REG_MANUAL_SW2,
|
|
RT8973A_REG_RSVD_10,
|
|
RT8973A_REG_RSVD_11,
|
|
RT8973A_REG_RSVD_12,
|
|
RT8973A_REG_RSVD_13,
|
|
RT8973A_REG_RSVD_14,
|
|
RT8973A_REG_RSVD_15,
|
|
RT8973A_REG_RESET,
|
|
|
|
RT8973A_REG_END,
|
|
};
|
|
|
|
/* Define RT8973A MASK/SHIFT constant */
|
|
#define RT8973A_REG_DEVICE_ID_VENDOR_SHIFT 0
|
|
#define RT8973A_REG_DEVICE_ID_VERSION_SHIFT 3
|
|
#define RT8973A_REG_DEVICE_ID_VENDOR_MASK (0x7 << RT8973A_REG_DEVICE_ID_VENDOR_SHIFT)
|
|
#define RT8973A_REG_DEVICE_ID_VERSION_MASK (0x1f << RT8973A_REG_DEVICE_ID_VERSION_SHIFT)
|
|
|
|
#define RT8973A_REG_CONTROL1_INTM_SHIFT 0
|
|
#define RT8973A_REG_CONTROL1_AUTO_CONFIG_SHIFT 2
|
|
#define RT8973A_REG_CONTROL1_I2C_RST_EN_SHIFT 3
|
|
#define RT8973A_REG_CONTROL1_SWITCH_OPEN_SHIFT 4
|
|
#define RT8973A_REG_CONTROL1_CHGTYP_SHIFT 5
|
|
#define RT8973A_REG_CONTROL1_USB_CHD_EN_SHIFT 6
|
|
#define RT8973A_REG_CONTROL1_ADC_EN_SHIFT 7
|
|
#define RT8973A_REG_CONTROL1_INTM_MASK (0x1 << RT8973A_REG_CONTROL1_INTM_SHIFT)
|
|
#define RT8973A_REG_CONTROL1_AUTO_CONFIG_MASK (0x1 << RT8973A_REG_CONTROL1_AUTO_CONFIG_SHIFT)
|
|
#define RT8973A_REG_CONTROL1_I2C_RST_EN_MASK (0x1 << RT8973A_REG_CONTROL1_I2C_RST_EN_SHIFT)
|
|
#define RT8973A_REG_CONTROL1_SWITCH_OPEN_MASK (0x1 << RT8973A_REG_CONTROL1_SWITCH_OPEN_SHIFT)
|
|
#define RT8973A_REG_CONTROL1_CHGTYP_MASK (0x1 << RT8973A_REG_CONTROL1_CHGTYP_SHIFT)
|
|
#define RT8973A_REG_CONTROL1_USB_CHD_EN_MASK (0x1 << RT8973A_REG_CONTROL1_USB_CHD_EN_SHIFT)
|
|
#define RT8973A_REG_CONTROL1_ADC_EN_MASK (0x1 << RT8973A_REG_CONTROL1_ADC_EN_SHIFT)
|
|
|
|
#define RT9873A_REG_INTM1_ATTACH_SHIFT 0
|
|
#define RT9873A_REG_INTM1_DETACH_SHIFT 1
|
|
#define RT9873A_REG_INTM1_CHGDET_SHIFT 2
|
|
#define RT9873A_REG_INTM1_DCD_T_SHIFT 3
|
|
#define RT9873A_REG_INTM1_OVP_SHIFT 4
|
|
#define RT9873A_REG_INTM1_CONNECT_SHIFT 5
|
|
#define RT9873A_REG_INTM1_ADC_CHG_SHIFT 6
|
|
#define RT9873A_REG_INTM1_OTP_SHIFT 7
|
|
#define RT9873A_REG_INTM1_ATTACH_MASK (0x1 << RT9873A_REG_INTM1_ATTACH_SHIFT)
|
|
#define RT9873A_REG_INTM1_DETACH_MASK (0x1 << RT9873A_REG_INTM1_DETACH_SHIFT)
|
|
#define RT9873A_REG_INTM1_CHGDET_MASK (0x1 << RT9873A_REG_INTM1_CHGDET_SHIFT)
|
|
#define RT9873A_REG_INTM1_DCD_T_MASK (0x1 << RT9873A_REG_INTM1_DCD_T_SHIFT)
|
|
#define RT9873A_REG_INTM1_OVP_MASK (0x1 << RT9873A_REG_INTM1_OVP_SHIFT)
|
|
#define RT9873A_REG_INTM1_CONNECT_MASK (0x1 << RT9873A_REG_INTM1_CONNECT_SHIFT)
|
|
#define RT9873A_REG_INTM1_ADC_CHG_MASK (0x1 << RT9873A_REG_INTM1_ADC_CHG_SHIFT)
|
|
#define RT9873A_REG_INTM1_OTP_MASK (0x1 << RT9873A_REG_INTM1_OTP_SHIFT)
|
|
|
|
#define RT9873A_REG_INTM2_UVLO_SHIFT 1
|
|
#define RT9873A_REG_INTM2_POR_SHIFT 2
|
|
#define RT9873A_REG_INTM2_OTP_FET_SHIFT 3
|
|
#define RT9873A_REG_INTM2_OVP_FET_SHIFT 4
|
|
#define RT9873A_REG_INTM2_OCP_LATCH_SHIFT 5
|
|
#define RT9873A_REG_INTM2_OCP_SHIFT 6
|
|
#define RT9873A_REG_INTM2_OVP_OCP_SHIFT 7
|
|
#define RT9873A_REG_INTM2_UVLO_MASK (0x1 << RT9873A_REG_INTM2_UVLO_SHIFT)
|
|
#define RT9873A_REG_INTM2_POR_MASK (0x1 << RT9873A_REG_INTM2_POR_SHIFT)
|
|
#define RT9873A_REG_INTM2_OTP_FET_MASK (0x1 << RT9873A_REG_INTM2_OTP_FET_SHIFT)
|
|
#define RT9873A_REG_INTM2_OVP_FET_MASK (0x1 << RT9873A_REG_INTM2_OVP_FET_SHIFT)
|
|
#define RT9873A_REG_INTM2_OCP_LATCH_MASK (0x1 << RT9873A_REG_INTM2_OCP_LATCH_SHIFT)
|
|
#define RT9873A_REG_INTM2_OCP_MASK (0x1 << RT9873A_REG_INTM2_OCP_SHIFT)
|
|
#define RT9873A_REG_INTM2_OVP_OCP_MASK (0x1 << RT9873A_REG_INTM2_OVP_OCP_SHIFT)
|
|
|
|
#define RT8973A_REG_ADC_SHIFT 0
|
|
#define RT8973A_REG_ADC_MASK (0x1f << RT8973A_REG_ADC_SHIFT)
|
|
|
|
#define RT8973A_REG_DEV1_OTG_SHIFT 0
|
|
#define RT8973A_REG_DEV1_SDP_SHIFT 2
|
|
#define RT8973A_REG_DEV1_UART_SHIFT 3
|
|
#define RT8973A_REG_DEV1_CAR_KIT_TYPE1_SHIFT 4
|
|
#define RT8973A_REG_DEV1_CDPORT_SHIFT 5
|
|
#define RT8973A_REG_DEV1_DCPORT_SHIFT 6
|
|
#define RT8973A_REG_DEV1_OTG_MASK (0x1 << RT8973A_REG_DEV1_OTG_SHIFT)
|
|
#define RT8973A_REG_DEV1_SDP_MASK (0x1 << RT8973A_REG_DEV1_SDP_SHIFT)
|
|
#define RT8973A_REG_DEV1_UART_MASK (0x1 << RT8973A_REG_DEV1_UART_SHIFT)
|
|
#define RT8973A_REG_DEV1_CAR_KIT_TYPE1_MASK (0x1 << RT8973A_REG_DEV1_CAR_KIT_TYPE1_SHIFT)
|
|
#define RT8973A_REG_DEV1_CDPORT_MASK (0x1 << RT8973A_REG_DEV1_CDPORT_SHIFT)
|
|
#define RT8973A_REG_DEV1_DCPORT_MASK (0x1 << RT8973A_REG_DEV1_DCPORT_SHIFT)
|
|
#define RT8973A_REG_DEV1_USB_MASK (RT8973A_REG_DEV1_SDP_MASK \
|
|
| RT8973A_REG_DEV1_CDPORT_MASK)
|
|
|
|
#define RT8973A_REG_DEV2_JIG_USB_ON_SHIFT 0
|
|
#define RT8973A_REG_DEV2_JIG_USB_OFF_SHIFT 1
|
|
#define RT8973A_REG_DEV2_JIG_UART_ON_SHIFT 2
|
|
#define RT8973A_REG_DEV2_JIG_UART_OFF_SHIFT 3
|
|
#define RT8973A_REG_DEV2_JIG_USB_ON_MASK (0x1 << RT8973A_REG_DEV2_JIG_USB_ON_SHIFT)
|
|
#define RT8973A_REG_DEV2_JIG_USB_OFF_MASK (0x1 << RT8973A_REG_DEV2_JIG_USB_OFF_SHIFT)
|
|
#define RT8973A_REG_DEV2_JIG_UART_ON_MASK (0x1 << RT8973A_REG_DEV2_JIG_UART_ON_SHIFT)
|
|
#define RT8973A_REG_DEV2_JIG_UART_OFF_MASK (0x1 << RT8973A_REG_DEV2_JIG_UART_OFF_SHIFT)
|
|
|
|
#define RT8973A_REG_MANUAL_SW1_DP_SHIFT 2
|
|
#define RT8973A_REG_MANUAL_SW1_DM_SHIFT 5
|
|
#define RT8973A_REG_MANUAL_SW1_DP_MASK (0x7 << RT8973A_REG_MANUAL_SW1_DP_SHIFT)
|
|
#define RT8973A_REG_MANUAL_SW1_DM_MASK (0x7 << RT8973A_REG_MANUAL_SW1_DM_SHIFT)
|
|
#define DM_DP_CON_SWITCH_OPEN 0x0
|
|
#define DM_DP_CON_SWITCH_USB 0x1
|
|
#define DM_DP_CON_SWITCH_UART 0x3
|
|
#define DM_DP_SWITCH_OPEN ((DM_DP_CON_SWITCH_OPEN << RT8973A_REG_MANUAL_SW1_DP_SHIFT) \
|
|
| (DM_DP_CON_SWITCH_OPEN << RT8973A_REG_MANUAL_SW1_DM_SHIFT))
|
|
#define DM_DP_SWITCH_USB ((DM_DP_CON_SWITCH_USB << RT8973A_REG_MANUAL_SW1_DP_SHIFT) \
|
|
| (DM_DP_CON_SWITCH_USB << RT8973A_REG_MANUAL_SW1_DM_SHIFT))
|
|
#define DM_DP_SWITCH_UART ((DM_DP_CON_SWITCH_UART << RT8973A_REG_MANUAL_SW1_DP_SHIFT) \
|
|
| (DM_DP_CON_SWITCH_UART << RT8973A_REG_MANUAL_SW1_DM_SHIFT))
|
|
|
|
#define RT8973A_REG_MANUAL_SW2_FET_ON_SHIFT 0
|
|
#define RT8973A_REG_MANUAL_SW2_JIG_ON_SHIFT 2
|
|
#define RT8973A_REG_MANUAL_SW2_BOOT_SW_SHIFT 3
|
|
#define RT8973A_REG_MANUAL_SW2_FET_ON_MASK (0x1 << RT8973A_REG_MANUAL_SW2_FET_ON_SHIFT)
|
|
#define RT8973A_REG_MANUAL_SW2_JIG_ON_MASK (0x1 << RT8973A_REG_MANUAL_SW2_JIG_ON_SHIFT)
|
|
#define RT8973A_REG_MANUAL_SW2_BOOT_SW_MASK (0x1 << RT8973A_REG_MANUAL_SW2_BOOT_SW_SHIFT)
|
|
#define RT8973A_REG_MANUAL_SW2_FET_ON 0
|
|
#define RT8973A_REG_MANUAL_SW2_FET_OFF 0x1
|
|
#define RT8973A_REG_MANUAL_SW2_JIG_OFF 0
|
|
#define RT8973A_REG_MANUAL_SW2_JIG_ON 0x1
|
|
#define RT8973A_REG_MANUAL_SW2_BOOT_SW_ON 0
|
|
#define RT8973A_REG_MANUAL_SW2_BOOT_SW_OFF 0x1
|
|
|
|
#define RT8973A_REG_RESET_SHIFT 0
|
|
#define RT8973A_REG_RESET_MASK (0x1 << RT8973A_REG_RESET_SHIFT)
|
|
#define RT8973A_REG_RESET 0x1
|
|
|
|
/* RT8973A Interrupts */
|
|
enum rt8973a_irq {
|
|
/* Interrupt1*/
|
|
RT8973A_INT1_ATTACH,
|
|
RT8973A_INT1_DETACH,
|
|
RT8973A_INT1_CHGDET,
|
|
RT8973A_INT1_DCD_T,
|
|
RT8973A_INT1_OVP,
|
|
RT8973A_INT1_CONNECT,
|
|
RT8973A_INT1_ADC_CHG,
|
|
RT8973A_INT1_OTP,
|
|
|
|
/* Interrupt2*/
|
|
RT8973A_INT2_UVLO,
|
|
RT8973A_INT2_POR,
|
|
RT8973A_INT2_OTP_FET,
|
|
RT8973A_INT2_OVP_FET,
|
|
RT8973A_INT2_OCP_LATCH,
|
|
RT8973A_INT2_OCP,
|
|
RT8973A_INT2_OVP_OCP,
|
|
|
|
RT8973A_NUM,
|
|
};
|
|
|
|
#define RT8973A_INT1_ATTACH_MASK BIT(0)
|
|
#define RT8973A_INT1_DETACH_MASK BIT(1)
|
|
#define RT8973A_INT1_CHGDET_MASK BIT(2)
|
|
#define RT8973A_INT1_DCD_T_MASK BIT(3)
|
|
#define RT8973A_INT1_OVP_MASK BIT(4)
|
|
#define RT8973A_INT1_CONNECT_MASK BIT(5)
|
|
#define RT8973A_INT1_ADC_CHG_MASK BIT(6)
|
|
#define RT8973A_INT1_OTP_MASK BIT(7)
|
|
#define RT8973A_INT2_UVLOT_MASK BIT(0)
|
|
#define RT8973A_INT2_POR_MASK BIT(1)
|
|
#define RT8973A_INT2_OTP_FET_MASK BIT(2)
|
|
#define RT8973A_INT2_OVP_FET_MASK BIT(3)
|
|
#define RT8973A_INT2_OCP_LATCH_MASK BIT(4)
|
|
#define RT8973A_INT2_OCP_MASK BIT(5)
|
|
#define RT8973A_INT2_OVP_OCP_MASK BIT(6)
|
|
|
|
#endif /* __LINUX_EXTCON_RT8973A_H */
|