mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 15:15:59 +07:00
31184d8c6e
The errata FE-8471889 description has been updated. There is still a timing violation for repeated start. But the errata now states that it was only the case for the Standard mode (100 kHz), in Fast mode (400 kHz) there is no issue. This patch limit the errata fix to the Standard mode. It has been tesed successfully on the clearfog (Aramda 388 based board). Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
1019 lines
28 KiB
C
1019 lines
28 KiB
C
/*
|
|
* Driver for the i2c controller on the Marvell line of host bridges
|
|
* (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family).
|
|
*
|
|
* Author: Mark A. Greer <mgreer@mvista.com>
|
|
*
|
|
* 2005 (c) MontaVista, Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mv643xx_i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define MV64XXX_I2C_ADDR_ADDR(val) ((val & 0x7f) << 1)
|
|
#define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7)
|
|
#define MV64XXX_I2C_BAUD_DIV_M(val) ((val & 0xf) << 3)
|
|
|
|
#define MV64XXX_I2C_REG_CONTROL_ACK BIT(2)
|
|
#define MV64XXX_I2C_REG_CONTROL_IFLG BIT(3)
|
|
#define MV64XXX_I2C_REG_CONTROL_STOP BIT(4)
|
|
#define MV64XXX_I2C_REG_CONTROL_START BIT(5)
|
|
#define MV64XXX_I2C_REG_CONTROL_TWSIEN BIT(6)
|
|
#define MV64XXX_I2C_REG_CONTROL_INTEN BIT(7)
|
|
|
|
/* Ctlr status values */
|
|
#define MV64XXX_I2C_STATUS_BUS_ERR 0x00
|
|
#define MV64XXX_I2C_STATUS_MAST_START 0x08
|
|
#define MV64XXX_I2C_STATUS_MAST_REPEAT_START 0x10
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK 0x18
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ACK 0x28
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_NO_ACK 0x30
|
|
#define MV64XXX_I2C_STATUS_MAST_LOST_ARB 0x38
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK 0x40
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK 0x50
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0
|
|
#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0
|
|
#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8
|
|
#define MV64XXX_I2C_STATUS_NO_STATUS 0xf8
|
|
|
|
/* Register defines (I2C bridge) */
|
|
#define MV64XXX_I2C_REG_TX_DATA_LO 0xc0
|
|
#define MV64XXX_I2C_REG_TX_DATA_HI 0xc4
|
|
#define MV64XXX_I2C_REG_RX_DATA_LO 0xc8
|
|
#define MV64XXX_I2C_REG_RX_DATA_HI 0xcc
|
|
#define MV64XXX_I2C_REG_BRIDGE_CONTROL 0xd0
|
|
#define MV64XXX_I2C_REG_BRIDGE_STATUS 0xd4
|
|
#define MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE 0xd8
|
|
#define MV64XXX_I2C_REG_BRIDGE_INTR_MASK 0xdC
|
|
#define MV64XXX_I2C_REG_BRIDGE_TIMING 0xe0
|
|
|
|
/* Bridge Control values */
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_WR BIT(0)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_RD BIT(1)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT 2
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT BIT(12)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT 13
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT 16
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_ENABLE BIT(19)
|
|
#define MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START BIT(20)
|
|
|
|
/* Bridge Status values */
|
|
#define MV64XXX_I2C_BRIDGE_STATUS_ERROR BIT(0)
|
|
|
|
/* Driver states */
|
|
enum {
|
|
MV64XXX_I2C_STATE_INVALID,
|
|
MV64XXX_I2C_STATE_IDLE,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_START_COND,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_RESTART,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK,
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA,
|
|
};
|
|
|
|
/* Driver actions */
|
|
enum {
|
|
MV64XXX_I2C_ACTION_INVALID,
|
|
MV64XXX_I2C_ACTION_CONTINUE,
|
|
MV64XXX_I2C_ACTION_SEND_RESTART,
|
|
MV64XXX_I2C_ACTION_SEND_ADDR_1,
|
|
MV64XXX_I2C_ACTION_SEND_ADDR_2,
|
|
MV64XXX_I2C_ACTION_SEND_DATA,
|
|
MV64XXX_I2C_ACTION_RCV_DATA,
|
|
MV64XXX_I2C_ACTION_RCV_DATA_STOP,
|
|
MV64XXX_I2C_ACTION_SEND_STOP,
|
|
};
|
|
|
|
struct mv64xxx_i2c_regs {
|
|
u8 addr;
|
|
u8 ext_addr;
|
|
u8 data;
|
|
u8 control;
|
|
u8 status;
|
|
u8 clock;
|
|
u8 soft_reset;
|
|
};
|
|
|
|
struct mv64xxx_i2c_data {
|
|
struct i2c_msg *msgs;
|
|
int num_msgs;
|
|
int irq;
|
|
u32 state;
|
|
u32 action;
|
|
u32 aborting;
|
|
u32 cntl_bits;
|
|
void __iomem *reg_base;
|
|
struct mv64xxx_i2c_regs reg_offsets;
|
|
u32 addr1;
|
|
u32 addr2;
|
|
u32 bytes_left;
|
|
u32 byte_posn;
|
|
u32 send_stop;
|
|
u32 block;
|
|
int rc;
|
|
u32 freq_m;
|
|
u32 freq_n;
|
|
struct clk *clk;
|
|
struct clk *reg_clk;
|
|
wait_queue_head_t waitq;
|
|
spinlock_t lock;
|
|
struct i2c_msg *msg;
|
|
struct i2c_adapter adapter;
|
|
bool offload_enabled;
|
|
/* 5us delay in order to avoid repeated start timing violation */
|
|
bool errata_delay;
|
|
struct reset_control *rstc;
|
|
bool irq_clear_inverted;
|
|
/* Clk div is 2 to the power n, not 2 to the power n + 1 */
|
|
bool clk_n_base_0;
|
|
};
|
|
|
|
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
|
|
.addr = 0x00,
|
|
.ext_addr = 0x10,
|
|
.data = 0x04,
|
|
.control = 0x08,
|
|
.status = 0x0c,
|
|
.clock = 0x0c,
|
|
.soft_reset = 0x1c,
|
|
};
|
|
|
|
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = {
|
|
.addr = 0x00,
|
|
.ext_addr = 0x04,
|
|
.data = 0x08,
|
|
.control = 0x0c,
|
|
.status = 0x10,
|
|
.clock = 0x14,
|
|
.soft_reset = 0x18,
|
|
};
|
|
|
|
static void
|
|
mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 dir = 0;
|
|
|
|
drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
|
|
MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
|
|
|
|
if (msg->flags & I2C_M_RD)
|
|
dir = 1;
|
|
|
|
if (msg->flags & I2C_M_TEN) {
|
|
drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
|
|
drv_data->addr2 = (u32)msg->addr & 0xff;
|
|
} else {
|
|
drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir;
|
|
drv_data->addr2 = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Finite State Machine & Interrupt Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
|
|
/* Reset hardware and initialize FSM */
|
|
static void
|
|
mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
if (drv_data->offload_enabled) {
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_MASK);
|
|
}
|
|
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
|
|
writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
|
|
drv_data->reg_base + drv_data->reg_offsets.clock);
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.addr);
|
|
writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
|
|
writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
|
|
{
|
|
/*
|
|
* If state is idle, then this is likely the remnants of an old
|
|
* operation that driver has given up on or the user has killed.
|
|
* If so, issue the stop condition and go to idle.
|
|
*/
|
|
if (drv_data->state == MV64XXX_I2C_STATE_IDLE) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
return;
|
|
}
|
|
|
|
/* The status from the ctlr [mostly] tells us what to do next */
|
|
switch (status) {
|
|
/* Start condition interrupt */
|
|
case MV64XXX_I2C_STATUS_MAST_START: /* 0x08 */
|
|
case MV64XXX_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
|
|
break;
|
|
|
|
/* Performing a write */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
|
|
if (drv_data->msg->flags & I2C_M_TEN) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
|
|
if ((drv_data->bytes_left == 0)
|
|
|| (drv_data->aborting
|
|
&& (drv_data->byte_posn != 0))) {
|
|
if (drv_data->send_stop || drv_data->aborting) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
} else {
|
|
drv_data->action =
|
|
MV64XXX_I2C_ACTION_SEND_RESTART;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_RESTART;
|
|
}
|
|
} else {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
|
|
drv_data->bytes_left--;
|
|
}
|
|
break;
|
|
|
|
/* Performing a read */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */
|
|
if (drv_data->msg->flags & I2C_M_TEN) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2;
|
|
drv_data->state =
|
|
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
|
|
if (drv_data->bytes_left == 0) {
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
break;
|
|
}
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
|
|
if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK)
|
|
drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
|
|
else {
|
|
drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA;
|
|
drv_data->bytes_left--;
|
|
}
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
|
|
|
|
if ((drv_data->bytes_left == 1) || drv_data->aborting)
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_ACK;
|
|
break;
|
|
|
|
case MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
|
|
drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
break;
|
|
|
|
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
|
|
case MV64XXX_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */
|
|
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
|
|
/* Doesn't seem to be a device at other end */
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
drv_data->rc = -ENXIO;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
|
|
"status: 0x%x, addr: 0x%x, flags: 0x%x\n",
|
|
drv_data->state, status, drv_data->msg->addr,
|
|
drv_data->msg->flags);
|
|
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
drv_data->rc = -EIO;
|
|
}
|
|
}
|
|
|
|
static void mv64xxx_i2c_send_start(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
drv_data->msg = drv_data->msgs;
|
|
drv_data->byte_posn = 0;
|
|
drv_data->bytes_left = drv_data->msg->len;
|
|
drv_data->aborting = 0;
|
|
drv_data->rc = 0;
|
|
|
|
mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
switch(drv_data->action) {
|
|
case MV64XXX_I2C_ACTION_SEND_RESTART:
|
|
/* We should only get here if we have further messages */
|
|
BUG_ON(drv_data->num_msgs == 0);
|
|
|
|
drv_data->msgs++;
|
|
drv_data->num_msgs--;
|
|
mv64xxx_i2c_send_start(drv_data);
|
|
|
|
if (drv_data->errata_delay)
|
|
udelay(5);
|
|
|
|
/*
|
|
* We're never at the start of the message here, and by this
|
|
* time it's already too late to do any protocol mangling.
|
|
* Thankfully, do not advertise support for that feature.
|
|
*/
|
|
drv_data->send_stop = drv_data->num_msgs == 1;
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_CONTINUE:
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_ADDR_1:
|
|
writel(drv_data->addr1,
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_ADDR_2:
|
|
writel(drv_data->addr2,
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_SEND_DATA:
|
|
writel(drv_data->msg->buf[drv_data->byte_posn++],
|
|
drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_RCV_DATA:
|
|
drv_data->msg->buf[drv_data->byte_posn++] =
|
|
readl(drv_data->reg_base + drv_data->reg_offsets.data);
|
|
writel(drv_data->cntl_bits,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
|
|
drv_data->msg->buf[drv_data->byte_posn++] =
|
|
readl(drv_data->reg_base + drv_data->reg_offsets.data);
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->block = 0;
|
|
if (drv_data->errata_delay)
|
|
udelay(5);
|
|
|
|
wake_up(&drv_data->waitq);
|
|
break;
|
|
|
|
case MV64XXX_I2C_ACTION_INVALID:
|
|
default:
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx_i2c_do_action: Invalid action: %d\n",
|
|
drv_data->action);
|
|
drv_data->rc = -EIO;
|
|
|
|
/* FALLTHRU */
|
|
case MV64XXX_I2C_ACTION_SEND_STOP:
|
|
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
drv_data->block = 0;
|
|
wake_up(&drv_data->waitq);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_read_offload_rx_data(struct mv64xxx_i2c_data *drv_data,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 buf[2];
|
|
|
|
buf[0] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_LO);
|
|
buf[1] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_HI);
|
|
|
|
memcpy(msg->buf, buf, msg->len);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_intr_offload(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
u32 cause, status;
|
|
|
|
cause = readl(drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
if (!cause)
|
|
return IRQ_NONE;
|
|
|
|
status = readl(drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_STATUS);
|
|
|
|
if (status & MV64XXX_I2C_BRIDGE_STATUS_ERROR) {
|
|
drv_data->rc = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
drv_data->rc = 0;
|
|
|
|
/*
|
|
* Transaction is a one message read transaction, read data
|
|
* for this message.
|
|
*/
|
|
if (drv_data->num_msgs == 1 && drv_data->msgs[0].flags & I2C_M_RD) {
|
|
mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs);
|
|
drv_data->msgs++;
|
|
drv_data->num_msgs--;
|
|
}
|
|
/*
|
|
* Transaction is a two messages write/read transaction, read
|
|
* data for the second (read) message.
|
|
*/
|
|
else if (drv_data->num_msgs == 2 &&
|
|
!(drv_data->msgs[0].flags & I2C_M_RD) &&
|
|
drv_data->msgs[1].flags & I2C_M_RD) {
|
|
mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs + 1);
|
|
drv_data->msgs += 2;
|
|
drv_data->num_msgs -= 2;
|
|
}
|
|
|
|
out:
|
|
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
writel(0, drv_data->reg_base +
|
|
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
|
|
drv_data->block = 0;
|
|
|
|
wake_up(&drv_data->waitq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t
|
|
mv64xxx_i2c_intr(int irq, void *dev_id)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = dev_id;
|
|
unsigned long flags;
|
|
u32 status;
|
|
irqreturn_t rc = IRQ_NONE;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
if (drv_data->offload_enabled)
|
|
rc = mv64xxx_i2c_intr_offload(drv_data);
|
|
|
|
while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
|
|
MV64XXX_I2C_REG_CONTROL_IFLG) {
|
|
status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
|
|
mv64xxx_i2c_fsm(drv_data, status);
|
|
mv64xxx_i2c_do_action(drv_data);
|
|
|
|
if (drv_data->irq_clear_inverted)
|
|
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_IFLG,
|
|
drv_data->reg_base + drv_data->reg_offsets.control);
|
|
|
|
rc = IRQ_HANDLED;
|
|
}
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* I2C Msg Execution Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static void
|
|
mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
long time_left;
|
|
unsigned long flags;
|
|
char abort = 0;
|
|
|
|
time_left = wait_event_timeout(drv_data->waitq,
|
|
!drv_data->block, drv_data->adapter.timeout);
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
if (!time_left) { /* Timed out */
|
|
drv_data->rc = -ETIMEDOUT;
|
|
abort = 1;
|
|
} else if (time_left < 0) { /* Interrupted/Error */
|
|
drv_data->rc = time_left; /* errno value */
|
|
abort = 1;
|
|
}
|
|
|
|
if (abort && drv_data->block) {
|
|
drv_data->aborting = 1;
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
time_left = wait_event_timeout(drv_data->waitq,
|
|
!drv_data->block, drv_data->adapter.timeout);
|
|
|
|
if ((time_left <= 0) && drv_data->block) {
|
|
drv_data->state = MV64XXX_I2C_STATE_IDLE;
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: I2C bus locked, block: %d, "
|
|
"time_left: %d\n", drv_data->block,
|
|
(int)time_left);
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
}
|
|
} else
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
|
|
int is_last)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
|
|
|
|
drv_data->send_stop = is_last;
|
|
drv_data->block = 1;
|
|
mv64xxx_i2c_send_start(drv_data);
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
mv64xxx_i2c_wait_for_completion(drv_data);
|
|
return drv_data->rc;
|
|
}
|
|
|
|
static void
|
|
mv64xxx_i2c_prepare_tx(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msg = drv_data->msgs;
|
|
u32 buf[2];
|
|
|
|
memcpy(buf, msg->buf, msg->len);
|
|
|
|
writel(buf[0], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
|
|
writel(buf[1], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_offload_xfer(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msgs = drv_data->msgs;
|
|
int num = drv_data->num_msgs;
|
|
unsigned long ctrl_reg;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&drv_data->lock, flags);
|
|
|
|
/* Build transaction */
|
|
ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
|
|
(msgs[0].addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
|
|
|
|
if (msgs[0].flags & I2C_M_TEN)
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
|
|
|
|
/* Single write message transaction */
|
|
if (num == 1 && !(msgs[0].flags & I2C_M_RD)) {
|
|
size_t len = msgs[0].len - 1;
|
|
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
|
|
(len << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT);
|
|
mv64xxx_i2c_prepare_tx(drv_data);
|
|
}
|
|
/* Single read message transaction */
|
|
else if (num == 1 && msgs[0].flags & I2C_M_RD) {
|
|
size_t len = msgs[0].len - 1;
|
|
|
|
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
|
|
(len << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT);
|
|
}
|
|
/*
|
|
* Transaction with one write and one read message. This is
|
|
* guaranteed by the mv64xx_i2c_can_offload() checks.
|
|
*/
|
|
else if (num == 2) {
|
|
size_t lentx = msgs[0].len - 1;
|
|
size_t lenrx = msgs[1].len - 1;
|
|
|
|
ctrl_reg |=
|
|
MV64XXX_I2C_BRIDGE_CONTROL_RD |
|
|
MV64XXX_I2C_BRIDGE_CONTROL_WR |
|
|
(lentx << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT) |
|
|
(lenrx << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT) |
|
|
MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START;
|
|
mv64xxx_i2c_prepare_tx(drv_data);
|
|
}
|
|
|
|
/* Execute transaction */
|
|
drv_data->block = 1;
|
|
writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
|
|
spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
|
|
mv64xxx_i2c_wait_for_completion(drv_data);
|
|
|
|
return drv_data->rc;
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_i2c_valid_offload_sz(struct i2c_msg *msg)
|
|
{
|
|
return msg->len <= 8 && msg->len >= 1;
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_i2c_can_offload(struct mv64xxx_i2c_data *drv_data)
|
|
{
|
|
struct i2c_msg *msgs = drv_data->msgs;
|
|
int num = drv_data->num_msgs;
|
|
|
|
if (!drv_data->offload_enabled)
|
|
return false;
|
|
|
|
/*
|
|
* We can offload a transaction consisting of a single
|
|
* message, as long as the message has a length between 1 and
|
|
* 8 bytes.
|
|
*/
|
|
if (num == 1 && mv64xxx_i2c_valid_offload_sz(msgs))
|
|
return true;
|
|
|
|
/*
|
|
* We can offload a transaction consisting of two messages, if
|
|
* the first is a write and a second is a read, and both have
|
|
* a length between 1 and 8 bytes.
|
|
*/
|
|
if (num == 2 &&
|
|
mv64xxx_i2c_valid_offload_sz(msgs) &&
|
|
mv64xxx_i2c_valid_offload_sz(msgs + 1) &&
|
|
!(msgs[0].flags & I2C_M_RD) &&
|
|
msgs[1].flags & I2C_M_RD)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* I2C Core Support Routines (Interface to higher level I2C code)
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static u32
|
|
mv64xxx_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
|
|
int rc, ret = num;
|
|
|
|
BUG_ON(drv_data->msgs != NULL);
|
|
drv_data->msgs = msgs;
|
|
drv_data->num_msgs = num;
|
|
|
|
if (mv64xxx_i2c_can_offload(drv_data))
|
|
rc = mv64xxx_i2c_offload_xfer(drv_data);
|
|
else
|
|
rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
|
|
|
|
if (rc < 0)
|
|
ret = rc;
|
|
|
|
drv_data->num_msgs = 0;
|
|
drv_data->msgs = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_algorithm mv64xxx_i2c_algo = {
|
|
.master_xfer = mv64xxx_i2c_xfer,
|
|
.functionality = mv64xxx_i2c_functionality,
|
|
};
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Driver Interface & Early Init Routines
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-i2c", .data = &mv64xxx_i2c_regs_sun4i},
|
|
{ .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
|
|
{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
|
|
|
|
#ifdef CONFIG_OF
|
|
static int
|
|
mv64xxx_calc_freq(struct mv64xxx_i2c_data *drv_data,
|
|
const int tclk, const int n, const int m)
|
|
{
|
|
if (drv_data->clk_n_base_0)
|
|
return tclk / (10 * (m + 1) * (1 << n));
|
|
else
|
|
return tclk / (10 * (m + 1) * (2 << n));
|
|
}
|
|
|
|
static bool
|
|
mv64xxx_find_baud_factors(struct mv64xxx_i2c_data *drv_data,
|
|
const u32 req_freq, const u32 tclk)
|
|
{
|
|
int freq, delta, best_delta = INT_MAX;
|
|
int m, n;
|
|
|
|
for (n = 0; n <= 7; n++)
|
|
for (m = 0; m <= 15; m++) {
|
|
freq = mv64xxx_calc_freq(drv_data, tclk, n, m);
|
|
delta = req_freq - freq;
|
|
if (delta >= 0 && delta < best_delta) {
|
|
drv_data->freq_m = m;
|
|
drv_data->freq_n = n;
|
|
best_delta = delta;
|
|
}
|
|
if (best_delta == 0)
|
|
return true;
|
|
}
|
|
if (best_delta == INT_MAX)
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
static int
|
|
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
|
|
struct device *dev)
|
|
{
|
|
const struct of_device_id *device;
|
|
struct device_node *np = dev->of_node;
|
|
u32 bus_freq, tclk;
|
|
int rc = 0;
|
|
|
|
/* CLK is mandatory when using DT to describe the i2c bus. We
|
|
* need to know tclk in order to calculate bus clock
|
|
* factors.
|
|
*/
|
|
if (IS_ERR(drv_data->clk)) {
|
|
rc = -ENODEV;
|
|
goto out;
|
|
}
|
|
tclk = clk_get_rate(drv_data->clk);
|
|
|
|
if (of_property_read_u32(np, "clock-frequency", &bus_freq))
|
|
bus_freq = 100000; /* 100kHz by default */
|
|
|
|
if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") ||
|
|
of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
|
|
drv_data->clk_n_base_0 = true;
|
|
|
|
if (!mv64xxx_find_baud_factors(drv_data, bus_freq, tclk)) {
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
drv_data->rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
|
|
if (IS_ERR(drv_data->rstc)) {
|
|
rc = PTR_ERR(drv_data->rstc);
|
|
goto out;
|
|
}
|
|
reset_control_deassert(drv_data->rstc);
|
|
|
|
/* Its not yet defined how timeouts will be specified in device tree.
|
|
* So hard code the value to 1 second.
|
|
*/
|
|
drv_data->adapter.timeout = HZ;
|
|
|
|
device = of_match_device(mv64xxx_i2c_of_match_table, dev);
|
|
if (!device)
|
|
return -ENODEV;
|
|
|
|
memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
|
|
|
|
/*
|
|
* For controllers embedded in new SoCs activate the
|
|
* Transaction Generator support and the errata fix.
|
|
*/
|
|
if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
|
|
drv_data->offload_enabled = true;
|
|
/* The delay is only needed in standard mode (100kHz) */
|
|
if (bus_freq <= 100000)
|
|
drv_data->errata_delay = true;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
|
|
drv_data->offload_enabled = false;
|
|
/* The delay is only needed in standard mode (100kHz) */
|
|
if (bus_freq <= 100000)
|
|
drv_data->errata_delay = true;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
|
|
drv_data->irq_clear_inverted = true;
|
|
|
|
out:
|
|
return rc;
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static int
|
|
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
|
|
struct device *dev)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int
|
|
mv64xxx_i2c_probe(struct platform_device *pd)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data;
|
|
struct mv64xxx_i2c_pdata *pdata = dev_get_platdata(&pd->dev);
|
|
struct resource *r;
|
|
int rc;
|
|
|
|
if ((!pdata && !pd->dev.of_node))
|
|
return -ENODEV;
|
|
|
|
drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data),
|
|
GFP_KERNEL);
|
|
if (!drv_data)
|
|
return -ENOMEM;
|
|
|
|
r = platform_get_resource(pd, IORESOURCE_MEM, 0);
|
|
drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
|
|
if (IS_ERR(drv_data->reg_base))
|
|
return PTR_ERR(drv_data->reg_base);
|
|
|
|
strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
|
|
sizeof(drv_data->adapter.name));
|
|
|
|
init_waitqueue_head(&drv_data->waitq);
|
|
spin_lock_init(&drv_data->lock);
|
|
|
|
/* Not all platforms have clocks */
|
|
drv_data->clk = devm_clk_get(&pd->dev, NULL);
|
|
if (IS_ERR(drv_data->clk) && PTR_ERR(drv_data->clk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
if (!IS_ERR(drv_data->clk))
|
|
clk_prepare_enable(drv_data->clk);
|
|
|
|
drv_data->reg_clk = devm_clk_get(&pd->dev, "reg");
|
|
if (IS_ERR(drv_data->reg_clk) &&
|
|
PTR_ERR(drv_data->reg_clk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
if (!IS_ERR(drv_data->reg_clk))
|
|
clk_prepare_enable(drv_data->reg_clk);
|
|
|
|
drv_data->irq = platform_get_irq(pd, 0);
|
|
|
|
if (pdata) {
|
|
drv_data->freq_m = pdata->freq_m;
|
|
drv_data->freq_n = pdata->freq_n;
|
|
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
|
|
drv_data->offload_enabled = false;
|
|
memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
|
|
} else if (pd->dev.of_node) {
|
|
rc = mv64xxx_of_config(drv_data, &pd->dev);
|
|
if (rc)
|
|
goto exit_clk;
|
|
}
|
|
if (drv_data->irq < 0) {
|
|
rc = drv_data->irq;
|
|
goto exit_reset;
|
|
}
|
|
|
|
drv_data->adapter.dev.parent = &pd->dev;
|
|
drv_data->adapter.algo = &mv64xxx_i2c_algo;
|
|
drv_data->adapter.owner = THIS_MODULE;
|
|
drv_data->adapter.class = I2C_CLASS_DEPRECATED;
|
|
drv_data->adapter.nr = pd->id;
|
|
drv_data->adapter.dev.of_node = pd->dev.of_node;
|
|
platform_set_drvdata(pd, drv_data);
|
|
i2c_set_adapdata(&drv_data->adapter, drv_data);
|
|
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
|
|
rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
|
|
MV64XXX_I2C_CTLR_NAME, drv_data);
|
|
if (rc) {
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: Can't register intr handler irq%d: %d\n",
|
|
drv_data->irq, rc);
|
|
goto exit_reset;
|
|
} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
|
|
dev_err(&drv_data->adapter.dev,
|
|
"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
|
|
goto exit_free_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_free_irq:
|
|
free_irq(drv_data->irq, drv_data);
|
|
exit_reset:
|
|
reset_control_assert(drv_data->rstc);
|
|
exit_clk:
|
|
clk_disable_unprepare(drv_data->reg_clk);
|
|
clk_disable_unprepare(drv_data->clk);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
mv64xxx_i2c_remove(struct platform_device *dev)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = platform_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&drv_data->adapter);
|
|
free_irq(drv_data->irq, drv_data);
|
|
reset_control_assert(drv_data->rstc);
|
|
clk_disable_unprepare(drv_data->reg_clk);
|
|
clk_disable_unprepare(drv_data->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mv64xxx_i2c_resume(struct device *dev)
|
|
{
|
|
struct mv64xxx_i2c_data *drv_data = dev_get_drvdata(dev);
|
|
|
|
mv64xxx_i2c_hw_init(drv_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops mv64xxx_i2c_pm = {
|
|
.resume = mv64xxx_i2c_resume,
|
|
};
|
|
|
|
#define mv64xxx_i2c_pm_ops (&mv64xxx_i2c_pm)
|
|
#else
|
|
#define mv64xxx_i2c_pm_ops NULL
|
|
#endif
|
|
|
|
static struct platform_driver mv64xxx_i2c_driver = {
|
|
.probe = mv64xxx_i2c_probe,
|
|
.remove = mv64xxx_i2c_remove,
|
|
.driver = {
|
|
.name = MV64XXX_I2C_CTLR_NAME,
|
|
.pm = mv64xxx_i2c_pm_ops,
|
|
.of_match_table = mv64xxx_i2c_of_match_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mv64xxx_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
|
|
MODULE_DESCRIPTION("Marvell mv64xxx host bridge i2c ctlr driver");
|
|
MODULE_LICENSE("GPL");
|