mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 21:35:20 +07:00
5f0632c467
This patch adds support to set the power line polarity for i.MX SoCs. To let the USB controller control the power it may be necessary to configure the polarity of the power line. So far the polarity was configured by Bootloader or alternatively the power line was muxed as gpio and driven by a regulator. Also make use of of_property_read_bool. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
611 lines
15 KiB
C
611 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
|
|
* on behalf of DENX Software Engineering GmbH
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/usb/chipidea.h>
|
|
#include <linux/usb/of.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
#include "ci.h"
|
|
#include "ci_hdrc_imx.h"
|
|
|
|
struct ci_hdrc_imx_platform_flag {
|
|
unsigned int flags;
|
|
};
|
|
|
|
static const struct ci_hdrc_imx_platform_flag imx23_usb_data = {
|
|
.flags = CI_HDRC_TURN_VBUS_EARLY_ON |
|
|
CI_HDRC_DISABLE_STREAMING,
|
|
};
|
|
|
|
static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
|
|
.flags = CI_HDRC_DISABLE_STREAMING,
|
|
};
|
|
|
|
static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
|
|
.flags = CI_HDRC_IMX28_WRITE_FIX |
|
|
CI_HDRC_TURN_VBUS_EARLY_ON |
|
|
CI_HDRC_DISABLE_STREAMING,
|
|
};
|
|
|
|
static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = {
|
|
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
|
|
CI_HDRC_TURN_VBUS_EARLY_ON |
|
|
CI_HDRC_DISABLE_STREAMING,
|
|
};
|
|
|
|
static const struct ci_hdrc_imx_platform_flag imx6sl_usb_data = {
|
|
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
|
|
CI_HDRC_TURN_VBUS_EARLY_ON |
|
|
CI_HDRC_DISABLE_HOST_STREAMING,
|
|
};
|
|
|
|
static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = {
|
|
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
|
|
CI_HDRC_TURN_VBUS_EARLY_ON |
|
|
CI_HDRC_DISABLE_HOST_STREAMING,
|
|
};
|
|
|
|
static const struct ci_hdrc_imx_platform_flag imx6ul_usb_data = {
|
|
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
|
|
CI_HDRC_TURN_VBUS_EARLY_ON,
|
|
};
|
|
|
|
static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
|
|
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
|
|
};
|
|
|
|
static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
|
|
{ .compatible = "fsl,imx23-usb", .data = &imx23_usb_data},
|
|
{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
|
|
{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
|
|
{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
|
|
{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
|
|
{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
|
|
{ .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data},
|
|
{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
|
|
|
|
struct ci_hdrc_imx_data {
|
|
struct usb_phy *phy;
|
|
struct platform_device *ci_pdev;
|
|
struct clk *clk;
|
|
struct imx_usbmisc_data *usbmisc_data;
|
|
bool supports_runtime_pm;
|
|
bool override_phy_control;
|
|
bool in_lpm;
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pinctrl_hsic_active;
|
|
struct regulator *hsic_pad_regulator;
|
|
/* SoC before i.mx6 (except imx23/imx28) needs three clks */
|
|
bool need_three_clks;
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_ahb;
|
|
struct clk *clk_per;
|
|
/* --------------------------------- */
|
|
};
|
|
|
|
/* Common functions shared by usbmisc drivers */
|
|
|
|
static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
|
|
{
|
|
struct platform_device *misc_pdev;
|
|
struct device_node *np = dev->of_node;
|
|
struct of_phandle_args args;
|
|
struct imx_usbmisc_data *data;
|
|
int ret;
|
|
|
|
/*
|
|
* In case the fsl,usbmisc property is not present this device doesn't
|
|
* need usbmisc. Return NULL (which is no error here)
|
|
*/
|
|
if (!of_get_property(np, "fsl,usbmisc", NULL))
|
|
return NULL;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
ret = of_parse_phandle_with_args(np, "fsl,usbmisc", "#index-cells",
|
|
0, &args);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to parse property fsl,usbmisc, errno %d\n",
|
|
ret);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
data->index = args.args[0];
|
|
|
|
misc_pdev = of_find_device_by_node(args.np);
|
|
of_node_put(args.np);
|
|
|
|
if (!misc_pdev || !platform_get_drvdata(misc_pdev))
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
|
|
data->dev = &misc_pdev->dev;
|
|
|
|
/*
|
|
* Check the various over current related properties. If over current
|
|
* detection is disabled we're not interested in the polarity.
|
|
*/
|
|
if (of_find_property(np, "disable-over-current", NULL)) {
|
|
data->disable_oc = 1;
|
|
} else if (of_find_property(np, "over-current-active-high", NULL)) {
|
|
data->oc_pol_active_low = 0;
|
|
data->oc_pol_configured = 1;
|
|
} else if (of_find_property(np, "over-current-active-low", NULL)) {
|
|
data->oc_pol_active_low = 1;
|
|
data->oc_pol_configured = 1;
|
|
} else {
|
|
dev_warn(dev, "No over current polarity defined\n");
|
|
}
|
|
|
|
data->pwr_pol = of_property_read_bool(np, "power-active-high");
|
|
data->evdo = of_property_read_bool(np, "external-vbus-divider");
|
|
|
|
if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
|
|
data->ulpi = 1;
|
|
|
|
return data;
|
|
}
|
|
|
|
/* End of common functions shared by usbmisc drivers*/
|
|
static int imx_get_clks(struct device *dev)
|
|
{
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
data->clk_ipg = devm_clk_get(dev, "ipg");
|
|
if (IS_ERR(data->clk_ipg)) {
|
|
/* If the platform only needs one clocks */
|
|
data->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(data->clk)) {
|
|
ret = PTR_ERR(data->clk);
|
|
dev_err(dev,
|
|
"Failed to get clks, err=%ld,%ld\n",
|
|
PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
|
|
return ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
data->clk_ahb = devm_clk_get(dev, "ahb");
|
|
if (IS_ERR(data->clk_ahb)) {
|
|
ret = PTR_ERR(data->clk_ahb);
|
|
dev_err(dev,
|
|
"Failed to get ahb clock, err=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
data->clk_per = devm_clk_get(dev, "per");
|
|
if (IS_ERR(data->clk_per)) {
|
|
ret = PTR_ERR(data->clk_per);
|
|
dev_err(dev,
|
|
"Failed to get per clock, err=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
data->need_three_clks = true;
|
|
return ret;
|
|
}
|
|
|
|
static int imx_prepare_enable_clks(struct device *dev)
|
|
{
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
if (data->need_three_clks) {
|
|
ret = clk_prepare_enable(data->clk_ipg);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Failed to prepare/enable ipg clk, err=%d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(data->clk_ahb);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Failed to prepare/enable ahb clk, err=%d\n",
|
|
ret);
|
|
clk_disable_unprepare(data->clk_ipg);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(data->clk_per);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Failed to prepare/enable per clk, err=%d\n",
|
|
ret);
|
|
clk_disable_unprepare(data->clk_ahb);
|
|
clk_disable_unprepare(data->clk_ipg);
|
|
return ret;
|
|
}
|
|
} else {
|
|
ret = clk_prepare_enable(data->clk);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Failed to prepare/enable clk, err=%d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx_disable_unprepare_clks(struct device *dev)
|
|
{
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
|
|
if (data->need_three_clks) {
|
|
clk_disable_unprepare(data->clk_per);
|
|
clk_disable_unprepare(data->clk_ahb);
|
|
clk_disable_unprepare(data->clk_ipg);
|
|
} else {
|
|
clk_disable_unprepare(data->clk);
|
|
}
|
|
}
|
|
|
|
static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event)
|
|
{
|
|
struct device *dev = ci->dev->parent;
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
switch (event) {
|
|
case CI_HDRC_IMX_HSIC_ACTIVE_EVENT:
|
|
ret = pinctrl_select_state(data->pinctrl,
|
|
data->pinctrl_hsic_active);
|
|
if (ret)
|
|
dev_err(dev, "hsic_active select failed, err=%d\n",
|
|
ret);
|
|
break;
|
|
case CI_HDRC_IMX_HSIC_SUSPEND_EVENT:
|
|
ret = imx_usbmisc_hsic_set_connect(data->usbmisc_data);
|
|
if (ret)
|
|
dev_err(dev,
|
|
"hsic_set_connect failed, err=%d\n", ret);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ci_hdrc_imx_probe(struct platform_device *pdev)
|
|
{
|
|
struct ci_hdrc_imx_data *data;
|
|
struct ci_hdrc_platform_data pdata = {
|
|
.name = dev_name(&pdev->dev),
|
|
.capoffset = DEF_CAPOFFSET,
|
|
.notify_event = ci_hdrc_imx_notify_event,
|
|
};
|
|
int ret;
|
|
const struct of_device_id *of_id;
|
|
const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct pinctrl_state *pinctrl_hsic_idle;
|
|
|
|
of_id = of_match_device(ci_hdrc_imx_dt_ids, dev);
|
|
if (!of_id)
|
|
return -ENODEV;
|
|
|
|
imx_platform_flag = of_id->data;
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
data->usbmisc_data = usbmisc_get_init_data(dev);
|
|
if (IS_ERR(data->usbmisc_data))
|
|
return PTR_ERR(data->usbmisc_data);
|
|
|
|
if ((of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC)
|
|
&& data->usbmisc_data) {
|
|
pdata.flags |= CI_HDRC_IMX_IS_HSIC;
|
|
data->usbmisc_data->hsic = 1;
|
|
data->pinctrl = devm_pinctrl_get(dev);
|
|
if (IS_ERR(data->pinctrl)) {
|
|
dev_err(dev, "pinctrl get failed, err=%ld\n",
|
|
PTR_ERR(data->pinctrl));
|
|
return PTR_ERR(data->pinctrl);
|
|
}
|
|
|
|
pinctrl_hsic_idle = pinctrl_lookup_state(data->pinctrl, "idle");
|
|
if (IS_ERR(pinctrl_hsic_idle)) {
|
|
dev_err(dev,
|
|
"pinctrl_hsic_idle lookup failed, err=%ld\n",
|
|
PTR_ERR(pinctrl_hsic_idle));
|
|
return PTR_ERR(pinctrl_hsic_idle);
|
|
}
|
|
|
|
ret = pinctrl_select_state(data->pinctrl, pinctrl_hsic_idle);
|
|
if (ret) {
|
|
dev_err(dev, "hsic_idle select failed, err=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
data->pinctrl_hsic_active = pinctrl_lookup_state(data->pinctrl,
|
|
"active");
|
|
if (IS_ERR(data->pinctrl_hsic_active)) {
|
|
dev_err(dev,
|
|
"pinctrl_hsic_active lookup failed, err=%ld\n",
|
|
PTR_ERR(data->pinctrl_hsic_active));
|
|
return PTR_ERR(data->pinctrl_hsic_active);
|
|
}
|
|
|
|
data->hsic_pad_regulator = devm_regulator_get(dev, "hsic");
|
|
if (PTR_ERR(data->hsic_pad_regulator) == -EPROBE_DEFER) {
|
|
return -EPROBE_DEFER;
|
|
} else if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) {
|
|
/* no pad regualator is needed */
|
|
data->hsic_pad_regulator = NULL;
|
|
} else if (IS_ERR(data->hsic_pad_regulator)) {
|
|
dev_err(dev, "Get HSIC pad regulator error: %ld\n",
|
|
PTR_ERR(data->hsic_pad_regulator));
|
|
return PTR_ERR(data->hsic_pad_regulator);
|
|
}
|
|
|
|
if (data->hsic_pad_regulator) {
|
|
ret = regulator_enable(data->hsic_pad_regulator);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Failed to enable HSIC pad regulator\n");
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
ret = imx_get_clks(dev);
|
|
if (ret)
|
|
goto disable_hsic_regulator;
|
|
|
|
ret = imx_prepare_enable_clks(dev);
|
|
if (ret)
|
|
goto disable_hsic_regulator;
|
|
|
|
data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
|
|
if (IS_ERR(data->phy)) {
|
|
ret = PTR_ERR(data->phy);
|
|
/* Return -EINVAL if no usbphy is available */
|
|
if (ret == -ENODEV)
|
|
ret = -EINVAL;
|
|
goto err_clk;
|
|
}
|
|
|
|
pdata.usb_phy = data->phy;
|
|
|
|
if ((of_device_is_compatible(np, "fsl,imx53-usb") ||
|
|
of_device_is_compatible(np, "fsl,imx51-usb")) && pdata.usb_phy &&
|
|
of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) {
|
|
pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL;
|
|
data->override_phy_control = true;
|
|
usb_phy_init(pdata.usb_phy);
|
|
}
|
|
|
|
pdata.flags |= imx_platform_flag->flags;
|
|
if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
|
|
data->supports_runtime_pm = true;
|
|
|
|
ret = imx_usbmisc_init(data->usbmisc_data);
|
|
if (ret) {
|
|
dev_err(dev, "usbmisc init failed, ret=%d\n", ret);
|
|
goto err_clk;
|
|
}
|
|
|
|
data->ci_pdev = ci_hdrc_add_device(dev,
|
|
pdev->resource, pdev->num_resources,
|
|
&pdata);
|
|
if (IS_ERR(data->ci_pdev)) {
|
|
ret = PTR_ERR(data->ci_pdev);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "ci_hdrc_add_device failed, err=%d\n",
|
|
ret);
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = imx_usbmisc_init_post(data->usbmisc_data);
|
|
if (ret) {
|
|
dev_err(dev, "usbmisc post failed, ret=%d\n", ret);
|
|
goto disable_device;
|
|
}
|
|
|
|
if (data->supports_runtime_pm) {
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
}
|
|
|
|
device_set_wakeup_capable(dev, true);
|
|
|
|
return 0;
|
|
|
|
disable_device:
|
|
ci_hdrc_remove_device(data->ci_pdev);
|
|
err_clk:
|
|
imx_disable_unprepare_clks(dev);
|
|
disable_hsic_regulator:
|
|
if (data->hsic_pad_regulator)
|
|
ret = regulator_disable(data->hsic_pad_regulator);
|
|
return ret;
|
|
}
|
|
|
|
static int ci_hdrc_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev);
|
|
|
|
if (data->supports_runtime_pm) {
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
}
|
|
ci_hdrc_remove_device(data->ci_pdev);
|
|
if (data->override_phy_control)
|
|
usb_phy_shutdown(data->phy);
|
|
imx_disable_unprepare_clks(&pdev->dev);
|
|
if (data->hsic_pad_regulator)
|
|
regulator_disable(data->hsic_pad_regulator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ci_hdrc_imx_shutdown(struct platform_device *pdev)
|
|
{
|
|
ci_hdrc_imx_remove(pdev);
|
|
}
|
|
|
|
static int __maybe_unused imx_controller_suspend(struct device *dev)
|
|
{
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
dev_dbg(dev, "at %s\n", __func__);
|
|
|
|
ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, false);
|
|
if (ret) {
|
|
dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
imx_disable_unprepare_clks(dev);
|
|
data->in_lpm = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx_controller_resume(struct device *dev)
|
|
{
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
dev_dbg(dev, "at %s\n", __func__);
|
|
|
|
if (!data->in_lpm) {
|
|
WARN_ON(1);
|
|
return 0;
|
|
}
|
|
|
|
ret = imx_prepare_enable_clks(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data->in_lpm = false;
|
|
|
|
ret = imx_usbmisc_set_wakeup(data->usbmisc_data, false);
|
|
if (ret) {
|
|
dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
|
|
goto clk_disable;
|
|
}
|
|
|
|
ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, true);
|
|
if (ret) {
|
|
dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret);
|
|
goto hsic_set_clk_fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
hsic_set_clk_fail:
|
|
imx_usbmisc_set_wakeup(data->usbmisc_data, true);
|
|
clk_disable:
|
|
imx_disable_unprepare_clks(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused ci_hdrc_imx_suspend(struct device *dev)
|
|
{
|
|
int ret;
|
|
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
|
|
if (data->in_lpm)
|
|
/* The core's suspend doesn't run */
|
|
return 0;
|
|
|
|
if (device_may_wakeup(dev)) {
|
|
ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
|
|
if (ret) {
|
|
dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return imx_controller_suspend(dev);
|
|
}
|
|
|
|
static int __maybe_unused ci_hdrc_imx_resume(struct device *dev)
|
|
{
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = imx_controller_resume(dev);
|
|
if (!ret && data->supports_runtime_pm) {
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused ci_hdrc_imx_runtime_suspend(struct device *dev)
|
|
{
|
|
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
if (data->in_lpm) {
|
|
WARN_ON(1);
|
|
return 0;
|
|
}
|
|
|
|
ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
|
|
if (ret) {
|
|
dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return imx_controller_suspend(dev);
|
|
}
|
|
|
|
static int __maybe_unused ci_hdrc_imx_runtime_resume(struct device *dev)
|
|
{
|
|
return imx_controller_resume(dev);
|
|
}
|
|
|
|
static const struct dev_pm_ops ci_hdrc_imx_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(ci_hdrc_imx_suspend, ci_hdrc_imx_resume)
|
|
SET_RUNTIME_PM_OPS(ci_hdrc_imx_runtime_suspend,
|
|
ci_hdrc_imx_runtime_resume, NULL)
|
|
};
|
|
static struct platform_driver ci_hdrc_imx_driver = {
|
|
.probe = ci_hdrc_imx_probe,
|
|
.remove = ci_hdrc_imx_remove,
|
|
.shutdown = ci_hdrc_imx_shutdown,
|
|
.driver = {
|
|
.name = "imx_usb",
|
|
.of_match_table = ci_hdrc_imx_dt_ids,
|
|
.pm = &ci_hdrc_imx_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(ci_hdrc_imx_driver);
|
|
|
|
MODULE_ALIAS("platform:imx-usb");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("CI HDRC i.MX USB binding");
|
|
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
|
|
MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
|