mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
725d548f14
Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Sathya Perla <sperla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
5207 lines
133 KiB
C
5207 lines
133 KiB
C
/*
|
|
* Copyright (C) 2005 - 2014 Emulex
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version 2
|
|
* as published by the Free Software Foundation. The full GNU General
|
|
* Public License is included in this distribution in the file called COPYING.
|
|
*
|
|
* Contact Information:
|
|
* linux-drivers@emulex.com
|
|
*
|
|
* Emulex
|
|
* 3333 Susan Street
|
|
* Costa Mesa, CA 92626
|
|
*/
|
|
|
|
#include <linux/prefetch.h>
|
|
#include <linux/module.h>
|
|
#include "be.h"
|
|
#include "be_cmds.h"
|
|
#include <asm/div64.h>
|
|
#include <linux/aer.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <net/busy_poll.h>
|
|
#include <net/vxlan.h>
|
|
|
|
MODULE_VERSION(DRV_VER);
|
|
MODULE_DEVICE_TABLE(pci, be_dev_ids);
|
|
MODULE_DESCRIPTION(DRV_DESC " " DRV_VER);
|
|
MODULE_AUTHOR("Emulex Corporation");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static unsigned int num_vfs;
|
|
module_param(num_vfs, uint, S_IRUGO);
|
|
MODULE_PARM_DESC(num_vfs, "Number of PCI VFs to initialize");
|
|
|
|
static ushort rx_frag_size = 2048;
|
|
module_param(rx_frag_size, ushort, S_IRUGO);
|
|
MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
|
|
|
|
static const struct pci_device_id be_dev_ids[] = {
|
|
{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
|
|
{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
|
|
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
|
|
{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
|
|
{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID3)},
|
|
{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID4)},
|
|
{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID5)},
|
|
{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID6)},
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, be_dev_ids);
|
|
/* UE Status Low CSR */
|
|
static const char * const ue_status_low_desc[] = {
|
|
"CEV",
|
|
"CTX",
|
|
"DBUF",
|
|
"ERX",
|
|
"Host",
|
|
"MPU",
|
|
"NDMA",
|
|
"PTC ",
|
|
"RDMA ",
|
|
"RXF ",
|
|
"RXIPS ",
|
|
"RXULP0 ",
|
|
"RXULP1 ",
|
|
"RXULP2 ",
|
|
"TIM ",
|
|
"TPOST ",
|
|
"TPRE ",
|
|
"TXIPS ",
|
|
"TXULP0 ",
|
|
"TXULP1 ",
|
|
"UC ",
|
|
"WDMA ",
|
|
"TXULP2 ",
|
|
"HOST1 ",
|
|
"P0_OB_LINK ",
|
|
"P1_OB_LINK ",
|
|
"HOST_GPIO ",
|
|
"MBOX ",
|
|
"ERX2 ",
|
|
"SPARE ",
|
|
"JTAG ",
|
|
"MPU_INTPEND "
|
|
};
|
|
|
|
/* UE Status High CSR */
|
|
static const char * const ue_status_hi_desc[] = {
|
|
"LPCMEMHOST",
|
|
"MGMT_MAC",
|
|
"PCS0ONLINE",
|
|
"MPU_IRAM",
|
|
"PCS1ONLINE",
|
|
"PCTL0",
|
|
"PCTL1",
|
|
"PMEM",
|
|
"RR",
|
|
"TXPB",
|
|
"RXPP",
|
|
"XAUI",
|
|
"TXP",
|
|
"ARM",
|
|
"IPC",
|
|
"HOST2",
|
|
"HOST3",
|
|
"HOST4",
|
|
"HOST5",
|
|
"HOST6",
|
|
"HOST7",
|
|
"ECRC",
|
|
"Poison TLP",
|
|
"NETC",
|
|
"PERIPH",
|
|
"LLTXULP",
|
|
"D2P",
|
|
"RCON",
|
|
"LDMA",
|
|
"LLTXP",
|
|
"LLTXPB",
|
|
"Unknown"
|
|
};
|
|
|
|
static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q)
|
|
{
|
|
struct be_dma_mem *mem = &q->dma_mem;
|
|
|
|
if (mem->va) {
|
|
dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va,
|
|
mem->dma);
|
|
mem->va = NULL;
|
|
}
|
|
}
|
|
|
|
static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q,
|
|
u16 len, u16 entry_size)
|
|
{
|
|
struct be_dma_mem *mem = &q->dma_mem;
|
|
|
|
memset(q, 0, sizeof(*q));
|
|
q->len = len;
|
|
q->entry_size = entry_size;
|
|
mem->size = len * entry_size;
|
|
mem->va = dma_zalloc_coherent(&adapter->pdev->dev, mem->size, &mem->dma,
|
|
GFP_KERNEL);
|
|
if (!mem->va)
|
|
return -ENOMEM;
|
|
return 0;
|
|
}
|
|
|
|
static void be_reg_intr_set(struct be_adapter *adapter, bool enable)
|
|
{
|
|
u32 reg, enabled;
|
|
|
|
pci_read_config_dword(adapter->pdev, PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET,
|
|
®);
|
|
enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
|
|
|
|
if (!enabled && enable)
|
|
reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
|
|
else if (enabled && !enable)
|
|
reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
|
|
else
|
|
return;
|
|
|
|
pci_write_config_dword(adapter->pdev,
|
|
PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET, reg);
|
|
}
|
|
|
|
static void be_intr_set(struct be_adapter *adapter, bool enable)
|
|
{
|
|
int status = 0;
|
|
|
|
/* On lancer interrupts can't be controlled via this register */
|
|
if (lancer_chip(adapter))
|
|
return;
|
|
|
|
if (adapter->eeh_error)
|
|
return;
|
|
|
|
status = be_cmd_intr_set(adapter, enable);
|
|
if (status)
|
|
be_reg_intr_set(adapter, enable);
|
|
}
|
|
|
|
static void be_rxq_notify(struct be_adapter *adapter, u16 qid, u16 posted)
|
|
{
|
|
u32 val = 0;
|
|
|
|
val |= qid & DB_RQ_RING_ID_MASK;
|
|
val |= posted << DB_RQ_NUM_POSTED_SHIFT;
|
|
|
|
wmb();
|
|
iowrite32(val, adapter->db + DB_RQ_OFFSET);
|
|
}
|
|
|
|
static void be_txq_notify(struct be_adapter *adapter, struct be_tx_obj *txo,
|
|
u16 posted)
|
|
{
|
|
u32 val = 0;
|
|
|
|
val |= txo->q.id & DB_TXULP_RING_ID_MASK;
|
|
val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT;
|
|
|
|
wmb();
|
|
iowrite32(val, adapter->db + txo->db_offset);
|
|
}
|
|
|
|
static void be_eq_notify(struct be_adapter *adapter, u16 qid,
|
|
bool arm, bool clear_int, u16 num_popped)
|
|
{
|
|
u32 val = 0;
|
|
|
|
val |= qid & DB_EQ_RING_ID_MASK;
|
|
val |= ((qid & DB_EQ_RING_ID_EXT_MASK) << DB_EQ_RING_ID_EXT_MASK_SHIFT);
|
|
|
|
if (adapter->eeh_error)
|
|
return;
|
|
|
|
if (arm)
|
|
val |= 1 << DB_EQ_REARM_SHIFT;
|
|
if (clear_int)
|
|
val |= 1 << DB_EQ_CLR_SHIFT;
|
|
val |= 1 << DB_EQ_EVNT_SHIFT;
|
|
val |= num_popped << DB_EQ_NUM_POPPED_SHIFT;
|
|
iowrite32(val, adapter->db + DB_EQ_OFFSET);
|
|
}
|
|
|
|
void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped)
|
|
{
|
|
u32 val = 0;
|
|
|
|
val |= qid & DB_CQ_RING_ID_MASK;
|
|
val |= ((qid & DB_CQ_RING_ID_EXT_MASK) <<
|
|
DB_CQ_RING_ID_EXT_MASK_SHIFT);
|
|
|
|
if (adapter->eeh_error)
|
|
return;
|
|
|
|
if (arm)
|
|
val |= 1 << DB_CQ_REARM_SHIFT;
|
|
val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
|
|
iowrite32(val, adapter->db + DB_CQ_OFFSET);
|
|
}
|
|
|
|
static int be_mac_addr_set(struct net_device *netdev, void *p)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct sockaddr *addr = p;
|
|
int status;
|
|
u8 mac[ETH_ALEN];
|
|
u32 old_pmac_id = adapter->pmac_id[0], curr_pmac_id = 0;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
/* Proceed further only if, User provided MAC is different
|
|
* from active MAC
|
|
*/
|
|
if (ether_addr_equal(addr->sa_data, netdev->dev_addr))
|
|
return 0;
|
|
|
|
/* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT
|
|
* privilege or if PF did not provision the new MAC address.
|
|
* On BE3, this cmd will always fail if the VF doesn't have the
|
|
* FILTMGMT privilege. This failure is OK, only if the PF programmed
|
|
* the MAC for the VF.
|
|
*/
|
|
status = be_cmd_pmac_add(adapter, (u8 *)addr->sa_data,
|
|
adapter->if_handle, &adapter->pmac_id[0], 0);
|
|
if (!status) {
|
|
curr_pmac_id = adapter->pmac_id[0];
|
|
|
|
/* Delete the old programmed MAC. This call may fail if the
|
|
* old MAC was already deleted by the PF driver.
|
|
*/
|
|
if (adapter->pmac_id[0] != old_pmac_id)
|
|
be_cmd_pmac_del(adapter, adapter->if_handle,
|
|
old_pmac_id, 0);
|
|
}
|
|
|
|
/* Decide if the new MAC is successfully activated only after
|
|
* querying the FW
|
|
*/
|
|
status = be_cmd_get_active_mac(adapter, curr_pmac_id, mac,
|
|
adapter->if_handle, true, 0);
|
|
if (status)
|
|
goto err;
|
|
|
|
/* The MAC change did not happen, either due to lack of privilege
|
|
* or PF didn't pre-provision.
|
|
*/
|
|
if (!ether_addr_equal(addr->sa_data, mac)) {
|
|
status = -EPERM;
|
|
goto err;
|
|
}
|
|
|
|
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
|
|
dev_info(dev, "MAC address changed to %pM\n", mac);
|
|
return 0;
|
|
err:
|
|
dev_warn(dev, "MAC address change to %pM failed\n", addr->sa_data);
|
|
return status;
|
|
}
|
|
|
|
/* BE2 supports only v0 cmd */
|
|
static void *hw_stats_from_cmd(struct be_adapter *adapter)
|
|
{
|
|
if (BE2_chip(adapter)) {
|
|
struct be_cmd_resp_get_stats_v0 *cmd = adapter->stats_cmd.va;
|
|
|
|
return &cmd->hw_stats;
|
|
} else if (BE3_chip(adapter)) {
|
|
struct be_cmd_resp_get_stats_v1 *cmd = adapter->stats_cmd.va;
|
|
|
|
return &cmd->hw_stats;
|
|
} else {
|
|
struct be_cmd_resp_get_stats_v2 *cmd = adapter->stats_cmd.va;
|
|
|
|
return &cmd->hw_stats;
|
|
}
|
|
}
|
|
|
|
/* BE2 supports only v0 cmd */
|
|
static void *be_erx_stats_from_cmd(struct be_adapter *adapter)
|
|
{
|
|
if (BE2_chip(adapter)) {
|
|
struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
|
|
|
|
return &hw_stats->erx;
|
|
} else if (BE3_chip(adapter)) {
|
|
struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
|
|
|
|
return &hw_stats->erx;
|
|
} else {
|
|
struct be_hw_stats_v2 *hw_stats = hw_stats_from_cmd(adapter);
|
|
|
|
return &hw_stats->erx;
|
|
}
|
|
}
|
|
|
|
static void populate_be_v0_stats(struct be_adapter *adapter)
|
|
{
|
|
struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
|
|
struct be_pmem_stats *pmem_sts = &hw_stats->pmem;
|
|
struct be_rxf_stats_v0 *rxf_stats = &hw_stats->rxf;
|
|
struct be_port_rxf_stats_v0 *port_stats =
|
|
&rxf_stats->port[adapter->port_num];
|
|
struct be_drv_stats *drvs = &adapter->drv_stats;
|
|
|
|
be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats));
|
|
drvs->rx_pause_frames = port_stats->rx_pause_frames;
|
|
drvs->rx_crc_errors = port_stats->rx_crc_errors;
|
|
drvs->rx_control_frames = port_stats->rx_control_frames;
|
|
drvs->rx_in_range_errors = port_stats->rx_in_range_errors;
|
|
drvs->rx_frame_too_long = port_stats->rx_frame_too_long;
|
|
drvs->rx_dropped_runt = port_stats->rx_dropped_runt;
|
|
drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs;
|
|
drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs;
|
|
drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs;
|
|
drvs->rxpp_fifo_overflow_drop = port_stats->rx_fifo_overflow;
|
|
drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length;
|
|
drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small;
|
|
drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short;
|
|
drvs->rx_out_range_errors = port_stats->rx_out_range_errors;
|
|
drvs->rx_input_fifo_overflow_drop = port_stats->rx_input_fifo_overflow;
|
|
drvs->rx_dropped_header_too_small =
|
|
port_stats->rx_dropped_header_too_small;
|
|
drvs->rx_address_filtered =
|
|
port_stats->rx_address_filtered +
|
|
port_stats->rx_vlan_filtered;
|
|
drvs->rx_alignment_symbol_errors =
|
|
port_stats->rx_alignment_symbol_errors;
|
|
|
|
drvs->tx_pauseframes = port_stats->tx_pauseframes;
|
|
drvs->tx_controlframes = port_stats->tx_controlframes;
|
|
|
|
if (adapter->port_num)
|
|
drvs->jabber_events = rxf_stats->port1_jabber_events;
|
|
else
|
|
drvs->jabber_events = rxf_stats->port0_jabber_events;
|
|
drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf;
|
|
drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr;
|
|
drvs->forwarded_packets = rxf_stats->forwarded_packets;
|
|
drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
|
|
drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr;
|
|
drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags;
|
|
adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
|
|
}
|
|
|
|
static void populate_be_v1_stats(struct be_adapter *adapter)
|
|
{
|
|
struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
|
|
struct be_pmem_stats *pmem_sts = &hw_stats->pmem;
|
|
struct be_rxf_stats_v1 *rxf_stats = &hw_stats->rxf;
|
|
struct be_port_rxf_stats_v1 *port_stats =
|
|
&rxf_stats->port[adapter->port_num];
|
|
struct be_drv_stats *drvs = &adapter->drv_stats;
|
|
|
|
be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats));
|
|
drvs->pmem_fifo_overflow_drop = port_stats->pmem_fifo_overflow_drop;
|
|
drvs->rx_priority_pause_frames = port_stats->rx_priority_pause_frames;
|
|
drvs->rx_pause_frames = port_stats->rx_pause_frames;
|
|
drvs->rx_crc_errors = port_stats->rx_crc_errors;
|
|
drvs->rx_control_frames = port_stats->rx_control_frames;
|
|
drvs->rx_in_range_errors = port_stats->rx_in_range_errors;
|
|
drvs->rx_frame_too_long = port_stats->rx_frame_too_long;
|
|
drvs->rx_dropped_runt = port_stats->rx_dropped_runt;
|
|
drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs;
|
|
drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs;
|
|
drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs;
|
|
drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length;
|
|
drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small;
|
|
drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short;
|
|
drvs->rx_out_range_errors = port_stats->rx_out_range_errors;
|
|
drvs->rx_dropped_header_too_small =
|
|
port_stats->rx_dropped_header_too_small;
|
|
drvs->rx_input_fifo_overflow_drop =
|
|
port_stats->rx_input_fifo_overflow_drop;
|
|
drvs->rx_address_filtered = port_stats->rx_address_filtered;
|
|
drvs->rx_alignment_symbol_errors =
|
|
port_stats->rx_alignment_symbol_errors;
|
|
drvs->rxpp_fifo_overflow_drop = port_stats->rxpp_fifo_overflow_drop;
|
|
drvs->tx_pauseframes = port_stats->tx_pauseframes;
|
|
drvs->tx_controlframes = port_stats->tx_controlframes;
|
|
drvs->tx_priority_pauseframes = port_stats->tx_priority_pauseframes;
|
|
drvs->jabber_events = port_stats->jabber_events;
|
|
drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf;
|
|
drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr;
|
|
drvs->forwarded_packets = rxf_stats->forwarded_packets;
|
|
drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
|
|
drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr;
|
|
drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags;
|
|
adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
|
|
}
|
|
|
|
static void populate_be_v2_stats(struct be_adapter *adapter)
|
|
{
|
|
struct be_hw_stats_v2 *hw_stats = hw_stats_from_cmd(adapter);
|
|
struct be_pmem_stats *pmem_sts = &hw_stats->pmem;
|
|
struct be_rxf_stats_v2 *rxf_stats = &hw_stats->rxf;
|
|
struct be_port_rxf_stats_v2 *port_stats =
|
|
&rxf_stats->port[adapter->port_num];
|
|
struct be_drv_stats *drvs = &adapter->drv_stats;
|
|
|
|
be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats));
|
|
drvs->pmem_fifo_overflow_drop = port_stats->pmem_fifo_overflow_drop;
|
|
drvs->rx_priority_pause_frames = port_stats->rx_priority_pause_frames;
|
|
drvs->rx_pause_frames = port_stats->rx_pause_frames;
|
|
drvs->rx_crc_errors = port_stats->rx_crc_errors;
|
|
drvs->rx_control_frames = port_stats->rx_control_frames;
|
|
drvs->rx_in_range_errors = port_stats->rx_in_range_errors;
|
|
drvs->rx_frame_too_long = port_stats->rx_frame_too_long;
|
|
drvs->rx_dropped_runt = port_stats->rx_dropped_runt;
|
|
drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs;
|
|
drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs;
|
|
drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs;
|
|
drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length;
|
|
drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small;
|
|
drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short;
|
|
drvs->rx_out_range_errors = port_stats->rx_out_range_errors;
|
|
drvs->rx_dropped_header_too_small =
|
|
port_stats->rx_dropped_header_too_small;
|
|
drvs->rx_input_fifo_overflow_drop =
|
|
port_stats->rx_input_fifo_overflow_drop;
|
|
drvs->rx_address_filtered = port_stats->rx_address_filtered;
|
|
drvs->rx_alignment_symbol_errors =
|
|
port_stats->rx_alignment_symbol_errors;
|
|
drvs->rxpp_fifo_overflow_drop = port_stats->rxpp_fifo_overflow_drop;
|
|
drvs->tx_pauseframes = port_stats->tx_pauseframes;
|
|
drvs->tx_controlframes = port_stats->tx_controlframes;
|
|
drvs->tx_priority_pauseframes = port_stats->tx_priority_pauseframes;
|
|
drvs->jabber_events = port_stats->jabber_events;
|
|
drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf;
|
|
drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr;
|
|
drvs->forwarded_packets = rxf_stats->forwarded_packets;
|
|
drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
|
|
drvs->rx_drops_no_tpre_descr = rxf_stats->rx_drops_no_tpre_descr;
|
|
drvs->rx_drops_too_many_frags = rxf_stats->rx_drops_too_many_frags;
|
|
adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
|
|
if (be_roce_supported(adapter)) {
|
|
drvs->rx_roce_bytes_lsd = port_stats->roce_bytes_received_lsd;
|
|
drvs->rx_roce_bytes_msd = port_stats->roce_bytes_received_msd;
|
|
drvs->rx_roce_frames = port_stats->roce_frames_received;
|
|
drvs->roce_drops_crc = port_stats->roce_drops_crc;
|
|
drvs->roce_drops_payload_len =
|
|
port_stats->roce_drops_payload_len;
|
|
}
|
|
}
|
|
|
|
static void populate_lancer_stats(struct be_adapter *adapter)
|
|
{
|
|
struct be_drv_stats *drvs = &adapter->drv_stats;
|
|
struct lancer_pport_stats *pport_stats = pport_stats_from_cmd(adapter);
|
|
|
|
be_dws_le_to_cpu(pport_stats, sizeof(*pport_stats));
|
|
drvs->rx_pause_frames = pport_stats->rx_pause_frames_lo;
|
|
drvs->rx_crc_errors = pport_stats->rx_crc_errors_lo;
|
|
drvs->rx_control_frames = pport_stats->rx_control_frames_lo;
|
|
drvs->rx_in_range_errors = pport_stats->rx_in_range_errors;
|
|
drvs->rx_frame_too_long = pport_stats->rx_frames_too_long_lo;
|
|
drvs->rx_dropped_runt = pport_stats->rx_dropped_runt;
|
|
drvs->rx_ip_checksum_errs = pport_stats->rx_ip_checksum_errors;
|
|
drvs->rx_tcp_checksum_errs = pport_stats->rx_tcp_checksum_errors;
|
|
drvs->rx_udp_checksum_errs = pport_stats->rx_udp_checksum_errors;
|
|
drvs->rx_dropped_tcp_length =
|
|
pport_stats->rx_dropped_invalid_tcp_length;
|
|
drvs->rx_dropped_too_small = pport_stats->rx_dropped_too_small;
|
|
drvs->rx_dropped_too_short = pport_stats->rx_dropped_too_short;
|
|
drvs->rx_out_range_errors = pport_stats->rx_out_of_range_errors;
|
|
drvs->rx_dropped_header_too_small =
|
|
pport_stats->rx_dropped_header_too_small;
|
|
drvs->rx_input_fifo_overflow_drop = pport_stats->rx_fifo_overflow;
|
|
drvs->rx_address_filtered =
|
|
pport_stats->rx_address_filtered +
|
|
pport_stats->rx_vlan_filtered;
|
|
drvs->rx_alignment_symbol_errors = pport_stats->rx_symbol_errors_lo;
|
|
drvs->rxpp_fifo_overflow_drop = pport_stats->rx_fifo_overflow;
|
|
drvs->tx_pauseframes = pport_stats->tx_pause_frames_lo;
|
|
drvs->tx_controlframes = pport_stats->tx_control_frames_lo;
|
|
drvs->jabber_events = pport_stats->rx_jabbers;
|
|
drvs->forwarded_packets = pport_stats->num_forwards_lo;
|
|
drvs->rx_drops_mtu = pport_stats->rx_drops_mtu_lo;
|
|
drvs->rx_drops_too_many_frags =
|
|
pport_stats->rx_drops_too_many_frags_lo;
|
|
}
|
|
|
|
static void accumulate_16bit_val(u32 *acc, u16 val)
|
|
{
|
|
#define lo(x) (x & 0xFFFF)
|
|
#define hi(x) (x & 0xFFFF0000)
|
|
bool wrapped = val < lo(*acc);
|
|
u32 newacc = hi(*acc) + val;
|
|
|
|
if (wrapped)
|
|
newacc += 65536;
|
|
ACCESS_ONCE(*acc) = newacc;
|
|
}
|
|
|
|
static void populate_erx_stats(struct be_adapter *adapter,
|
|
struct be_rx_obj *rxo, u32 erx_stat)
|
|
{
|
|
if (!BEx_chip(adapter))
|
|
rx_stats(rxo)->rx_drops_no_frags = erx_stat;
|
|
else
|
|
/* below erx HW counter can actually wrap around after
|
|
* 65535. Driver accumulates a 32-bit value
|
|
*/
|
|
accumulate_16bit_val(&rx_stats(rxo)->rx_drops_no_frags,
|
|
(u16)erx_stat);
|
|
}
|
|
|
|
void be_parse_stats(struct be_adapter *adapter)
|
|
{
|
|
struct be_erx_stats_v2 *erx = be_erx_stats_from_cmd(adapter);
|
|
struct be_rx_obj *rxo;
|
|
int i;
|
|
u32 erx_stat;
|
|
|
|
if (lancer_chip(adapter)) {
|
|
populate_lancer_stats(adapter);
|
|
} else {
|
|
if (BE2_chip(adapter))
|
|
populate_be_v0_stats(adapter);
|
|
else if (BE3_chip(adapter))
|
|
/* for BE3 */
|
|
populate_be_v1_stats(adapter);
|
|
else
|
|
populate_be_v2_stats(adapter);
|
|
|
|
/* erx_v2 is longer than v0, v1. use v2 for v0, v1 access */
|
|
for_all_rx_queues(adapter, rxo, i) {
|
|
erx_stat = erx->rx_drops_no_fragments[rxo->q.id];
|
|
populate_erx_stats(adapter, rxo, erx_stat);
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct rtnl_link_stats64 *be_get_stats64(struct net_device *netdev,
|
|
struct rtnl_link_stats64 *stats)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_drv_stats *drvs = &adapter->drv_stats;
|
|
struct be_rx_obj *rxo;
|
|
struct be_tx_obj *txo;
|
|
u64 pkts, bytes;
|
|
unsigned int start;
|
|
int i;
|
|
|
|
for_all_rx_queues(adapter, rxo, i) {
|
|
const struct be_rx_stats *rx_stats = rx_stats(rxo);
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_irq(&rx_stats->sync);
|
|
pkts = rx_stats(rxo)->rx_pkts;
|
|
bytes = rx_stats(rxo)->rx_bytes;
|
|
} while (u64_stats_fetch_retry_irq(&rx_stats->sync, start));
|
|
stats->rx_packets += pkts;
|
|
stats->rx_bytes += bytes;
|
|
stats->multicast += rx_stats(rxo)->rx_mcast_pkts;
|
|
stats->rx_dropped += rx_stats(rxo)->rx_drops_no_skbs +
|
|
rx_stats(rxo)->rx_drops_no_frags;
|
|
}
|
|
|
|
for_all_tx_queues(adapter, txo, i) {
|
|
const struct be_tx_stats *tx_stats = tx_stats(txo);
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_irq(&tx_stats->sync);
|
|
pkts = tx_stats(txo)->tx_pkts;
|
|
bytes = tx_stats(txo)->tx_bytes;
|
|
} while (u64_stats_fetch_retry_irq(&tx_stats->sync, start));
|
|
stats->tx_packets += pkts;
|
|
stats->tx_bytes += bytes;
|
|
}
|
|
|
|
/* bad pkts received */
|
|
stats->rx_errors = drvs->rx_crc_errors +
|
|
drvs->rx_alignment_symbol_errors +
|
|
drvs->rx_in_range_errors +
|
|
drvs->rx_out_range_errors +
|
|
drvs->rx_frame_too_long +
|
|
drvs->rx_dropped_too_small +
|
|
drvs->rx_dropped_too_short +
|
|
drvs->rx_dropped_header_too_small +
|
|
drvs->rx_dropped_tcp_length +
|
|
drvs->rx_dropped_runt;
|
|
|
|
/* detailed rx errors */
|
|
stats->rx_length_errors = drvs->rx_in_range_errors +
|
|
drvs->rx_out_range_errors +
|
|
drvs->rx_frame_too_long;
|
|
|
|
stats->rx_crc_errors = drvs->rx_crc_errors;
|
|
|
|
/* frame alignment errors */
|
|
stats->rx_frame_errors = drvs->rx_alignment_symbol_errors;
|
|
|
|
/* receiver fifo overrun */
|
|
/* drops_no_pbuf is no per i/f, it's per BE card */
|
|
stats->rx_fifo_errors = drvs->rxpp_fifo_overflow_drop +
|
|
drvs->rx_input_fifo_overflow_drop +
|
|
drvs->rx_drops_no_pbuf;
|
|
return stats;
|
|
}
|
|
|
|
void be_link_status_update(struct be_adapter *adapter, u8 link_status)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
if (!(adapter->flags & BE_FLAGS_LINK_STATUS_INIT)) {
|
|
netif_carrier_off(netdev);
|
|
adapter->flags |= BE_FLAGS_LINK_STATUS_INIT;
|
|
}
|
|
|
|
if (link_status)
|
|
netif_carrier_on(netdev);
|
|
else
|
|
netif_carrier_off(netdev);
|
|
}
|
|
|
|
static void be_tx_stats_update(struct be_tx_obj *txo,
|
|
u32 wrb_cnt, u32 copied, u32 gso_segs,
|
|
bool stopped)
|
|
{
|
|
struct be_tx_stats *stats = tx_stats(txo);
|
|
|
|
u64_stats_update_begin(&stats->sync);
|
|
stats->tx_reqs++;
|
|
stats->tx_wrbs += wrb_cnt;
|
|
stats->tx_bytes += copied;
|
|
stats->tx_pkts += (gso_segs ? gso_segs : 1);
|
|
if (stopped)
|
|
stats->tx_stops++;
|
|
u64_stats_update_end(&stats->sync);
|
|
}
|
|
|
|
/* Determine number of WRB entries needed to xmit data in an skb */
|
|
static u32 wrb_cnt_for_skb(struct be_adapter *adapter, struct sk_buff *skb,
|
|
bool *dummy)
|
|
{
|
|
int cnt = (skb->len > skb->data_len);
|
|
|
|
cnt += skb_shinfo(skb)->nr_frags;
|
|
|
|
/* to account for hdr wrb */
|
|
cnt++;
|
|
if (lancer_chip(adapter) || !(cnt & 1)) {
|
|
*dummy = false;
|
|
} else {
|
|
/* add a dummy to make it an even num */
|
|
cnt++;
|
|
*dummy = true;
|
|
}
|
|
BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT);
|
|
return cnt;
|
|
}
|
|
|
|
static inline void wrb_fill(struct be_eth_wrb *wrb, u64 addr, int len)
|
|
{
|
|
wrb->frag_pa_hi = upper_32_bits(addr);
|
|
wrb->frag_pa_lo = addr & 0xFFFFFFFF;
|
|
wrb->frag_len = len & ETH_WRB_FRAG_LEN_MASK;
|
|
wrb->rsvd0 = 0;
|
|
}
|
|
|
|
static inline u16 be_get_tx_vlan_tag(struct be_adapter *adapter,
|
|
struct sk_buff *skb)
|
|
{
|
|
u8 vlan_prio;
|
|
u16 vlan_tag;
|
|
|
|
vlan_tag = vlan_tx_tag_get(skb);
|
|
vlan_prio = (vlan_tag & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
|
|
/* If vlan priority provided by OS is NOT in available bmap */
|
|
if (!(adapter->vlan_prio_bmap & (1 << vlan_prio)))
|
|
vlan_tag = (vlan_tag & ~VLAN_PRIO_MASK) |
|
|
adapter->recommended_prio;
|
|
|
|
return vlan_tag;
|
|
}
|
|
|
|
/* Used only for IP tunnel packets */
|
|
static u16 skb_inner_ip_proto(struct sk_buff *skb)
|
|
{
|
|
return (inner_ip_hdr(skb)->version == 4) ?
|
|
inner_ip_hdr(skb)->protocol : inner_ipv6_hdr(skb)->nexthdr;
|
|
}
|
|
|
|
static u16 skb_ip_proto(struct sk_buff *skb)
|
|
{
|
|
return (ip_hdr(skb)->version == 4) ?
|
|
ip_hdr(skb)->protocol : ipv6_hdr(skb)->nexthdr;
|
|
}
|
|
|
|
static void wrb_fill_hdr(struct be_adapter *adapter, struct be_eth_hdr_wrb *hdr,
|
|
struct sk_buff *skb, u32 wrb_cnt, u32 len,
|
|
bool skip_hw_vlan)
|
|
{
|
|
u16 vlan_tag, proto;
|
|
|
|
memset(hdr, 0, sizeof(*hdr));
|
|
|
|
SET_TX_WRB_HDR_BITS(crc, hdr, 1);
|
|
|
|
if (skb_is_gso(skb)) {
|
|
SET_TX_WRB_HDR_BITS(lso, hdr, 1);
|
|
SET_TX_WRB_HDR_BITS(lso_mss, hdr, skb_shinfo(skb)->gso_size);
|
|
if (skb_is_gso_v6(skb) && !lancer_chip(adapter))
|
|
SET_TX_WRB_HDR_BITS(lso6, hdr, 1);
|
|
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
|
|
if (skb->encapsulation) {
|
|
SET_TX_WRB_HDR_BITS(ipcs, hdr, 1);
|
|
proto = skb_inner_ip_proto(skb);
|
|
} else {
|
|
proto = skb_ip_proto(skb);
|
|
}
|
|
if (proto == IPPROTO_TCP)
|
|
SET_TX_WRB_HDR_BITS(tcpcs, hdr, 1);
|
|
else if (proto == IPPROTO_UDP)
|
|
SET_TX_WRB_HDR_BITS(udpcs, hdr, 1);
|
|
}
|
|
|
|
if (vlan_tx_tag_present(skb)) {
|
|
SET_TX_WRB_HDR_BITS(vlan, hdr, 1);
|
|
vlan_tag = be_get_tx_vlan_tag(adapter, skb);
|
|
SET_TX_WRB_HDR_BITS(vlan_tag, hdr, vlan_tag);
|
|
}
|
|
|
|
/* To skip HW VLAN tagging: evt = 1, compl = 0 */
|
|
SET_TX_WRB_HDR_BITS(complete, hdr, !skip_hw_vlan);
|
|
SET_TX_WRB_HDR_BITS(event, hdr, 1);
|
|
SET_TX_WRB_HDR_BITS(num_wrb, hdr, wrb_cnt);
|
|
SET_TX_WRB_HDR_BITS(len, hdr, len);
|
|
}
|
|
|
|
static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb,
|
|
bool unmap_single)
|
|
{
|
|
dma_addr_t dma;
|
|
|
|
be_dws_le_to_cpu(wrb, sizeof(*wrb));
|
|
|
|
dma = (u64)wrb->frag_pa_hi << 32 | (u64)wrb->frag_pa_lo;
|
|
if (wrb->frag_len) {
|
|
if (unmap_single)
|
|
dma_unmap_single(dev, dma, wrb->frag_len,
|
|
DMA_TO_DEVICE);
|
|
else
|
|
dma_unmap_page(dev, dma, wrb->frag_len, DMA_TO_DEVICE);
|
|
}
|
|
}
|
|
|
|
static int make_tx_wrbs(struct be_adapter *adapter, struct be_queue_info *txq,
|
|
struct sk_buff *skb, u32 wrb_cnt, bool dummy_wrb,
|
|
bool skip_hw_vlan)
|
|
{
|
|
dma_addr_t busaddr;
|
|
int i, copied = 0;
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct sk_buff *first_skb = skb;
|
|
struct be_eth_wrb *wrb;
|
|
struct be_eth_hdr_wrb *hdr;
|
|
bool map_single = false;
|
|
u16 map_head;
|
|
|
|
hdr = queue_head_node(txq);
|
|
queue_head_inc(txq);
|
|
map_head = txq->head;
|
|
|
|
if (skb->len > skb->data_len) {
|
|
int len = skb_headlen(skb);
|
|
|
|
busaddr = dma_map_single(dev, skb->data, len, DMA_TO_DEVICE);
|
|
if (dma_mapping_error(dev, busaddr))
|
|
goto dma_err;
|
|
map_single = true;
|
|
wrb = queue_head_node(txq);
|
|
wrb_fill(wrb, busaddr, len);
|
|
be_dws_cpu_to_le(wrb, sizeof(*wrb));
|
|
queue_head_inc(txq);
|
|
copied += len;
|
|
}
|
|
|
|
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
|
|
const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
|
|
|
|
busaddr = skb_frag_dma_map(dev, frag, 0,
|
|
skb_frag_size(frag), DMA_TO_DEVICE);
|
|
if (dma_mapping_error(dev, busaddr))
|
|
goto dma_err;
|
|
wrb = queue_head_node(txq);
|
|
wrb_fill(wrb, busaddr, skb_frag_size(frag));
|
|
be_dws_cpu_to_le(wrb, sizeof(*wrb));
|
|
queue_head_inc(txq);
|
|
copied += skb_frag_size(frag);
|
|
}
|
|
|
|
if (dummy_wrb) {
|
|
wrb = queue_head_node(txq);
|
|
wrb_fill(wrb, 0, 0);
|
|
be_dws_cpu_to_le(wrb, sizeof(*wrb));
|
|
queue_head_inc(txq);
|
|
}
|
|
|
|
wrb_fill_hdr(adapter, hdr, first_skb, wrb_cnt, copied, skip_hw_vlan);
|
|
be_dws_cpu_to_le(hdr, sizeof(*hdr));
|
|
|
|
return copied;
|
|
dma_err:
|
|
txq->head = map_head;
|
|
while (copied) {
|
|
wrb = queue_head_node(txq);
|
|
unmap_tx_frag(dev, wrb, map_single);
|
|
map_single = false;
|
|
copied -= wrb->frag_len;
|
|
adapter->drv_stats.dma_map_errors++;
|
|
queue_head_inc(txq);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter,
|
|
struct sk_buff *skb,
|
|
bool *skip_hw_vlan)
|
|
{
|
|
u16 vlan_tag = 0;
|
|
|
|
skb = skb_share_check(skb, GFP_ATOMIC);
|
|
if (unlikely(!skb))
|
|
return skb;
|
|
|
|
if (vlan_tx_tag_present(skb))
|
|
vlan_tag = be_get_tx_vlan_tag(adapter, skb);
|
|
|
|
if (qnq_async_evt_rcvd(adapter) && adapter->pvid) {
|
|
if (!vlan_tag)
|
|
vlan_tag = adapter->pvid;
|
|
/* f/w workaround to set skip_hw_vlan = 1, informs the F/W to
|
|
* skip VLAN insertion
|
|
*/
|
|
if (skip_hw_vlan)
|
|
*skip_hw_vlan = true;
|
|
}
|
|
|
|
if (vlan_tag) {
|
|
skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
|
|
if (unlikely(!skb))
|
|
return skb;
|
|
skb->vlan_tci = 0;
|
|
}
|
|
|
|
/* Insert the outer VLAN, if any */
|
|
if (adapter->qnq_vid) {
|
|
vlan_tag = adapter->qnq_vid;
|
|
skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
|
|
if (unlikely(!skb))
|
|
return skb;
|
|
if (skip_hw_vlan)
|
|
*skip_hw_vlan = true;
|
|
}
|
|
|
|
return skb;
|
|
}
|
|
|
|
static bool be_ipv6_exthdr_check(struct sk_buff *skb)
|
|
{
|
|
struct ethhdr *eh = (struct ethhdr *)skb->data;
|
|
u16 offset = ETH_HLEN;
|
|
|
|
if (eh->h_proto == htons(ETH_P_IPV6)) {
|
|
struct ipv6hdr *ip6h = (struct ipv6hdr *)(skb->data + offset);
|
|
|
|
offset += sizeof(struct ipv6hdr);
|
|
if (ip6h->nexthdr != NEXTHDR_TCP &&
|
|
ip6h->nexthdr != NEXTHDR_UDP) {
|
|
struct ipv6_opt_hdr *ehdr =
|
|
(struct ipv6_opt_hdr *)(skb->data + offset);
|
|
|
|
/* offending pkt: 2nd byte following IPv6 hdr is 0xff */
|
|
if (ehdr->hdrlen == 0xff)
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int be_vlan_tag_tx_chk(struct be_adapter *adapter, struct sk_buff *skb)
|
|
{
|
|
return vlan_tx_tag_present(skb) || adapter->pvid || adapter->qnq_vid;
|
|
}
|
|
|
|
static int be_ipv6_tx_stall_chk(struct be_adapter *adapter, struct sk_buff *skb)
|
|
{
|
|
return BE3_chip(adapter) && be_ipv6_exthdr_check(skb);
|
|
}
|
|
|
|
static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter,
|
|
struct sk_buff *skb,
|
|
bool *skip_hw_vlan)
|
|
{
|
|
struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
|
|
unsigned int eth_hdr_len;
|
|
struct iphdr *ip;
|
|
|
|
/* For padded packets, BE HW modifies tot_len field in IP header
|
|
* incorrecly when VLAN tag is inserted by HW.
|
|
* For padded packets, Lancer computes incorrect checksum.
|
|
*/
|
|
eth_hdr_len = ntohs(skb->protocol) == ETH_P_8021Q ?
|
|
VLAN_ETH_HLEN : ETH_HLEN;
|
|
if (skb->len <= 60 &&
|
|
(lancer_chip(adapter) || vlan_tx_tag_present(skb)) &&
|
|
is_ipv4_pkt(skb)) {
|
|
ip = (struct iphdr *)ip_hdr(skb);
|
|
pskb_trim(skb, eth_hdr_len + ntohs(ip->tot_len));
|
|
}
|
|
|
|
/* If vlan tag is already inlined in the packet, skip HW VLAN
|
|
* tagging in pvid-tagging mode
|
|
*/
|
|
if (be_pvid_tagging_enabled(adapter) &&
|
|
veh->h_vlan_proto == htons(ETH_P_8021Q))
|
|
*skip_hw_vlan = true;
|
|
|
|
/* HW has a bug wherein it will calculate CSUM for VLAN
|
|
* pkts even though it is disabled.
|
|
* Manually insert VLAN in pkt.
|
|
*/
|
|
if (skb->ip_summed != CHECKSUM_PARTIAL &&
|
|
vlan_tx_tag_present(skb)) {
|
|
skb = be_insert_vlan_in_pkt(adapter, skb, skip_hw_vlan);
|
|
if (unlikely(!skb))
|
|
goto err;
|
|
}
|
|
|
|
/* HW may lockup when VLAN HW tagging is requested on
|
|
* certain ipv6 packets. Drop such pkts if the HW workaround to
|
|
* skip HW tagging is not enabled by FW.
|
|
*/
|
|
if (unlikely(be_ipv6_tx_stall_chk(adapter, skb) &&
|
|
(adapter->pvid || adapter->qnq_vid) &&
|
|
!qnq_async_evt_rcvd(adapter)))
|
|
goto tx_drop;
|
|
|
|
/* Manual VLAN tag insertion to prevent:
|
|
* ASIC lockup when the ASIC inserts VLAN tag into
|
|
* certain ipv6 packets. Insert VLAN tags in driver,
|
|
* and set event, completion, vlan bits accordingly
|
|
* in the Tx WRB.
|
|
*/
|
|
if (be_ipv6_tx_stall_chk(adapter, skb) &&
|
|
be_vlan_tag_tx_chk(adapter, skb)) {
|
|
skb = be_insert_vlan_in_pkt(adapter, skb, skip_hw_vlan);
|
|
if (unlikely(!skb))
|
|
goto err;
|
|
}
|
|
|
|
return skb;
|
|
tx_drop:
|
|
dev_kfree_skb_any(skb);
|
|
err:
|
|
return NULL;
|
|
}
|
|
|
|
static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter,
|
|
struct sk_buff *skb,
|
|
bool *skip_hw_vlan)
|
|
{
|
|
/* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or
|
|
* less may cause a transmit stall on that port. So the work-around is
|
|
* to pad short packets (<= 32 bytes) to a 36-byte length.
|
|
*/
|
|
if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) {
|
|
if (skb_padto(skb, 36))
|
|
return NULL;
|
|
skb->len = 36;
|
|
}
|
|
|
|
if (BEx_chip(adapter) || lancer_chip(adapter)) {
|
|
skb = be_lancer_xmit_workarounds(adapter, skb, skip_hw_vlan);
|
|
if (!skb)
|
|
return NULL;
|
|
}
|
|
|
|
return skb;
|
|
}
|
|
|
|
static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_tx_obj *txo = &adapter->tx_obj[skb_get_queue_mapping(skb)];
|
|
struct be_queue_info *txq = &txo->q;
|
|
bool dummy_wrb, stopped = false;
|
|
u32 wrb_cnt = 0, copied = 0;
|
|
bool skip_hw_vlan = false;
|
|
u32 start = txq->head;
|
|
|
|
skb = be_xmit_workarounds(adapter, skb, &skip_hw_vlan);
|
|
if (!skb) {
|
|
tx_stats(txo)->tx_drv_drops++;
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
wrb_cnt = wrb_cnt_for_skb(adapter, skb, &dummy_wrb);
|
|
|
|
copied = make_tx_wrbs(adapter, txq, skb, wrb_cnt, dummy_wrb,
|
|
skip_hw_vlan);
|
|
if (copied) {
|
|
int gso_segs = skb_shinfo(skb)->gso_segs;
|
|
|
|
/* record the sent skb in the sent_skb table */
|
|
BUG_ON(txo->sent_skb_list[start]);
|
|
txo->sent_skb_list[start] = skb;
|
|
|
|
/* Ensure txq has space for the next skb; Else stop the queue
|
|
* *BEFORE* ringing the tx doorbell, so that we serialze the
|
|
* tx compls of the current transmit which'll wake up the queue
|
|
*/
|
|
atomic_add(wrb_cnt, &txq->used);
|
|
if ((BE_MAX_TX_FRAG_COUNT + atomic_read(&txq->used)) >=
|
|
txq->len) {
|
|
netif_stop_subqueue(netdev, skb_get_queue_mapping(skb));
|
|
stopped = true;
|
|
}
|
|
|
|
be_txq_notify(adapter, txo, wrb_cnt);
|
|
|
|
be_tx_stats_update(txo, wrb_cnt, copied, gso_segs, stopped);
|
|
} else {
|
|
txq->head = start;
|
|
tx_stats(txo)->tx_drv_drops++;
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int be_change_mtu(struct net_device *netdev, int new_mtu)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct device *dev = &adapter->pdev->dev;
|
|
|
|
if (new_mtu < BE_MIN_MTU || new_mtu > BE_MAX_MTU) {
|
|
dev_info(dev, "MTU must be between %d and %d bytes\n",
|
|
BE_MIN_MTU, BE_MAX_MTU);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_info(dev, "MTU changed from %d to %d bytes\n",
|
|
netdev->mtu, new_mtu);
|
|
netdev->mtu = new_mtu;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* A max of 64 (BE_NUM_VLANS_SUPPORTED) vlans can be configured in BE.
|
|
* If the user configures more, place BE in vlan promiscuous mode.
|
|
*/
|
|
static int be_vid_config(struct be_adapter *adapter)
|
|
{
|
|
struct device *dev = &adapter->pdev->dev;
|
|
u16 vids[BE_NUM_VLANS_SUPPORTED];
|
|
u16 num = 0, i = 0;
|
|
int status = 0;
|
|
|
|
/* No need to further configure vids if in promiscuous mode */
|
|
if (adapter->promiscuous)
|
|
return 0;
|
|
|
|
if (adapter->vlans_added > be_max_vlans(adapter))
|
|
goto set_vlan_promisc;
|
|
|
|
/* Construct VLAN Table to give to HW */
|
|
for_each_set_bit(i, adapter->vids, VLAN_N_VID)
|
|
vids[num++] = cpu_to_le16(i);
|
|
|
|
status = be_cmd_vlan_config(adapter, adapter->if_handle, vids, num);
|
|
if (status) {
|
|
/* Set to VLAN promisc mode as setting VLAN filter failed */
|
|
if (addl_status(status) ==
|
|
MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES)
|
|
goto set_vlan_promisc;
|
|
dev_err(dev, "Setting HW VLAN filtering failed\n");
|
|
} else {
|
|
if (adapter->flags & BE_FLAGS_VLAN_PROMISC) {
|
|
/* hw VLAN filtering re-enabled. */
|
|
status = be_cmd_rx_filter(adapter,
|
|
BE_FLAGS_VLAN_PROMISC, OFF);
|
|
if (!status) {
|
|
dev_info(dev,
|
|
"Disabling VLAN Promiscuous mode\n");
|
|
adapter->flags &= ~BE_FLAGS_VLAN_PROMISC;
|
|
}
|
|
}
|
|
}
|
|
|
|
return status;
|
|
|
|
set_vlan_promisc:
|
|
if (adapter->flags & BE_FLAGS_VLAN_PROMISC)
|
|
return 0;
|
|
|
|
status = be_cmd_rx_filter(adapter, BE_FLAGS_VLAN_PROMISC, ON);
|
|
if (!status) {
|
|
dev_info(dev, "Enable VLAN Promiscuous mode\n");
|
|
adapter->flags |= BE_FLAGS_VLAN_PROMISC;
|
|
} else
|
|
dev_err(dev, "Failed to enable VLAN Promiscuous mode\n");
|
|
return status;
|
|
}
|
|
|
|
static int be_vlan_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
int status = 0;
|
|
|
|
/* Packets with VID 0 are always received by Lancer by default */
|
|
if (lancer_chip(adapter) && vid == 0)
|
|
return status;
|
|
|
|
if (test_bit(vid, adapter->vids))
|
|
return status;
|
|
|
|
set_bit(vid, adapter->vids);
|
|
adapter->vlans_added++;
|
|
|
|
status = be_vid_config(adapter);
|
|
if (status) {
|
|
adapter->vlans_added--;
|
|
clear_bit(vid, adapter->vids);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static int be_vlan_rem_vid(struct net_device *netdev, __be16 proto, u16 vid)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
/* Packets with VID 0 are always received by Lancer by default */
|
|
if (lancer_chip(adapter) && vid == 0)
|
|
return 0;
|
|
|
|
clear_bit(vid, adapter->vids);
|
|
adapter->vlans_added--;
|
|
|
|
return be_vid_config(adapter);
|
|
}
|
|
|
|
static void be_clear_promisc(struct be_adapter *adapter)
|
|
{
|
|
adapter->promiscuous = false;
|
|
adapter->flags &= ~(BE_FLAGS_VLAN_PROMISC | BE_FLAGS_MCAST_PROMISC);
|
|
|
|
be_cmd_rx_filter(adapter, IFF_PROMISC, OFF);
|
|
}
|
|
|
|
static void be_set_rx_mode(struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
int status;
|
|
|
|
if (netdev->flags & IFF_PROMISC) {
|
|
be_cmd_rx_filter(adapter, IFF_PROMISC, ON);
|
|
adapter->promiscuous = true;
|
|
goto done;
|
|
}
|
|
|
|
/* BE was previously in promiscuous mode; disable it */
|
|
if (adapter->promiscuous) {
|
|
be_clear_promisc(adapter);
|
|
if (adapter->vlans_added)
|
|
be_vid_config(adapter);
|
|
}
|
|
|
|
/* Enable multicast promisc if num configured exceeds what we support */
|
|
if (netdev->flags & IFF_ALLMULTI ||
|
|
netdev_mc_count(netdev) > be_max_mc(adapter))
|
|
goto set_mcast_promisc;
|
|
|
|
if (netdev_uc_count(netdev) != adapter->uc_macs) {
|
|
struct netdev_hw_addr *ha;
|
|
int i = 1; /* First slot is claimed by the Primary MAC */
|
|
|
|
for (; adapter->uc_macs > 0; adapter->uc_macs--, i++) {
|
|
be_cmd_pmac_del(adapter, adapter->if_handle,
|
|
adapter->pmac_id[i], 0);
|
|
}
|
|
|
|
if (netdev_uc_count(netdev) > be_max_uc(adapter)) {
|
|
be_cmd_rx_filter(adapter, IFF_PROMISC, ON);
|
|
adapter->promiscuous = true;
|
|
goto done;
|
|
}
|
|
|
|
netdev_for_each_uc_addr(ha, adapter->netdev) {
|
|
adapter->uc_macs++; /* First slot is for Primary MAC */
|
|
be_cmd_pmac_add(adapter, (u8 *)ha->addr,
|
|
adapter->if_handle,
|
|
&adapter->pmac_id[adapter->uc_macs], 0);
|
|
}
|
|
}
|
|
|
|
status = be_cmd_rx_filter(adapter, IFF_MULTICAST, ON);
|
|
if (!status) {
|
|
if (adapter->flags & BE_FLAGS_MCAST_PROMISC)
|
|
adapter->flags &= ~BE_FLAGS_MCAST_PROMISC;
|
|
goto done;
|
|
}
|
|
|
|
set_mcast_promisc:
|
|
if (adapter->flags & BE_FLAGS_MCAST_PROMISC)
|
|
return;
|
|
|
|
/* Set to MCAST promisc mode if setting MULTICAST address fails
|
|
* or if num configured exceeds what we support
|
|
*/
|
|
status = be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON);
|
|
if (!status)
|
|
adapter->flags |= BE_FLAGS_MCAST_PROMISC;
|
|
done:
|
|
return;
|
|
}
|
|
|
|
static int be_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
|
|
int status;
|
|
|
|
if (!sriov_enabled(adapter))
|
|
return -EPERM;
|
|
|
|
if (!is_valid_ether_addr(mac) || vf >= adapter->num_vfs)
|
|
return -EINVAL;
|
|
|
|
/* Proceed further only if user provided MAC is different
|
|
* from active MAC
|
|
*/
|
|
if (ether_addr_equal(mac, vf_cfg->mac_addr))
|
|
return 0;
|
|
|
|
if (BEx_chip(adapter)) {
|
|
be_cmd_pmac_del(adapter, vf_cfg->if_handle, vf_cfg->pmac_id,
|
|
vf + 1);
|
|
|
|
status = be_cmd_pmac_add(adapter, mac, vf_cfg->if_handle,
|
|
&vf_cfg->pmac_id, vf + 1);
|
|
} else {
|
|
status = be_cmd_set_mac(adapter, mac, vf_cfg->if_handle,
|
|
vf + 1);
|
|
}
|
|
|
|
if (status) {
|
|
dev_err(&adapter->pdev->dev, "MAC %pM set on VF %d Failed: %#x",
|
|
mac, vf, status);
|
|
return be_cmd_status(status);
|
|
}
|
|
|
|
ether_addr_copy(vf_cfg->mac_addr, mac);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int be_get_vf_config(struct net_device *netdev, int vf,
|
|
struct ifla_vf_info *vi)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
|
|
|
|
if (!sriov_enabled(adapter))
|
|
return -EPERM;
|
|
|
|
if (vf >= adapter->num_vfs)
|
|
return -EINVAL;
|
|
|
|
vi->vf = vf;
|
|
vi->max_tx_rate = vf_cfg->tx_rate;
|
|
vi->min_tx_rate = 0;
|
|
vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK;
|
|
vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT;
|
|
memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN);
|
|
vi->linkstate = adapter->vf_cfg[vf].plink_tracking;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
|
|
int status = 0;
|
|
|
|
if (!sriov_enabled(adapter))
|
|
return -EPERM;
|
|
|
|
if (vf >= adapter->num_vfs || vlan > 4095 || qos > 7)
|
|
return -EINVAL;
|
|
|
|
if (vlan || qos) {
|
|
vlan |= qos << VLAN_PRIO_SHIFT;
|
|
if (vf_cfg->vlan_tag != vlan)
|
|
status = be_cmd_set_hsw_config(adapter, vlan, vf + 1,
|
|
vf_cfg->if_handle, 0);
|
|
} else {
|
|
/* Reset Transparent Vlan Tagging. */
|
|
status = be_cmd_set_hsw_config(adapter, BE_RESET_VLAN_TAG_ID,
|
|
vf + 1, vf_cfg->if_handle, 0);
|
|
}
|
|
|
|
if (status) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"VLAN %d config on VF %d failed : %#x\n", vlan,
|
|
vf, status);
|
|
return be_cmd_status(status);
|
|
}
|
|
|
|
vf_cfg->vlan_tag = vlan;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
|
|
int min_tx_rate, int max_tx_rate)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct device *dev = &adapter->pdev->dev;
|
|
int percent_rate, status = 0;
|
|
u16 link_speed = 0;
|
|
u8 link_status;
|
|
|
|
if (!sriov_enabled(adapter))
|
|
return -EPERM;
|
|
|
|
if (vf >= adapter->num_vfs)
|
|
return -EINVAL;
|
|
|
|
if (min_tx_rate)
|
|
return -EINVAL;
|
|
|
|
if (!max_tx_rate)
|
|
goto config_qos;
|
|
|
|
status = be_cmd_link_status_query(adapter, &link_speed,
|
|
&link_status, 0);
|
|
if (status)
|
|
goto err;
|
|
|
|
if (!link_status) {
|
|
dev_err(dev, "TX-rate setting not allowed when link is down\n");
|
|
status = -ENETDOWN;
|
|
goto err;
|
|
}
|
|
|
|
if (max_tx_rate < 100 || max_tx_rate > link_speed) {
|
|
dev_err(dev, "TX-rate must be between 100 and %d Mbps\n",
|
|
link_speed);
|
|
status = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* On Skyhawk the QOS setting must be done only as a % value */
|
|
percent_rate = link_speed / 100;
|
|
if (skyhawk_chip(adapter) && (max_tx_rate % percent_rate)) {
|
|
dev_err(dev, "TX-rate must be a multiple of %d Mbps\n",
|
|
percent_rate);
|
|
status = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
config_qos:
|
|
status = be_cmd_config_qos(adapter, max_tx_rate, link_speed, vf + 1);
|
|
if (status)
|
|
goto err;
|
|
|
|
adapter->vf_cfg[vf].tx_rate = max_tx_rate;
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(dev, "TX-rate setting of %dMbps on VF%d failed\n",
|
|
max_tx_rate, vf);
|
|
return be_cmd_status(status);
|
|
}
|
|
|
|
static int be_set_vf_link_state(struct net_device *netdev, int vf,
|
|
int link_state)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
int status;
|
|
|
|
if (!sriov_enabled(adapter))
|
|
return -EPERM;
|
|
|
|
if (vf >= adapter->num_vfs)
|
|
return -EINVAL;
|
|
|
|
status = be_cmd_set_logical_link_config(adapter, link_state, vf+1);
|
|
if (status) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"Link state change on VF %d failed: %#x\n", vf, status);
|
|
return be_cmd_status(status);
|
|
}
|
|
|
|
adapter->vf_cfg[vf].plink_tracking = link_state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void be_aic_update(struct be_aic_obj *aic, u64 rx_pkts, u64 tx_pkts,
|
|
ulong now)
|
|
{
|
|
aic->rx_pkts_prev = rx_pkts;
|
|
aic->tx_reqs_prev = tx_pkts;
|
|
aic->jiffies = now;
|
|
}
|
|
|
|
static void be_eqd_update(struct be_adapter *adapter)
|
|
{
|
|
struct be_set_eqd set_eqd[MAX_EVT_QS];
|
|
int eqd, i, num = 0, start;
|
|
struct be_aic_obj *aic;
|
|
struct be_eq_obj *eqo;
|
|
struct be_rx_obj *rxo;
|
|
struct be_tx_obj *txo;
|
|
u64 rx_pkts, tx_pkts;
|
|
ulong now;
|
|
u32 pps, delta;
|
|
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
aic = &adapter->aic_obj[eqo->idx];
|
|
if (!aic->enable) {
|
|
if (aic->jiffies)
|
|
aic->jiffies = 0;
|
|
eqd = aic->et_eqd;
|
|
goto modify_eqd;
|
|
}
|
|
|
|
rxo = &adapter->rx_obj[eqo->idx];
|
|
do {
|
|
start = u64_stats_fetch_begin_irq(&rxo->stats.sync);
|
|
rx_pkts = rxo->stats.rx_pkts;
|
|
} while (u64_stats_fetch_retry_irq(&rxo->stats.sync, start));
|
|
|
|
txo = &adapter->tx_obj[eqo->idx];
|
|
do {
|
|
start = u64_stats_fetch_begin_irq(&txo->stats.sync);
|
|
tx_pkts = txo->stats.tx_reqs;
|
|
} while (u64_stats_fetch_retry_irq(&txo->stats.sync, start));
|
|
|
|
/* Skip, if wrapped around or first calculation */
|
|
now = jiffies;
|
|
if (!aic->jiffies || time_before(now, aic->jiffies) ||
|
|
rx_pkts < aic->rx_pkts_prev ||
|
|
tx_pkts < aic->tx_reqs_prev) {
|
|
be_aic_update(aic, rx_pkts, tx_pkts, now);
|
|
continue;
|
|
}
|
|
|
|
delta = jiffies_to_msecs(now - aic->jiffies);
|
|
pps = (((u32)(rx_pkts - aic->rx_pkts_prev) * 1000) / delta) +
|
|
(((u32)(tx_pkts - aic->tx_reqs_prev) * 1000) / delta);
|
|
eqd = (pps / 15000) << 2;
|
|
|
|
if (eqd < 8)
|
|
eqd = 0;
|
|
eqd = min_t(u32, eqd, aic->max_eqd);
|
|
eqd = max_t(u32, eqd, aic->min_eqd);
|
|
|
|
be_aic_update(aic, rx_pkts, tx_pkts, now);
|
|
modify_eqd:
|
|
if (eqd != aic->prev_eqd) {
|
|
set_eqd[num].delay_multiplier = (eqd * 65)/100;
|
|
set_eqd[num].eq_id = eqo->q.id;
|
|
aic->prev_eqd = eqd;
|
|
num++;
|
|
}
|
|
}
|
|
|
|
if (num)
|
|
be_cmd_modify_eqd(adapter, set_eqd, num);
|
|
}
|
|
|
|
static void be_rx_stats_update(struct be_rx_obj *rxo,
|
|
struct be_rx_compl_info *rxcp)
|
|
{
|
|
struct be_rx_stats *stats = rx_stats(rxo);
|
|
|
|
u64_stats_update_begin(&stats->sync);
|
|
stats->rx_compl++;
|
|
stats->rx_bytes += rxcp->pkt_size;
|
|
stats->rx_pkts++;
|
|
if (rxcp->pkt_type == BE_MULTICAST_PACKET)
|
|
stats->rx_mcast_pkts++;
|
|
if (rxcp->err)
|
|
stats->rx_compl_err++;
|
|
u64_stats_update_end(&stats->sync);
|
|
}
|
|
|
|
static inline bool csum_passed(struct be_rx_compl_info *rxcp)
|
|
{
|
|
/* L4 checksum is not reliable for non TCP/UDP packets.
|
|
* Also ignore ipcksm for ipv6 pkts
|
|
*/
|
|
return (rxcp->tcpf || rxcp->udpf) && rxcp->l4_csum &&
|
|
(rxcp->ip_csum || rxcp->ipv6) && !rxcp->err;
|
|
}
|
|
|
|
static struct be_rx_page_info *get_rx_page_info(struct be_rx_obj *rxo)
|
|
{
|
|
struct be_adapter *adapter = rxo->adapter;
|
|
struct be_rx_page_info *rx_page_info;
|
|
struct be_queue_info *rxq = &rxo->q;
|
|
u16 frag_idx = rxq->tail;
|
|
|
|
rx_page_info = &rxo->page_info_tbl[frag_idx];
|
|
BUG_ON(!rx_page_info->page);
|
|
|
|
if (rx_page_info->last_frag) {
|
|
dma_unmap_page(&adapter->pdev->dev,
|
|
dma_unmap_addr(rx_page_info, bus),
|
|
adapter->big_page_size, DMA_FROM_DEVICE);
|
|
rx_page_info->last_frag = false;
|
|
} else {
|
|
dma_sync_single_for_cpu(&adapter->pdev->dev,
|
|
dma_unmap_addr(rx_page_info, bus),
|
|
rx_frag_size, DMA_FROM_DEVICE);
|
|
}
|
|
|
|
queue_tail_inc(rxq);
|
|
atomic_dec(&rxq->used);
|
|
return rx_page_info;
|
|
}
|
|
|
|
/* Throwaway the data in the Rx completion */
|
|
static void be_rx_compl_discard(struct be_rx_obj *rxo,
|
|
struct be_rx_compl_info *rxcp)
|
|
{
|
|
struct be_rx_page_info *page_info;
|
|
u16 i, num_rcvd = rxcp->num_rcvd;
|
|
|
|
for (i = 0; i < num_rcvd; i++) {
|
|
page_info = get_rx_page_info(rxo);
|
|
put_page(page_info->page);
|
|
memset(page_info, 0, sizeof(*page_info));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* skb_fill_rx_data forms a complete skb for an ether frame
|
|
* indicated by rxcp.
|
|
*/
|
|
static void skb_fill_rx_data(struct be_rx_obj *rxo, struct sk_buff *skb,
|
|
struct be_rx_compl_info *rxcp)
|
|
{
|
|
struct be_rx_page_info *page_info;
|
|
u16 i, j;
|
|
u16 hdr_len, curr_frag_len, remaining;
|
|
u8 *start;
|
|
|
|
page_info = get_rx_page_info(rxo);
|
|
start = page_address(page_info->page) + page_info->page_offset;
|
|
prefetch(start);
|
|
|
|
/* Copy data in the first descriptor of this completion */
|
|
curr_frag_len = min(rxcp->pkt_size, rx_frag_size);
|
|
|
|
skb->len = curr_frag_len;
|
|
if (curr_frag_len <= BE_HDR_LEN) { /* tiny packet */
|
|
memcpy(skb->data, start, curr_frag_len);
|
|
/* Complete packet has now been moved to data */
|
|
put_page(page_info->page);
|
|
skb->data_len = 0;
|
|
skb->tail += curr_frag_len;
|
|
} else {
|
|
hdr_len = ETH_HLEN;
|
|
memcpy(skb->data, start, hdr_len);
|
|
skb_shinfo(skb)->nr_frags = 1;
|
|
skb_frag_set_page(skb, 0, page_info->page);
|
|
skb_shinfo(skb)->frags[0].page_offset =
|
|
page_info->page_offset + hdr_len;
|
|
skb_frag_size_set(&skb_shinfo(skb)->frags[0],
|
|
curr_frag_len - hdr_len);
|
|
skb->data_len = curr_frag_len - hdr_len;
|
|
skb->truesize += rx_frag_size;
|
|
skb->tail += hdr_len;
|
|
}
|
|
page_info->page = NULL;
|
|
|
|
if (rxcp->pkt_size <= rx_frag_size) {
|
|
BUG_ON(rxcp->num_rcvd != 1);
|
|
return;
|
|
}
|
|
|
|
/* More frags present for this completion */
|
|
remaining = rxcp->pkt_size - curr_frag_len;
|
|
for (i = 1, j = 0; i < rxcp->num_rcvd; i++) {
|
|
page_info = get_rx_page_info(rxo);
|
|
curr_frag_len = min(remaining, rx_frag_size);
|
|
|
|
/* Coalesce all frags from the same physical page in one slot */
|
|
if (page_info->page_offset == 0) {
|
|
/* Fresh page */
|
|
j++;
|
|
skb_frag_set_page(skb, j, page_info->page);
|
|
skb_shinfo(skb)->frags[j].page_offset =
|
|
page_info->page_offset;
|
|
skb_frag_size_set(&skb_shinfo(skb)->frags[j], 0);
|
|
skb_shinfo(skb)->nr_frags++;
|
|
} else {
|
|
put_page(page_info->page);
|
|
}
|
|
|
|
skb_frag_size_add(&skb_shinfo(skb)->frags[j], curr_frag_len);
|
|
skb->len += curr_frag_len;
|
|
skb->data_len += curr_frag_len;
|
|
skb->truesize += rx_frag_size;
|
|
remaining -= curr_frag_len;
|
|
page_info->page = NULL;
|
|
}
|
|
BUG_ON(j > MAX_SKB_FRAGS);
|
|
}
|
|
|
|
/* Process the RX completion indicated by rxcp when GRO is disabled */
|
|
static void be_rx_compl_process(struct be_rx_obj *rxo, struct napi_struct *napi,
|
|
struct be_rx_compl_info *rxcp)
|
|
{
|
|
struct be_adapter *adapter = rxo->adapter;
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct sk_buff *skb;
|
|
|
|
skb = netdev_alloc_skb_ip_align(netdev, BE_RX_SKB_ALLOC_SIZE);
|
|
if (unlikely(!skb)) {
|
|
rx_stats(rxo)->rx_drops_no_skbs++;
|
|
be_rx_compl_discard(rxo, rxcp);
|
|
return;
|
|
}
|
|
|
|
skb_fill_rx_data(rxo, skb, rxcp);
|
|
|
|
if (likely((netdev->features & NETIF_F_RXCSUM) && csum_passed(rxcp)))
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
else
|
|
skb_checksum_none_assert(skb);
|
|
|
|
skb->protocol = eth_type_trans(skb, netdev);
|
|
skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]);
|
|
if (netdev->features & NETIF_F_RXHASH)
|
|
skb_set_hash(skb, rxcp->rss_hash, PKT_HASH_TYPE_L3);
|
|
|
|
skb->csum_level = rxcp->tunneled;
|
|
skb_mark_napi_id(skb, napi);
|
|
|
|
if (rxcp->vlanf)
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rxcp->vlan_tag);
|
|
|
|
netif_receive_skb(skb);
|
|
}
|
|
|
|
/* Process the RX completion indicated by rxcp when GRO is enabled */
|
|
static void be_rx_compl_process_gro(struct be_rx_obj *rxo,
|
|
struct napi_struct *napi,
|
|
struct be_rx_compl_info *rxcp)
|
|
{
|
|
struct be_adapter *adapter = rxo->adapter;
|
|
struct be_rx_page_info *page_info;
|
|
struct sk_buff *skb = NULL;
|
|
u16 remaining, curr_frag_len;
|
|
u16 i, j;
|
|
|
|
skb = napi_get_frags(napi);
|
|
if (!skb) {
|
|
be_rx_compl_discard(rxo, rxcp);
|
|
return;
|
|
}
|
|
|
|
remaining = rxcp->pkt_size;
|
|
for (i = 0, j = -1; i < rxcp->num_rcvd; i++) {
|
|
page_info = get_rx_page_info(rxo);
|
|
|
|
curr_frag_len = min(remaining, rx_frag_size);
|
|
|
|
/* Coalesce all frags from the same physical page in one slot */
|
|
if (i == 0 || page_info->page_offset == 0) {
|
|
/* First frag or Fresh page */
|
|
j++;
|
|
skb_frag_set_page(skb, j, page_info->page);
|
|
skb_shinfo(skb)->frags[j].page_offset =
|
|
page_info->page_offset;
|
|
skb_frag_size_set(&skb_shinfo(skb)->frags[j], 0);
|
|
} else {
|
|
put_page(page_info->page);
|
|
}
|
|
skb_frag_size_add(&skb_shinfo(skb)->frags[j], curr_frag_len);
|
|
skb->truesize += rx_frag_size;
|
|
remaining -= curr_frag_len;
|
|
memset(page_info, 0, sizeof(*page_info));
|
|
}
|
|
BUG_ON(j > MAX_SKB_FRAGS);
|
|
|
|
skb_shinfo(skb)->nr_frags = j + 1;
|
|
skb->len = rxcp->pkt_size;
|
|
skb->data_len = rxcp->pkt_size;
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
skb_record_rx_queue(skb, rxo - &adapter->rx_obj[0]);
|
|
if (adapter->netdev->features & NETIF_F_RXHASH)
|
|
skb_set_hash(skb, rxcp->rss_hash, PKT_HASH_TYPE_L3);
|
|
|
|
skb->csum_level = rxcp->tunneled;
|
|
skb_mark_napi_id(skb, napi);
|
|
|
|
if (rxcp->vlanf)
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rxcp->vlan_tag);
|
|
|
|
napi_gro_frags(napi);
|
|
}
|
|
|
|
static void be_parse_rx_compl_v1(struct be_eth_rx_compl *compl,
|
|
struct be_rx_compl_info *rxcp)
|
|
{
|
|
rxcp->pkt_size = GET_RX_COMPL_V1_BITS(pktsize, compl);
|
|
rxcp->vlanf = GET_RX_COMPL_V1_BITS(vtp, compl);
|
|
rxcp->err = GET_RX_COMPL_V1_BITS(err, compl);
|
|
rxcp->tcpf = GET_RX_COMPL_V1_BITS(tcpf, compl);
|
|
rxcp->udpf = GET_RX_COMPL_V1_BITS(udpf, compl);
|
|
rxcp->ip_csum = GET_RX_COMPL_V1_BITS(ipcksm, compl);
|
|
rxcp->l4_csum = GET_RX_COMPL_V1_BITS(l4_cksm, compl);
|
|
rxcp->ipv6 = GET_RX_COMPL_V1_BITS(ip_version, compl);
|
|
rxcp->num_rcvd = GET_RX_COMPL_V1_BITS(numfrags, compl);
|
|
rxcp->pkt_type = GET_RX_COMPL_V1_BITS(cast_enc, compl);
|
|
rxcp->rss_hash = GET_RX_COMPL_V1_BITS(rsshash, compl);
|
|
if (rxcp->vlanf) {
|
|
rxcp->qnq = GET_RX_COMPL_V1_BITS(qnq, compl);
|
|
rxcp->vlan_tag = GET_RX_COMPL_V1_BITS(vlan_tag, compl);
|
|
}
|
|
rxcp->port = GET_RX_COMPL_V1_BITS(port, compl);
|
|
rxcp->tunneled =
|
|
GET_RX_COMPL_V1_BITS(tunneled, compl);
|
|
}
|
|
|
|
static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl,
|
|
struct be_rx_compl_info *rxcp)
|
|
{
|
|
rxcp->pkt_size = GET_RX_COMPL_V0_BITS(pktsize, compl);
|
|
rxcp->vlanf = GET_RX_COMPL_V0_BITS(vtp, compl);
|
|
rxcp->err = GET_RX_COMPL_V0_BITS(err, compl);
|
|
rxcp->tcpf = GET_RX_COMPL_V0_BITS(tcpf, compl);
|
|
rxcp->udpf = GET_RX_COMPL_V0_BITS(udpf, compl);
|
|
rxcp->ip_csum = GET_RX_COMPL_V0_BITS(ipcksm, compl);
|
|
rxcp->l4_csum = GET_RX_COMPL_V0_BITS(l4_cksm, compl);
|
|
rxcp->ipv6 = GET_RX_COMPL_V0_BITS(ip_version, compl);
|
|
rxcp->num_rcvd = GET_RX_COMPL_V0_BITS(numfrags, compl);
|
|
rxcp->pkt_type = GET_RX_COMPL_V0_BITS(cast_enc, compl);
|
|
rxcp->rss_hash = GET_RX_COMPL_V0_BITS(rsshash, compl);
|
|
if (rxcp->vlanf) {
|
|
rxcp->qnq = GET_RX_COMPL_V0_BITS(qnq, compl);
|
|
rxcp->vlan_tag = GET_RX_COMPL_V0_BITS(vlan_tag, compl);
|
|
}
|
|
rxcp->port = GET_RX_COMPL_V0_BITS(port, compl);
|
|
rxcp->ip_frag = GET_RX_COMPL_V0_BITS(ip_frag, compl);
|
|
}
|
|
|
|
static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
|
|
{
|
|
struct be_eth_rx_compl *compl = queue_tail_node(&rxo->cq);
|
|
struct be_rx_compl_info *rxcp = &rxo->rxcp;
|
|
struct be_adapter *adapter = rxo->adapter;
|
|
|
|
/* For checking the valid bit it is Ok to use either definition as the
|
|
* valid bit is at the same position in both v0 and v1 Rx compl */
|
|
if (compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] == 0)
|
|
return NULL;
|
|
|
|
rmb();
|
|
be_dws_le_to_cpu(compl, sizeof(*compl));
|
|
|
|
if (adapter->be3_native)
|
|
be_parse_rx_compl_v1(compl, rxcp);
|
|
else
|
|
be_parse_rx_compl_v0(compl, rxcp);
|
|
|
|
if (rxcp->ip_frag)
|
|
rxcp->l4_csum = 0;
|
|
|
|
if (rxcp->vlanf) {
|
|
/* In QNQ modes, if qnq bit is not set, then the packet was
|
|
* tagged only with the transparent outer vlan-tag and must
|
|
* not be treated as a vlan packet by host
|
|
*/
|
|
if (be_is_qnq_mode(adapter) && !rxcp->qnq)
|
|
rxcp->vlanf = 0;
|
|
|
|
if (!lancer_chip(adapter))
|
|
rxcp->vlan_tag = swab16(rxcp->vlan_tag);
|
|
|
|
if (adapter->pvid == (rxcp->vlan_tag & VLAN_VID_MASK) &&
|
|
!test_bit(rxcp->vlan_tag, adapter->vids))
|
|
rxcp->vlanf = 0;
|
|
}
|
|
|
|
/* As the compl has been parsed, reset it; we wont touch it again */
|
|
compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] = 0;
|
|
|
|
queue_tail_inc(&rxo->cq);
|
|
return rxcp;
|
|
}
|
|
|
|
static inline struct page *be_alloc_pages(u32 size, gfp_t gfp)
|
|
{
|
|
u32 order = get_order(size);
|
|
|
|
if (order > 0)
|
|
gfp |= __GFP_COMP;
|
|
return alloc_pages(gfp, order);
|
|
}
|
|
|
|
/*
|
|
* Allocate a page, split it to fragments of size rx_frag_size and post as
|
|
* receive buffers to BE
|
|
*/
|
|
static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp, u32 frags_needed)
|
|
{
|
|
struct be_adapter *adapter = rxo->adapter;
|
|
struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL;
|
|
struct be_queue_info *rxq = &rxo->q;
|
|
struct page *pagep = NULL;
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct be_eth_rx_d *rxd;
|
|
u64 page_dmaaddr = 0, frag_dmaaddr;
|
|
u32 posted, page_offset = 0, notify = 0;
|
|
|
|
page_info = &rxo->page_info_tbl[rxq->head];
|
|
for (posted = 0; posted < frags_needed && !page_info->page; posted++) {
|
|
if (!pagep) {
|
|
pagep = be_alloc_pages(adapter->big_page_size, gfp);
|
|
if (unlikely(!pagep)) {
|
|
rx_stats(rxo)->rx_post_fail++;
|
|
break;
|
|
}
|
|
page_dmaaddr = dma_map_page(dev, pagep, 0,
|
|
adapter->big_page_size,
|
|
DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(dev, page_dmaaddr)) {
|
|
put_page(pagep);
|
|
pagep = NULL;
|
|
adapter->drv_stats.dma_map_errors++;
|
|
break;
|
|
}
|
|
page_offset = 0;
|
|
} else {
|
|
get_page(pagep);
|
|
page_offset += rx_frag_size;
|
|
}
|
|
page_info->page_offset = page_offset;
|
|
page_info->page = pagep;
|
|
|
|
rxd = queue_head_node(rxq);
|
|
frag_dmaaddr = page_dmaaddr + page_info->page_offset;
|
|
rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
|
|
rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
|
|
|
|
/* Any space left in the current big page for another frag? */
|
|
if ((page_offset + rx_frag_size + rx_frag_size) >
|
|
adapter->big_page_size) {
|
|
pagep = NULL;
|
|
page_info->last_frag = true;
|
|
dma_unmap_addr_set(page_info, bus, page_dmaaddr);
|
|
} else {
|
|
dma_unmap_addr_set(page_info, bus, frag_dmaaddr);
|
|
}
|
|
|
|
prev_page_info = page_info;
|
|
queue_head_inc(rxq);
|
|
page_info = &rxo->page_info_tbl[rxq->head];
|
|
}
|
|
|
|
/* Mark the last frag of a page when we break out of the above loop
|
|
* with no more slots available in the RXQ
|
|
*/
|
|
if (pagep) {
|
|
prev_page_info->last_frag = true;
|
|
dma_unmap_addr_set(prev_page_info, bus, page_dmaaddr);
|
|
}
|
|
|
|
if (posted) {
|
|
atomic_add(posted, &rxq->used);
|
|
if (rxo->rx_post_starved)
|
|
rxo->rx_post_starved = false;
|
|
do {
|
|
notify = min(256u, posted);
|
|
be_rxq_notify(adapter, rxq->id, notify);
|
|
posted -= notify;
|
|
} while (posted);
|
|
} else if (atomic_read(&rxq->used) == 0) {
|
|
/* Let be_worker replenish when memory is available */
|
|
rxo->rx_post_starved = true;
|
|
}
|
|
}
|
|
|
|
static struct be_eth_tx_compl *be_tx_compl_get(struct be_queue_info *tx_cq)
|
|
{
|
|
struct be_eth_tx_compl *txcp = queue_tail_node(tx_cq);
|
|
|
|
if (txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0)
|
|
return NULL;
|
|
|
|
rmb();
|
|
be_dws_le_to_cpu(txcp, sizeof(*txcp));
|
|
|
|
txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0;
|
|
|
|
queue_tail_inc(tx_cq);
|
|
return txcp;
|
|
}
|
|
|
|
static u16 be_tx_compl_process(struct be_adapter *adapter,
|
|
struct be_tx_obj *txo, u16 last_index)
|
|
{
|
|
struct be_queue_info *txq = &txo->q;
|
|
struct be_eth_wrb *wrb;
|
|
struct sk_buff **sent_skbs = txo->sent_skb_list;
|
|
struct sk_buff *sent_skb;
|
|
u16 cur_index, num_wrbs = 1; /* account for hdr wrb */
|
|
bool unmap_skb_hdr = true;
|
|
|
|
sent_skb = sent_skbs[txq->tail];
|
|
BUG_ON(!sent_skb);
|
|
sent_skbs[txq->tail] = NULL;
|
|
|
|
/* skip header wrb */
|
|
queue_tail_inc(txq);
|
|
|
|
do {
|
|
cur_index = txq->tail;
|
|
wrb = queue_tail_node(txq);
|
|
unmap_tx_frag(&adapter->pdev->dev, wrb,
|
|
(unmap_skb_hdr && skb_headlen(sent_skb)));
|
|
unmap_skb_hdr = false;
|
|
|
|
num_wrbs++;
|
|
queue_tail_inc(txq);
|
|
} while (cur_index != last_index);
|
|
|
|
dev_consume_skb_any(sent_skb);
|
|
return num_wrbs;
|
|
}
|
|
|
|
/* Return the number of events in the event queue */
|
|
static inline int events_get(struct be_eq_obj *eqo)
|
|
{
|
|
struct be_eq_entry *eqe;
|
|
int num = 0;
|
|
|
|
do {
|
|
eqe = queue_tail_node(&eqo->q);
|
|
if (eqe->evt == 0)
|
|
break;
|
|
|
|
rmb();
|
|
eqe->evt = 0;
|
|
num++;
|
|
queue_tail_inc(&eqo->q);
|
|
} while (true);
|
|
|
|
return num;
|
|
}
|
|
|
|
/* Leaves the EQ is disarmed state */
|
|
static void be_eq_clean(struct be_eq_obj *eqo)
|
|
{
|
|
int num = events_get(eqo);
|
|
|
|
be_eq_notify(eqo->adapter, eqo->q.id, false, true, num);
|
|
}
|
|
|
|
static void be_rx_cq_clean(struct be_rx_obj *rxo)
|
|
{
|
|
struct be_rx_page_info *page_info;
|
|
struct be_queue_info *rxq = &rxo->q;
|
|
struct be_queue_info *rx_cq = &rxo->cq;
|
|
struct be_rx_compl_info *rxcp;
|
|
struct be_adapter *adapter = rxo->adapter;
|
|
int flush_wait = 0;
|
|
|
|
/* Consume pending rx completions.
|
|
* Wait for the flush completion (identified by zero num_rcvd)
|
|
* to arrive. Notify CQ even when there are no more CQ entries
|
|
* for HW to flush partially coalesced CQ entries.
|
|
* In Lancer, there is no need to wait for flush compl.
|
|
*/
|
|
for (;;) {
|
|
rxcp = be_rx_compl_get(rxo);
|
|
if (!rxcp) {
|
|
if (lancer_chip(adapter))
|
|
break;
|
|
|
|
if (flush_wait++ > 10 || be_hw_error(adapter)) {
|
|
dev_warn(&adapter->pdev->dev,
|
|
"did not receive flush compl\n");
|
|
break;
|
|
}
|
|
be_cq_notify(adapter, rx_cq->id, true, 0);
|
|
mdelay(1);
|
|
} else {
|
|
be_rx_compl_discard(rxo, rxcp);
|
|
be_cq_notify(adapter, rx_cq->id, false, 1);
|
|
if (rxcp->num_rcvd == 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* After cleanup, leave the CQ in unarmed state */
|
|
be_cq_notify(adapter, rx_cq->id, false, 0);
|
|
|
|
/* Then free posted rx buffers that were not used */
|
|
while (atomic_read(&rxq->used) > 0) {
|
|
page_info = get_rx_page_info(rxo);
|
|
put_page(page_info->page);
|
|
memset(page_info, 0, sizeof(*page_info));
|
|
}
|
|
BUG_ON(atomic_read(&rxq->used));
|
|
rxq->tail = 0;
|
|
rxq->head = 0;
|
|
}
|
|
|
|
static void be_tx_compl_clean(struct be_adapter *adapter)
|
|
{
|
|
struct be_tx_obj *txo;
|
|
struct be_queue_info *txq;
|
|
struct be_eth_tx_compl *txcp;
|
|
u16 end_idx, cmpl = 0, timeo = 0, num_wrbs = 0;
|
|
struct sk_buff *sent_skb;
|
|
bool dummy_wrb;
|
|
int i, pending_txqs;
|
|
|
|
/* Stop polling for compls when HW has been silent for 10ms */
|
|
do {
|
|
pending_txqs = adapter->num_tx_qs;
|
|
|
|
for_all_tx_queues(adapter, txo, i) {
|
|
cmpl = 0;
|
|
num_wrbs = 0;
|
|
txq = &txo->q;
|
|
while ((txcp = be_tx_compl_get(&txo->cq))) {
|
|
end_idx = GET_TX_COMPL_BITS(wrb_index, txcp);
|
|
num_wrbs += be_tx_compl_process(adapter, txo,
|
|
end_idx);
|
|
cmpl++;
|
|
}
|
|
if (cmpl) {
|
|
be_cq_notify(adapter, txo->cq.id, false, cmpl);
|
|
atomic_sub(num_wrbs, &txq->used);
|
|
timeo = 0;
|
|
}
|
|
if (atomic_read(&txq->used) == 0)
|
|
pending_txqs--;
|
|
}
|
|
|
|
if (pending_txqs == 0 || ++timeo > 10 || be_hw_error(adapter))
|
|
break;
|
|
|
|
mdelay(1);
|
|
} while (true);
|
|
|
|
for_all_tx_queues(adapter, txo, i) {
|
|
txq = &txo->q;
|
|
if (atomic_read(&txq->used))
|
|
dev_err(&adapter->pdev->dev, "%d pending tx-compls\n",
|
|
atomic_read(&txq->used));
|
|
|
|
/* free posted tx for which compls will never arrive */
|
|
while (atomic_read(&txq->used)) {
|
|
sent_skb = txo->sent_skb_list[txq->tail];
|
|
end_idx = txq->tail;
|
|
num_wrbs = wrb_cnt_for_skb(adapter, sent_skb,
|
|
&dummy_wrb);
|
|
index_adv(&end_idx, num_wrbs - 1, txq->len);
|
|
num_wrbs = be_tx_compl_process(adapter, txo, end_idx);
|
|
atomic_sub(num_wrbs, &txq->used);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void be_evt_queues_destroy(struct be_adapter *adapter)
|
|
{
|
|
struct be_eq_obj *eqo;
|
|
int i;
|
|
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
if (eqo->q.created) {
|
|
be_eq_clean(eqo);
|
|
be_cmd_q_destroy(adapter, &eqo->q, QTYPE_EQ);
|
|
napi_hash_del(&eqo->napi);
|
|
netif_napi_del(&eqo->napi);
|
|
}
|
|
be_queue_free(adapter, &eqo->q);
|
|
}
|
|
}
|
|
|
|
static int be_evt_queues_create(struct be_adapter *adapter)
|
|
{
|
|
struct be_queue_info *eq;
|
|
struct be_eq_obj *eqo;
|
|
struct be_aic_obj *aic;
|
|
int i, rc;
|
|
|
|
adapter->num_evt_qs = min_t(u16, num_irqs(adapter),
|
|
adapter->cfg_num_qs);
|
|
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
netif_napi_add(adapter->netdev, &eqo->napi, be_poll,
|
|
BE_NAPI_WEIGHT);
|
|
napi_hash_add(&eqo->napi);
|
|
aic = &adapter->aic_obj[i];
|
|
eqo->adapter = adapter;
|
|
eqo->idx = i;
|
|
aic->max_eqd = BE_MAX_EQD;
|
|
aic->enable = true;
|
|
|
|
eq = &eqo->q;
|
|
rc = be_queue_alloc(adapter, eq, EVNT_Q_LEN,
|
|
sizeof(struct be_eq_entry));
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = be_cmd_eq_create(adapter, eqo);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void be_mcc_queues_destroy(struct be_adapter *adapter)
|
|
{
|
|
struct be_queue_info *q;
|
|
|
|
q = &adapter->mcc_obj.q;
|
|
if (q->created)
|
|
be_cmd_q_destroy(adapter, q, QTYPE_MCCQ);
|
|
be_queue_free(adapter, q);
|
|
|
|
q = &adapter->mcc_obj.cq;
|
|
if (q->created)
|
|
be_cmd_q_destroy(adapter, q, QTYPE_CQ);
|
|
be_queue_free(adapter, q);
|
|
}
|
|
|
|
/* Must be called only after TX qs are created as MCC shares TX EQ */
|
|
static int be_mcc_queues_create(struct be_adapter *adapter)
|
|
{
|
|
struct be_queue_info *q, *cq;
|
|
|
|
cq = &adapter->mcc_obj.cq;
|
|
if (be_queue_alloc(adapter, cq, MCC_CQ_LEN,
|
|
sizeof(struct be_mcc_compl)))
|
|
goto err;
|
|
|
|
/* Use the default EQ for MCC completions */
|
|
if (be_cmd_cq_create(adapter, cq, &mcc_eqo(adapter)->q, true, 0))
|
|
goto mcc_cq_free;
|
|
|
|
q = &adapter->mcc_obj.q;
|
|
if (be_queue_alloc(adapter, q, MCC_Q_LEN, sizeof(struct be_mcc_wrb)))
|
|
goto mcc_cq_destroy;
|
|
|
|
if (be_cmd_mccq_create(adapter, q, cq))
|
|
goto mcc_q_free;
|
|
|
|
return 0;
|
|
|
|
mcc_q_free:
|
|
be_queue_free(adapter, q);
|
|
mcc_cq_destroy:
|
|
be_cmd_q_destroy(adapter, cq, QTYPE_CQ);
|
|
mcc_cq_free:
|
|
be_queue_free(adapter, cq);
|
|
err:
|
|
return -1;
|
|
}
|
|
|
|
static void be_tx_queues_destroy(struct be_adapter *adapter)
|
|
{
|
|
struct be_queue_info *q;
|
|
struct be_tx_obj *txo;
|
|
u8 i;
|
|
|
|
for_all_tx_queues(adapter, txo, i) {
|
|
q = &txo->q;
|
|
if (q->created)
|
|
be_cmd_q_destroy(adapter, q, QTYPE_TXQ);
|
|
be_queue_free(adapter, q);
|
|
|
|
q = &txo->cq;
|
|
if (q->created)
|
|
be_cmd_q_destroy(adapter, q, QTYPE_CQ);
|
|
be_queue_free(adapter, q);
|
|
}
|
|
}
|
|
|
|
static int be_tx_qs_create(struct be_adapter *adapter)
|
|
{
|
|
struct be_queue_info *cq, *eq;
|
|
struct be_tx_obj *txo;
|
|
int status, i;
|
|
|
|
adapter->num_tx_qs = min(adapter->num_evt_qs, be_max_txqs(adapter));
|
|
|
|
for_all_tx_queues(adapter, txo, i) {
|
|
cq = &txo->cq;
|
|
status = be_queue_alloc(adapter, cq, TX_CQ_LEN,
|
|
sizeof(struct be_eth_tx_compl));
|
|
if (status)
|
|
return status;
|
|
|
|
u64_stats_init(&txo->stats.sync);
|
|
u64_stats_init(&txo->stats.sync_compl);
|
|
|
|
/* If num_evt_qs is less than num_tx_qs, then more than
|
|
* one txq share an eq
|
|
*/
|
|
eq = &adapter->eq_obj[i % adapter->num_evt_qs].q;
|
|
status = be_cmd_cq_create(adapter, cq, eq, false, 3);
|
|
if (status)
|
|
return status;
|
|
|
|
status = be_queue_alloc(adapter, &txo->q, TX_Q_LEN,
|
|
sizeof(struct be_eth_wrb));
|
|
if (status)
|
|
return status;
|
|
|
|
status = be_cmd_txq_create(adapter, txo);
|
|
if (status)
|
|
return status;
|
|
}
|
|
|
|
dev_info(&adapter->pdev->dev, "created %d TX queue(s)\n",
|
|
adapter->num_tx_qs);
|
|
return 0;
|
|
}
|
|
|
|
static void be_rx_cqs_destroy(struct be_adapter *adapter)
|
|
{
|
|
struct be_queue_info *q;
|
|
struct be_rx_obj *rxo;
|
|
int i;
|
|
|
|
for_all_rx_queues(adapter, rxo, i) {
|
|
q = &rxo->cq;
|
|
if (q->created)
|
|
be_cmd_q_destroy(adapter, q, QTYPE_CQ);
|
|
be_queue_free(adapter, q);
|
|
}
|
|
}
|
|
|
|
static int be_rx_cqs_create(struct be_adapter *adapter)
|
|
{
|
|
struct be_queue_info *eq, *cq;
|
|
struct be_rx_obj *rxo;
|
|
int rc, i;
|
|
|
|
/* We can create as many RSS rings as there are EQs. */
|
|
adapter->num_rx_qs = adapter->num_evt_qs;
|
|
|
|
/* We'll use RSS only if atleast 2 RSS rings are supported.
|
|
* When RSS is used, we'll need a default RXQ for non-IP traffic.
|
|
*/
|
|
if (adapter->num_rx_qs > 1)
|
|
adapter->num_rx_qs++;
|
|
|
|
adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
|
|
for_all_rx_queues(adapter, rxo, i) {
|
|
rxo->adapter = adapter;
|
|
cq = &rxo->cq;
|
|
rc = be_queue_alloc(adapter, cq, RX_CQ_LEN,
|
|
sizeof(struct be_eth_rx_compl));
|
|
if (rc)
|
|
return rc;
|
|
|
|
u64_stats_init(&rxo->stats.sync);
|
|
eq = &adapter->eq_obj[i % adapter->num_evt_qs].q;
|
|
rc = be_cmd_cq_create(adapter, cq, eq, false, 3);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
dev_info(&adapter->pdev->dev,
|
|
"created %d RSS queue(s) and 1 default RX queue\n",
|
|
adapter->num_rx_qs - 1);
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t be_intx(int irq, void *dev)
|
|
{
|
|
struct be_eq_obj *eqo = dev;
|
|
struct be_adapter *adapter = eqo->adapter;
|
|
int num_evts = 0;
|
|
|
|
/* IRQ is not expected when NAPI is scheduled as the EQ
|
|
* will not be armed.
|
|
* But, this can happen on Lancer INTx where it takes
|
|
* a while to de-assert INTx or in BE2 where occasionaly
|
|
* an interrupt may be raised even when EQ is unarmed.
|
|
* If NAPI is already scheduled, then counting & notifying
|
|
* events will orphan them.
|
|
*/
|
|
if (napi_schedule_prep(&eqo->napi)) {
|
|
num_evts = events_get(eqo);
|
|
__napi_schedule(&eqo->napi);
|
|
if (num_evts)
|
|
eqo->spurious_intr = 0;
|
|
}
|
|
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
|
|
|
|
/* Return IRQ_HANDLED only for the the first spurious intr
|
|
* after a valid intr to stop the kernel from branding
|
|
* this irq as a bad one!
|
|
*/
|
|
if (num_evts || eqo->spurious_intr++ == 0)
|
|
return IRQ_HANDLED;
|
|
else
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static irqreturn_t be_msix(int irq, void *dev)
|
|
{
|
|
struct be_eq_obj *eqo = dev;
|
|
|
|
be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0);
|
|
napi_schedule(&eqo->napi);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline bool do_gro(struct be_rx_compl_info *rxcp)
|
|
{
|
|
return (rxcp->tcpf && !rxcp->err && rxcp->l4_csum) ? true : false;
|
|
}
|
|
|
|
static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi,
|
|
int budget, int polling)
|
|
{
|
|
struct be_adapter *adapter = rxo->adapter;
|
|
struct be_queue_info *rx_cq = &rxo->cq;
|
|
struct be_rx_compl_info *rxcp;
|
|
u32 work_done;
|
|
u32 frags_consumed = 0;
|
|
|
|
for (work_done = 0; work_done < budget; work_done++) {
|
|
rxcp = be_rx_compl_get(rxo);
|
|
if (!rxcp)
|
|
break;
|
|
|
|
/* Is it a flush compl that has no data */
|
|
if (unlikely(rxcp->num_rcvd == 0))
|
|
goto loop_continue;
|
|
|
|
/* Discard compl with partial DMA Lancer B0 */
|
|
if (unlikely(!rxcp->pkt_size)) {
|
|
be_rx_compl_discard(rxo, rxcp);
|
|
goto loop_continue;
|
|
}
|
|
|
|
/* On BE drop pkts that arrive due to imperfect filtering in
|
|
* promiscuous mode on some skews
|
|
*/
|
|
if (unlikely(rxcp->port != adapter->port_num &&
|
|
!lancer_chip(adapter))) {
|
|
be_rx_compl_discard(rxo, rxcp);
|
|
goto loop_continue;
|
|
}
|
|
|
|
/* Don't do gro when we're busy_polling */
|
|
if (do_gro(rxcp) && polling != BUSY_POLLING)
|
|
be_rx_compl_process_gro(rxo, napi, rxcp);
|
|
else
|
|
be_rx_compl_process(rxo, napi, rxcp);
|
|
|
|
loop_continue:
|
|
frags_consumed += rxcp->num_rcvd;
|
|
be_rx_stats_update(rxo, rxcp);
|
|
}
|
|
|
|
if (work_done) {
|
|
be_cq_notify(adapter, rx_cq->id, true, work_done);
|
|
|
|
/* When an rx-obj gets into post_starved state, just
|
|
* let be_worker do the posting.
|
|
*/
|
|
if (atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM &&
|
|
!rxo->rx_post_starved)
|
|
be_post_rx_frags(rxo, GFP_ATOMIC,
|
|
max_t(u32, MAX_RX_POST,
|
|
frags_consumed));
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static inline void be_update_tx_err(struct be_tx_obj *txo, u32 status)
|
|
{
|
|
switch (status) {
|
|
case BE_TX_COMP_HDR_PARSE_ERR:
|
|
tx_stats(txo)->tx_hdr_parse_err++;
|
|
break;
|
|
case BE_TX_COMP_NDMA_ERR:
|
|
tx_stats(txo)->tx_dma_err++;
|
|
break;
|
|
case BE_TX_COMP_ACL_ERR:
|
|
tx_stats(txo)->tx_spoof_check_err++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void lancer_update_tx_err(struct be_tx_obj *txo, u32 status)
|
|
{
|
|
switch (status) {
|
|
case LANCER_TX_COMP_LSO_ERR:
|
|
tx_stats(txo)->tx_tso_err++;
|
|
break;
|
|
case LANCER_TX_COMP_HSW_DROP_MAC_ERR:
|
|
case LANCER_TX_COMP_HSW_DROP_VLAN_ERR:
|
|
tx_stats(txo)->tx_spoof_check_err++;
|
|
break;
|
|
case LANCER_TX_COMP_QINQ_ERR:
|
|
tx_stats(txo)->tx_qinq_err++;
|
|
break;
|
|
case LANCER_TX_COMP_PARITY_ERR:
|
|
tx_stats(txo)->tx_internal_parity_err++;
|
|
break;
|
|
case LANCER_TX_COMP_DMA_ERR:
|
|
tx_stats(txo)->tx_dma_err++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
|
|
int idx)
|
|
{
|
|
struct be_eth_tx_compl *txcp;
|
|
int num_wrbs = 0, work_done = 0;
|
|
u32 compl_status;
|
|
u16 last_idx;
|
|
|
|
while ((txcp = be_tx_compl_get(&txo->cq))) {
|
|
last_idx = GET_TX_COMPL_BITS(wrb_index, txcp);
|
|
num_wrbs += be_tx_compl_process(adapter, txo, last_idx);
|
|
work_done++;
|
|
|
|
compl_status = GET_TX_COMPL_BITS(status, txcp);
|
|
if (compl_status) {
|
|
if (lancer_chip(adapter))
|
|
lancer_update_tx_err(txo, compl_status);
|
|
else
|
|
be_update_tx_err(txo, compl_status);
|
|
}
|
|
}
|
|
|
|
if (work_done) {
|
|
be_cq_notify(adapter, txo->cq.id, true, work_done);
|
|
atomic_sub(num_wrbs, &txo->q.used);
|
|
|
|
/* As Tx wrbs have been freed up, wake up netdev queue
|
|
* if it was stopped due to lack of tx wrbs. */
|
|
if (__netif_subqueue_stopped(adapter->netdev, idx) &&
|
|
atomic_read(&txo->q.used) < txo->q.len / 2) {
|
|
netif_wake_subqueue(adapter->netdev, idx);
|
|
}
|
|
|
|
u64_stats_update_begin(&tx_stats(txo)->sync_compl);
|
|
tx_stats(txo)->tx_compl += work_done;
|
|
u64_stats_update_end(&tx_stats(txo)->sync_compl);
|
|
}
|
|
}
|
|
|
|
int be_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct be_eq_obj *eqo = container_of(napi, struct be_eq_obj, napi);
|
|
struct be_adapter *adapter = eqo->adapter;
|
|
int max_work = 0, work, i, num_evts;
|
|
struct be_rx_obj *rxo;
|
|
struct be_tx_obj *txo;
|
|
|
|
num_evts = events_get(eqo);
|
|
|
|
for_all_tx_queues_on_eq(adapter, eqo, txo, i)
|
|
be_process_tx(adapter, txo, i);
|
|
|
|
if (be_lock_napi(eqo)) {
|
|
/* This loop will iterate twice for EQ0 in which
|
|
* completions of the last RXQ (default one) are also processed
|
|
* For other EQs the loop iterates only once
|
|
*/
|
|
for_all_rx_queues_on_eq(adapter, eqo, rxo, i) {
|
|
work = be_process_rx(rxo, napi, budget, NAPI_POLLING);
|
|
max_work = max(work, max_work);
|
|
}
|
|
be_unlock_napi(eqo);
|
|
} else {
|
|
max_work = budget;
|
|
}
|
|
|
|
if (is_mcc_eqo(eqo))
|
|
be_process_mcc(adapter);
|
|
|
|
if (max_work < budget) {
|
|
napi_complete(napi);
|
|
be_eq_notify(adapter, eqo->q.id, true, false, num_evts);
|
|
} else {
|
|
/* As we'll continue in polling mode, count and clear events */
|
|
be_eq_notify(adapter, eqo->q.id, false, false, num_evts);
|
|
}
|
|
return max_work;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_RX_BUSY_POLL
|
|
static int be_busy_poll(struct napi_struct *napi)
|
|
{
|
|
struct be_eq_obj *eqo = container_of(napi, struct be_eq_obj, napi);
|
|
struct be_adapter *adapter = eqo->adapter;
|
|
struct be_rx_obj *rxo;
|
|
int i, work = 0;
|
|
|
|
if (!be_lock_busy_poll(eqo))
|
|
return LL_FLUSH_BUSY;
|
|
|
|
for_all_rx_queues_on_eq(adapter, eqo, rxo, i) {
|
|
work = be_process_rx(rxo, napi, 4, BUSY_POLLING);
|
|
if (work)
|
|
break;
|
|
}
|
|
|
|
be_unlock_busy_poll(eqo);
|
|
return work;
|
|
}
|
|
#endif
|
|
|
|
void be_detect_error(struct be_adapter *adapter)
|
|
{
|
|
u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0;
|
|
u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0;
|
|
u32 i;
|
|
bool error_detected = false;
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
if (be_hw_error(adapter))
|
|
return;
|
|
|
|
if (lancer_chip(adapter)) {
|
|
sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
|
|
if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
|
|
sliport_err1 = ioread32(adapter->db +
|
|
SLIPORT_ERROR1_OFFSET);
|
|
sliport_err2 = ioread32(adapter->db +
|
|
SLIPORT_ERROR2_OFFSET);
|
|
adapter->hw_error = true;
|
|
/* Do not log error messages if its a FW reset */
|
|
if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 &&
|
|
sliport_err2 == SLIPORT_ERROR_FW_RESET2) {
|
|
dev_info(dev, "Firmware update in progress\n");
|
|
} else {
|
|
error_detected = true;
|
|
dev_err(dev, "Error detected in the card\n");
|
|
dev_err(dev, "ERR: sliport status 0x%x\n",
|
|
sliport_status);
|
|
dev_err(dev, "ERR: sliport error1 0x%x\n",
|
|
sliport_err1);
|
|
dev_err(dev, "ERR: sliport error2 0x%x\n",
|
|
sliport_err2);
|
|
}
|
|
}
|
|
} else {
|
|
pci_read_config_dword(adapter->pdev,
|
|
PCICFG_UE_STATUS_LOW, &ue_lo);
|
|
pci_read_config_dword(adapter->pdev,
|
|
PCICFG_UE_STATUS_HIGH, &ue_hi);
|
|
pci_read_config_dword(adapter->pdev,
|
|
PCICFG_UE_STATUS_LOW_MASK, &ue_lo_mask);
|
|
pci_read_config_dword(adapter->pdev,
|
|
PCICFG_UE_STATUS_HI_MASK, &ue_hi_mask);
|
|
|
|
ue_lo = (ue_lo & ~ue_lo_mask);
|
|
ue_hi = (ue_hi & ~ue_hi_mask);
|
|
|
|
/* On certain platforms BE hardware can indicate spurious UEs.
|
|
* Allow HW to stop working completely in case of a real UE.
|
|
* Hence not setting the hw_error for UE detection.
|
|
*/
|
|
|
|
if (ue_lo || ue_hi) {
|
|
error_detected = true;
|
|
dev_err(dev,
|
|
"Unrecoverable Error detected in the adapter");
|
|
dev_err(dev, "Please reboot server to recover");
|
|
if (skyhawk_chip(adapter))
|
|
adapter->hw_error = true;
|
|
for (i = 0; ue_lo; ue_lo >>= 1, i++) {
|
|
if (ue_lo & 1)
|
|
dev_err(dev, "UE: %s bit set\n",
|
|
ue_status_low_desc[i]);
|
|
}
|
|
for (i = 0; ue_hi; ue_hi >>= 1, i++) {
|
|
if (ue_hi & 1)
|
|
dev_err(dev, "UE: %s bit set\n",
|
|
ue_status_hi_desc[i]);
|
|
}
|
|
}
|
|
}
|
|
if (error_detected)
|
|
netif_carrier_off(netdev);
|
|
}
|
|
|
|
static void be_msix_disable(struct be_adapter *adapter)
|
|
{
|
|
if (msix_enabled(adapter)) {
|
|
pci_disable_msix(adapter->pdev);
|
|
adapter->num_msix_vec = 0;
|
|
adapter->num_msix_roce_vec = 0;
|
|
}
|
|
}
|
|
|
|
static int be_msix_enable(struct be_adapter *adapter)
|
|
{
|
|
int i, num_vec;
|
|
struct device *dev = &adapter->pdev->dev;
|
|
|
|
/* If RoCE is supported, program the max number of NIC vectors that
|
|
* may be configured via set-channels, along with vectors needed for
|
|
* RoCe. Else, just program the number we'll use initially.
|
|
*/
|
|
if (be_roce_supported(adapter))
|
|
num_vec = min_t(int, 2 * be_max_eqs(adapter),
|
|
2 * num_online_cpus());
|
|
else
|
|
num_vec = adapter->cfg_num_qs;
|
|
|
|
for (i = 0; i < num_vec; i++)
|
|
adapter->msix_entries[i].entry = i;
|
|
|
|
num_vec = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
|
|
MIN_MSIX_VECTORS, num_vec);
|
|
if (num_vec < 0)
|
|
goto fail;
|
|
|
|
if (be_roce_supported(adapter) && num_vec > MIN_MSIX_VECTORS) {
|
|
adapter->num_msix_roce_vec = num_vec / 2;
|
|
dev_info(dev, "enabled %d MSI-x vector(s) for RoCE\n",
|
|
adapter->num_msix_roce_vec);
|
|
}
|
|
|
|
adapter->num_msix_vec = num_vec - adapter->num_msix_roce_vec;
|
|
|
|
dev_info(dev, "enabled %d MSI-x vector(s) for NIC\n",
|
|
adapter->num_msix_vec);
|
|
return 0;
|
|
|
|
fail:
|
|
dev_warn(dev, "MSIx enable failed\n");
|
|
|
|
/* INTx is not supported in VFs, so fail probe if enable_msix fails */
|
|
if (!be_physfn(adapter))
|
|
return num_vec;
|
|
return 0;
|
|
}
|
|
|
|
static inline int be_msix_vec_get(struct be_adapter *adapter,
|
|
struct be_eq_obj *eqo)
|
|
{
|
|
return adapter->msix_entries[eqo->msix_idx].vector;
|
|
}
|
|
|
|
static int be_msix_register(struct be_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct be_eq_obj *eqo;
|
|
int status, i, vec;
|
|
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
sprintf(eqo->desc, "%s-q%d", netdev->name, i);
|
|
vec = be_msix_vec_get(adapter, eqo);
|
|
status = request_irq(vec, be_msix, 0, eqo->desc, eqo);
|
|
if (status)
|
|
goto err_msix;
|
|
}
|
|
|
|
return 0;
|
|
err_msix:
|
|
for (i--, eqo = &adapter->eq_obj[i]; i >= 0; i--, eqo--)
|
|
free_irq(be_msix_vec_get(adapter, eqo), eqo);
|
|
dev_warn(&adapter->pdev->dev, "MSIX Request IRQ failed - err %d\n",
|
|
status);
|
|
be_msix_disable(adapter);
|
|
return status;
|
|
}
|
|
|
|
static int be_irq_register(struct be_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
int status;
|
|
|
|
if (msix_enabled(adapter)) {
|
|
status = be_msix_register(adapter);
|
|
if (status == 0)
|
|
goto done;
|
|
/* INTx is not supported for VF */
|
|
if (!be_physfn(adapter))
|
|
return status;
|
|
}
|
|
|
|
/* INTx: only the first EQ is used */
|
|
netdev->irq = adapter->pdev->irq;
|
|
status = request_irq(netdev->irq, be_intx, IRQF_SHARED, netdev->name,
|
|
&adapter->eq_obj[0]);
|
|
if (status) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"INTx request IRQ failed - err %d\n", status);
|
|
return status;
|
|
}
|
|
done:
|
|
adapter->isr_registered = true;
|
|
return 0;
|
|
}
|
|
|
|
static void be_irq_unregister(struct be_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct be_eq_obj *eqo;
|
|
int i;
|
|
|
|
if (!adapter->isr_registered)
|
|
return;
|
|
|
|
/* INTx */
|
|
if (!msix_enabled(adapter)) {
|
|
free_irq(netdev->irq, &adapter->eq_obj[0]);
|
|
goto done;
|
|
}
|
|
|
|
/* MSIx */
|
|
for_all_evt_queues(adapter, eqo, i)
|
|
free_irq(be_msix_vec_get(adapter, eqo), eqo);
|
|
|
|
done:
|
|
adapter->isr_registered = false;
|
|
}
|
|
|
|
static void be_rx_qs_destroy(struct be_adapter *adapter)
|
|
{
|
|
struct be_queue_info *q;
|
|
struct be_rx_obj *rxo;
|
|
int i;
|
|
|
|
for_all_rx_queues(adapter, rxo, i) {
|
|
q = &rxo->q;
|
|
if (q->created) {
|
|
be_cmd_rxq_destroy(adapter, q);
|
|
be_rx_cq_clean(rxo);
|
|
}
|
|
be_queue_free(adapter, q);
|
|
}
|
|
}
|
|
|
|
static int be_close(struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_eq_obj *eqo;
|
|
int i;
|
|
|
|
/* This protection is needed as be_close() may be called even when the
|
|
* adapter is in cleared state (after eeh perm failure)
|
|
*/
|
|
if (!(adapter->flags & BE_FLAGS_SETUP_DONE))
|
|
return 0;
|
|
|
|
be_roce_dev_close(adapter);
|
|
|
|
if (adapter->flags & BE_FLAGS_NAPI_ENABLED) {
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
napi_disable(&eqo->napi);
|
|
be_disable_busy_poll(eqo);
|
|
}
|
|
adapter->flags &= ~BE_FLAGS_NAPI_ENABLED;
|
|
}
|
|
|
|
be_async_mcc_disable(adapter);
|
|
|
|
/* Wait for all pending tx completions to arrive so that
|
|
* all tx skbs are freed.
|
|
*/
|
|
netif_tx_disable(netdev);
|
|
be_tx_compl_clean(adapter);
|
|
|
|
be_rx_qs_destroy(adapter);
|
|
|
|
for (i = 1; i < (adapter->uc_macs + 1); i++)
|
|
be_cmd_pmac_del(adapter, adapter->if_handle,
|
|
adapter->pmac_id[i], 0);
|
|
adapter->uc_macs = 0;
|
|
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
if (msix_enabled(adapter))
|
|
synchronize_irq(be_msix_vec_get(adapter, eqo));
|
|
else
|
|
synchronize_irq(netdev->irq);
|
|
be_eq_clean(eqo);
|
|
}
|
|
|
|
be_irq_unregister(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int be_rx_qs_create(struct be_adapter *adapter)
|
|
{
|
|
struct be_rx_obj *rxo;
|
|
int rc, i, j;
|
|
u8 rss_hkey[RSS_HASH_KEY_LEN];
|
|
struct rss_info *rss = &adapter->rss_info;
|
|
|
|
for_all_rx_queues(adapter, rxo, i) {
|
|
rc = be_queue_alloc(adapter, &rxo->q, RX_Q_LEN,
|
|
sizeof(struct be_eth_rx_d));
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* The FW would like the default RXQ to be created first */
|
|
rxo = default_rxo(adapter);
|
|
rc = be_cmd_rxq_create(adapter, &rxo->q, rxo->cq.id, rx_frag_size,
|
|
adapter->if_handle, false, &rxo->rss_id);
|
|
if (rc)
|
|
return rc;
|
|
|
|
for_all_rss_queues(adapter, rxo, i) {
|
|
rc = be_cmd_rxq_create(adapter, &rxo->q, rxo->cq.id,
|
|
rx_frag_size, adapter->if_handle,
|
|
true, &rxo->rss_id);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
if (be_multi_rxq(adapter)) {
|
|
for (j = 0; j < RSS_INDIR_TABLE_LEN;
|
|
j += adapter->num_rx_qs - 1) {
|
|
for_all_rss_queues(adapter, rxo, i) {
|
|
if ((j + i) >= RSS_INDIR_TABLE_LEN)
|
|
break;
|
|
rss->rsstable[j + i] = rxo->rss_id;
|
|
rss->rss_queue[j + i] = i;
|
|
}
|
|
}
|
|
rss->rss_flags = RSS_ENABLE_TCP_IPV4 | RSS_ENABLE_IPV4 |
|
|
RSS_ENABLE_TCP_IPV6 | RSS_ENABLE_IPV6;
|
|
|
|
if (!BEx_chip(adapter))
|
|
rss->rss_flags |= RSS_ENABLE_UDP_IPV4 |
|
|
RSS_ENABLE_UDP_IPV6;
|
|
} else {
|
|
/* Disable RSS, if only default RX Q is created */
|
|
rss->rss_flags = RSS_ENABLE_NONE;
|
|
}
|
|
|
|
get_random_bytes(rss_hkey, RSS_HASH_KEY_LEN);
|
|
rc = be_cmd_rss_config(adapter, rss->rsstable, rss->rss_flags,
|
|
128, rss_hkey);
|
|
if (rc) {
|
|
rss->rss_flags = RSS_ENABLE_NONE;
|
|
return rc;
|
|
}
|
|
|
|
memcpy(rss->rss_hkey, rss_hkey, RSS_HASH_KEY_LEN);
|
|
|
|
/* First time posting */
|
|
for_all_rx_queues(adapter, rxo, i)
|
|
be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST);
|
|
return 0;
|
|
}
|
|
|
|
static int be_open(struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_eq_obj *eqo;
|
|
struct be_rx_obj *rxo;
|
|
struct be_tx_obj *txo;
|
|
u8 link_status;
|
|
int status, i;
|
|
|
|
status = be_rx_qs_create(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = be_irq_register(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
for_all_rx_queues(adapter, rxo, i)
|
|
be_cq_notify(adapter, rxo->cq.id, true, 0);
|
|
|
|
for_all_tx_queues(adapter, txo, i)
|
|
be_cq_notify(adapter, txo->cq.id, true, 0);
|
|
|
|
be_async_mcc_enable(adapter);
|
|
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
napi_enable(&eqo->napi);
|
|
be_enable_busy_poll(eqo);
|
|
be_eq_notify(adapter, eqo->q.id, true, true, 0);
|
|
}
|
|
adapter->flags |= BE_FLAGS_NAPI_ENABLED;
|
|
|
|
status = be_cmd_link_status_query(adapter, NULL, &link_status, 0);
|
|
if (!status)
|
|
be_link_status_update(adapter, link_status);
|
|
|
|
netif_tx_start_all_queues(netdev);
|
|
be_roce_dev_open(adapter);
|
|
|
|
#ifdef CONFIG_BE2NET_VXLAN
|
|
if (skyhawk_chip(adapter))
|
|
vxlan_get_rx_port(netdev);
|
|
#endif
|
|
|
|
return 0;
|
|
err:
|
|
be_close(adapter->netdev);
|
|
return -EIO;
|
|
}
|
|
|
|
static int be_setup_wol(struct be_adapter *adapter, bool enable)
|
|
{
|
|
struct be_dma_mem cmd;
|
|
int status = 0;
|
|
u8 mac[ETH_ALEN];
|
|
|
|
memset(mac, 0, ETH_ALEN);
|
|
|
|
cmd.size = sizeof(struct be_cmd_req_acpi_wol_magic_config);
|
|
cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
|
|
GFP_KERNEL);
|
|
if (!cmd.va)
|
|
return -ENOMEM;
|
|
|
|
if (enable) {
|
|
status = pci_write_config_dword(adapter->pdev,
|
|
PCICFG_PM_CONTROL_OFFSET,
|
|
PCICFG_PM_CONTROL_MASK);
|
|
if (status) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"Could not enable Wake-on-lan\n");
|
|
dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
|
|
cmd.dma);
|
|
return status;
|
|
}
|
|
status = be_cmd_enable_magic_wol(adapter,
|
|
adapter->netdev->dev_addr,
|
|
&cmd);
|
|
pci_enable_wake(adapter->pdev, PCI_D3hot, 1);
|
|
pci_enable_wake(adapter->pdev, PCI_D3cold, 1);
|
|
} else {
|
|
status = be_cmd_enable_magic_wol(adapter, mac, &cmd);
|
|
pci_enable_wake(adapter->pdev, PCI_D3hot, 0);
|
|
pci_enable_wake(adapter->pdev, PCI_D3cold, 0);
|
|
}
|
|
|
|
dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Generate a seed MAC address from the PF MAC Address using jhash.
|
|
* MAC Address for VFs are assigned incrementally starting from the seed.
|
|
* These addresses are programmed in the ASIC by the PF and the VF driver
|
|
* queries for the MAC address during its probe.
|
|
*/
|
|
static int be_vf_eth_addr_config(struct be_adapter *adapter)
|
|
{
|
|
u32 vf;
|
|
int status = 0;
|
|
u8 mac[ETH_ALEN];
|
|
struct be_vf_cfg *vf_cfg;
|
|
|
|
be_vf_eth_addr_generate(adapter, mac);
|
|
|
|
for_all_vfs(adapter, vf_cfg, vf) {
|
|
if (BEx_chip(adapter))
|
|
status = be_cmd_pmac_add(adapter, mac,
|
|
vf_cfg->if_handle,
|
|
&vf_cfg->pmac_id, vf + 1);
|
|
else
|
|
status = be_cmd_set_mac(adapter, mac, vf_cfg->if_handle,
|
|
vf + 1);
|
|
|
|
if (status)
|
|
dev_err(&adapter->pdev->dev,
|
|
"Mac address assignment failed for VF %d\n",
|
|
vf);
|
|
else
|
|
memcpy(vf_cfg->mac_addr, mac, ETH_ALEN);
|
|
|
|
mac[5] += 1;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int be_vfs_mac_query(struct be_adapter *adapter)
|
|
{
|
|
int status, vf;
|
|
u8 mac[ETH_ALEN];
|
|
struct be_vf_cfg *vf_cfg;
|
|
|
|
for_all_vfs(adapter, vf_cfg, vf) {
|
|
status = be_cmd_get_active_mac(adapter, vf_cfg->pmac_id,
|
|
mac, vf_cfg->if_handle,
|
|
false, vf+1);
|
|
if (status)
|
|
return status;
|
|
memcpy(vf_cfg->mac_addr, mac, ETH_ALEN);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void be_vf_clear(struct be_adapter *adapter)
|
|
{
|
|
struct be_vf_cfg *vf_cfg;
|
|
u32 vf;
|
|
|
|
if (pci_vfs_assigned(adapter->pdev)) {
|
|
dev_warn(&adapter->pdev->dev,
|
|
"VFs are assigned to VMs: not disabling VFs\n");
|
|
goto done;
|
|
}
|
|
|
|
pci_disable_sriov(adapter->pdev);
|
|
|
|
for_all_vfs(adapter, vf_cfg, vf) {
|
|
if (BEx_chip(adapter))
|
|
be_cmd_pmac_del(adapter, vf_cfg->if_handle,
|
|
vf_cfg->pmac_id, vf + 1);
|
|
else
|
|
be_cmd_set_mac(adapter, NULL, vf_cfg->if_handle,
|
|
vf + 1);
|
|
|
|
be_cmd_if_destroy(adapter, vf_cfg->if_handle, vf + 1);
|
|
}
|
|
done:
|
|
kfree(adapter->vf_cfg);
|
|
adapter->num_vfs = 0;
|
|
adapter->flags &= ~BE_FLAGS_SRIOV_ENABLED;
|
|
}
|
|
|
|
static void be_clear_queues(struct be_adapter *adapter)
|
|
{
|
|
be_mcc_queues_destroy(adapter);
|
|
be_rx_cqs_destroy(adapter);
|
|
be_tx_queues_destroy(adapter);
|
|
be_evt_queues_destroy(adapter);
|
|
}
|
|
|
|
static void be_cancel_worker(struct be_adapter *adapter)
|
|
{
|
|
if (adapter->flags & BE_FLAGS_WORKER_SCHEDULED) {
|
|
cancel_delayed_work_sync(&adapter->work);
|
|
adapter->flags &= ~BE_FLAGS_WORKER_SCHEDULED;
|
|
}
|
|
}
|
|
|
|
static void be_mac_clear(struct be_adapter *adapter)
|
|
{
|
|
int i;
|
|
|
|
if (adapter->pmac_id) {
|
|
for (i = 0; i < (adapter->uc_macs + 1); i++)
|
|
be_cmd_pmac_del(adapter, adapter->if_handle,
|
|
adapter->pmac_id[i], 0);
|
|
adapter->uc_macs = 0;
|
|
|
|
kfree(adapter->pmac_id);
|
|
adapter->pmac_id = NULL;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_BE2NET_VXLAN
|
|
static void be_disable_vxlan_offloads(struct be_adapter *adapter)
|
|
{
|
|
if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS)
|
|
be_cmd_manage_iface(adapter, adapter->if_handle,
|
|
OP_CONVERT_TUNNEL_TO_NORMAL);
|
|
|
|
if (adapter->vxlan_port)
|
|
be_cmd_set_vxlan_port(adapter, 0);
|
|
|
|
adapter->flags &= ~BE_FLAGS_VXLAN_OFFLOADS;
|
|
adapter->vxlan_port = 0;
|
|
}
|
|
#endif
|
|
|
|
static int be_clear(struct be_adapter *adapter)
|
|
{
|
|
be_cancel_worker(adapter);
|
|
|
|
if (sriov_enabled(adapter))
|
|
be_vf_clear(adapter);
|
|
|
|
/* Re-configure FW to distribute resources evenly across max-supported
|
|
* number of VFs, only when VFs are not already enabled.
|
|
*/
|
|
if (be_physfn(adapter) && !pci_vfs_assigned(adapter->pdev))
|
|
be_cmd_set_sriov_config(adapter, adapter->pool_res,
|
|
pci_sriov_get_totalvfs(adapter->pdev));
|
|
|
|
#ifdef CONFIG_BE2NET_VXLAN
|
|
be_disable_vxlan_offloads(adapter);
|
|
#endif
|
|
/* delete the primary mac along with the uc-mac list */
|
|
be_mac_clear(adapter);
|
|
|
|
be_cmd_if_destroy(adapter, adapter->if_handle, 0);
|
|
|
|
be_clear_queues(adapter);
|
|
|
|
be_msix_disable(adapter);
|
|
adapter->flags &= ~BE_FLAGS_SETUP_DONE;
|
|
return 0;
|
|
}
|
|
|
|
static int be_vfs_if_create(struct be_adapter *adapter)
|
|
{
|
|
struct be_resources res = {0};
|
|
struct be_vf_cfg *vf_cfg;
|
|
u32 cap_flags, en_flags, vf;
|
|
int status = 0;
|
|
|
|
cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
|
|
BE_IF_FLAGS_MULTICAST;
|
|
|
|
for_all_vfs(adapter, vf_cfg, vf) {
|
|
if (!BE3_chip(adapter)) {
|
|
status = be_cmd_get_profile_config(adapter, &res,
|
|
vf + 1);
|
|
if (!status)
|
|
cap_flags = res.if_cap_flags;
|
|
}
|
|
|
|
/* If a FW profile exists, then cap_flags are updated */
|
|
en_flags = cap_flags & (BE_IF_FLAGS_UNTAGGED |
|
|
BE_IF_FLAGS_BROADCAST |
|
|
BE_IF_FLAGS_MULTICAST);
|
|
status =
|
|
be_cmd_if_create(adapter, cap_flags, en_flags,
|
|
&vf_cfg->if_handle, vf + 1);
|
|
if (status)
|
|
goto err;
|
|
}
|
|
err:
|
|
return status;
|
|
}
|
|
|
|
static int be_vf_setup_init(struct be_adapter *adapter)
|
|
{
|
|
struct be_vf_cfg *vf_cfg;
|
|
int vf;
|
|
|
|
adapter->vf_cfg = kcalloc(adapter->num_vfs, sizeof(*vf_cfg),
|
|
GFP_KERNEL);
|
|
if (!adapter->vf_cfg)
|
|
return -ENOMEM;
|
|
|
|
for_all_vfs(adapter, vf_cfg, vf) {
|
|
vf_cfg->if_handle = -1;
|
|
vf_cfg->pmac_id = -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int be_vf_setup(struct be_adapter *adapter)
|
|
{
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct be_vf_cfg *vf_cfg;
|
|
int status, old_vfs, vf;
|
|
u32 privileges;
|
|
|
|
old_vfs = pci_num_vf(adapter->pdev);
|
|
|
|
status = be_vf_setup_init(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
if (old_vfs) {
|
|
for_all_vfs(adapter, vf_cfg, vf) {
|
|
status = be_cmd_get_if_id(adapter, vf_cfg, vf);
|
|
if (status)
|
|
goto err;
|
|
}
|
|
|
|
status = be_vfs_mac_query(adapter);
|
|
if (status)
|
|
goto err;
|
|
} else {
|
|
status = be_vfs_if_create(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = be_vf_eth_addr_config(adapter);
|
|
if (status)
|
|
goto err;
|
|
}
|
|
|
|
for_all_vfs(adapter, vf_cfg, vf) {
|
|
/* Allow VFs to programs MAC/VLAN filters */
|
|
status = be_cmd_get_fn_privileges(adapter, &privileges, vf + 1);
|
|
if (!status && !(privileges & BE_PRIV_FILTMGMT)) {
|
|
status = be_cmd_set_fn_privileges(adapter,
|
|
privileges |
|
|
BE_PRIV_FILTMGMT,
|
|
vf + 1);
|
|
if (!status)
|
|
dev_info(dev, "VF%d has FILTMGMT privilege\n",
|
|
vf);
|
|
}
|
|
|
|
/* Allow full available bandwidth */
|
|
if (!old_vfs)
|
|
be_cmd_config_qos(adapter, 0, 0, vf + 1);
|
|
|
|
if (!old_vfs) {
|
|
be_cmd_enable_vf(adapter, vf + 1);
|
|
be_cmd_set_logical_link_config(adapter,
|
|
IFLA_VF_LINK_STATE_AUTO,
|
|
vf+1);
|
|
}
|
|
}
|
|
|
|
if (!old_vfs) {
|
|
status = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
|
|
if (status) {
|
|
dev_err(dev, "SRIOV enable failed\n");
|
|
adapter->num_vfs = 0;
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
adapter->flags |= BE_FLAGS_SRIOV_ENABLED;
|
|
return 0;
|
|
err:
|
|
dev_err(dev, "VF setup failed\n");
|
|
be_vf_clear(adapter);
|
|
return status;
|
|
}
|
|
|
|
/* Converting function_mode bits on BE3 to SH mc_type enums */
|
|
|
|
static u8 be_convert_mc_type(u32 function_mode)
|
|
{
|
|
if (function_mode & VNIC_MODE && function_mode & QNQ_MODE)
|
|
return vNIC1;
|
|
else if (function_mode & QNQ_MODE)
|
|
return FLEX10;
|
|
else if (function_mode & VNIC_MODE)
|
|
return vNIC2;
|
|
else if (function_mode & UMC_ENABLED)
|
|
return UMC;
|
|
else
|
|
return MC_NONE;
|
|
}
|
|
|
|
/* On BE2/BE3 FW does not suggest the supported limits */
|
|
static void BEx_get_resources(struct be_adapter *adapter,
|
|
struct be_resources *res)
|
|
{
|
|
bool use_sriov = adapter->num_vfs ? 1 : 0;
|
|
|
|
if (be_physfn(adapter))
|
|
res->max_uc_mac = BE_UC_PMAC_COUNT;
|
|
else
|
|
res->max_uc_mac = BE_VF_UC_PMAC_COUNT;
|
|
|
|
adapter->mc_type = be_convert_mc_type(adapter->function_mode);
|
|
|
|
if (be_is_mc(adapter)) {
|
|
/* Assuming that there are 4 channels per port,
|
|
* when multi-channel is enabled
|
|
*/
|
|
if (be_is_qnq_mode(adapter))
|
|
res->max_vlans = BE_NUM_VLANS_SUPPORTED/8;
|
|
else
|
|
/* In a non-qnq multichannel mode, the pvid
|
|
* takes up one vlan entry
|
|
*/
|
|
res->max_vlans = (BE_NUM_VLANS_SUPPORTED / 4) - 1;
|
|
} else {
|
|
res->max_vlans = BE_NUM_VLANS_SUPPORTED;
|
|
}
|
|
|
|
res->max_mcast_mac = BE_MAX_MC;
|
|
|
|
/* 1) For BE3 1Gb ports, FW does not support multiple TXQs
|
|
* 2) Create multiple TX rings on a BE3-R multi-channel interface
|
|
* *only* if it is RSS-capable.
|
|
*/
|
|
if (BE2_chip(adapter) || use_sriov || (adapter->port_num > 1) ||
|
|
!be_physfn(adapter) || (be_is_mc(adapter) &&
|
|
!(adapter->function_caps & BE_FUNCTION_CAPS_RSS))) {
|
|
res->max_tx_qs = 1;
|
|
} else if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) {
|
|
struct be_resources super_nic_res = {0};
|
|
|
|
/* On a SuperNIC profile, the driver needs to use the
|
|
* GET_PROFILE_CONFIG cmd to query the per-function TXQ limits
|
|
*/
|
|
be_cmd_get_profile_config(adapter, &super_nic_res, 0);
|
|
/* Some old versions of BE3 FW don't report max_tx_qs value */
|
|
res->max_tx_qs = super_nic_res.max_tx_qs ? : BE3_MAX_TX_QS;
|
|
} else {
|
|
res->max_tx_qs = BE3_MAX_TX_QS;
|
|
}
|
|
|
|
if ((adapter->function_caps & BE_FUNCTION_CAPS_RSS) &&
|
|
!use_sriov && be_physfn(adapter))
|
|
res->max_rss_qs = (adapter->be3_native) ?
|
|
BE3_MAX_RSS_QS : BE2_MAX_RSS_QS;
|
|
res->max_rx_qs = res->max_rss_qs + 1;
|
|
|
|
if (be_physfn(adapter))
|
|
res->max_evt_qs = (be_max_vfs(adapter) > 0) ?
|
|
BE3_SRIOV_MAX_EVT_QS : BE3_MAX_EVT_QS;
|
|
else
|
|
res->max_evt_qs = 1;
|
|
|
|
res->if_cap_flags = BE_IF_CAP_FLAGS_WANT;
|
|
if (!(adapter->function_caps & BE_FUNCTION_CAPS_RSS))
|
|
res->if_cap_flags &= ~BE_IF_FLAGS_RSS;
|
|
}
|
|
|
|
static void be_setup_init(struct be_adapter *adapter)
|
|
{
|
|
adapter->vlan_prio_bmap = 0xff;
|
|
adapter->phy.link_speed = -1;
|
|
adapter->if_handle = -1;
|
|
adapter->be3_native = false;
|
|
adapter->promiscuous = false;
|
|
if (be_physfn(adapter))
|
|
adapter->cmd_privileges = MAX_PRIVILEGES;
|
|
else
|
|
adapter->cmd_privileges = MIN_PRIVILEGES;
|
|
}
|
|
|
|
static int be_get_sriov_config(struct be_adapter *adapter)
|
|
{
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct be_resources res = {0};
|
|
int max_vfs, old_vfs;
|
|
|
|
/* Some old versions of BE3 FW don't report max_vfs value */
|
|
be_cmd_get_profile_config(adapter, &res, 0);
|
|
|
|
if (BE3_chip(adapter) && !res.max_vfs) {
|
|
max_vfs = pci_sriov_get_totalvfs(adapter->pdev);
|
|
res.max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0;
|
|
}
|
|
|
|
adapter->pool_res = res;
|
|
|
|
if (!be_max_vfs(adapter)) {
|
|
if (num_vfs)
|
|
dev_warn(dev, "SRIOV is disabled. Ignoring num_vfs\n");
|
|
adapter->num_vfs = 0;
|
|
return 0;
|
|
}
|
|
|
|
pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter));
|
|
|
|
/* validate num_vfs module param */
|
|
old_vfs = pci_num_vf(adapter->pdev);
|
|
if (old_vfs) {
|
|
dev_info(dev, "%d VFs are already enabled\n", old_vfs);
|
|
if (old_vfs != num_vfs)
|
|
dev_warn(dev, "Ignoring num_vfs=%d setting\n", num_vfs);
|
|
adapter->num_vfs = old_vfs;
|
|
} else {
|
|
if (num_vfs > be_max_vfs(adapter)) {
|
|
dev_info(dev, "Resources unavailable to init %d VFs\n",
|
|
num_vfs);
|
|
dev_info(dev, "Limiting to %d VFs\n",
|
|
be_max_vfs(adapter));
|
|
}
|
|
adapter->num_vfs = min_t(u16, num_vfs, be_max_vfs(adapter));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int be_get_resources(struct be_adapter *adapter)
|
|
{
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct be_resources res = {0};
|
|
int status;
|
|
|
|
if (BEx_chip(adapter)) {
|
|
BEx_get_resources(adapter, &res);
|
|
adapter->res = res;
|
|
}
|
|
|
|
/* For Lancer, SH etc read per-function resource limits from FW.
|
|
* GET_FUNC_CONFIG returns per function guaranteed limits.
|
|
* GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits
|
|
*/
|
|
if (!BEx_chip(adapter)) {
|
|
status = be_cmd_get_func_config(adapter, &res);
|
|
if (status)
|
|
return status;
|
|
|
|
/* If RoCE may be enabled stash away half the EQs for RoCE */
|
|
if (be_roce_supported(adapter))
|
|
res.max_evt_qs /= 2;
|
|
adapter->res = res;
|
|
}
|
|
|
|
dev_info(dev, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n",
|
|
be_max_txqs(adapter), be_max_rxqs(adapter),
|
|
be_max_rss(adapter), be_max_eqs(adapter),
|
|
be_max_vfs(adapter));
|
|
dev_info(dev, "Max: uc-macs %d, mc-macs %d, vlans %d\n",
|
|
be_max_uc(adapter), be_max_mc(adapter),
|
|
be_max_vlans(adapter));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void be_sriov_config(struct be_adapter *adapter)
|
|
{
|
|
struct device *dev = &adapter->pdev->dev;
|
|
int status;
|
|
|
|
status = be_get_sriov_config(adapter);
|
|
if (status) {
|
|
dev_err(dev, "Failed to query SR-IOV configuration\n");
|
|
dev_err(dev, "SR-IOV cannot be enabled\n");
|
|
return;
|
|
}
|
|
|
|
/* When the HW is in SRIOV capable configuration, the PF-pool
|
|
* resources are equally distributed across the max-number of
|
|
* VFs. The user may request only a subset of the max-vfs to be
|
|
* enabled. Based on num_vfs, redistribute the resources across
|
|
* num_vfs so that each VF will have access to more number of
|
|
* resources. This facility is not available in BE3 FW.
|
|
* Also, this is done by FW in Lancer chip.
|
|
*/
|
|
if (be_max_vfs(adapter) && !pci_num_vf(adapter->pdev)) {
|
|
status = be_cmd_set_sriov_config(adapter,
|
|
adapter->pool_res,
|
|
adapter->num_vfs);
|
|
if (status)
|
|
dev_err(dev, "Failed to optimize SR-IOV resources\n");
|
|
}
|
|
}
|
|
|
|
static int be_get_config(struct be_adapter *adapter)
|
|
{
|
|
u16 profile_id;
|
|
int status;
|
|
|
|
status = be_cmd_query_fw_cfg(adapter);
|
|
if (status)
|
|
return status;
|
|
|
|
if (be_physfn(adapter)) {
|
|
status = be_cmd_get_active_profile(adapter, &profile_id);
|
|
if (!status)
|
|
dev_info(&adapter->pdev->dev,
|
|
"Using profile 0x%x\n", profile_id);
|
|
}
|
|
|
|
if (!BE2_chip(adapter) && be_physfn(adapter))
|
|
be_sriov_config(adapter);
|
|
|
|
status = be_get_resources(adapter);
|
|
if (status)
|
|
return status;
|
|
|
|
adapter->pmac_id = kcalloc(be_max_uc(adapter),
|
|
sizeof(*adapter->pmac_id), GFP_KERNEL);
|
|
if (!adapter->pmac_id)
|
|
return -ENOMEM;
|
|
|
|
/* Sanitize cfg_num_qs based on HW and platform limits */
|
|
adapter->cfg_num_qs = min(adapter->cfg_num_qs, be_max_qs(adapter));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int be_mac_setup(struct be_adapter *adapter)
|
|
{
|
|
u8 mac[ETH_ALEN];
|
|
int status;
|
|
|
|
if (is_zero_ether_addr(adapter->netdev->dev_addr)) {
|
|
status = be_cmd_get_perm_mac(adapter, mac);
|
|
if (status)
|
|
return status;
|
|
|
|
memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN);
|
|
memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN);
|
|
} else {
|
|
/* Maybe the HW was reset; dev_addr must be re-programmed */
|
|
memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN);
|
|
}
|
|
|
|
/* For BE3-R VFs, the PF programs the initial MAC address */
|
|
if (!(BEx_chip(adapter) && be_virtfn(adapter)))
|
|
be_cmd_pmac_add(adapter, mac, adapter->if_handle,
|
|
&adapter->pmac_id[0], 0);
|
|
return 0;
|
|
}
|
|
|
|
static void be_schedule_worker(struct be_adapter *adapter)
|
|
{
|
|
schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
|
|
adapter->flags |= BE_FLAGS_WORKER_SCHEDULED;
|
|
}
|
|
|
|
static int be_setup_queues(struct be_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
int status;
|
|
|
|
status = be_evt_queues_create(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = be_tx_qs_create(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = be_rx_cqs_create(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = be_mcc_queues_create(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = netif_set_real_num_rx_queues(netdev, adapter->num_rx_qs);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = netif_set_real_num_tx_queues(netdev, adapter->num_tx_qs);
|
|
if (status)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_err(&adapter->pdev->dev, "queue_setup failed\n");
|
|
return status;
|
|
}
|
|
|
|
int be_update_queues(struct be_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
int status;
|
|
|
|
if (netif_running(netdev))
|
|
be_close(netdev);
|
|
|
|
be_cancel_worker(adapter);
|
|
|
|
/* If any vectors have been shared with RoCE we cannot re-program
|
|
* the MSIx table.
|
|
*/
|
|
if (!adapter->num_msix_roce_vec)
|
|
be_msix_disable(adapter);
|
|
|
|
be_clear_queues(adapter);
|
|
|
|
if (!msix_enabled(adapter)) {
|
|
status = be_msix_enable(adapter);
|
|
if (status)
|
|
return status;
|
|
}
|
|
|
|
status = be_setup_queues(adapter);
|
|
if (status)
|
|
return status;
|
|
|
|
be_schedule_worker(adapter);
|
|
|
|
if (netif_running(netdev))
|
|
status = be_open(netdev);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int be_setup(struct be_adapter *adapter)
|
|
{
|
|
struct device *dev = &adapter->pdev->dev;
|
|
u32 tx_fc, rx_fc, en_flags;
|
|
int status;
|
|
|
|
be_setup_init(adapter);
|
|
|
|
if (!lancer_chip(adapter))
|
|
be_cmd_req_native_mode(adapter);
|
|
|
|
status = be_get_config(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = be_msix_enable(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
|
|
BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS;
|
|
if (adapter->function_caps & BE_FUNCTION_CAPS_RSS)
|
|
en_flags |= BE_IF_FLAGS_RSS;
|
|
en_flags = en_flags & be_if_cap_flags(adapter);
|
|
status = be_cmd_if_create(adapter, be_if_cap_flags(adapter), en_flags,
|
|
&adapter->if_handle, 0);
|
|
if (status)
|
|
goto err;
|
|
|
|
/* Updating real_num_tx/rx_queues() requires rtnl_lock() */
|
|
rtnl_lock();
|
|
status = be_setup_queues(adapter);
|
|
rtnl_unlock();
|
|
if (status)
|
|
goto err;
|
|
|
|
be_cmd_get_fn_privileges(adapter, &adapter->cmd_privileges, 0);
|
|
|
|
status = be_mac_setup(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
be_cmd_get_fw_ver(adapter);
|
|
dev_info(dev, "FW version is %s\n", adapter->fw_ver);
|
|
|
|
if (BE2_chip(adapter) && fw_major_num(adapter->fw_ver) < 4) {
|
|
dev_err(dev, "Firmware on card is old(%s), IRQs may not work",
|
|
adapter->fw_ver);
|
|
dev_err(dev, "Please upgrade firmware to version >= 4.0\n");
|
|
}
|
|
|
|
if (adapter->vlans_added)
|
|
be_vid_config(adapter);
|
|
|
|
be_set_rx_mode(adapter->netdev);
|
|
|
|
be_cmd_get_acpi_wol_cap(adapter);
|
|
|
|
be_cmd_get_flow_control(adapter, &tx_fc, &rx_fc);
|
|
|
|
if (rx_fc != adapter->rx_fc || tx_fc != adapter->tx_fc)
|
|
be_cmd_set_flow_control(adapter, adapter->tx_fc,
|
|
adapter->rx_fc);
|
|
|
|
if (be_physfn(adapter))
|
|
be_cmd_set_logical_link_config(adapter,
|
|
IFLA_VF_LINK_STATE_AUTO, 0);
|
|
|
|
if (adapter->num_vfs)
|
|
be_vf_setup(adapter);
|
|
|
|
status = be_cmd_get_phy_info(adapter);
|
|
if (!status && be_pause_supported(adapter))
|
|
adapter->phy.fc_autoneg = 1;
|
|
|
|
be_schedule_worker(adapter);
|
|
adapter->flags |= BE_FLAGS_SETUP_DONE;
|
|
return 0;
|
|
err:
|
|
be_clear(adapter);
|
|
return status;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void be_netpoll(struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct be_eq_obj *eqo;
|
|
int i;
|
|
|
|
for_all_evt_queues(adapter, eqo, i) {
|
|
be_eq_notify(eqo->adapter, eqo->q.id, false, true, 0);
|
|
napi_schedule(&eqo->napi);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static char flash_cookie[2][16] = {"*** SE FLAS", "H DIRECTORY *** "};
|
|
|
|
static bool phy_flashing_required(struct be_adapter *adapter)
|
|
{
|
|
return (adapter->phy.phy_type == TN_8022 &&
|
|
adapter->phy.interface_type == PHY_TYPE_BASET_10GB);
|
|
}
|
|
|
|
static bool is_comp_in_ufi(struct be_adapter *adapter,
|
|
struct flash_section_info *fsec, int type)
|
|
{
|
|
int i = 0, img_type = 0;
|
|
struct flash_section_info_g2 *fsec_g2 = NULL;
|
|
|
|
if (BE2_chip(adapter))
|
|
fsec_g2 = (struct flash_section_info_g2 *)fsec;
|
|
|
|
for (i = 0; i < MAX_FLASH_COMP; i++) {
|
|
if (fsec_g2)
|
|
img_type = le32_to_cpu(fsec_g2->fsec_entry[i].type);
|
|
else
|
|
img_type = le32_to_cpu(fsec->fsec_entry[i].type);
|
|
|
|
if (img_type == type)
|
|
return true;
|
|
}
|
|
return false;
|
|
|
|
}
|
|
|
|
static struct flash_section_info *get_fsec_info(struct be_adapter *adapter,
|
|
int header_size,
|
|
const struct firmware *fw)
|
|
{
|
|
struct flash_section_info *fsec = NULL;
|
|
const u8 *p = fw->data;
|
|
|
|
p += header_size;
|
|
while (p < (fw->data + fw->size)) {
|
|
fsec = (struct flash_section_info *)p;
|
|
if (!memcmp(flash_cookie, fsec->cookie, sizeof(flash_cookie)))
|
|
return fsec;
|
|
p += 32;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static int be_check_flash_crc(struct be_adapter *adapter, const u8 *p,
|
|
u32 img_offset, u32 img_size, int hdr_size,
|
|
u16 img_optype, bool *crc_match)
|
|
{
|
|
u32 crc_offset;
|
|
int status;
|
|
u8 crc[4];
|
|
|
|
status = be_cmd_get_flash_crc(adapter, crc, img_optype, img_size - 4);
|
|
if (status)
|
|
return status;
|
|
|
|
crc_offset = hdr_size + img_offset + img_size - 4;
|
|
|
|
/* Skip flashing, if crc of flashed region matches */
|
|
if (!memcmp(crc, p + crc_offset, 4))
|
|
*crc_match = true;
|
|
else
|
|
*crc_match = false;
|
|
|
|
return status;
|
|
}
|
|
|
|
static int be_flash(struct be_adapter *adapter, const u8 *img,
|
|
struct be_dma_mem *flash_cmd, int optype, int img_size)
|
|
{
|
|
struct be_cmd_write_flashrom *req = flash_cmd->va;
|
|
u32 total_bytes, flash_op, num_bytes;
|
|
int status;
|
|
|
|
total_bytes = img_size;
|
|
while (total_bytes) {
|
|
num_bytes = min_t(u32, 32*1024, total_bytes);
|
|
|
|
total_bytes -= num_bytes;
|
|
|
|
if (!total_bytes) {
|
|
if (optype == OPTYPE_PHY_FW)
|
|
flash_op = FLASHROM_OPER_PHY_FLASH;
|
|
else
|
|
flash_op = FLASHROM_OPER_FLASH;
|
|
} else {
|
|
if (optype == OPTYPE_PHY_FW)
|
|
flash_op = FLASHROM_OPER_PHY_SAVE;
|
|
else
|
|
flash_op = FLASHROM_OPER_SAVE;
|
|
}
|
|
|
|
memcpy(req->data_buf, img, num_bytes);
|
|
img += num_bytes;
|
|
status = be_cmd_write_flashrom(adapter, flash_cmd, optype,
|
|
flash_op, num_bytes);
|
|
if (base_status(status) == MCC_STATUS_ILLEGAL_REQUEST &&
|
|
optype == OPTYPE_PHY_FW)
|
|
break;
|
|
else if (status)
|
|
return status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* For BE2, BE3 and BE3-R */
|
|
static int be_flash_BEx(struct be_adapter *adapter,
|
|
const struct firmware *fw,
|
|
struct be_dma_mem *flash_cmd, int num_of_images)
|
|
{
|
|
int img_hdrs_size = (num_of_images * sizeof(struct image_hdr));
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct flash_section_info *fsec = NULL;
|
|
int status, i, filehdr_size, num_comp;
|
|
const struct flash_comp *pflashcomp;
|
|
bool crc_match;
|
|
const u8 *p;
|
|
|
|
struct flash_comp gen3_flash_types[] = {
|
|
{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, OPTYPE_ISCSI_ACTIVE,
|
|
FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_iSCSI},
|
|
{ FLASH_REDBOOT_START_g3, OPTYPE_REDBOOT,
|
|
FLASH_REDBOOT_IMAGE_MAX_SIZE_g3, IMAGE_BOOT_CODE},
|
|
{ FLASH_iSCSI_BIOS_START_g3, OPTYPE_BIOS,
|
|
FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_ISCSI},
|
|
{ FLASH_PXE_BIOS_START_g3, OPTYPE_PXE_BIOS,
|
|
FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_PXE},
|
|
{ FLASH_FCoE_BIOS_START_g3, OPTYPE_FCOE_BIOS,
|
|
FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_FCoE},
|
|
{ FLASH_iSCSI_BACKUP_IMAGE_START_g3, OPTYPE_ISCSI_BACKUP,
|
|
FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_BACKUP_iSCSI},
|
|
{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, OPTYPE_FCOE_FW_ACTIVE,
|
|
FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_FCoE},
|
|
{ FLASH_FCoE_BACKUP_IMAGE_START_g3, OPTYPE_FCOE_FW_BACKUP,
|
|
FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_BACKUP_FCoE},
|
|
{ FLASH_NCSI_START_g3, OPTYPE_NCSI_FW,
|
|
FLASH_NCSI_IMAGE_MAX_SIZE_g3, IMAGE_NCSI},
|
|
{ FLASH_PHY_FW_START_g3, OPTYPE_PHY_FW,
|
|
FLASH_PHY_FW_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_PHY}
|
|
};
|
|
|
|
struct flash_comp gen2_flash_types[] = {
|
|
{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, OPTYPE_ISCSI_ACTIVE,
|
|
FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_iSCSI},
|
|
{ FLASH_REDBOOT_START_g2, OPTYPE_REDBOOT,
|
|
FLASH_REDBOOT_IMAGE_MAX_SIZE_g2, IMAGE_BOOT_CODE},
|
|
{ FLASH_iSCSI_BIOS_START_g2, OPTYPE_BIOS,
|
|
FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_ISCSI},
|
|
{ FLASH_PXE_BIOS_START_g2, OPTYPE_PXE_BIOS,
|
|
FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_PXE},
|
|
{ FLASH_FCoE_BIOS_START_g2, OPTYPE_FCOE_BIOS,
|
|
FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_FCoE},
|
|
{ FLASH_iSCSI_BACKUP_IMAGE_START_g2, OPTYPE_ISCSI_BACKUP,
|
|
FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_BACKUP_iSCSI},
|
|
{ FLASH_FCoE_PRIMARY_IMAGE_START_g2, OPTYPE_FCOE_FW_ACTIVE,
|
|
FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_FCoE},
|
|
{ FLASH_FCoE_BACKUP_IMAGE_START_g2, OPTYPE_FCOE_FW_BACKUP,
|
|
FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_BACKUP_FCoE}
|
|
};
|
|
|
|
if (BE3_chip(adapter)) {
|
|
pflashcomp = gen3_flash_types;
|
|
filehdr_size = sizeof(struct flash_file_hdr_g3);
|
|
num_comp = ARRAY_SIZE(gen3_flash_types);
|
|
} else {
|
|
pflashcomp = gen2_flash_types;
|
|
filehdr_size = sizeof(struct flash_file_hdr_g2);
|
|
num_comp = ARRAY_SIZE(gen2_flash_types);
|
|
}
|
|
|
|
/* Get flash section info*/
|
|
fsec = get_fsec_info(adapter, filehdr_size + img_hdrs_size, fw);
|
|
if (!fsec) {
|
|
dev_err(dev, "Invalid Cookie. FW image may be corrupted\n");
|
|
return -1;
|
|
}
|
|
for (i = 0; i < num_comp; i++) {
|
|
if (!is_comp_in_ufi(adapter, fsec, pflashcomp[i].img_type))
|
|
continue;
|
|
|
|
if ((pflashcomp[i].optype == OPTYPE_NCSI_FW) &&
|
|
memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0)
|
|
continue;
|
|
|
|
if (pflashcomp[i].optype == OPTYPE_PHY_FW &&
|
|
!phy_flashing_required(adapter))
|
|
continue;
|
|
|
|
if (pflashcomp[i].optype == OPTYPE_REDBOOT) {
|
|
status = be_check_flash_crc(adapter, fw->data,
|
|
pflashcomp[i].offset,
|
|
pflashcomp[i].size,
|
|
filehdr_size +
|
|
img_hdrs_size,
|
|
OPTYPE_REDBOOT, &crc_match);
|
|
if (status) {
|
|
dev_err(dev,
|
|
"Could not get CRC for 0x%x region\n",
|
|
pflashcomp[i].optype);
|
|
continue;
|
|
}
|
|
|
|
if (crc_match)
|
|
continue;
|
|
}
|
|
|
|
p = fw->data + filehdr_size + pflashcomp[i].offset +
|
|
img_hdrs_size;
|
|
if (p + pflashcomp[i].size > fw->data + fw->size)
|
|
return -1;
|
|
|
|
status = be_flash(adapter, p, flash_cmd, pflashcomp[i].optype,
|
|
pflashcomp[i].size);
|
|
if (status) {
|
|
dev_err(dev, "Flashing section type 0x%x failed\n",
|
|
pflashcomp[i].img_type);
|
|
return status;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u16 be_get_img_optype(struct flash_section_entry fsec_entry)
|
|
{
|
|
u32 img_type = le32_to_cpu(fsec_entry.type);
|
|
u16 img_optype = le16_to_cpu(fsec_entry.optype);
|
|
|
|
if (img_optype != 0xFFFF)
|
|
return img_optype;
|
|
|
|
switch (img_type) {
|
|
case IMAGE_FIRMWARE_iSCSI:
|
|
img_optype = OPTYPE_ISCSI_ACTIVE;
|
|
break;
|
|
case IMAGE_BOOT_CODE:
|
|
img_optype = OPTYPE_REDBOOT;
|
|
break;
|
|
case IMAGE_OPTION_ROM_ISCSI:
|
|
img_optype = OPTYPE_BIOS;
|
|
break;
|
|
case IMAGE_OPTION_ROM_PXE:
|
|
img_optype = OPTYPE_PXE_BIOS;
|
|
break;
|
|
case IMAGE_OPTION_ROM_FCoE:
|
|
img_optype = OPTYPE_FCOE_BIOS;
|
|
break;
|
|
case IMAGE_FIRMWARE_BACKUP_iSCSI:
|
|
img_optype = OPTYPE_ISCSI_BACKUP;
|
|
break;
|
|
case IMAGE_NCSI:
|
|
img_optype = OPTYPE_NCSI_FW;
|
|
break;
|
|
case IMAGE_FLASHISM_JUMPVECTOR:
|
|
img_optype = OPTYPE_FLASHISM_JUMPVECTOR;
|
|
break;
|
|
case IMAGE_FIRMWARE_PHY:
|
|
img_optype = OPTYPE_SH_PHY_FW;
|
|
break;
|
|
case IMAGE_REDBOOT_DIR:
|
|
img_optype = OPTYPE_REDBOOT_DIR;
|
|
break;
|
|
case IMAGE_REDBOOT_CONFIG:
|
|
img_optype = OPTYPE_REDBOOT_CONFIG;
|
|
break;
|
|
case IMAGE_UFI_DIR:
|
|
img_optype = OPTYPE_UFI_DIR;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return img_optype;
|
|
}
|
|
|
|
static int be_flash_skyhawk(struct be_adapter *adapter,
|
|
const struct firmware *fw,
|
|
struct be_dma_mem *flash_cmd, int num_of_images)
|
|
{
|
|
int img_hdrs_size = num_of_images * sizeof(struct image_hdr);
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct flash_section_info *fsec = NULL;
|
|
u32 img_offset, img_size, img_type;
|
|
int status, i, filehdr_size;
|
|
bool crc_match, old_fw_img;
|
|
u16 img_optype;
|
|
const u8 *p;
|
|
|
|
filehdr_size = sizeof(struct flash_file_hdr_g3);
|
|
fsec = get_fsec_info(adapter, filehdr_size + img_hdrs_size, fw);
|
|
if (!fsec) {
|
|
dev_err(dev, "Invalid Cookie. FW image may be corrupted\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < le32_to_cpu(fsec->fsec_hdr.num_images); i++) {
|
|
img_offset = le32_to_cpu(fsec->fsec_entry[i].offset);
|
|
img_size = le32_to_cpu(fsec->fsec_entry[i].pad_size);
|
|
img_type = le32_to_cpu(fsec->fsec_entry[i].type);
|
|
img_optype = be_get_img_optype(fsec->fsec_entry[i]);
|
|
old_fw_img = fsec->fsec_entry[i].optype == 0xFFFF;
|
|
|
|
if (img_optype == 0xFFFF)
|
|
continue;
|
|
/* Don't bother verifying CRC if an old FW image is being
|
|
* flashed
|
|
*/
|
|
if (old_fw_img)
|
|
goto flash;
|
|
|
|
status = be_check_flash_crc(adapter, fw->data, img_offset,
|
|
img_size, filehdr_size +
|
|
img_hdrs_size, img_optype,
|
|
&crc_match);
|
|
/* The current FW image on the card does not recognize the new
|
|
* FLASH op_type. The FW download is partially complete.
|
|
* Reboot the server now to enable FW image to recognize the
|
|
* new FLASH op_type. To complete the remaining process,
|
|
* download the same FW again after the reboot.
|
|
*/
|
|
if (base_status(status) == MCC_STATUS_ILLEGAL_REQUEST ||
|
|
base_status(status) == MCC_STATUS_ILLEGAL_FIELD) {
|
|
dev_err(dev, "Flash incomplete. Reset the server\n");
|
|
dev_err(dev, "Download FW image again after reset\n");
|
|
return -EAGAIN;
|
|
} else if (status) {
|
|
dev_err(dev, "Could not get CRC for 0x%x region\n",
|
|
img_optype);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (crc_match)
|
|
continue;
|
|
|
|
flash:
|
|
p = fw->data + filehdr_size + img_offset + img_hdrs_size;
|
|
if (p + img_size > fw->data + fw->size)
|
|
return -1;
|
|
|
|
status = be_flash(adapter, p, flash_cmd, img_optype, img_size);
|
|
/* For old FW images ignore ILLEGAL_FIELD error or errors on
|
|
* UFI_DIR region
|
|
*/
|
|
if (old_fw_img &&
|
|
(base_status(status) == MCC_STATUS_ILLEGAL_FIELD ||
|
|
(img_optype == OPTYPE_UFI_DIR &&
|
|
base_status(status) == MCC_STATUS_FAILED))) {
|
|
continue;
|
|
} else if (status) {
|
|
dev_err(dev, "Flashing section type 0x%x failed\n",
|
|
img_type);
|
|
return -EFAULT;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lancer_fw_download(struct be_adapter *adapter,
|
|
const struct firmware *fw)
|
|
{
|
|
#define LANCER_FW_DOWNLOAD_CHUNK (32 * 1024)
|
|
#define LANCER_FW_DOWNLOAD_LOCATION "/prg"
|
|
struct device *dev = &adapter->pdev->dev;
|
|
struct be_dma_mem flash_cmd;
|
|
const u8 *data_ptr = NULL;
|
|
u8 *dest_image_ptr = NULL;
|
|
size_t image_size = 0;
|
|
u32 chunk_size = 0;
|
|
u32 data_written = 0;
|
|
u32 offset = 0;
|
|
int status = 0;
|
|
u8 add_status = 0;
|
|
u8 change_status;
|
|
|
|
if (!IS_ALIGNED(fw->size, sizeof(u32))) {
|
|
dev_err(dev, "FW image size should be multiple of 4\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
flash_cmd.size = sizeof(struct lancer_cmd_req_write_object)
|
|
+ LANCER_FW_DOWNLOAD_CHUNK;
|
|
flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size,
|
|
&flash_cmd.dma, GFP_KERNEL);
|
|
if (!flash_cmd.va)
|
|
return -ENOMEM;
|
|
|
|
dest_image_ptr = flash_cmd.va +
|
|
sizeof(struct lancer_cmd_req_write_object);
|
|
image_size = fw->size;
|
|
data_ptr = fw->data;
|
|
|
|
while (image_size) {
|
|
chunk_size = min_t(u32, image_size, LANCER_FW_DOWNLOAD_CHUNK);
|
|
|
|
/* Copy the image chunk content. */
|
|
memcpy(dest_image_ptr, data_ptr, chunk_size);
|
|
|
|
status = lancer_cmd_write_object(adapter, &flash_cmd,
|
|
chunk_size, offset,
|
|
LANCER_FW_DOWNLOAD_LOCATION,
|
|
&data_written, &change_status,
|
|
&add_status);
|
|
if (status)
|
|
break;
|
|
|
|
offset += data_written;
|
|
data_ptr += data_written;
|
|
image_size -= data_written;
|
|
}
|
|
|
|
if (!status) {
|
|
/* Commit the FW written */
|
|
status = lancer_cmd_write_object(adapter, &flash_cmd,
|
|
0, offset,
|
|
LANCER_FW_DOWNLOAD_LOCATION,
|
|
&data_written, &change_status,
|
|
&add_status);
|
|
}
|
|
|
|
dma_free_coherent(dev, flash_cmd.size, flash_cmd.va, flash_cmd.dma);
|
|
if (status) {
|
|
dev_err(dev, "Firmware load error\n");
|
|
return be_cmd_status(status);
|
|
}
|
|
|
|
dev_info(dev, "Firmware flashed successfully\n");
|
|
|
|
if (change_status == LANCER_FW_RESET_NEEDED) {
|
|
dev_info(dev, "Resetting adapter to activate new FW\n");
|
|
status = lancer_physdev_ctrl(adapter,
|
|
PHYSDEV_CONTROL_FW_RESET_MASK);
|
|
if (status) {
|
|
dev_err(dev, "Adapter busy, could not reset FW\n");
|
|
dev_err(dev, "Reboot server to activate new FW\n");
|
|
}
|
|
} else if (change_status != LANCER_NO_RESET_NEEDED) {
|
|
dev_info(dev, "Reboot server to activate new FW\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define UFI_TYPE2 2
|
|
#define UFI_TYPE3 3
|
|
#define UFI_TYPE3R 10
|
|
#define UFI_TYPE4 4
|
|
static int be_get_ufi_type(struct be_adapter *adapter,
|
|
struct flash_file_hdr_g3 *fhdr)
|
|
{
|
|
if (!fhdr)
|
|
goto be_get_ufi_exit;
|
|
|
|
if (skyhawk_chip(adapter) && fhdr->build[0] == '4')
|
|
return UFI_TYPE4;
|
|
else if (BE3_chip(adapter) && fhdr->build[0] == '3') {
|
|
if (fhdr->asic_type_rev == 0x10)
|
|
return UFI_TYPE3R;
|
|
else
|
|
return UFI_TYPE3;
|
|
} else if (BE2_chip(adapter) && fhdr->build[0] == '2')
|
|
return UFI_TYPE2;
|
|
|
|
be_get_ufi_exit:
|
|
dev_err(&adapter->pdev->dev,
|
|
"UFI and Interface are not compatible for flashing\n");
|
|
return -1;
|
|
}
|
|
|
|
static int be_fw_download(struct be_adapter *adapter, const struct firmware* fw)
|
|
{
|
|
struct flash_file_hdr_g3 *fhdr3;
|
|
struct image_hdr *img_hdr_ptr = NULL;
|
|
struct be_dma_mem flash_cmd;
|
|
const u8 *p;
|
|
int status = 0, i = 0, num_imgs = 0, ufi_type = 0;
|
|
|
|
flash_cmd.size = sizeof(struct be_cmd_write_flashrom);
|
|
flash_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, flash_cmd.size,
|
|
&flash_cmd.dma, GFP_KERNEL);
|
|
if (!flash_cmd.va) {
|
|
status = -ENOMEM;
|
|
goto be_fw_exit;
|
|
}
|
|
|
|
p = fw->data;
|
|
fhdr3 = (struct flash_file_hdr_g3 *)p;
|
|
|
|
ufi_type = be_get_ufi_type(adapter, fhdr3);
|
|
|
|
num_imgs = le32_to_cpu(fhdr3->num_imgs);
|
|
for (i = 0; i < num_imgs; i++) {
|
|
img_hdr_ptr = (struct image_hdr *)(fw->data +
|
|
(sizeof(struct flash_file_hdr_g3) +
|
|
i * sizeof(struct image_hdr)));
|
|
if (le32_to_cpu(img_hdr_ptr->imageid) == 1) {
|
|
switch (ufi_type) {
|
|
case UFI_TYPE4:
|
|
status = be_flash_skyhawk(adapter, fw,
|
|
&flash_cmd, num_imgs);
|
|
break;
|
|
case UFI_TYPE3R:
|
|
status = be_flash_BEx(adapter, fw, &flash_cmd,
|
|
num_imgs);
|
|
break;
|
|
case UFI_TYPE3:
|
|
/* Do not flash this ufi on BE3-R cards */
|
|
if (adapter->asic_rev < 0x10)
|
|
status = be_flash_BEx(adapter, fw,
|
|
&flash_cmd,
|
|
num_imgs);
|
|
else {
|
|
status = -EINVAL;
|
|
dev_err(&adapter->pdev->dev,
|
|
"Can't load BE3 UFI on BE3R\n");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ufi_type == UFI_TYPE2)
|
|
status = be_flash_BEx(adapter, fw, &flash_cmd, 0);
|
|
else if (ufi_type == -1)
|
|
status = -EINVAL;
|
|
|
|
dma_free_coherent(&adapter->pdev->dev, flash_cmd.size, flash_cmd.va,
|
|
flash_cmd.dma);
|
|
if (status) {
|
|
dev_err(&adapter->pdev->dev, "Firmware load error\n");
|
|
goto be_fw_exit;
|
|
}
|
|
|
|
dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
|
|
|
|
be_fw_exit:
|
|
return status;
|
|
}
|
|
|
|
int be_load_fw(struct be_adapter *adapter, u8 *fw_file)
|
|
{
|
|
const struct firmware *fw;
|
|
int status;
|
|
|
|
if (!netif_running(adapter->netdev)) {
|
|
dev_err(&adapter->pdev->dev,
|
|
"Firmware load not allowed (interface is down)\n");
|
|
return -ENETDOWN;
|
|
}
|
|
|
|
status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
|
|
if (status)
|
|
goto fw_exit;
|
|
|
|
dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file);
|
|
|
|
if (lancer_chip(adapter))
|
|
status = lancer_fw_download(adapter, fw);
|
|
else
|
|
status = be_fw_download(adapter, fw);
|
|
|
|
if (!status)
|
|
be_cmd_get_fw_ver(adapter);
|
|
|
|
fw_exit:
|
|
release_firmware(fw);
|
|
return status;
|
|
}
|
|
|
|
static int be_ndo_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(dev);
|
|
struct nlattr *attr, *br_spec;
|
|
int rem;
|
|
int status = 0;
|
|
u16 mode = 0;
|
|
|
|
if (!sriov_enabled(adapter))
|
|
return -EOPNOTSUPP;
|
|
|
|
br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
|
|
|
|
nla_for_each_nested(attr, br_spec, rem) {
|
|
if (nla_type(attr) != IFLA_BRIDGE_MODE)
|
|
continue;
|
|
|
|
mode = nla_get_u16(attr);
|
|
if (mode != BRIDGE_MODE_VEPA && mode != BRIDGE_MODE_VEB)
|
|
return -EINVAL;
|
|
|
|
status = be_cmd_set_hsw_config(adapter, 0, 0,
|
|
adapter->if_handle,
|
|
mode == BRIDGE_MODE_VEPA ?
|
|
PORT_FWD_TYPE_VEPA :
|
|
PORT_FWD_TYPE_VEB);
|
|
if (status)
|
|
goto err;
|
|
|
|
dev_info(&adapter->pdev->dev, "enabled switch mode: %s\n",
|
|
mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB");
|
|
|
|
return status;
|
|
}
|
|
err:
|
|
dev_err(&adapter->pdev->dev, "Failed to set switch mode %s\n",
|
|
mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB");
|
|
|
|
return status;
|
|
}
|
|
|
|
static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
|
|
struct net_device *dev, u32 filter_mask)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(dev);
|
|
int status = 0;
|
|
u8 hsw_mode;
|
|
|
|
if (!sriov_enabled(adapter))
|
|
return 0;
|
|
|
|
/* BE and Lancer chips support VEB mode only */
|
|
if (BEx_chip(adapter) || lancer_chip(adapter)) {
|
|
hsw_mode = PORT_FWD_TYPE_VEB;
|
|
} else {
|
|
status = be_cmd_get_hsw_config(adapter, NULL, 0,
|
|
adapter->if_handle, &hsw_mode);
|
|
if (status)
|
|
return 0;
|
|
}
|
|
|
|
return ndo_dflt_bridge_getlink(skb, pid, seq, dev,
|
|
hsw_mode == PORT_FWD_TYPE_VEPA ?
|
|
BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB);
|
|
}
|
|
|
|
#ifdef CONFIG_BE2NET_VXLAN
|
|
static void be_add_vxlan_port(struct net_device *netdev, sa_family_t sa_family,
|
|
__be16 port)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
struct device *dev = &adapter->pdev->dev;
|
|
int status;
|
|
|
|
if (lancer_chip(adapter) || BEx_chip(adapter))
|
|
return;
|
|
|
|
if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) {
|
|
dev_warn(dev, "Cannot add UDP port %d for VxLAN offloads\n",
|
|
be16_to_cpu(port));
|
|
dev_info(dev,
|
|
"Only one UDP port supported for VxLAN offloads\n");
|
|
return;
|
|
}
|
|
|
|
status = be_cmd_manage_iface(adapter, adapter->if_handle,
|
|
OP_CONVERT_NORMAL_TO_TUNNEL);
|
|
if (status) {
|
|
dev_warn(dev, "Failed to convert normal interface to tunnel\n");
|
|
goto err;
|
|
}
|
|
|
|
status = be_cmd_set_vxlan_port(adapter, port);
|
|
if (status) {
|
|
dev_warn(dev, "Failed to add VxLAN port\n");
|
|
goto err;
|
|
}
|
|
adapter->flags |= BE_FLAGS_VXLAN_OFFLOADS;
|
|
adapter->vxlan_port = port;
|
|
|
|
dev_info(dev, "Enabled VxLAN offloads for UDP port %d\n",
|
|
be16_to_cpu(port));
|
|
return;
|
|
err:
|
|
be_disable_vxlan_offloads(adapter);
|
|
}
|
|
|
|
static void be_del_vxlan_port(struct net_device *netdev, sa_family_t sa_family,
|
|
__be16 port)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (lancer_chip(adapter) || BEx_chip(adapter))
|
|
return;
|
|
|
|
if (adapter->vxlan_port != port)
|
|
return;
|
|
|
|
be_disable_vxlan_offloads(adapter);
|
|
|
|
dev_info(&adapter->pdev->dev,
|
|
"Disabled VxLAN offloads for UDP port %d\n",
|
|
be16_to_cpu(port));
|
|
}
|
|
|
|
static bool be_gso_check(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
return vxlan_gso_check(skb);
|
|
}
|
|
#endif
|
|
|
|
static const struct net_device_ops be_netdev_ops = {
|
|
.ndo_open = be_open,
|
|
.ndo_stop = be_close,
|
|
.ndo_start_xmit = be_xmit,
|
|
.ndo_set_rx_mode = be_set_rx_mode,
|
|
.ndo_set_mac_address = be_mac_addr_set,
|
|
.ndo_change_mtu = be_change_mtu,
|
|
.ndo_get_stats64 = be_get_stats64,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_vlan_rx_add_vid = be_vlan_add_vid,
|
|
.ndo_vlan_rx_kill_vid = be_vlan_rem_vid,
|
|
.ndo_set_vf_mac = be_set_vf_mac,
|
|
.ndo_set_vf_vlan = be_set_vf_vlan,
|
|
.ndo_set_vf_rate = be_set_vf_tx_rate,
|
|
.ndo_get_vf_config = be_get_vf_config,
|
|
.ndo_set_vf_link_state = be_set_vf_link_state,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = be_netpoll,
|
|
#endif
|
|
.ndo_bridge_setlink = be_ndo_bridge_setlink,
|
|
.ndo_bridge_getlink = be_ndo_bridge_getlink,
|
|
#ifdef CONFIG_NET_RX_BUSY_POLL
|
|
.ndo_busy_poll = be_busy_poll,
|
|
#endif
|
|
#ifdef CONFIG_BE2NET_VXLAN
|
|
.ndo_add_vxlan_port = be_add_vxlan_port,
|
|
.ndo_del_vxlan_port = be_del_vxlan_port,
|
|
.ndo_gso_check = be_gso_check,
|
|
#endif
|
|
};
|
|
|
|
static void be_netdev_init(struct net_device *netdev)
|
|
{
|
|
struct be_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (skyhawk_chip(adapter)) {
|
|
netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
|
|
NETIF_F_TSO | NETIF_F_TSO6 |
|
|
NETIF_F_GSO_UDP_TUNNEL;
|
|
netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
|
|
}
|
|
netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
|
|
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |
|
|
NETIF_F_HW_VLAN_CTAG_TX;
|
|
if (be_multi_rxq(adapter))
|
|
netdev->hw_features |= NETIF_F_RXHASH;
|
|
|
|
netdev->features |= netdev->hw_features |
|
|
NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER;
|
|
|
|
netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
|
|
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
|
|
|
|
netdev->priv_flags |= IFF_UNICAST_FLT;
|
|
|
|
netdev->flags |= IFF_MULTICAST;
|
|
|
|
netif_set_gso_max_size(netdev, 65535 - ETH_HLEN);
|
|
|
|
netdev->netdev_ops = &be_netdev_ops;
|
|
|
|
netdev->ethtool_ops = &be_ethtool_ops;
|
|
}
|
|
|
|
static void be_unmap_pci_bars(struct be_adapter *adapter)
|
|
{
|
|
if (adapter->csr)
|
|
pci_iounmap(adapter->pdev, adapter->csr);
|
|
if (adapter->db)
|
|
pci_iounmap(adapter->pdev, adapter->db);
|
|
}
|
|
|
|
static int db_bar(struct be_adapter *adapter)
|
|
{
|
|
if (lancer_chip(adapter) || !be_physfn(adapter))
|
|
return 0;
|
|
else
|
|
return 4;
|
|
}
|
|
|
|
static int be_roce_map_pci_bars(struct be_adapter *adapter)
|
|
{
|
|
if (skyhawk_chip(adapter)) {
|
|
adapter->roce_db.size = 4096;
|
|
adapter->roce_db.io_addr = pci_resource_start(adapter->pdev,
|
|
db_bar(adapter));
|
|
adapter->roce_db.total_size = pci_resource_len(adapter->pdev,
|
|
db_bar(adapter));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int be_map_pci_bars(struct be_adapter *adapter)
|
|
{
|
|
u8 __iomem *addr;
|
|
|
|
if (BEx_chip(adapter) && be_physfn(adapter)) {
|
|
adapter->csr = pci_iomap(adapter->pdev, 2, 0);
|
|
if (!adapter->csr)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
|
|
if (!addr)
|
|
goto pci_map_err;
|
|
adapter->db = addr;
|
|
|
|
be_roce_map_pci_bars(adapter);
|
|
return 0;
|
|
|
|
pci_map_err:
|
|
dev_err(&adapter->pdev->dev, "Error in mapping PCI BARs\n");
|
|
be_unmap_pci_bars(adapter);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void be_ctrl_cleanup(struct be_adapter *adapter)
|
|
{
|
|
struct be_dma_mem *mem = &adapter->mbox_mem_alloced;
|
|
|
|
be_unmap_pci_bars(adapter);
|
|
|
|
if (mem->va)
|
|
dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va,
|
|
mem->dma);
|
|
|
|
mem = &adapter->rx_filter;
|
|
if (mem->va)
|
|
dma_free_coherent(&adapter->pdev->dev, mem->size, mem->va,
|
|
mem->dma);
|
|
}
|
|
|
|
static int be_ctrl_init(struct be_adapter *adapter)
|
|
{
|
|
struct be_dma_mem *mbox_mem_alloc = &adapter->mbox_mem_alloced;
|
|
struct be_dma_mem *mbox_mem_align = &adapter->mbox_mem;
|
|
struct be_dma_mem *rx_filter = &adapter->rx_filter;
|
|
u32 sli_intf;
|
|
int status;
|
|
|
|
pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf);
|
|
adapter->sli_family = (sli_intf & SLI_INTF_FAMILY_MASK) >>
|
|
SLI_INTF_FAMILY_SHIFT;
|
|
adapter->virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
|
|
|
|
status = be_map_pci_bars(adapter);
|
|
if (status)
|
|
goto done;
|
|
|
|
mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
|
|
mbox_mem_alloc->va = dma_alloc_coherent(&adapter->pdev->dev,
|
|
mbox_mem_alloc->size,
|
|
&mbox_mem_alloc->dma,
|
|
GFP_KERNEL);
|
|
if (!mbox_mem_alloc->va) {
|
|
status = -ENOMEM;
|
|
goto unmap_pci_bars;
|
|
}
|
|
mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
|
|
mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
|
|
mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
|
|
memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
|
|
|
|
rx_filter->size = sizeof(struct be_cmd_req_rx_filter);
|
|
rx_filter->va = dma_zalloc_coherent(&adapter->pdev->dev,
|
|
rx_filter->size, &rx_filter->dma,
|
|
GFP_KERNEL);
|
|
if (!rx_filter->va) {
|
|
status = -ENOMEM;
|
|
goto free_mbox;
|
|
}
|
|
|
|
mutex_init(&adapter->mbox_lock);
|
|
spin_lock_init(&adapter->mcc_lock);
|
|
spin_lock_init(&adapter->mcc_cq_lock);
|
|
|
|
init_completion(&adapter->et_cmd_compl);
|
|
pci_save_state(adapter->pdev);
|
|
return 0;
|
|
|
|
free_mbox:
|
|
dma_free_coherent(&adapter->pdev->dev, mbox_mem_alloc->size,
|
|
mbox_mem_alloc->va, mbox_mem_alloc->dma);
|
|
|
|
unmap_pci_bars:
|
|
be_unmap_pci_bars(adapter);
|
|
|
|
done:
|
|
return status;
|
|
}
|
|
|
|
static void be_stats_cleanup(struct be_adapter *adapter)
|
|
{
|
|
struct be_dma_mem *cmd = &adapter->stats_cmd;
|
|
|
|
if (cmd->va)
|
|
dma_free_coherent(&adapter->pdev->dev, cmd->size,
|
|
cmd->va, cmd->dma);
|
|
}
|
|
|
|
static int be_stats_init(struct be_adapter *adapter)
|
|
{
|
|
struct be_dma_mem *cmd = &adapter->stats_cmd;
|
|
|
|
if (lancer_chip(adapter))
|
|
cmd->size = sizeof(struct lancer_cmd_req_pport_stats);
|
|
else if (BE2_chip(adapter))
|
|
cmd->size = sizeof(struct be_cmd_req_get_stats_v0);
|
|
else if (BE3_chip(adapter))
|
|
cmd->size = sizeof(struct be_cmd_req_get_stats_v1);
|
|
else
|
|
/* ALL non-BE ASICs */
|
|
cmd->size = sizeof(struct be_cmd_req_get_stats_v2);
|
|
|
|
cmd->va = dma_zalloc_coherent(&adapter->pdev->dev, cmd->size, &cmd->dma,
|
|
GFP_KERNEL);
|
|
if (!cmd->va)
|
|
return -ENOMEM;
|
|
return 0;
|
|
}
|
|
|
|
static void be_remove(struct pci_dev *pdev)
|
|
{
|
|
struct be_adapter *adapter = pci_get_drvdata(pdev);
|
|
|
|
if (!adapter)
|
|
return;
|
|
|
|
be_roce_dev_remove(adapter);
|
|
be_intr_set(adapter, false);
|
|
|
|
cancel_delayed_work_sync(&adapter->func_recovery_work);
|
|
|
|
unregister_netdev(adapter->netdev);
|
|
|
|
be_clear(adapter);
|
|
|
|
/* tell fw we're done with firing cmds */
|
|
be_cmd_fw_clean(adapter);
|
|
|
|
be_stats_cleanup(adapter);
|
|
|
|
be_ctrl_cleanup(adapter);
|
|
|
|
pci_disable_pcie_error_reporting(pdev);
|
|
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
free_netdev(adapter->netdev);
|
|
}
|
|
|
|
static int be_get_initial_config(struct be_adapter *adapter)
|
|
{
|
|
int status, level;
|
|
|
|
status = be_cmd_get_cntl_attributes(adapter);
|
|
if (status)
|
|
return status;
|
|
|
|
/* Must be a power of 2 or else MODULO will BUG_ON */
|
|
adapter->be_get_temp_freq = 64;
|
|
|
|
if (BEx_chip(adapter)) {
|
|
level = be_cmd_get_fw_log_level(adapter);
|
|
adapter->msg_enable =
|
|
level <= FW_LOG_LEVEL_DEFAULT ? NETIF_MSG_HW : 0;
|
|
}
|
|
|
|
adapter->cfg_num_qs = netif_get_num_default_rss_queues();
|
|
return 0;
|
|
}
|
|
|
|
static int lancer_recover_func(struct be_adapter *adapter)
|
|
{
|
|
struct device *dev = &adapter->pdev->dev;
|
|
int status;
|
|
|
|
status = lancer_test_and_set_rdy_state(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
if (netif_running(adapter->netdev))
|
|
be_close(adapter->netdev);
|
|
|
|
be_clear(adapter);
|
|
|
|
be_clear_all_error(adapter);
|
|
|
|
status = be_setup(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
if (netif_running(adapter->netdev)) {
|
|
status = be_open(adapter->netdev);
|
|
if (status)
|
|
goto err;
|
|
}
|
|
|
|
dev_err(dev, "Adapter recovery successful\n");
|
|
return 0;
|
|
err:
|
|
if (status == -EAGAIN)
|
|
dev_err(dev, "Waiting for resource provisioning\n");
|
|
else
|
|
dev_err(dev, "Adapter recovery failed\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
static void be_func_recovery_task(struct work_struct *work)
|
|
{
|
|
struct be_adapter *adapter =
|
|
container_of(work, struct be_adapter, func_recovery_work.work);
|
|
int status = 0;
|
|
|
|
be_detect_error(adapter);
|
|
|
|
if (adapter->hw_error && lancer_chip(adapter)) {
|
|
rtnl_lock();
|
|
netif_device_detach(adapter->netdev);
|
|
rtnl_unlock();
|
|
|
|
status = lancer_recover_func(adapter);
|
|
if (!status)
|
|
netif_device_attach(adapter->netdev);
|
|
}
|
|
|
|
/* In Lancer, for all errors other than provisioning error (-EAGAIN),
|
|
* no need to attempt further recovery.
|
|
*/
|
|
if (!status || status == -EAGAIN)
|
|
schedule_delayed_work(&adapter->func_recovery_work,
|
|
msecs_to_jiffies(1000));
|
|
}
|
|
|
|
static void be_worker(struct work_struct *work)
|
|
{
|
|
struct be_adapter *adapter =
|
|
container_of(work, struct be_adapter, work.work);
|
|
struct be_rx_obj *rxo;
|
|
int i;
|
|
|
|
/* when interrupts are not yet enabled, just reap any pending
|
|
* mcc completions */
|
|
if (!netif_running(adapter->netdev)) {
|
|
local_bh_disable();
|
|
be_process_mcc(adapter);
|
|
local_bh_enable();
|
|
goto reschedule;
|
|
}
|
|
|
|
if (!adapter->stats_cmd_sent) {
|
|
if (lancer_chip(adapter))
|
|
lancer_cmd_get_pport_stats(adapter,
|
|
&adapter->stats_cmd);
|
|
else
|
|
be_cmd_get_stats(adapter, &adapter->stats_cmd);
|
|
}
|
|
|
|
if (be_physfn(adapter) &&
|
|
MODULO(adapter->work_counter, adapter->be_get_temp_freq) == 0)
|
|
be_cmd_get_die_temperature(adapter);
|
|
|
|
for_all_rx_queues(adapter, rxo, i) {
|
|
/* Replenish RX-queues starved due to memory
|
|
* allocation failures.
|
|
*/
|
|
if (rxo->rx_post_starved)
|
|
be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST);
|
|
}
|
|
|
|
be_eqd_update(adapter);
|
|
|
|
reschedule:
|
|
adapter->work_counter++;
|
|
schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
|
|
}
|
|
|
|
/* If any VFs are already enabled don't FLR the PF */
|
|
static bool be_reset_required(struct be_adapter *adapter)
|
|
{
|
|
return pci_num_vf(adapter->pdev) ? false : true;
|
|
}
|
|
|
|
static char *mc_name(struct be_adapter *adapter)
|
|
{
|
|
char *str = ""; /* default */
|
|
|
|
switch (adapter->mc_type) {
|
|
case UMC:
|
|
str = "UMC";
|
|
break;
|
|
case FLEX10:
|
|
str = "FLEX10";
|
|
break;
|
|
case vNIC1:
|
|
str = "vNIC-1";
|
|
break;
|
|
case nPAR:
|
|
str = "nPAR";
|
|
break;
|
|
case UFP:
|
|
str = "UFP";
|
|
break;
|
|
case vNIC2:
|
|
str = "vNIC-2";
|
|
break;
|
|
default:
|
|
str = "";
|
|
}
|
|
|
|
return str;
|
|
}
|
|
|
|
static inline char *func_name(struct be_adapter *adapter)
|
|
{
|
|
return be_physfn(adapter) ? "PF" : "VF";
|
|
}
|
|
|
|
static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
|
|
{
|
|
int status = 0;
|
|
struct be_adapter *adapter;
|
|
struct net_device *netdev;
|
|
char port_name;
|
|
|
|
dev_info(&pdev->dev, "%s version is %s\n", DRV_NAME, DRV_VER);
|
|
|
|
status = pci_enable_device(pdev);
|
|
if (status)
|
|
goto do_none;
|
|
|
|
status = pci_request_regions(pdev, DRV_NAME);
|
|
if (status)
|
|
goto disable_dev;
|
|
pci_set_master(pdev);
|
|
|
|
netdev = alloc_etherdev_mqs(sizeof(*adapter), MAX_TX_QS, MAX_RX_QS);
|
|
if (!netdev) {
|
|
status = -ENOMEM;
|
|
goto rel_reg;
|
|
}
|
|
adapter = netdev_priv(netdev);
|
|
adapter->pdev = pdev;
|
|
pci_set_drvdata(pdev, adapter);
|
|
adapter->netdev = netdev;
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
|
|
if (!status) {
|
|
netdev->features |= NETIF_F_HIGHDMA;
|
|
} else {
|
|
status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (status) {
|
|
dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
|
|
goto free_netdev;
|
|
}
|
|
}
|
|
|
|
status = pci_enable_pcie_error_reporting(pdev);
|
|
if (!status)
|
|
dev_info(&pdev->dev, "PCIe error reporting enabled\n");
|
|
|
|
status = be_ctrl_init(adapter);
|
|
if (status)
|
|
goto free_netdev;
|
|
|
|
/* sync up with fw's ready state */
|
|
if (be_physfn(adapter)) {
|
|
status = be_fw_wait_ready(adapter);
|
|
if (status)
|
|
goto ctrl_clean;
|
|
}
|
|
|
|
if (be_reset_required(adapter)) {
|
|
status = be_cmd_reset_function(adapter);
|
|
if (status)
|
|
goto ctrl_clean;
|
|
|
|
/* Wait for interrupts to quiesce after an FLR */
|
|
msleep(100);
|
|
}
|
|
|
|
/* Allow interrupts for other ULPs running on NIC function */
|
|
be_intr_set(adapter, true);
|
|
|
|
/* tell fw we're ready to fire cmds */
|
|
status = be_cmd_fw_init(adapter);
|
|
if (status)
|
|
goto ctrl_clean;
|
|
|
|
status = be_stats_init(adapter);
|
|
if (status)
|
|
goto ctrl_clean;
|
|
|
|
status = be_get_initial_config(adapter);
|
|
if (status)
|
|
goto stats_clean;
|
|
|
|
INIT_DELAYED_WORK(&adapter->work, be_worker);
|
|
INIT_DELAYED_WORK(&adapter->func_recovery_work, be_func_recovery_task);
|
|
adapter->rx_fc = true;
|
|
adapter->tx_fc = true;
|
|
|
|
status = be_setup(adapter);
|
|
if (status)
|
|
goto stats_clean;
|
|
|
|
be_netdev_init(netdev);
|
|
status = register_netdev(netdev);
|
|
if (status != 0)
|
|
goto unsetup;
|
|
|
|
be_roce_dev_add(adapter);
|
|
|
|
schedule_delayed_work(&adapter->func_recovery_work,
|
|
msecs_to_jiffies(1000));
|
|
|
|
be_cmd_query_port_name(adapter, &port_name);
|
|
|
|
dev_info(&pdev->dev, "%s: %s %s port %c\n", nic_name(pdev),
|
|
func_name(adapter), mc_name(adapter), port_name);
|
|
|
|
return 0;
|
|
|
|
unsetup:
|
|
be_clear(adapter);
|
|
stats_clean:
|
|
be_stats_cleanup(adapter);
|
|
ctrl_clean:
|
|
be_ctrl_cleanup(adapter);
|
|
free_netdev:
|
|
free_netdev(netdev);
|
|
rel_reg:
|
|
pci_release_regions(pdev);
|
|
disable_dev:
|
|
pci_disable_device(pdev);
|
|
do_none:
|
|
dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev));
|
|
return status;
|
|
}
|
|
|
|
static int be_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct be_adapter *adapter = pci_get_drvdata(pdev);
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
if (adapter->wol_en)
|
|
be_setup_wol(adapter, true);
|
|
|
|
be_intr_set(adapter, false);
|
|
cancel_delayed_work_sync(&adapter->func_recovery_work);
|
|
|
|
netif_device_detach(netdev);
|
|
if (netif_running(netdev)) {
|
|
rtnl_lock();
|
|
be_close(netdev);
|
|
rtnl_unlock();
|
|
}
|
|
be_clear(adapter);
|
|
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
return 0;
|
|
}
|
|
|
|
static int be_resume(struct pci_dev *pdev)
|
|
{
|
|
int status = 0;
|
|
struct be_adapter *adapter = pci_get_drvdata(pdev);
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
netif_device_detach(netdev);
|
|
|
|
status = pci_enable_device(pdev);
|
|
if (status)
|
|
return status;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
|
|
status = be_fw_wait_ready(adapter);
|
|
if (status)
|
|
return status;
|
|
|
|
be_intr_set(adapter, true);
|
|
/* tell fw we're ready to fire cmds */
|
|
status = be_cmd_fw_init(adapter);
|
|
if (status)
|
|
return status;
|
|
|
|
be_setup(adapter);
|
|
if (netif_running(netdev)) {
|
|
rtnl_lock();
|
|
be_open(netdev);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
schedule_delayed_work(&adapter->func_recovery_work,
|
|
msecs_to_jiffies(1000));
|
|
netif_device_attach(netdev);
|
|
|
|
if (adapter->wol_en)
|
|
be_setup_wol(adapter, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* An FLR will stop BE from DMAing any data.
|
|
*/
|
|
static void be_shutdown(struct pci_dev *pdev)
|
|
{
|
|
struct be_adapter *adapter = pci_get_drvdata(pdev);
|
|
|
|
if (!adapter)
|
|
return;
|
|
|
|
be_roce_dev_shutdown(adapter);
|
|
cancel_delayed_work_sync(&adapter->work);
|
|
cancel_delayed_work_sync(&adapter->func_recovery_work);
|
|
|
|
netif_device_detach(adapter->netdev);
|
|
|
|
be_cmd_reset_function(adapter);
|
|
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev,
|
|
pci_channel_state_t state)
|
|
{
|
|
struct be_adapter *adapter = pci_get_drvdata(pdev);
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
dev_err(&adapter->pdev->dev, "EEH error detected\n");
|
|
|
|
if (!adapter->eeh_error) {
|
|
adapter->eeh_error = true;
|
|
|
|
cancel_delayed_work_sync(&adapter->func_recovery_work);
|
|
|
|
rtnl_lock();
|
|
netif_device_detach(netdev);
|
|
if (netif_running(netdev))
|
|
be_close(netdev);
|
|
rtnl_unlock();
|
|
|
|
be_clear(adapter);
|
|
}
|
|
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
/* The error could cause the FW to trigger a flash debug dump.
|
|
* Resetting the card while flash dump is in progress
|
|
* can cause it not to recover; wait for it to finish.
|
|
* Wait only for first function as it is needed only once per
|
|
* adapter.
|
|
*/
|
|
if (pdev->devfn == 0)
|
|
ssleep(30);
|
|
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
|
|
{
|
|
struct be_adapter *adapter = pci_get_drvdata(pdev);
|
|
int status;
|
|
|
|
dev_info(&adapter->pdev->dev, "EEH reset\n");
|
|
|
|
status = pci_enable_device(pdev);
|
|
if (status)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
pci_set_master(pdev);
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
|
|
/* Check if card is ok and fw is ready */
|
|
dev_info(&adapter->pdev->dev,
|
|
"Waiting for FW to be ready after EEH reset\n");
|
|
status = be_fw_wait_ready(adapter);
|
|
if (status)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
pci_cleanup_aer_uncorrect_error_status(pdev);
|
|
be_clear_all_error(adapter);
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
static void be_eeh_resume(struct pci_dev *pdev)
|
|
{
|
|
int status = 0;
|
|
struct be_adapter *adapter = pci_get_drvdata(pdev);
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
dev_info(&adapter->pdev->dev, "EEH resume\n");
|
|
|
|
pci_save_state(pdev);
|
|
|
|
status = be_cmd_reset_function(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
/* On some BE3 FW versions, after a HW reset,
|
|
* interrupts will remain disabled for each function.
|
|
* So, explicitly enable interrupts
|
|
*/
|
|
be_intr_set(adapter, true);
|
|
|
|
/* tell fw we're ready to fire cmds */
|
|
status = be_cmd_fw_init(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = be_setup(adapter);
|
|
if (status)
|
|
goto err;
|
|
|
|
if (netif_running(netdev)) {
|
|
status = be_open(netdev);
|
|
if (status)
|
|
goto err;
|
|
}
|
|
|
|
schedule_delayed_work(&adapter->func_recovery_work,
|
|
msecs_to_jiffies(1000));
|
|
netif_device_attach(netdev);
|
|
return;
|
|
err:
|
|
dev_err(&adapter->pdev->dev, "EEH resume failed\n");
|
|
}
|
|
|
|
static const struct pci_error_handlers be_eeh_handlers = {
|
|
.error_detected = be_eeh_err_detected,
|
|
.slot_reset = be_eeh_reset,
|
|
.resume = be_eeh_resume,
|
|
};
|
|
|
|
static struct pci_driver be_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = be_dev_ids,
|
|
.probe = be_probe,
|
|
.remove = be_remove,
|
|
.suspend = be_suspend,
|
|
.resume = be_resume,
|
|
.shutdown = be_shutdown,
|
|
.err_handler = &be_eeh_handlers
|
|
};
|
|
|
|
static int __init be_init_module(void)
|
|
{
|
|
if (rx_frag_size != 8192 && rx_frag_size != 4096 &&
|
|
rx_frag_size != 2048) {
|
|
printk(KERN_WARNING DRV_NAME
|
|
" : Module param rx_frag_size must be 2048/4096/8192."
|
|
" Using 2048\n");
|
|
rx_frag_size = 2048;
|
|
}
|
|
|
|
return pci_register_driver(&be_driver);
|
|
}
|
|
module_init(be_init_module);
|
|
|
|
static void __exit be_exit_module(void)
|
|
{
|
|
pci_unregister_driver(&be_driver);
|
|
}
|
|
module_exit(be_exit_module);
|