mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:46:40 +07:00
6ab3d5624e
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
866 lines
20 KiB
C
866 lines
20 KiB
C
/*
|
|
* linux/drivers/serial/pxa.c
|
|
*
|
|
* Based on drivers/serial/8250.c by Russell King.
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Feb 20, 2003
|
|
* Copyright: (C) 2003 Monta Vista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Note 1: This driver is made separate from the already too overloaded
|
|
* 8250.c because it needs some kirks of its own and that'll make it
|
|
* easier to add DMA support.
|
|
*
|
|
* Note 2: I'm too sick of device allocation policies for serial ports.
|
|
* If someone else wants to request an "official" allocation of major/minor
|
|
* for this driver please be my guest. And don't forget that new hardware
|
|
* to come from Intel might have more than 3 or 4 of those UARTs. Let's
|
|
* hope for a better port registration and dynamic device allocation scheme
|
|
* with the serial core maintainer satisfaction to appear soon.
|
|
*/
|
|
|
|
|
|
#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/circ_buf.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
|
|
struct uart_pxa_port {
|
|
struct uart_port port;
|
|
unsigned char ier;
|
|
unsigned char lcr;
|
|
unsigned char mcr;
|
|
unsigned int lsr_break_flag;
|
|
unsigned int cken;
|
|
char *name;
|
|
};
|
|
|
|
static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
|
|
{
|
|
offset <<= 2;
|
|
return readl(up->port.membase + offset);
|
|
}
|
|
|
|
static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
|
|
{
|
|
offset <<= 2;
|
|
writel(value, up->port.membase + offset);
|
|
}
|
|
|
|
static void serial_pxa_enable_ms(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
up->ier |= UART_IER_MSI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
|
|
static void serial_pxa_stop_tx(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
if (up->ier & UART_IER_THRI) {
|
|
up->ier &= ~UART_IER_THRI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
}
|
|
|
|
static void serial_pxa_stop_rx(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
up->ier &= ~UART_IER_RLSI;
|
|
up->port.read_status_mask &= ~UART_LSR_DR;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
|
|
static inline void
|
|
receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
|
|
{
|
|
struct tty_struct *tty = up->port.info->tty;
|
|
unsigned int ch, flag;
|
|
int max_count = 256;
|
|
|
|
do {
|
|
ch = serial_in(up, UART_RX);
|
|
flag = TTY_NORMAL;
|
|
up->port.icount.rx++;
|
|
|
|
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
|
|
UART_LSR_FE | UART_LSR_OE))) {
|
|
/*
|
|
* For statistics only
|
|
*/
|
|
if (*status & UART_LSR_BI) {
|
|
*status &= ~(UART_LSR_FE | UART_LSR_PE);
|
|
up->port.icount.brk++;
|
|
/*
|
|
* We do the SysRQ and SAK checking
|
|
* here because otherwise the break
|
|
* may get masked by ignore_status_mask
|
|
* or read_status_mask.
|
|
*/
|
|
if (uart_handle_break(&up->port))
|
|
goto ignore_char;
|
|
} else if (*status & UART_LSR_PE)
|
|
up->port.icount.parity++;
|
|
else if (*status & UART_LSR_FE)
|
|
up->port.icount.frame++;
|
|
if (*status & UART_LSR_OE)
|
|
up->port.icount.overrun++;
|
|
|
|
/*
|
|
* Mask off conditions which should be ignored.
|
|
*/
|
|
*status &= up->port.read_status_mask;
|
|
|
|
#ifdef CONFIG_SERIAL_PXA_CONSOLE
|
|
if (up->port.line == up->port.cons->index) {
|
|
/* Recover the break flag from console xmit */
|
|
*status |= up->lsr_break_flag;
|
|
up->lsr_break_flag = 0;
|
|
}
|
|
#endif
|
|
if (*status & UART_LSR_BI) {
|
|
flag = TTY_BREAK;
|
|
} else if (*status & UART_LSR_PE)
|
|
flag = TTY_PARITY;
|
|
else if (*status & UART_LSR_FE)
|
|
flag = TTY_FRAME;
|
|
}
|
|
|
|
if (uart_handle_sysrq_char(&up->port, ch, regs))
|
|
goto ignore_char;
|
|
|
|
uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
|
|
|
|
ignore_char:
|
|
*status = serial_in(up, UART_LSR);
|
|
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
|
|
tty_flip_buffer_push(tty);
|
|
}
|
|
|
|
static void transmit_chars(struct uart_pxa_port *up)
|
|
{
|
|
struct circ_buf *xmit = &up->port.info->xmit;
|
|
int count;
|
|
|
|
if (up->port.x_char) {
|
|
serial_out(up, UART_TX, up->port.x_char);
|
|
up->port.icount.tx++;
|
|
up->port.x_char = 0;
|
|
return;
|
|
}
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
|
|
serial_pxa_stop_tx(&up->port);
|
|
return;
|
|
}
|
|
|
|
count = up->port.fifosize / 2;
|
|
do {
|
|
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
up->port.icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
} while (--count > 0);
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&up->port);
|
|
|
|
|
|
if (uart_circ_empty(xmit))
|
|
serial_pxa_stop_tx(&up->port);
|
|
}
|
|
|
|
static void serial_pxa_start_tx(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
if (!(up->ier & UART_IER_THRI)) {
|
|
up->ier |= UART_IER_THRI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
}
|
|
|
|
static inline void check_modem_status(struct uart_pxa_port *up)
|
|
{
|
|
int status;
|
|
|
|
status = serial_in(up, UART_MSR);
|
|
|
|
if ((status & UART_MSR_ANY_DELTA) == 0)
|
|
return;
|
|
|
|
if (status & UART_MSR_TERI)
|
|
up->port.icount.rng++;
|
|
if (status & UART_MSR_DDSR)
|
|
up->port.icount.dsr++;
|
|
if (status & UART_MSR_DDCD)
|
|
uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
|
|
if (status & UART_MSR_DCTS)
|
|
uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
|
|
|
|
wake_up_interruptible(&up->port.info->delta_msr_wait);
|
|
}
|
|
|
|
/*
|
|
* This handles the interrupt from one port.
|
|
*/
|
|
static inline irqreturn_t
|
|
serial_pxa_irq(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)dev_id;
|
|
unsigned int iir, lsr;
|
|
|
|
iir = serial_in(up, UART_IIR);
|
|
if (iir & UART_IIR_NO_INT)
|
|
return IRQ_NONE;
|
|
lsr = serial_in(up, UART_LSR);
|
|
if (lsr & UART_LSR_DR)
|
|
receive_chars(up, &lsr, regs);
|
|
check_modem_status(up);
|
|
if (lsr & UART_LSR_THRE)
|
|
transmit_chars(up);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int serial_pxa_tx_empty(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned long flags;
|
|
unsigned int ret;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned char status;
|
|
unsigned int ret;
|
|
|
|
status = serial_in(up, UART_MSR);
|
|
|
|
ret = 0;
|
|
if (status & UART_MSR_DCD)
|
|
ret |= TIOCM_CAR;
|
|
if (status & UART_MSR_RI)
|
|
ret |= TIOCM_RNG;
|
|
if (status & UART_MSR_DSR)
|
|
ret |= TIOCM_DSR;
|
|
if (status & UART_MSR_CTS)
|
|
ret |= TIOCM_CTS;
|
|
return ret;
|
|
}
|
|
|
|
static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned char mcr = 0;
|
|
|
|
if (mctrl & TIOCM_RTS)
|
|
mcr |= UART_MCR_RTS;
|
|
if (mctrl & TIOCM_DTR)
|
|
mcr |= UART_MCR_DTR;
|
|
if (mctrl & TIOCM_OUT1)
|
|
mcr |= UART_MCR_OUT1;
|
|
if (mctrl & TIOCM_OUT2)
|
|
mcr |= UART_MCR_OUT2;
|
|
if (mctrl & TIOCM_LOOP)
|
|
mcr |= UART_MCR_LOOP;
|
|
|
|
mcr |= up->mcr;
|
|
|
|
serial_out(up, UART_MCR, mcr);
|
|
}
|
|
|
|
static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
if (break_state == -1)
|
|
up->lcr |= UART_LCR_SBC;
|
|
else
|
|
up->lcr &= ~UART_LCR_SBC;
|
|
serial_out(up, UART_LCR, up->lcr);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
#if 0
|
|
static void serial_pxa_dma_init(struct pxa_uart *up)
|
|
{
|
|
up->rxdma =
|
|
pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
|
|
if (up->rxdma < 0)
|
|
goto out;
|
|
up->txdma =
|
|
pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
|
|
if (up->txdma < 0)
|
|
goto err_txdma;
|
|
up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
|
|
if (!up->dmadesc)
|
|
goto err_alloc;
|
|
|
|
/* ... */
|
|
err_alloc:
|
|
pxa_free_dma(up->txdma);
|
|
err_rxdma:
|
|
pxa_free_dma(up->rxdma);
|
|
out:
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
static int serial_pxa_startup(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned long flags;
|
|
int retval;
|
|
|
|
if (port->line == 3) /* HWUART */
|
|
up->mcr |= UART_MCR_AFE;
|
|
else
|
|
up->mcr = 0;
|
|
|
|
/*
|
|
* Allocate the IRQ
|
|
*/
|
|
retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Clear the FIFO buffers and disable them.
|
|
* (they will be reenabled in set_termios())
|
|
*/
|
|
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
|
|
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
|
|
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
|
|
serial_out(up, UART_FCR, 0);
|
|
|
|
/*
|
|
* Clear the interrupt registers.
|
|
*/
|
|
(void) serial_in(up, UART_LSR);
|
|
(void) serial_in(up, UART_RX);
|
|
(void) serial_in(up, UART_IIR);
|
|
(void) serial_in(up, UART_MSR);
|
|
|
|
/*
|
|
* Now, initialize the UART
|
|
*/
|
|
serial_out(up, UART_LCR, UART_LCR_WLEN8);
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
up->port.mctrl |= TIOCM_OUT2;
|
|
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
/*
|
|
* Finally, enable interrupts. Note: Modem status interrupts
|
|
* are set via set_termios(), which will be occurring imminently
|
|
* anyway, so we don't enable them here.
|
|
*/
|
|
up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
|
|
serial_out(up, UART_IER, up->ier);
|
|
|
|
/*
|
|
* And clear the interrupt registers again for luck.
|
|
*/
|
|
(void) serial_in(up, UART_LSR);
|
|
(void) serial_in(up, UART_RX);
|
|
(void) serial_in(up, UART_IIR);
|
|
(void) serial_in(up, UART_MSR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void serial_pxa_shutdown(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned long flags;
|
|
|
|
free_irq(up->port.irq, up);
|
|
|
|
/*
|
|
* Disable interrupts from this port
|
|
*/
|
|
up->ier = 0;
|
|
serial_out(up, UART_IER, 0);
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
up->port.mctrl &= ~TIOCM_OUT2;
|
|
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
/*
|
|
* Disable break condition and FIFOs
|
|
*/
|
|
serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
|
|
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
|
|
UART_FCR_CLEAR_RCVR |
|
|
UART_FCR_CLEAR_XMIT);
|
|
serial_out(up, UART_FCR, 0);
|
|
}
|
|
|
|
static void
|
|
serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
|
|
struct termios *old)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned char cval, fcr = 0;
|
|
unsigned long flags;
|
|
unsigned int baud, quot;
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
cval = UART_LCR_WLEN5;
|
|
break;
|
|
case CS6:
|
|
cval = UART_LCR_WLEN6;
|
|
break;
|
|
case CS7:
|
|
cval = UART_LCR_WLEN7;
|
|
break;
|
|
default:
|
|
case CS8:
|
|
cval = UART_LCR_WLEN8;
|
|
break;
|
|
}
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
cval |= UART_LCR_STOP;
|
|
if (termios->c_cflag & PARENB)
|
|
cval |= UART_LCR_PARITY;
|
|
if (!(termios->c_cflag & PARODD))
|
|
cval |= UART_LCR_EPAR;
|
|
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
if ((up->port.uartclk / quot) < (2400 * 16))
|
|
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
|
|
else if ((up->port.uartclk / quot) < (230400 * 16))
|
|
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
|
|
else
|
|
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
|
|
|
|
/*
|
|
* Ok, we're now changing the port state. Do it with
|
|
* interrupts disabled.
|
|
*/
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
/*
|
|
* Ensure the port will be enabled.
|
|
* This is required especially for serial console.
|
|
*/
|
|
up->ier |= IER_UUE;
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
|
|
if (termios->c_iflag & INPCK)
|
|
up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
up->port.read_status_mask |= UART_LSR_BI;
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
up->port.ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
|
|
if (termios->c_iflag & IGNBRK) {
|
|
up->port.ignore_status_mask |= UART_LSR_BI;
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
up->port.ignore_status_mask |= UART_LSR_OE;
|
|
}
|
|
|
|
/*
|
|
* ignore all characters if CREAD is not set
|
|
*/
|
|
if ((termios->c_cflag & CREAD) == 0)
|
|
up->port.ignore_status_mask |= UART_LSR_DR;
|
|
|
|
/*
|
|
* CTS flow control flag and modem status interrupts
|
|
*/
|
|
up->ier &= ~UART_IER_MSI;
|
|
if (UART_ENABLE_MS(&up->port, termios->c_cflag))
|
|
up->ier |= UART_IER_MSI;
|
|
|
|
serial_out(up, UART_IER, up->ier);
|
|
|
|
serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
|
|
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
|
|
serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
|
|
serial_out(up, UART_LCR, cval); /* reset DLAB */
|
|
up->lcr = cval; /* Save LCR */
|
|
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
|
|
serial_out(up, UART_FCR, fcr);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
static void
|
|
serial_pxa_pm(struct uart_port *port, unsigned int state,
|
|
unsigned int oldstate)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
pxa_set_cken(up->cken, !state);
|
|
if (!state)
|
|
udelay(1);
|
|
}
|
|
|
|
static void serial_pxa_release_port(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
static int serial_pxa_request_port(struct uart_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void serial_pxa_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
up->port.type = PORT_PXA;
|
|
}
|
|
|
|
static int
|
|
serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
/* we don't want the core code to modify any port params */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const char *
|
|
serial_pxa_type(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
return up->name;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_PXA_CONSOLE
|
|
|
|
static struct uart_pxa_port serial_pxa_ports[];
|
|
static struct uart_driver serial_pxa_reg;
|
|
|
|
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
|
|
|
|
/*
|
|
* Wait for transmitter & holding register to empty
|
|
*/
|
|
static inline void wait_for_xmitr(struct uart_pxa_port *up)
|
|
{
|
|
unsigned int status, tmout = 10000;
|
|
|
|
/* Wait up to 10ms for the character(s) to be sent. */
|
|
do {
|
|
status = serial_in(up, UART_LSR);
|
|
|
|
if (status & UART_LSR_BI)
|
|
up->lsr_break_flag = UART_LSR_BI;
|
|
|
|
if (--tmout == 0)
|
|
break;
|
|
udelay(1);
|
|
} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
|
|
|
|
/* Wait up to 1s for flow control if necessary */
|
|
if (up->port.flags & UPF_CONS_FLOW) {
|
|
tmout = 1000000;
|
|
while (--tmout &&
|
|
((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
|
|
udelay(1);
|
|
}
|
|
}
|
|
|
|
static void serial_pxa_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
wait_for_xmitr(up);
|
|
serial_out(up, UART_TX, ch);
|
|
}
|
|
|
|
/*
|
|
* Print a string to the serial port trying not to disturb
|
|
* any possible real use of the port...
|
|
*
|
|
* The console_lock must be held when we get here.
|
|
*/
|
|
static void
|
|
serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct uart_pxa_port *up = &serial_pxa_ports[co->index];
|
|
unsigned int ier;
|
|
|
|
/*
|
|
* First save the IER then disable the interrupts
|
|
*/
|
|
ier = serial_in(up, UART_IER);
|
|
serial_out(up, UART_IER, UART_IER_UUE);
|
|
|
|
uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore the IER
|
|
*/
|
|
wait_for_xmitr(up);
|
|
serial_out(up, UART_IER, ier);
|
|
}
|
|
|
|
static int __init
|
|
serial_pxa_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_pxa_port *up;
|
|
int baud = 9600;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
if (co->index == -1 || co->index >= serial_pxa_reg.nr)
|
|
co->index = 0;
|
|
up = &serial_pxa_ports[co->index];
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(&up->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct console serial_pxa_console = {
|
|
.name = "ttyS",
|
|
.write = serial_pxa_console_write,
|
|
.device = uart_console_device,
|
|
.setup = serial_pxa_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &serial_pxa_reg,
|
|
};
|
|
|
|
static int __init
|
|
serial_pxa_console_init(void)
|
|
{
|
|
register_console(&serial_pxa_console);
|
|
return 0;
|
|
}
|
|
|
|
console_initcall(serial_pxa_console_init);
|
|
|
|
#define PXA_CONSOLE &serial_pxa_console
|
|
#else
|
|
#define PXA_CONSOLE NULL
|
|
#endif
|
|
|
|
struct uart_ops serial_pxa_pops = {
|
|
.tx_empty = serial_pxa_tx_empty,
|
|
.set_mctrl = serial_pxa_set_mctrl,
|
|
.get_mctrl = serial_pxa_get_mctrl,
|
|
.stop_tx = serial_pxa_stop_tx,
|
|
.start_tx = serial_pxa_start_tx,
|
|
.stop_rx = serial_pxa_stop_rx,
|
|
.enable_ms = serial_pxa_enable_ms,
|
|
.break_ctl = serial_pxa_break_ctl,
|
|
.startup = serial_pxa_startup,
|
|
.shutdown = serial_pxa_shutdown,
|
|
.set_termios = serial_pxa_set_termios,
|
|
.pm = serial_pxa_pm,
|
|
.type = serial_pxa_type,
|
|
.release_port = serial_pxa_release_port,
|
|
.request_port = serial_pxa_request_port,
|
|
.config_port = serial_pxa_config_port,
|
|
.verify_port = serial_pxa_verify_port,
|
|
};
|
|
|
|
static struct uart_pxa_port serial_pxa_ports[] = {
|
|
{ /* FFUART */
|
|
.name = "FFUART",
|
|
.cken = CKEN6_FFUART,
|
|
.port = {
|
|
.type = PORT_PXA,
|
|
.iotype = UPIO_MEM,
|
|
.membase = (void *)&FFUART,
|
|
.mapbase = __PREG(FFUART),
|
|
.irq = IRQ_FFUART,
|
|
.uartclk = 921600 * 16,
|
|
.fifosize = 64,
|
|
.ops = &serial_pxa_pops,
|
|
.line = 0,
|
|
},
|
|
}, { /* BTUART */
|
|
.name = "BTUART",
|
|
.cken = CKEN7_BTUART,
|
|
.port = {
|
|
.type = PORT_PXA,
|
|
.iotype = UPIO_MEM,
|
|
.membase = (void *)&BTUART,
|
|
.mapbase = __PREG(BTUART),
|
|
.irq = IRQ_BTUART,
|
|
.uartclk = 921600 * 16,
|
|
.fifosize = 64,
|
|
.ops = &serial_pxa_pops,
|
|
.line = 1,
|
|
},
|
|
}, { /* STUART */
|
|
.name = "STUART",
|
|
.cken = CKEN5_STUART,
|
|
.port = {
|
|
.type = PORT_PXA,
|
|
.iotype = UPIO_MEM,
|
|
.membase = (void *)&STUART,
|
|
.mapbase = __PREG(STUART),
|
|
.irq = IRQ_STUART,
|
|
.uartclk = 921600 * 16,
|
|
.fifosize = 64,
|
|
.ops = &serial_pxa_pops,
|
|
.line = 2,
|
|
},
|
|
}, { /* HWUART */
|
|
.name = "HWUART",
|
|
.cken = CKEN4_HWUART,
|
|
.port = {
|
|
.type = PORT_PXA,
|
|
.iotype = UPIO_MEM,
|
|
.membase = (void *)&HWUART,
|
|
.mapbase = __PREG(HWUART),
|
|
.irq = IRQ_HWUART,
|
|
.uartclk = 921600 * 16,
|
|
.fifosize = 64,
|
|
.ops = &serial_pxa_pops,
|
|
.line = 3,
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct uart_driver serial_pxa_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "PXA serial",
|
|
.dev_name = "ttyS",
|
|
.major = TTY_MAJOR,
|
|
.minor = 64,
|
|
.nr = ARRAY_SIZE(serial_pxa_ports),
|
|
.cons = PXA_CONSOLE,
|
|
};
|
|
|
|
static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct uart_pxa_port *sport = platform_get_drvdata(dev);
|
|
|
|
if (sport)
|
|
uart_suspend_port(&serial_pxa_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_pxa_resume(struct platform_device *dev)
|
|
{
|
|
struct uart_pxa_port *sport = platform_get_drvdata(dev);
|
|
|
|
if (sport)
|
|
uart_resume_port(&serial_pxa_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_pxa_probe(struct platform_device *dev)
|
|
{
|
|
serial_pxa_ports[dev->id].port.dev = &dev->dev;
|
|
uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
|
|
platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
|
|
return 0;
|
|
}
|
|
|
|
static int serial_pxa_remove(struct platform_device *dev)
|
|
{
|
|
struct uart_pxa_port *sport = platform_get_drvdata(dev);
|
|
|
|
platform_set_drvdata(dev, NULL);
|
|
|
|
if (sport)
|
|
uart_remove_one_port(&serial_pxa_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver serial_pxa_driver = {
|
|
.probe = serial_pxa_probe,
|
|
.remove = serial_pxa_remove,
|
|
|
|
.suspend = serial_pxa_suspend,
|
|
.resume = serial_pxa_resume,
|
|
.driver = {
|
|
.name = "pxa2xx-uart",
|
|
},
|
|
};
|
|
|
|
int __init serial_pxa_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = uart_register_driver(&serial_pxa_reg);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
ret = platform_driver_register(&serial_pxa_driver);
|
|
if (ret != 0)
|
|
uart_unregister_driver(&serial_pxa_reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void __exit serial_pxa_exit(void)
|
|
{
|
|
platform_driver_unregister(&serial_pxa_driver);
|
|
uart_unregister_driver(&serial_pxa_reg);
|
|
}
|
|
|
|
module_init(serial_pxa_init);
|
|
module_exit(serial_pxa_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|