linux_dsm_epyc7002/arch/x86/kernel/time_64.c
Linus Torvalds 936577c61d x86: Add IRQF_TIMER to legacy x86 timer interrupt descriptors
Right now nobody cares, but the suspend/resume code will eventually want
to suspend device interrupts without suspending the timer, and will
depend on this flag to know.

The modern x86 timer infrastructure uses the local APIC timers and never
shows up as a device interrupt at all, so it isn't affected and doesn't
need any of this.

Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22 10:27:49 -08:00

138 lines
3.3 KiB
C

/*
* "High Precision Event Timer" based timekeeping.
*
* Copyright (c) 1991,1992,1995 Linus Torvalds
* Copyright (c) 1994 Alan Modra
* Copyright (c) 1995 Markus Kuhn
* Copyright (c) 1996 Ingo Molnar
* Copyright (c) 1998 Andrea Arcangeli
* Copyright (c) 2002,2006 Vojtech Pavlik
* Copyright (c) 2003 Andi Kleen
* RTC support code taken from arch/i386/kernel/timers/time_hpet.c
*/
#include <linux/clockchips.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/time.h>
#include <linux/mca.h>
#include <linux/nmi.h>
#include <asm/i8253.h>
#include <asm/hpet.h>
#include <asm/vgtod.h>
#include <asm/time.h>
#include <asm/timer.h>
volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
unsigned long profile_pc(struct pt_regs *regs)
{
unsigned long pc = instruction_pointer(regs);
/* Assume the lock function has either no stack frame or a copy
of flags from PUSHF
Eflags always has bits 22 and up cleared unlike kernel addresses. */
if (!user_mode_vm(regs) && in_lock_functions(pc)) {
#ifdef CONFIG_FRAME_POINTER
return *(unsigned long *)(regs->bp + sizeof(long));
#else
unsigned long *sp = (unsigned long *)regs->sp;
if (sp[0] >> 22)
return sp[0];
if (sp[1] >> 22)
return sp[1];
#endif
}
return pc;
}
EXPORT_SYMBOL(profile_pc);
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
inc_irq_stat(irq0_irqs);
global_clock_event->event_handler(global_clock_event);
#ifdef CONFIG_MCA
if (MCA_bus) {
u8 irq_v = inb_p(0x61); /* read the current state */
outb_p(irq_v|0x80, 0x61); /* reset the IRQ */
}
#endif
return IRQ_HANDLED;
}
/* calibrate_cpu is used on systems with fixed rate TSCs to determine
* processor frequency */
#define TICK_COUNT 100000000
unsigned long __init calibrate_cpu(void)
{
int tsc_start, tsc_now;
int i, no_ctr_free;
unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0;
unsigned long flags;
for (i = 0; i < 4; i++)
if (avail_to_resrv_perfctr_nmi_bit(i))
break;
no_ctr_free = (i == 4);
if (no_ctr_free) {
WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... "
"cpu_khz value may be incorrect.\n");
i = 3;
rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
wrmsrl(MSR_K7_EVNTSEL3, 0);
rdmsrl(MSR_K7_PERFCTR3, pmc3);
} else {
reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
local_irq_save(flags);
/* start measuring cycles, incrementing from 0 */
wrmsrl(MSR_K7_PERFCTR0 + i, 0);
wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
rdtscl(tsc_start);
do {
rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
tsc_now = get_cycles();
} while ((tsc_now - tsc_start) < TICK_COUNT);
local_irq_restore(flags);
if (no_ctr_free) {
wrmsrl(MSR_K7_EVNTSEL3, 0);
wrmsrl(MSR_K7_PERFCTR3, pmc3);
wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
} else {
release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
return pmc_now * tsc_khz / (tsc_now - tsc_start);
}
static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING | IRQF_TIMER,
.mask = CPU_MASK_NONE,
.name = "timer"
};
void __init hpet_time_init(void)
{
if (!hpet_enable())
setup_pit_timer();
irq0.mask = cpumask_of_cpu(0);
setup_irq(0, &irq0);
}
void __init time_init(void)
{
tsc_init();
late_time_init = choose_time_init();
}