linux_dsm_epyc7002/arch/x86/entry/common.c
Thomas Gleixner 4facb95b7a x86/entry: Unbreak 32bit fast syscall
Andy reported that the syscall treacing for 32bit fast syscall fails:

# ./tools/testing/selftests/x86/ptrace_syscall_32
...
[RUN] SYSEMU
[FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732)
...
[RUN] SYSCALL
[FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732)
 
The eason is that the conversion to generic entry code moved the retrieval
of the sixth argument (EBP) after the point where the syscall entry work
runs, i.e. ptrace, seccomp, audit...

Unbreak it by providing a split up version of syscall_enter_from_user_mode().

- syscall_enter_from_user_mode_prepare() establishes state and enables
  interrupts

- syscall_enter_from_user_mode_work() runs the entry work

Replace the call to syscall_enter_from_user_mode() in the 32bit fast
syscall C-entry with the split functions and stick the EBP retrieval
between them.

Fixes: 27d6b4d14f ("x86/entry: Use generic syscall entry function")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de
2020-09-04 15:50:14 +02:00

318 lines
8.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* common.c - C code for kernel entry and exit
* Copyright (c) 2015 Andrew Lutomirski
*
* Based on asm and ptrace code by many authors. The code here originated
* in ptrace.c and signal.c.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/entry-common.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/export.h>
#include <linux/nospec.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#ifdef CONFIG_XEN_PV
#include <xen/xen-ops.h>
#include <xen/events.h>
#endif
#include <asm/desc.h>
#include <asm/traps.h>
#include <asm/vdso.h>
#include <asm/cpufeature.h>
#include <asm/fpu/api.h>
#include <asm/nospec-branch.h>
#include <asm/io_bitmap.h>
#include <asm/syscall.h>
#include <asm/irq_stack.h>
#ifdef CONFIG_X86_64
__visible noinstr void do_syscall_64(unsigned long nr, struct pt_regs *regs)
{
nr = syscall_enter_from_user_mode(regs, nr);
instrumentation_begin();
if (likely(nr < NR_syscalls)) {
nr = array_index_nospec(nr, NR_syscalls);
regs->ax = sys_call_table[nr](regs);
#ifdef CONFIG_X86_X32_ABI
} else if (likely((nr & __X32_SYSCALL_BIT) &&
(nr & ~__X32_SYSCALL_BIT) < X32_NR_syscalls)) {
nr = array_index_nospec(nr & ~__X32_SYSCALL_BIT,
X32_NR_syscalls);
regs->ax = x32_sys_call_table[nr](regs);
#endif
}
instrumentation_end();
syscall_exit_to_user_mode(regs);
}
#endif
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
static __always_inline unsigned int syscall_32_enter(struct pt_regs *regs)
{
if (IS_ENABLED(CONFIG_IA32_EMULATION))
current_thread_info()->status |= TS_COMPAT;
return (unsigned int)regs->orig_ax;
}
/*
* Invoke a 32-bit syscall. Called with IRQs on in CONTEXT_KERNEL.
*/
static __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs,
unsigned int nr)
{
if (likely(nr < IA32_NR_syscalls)) {
instrumentation_begin();
nr = array_index_nospec(nr, IA32_NR_syscalls);
regs->ax = ia32_sys_call_table[nr](regs);
instrumentation_end();
}
}
/* Handles int $0x80 */
__visible noinstr void do_int80_syscall_32(struct pt_regs *regs)
{
unsigned int nr = syscall_32_enter(regs);
/*
* Subtlety here: if ptrace pokes something larger than 2^32-1 into
* orig_ax, the unsigned int return value truncates it. This may
* or may not be necessary, but it matches the old asm behavior.
*/
nr = (unsigned int)syscall_enter_from_user_mode(regs, nr);
do_syscall_32_irqs_on(regs, nr);
syscall_exit_to_user_mode(regs);
}
static noinstr bool __do_fast_syscall_32(struct pt_regs *regs)
{
unsigned int nr = syscall_32_enter(regs);
int res;
/*
* This cannot use syscall_enter_from_user_mode() as it has to
* fetch EBP before invoking any of the syscall entry work
* functions.
*/
syscall_enter_from_user_mode_prepare(regs);
instrumentation_begin();
/* Fetch EBP from where the vDSO stashed it. */
if (IS_ENABLED(CONFIG_X86_64)) {
/*
* Micro-optimization: the pointer we're following is
* explicitly 32 bits, so it can't be out of range.
*/
res = __get_user(*(u32 *)&regs->bp,
(u32 __user __force *)(unsigned long)(u32)regs->sp);
} else {
res = get_user(*(u32 *)&regs->bp,
(u32 __user __force *)(unsigned long)(u32)regs->sp);
}
instrumentation_end();
if (res) {
/* User code screwed up. */
regs->ax = -EFAULT;
syscall_exit_to_user_mode(regs);
return false;
}
/* The case truncates any ptrace induced syscall nr > 2^32 -1 */
nr = (unsigned int)syscall_enter_from_user_mode_work(regs, nr);
/* Now this is just like a normal syscall. */
do_syscall_32_irqs_on(regs, nr);
syscall_exit_to_user_mode(regs);
return true;
}
/* Returns 0 to return using IRET or 1 to return using SYSEXIT/SYSRETL. */
__visible noinstr long do_fast_syscall_32(struct pt_regs *regs)
{
/*
* Called using the internal vDSO SYSENTER/SYSCALL32 calling
* convention. Adjust regs so it looks like we entered using int80.
*/
unsigned long landing_pad = (unsigned long)current->mm->context.vdso +
vdso_image_32.sym_int80_landing_pad;
/*
* SYSENTER loses EIP, and even SYSCALL32 needs us to skip forward
* so that 'regs->ip -= 2' lands back on an int $0x80 instruction.
* Fix it up.
*/
regs->ip = landing_pad;
/* Invoke the syscall. If it failed, keep it simple: use IRET. */
if (!__do_fast_syscall_32(regs))
return 0;
#ifdef CONFIG_X86_64
/*
* Opportunistic SYSRETL: if possible, try to return using SYSRETL.
* SYSRETL is available on all 64-bit CPUs, so we don't need to
* bother with SYSEXIT.
*
* Unlike 64-bit opportunistic SYSRET, we can't check that CX == IP,
* because the ECX fixup above will ensure that this is essentially
* never the case.
*/
return regs->cs == __USER32_CS && regs->ss == __USER_DS &&
regs->ip == landing_pad &&
(regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF)) == 0;
#else
/*
* Opportunistic SYSEXIT: if possible, try to return using SYSEXIT.
*
* Unlike 64-bit opportunistic SYSRET, we can't check that CX == IP,
* because the ECX fixup above will ensure that this is essentially
* never the case.
*
* We don't allow syscalls at all from VM86 mode, but we still
* need to check VM, because we might be returning from sys_vm86.
*/
return static_cpu_has(X86_FEATURE_SEP) &&
regs->cs == __USER_CS && regs->ss == __USER_DS &&
regs->ip == landing_pad &&
(regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF | X86_EFLAGS_VM)) == 0;
#endif
}
/* Returns 0 to return using IRET or 1 to return using SYSEXIT/SYSRETL. */
__visible noinstr long do_SYSENTER_32(struct pt_regs *regs)
{
/* SYSENTER loses RSP, but the vDSO saved it in RBP. */
regs->sp = regs->bp;
/* SYSENTER clobbers EFLAGS.IF. Assume it was set in usermode. */
regs->flags |= X86_EFLAGS_IF;
return do_fast_syscall_32(regs);
}
#endif
SYSCALL_DEFINE0(ni_syscall)
{
return -ENOSYS;
}
noinstr bool idtentry_enter_nmi(struct pt_regs *regs)
{
bool irq_state = lockdep_hardirqs_enabled();
__nmi_enter();
lockdep_hardirqs_off(CALLER_ADDR0);
lockdep_hardirq_enter();
rcu_nmi_enter();
instrumentation_begin();
trace_hardirqs_off_finish();
ftrace_nmi_enter();
instrumentation_end();
return irq_state;
}
noinstr void idtentry_exit_nmi(struct pt_regs *regs, bool restore)
{
instrumentation_begin();
ftrace_nmi_exit();
if (restore) {
trace_hardirqs_on_prepare();
lockdep_hardirqs_on_prepare(CALLER_ADDR0);
}
instrumentation_end();
rcu_nmi_exit();
lockdep_hardirq_exit();
if (restore)
lockdep_hardirqs_on(CALLER_ADDR0);
__nmi_exit();
}
#ifdef CONFIG_XEN_PV
#ifndef CONFIG_PREEMPTION
/*
* Some hypercalls issued by the toolstack can take many 10s of
* seconds. Allow tasks running hypercalls via the privcmd driver to
* be voluntarily preempted even if full kernel preemption is
* disabled.
*
* Such preemptible hypercalls are bracketed by
* xen_preemptible_hcall_begin() and xen_preemptible_hcall_end()
* calls.
*/
DEFINE_PER_CPU(bool, xen_in_preemptible_hcall);
EXPORT_SYMBOL_GPL(xen_in_preemptible_hcall);
/*
* In case of scheduling the flag must be cleared and restored after
* returning from schedule as the task might move to a different CPU.
*/
static __always_inline bool get_and_clear_inhcall(void)
{
bool inhcall = __this_cpu_read(xen_in_preemptible_hcall);
__this_cpu_write(xen_in_preemptible_hcall, false);
return inhcall;
}
static __always_inline void restore_inhcall(bool inhcall)
{
__this_cpu_write(xen_in_preemptible_hcall, inhcall);
}
#else
static __always_inline bool get_and_clear_inhcall(void) { return false; }
static __always_inline void restore_inhcall(bool inhcall) { }
#endif
static void __xen_pv_evtchn_do_upcall(void)
{
irq_enter_rcu();
inc_irq_stat(irq_hv_callback_count);
xen_hvm_evtchn_do_upcall();
irq_exit_rcu();
}
__visible noinstr void xen_pv_evtchn_do_upcall(struct pt_regs *regs)
{
struct pt_regs *old_regs;
bool inhcall;
irqentry_state_t state;
state = irqentry_enter(regs);
old_regs = set_irq_regs(regs);
instrumentation_begin();
run_on_irqstack_cond(__xen_pv_evtchn_do_upcall, NULL, regs);
instrumentation_begin();
set_irq_regs(old_regs);
inhcall = get_and_clear_inhcall();
if (inhcall && !WARN_ON_ONCE(state.exit_rcu)) {
instrumentation_begin();
irqentry_exit_cond_resched();
instrumentation_end();
restore_inhcall(inhcall);
} else {
irqentry_exit(regs, state);
}
}
#endif /* CONFIG_XEN_PV */