mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-04 06:36:42 +07:00
74d0f3338f
Old debugging hack sneaked back during x86 merge, this removes it. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
308 lines
6.3 KiB
ArmAsm
308 lines
6.3 KiB
ArmAsm
.text
|
|
#include <linux/linkage.h>
|
|
#include <asm/segment.h>
|
|
#include <asm/page.h>
|
|
|
|
#
|
|
# wakeup_code runs in real mode, and at unknown address (determined at run-time).
|
|
# Therefore it must only use relative jumps/calls.
|
|
#
|
|
# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
|
|
#
|
|
# If physical address of wakeup_code is 0x12345, BIOS should call us with
|
|
# cs = 0x1234, eip = 0x05
|
|
#
|
|
|
|
#define BEEP \
|
|
inb $97, %al; \
|
|
outb %al, $0x80; \
|
|
movb $3, %al; \
|
|
outb %al, $97; \
|
|
outb %al, $0x80; \
|
|
movb $-74, %al; \
|
|
outb %al, $67; \
|
|
outb %al, $0x80; \
|
|
movb $-119, %al; \
|
|
outb %al, $66; \
|
|
outb %al, $0x80; \
|
|
movb $15, %al; \
|
|
outb %al, $66;
|
|
|
|
ALIGN
|
|
.align 4096
|
|
ENTRY(wakeup_start)
|
|
wakeup_code:
|
|
wakeup_code_start = .
|
|
.code16
|
|
|
|
cli
|
|
cld
|
|
|
|
# setup data segment
|
|
movw %cs, %ax
|
|
movw %ax, %ds # Make ds:0 point to wakeup_start
|
|
movw %ax, %ss
|
|
|
|
testl $4, realmode_flags - wakeup_code
|
|
jz 1f
|
|
BEEP
|
|
1:
|
|
mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board
|
|
|
|
pushl $0 # Kill any dangerous flags
|
|
popfl
|
|
|
|
movl real_magic - wakeup_code, %eax
|
|
cmpl $0x12345678, %eax
|
|
jne bogus_real_magic
|
|
|
|
testl $1, realmode_flags - wakeup_code
|
|
jz 1f
|
|
lcall $0xc000,$3
|
|
movw %cs, %ax
|
|
movw %ax, %ds # Bios might have played with that
|
|
movw %ax, %ss
|
|
1:
|
|
|
|
testl $2, realmode_flags - wakeup_code
|
|
jz 1f
|
|
mov video_mode - wakeup_code, %ax
|
|
call mode_set
|
|
1:
|
|
|
|
# set up page table
|
|
movl $swsusp_pg_dir-__PAGE_OFFSET, %eax
|
|
movl %eax, %cr3
|
|
|
|
testl $1, real_efer_save_restore - wakeup_code
|
|
jz 4f
|
|
# restore efer setting
|
|
movl real_save_efer_edx - wakeup_code, %edx
|
|
movl real_save_efer_eax - wakeup_code, %eax
|
|
mov $0xc0000080, %ecx
|
|
wrmsr
|
|
4:
|
|
# make sure %cr4 is set correctly (features, etc)
|
|
movl real_save_cr4 - wakeup_code, %eax
|
|
movl %eax, %cr4
|
|
|
|
# need a gdt -- use lgdtl to force 32-bit operands, in case
|
|
# the GDT is located past 16 megabytes.
|
|
lgdtl real_save_gdt - wakeup_code
|
|
|
|
movl real_save_cr0 - wakeup_code, %eax
|
|
movl %eax, %cr0
|
|
jmp 1f
|
|
1:
|
|
movl real_magic - wakeup_code, %eax
|
|
cmpl $0x12345678, %eax
|
|
jne bogus_real_magic
|
|
|
|
testl $8, realmode_flags - wakeup_code
|
|
jz 1f
|
|
BEEP
|
|
1:
|
|
ljmpl $__KERNEL_CS, $wakeup_pmode_return
|
|
|
|
real_save_gdt: .word 0
|
|
.long 0
|
|
real_save_cr0: .long 0
|
|
real_save_cr3: .long 0
|
|
real_save_cr4: .long 0
|
|
real_magic: .long 0
|
|
video_mode: .long 0
|
|
realmode_flags: .long 0
|
|
real_efer_save_restore: .long 0
|
|
real_save_efer_edx: .long 0
|
|
real_save_efer_eax: .long 0
|
|
|
|
bogus_real_magic:
|
|
jmp bogus_real_magic
|
|
|
|
/* This code uses an extended set of video mode numbers. These include:
|
|
* Aliases for standard modes
|
|
* NORMAL_VGA (-1)
|
|
* EXTENDED_VGA (-2)
|
|
* ASK_VGA (-3)
|
|
* Video modes numbered by menu position -- NOT RECOMMENDED because of lack
|
|
* of compatibility when extending the table. These are between 0x00 and 0xff.
|
|
*/
|
|
#define VIDEO_FIRST_MENU 0x0000
|
|
|
|
/* Standard BIOS video modes (BIOS number + 0x0100) */
|
|
#define VIDEO_FIRST_BIOS 0x0100
|
|
|
|
/* VESA BIOS video modes (VESA number + 0x0200) */
|
|
#define VIDEO_FIRST_VESA 0x0200
|
|
|
|
/* Video7 special modes (BIOS number + 0x0900) */
|
|
#define VIDEO_FIRST_V7 0x0900
|
|
|
|
# Setting of user mode (AX=mode ID) => CF=success
|
|
|
|
# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
|
|
# modes, we should probably compile in the video code from the boot
|
|
# directory.
|
|
mode_set:
|
|
movw %ax, %bx
|
|
subb $VIDEO_FIRST_VESA>>8, %bh
|
|
cmpb $2, %bh
|
|
jb check_vesa
|
|
|
|
setbad:
|
|
clc
|
|
ret
|
|
|
|
check_vesa:
|
|
orw $0x4000, %bx # Use linear frame buffer
|
|
movw $0x4f02, %ax # VESA BIOS mode set call
|
|
int $0x10
|
|
cmpw $0x004f, %ax # AL=4f if implemented
|
|
jnz setbad # AH=0 if OK
|
|
|
|
stc
|
|
ret
|
|
|
|
.code32
|
|
ALIGN
|
|
|
|
.org 0x800
|
|
wakeup_stack_begin: # Stack grows down
|
|
|
|
.org 0xff0 # Just below end of page
|
|
wakeup_stack:
|
|
ENTRY(wakeup_end)
|
|
|
|
.org 0x1000
|
|
|
|
wakeup_pmode_return:
|
|
movw $__KERNEL_DS, %ax
|
|
movw %ax, %ss
|
|
movw %ax, %ds
|
|
movw %ax, %es
|
|
movw %ax, %fs
|
|
movw %ax, %gs
|
|
|
|
# reload the gdt, as we need the full 32 bit address
|
|
lgdt saved_gdt
|
|
lidt saved_idt
|
|
lldt saved_ldt
|
|
ljmp $(__KERNEL_CS),$1f
|
|
1:
|
|
movl %cr3, %eax
|
|
movl %eax, %cr3
|
|
wbinvd
|
|
|
|
# and restore the stack ... but you need gdt for this to work
|
|
movl saved_context_esp, %esp
|
|
|
|
movl %cs:saved_magic, %eax
|
|
cmpl $0x12345678, %eax
|
|
jne bogus_magic
|
|
|
|
# jump to place where we left off
|
|
movl saved_eip,%eax
|
|
jmp *%eax
|
|
|
|
bogus_magic:
|
|
jmp bogus_magic
|
|
|
|
|
|
##
|
|
# acpi_copy_wakeup_routine
|
|
#
|
|
# Copy the above routine to low memory.
|
|
#
|
|
# Parameters:
|
|
# %eax: place to copy wakeup routine to
|
|
#
|
|
# Returned address is location of code in low memory (past data and stack)
|
|
#
|
|
ENTRY(acpi_copy_wakeup_routine)
|
|
|
|
pushl %ebx
|
|
sgdt saved_gdt
|
|
sidt saved_idt
|
|
sldt saved_ldt
|
|
str saved_tss
|
|
|
|
movl nx_enabled, %edx
|
|
movl %edx, real_efer_save_restore - wakeup_start (%eax)
|
|
testl $1, real_efer_save_restore - wakeup_start (%eax)
|
|
jz 2f
|
|
# save efer setting
|
|
pushl %eax
|
|
movl %eax, %ebx
|
|
mov $0xc0000080, %ecx
|
|
rdmsr
|
|
movl %edx, real_save_efer_edx - wakeup_start (%ebx)
|
|
movl %eax, real_save_efer_eax - wakeup_start (%ebx)
|
|
popl %eax
|
|
2:
|
|
|
|
movl %cr3, %edx
|
|
movl %edx, real_save_cr3 - wakeup_start (%eax)
|
|
movl %cr4, %edx
|
|
movl %edx, real_save_cr4 - wakeup_start (%eax)
|
|
movl %cr0, %edx
|
|
movl %edx, real_save_cr0 - wakeup_start (%eax)
|
|
sgdt real_save_gdt - wakeup_start (%eax)
|
|
|
|
movl saved_videomode, %edx
|
|
movl %edx, video_mode - wakeup_start (%eax)
|
|
movl acpi_realmode_flags, %edx
|
|
movl %edx, realmode_flags - wakeup_start (%eax)
|
|
movl $0x12345678, real_magic - wakeup_start (%eax)
|
|
movl $0x12345678, saved_magic
|
|
popl %ebx
|
|
ret
|
|
|
|
save_registers:
|
|
leal 4(%esp), %eax
|
|
movl %eax, saved_context_esp
|
|
movl %ebx, saved_context_ebx
|
|
movl %ebp, saved_context_ebp
|
|
movl %esi, saved_context_esi
|
|
movl %edi, saved_context_edi
|
|
pushfl ; popl saved_context_eflags
|
|
|
|
movl $ret_point, saved_eip
|
|
ret
|
|
|
|
|
|
restore_registers:
|
|
movl saved_context_ebp, %ebp
|
|
movl saved_context_ebx, %ebx
|
|
movl saved_context_esi, %esi
|
|
movl saved_context_edi, %edi
|
|
pushl saved_context_eflags ; popfl
|
|
ret
|
|
|
|
ENTRY(do_suspend_lowlevel)
|
|
call save_processor_state
|
|
call save_registers
|
|
pushl $3
|
|
call acpi_enter_sleep_state
|
|
addl $4, %esp
|
|
|
|
# In case of S3 failure, we'll emerge here. Jump
|
|
# to ret_point to recover
|
|
jmp ret_point
|
|
.p2align 4,,7
|
|
ret_point:
|
|
call restore_registers
|
|
call restore_processor_state
|
|
ret
|
|
|
|
.data
|
|
ALIGN
|
|
ENTRY(saved_magic) .long 0
|
|
ENTRY(saved_eip) .long 0
|
|
|
|
# saved registers
|
|
saved_gdt: .long 0,0
|
|
saved_idt: .long 0,0
|
|
saved_ldt: .long 0
|
|
saved_tss: .long 0
|
|
|