mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 18:37:53 +07:00
2f01a1f588
wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
296 lines
8.0 KiB
C
296 lines
8.0 KiB
C
/*
|
|
* This file is part of wl12xx
|
|
*
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
*
|
|
* Contact: Kalle Valo <kalle.valo@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
|
|
#include "reg.h"
|
|
#include "boot.h"
|
|
#include "spi.h"
|
|
#include "event.h"
|
|
|
|
static void wl12xx_boot_enable_interrupts(struct wl12xx *wl)
|
|
{
|
|
enable_irq(wl->irq);
|
|
}
|
|
|
|
void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl)
|
|
{
|
|
wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
|
|
wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
|
|
}
|
|
|
|
int wl12xx_boot_soft_reset(struct wl12xx *wl)
|
|
{
|
|
unsigned long timeout;
|
|
u32 boot_data;
|
|
|
|
/* perform soft reset */
|
|
wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
|
|
|
|
/* SOFT_RESET is self clearing */
|
|
timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
|
|
while (1) {
|
|
boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
|
|
wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
|
|
if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
|
|
break;
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
/* 1.2 check pWhalBus->uSelfClearTime if the
|
|
* timeout was reached */
|
|
wl12xx_error("soft reset timeout");
|
|
return -1;
|
|
}
|
|
|
|
udelay(SOFT_RESET_STALL_TIME);
|
|
}
|
|
|
|
/* disable Rx/Tx */
|
|
wl12xx_reg_write32(wl, ENABLE, 0x0);
|
|
|
|
/* disable auto calibration on start*/
|
|
wl12xx_reg_write32(wl, SPARE_A2, 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wl12xx_boot_init_seq(struct wl12xx *wl)
|
|
{
|
|
u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
|
|
|
|
/*
|
|
* col #1: INTEGER_DIVIDER
|
|
* col #2: FRACTIONAL_DIVIDER
|
|
* col #3: ATTN_BB
|
|
* col #4: ALPHA_BB
|
|
* col #5: STOP_TIME_BB
|
|
* col #6: BB_PLL_LOOP_FILTER
|
|
*/
|
|
static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
|
|
|
|
{ 83, 87381, 0xB, 5, 0xF00, 3}, /* REF_FREQ_19_2*/
|
|
{ 61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
|
|
{ 41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
|
|
{ 40, 0, 0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
|
|
{ 47, 162280, 0xC, 6, 0x2760, 1} /* REF_FREQ_33_6 */
|
|
};
|
|
|
|
/* read NVS params */
|
|
scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6);
|
|
wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
|
|
|
|
/* read ELP_CMD */
|
|
elp_cmd = wl12xx_reg_read32(wl, ELP_CMD);
|
|
wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
|
|
|
|
/* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
|
|
ref_freq = scr_pad6 & 0x000000FF;
|
|
wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
|
|
|
|
wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9);
|
|
|
|
/*
|
|
* PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
|
|
*/
|
|
wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6);
|
|
|
|
/*
|
|
* set the clock detect feature to work in the restart wu procedure
|
|
* (ELP_CFG_MODE[14]) and Select the clock source type
|
|
* (ELP_CFG_MODE[13:12])
|
|
*/
|
|
tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
|
|
wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp);
|
|
|
|
/* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
|
|
elp_cmd |= 0x00000040;
|
|
wl12xx_reg_write32(wl, ELP_CMD, elp_cmd);
|
|
|
|
/* PG 1.2: Set the BB PLL stable time to be 1000usec
|
|
* (PLL_STABLE_TIME) */
|
|
wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
|
|
|
|
/* PG 1.2: read clock request time */
|
|
init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME);
|
|
|
|
/*
|
|
* PG 1.2: set the clock request time to be ref_clk_settling_time -
|
|
* 1ms = 4ms
|
|
*/
|
|
if (init_data > 0x21)
|
|
tmp = init_data - 0x21;
|
|
else
|
|
tmp = 0;
|
|
wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp);
|
|
|
|
/* set BB PLL configurations in RF AFE */
|
|
wl12xx_reg_write32(wl, 0x003058cc, 0x4B5);
|
|
|
|
/* set RF_AFE_REG_5 */
|
|
wl12xx_reg_write32(wl, 0x003058d4, 0x50);
|
|
|
|
/* set RF_AFE_CTRL_REG_2 */
|
|
wl12xx_reg_write32(wl, 0x00305948, 0x11c001);
|
|
|
|
/*
|
|
* change RF PLL and BB PLL divider for VCO clock and adjust VCO
|
|
* bais current(RF_AFE_REG_13)
|
|
*/
|
|
wl12xx_reg_write32(wl, 0x003058f4, 0x1e);
|
|
|
|
/* set BB PLL configurations */
|
|
tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
|
|
wl12xx_reg_write32(wl, 0x00305840, tmp);
|
|
|
|
/* set fractional divider according to Appendix C-BB PLL
|
|
* Calculations
|
|
*/
|
|
tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
|
|
wl12xx_reg_write32(wl, 0x00305844, tmp);
|
|
|
|
/* set the initial data for the sigma delta */
|
|
wl12xx_reg_write32(wl, 0x00305848, 0x3039);
|
|
|
|
/*
|
|
* set the accumulator attenuation value, calibration loop1
|
|
* (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
|
|
* the VCO gain
|
|
*/
|
|
tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
|
|
(LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
|
|
wl12xx_reg_write32(wl, 0x00305854, tmp);
|
|
|
|
/*
|
|
* set the calibration stop time after holdoff time expires and set
|
|
* settling time HOLD_OFF_TIME_BB
|
|
*/
|
|
tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
|
|
wl12xx_reg_write32(wl, 0x00305858, tmp);
|
|
|
|
/*
|
|
* set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
|
|
* constant leakage current to linearize PFD to 0uA -
|
|
* BB_ILOOPF[7:3]
|
|
*/
|
|
tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
|
|
wl12xx_reg_write32(wl, 0x003058f8, tmp);
|
|
|
|
/*
|
|
* set regulator output voltage for n divider to
|
|
* 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
|
|
* set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
|
|
* PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
|
|
*/
|
|
wl12xx_reg_write32(wl, 0x003058f0, 0x29);
|
|
|
|
/* enable restart wakeup sequence (ELP_CMD[0]) */
|
|
wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
|
|
|
|
/* restart sequence completed */
|
|
udelay(2000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wl12xx_boot_run_firmware(struct wl12xx *wl)
|
|
{
|
|
int loop, ret;
|
|
u32 chip_id, interrupt;
|
|
|
|
wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
|
|
|
|
chip_id = wl12xx_reg_read32(wl, CHIP_ID_B);
|
|
|
|
wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
|
|
|
|
if (chip_id != wl->chip.id) {
|
|
wl12xx_error("chip id doesn't match after firmware boot");
|
|
return -EIO;
|
|
}
|
|
|
|
/* wait for init to complete */
|
|
loop = 0;
|
|
while (loop++ < INIT_LOOP) {
|
|
udelay(INIT_LOOP_DELAY);
|
|
interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
|
|
|
|
if (interrupt == 0xffffffff) {
|
|
wl12xx_error("error reading hardware complete "
|
|
"init indication");
|
|
return -EIO;
|
|
}
|
|
/* check that ACX_INTR_INIT_COMPLETE is enabled */
|
|
else if (interrupt & wl->chip.intr_init_complete) {
|
|
wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
|
|
wl->chip.intr_init_complete);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (loop >= INIT_LOOP) {
|
|
wl12xx_error("timeout waiting for the hardware to "
|
|
"complete initialization");
|
|
return -EIO;
|
|
}
|
|
|
|
/* get hardware config command mail box */
|
|
wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
|
|
|
|
/* get hardware config event mail box */
|
|
wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
|
|
|
|
/* set the working partition to its "running" mode offset */
|
|
wl12xx_set_partition(wl,
|
|
wl->chip.p_table[PART_WORK].mem.start,
|
|
wl->chip.p_table[PART_WORK].mem.size,
|
|
wl->chip.p_table[PART_WORK].reg.start,
|
|
wl->chip.p_table[PART_WORK].reg.size);
|
|
|
|
wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
|
|
wl->cmd_box_addr, wl->event_box_addr);
|
|
|
|
/*
|
|
* in case of full asynchronous mode the firmware event must be
|
|
* ready to receive event from the command mailbox
|
|
*/
|
|
|
|
/* enable gpio interrupts */
|
|
wl12xx_boot_enable_interrupts(wl);
|
|
|
|
wl->chip.op_target_enable_interrupts(wl);
|
|
|
|
/* unmask all mbox events */
|
|
wl->event_mask = 0xffffffff;
|
|
|
|
ret = wl12xx_event_unmask(wl);
|
|
if (ret < 0) {
|
|
wl12xx_error("EVENT mask setting failed");
|
|
return ret;
|
|
}
|
|
|
|
wl12xx_event_mbox_config(wl);
|
|
|
|
/* firmware startup completed */
|
|
return 0;
|
|
}
|