mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 03:14:42 +07:00
6e0832fa43
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
429 lines
12 KiB
C
429 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* pci-rcar-gen2: internal PCI bus support
|
|
*
|
|
* Copyright (C) 2013 Renesas Solutions Corp.
|
|
* Copyright (C) 2013 Cogent Embedded, Inc.
|
|
*
|
|
* Author: Valentine Barshak <valentine.barshak@cogentembedded.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "../pci.h"
|
|
|
|
/* AHB-PCI Bridge PCI communication registers */
|
|
#define RCAR_AHBPCI_PCICOM_OFFSET 0x800
|
|
|
|
#define RCAR_PCIAHB_WIN1_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x00)
|
|
#define RCAR_PCIAHB_WIN2_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x04)
|
|
#define RCAR_PCIAHB_PREFETCH0 0x0
|
|
#define RCAR_PCIAHB_PREFETCH4 0x1
|
|
#define RCAR_PCIAHB_PREFETCH8 0x2
|
|
#define RCAR_PCIAHB_PREFETCH16 0x3
|
|
|
|
#define RCAR_AHBPCI_WIN1_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x10)
|
|
#define RCAR_AHBPCI_WIN2_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x14)
|
|
#define RCAR_AHBPCI_WIN_CTR_MEM (3 << 1)
|
|
#define RCAR_AHBPCI_WIN_CTR_CFG (5 << 1)
|
|
#define RCAR_AHBPCI_WIN1_HOST (1 << 30)
|
|
#define RCAR_AHBPCI_WIN1_DEVICE (1 << 31)
|
|
|
|
#define RCAR_PCI_INT_ENABLE_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x20)
|
|
#define RCAR_PCI_INT_STATUS_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x24)
|
|
#define RCAR_PCI_INT_SIGTABORT (1 << 0)
|
|
#define RCAR_PCI_INT_SIGRETABORT (1 << 1)
|
|
#define RCAR_PCI_INT_REMABORT (1 << 2)
|
|
#define RCAR_PCI_INT_PERR (1 << 3)
|
|
#define RCAR_PCI_INT_SIGSERR (1 << 4)
|
|
#define RCAR_PCI_INT_RESERR (1 << 5)
|
|
#define RCAR_PCI_INT_WIN1ERR (1 << 12)
|
|
#define RCAR_PCI_INT_WIN2ERR (1 << 13)
|
|
#define RCAR_PCI_INT_A (1 << 16)
|
|
#define RCAR_PCI_INT_B (1 << 17)
|
|
#define RCAR_PCI_INT_PME (1 << 19)
|
|
#define RCAR_PCI_INT_ALLERRORS (RCAR_PCI_INT_SIGTABORT | \
|
|
RCAR_PCI_INT_SIGRETABORT | \
|
|
RCAR_PCI_INT_REMABORT | \
|
|
RCAR_PCI_INT_PERR | \
|
|
RCAR_PCI_INT_SIGSERR | \
|
|
RCAR_PCI_INT_RESERR | \
|
|
RCAR_PCI_INT_WIN1ERR | \
|
|
RCAR_PCI_INT_WIN2ERR)
|
|
|
|
#define RCAR_AHB_BUS_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x30)
|
|
#define RCAR_AHB_BUS_MMODE_HTRANS (1 << 0)
|
|
#define RCAR_AHB_BUS_MMODE_BYTE_BURST (1 << 1)
|
|
#define RCAR_AHB_BUS_MMODE_WR_INCR (1 << 2)
|
|
#define RCAR_AHB_BUS_MMODE_HBUS_REQ (1 << 7)
|
|
#define RCAR_AHB_BUS_SMODE_READYCTR (1 << 17)
|
|
#define RCAR_AHB_BUS_MODE (RCAR_AHB_BUS_MMODE_HTRANS | \
|
|
RCAR_AHB_BUS_MMODE_BYTE_BURST | \
|
|
RCAR_AHB_BUS_MMODE_WR_INCR | \
|
|
RCAR_AHB_BUS_MMODE_HBUS_REQ | \
|
|
RCAR_AHB_BUS_SMODE_READYCTR)
|
|
|
|
#define RCAR_USBCTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x34)
|
|
#define RCAR_USBCTR_USBH_RST (1 << 0)
|
|
#define RCAR_USBCTR_PCICLK_MASK (1 << 1)
|
|
#define RCAR_USBCTR_PLL_RST (1 << 2)
|
|
#define RCAR_USBCTR_DIRPD (1 << 8)
|
|
#define RCAR_USBCTR_PCIAHB_WIN2_EN (1 << 9)
|
|
#define RCAR_USBCTR_PCIAHB_WIN1_256M (0 << 10)
|
|
#define RCAR_USBCTR_PCIAHB_WIN1_512M (1 << 10)
|
|
#define RCAR_USBCTR_PCIAHB_WIN1_1G (2 << 10)
|
|
#define RCAR_USBCTR_PCIAHB_WIN1_2G (3 << 10)
|
|
#define RCAR_USBCTR_PCIAHB_WIN1_MASK (3 << 10)
|
|
|
|
#define RCAR_PCI_ARBITER_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x40)
|
|
#define RCAR_PCI_ARBITER_PCIREQ0 (1 << 0)
|
|
#define RCAR_PCI_ARBITER_PCIREQ1 (1 << 1)
|
|
#define RCAR_PCI_ARBITER_PCIBP_MODE (1 << 12)
|
|
|
|
#define RCAR_PCI_UNIT_REV_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x48)
|
|
|
|
struct rcar_pci_priv {
|
|
struct device *dev;
|
|
void __iomem *reg;
|
|
struct resource mem_res;
|
|
struct resource *cfg_res;
|
|
unsigned busnr;
|
|
int irq;
|
|
unsigned long window_size;
|
|
unsigned long window_addr;
|
|
unsigned long window_pci;
|
|
};
|
|
|
|
/* PCI configuration space operations */
|
|
static void __iomem *rcar_pci_cfg_base(struct pci_bus *bus, unsigned int devfn,
|
|
int where)
|
|
{
|
|
struct pci_sys_data *sys = bus->sysdata;
|
|
struct rcar_pci_priv *priv = sys->private_data;
|
|
int slot, val;
|
|
|
|
if (sys->busnr != bus->number || PCI_FUNC(devfn))
|
|
return NULL;
|
|
|
|
/* Only one EHCI/OHCI device built-in */
|
|
slot = PCI_SLOT(devfn);
|
|
if (slot > 2)
|
|
return NULL;
|
|
|
|
/* bridge logic only has registers to 0x40 */
|
|
if (slot == 0x0 && where >= 0x40)
|
|
return NULL;
|
|
|
|
val = slot ? RCAR_AHBPCI_WIN1_DEVICE | RCAR_AHBPCI_WIN_CTR_CFG :
|
|
RCAR_AHBPCI_WIN1_HOST | RCAR_AHBPCI_WIN_CTR_CFG;
|
|
|
|
iowrite32(val, priv->reg + RCAR_AHBPCI_WIN1_CTR_REG);
|
|
return priv->reg + (slot >> 1) * 0x100 + where;
|
|
}
|
|
|
|
/* PCI interrupt mapping */
|
|
static int rcar_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
struct pci_sys_data *sys = dev->bus->sysdata;
|
|
struct rcar_pci_priv *priv = sys->private_data;
|
|
int irq;
|
|
|
|
irq = of_irq_parse_and_map_pci(dev, slot, pin);
|
|
if (!irq)
|
|
irq = priv->irq;
|
|
|
|
return irq;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_DEBUG
|
|
/* if debug enabled, then attach an error handler irq to the bridge */
|
|
|
|
static irqreturn_t rcar_pci_err_irq(int irq, void *pw)
|
|
{
|
|
struct rcar_pci_priv *priv = pw;
|
|
struct device *dev = priv->dev;
|
|
u32 status = ioread32(priv->reg + RCAR_PCI_INT_STATUS_REG);
|
|
|
|
if (status & RCAR_PCI_INT_ALLERRORS) {
|
|
dev_err(dev, "error irq: status %08x\n", status);
|
|
|
|
/* clear the error(s) */
|
|
iowrite32(status & RCAR_PCI_INT_ALLERRORS,
|
|
priv->reg + RCAR_PCI_INT_STATUS_REG);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static void rcar_pci_setup_errirq(struct rcar_pci_priv *priv)
|
|
{
|
|
struct device *dev = priv->dev;
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = devm_request_irq(dev, priv->irq, rcar_pci_err_irq,
|
|
IRQF_SHARED, "error irq", priv);
|
|
if (ret) {
|
|
dev_err(dev, "cannot claim IRQ for error handling\n");
|
|
return;
|
|
}
|
|
|
|
val = ioread32(priv->reg + RCAR_PCI_INT_ENABLE_REG);
|
|
val |= RCAR_PCI_INT_ALLERRORS;
|
|
iowrite32(val, priv->reg + RCAR_PCI_INT_ENABLE_REG);
|
|
}
|
|
#else
|
|
static inline void rcar_pci_setup_errirq(struct rcar_pci_priv *priv) { }
|
|
#endif
|
|
|
|
/* PCI host controller setup */
|
|
static int rcar_pci_setup(int nr, struct pci_sys_data *sys)
|
|
{
|
|
struct rcar_pci_priv *priv = sys->private_data;
|
|
struct device *dev = priv->dev;
|
|
void __iomem *reg = priv->reg;
|
|
u32 val;
|
|
int ret;
|
|
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_get_sync(dev);
|
|
|
|
val = ioread32(reg + RCAR_PCI_UNIT_REV_REG);
|
|
dev_info(dev, "PCI: bus%u revision %x\n", sys->busnr, val);
|
|
|
|
/* Disable Direct Power Down State and assert reset */
|
|
val = ioread32(reg + RCAR_USBCTR_REG) & ~RCAR_USBCTR_DIRPD;
|
|
val |= RCAR_USBCTR_USBH_RST | RCAR_USBCTR_PLL_RST;
|
|
iowrite32(val, reg + RCAR_USBCTR_REG);
|
|
udelay(4);
|
|
|
|
/* De-assert reset and reset PCIAHB window1 size */
|
|
val &= ~(RCAR_USBCTR_PCIAHB_WIN1_MASK | RCAR_USBCTR_PCICLK_MASK |
|
|
RCAR_USBCTR_USBH_RST | RCAR_USBCTR_PLL_RST);
|
|
|
|
/* Setup PCIAHB window1 size */
|
|
switch (priv->window_size) {
|
|
case SZ_2G:
|
|
val |= RCAR_USBCTR_PCIAHB_WIN1_2G;
|
|
break;
|
|
case SZ_1G:
|
|
val |= RCAR_USBCTR_PCIAHB_WIN1_1G;
|
|
break;
|
|
case SZ_512M:
|
|
val |= RCAR_USBCTR_PCIAHB_WIN1_512M;
|
|
break;
|
|
default:
|
|
pr_warn("unknown window size %ld - defaulting to 256M\n",
|
|
priv->window_size);
|
|
priv->window_size = SZ_256M;
|
|
/* fall-through */
|
|
case SZ_256M:
|
|
val |= RCAR_USBCTR_PCIAHB_WIN1_256M;
|
|
break;
|
|
}
|
|
iowrite32(val, reg + RCAR_USBCTR_REG);
|
|
|
|
/* Configure AHB master and slave modes */
|
|
iowrite32(RCAR_AHB_BUS_MODE, reg + RCAR_AHB_BUS_CTR_REG);
|
|
|
|
/* Configure PCI arbiter */
|
|
val = ioread32(reg + RCAR_PCI_ARBITER_CTR_REG);
|
|
val |= RCAR_PCI_ARBITER_PCIREQ0 | RCAR_PCI_ARBITER_PCIREQ1 |
|
|
RCAR_PCI_ARBITER_PCIBP_MODE;
|
|
iowrite32(val, reg + RCAR_PCI_ARBITER_CTR_REG);
|
|
|
|
/* PCI-AHB mapping */
|
|
iowrite32(priv->window_addr | RCAR_PCIAHB_PREFETCH16,
|
|
reg + RCAR_PCIAHB_WIN1_CTR_REG);
|
|
|
|
/* AHB-PCI mapping: OHCI/EHCI registers */
|
|
val = priv->mem_res.start | RCAR_AHBPCI_WIN_CTR_MEM;
|
|
iowrite32(val, reg + RCAR_AHBPCI_WIN2_CTR_REG);
|
|
|
|
/* Enable AHB-PCI bridge PCI configuration access */
|
|
iowrite32(RCAR_AHBPCI_WIN1_HOST | RCAR_AHBPCI_WIN_CTR_CFG,
|
|
reg + RCAR_AHBPCI_WIN1_CTR_REG);
|
|
/* Set PCI-AHB Window1 address */
|
|
iowrite32(priv->window_pci | PCI_BASE_ADDRESS_MEM_PREFETCH,
|
|
reg + PCI_BASE_ADDRESS_1);
|
|
/* Set AHB-PCI bridge PCI communication area address */
|
|
val = priv->cfg_res->start + RCAR_AHBPCI_PCICOM_OFFSET;
|
|
iowrite32(val, reg + PCI_BASE_ADDRESS_0);
|
|
|
|
val = ioread32(reg + PCI_COMMAND);
|
|
val |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
|
|
iowrite32(val, reg + PCI_COMMAND);
|
|
|
|
/* Enable PCI interrupts */
|
|
iowrite32(RCAR_PCI_INT_A | RCAR_PCI_INT_B | RCAR_PCI_INT_PME,
|
|
reg + RCAR_PCI_INT_ENABLE_REG);
|
|
|
|
if (priv->irq > 0)
|
|
rcar_pci_setup_errirq(priv);
|
|
|
|
/* Add PCI resources */
|
|
pci_add_resource(&sys->resources, &priv->mem_res);
|
|
ret = devm_request_pci_bus_resources(dev, &sys->resources);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Setup bus number based on platform device id / of bus-range */
|
|
sys->busnr = priv->busnr;
|
|
return 1;
|
|
}
|
|
|
|
static struct pci_ops rcar_pci_ops = {
|
|
.map_bus = rcar_pci_cfg_base,
|
|
.read = pci_generic_config_read,
|
|
.write = pci_generic_config_write,
|
|
};
|
|
|
|
static int rcar_pci_parse_map_dma_ranges(struct rcar_pci_priv *pci,
|
|
struct device_node *np)
|
|
{
|
|
struct device *dev = pci->dev;
|
|
struct of_pci_range range;
|
|
struct of_pci_range_parser parser;
|
|
int index = 0;
|
|
|
|
/* Failure to parse is ok as we fall back to defaults */
|
|
if (of_pci_dma_range_parser_init(&parser, np))
|
|
return 0;
|
|
|
|
/* Get the dma-ranges from DT */
|
|
for_each_of_pci_range(&parser, &range) {
|
|
/* Hardware only allows one inbound 32-bit range */
|
|
if (index)
|
|
return -EINVAL;
|
|
|
|
pci->window_addr = (unsigned long)range.cpu_addr;
|
|
pci->window_pci = (unsigned long)range.pci_addr;
|
|
pci->window_size = (unsigned long)range.size;
|
|
|
|
/* Catch HW limitations */
|
|
if (!(range.flags & IORESOURCE_PREFETCH)) {
|
|
dev_err(dev, "window must be prefetchable\n");
|
|
return -EINVAL;
|
|
}
|
|
if (pci->window_addr) {
|
|
u32 lowaddr = 1 << (ffs(pci->window_addr) - 1);
|
|
|
|
if (lowaddr < pci->window_size) {
|
|
dev_err(dev, "invalid window size/addr\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
index++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_pci_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *cfg_res, *mem_res;
|
|
struct rcar_pci_priv *priv;
|
|
void __iomem *reg;
|
|
struct hw_pci hw;
|
|
void *hw_private[1];
|
|
|
|
cfg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
reg = devm_ioremap_resource(dev, cfg_res);
|
|
if (IS_ERR(reg))
|
|
return PTR_ERR(reg);
|
|
|
|
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (!mem_res || !mem_res->start)
|
|
return -ENODEV;
|
|
|
|
if (mem_res->start & 0xFFFF)
|
|
return -EINVAL;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(struct rcar_pci_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->mem_res = *mem_res;
|
|
priv->cfg_res = cfg_res;
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
priv->reg = reg;
|
|
priv->dev = dev;
|
|
|
|
if (priv->irq < 0) {
|
|
dev_err(dev, "no valid irq found\n");
|
|
return priv->irq;
|
|
}
|
|
|
|
/* default window addr and size if not specified in DT */
|
|
priv->window_addr = 0x40000000;
|
|
priv->window_pci = 0x40000000;
|
|
priv->window_size = SZ_1G;
|
|
|
|
if (dev->of_node) {
|
|
struct resource busnr;
|
|
int ret;
|
|
|
|
ret = of_pci_parse_bus_range(dev->of_node, &busnr);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to parse bus-range\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->busnr = busnr.start;
|
|
if (busnr.end != busnr.start)
|
|
dev_warn(dev, "only one bus number supported\n");
|
|
|
|
ret = rcar_pci_parse_map_dma_ranges(priv, dev->of_node);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to parse dma-range\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
priv->busnr = pdev->id;
|
|
}
|
|
|
|
hw_private[0] = priv;
|
|
memset(&hw, 0, sizeof(hw));
|
|
hw.nr_controllers = ARRAY_SIZE(hw_private);
|
|
hw.io_optional = 1;
|
|
hw.private_data = hw_private;
|
|
hw.map_irq = rcar_pci_map_irq;
|
|
hw.ops = &rcar_pci_ops;
|
|
hw.setup = rcar_pci_setup;
|
|
pci_common_init_dev(dev, &hw);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id rcar_pci_of_match[] = {
|
|
{ .compatible = "renesas,pci-r8a7790", },
|
|
{ .compatible = "renesas,pci-r8a7791", },
|
|
{ .compatible = "renesas,pci-r8a7794", },
|
|
{ .compatible = "renesas,pci-rcar-gen2", },
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver rcar_pci_driver = {
|
|
.driver = {
|
|
.name = "pci-rcar-gen2",
|
|
.suppress_bind_attrs = true,
|
|
.of_match_table = rcar_pci_of_match,
|
|
},
|
|
.probe = rcar_pci_probe,
|
|
};
|
|
builtin_platform_driver(rcar_pci_driver);
|